SEARCH · USGS Science

Results for “Nature Water”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 379 records · Page 21Linked to original sources

USGS1991

An analytical method for hydrogeochemical surveys: Inductively coupled plasma-atomic emission spectrometry after using enrichment coprecipitation with cobalt and ammonium pyrrolidine dithiocarbamate

Trace metals that are commonly associated with mineralization were concentrated and separated from natural water by coprecipitation with ammonium pyrollidine dithiocarbamate (APDC) and cobalt and determined by inductively coupled plasma-atomic emission spectroscopy (ICP-AES). The method is useful in hydrogeochemical surveys because it permits preconcentration near the sample sites, and selected metals are preserved shortly after the samples are collected. The procedure is relatively simple: (1) a liter of water is filtered; (2) the pH is adjusted; (3) Co chloride and APDC are added to coprecipitate the trace metals; and (4) later, the precipitate is filtered, dissolved, and diluted to 10 ml for a 100-fold concentration enrichment of the separated metals. Sb(III), As(III), Cd, Cr, Cu, Fe, Pb, Mo, Ni, Ag, V, and Zn can then be determined simultaneously by ICP-AES. In an experiment designed to measure the coprecipitation efficiency, Sb(III), Cd and Ag were recovered at 70 to 75% of their original concentration. The remaining metals were recovered at 85 to 100% of their original concentrations, however. The range for the lower limits of determination for the metals after preconcentration is 0.1 to 3.0 μg/l.

Journal of Geochemical Exploration↗

USGS2006

Geochemical evolution of solutions derived from experimental weathering of sulfide-bearing rocks

The chemical composition of natural waters is affected by the weathering of geologic materials at or near the surface of the Earth. Laboratory weathering experiments of whole-rock sulfide rocks from the Shoe-Basin Mine (SBM) and the Pennsylvania Mine (PM) from the Peru Creek Basin, Summit County, Colorado, indicate that the mineral composition of the sulfide rocks, changes in pH, the duration of the experiment, and the formation of sorbents such as Fe and Al oxyhydroxides affect the chemical composition of the resulting solution. Carbonate minerals in the rock from SBM provide buffering capacity to the solution, contribute to increases in the pH and enhance the formation of Fe and Al oxyhydroxides, which sorb cations from solution. The final solution pH obtained in the experiments was similar to those measured in the field (i.e., 2.8 for PM and 5.0 for SBM). At PM, acidic, metal-rich mine effluent is discharged into Peru Creek where it mixes with stream water. As a result, the pH of the effluent increases causing Fe and Al oxyhydroxide and schwertmannite to precipitate. The resulting solids sorb metal cations from the water thereby improving the quality of the water in Peru Creek. ?? 2006.

Applied Geochemistry↗

USGS2005

Geochemistry of speleothem records from southern Illinois: Development of (234U)/(238U) as a proxy for paleoprecipitation

Natural waters universally show fractionation of uranium series (U-series) parent-daughter pairs, with the disequilibrium between 234U and 238U (234U)/(238U) commonly used as a tracer of groundwater flow. Because speleothems provide a temporal record of geochemical variations in groundwater precipitating calcite, (234U)/(238U) variations in speleothems provide a unique method of investigating water-rock interaction processes over millennium time scales. We present high precision Thermal Ionization Mass Spectrometric (TIMS) U-series analyses of speleothems and drip waters from Fogelpole Cave in southern Illinois. Data from all speleothems from the cave show an inverse correlation between (234U)/(238U) and U concentration, following the pattern observed in groundwaters globally. Within a 65-cm-long stalagmite, concordant 234U-238 U-230Th and 235U-231Pa ages for 5 samples indicate accurate chronology from 78.5 ka to 30 ka. Notably, (234U)/(238U)o which differs from most speleothems by having (234U)/(238U)o <1, positively correlates with speleothem growth rate. We generalize this to the observation that speleothems globally show (234U)/ (238U)o deviating farther from secular equilibrium at lower growth rates and approaching secular equilibrium at higher grow rates. Based on the Fogelpole observations, we suggest that groundwater (234U)/(238U) is controlled by the U oxidation state, the U concentration of the water and the fluid velocity. A transport model whereby U-series nuclides react and exchange with mineral surfaces can reproduce the observed trend between growth rate and (234U)/(238U)o. Based on this result, we suggest that (234U)/(238U)o in speleothems may record changes in hydrologic flux with time and thus could provide a useful proxy for long term records of paleoprecipitation. ?? 2005 Elsevier B.V. All rights reserved.

Chemical Geology↗

USGS2007

Separation of copper, iron, and zinc from complex aqueous solutions for isotopic measurement

The measurement of Cu, Fe, and Zn isotopes in natural samples may provide valuable information about biogeochemical processes in the environment. However, the widespread application of stable Cu, Fe, and Zn isotope chemistry to natural water systems remains limited by our ability to efficiently separate these trace elements from the greater concentrations of matrix elements. In this study, we present a new method for the isolation of Cu, Fe, and Zn from complex aqueous solutions using a single anion-exchange column with hydrochloric acid media. Using this method we are able to quantitatively separate Cu, Fe, and Zn from each other and from matrix elements in a single column elution. Elution of the elements of interest, as well as all other elements, through the anion-exchange column is a function of the speciation of each element in the various concentrations of HCl. We highlight the column chemistry by comparing our observations with published studies that have investigated the speciation of Cu, Fe, and Zn in chloride solutions. The functionality of the column procedure was tested by measuring Cu, Fe, and Zn isotopes in a variety of stream water samples impacted by acid mine drainage. The accuracy and precision of Zn isotopic measurements was tested by doping Zn-free stream water with the Zn isotopic standard. The reproducibility of the entire column separation process and the overall precision of the isotopic measurements were also evaluated. The isotopic results demonstrate that the Cu, Fe, and Zn column separates from the tested stream waters are of sufficient purity to be analyzed directly using a multicollector inductively coupled plasma mass spectrometer (MC-ICP-MS), and that the measurements are fully-reproducible, accurate, and precise. Although limited in scope, these isotopic measurements reveal significant variations in δ 65 Cu (− 1.41 to + 0.30‰), δ 56 Fe (− 0.56 to + 0.34‰), and δ 66 Zn (0.31 to 0.49‰) among samples collected from different abandoned mines within a single watershed. Hence, Cu, Fe, and Zn isotopic measurements may be a powerful tool for fingerprinting specific metal sources and/or examining biogeochemical reactions within fresh water systems.

Chemical Geology↗

USGSDate not supplied

Detecting sulfamethoxazole and carbamazepine in groundwater: Is ELISA a reliable screening tool?

In recent years, numerous studies have reported the prevalence of organic micropollutants in natural waters. There is an increasing interest in assessing the occurrence and transport of these contaminants in groundwater because a large number of people in the United States rely on groundwater for their drinking water. However, commonly used mass-spectrometry-based analytical methods are expensive and time-consuming. The enzyme-linked immunosorbent assay (ELISA) method offers an inexpensive analytical alternative that provides semi-quantitative results in a relatively quick timeframe. We investigated the use of ELISA for two commonly detected micropollutants, sulfamethoxazole (SMX) and carbamazepine (CBZ), in groundwater collected as part of two different studies, one in Minnesota and the other in Iowa. The ELISA results were compared with two mass-spectrometry-based methods: (1) direct aqueous injection-high performance liquid chromatography/tandem mass spectrometry (HPLC) and (2) online solid-phase extraction with liquid chromatography/electrospray ionization-mass spectrometry (SPE LC). Differences in SMX and CBZ observations between ELISA and both HPLC and SPE LC were analyzed using the Paired Prentice-Wilcoxon test. Estimates of bias and limits of agreement between paired observations also were calculated. The SMX determinations by ELISA yielded results that were 30 and 14% greater than HPLC and SPE LC, respectively. The CBZ determinations by ELISA yielded results that were 25 and 9% greater than HPLC and SPE LC, respectively. The ELISA determinations were in presence-absence agreement with HPLC for 83% of samples for SMX and CBZ; and with SPE LC for 76 and 80% of samples for SMX and CBZ, respectively. Results indicate that ELISA for SMX and CBZ is a reliable and cost effective screening-tool alternative to more commonly used mass spectrometry-based analytical methods.

Environmental Pollution↗

USGS2019

Atrazine induced transgenerational reproductive effects in medaka (Oryzias latipes)

Atrazine is presently one of the most abundantly used herbicides in the United States, and a common contaminant of natural water bodies and drinking waters in high-use areas. Dysregulation of reproductive processes has been demonstrated in atrazine exposed fish, including alteration of key endocrine pathways on hypothalamic-pituitary-gonadal (HPG) axis. However, the potential for atrazine-induced transgenerational inheritance of reproductive effects in fish has not been investigated. The present study examined the effects of early developmental atrazine exposure on transgenerational reproductive dysregulation in Japanese medaka ( Oryzias latipes ). F0 medaka were exposed to atrazine (ATZ, 5 or 50 μg/L), 17α-ethinylestradiol (EE2, 0.002 or 0.05 μg/L), or solvent control during the first twelve days of development with no subsequent exposure over three generations. This exposure overlapped with the critical developmental window for embryonic germ cell development, gonadogenesis, and sex determination. Exposed males and females of the F0 generation were bred to produce an F1 generation, and this was continued until the F2 generation. Sperm count and motility were not affected in F0 males; however, both parameters were significantly reduced in the males from F2 Low EE2 (0.002 μg/L), Low ATZ (5 μg/L), and High ATZ (50 μg/L) lineages. Fecundity was unaffected by atrazine or EE2 in F0 through F2 generations; however, fertilization rate was decreased in low atrazine and EE2 exposure lineages in the F2 generation. There were significant transgenerational differences in expression of the genes involved in steroidogenesis and DNA methylation. These results suggest that although early life exposure to atrazine did not cause significant phenotypes in the directly exposed F0 generation, subsequent generations of fish were at greater risk of reproductive dysfunction.

Environmental Pollution↗

USGS2010

Rate of formation and dissolution of mercury sulfide nanoparticles: The dual role of natural organic matter

Mercury is a global contaminant of concern due to its transformation by microorganisms to form methylmercury, a toxic species that accumulates in biological tissues. The effect of dissolved organic matter (DOM) isolated from natural waters on reactions between mercury(II) (Hg) and sulfide (S(-II)) to form HgS (s) nanoparticles across a range of Hg and S(-II) concentrations was investigated. Hg was equilibrated with DOM, after which S(-II) was added. Dissolved Hg (Hg aq ) was periodically quantified using ultracentrifugation and chemical analysis following the addition of S(-II). Particle size and identity were determined using dynamic light scattering and X-ray absorption spectroscopy. S(-II) reacts with Hg to form 20 to 200nm aggregates consisting of 1-2 nm HgS (s) subunits that are more structurally disordered than metacinnabar in the presence of 2 x 10 -9 to 8 x 10 -6 M Hg and 10 (mg C)L -1 DOM. Some of the HgS(s) nanoparticle aggregates are subsequently dissolved by DOM and (re)precipitated by S(-II) over periods of hours to days. At least three fractions of Hg-DOM species were observed with respect to reactivity toward S(-II): 0.3 μmol reactive Hg per mmol C (60 percent), 0.1 μmol per mmol C (20 percent) that are kinetically hindered, and another 0.1 μmol Hg per mmol C (20 percent) that are inert to reaction with S(-II). Following an initial S(-II)-driven precipitation of HgS (s) , HgS (s) was dissolved by DOM or organic sulfur compounds. HgS (s) formation during this second phase was counterintuitively favored by lower S(-II) concentrations, suggesting surface association of DOM moieties that are less capable of dissolving HgS (s) . DOM partially inhibits HgS(s) formation and mediates reactions between Hg and S(-II) such that HgS (s) is susceptible to dissolution. These findings indicate that Hg accessibility to microorganisms could be controlled by kinetic (intermediate) species in the presence of S(-II) and DOM, undermining the premise that equilibrium Hg species distributions should correlate to the extent or rate of Hg methylation in soils and sediments.

Geochimica et Cosmochimica Acta↗

USGS2021

Regional occurrence of aqueous tungsten and relations with antimony, arsenic and molybdenum concentrations (Sardinia, Italy)

T ungsten (W) is rarely found in natural waters, yet it can be introduced into the food chain and cause potentially toxic effects. Uptake of W by plants and vegetables, or trace presence of W in drinking water are possible vectors for ingestion of W by humans. The latter is recognized as a possible cause of lymphatic leukemia. Increased uses of W might result in a degradation of water resources, with attendant adverse effects on biota and human health. Therefore, this study was aimed at investigating regional occurrence and speciation of W in aquatic systems in Sardinia, Italy, factors affecting W mobility and possible relations with other oxyanion-forming trace elements such as Sb, As and Mo. Although our results are specifically from Sardinia, the implications are broader and should prompt future studies in other areas with known high W concentrations. A total of 350 sample sites are reported here, including surface waters, groundwaters, mine drainages, thermal waters and local seawater. The waters were analyzed for major and trace components, including W, Sb, As and Mo. The waters showed a variety of major chemical compositions and W concentrations. High concentrations of W were found in some mine waters and drainages from slag heaps, with W, Sb and As up to 140, 5000 and 800 μg L −1 , respectively. The highest concentrations of W occurred under slightly alkaline pH and oxygenated conditions, and were likely due to the dissolution of scheelite [CaWO 4 ] hosted in materials with which the water came into contact. High W concentrations also were observed in thermal waters, under alkaline pH and reducing conditions, and sometimes coincided with relatively high concentrations either of As or Mo. Previous studies of W geochemistry have focused on WO 4 2− as the major dissolved form of W. For this study, we have augmented the thermodynamic database in PHREEQC to include possible formation of many other W-bearing complexes gleaned from the literature. The results of the speciation calculations with the newly added complexation reactions shows that the neutral species CaWO 4 ° and MgWO 4 ° are particularly dominant in most W-bearing waters and lead to undersaturation with respect to scheelite and other W-bearing minerals. Assessing W contamination in water systems and establishing W limits in drinking water may prevent potential adverse effects of W on human and ecosystem health.

Sardinia↗

USGS1997

Carbon isotopes in biological carbonates: Respiration and photosynthesis

Respired carbon dioxide is an important constituent in the carbonates of most air breathing animals but is much less important in the carbonates of most aquatic animals. This difference is illustrated using carbon isotope data from freshwater and terrestrial snails, ahermatypic corals, and chemoautotrophic and methanotrophic pelecypods. Literature data from fish otoliths and bird and mammal shell and bone carbonates are also considered. Environmental CO 2 /O 2 ratios appear to be the major controlling variable. Atmospheric CO 2 /O 2 ratios are about thirty times lower than in most natural waters, hence air breathing animals absorb less environmental CO 2 in the course of obtaining 0 2 . Tissue CO 2 therefore, does not isotopically equilibrate with environmental CO 2 as thoroughly in air breathers as in aquatic animals, and this is reflected in skeletal carbonates. Animals having efficient oxygen transport systems, such as vertebrates, also accumulate more respired CO 2 in their tissues. Photosynthetic corals calcify mainly during the daytime when photosynthetic CO 2 uptake is several times faster than respiratory CO 2 release. Photosynthesis, therefore, affects skeletal δ 13 C more strongly than does respiration. Corals also illustrate how “metabolic” effects on skeletal isotopic composition can be estimated, despite the presence of much larger “kinetic” isotope effects.

Nevada↗

USGS2003

Mass spectrometric identification of an azobenzene derivative produced by smectite-catalyzed conversion of 3-amino-4-hydroxyphenylarsonic acid

The compound 3-amino-4-hydroxyphenylarsonic acid (3-amino-HPAA) reacts with smectite to form a soluble azobenzene arsonic acid compound. This reaction is of particular interest because it provides a possible mechanism for the formation of a new type of arsenic compound in natural water systems. 3-Amino-HPAA is a degradation product excreted by chickens that are fed rations amended with roxarsone. Roxarsone is used to control coccidial intestinal parasites in most of the broiler chickens grown in the United States. The structure of the azobenzene arsonic acid compound was first inferred from negative-ion and positive-ion low-resolution mass-spectrometric analyses of the supernatant of the smectite suspension. Elemental composition of the parent ion determined by high-resolution positive-ion mass spectrometric measurements was consistent with the proposed structure of the azobenzene arsonic acid compound.

Talanta↗

USGS1983

Complexation of copper by aquatic humic substances from different environments

The copper-complexing properties of aquatic humic substances isolated from eighteen different environments were characterized by potentiometric titration, using a cupric ion selective electrode. Potentiometric data were analyzed using FITEQL, a computer program for the determination of chemical equilibrium constants from experimental data. All the aquatic humic substances could be modelled as having two types of Cu(II)-binding sites: one with K equal to about 10 6 and a concentration of 1.0 ± 0.4 × 10 −6 M(mg C) −1 and another with K equal to about 10 8 and a concentration of 2.6 ± 1.6 × 10 −7 M(mg C) −1 . A method is described for estimating the Cu(II)-binding sites associated with dissolved humic substances in natural water based on a measurement of dissolved organic carbon, which may be helpful in evaluating chemical processes controlling speciation of Cu and bioavailability of Cu to aquatic organisms.

Science of the Total Environment↗

USGS2002

Stable isotope dilution analysis of hydrologic samples by inductively coupled plasma mass spectrometry

Inductively coupled plasma mass spectrometry is employed in the determination of Ni, Cu, Sr, Cd, Ba, Ti, and Pb in nonsaline, natural water samples by stable isotope dilution analysis. Hydrologic samples were directly analyzed without any unusual pretreatment. Interference effects related to overlapping isobars, formation of metal oxide and multiply charged ions, and matrix composition were identified and suitable methods of correction evaluated. A comparability study snowed that single-element isotope dilution analysis was only marginally better than sequential multielement isotope dilution analysis. Accuracy and precision of the single-element method were determined on the basis of results obtained for standard reference materials. The instrumental technique was shown to be ideally suited for programs associated with certification of standard reference materials.

Analytical Chemistry↗

USGS1996

Determination of 15N/14N and 13C/12C in solid and aqueous cyanides

The stable isotopic compositions of nitrogen and carbon in cyanide compounds can be determined by combusting aliquots in sealed tubes to form N 2 gas and CO 2 gas and analyzing the gases by mass spectrometry. Free cyanide (CN - aq + HCN aq ) in simple solutions can also be analyzed by first precipitating the cyanide as copper(II) ferrocyanide and then combusting the precipitate. Reproducibility is ±0.5‰ or better for both δ 15 N and δ 13 C. If empirical corrections are made on the basis of carbon yields, the reproducibility of δ 13 C can be improved to ±0.2‰. The analytical methods described herein are sufficiently accurate and precise to apply stable isotope techniques to problems of cyanide degradation in natural waters and industrial process solutions.

Analytical Chemistry↗

USGS2025

Regenerable membrane sensors for ultrasensitive nanoplastic quantification enabled by a data-driven Raman spectral processing algorithm

The detection of nanoplastics (NPs) in complex natural water systems is hindered by matrix interferences and limitations in current analytical techniques. This study presents Pre_seg, a Raman spectral processing algorithm integrated with regenerable anodic aluminum oxide (AAO) membrane sensors, for ultrasensitive, rapid, and quantitative NP detection at the single-particle level. The AAO membranes function as both filtration substrates and Raman sensors, reducing sample loss and contamination. Pre_seg incorporates statistically determined thresholds for signal-to-noise ratios (SNRs) and full width at half maximums (fwhms) across segmented spectral ranges, effectively minimizing noise and enhancing accuracy and sensitivity of NP detection. Pre_seg achieved 93.5% prediction accuracy of NPs and ≥90.4% rejection accuracy for non-NP entries. Mixed NPs were quantified at the lowest concentration of 0.5 μg L –1 . The robustness of Pre_seg was validated in eutrophic and oligotrophic lake matrices following oxidation digestion pretreatment to mitigate organic interferences. Furthermore, the AAO membrane sensors demonstrated stability through multiple regeneration and reuse cycles. This innovative approach advances NP detection by enabling scalable, customizable, and environmentally relevant monitoring.

Environmental Science and Technology↗

USGS2011

Quantification of a male sea lamprey pheromone in tributaries of Laurentian Great Lakes by liquid chromatography-tandem mass spectrometry

We developed an assay for measuring 7α,12α,24-trihydroxy-5a-cholan-3-one-24-sulfate (3kPZS), a mating pheromone released by male sea lampreys (Petromyzon marinus), at low picomolar concentrations in natural waters to assess the presence of invasive populations. 3kPZS was extracted from streamwater at a rate of recovery up to 90% using a single cation-exchange and reversed-phase mixed-mode cartridge, along with [ 2 H 5 ]3kPZS as an internal standard, and quantified using ultrahigh performance liquid chromatography-tandem mass spectrometry. The limit of detection was below 0.1 ng L –1 (210 fM), which was the lowest concentration tested. Intra- and interday coefficients of variation were between 0.3–11.6% and 4.8–9.8%, respectively, at 1 ng 3kPZS L –1 and 5 ng 3kPZS L –1 . This assay was validated by repeat measurements of water samples from a stream spiked with synthesized 3kPZS to reach 4.74 ng L –1 or 0.24 ng L –1 . We further verified the utility of this assay to detect spawning populations of lampreys; in the seven tributaries to the Laurentian Great Lakes sampled, 3kPZS concentrations were found to range between 0.15 and 2.85 ng L –1 during the spawning season in known sea lamprey infested segments and were not detectable in uninfested segments. The 3kPZS assay may be useful for the integrated management of sea lamprey, an invasive species in the Great Lakes where pheromone-based control and assessment techniques are desired.

Environmental Science & Technology↗

USGS1997

Binding of pyrene to aquatic and commercial humic substances: The role of molecular weight and aromaticity

The binding of pyrene to a number of humic substances isolated from various aquatic sources and a commercial humic acid was measured using the solubility enhancement method. The humic materials used in this study were characterized by various spectroscopic and liquid chromatography methods. A strong correlation was observed between the pyrene binding coefficient, K(doc), and the molecular weights, molar absorptivities at 280 nm, and aromaticity of the aquatic humic substances. Binding of pyrene to the commercial humic acid, however, was significantly stronger and did not obey the relationships observed between K(doc) and the chemical properties of the aquatic humic substrates. These results suggest that the molecular weight and the aromatic content of the humic substrates exert influences on the binding of nonpolar and planar aromatic molecules and that the physicochemical properties of both humic materials and organic solutes are important in controlling the speciation of nonpolar organic contaminants in natural waters.

Environmental Science & Technology↗

USGS1997

Matrix-enhanced degradation of p,p'-DDT during gas chromatographic analysis: A consideration

Analysis of p,p ‘-DDT in environmental samples requires monitoring the GC-derived breakdown of this insecticide, which produces p,p ‘-DDD and/or p,p ‘-DDE, both also primary environmental degradation products. A performance evaluation standard (PES) containing p,p ‘-DDT but not p,p ‘-DDD or p,p ‘-DDE can be injected at regular intervals throughout an analytical sequence to monitor GC degradation. Some U.S. EPA methods limit GC breakdown of DDT in the PES to ≤20%. GC/MS analysis of large-volume natural water samples fortified with deuterium- and 13 C-labeled p,p ‘-DDT exhibited up to 65% DDT breakdown by the GC inlet. These matrix-enhanced GC degradation amounts substantially exceeded the <20% breakdown levels indicated by bracketing injections of the PES containing unlabeled and labeled DDT. Substantial matrix-enhanced GC degradation was not observed during analysis of a limited number of fractionated bed-sediment extracts containing labeled DDT. Use of isotopically labeled DDT seems to provide an effective tool for monitoring sample-specific DDT breakdown during GC/MS analysis. However, analyte co-elutions render impractical their use in GC/ECD analysis. The oc currence of matrix-enhanced GC degradation might have important implications on data quality and the resultant interpretations of the environmental degradation of DDT and other thermolabile contaminants.

Environmental Science & Technology↗

USGS1998

Enhanced dissolution of cinnabar (mercuric sulfide) by dissolved organic matter isolated from the Florida Everglades

Organic matter isolated from the Florida Everglades caused a dramatic increase in mercury release (up to 35 μM total dissolved mercury) from cinnabar (HgS), a solid with limited solubility. Hydrophobic (a mixture of both humic and fulvic) acids dissolved more mercury than hydrophilic acids and other nonacid fractions of dissolved organic matter (DOM). Cinnabar dissolution by isolated organic matter and natural water samples was inhibited by cations such as Ca 2+ . Dissolution was independent of oxygen content in experimental solutions. Dissolution experiments conducted in DI water (pH = 6.0) had no detectable (<2.5 nM) dissolved mercury. The presence of various inorganic (chloride, sulfate, or sulfide) and organic ligands (salicylic acid, acetic acid, EDTA, or cysteine) did not enhance the dissolution of mercury from the mineral. Aromatic carbon content in the isolates (determined by 13 C NMR) correlated positively with enhanced cinnabar dissolution. ζ-potential measurements indicated sorption of negatively charged organic matter to the negatively charged cinnabar (pH pzc = 4.0) at pH 6.0. Possible mechanisms of dissolution include surface complexation of mercury and oxidation of surface sulfur species by the organic matter.

Florida↗