USGS Science⌕ Search

SEARCH · USGS Science

Results for “Geochemical Journal”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 379 records · Page 21Linked to original sources
USGS1997

Evidence for Milankovitch periodicities in Cenomanian-Turonian lithologic and geochemical cycles, western interior U.S.A.

The limestone/marlstone bedding couplets of the Bridge Creek Limestone Member, Cenomanian-Turonian Greenhorn Formation, were analyzed by applying spectral techniques to high-resolution lithologic and geochemical data from a core. The results suggest that the Bridge Creek contains a complex record of orbital cyclicity. The dominant signal appears to be obliquity, but signals corresponding to precession and eccentricity were also observed. The development of the bedding couplets is interpreted to have resulted from a combination of factors, including insolation-controlled changes in higher-latitude precipitation leading to dilution/redox cycles, and in lower-latitude evaporation, leading to changes in surface water conditions and productivity cycles in the calcareous plankton. The data interpreted to reflect redox cycles appear to be more strongly influenced by obliquity, and show a weak precessional signal. In contrast, trends in the carbonate record show the opposite response. The complex bedding pattern observed in the Bridge Creek Limestone is interpreted to result from the competing influences of different orbital cycles expressed through different pathways of the depositional system, and was also affected by changes in sedimentation rates related to relative sea level fluctuations, aperiodic dilution by volcanic ash, and changes in organic-matter production and redox conditions related to a global "oceanic anoxic event". These factors complicate cycle analysis in the lower part of the member but leave a relatively undisturbed record in the upper Bridge Creek Limestone.

Journal of Sedimentary Research↗
USGS1990

The geology of selected peat-forming environments in temperate and tropical latitudes

We studied peat in several geologic and climatic settings: (1) a glaciated terrain in cold-temperate Maine and Minnesota, U.S.A.; (2) an island in a temperate maritime climate in the Atlantic Ocean off the coast of Maine, U.S.A., where sea level is rising rapidly and changing the environment of peat accumulation; (3) swamps along the warm-temperate U.S. Atlantic and Gulf Coastal Plains, where sea level has changed often, thus creating sites for accumulation; and (4) in a tropical climate along the coast of Sarawak, Malaysia, and the delta of the Batang Hari River, Sumatra, Indonesia (Figs. 1 and 2). With the exception of the deposits on the Atlantic and Gulf Coastal Plains, most of the deposits described are domed bogs in which peat accumulation continued above the surface of the surrounding soil. The bogs of the U.S. Atlantic and Gulf Coastal Plains have almost level surfaces. All domed bogs are not entirely ombrotrophic (watered only from precipitation); multidomed bogs that rise from irregular or hilly surfaces may be crossed by streams that supply water to the bogs. The geologic processes or organic sedimentation, namely terrestrialization and paludification, are similar in all peat deposits considered here. Differences in geomorphology affecting the quantity and that quality of peat that has ash contents of less than 25%, which are desirable for commercial purposes, depend chiefly on: (1) high humidity, which is favorable to luxuriant growth of peat-forming vegetation; (2) a depositional setting that permits extensive accumulation relatively free from inorganic contamination from sea water and streams and from dust and volcanic ash; and (3) a stable regional water table that controls the rate of decomposition under aerobic conditions and protects the deposit against the ravages of fire. Differences in peat textures are due to the type of vegetation and to the degree of decomposition. The rate of decomposition is largely the result of the amount of oxidation and aerobic microbial activity. Stratigraphic distribution of various textures and amounts of inorganic components within a peat deposit is largely determined by the vertical positions occupied by peat-forming environments, such as pond, marsh, swamp and heath where vegetation accumulated, and the depth to zones of unoxygenated water. Peat also differs in the rate of accumulation. On the basis of carbon-14 dating, an estimated 8 m of peat in the tropical Batang Hari River deposit in Sumatra has been accumulating at the rate of about 1.5 m/1,000 yr, whereas peat in the cold-temperate deposit in Maine has been accumulating at the rate of 0.66 m/1,000 yr. Accumulation rates in domed deposits such as these are affected not only by factors controlling volume of biomass and aerobic decay but also by stream erosion and fires that remove peat. Such disconformities (see Fig. 2) within the deposit may be recognized by sudden vertical changes in degree of decomposition and/or the presence of charcoal. The trace-element content of peat deposits is affected by the environments of their settings. Samples of peat that have an ash content of less than 25% dry weight and that are from small, almost level swamp deposits along the Atlantic Coastal Plain of North Carolina were compared with similar samples from small domed bogs in Maine, a glaciated area. Samples from Nort Carolina, which are from deposits in thick fluvial and nearshore marine sediments far from the bedrock source, are generally higher in Ti, Cr and Pb. The Maine samples from deposits in glacial drift close to the bedrock source contain more Zn, Mn, P, Ca, Na and Fe. The kind and amount of trace elements within the deposits appear to relate largely to depositional setting, to kinds of bedrock source, and to the modes of transportation from source to peat swamp. Trace-element concentrations in the extensive Sumatra peat deposit, which represents a potentially commercial coal bed, are similar to those found in Appalachian coals except for As and Au, which are higher in the former. This similarity most likely implies that geochemical controls on mineral matter controlled the concentrations in both. Most peat deposits found in the world today are not precursors of economic coal beds because they are too local in extent, lack beds of commercial-quality peat greater than 6 m thick, and/or are too far from sea level to be rapidly by marine or marginal marine sediments before destruction by erosion and decomposition. However, the two domed deposits in Sarawak and Sumatra described above are parts of extensive, thick, low-sulfur, fuel-quality peat deposits, which have bases below the levels of rivers on coastal deltas. These are likely to be preserved in their lower part and to become precursors of tropical coal seams of potential economic importance. The lenticular and tabular peat deposits of the Atlantic and Gulf Coastal Plains, which have little chance of survival, have features resembling those in Tertiary peat deposits in alluvial settings of western North America. The quality, shape, and extent of modern and ancient peat deposits are controlled by the same factors - humidity, vegetation type, ground- and surface-water regimes, and physiographic and geologic setting. Thus, a study of modern peat deposits may help in studies of the areal distribution and the thickness and quality of ancient coal beds.

International Journal of Coal Geology↗
USGS2020

Effects of montane watershed development on vulnerability of domestic groundwater supply during drought

Climate change is expected to reduce recharge to montane aquifers in the western United States, but it is unclear how this will impact groundwater resources in watersheds where intensive surface-water development has disrupted the natural hydrologic regime. To better understand sources of recharge and associated vulnerabilities of groundwater supply in this setting, we made a detailed geochemical survey of domestic wells finished in fractured bedrock throughout the Yuba and Bear River watersheds (Sierra Nevada foothills, northern California)during historic drought (2015–2016). Stable isotopes of water and noble gas recharge temperatures closely tracked atmospheric lapse rates across a broad elevation gradient (100–2000 m), indicating groundwater inputs are dominated by local precipitation that rapidly recharges fractured bedrock during the winter wet-season. However, nearly one-quarter of wells had water isotopes that were fractionated by evaporation and warm recharge temperatures, indicative of mixing with dry-season recharge by surface water. Monte Carlo mixing models suggest evaporation-impacted groundwater samples are mixtures of local rain with an average of 28% ± 13% from diverted surface water that can recharge bedrock aquifers during the dry-season by either irrigation return flow or seepage from extensive distribution infrastructure. Wells that received recharge subsidies from diverted surface water had elevated levels of nitrate and coliform bacteria compared to those replenished exclusively by local precipitation, which are more vulnerable to supply shortage during drought. It is important to consider the impacts of increased surface-water development on the quantity and quality of groundwater recharge in rapidly developing montane watersheds.

California↗
USGS2009

Arc-continent collision and the formation of continental crust: A new geochemical and isotopic record from the Ordovician Tyrone Igneous Complex, Ireland

Collisions between oceanic island-arc terranes and passive continental margins are thought to have been important in the formation of continental crust throughout much of Earth's history. Magmatic evolution during this stage of the plate-tectonic cycle is evident in several areas of the Ordovician Grampian-Taconic orogen, as we demonstrate in the first detailed geochemical study of the Tyrone Igneous Complex, Ireland. New U-Pb zircon dating yields ages of 493 2 Ma from a primitive mafic intrusion, indicating intra-oceanic subduction in Tremadoc time, and 475 10 Ma from a light rare earth element (LREE)-enriched tonalite intrusion that incorporated Laurentian continental material by early Arenig time (Early Ordovician, Stage 2) during arc-continent collision. Notably, LREE enrichment in volcanism and silicic intrusions of the Tyrone Igneous Complex exceeds that of average Dalradian (Laurentian) continental material that would have been thrust under the colliding forearc and potentially recycled into arc magmatism. This implies that crystal fractionation, in addition to magmatic mixing and assimilation, was important to the formation of new crust in the Grampian-Taconic orogeny. Because similar super-enrichment of orogenic melts occurred elsewhere in the Caledonides in the British Isles and Newfoundland, the addition of new, highly enriched melt to this accreted arc terrane was apparently widespread spatially and temporally. Such super-enrichment of magmatism, especially if accompanied by loss of corresponding lower crustal residues, supports the theory that arc-continent collision plays an important role in altering bulk crustal composition toward typical values for ancient continental crust. ?? 2009 Geological Society of London.

Journal of the Geological Society↗
USGS2001

Progression of natural attenuation processes at a crude-oil spill site . I. Geochemical evolution of the plume

A 16-year study of a hydrocarbon plume shows that the extent of contaminant migration and compound-specific behavior have changed as redox reactions, most notably iron reduction, have progressed over time. Concentration changes at a small scale, determined from analysis of pore-water samples drained from aquifer cores, are compared with concentration changes at the plume scale, determined from analysis of water samples from an observation well network. The small-scale data show clearly that the hydrocarbon plume is growing slowly as sediment iron oxides are depleted. Contaminants, such as ortho -xylene that appeared not to be moving downgradient from the oil on the basis of observation well data, are migrating in thin layers as the aquifer evolves to methanogenic conditions. However, the plume-scale observation well data show that the downgradient extent of the Fe 2+ and BTEX plume did not change between 1992 and 1995. Instead, depletion of the unstable Fe (III) oxides near the subsurface crude-oil source has caused the maximum dissolved iron concentration zone within the plume to spread at a rate of approximately 3 m/year. The zone of maximum concentrations of benzene, toluene, ethylbenzene and xylene (BTEX) has also spread within the anoxic plume. In monitoring the remediation of hydrocarbon-contaminated ground water by natural attenuation, subtle concentration changes in observation well data from the anoxic zone may be diagnostic of depletion of the intrinsic electron-accepting capacity of the aquifer. Recognition of these subtle patterns may allow early prediction of growth of the hydrocarbon plume.

Journal of Contaminant Hydrology↗
USGS2023

Permafrost microbial communities and functional genes are structured by latitudinal and soil geochemical gradients

Permafrost underlies approximately one quarter of Northern Hemisphere terrestrial surfaces and contains 25–50% of the global soil carbon (C) pool. Permafrost soils and the C stocks within are vulnerable to ongoing and future projected climate warming. The biogeography of microbial communities inhabiting permafrost has not been examined beyond a small number of sites focused on local-scale variation. Permafrost is different from other soils. Perennially frozen conditions in permafrost dictate that microbial communities do not turn over quickly, thus possibly providing strong linkages to past environments. Thus, the factors structuring the composition and function of microbial communities may differ from patterns observed in other terrestrial environments. Here, we analyzed 133 permafrost metagenomes from North America, Europe, and Asia. Permafrost biodiversity and taxonomic distribution varied in relation to pH, latitude and soil depth. The distribution of genes differed by latitude, soil depth, age, and pH. Genes that were the most highly variable across all sites were associated with energy metabolism and C-assimilation. Specifically, methanogenesis, fermentation, nitrate reduction, and replenishment of citric acid cycle intermediates. This suggests that adaptations to energy acquisition and substrate availability are among some of the strongest selective pressures shaping permafrost microbial communities. The spatial variation in metabolic potential has primed communities for specific biogeochemical processes as soils thaw due to climate change, which could cause regional- to global- scale variation in C and nitrogen processing and greenhouse gas emissions.

The ISME Journal↗
USGS2014

A bootstrap estimation scheme for chemical compositional data with nondetects

The bootstrap method is commonly used to estimate the distribution of estimators and their associated uncertainty when explicit analytic expressions are not available or are difficult to obtain. It has been widely applied in environmental and geochemical studies, where the data generated often represent parts of whole, typically chemical concentrations. This kind of constrained data is generically called compositional data, and they require specialised statistical methods to properly account for their particular covariance structure. On the other hand, it is not unusual in practice that those data contain labels denoting nondetects, that is, concentrations falling below detection limits. Nondetects impede the implementation of the bootstrap and represent an additional source of uncertainty that must be taken into account. In this work, a bootstrap scheme is devised that handles nondetects by adding an imputation step within the resampling process and conveniently propagates their associated uncertainly. In doing so, it considers the constrained relationships between chemical concentrations originated from their compositional nature. Bootstrap estimates using a range of imputation methods, including new stochastic proposals, are compared across scenarios of increasing difficulty. They are formulated to meet compositional principles following the log-ratio approach, and an adjustment is introduced in the multivariate case to deal with nonclosed samples. Results suggest that nondetect bootstrap based on model-based imputation is generally preferable. A robust approach based on isometric log-ratio transformations appears to be particularly suited in this context. Computer routines in the R statistical programming language are provided.

Journal of Chemometrics↗
USGS2010

Coalbed methane resources of the Appalachian Basin, eastern USA

In 2002, the U.S. Geological Survey (USGS) assessed the technically recoverable, undiscovered coalbed-gas resources in the Appalachian basin and Black Warrior basin Assessment Provinces as about 15.5 trillion cubic feet. Although these resources are almost equally divided between the two areas, most of the production occurs within relatively small areas within these Provinces, where local geological and geochemical attributes have resulted in the generation and retention of large amounts of methane within the coal beds and have enhanced the producibility of the gas from the coal. In the Appalachian basin, coalbed methane (CBM) tests are commonly commercial where the cumulative coal thickness completed in wells is greater than three meters (10 ft), the depth of burial of the coal beds is greater than 100 m (350 ft), and the coal is in the thermogenic gas window. In addition to the ubiquitous cleating within the coal beds, commercial production may be enhanced by secondary fracture porosity related to supplemental fracture systems within the coal beds. In order to release the methane from microporus coal matrix, most wells are dewatered prior to commercial production of gas. Two Total Petroleum Systems (TPS) were defined by the USGS during the assessment: the Pottsville Coal-bed gas TPS in Alabama, and the Carboniferous Coal-bed Gas TPS in Pennsylvania, Ohio, West Virginia, eastern Kentucky, Virginia, Tennessee, and Alabama. These were divided into seven assessment units, of which three had sufficient data to be assessed. Production rates are higher in most horizontal wells drilled into relatively thick coal beds, than in vertical wells; recovery per unit area is greater, and potential adverse environmental impact is decreased.

Alabama, Georgia, Kentucky, Maryland, North Caroli↗
USGS2017

Element partitioning in magnetite under low-grade metamorphic conditions – A case study from the Proterozoic Belt Supergroup, USA

The distribution and partitioning of elements in igneous rocks is well established for various melt –(fluid) –solid pairs and provides important insights into the petrogenesis of these rocks. Studies of the partitioning behavior of elements under metamorphic conditions are scarce and commonly focus on high-grade metamorphic facies. Little is known about the partitioning behavior of elements under low-grade metamorphic conditions. Greenschist-facies metasedimentary rocks of the North American Belt Supergroup host magnetite that displays equilibrium features with co-existing mineral phases such as quartz and carbonate. Magnetite is an ideal target for geochemical investigations because it can incorporate a large number of cations and is sensitive to changes in temperature, oxygen fugacity, pressure, whole-rock composition, and cooling trends. Whole-rock major and trace element analyses have been undertaken on representative samples from Belt Supergroup metasedimentary rocks using X-ray luorescence. Electron microprobe and laser ablation ICP-MS were used to obtain major and trace element concentrations for magnetite hosted in these rocks. Stable-isotope geothermometry of magnetite–quartz and magnetite–carbonate pairs constrain metamorphic temperatures to ca. 390°C. Partition coefficients (D) for magnetite–matrix pairs presumably reflect equilibrium at these low-grade metamorphic conditions. Except for Mn and Ni, which show comparable partition coefficients, the calculated values are one to two orders of magnitude lower than those for igneous magnetite. Aluminum displays the lowest calculated partition coefficient with a value of 0.006 and Ni and Fe the highest values with 6.3 and 20.9, respectively. Of the elements that commonly occur in spinel-group minerals, two groups can be distinguished: (1) elements that preferentially partition into the host rock (D<1): Al, Mg, Pb, and Ti and (2) elements that show a preference to partition into magnetite (D>1): Zn, Mn, Cr, V, Ni, and Fe.

European Journal of Mineralogy↗
USGS2018

Multi-year high-frequency hydrothermal monitoring of selected high-threat Cascade Range volcanoes

From 2009 to 2015 the U.S. Geological Survey (USGS) systematically monitored hydrothermal behavior at selected Cascade Range volcanoes in order to define baseline hydrothermal and geochemical conditions. Gas and water data were collected regularly at 25 sites on 10 of the highest-risk volcanoes in the Cascade Range. These sites include near-summit fumarole groups and springs/streams that show clear evidence of magmatic influence (high 3 He/ 4 He ratios and/or large fluxes of magmatic CO 2 or heat). Site records consist mainly of hourly temperature and hydrothermal-flux data. Having established baseline conditions during a multiyear quiescent period, the USGS reduced monitoring frequency from 2015 to present. The archived monitoring data are housed at (doi:10.5066/F72N5088). These data (1) are suitable for retrospective comparison with other continuous geophysical monitoring data and (2) will provide context during future episodes of volcanic unrest, such that unrest-related variations at these thoroughly characterized sites will be more clearly recognizable. Relatively high-frequency year-round data are essential to achieve these objectives, because many of the time series reveal significant diurnal, seasonal, and inter-annual variability that would tend to mask unrest signals in the absence of baseline data. Here we characterize normal variability for each site, suggest strategies to detect future volcanic unrest, and explore deviations from background associated with recent unrest.

California, Oregon, Washington↗
USGS2018

Pore-types and pore-network evolution in Upper Devonian-Lower Mississippian Woodford and Mississippian Barnett mudstones: Insights from laboratory thermal maturation and organic petrology

Pore-evolution models from immature organic-matter (OM) -rich Barnett (0.42%R o ) and Woodford (0.49%R o ) mudstones were compared with models previously developed from low-maturity OM-lean Boquillas (Eagle Ford-equivalent) mudstones to investigate whether (1) different mineralogy (siliceous vs. calcareous) exerts different catalytic and sorption effects and influences OM-pore origin and evolution; and (2) different types of macerals show different OM pore evolution history. Laboratory gold-tube pyrolysis, scanning electron microscopy (SEM) and thin-section petrography, organic petrography, and geochemical characterization were used to investigate the role of bulk mineralogy, maceral type, and thermal maturation on OM-pore evolution. Results suggest that mineralogy has little impact on OM-pore development and evolution. Macerals, identified using both SEM (platy OM, particulate OM, organic–mineral admixtures, Tasmanites ) and organic petrology (vitrinite, inertinite, amorphous organic matter [AOM]/bituminite, telalginite [ Leiosphaeridia , Tasmanites ]), do affect the origin and evolution of OM pores owing to differences in chemical compositions, generation kinetics, and activation-energy distributions between Tasmanites , matrix bituminite, and other types of macerals. Leiosphaeridia and Tasmanites in Woodford mudstone samples exhibit a delay in onset and a shorter period of petroleum generation and pore development compared to the matrix bituminite in the Barnett and Woodford mudstone samples. Pre-oil solid bitumen was observed to have migrated into initial primary mineral pore networks at the bitumen generation stage in both Barnett and Woodford samples. At higher levels of thermal maturation, the volume of primary mineral pores decreases and the pore volume composed of modified mineral pores and OM pores becomes greater. Pore evolution and pore-type heterogeneity in these mudstones is a function of the initial mineral pore network, types of kerogen and macerals, and generation kinetics of individual macerals upon thermal maturation.

Oklahoma↗
USGS2006

Mixing of shallow and deep groundwater as indicated by the chemistry and age of karstic springs

Large karstic springs in east-central Florida, USA were studied using multi-tracer and geochemical modeling techniques to better understand groundwater flow paths and mixing of shallow and deep groundwater. Spring water types included Ca-HCO3 (six), Na-Cl (four), and mixed (one). The evolution of water chemistry for Ca-HCO3 spring waters was modeled by reactions of rainwater with soil organic matter, calcite, and dolomite under oxic conditions. The Na-Cl and mixed-type springs were modeled by reactions of either rainwater or Upper Floridan aquifer water with soil organic matter, calcite, and dolomite under oxic conditions and mixed with varying proportions of saline Lower Floridan aquifer water, which represented 4-53% of the total spring discharge. Multiple-tracer data-chlorofluorocarbon CFC-113, tritium (3H), helium-3 (3Hetrit), sulfur hexafluoride (SF6) - for four Ca-HCO3 spring waters were consistent with binary mixing curves representing water recharged during 1980 or 1990 mixing with an older (recharged before 1940) tracer-free component. Young-water mixing fractions ranged from 0.3 to 0.7. Tracer concentration data for two Na-Cl spring waters appear to be consistent with binary mixtures of 1990 water with older water recharged in 1965 or 1975. Nitrate-N concentrations are inversely related to apparent ages of spring waters, which indicated that elevated nitrate-N concentrations were likely contributed from recent recharge. ?? Springer-Verlag 2006.

Hydrogeology Journal↗
USGS2000

Geochemical evidence for a magmatic CO 2 degassing event at Mammoth Mountain, California, September-December 1997

Recent time series soil CO 2 concentration data from monitoring stations in the vicinity of Mammoth Mountain, California, reveal strong evidence for a magmatic degassing event during the fall of 1997 lasting more than 2 months. Two sensors at Horseshoe Lake first recorded the episode on September 23, 1997, followed 10 days later by a sensor on the north flank of Mammoth Mountain. Direct degassing from shallow intruding magma seems an implausible cause of the degassing event, since the gas released at Horseshoe Lake continued to be cold and barren of other magmatic gases, except for He. We suggest that an increase in compressional strain on the area south of Mammoth Mountain driven by movement of major fault blocks in Long Valley caldera may have triggered an episode of increased degassing by squeezing additional accumulated CO 2 from a shallow gas reservoir to the surface along faults and other structures where it could be detected by the CO 2 monitoring network. Recharge of the gas reservoir by CO 2 emanating from the deep intrusions that probably triggered deep long-period earthquakes may also have contributed to the degassing event. The nature of CO 2 discharge at the soil-air interface is influenced by the porous character of High Sierra soils and by meteorological processes. Solar insolation is the primary source of energy for the Earth atmosphere and plays a significant role in most diurnal processes at the Earth surface. Data from this study suggest that external forcing due largely to local orographic winds influences the fine structure of the recorded CO 2 signals.

California↗
USGS1988

Pyrite formation in the Lower Cretaceous Mowry Shale: Effect of organic matter type and reactive iron content

Geochemical analysis of the Lower Cretaceous Mowry Shale in Wyoming and Montana shows that organic matter type and reactive iron content limited pyrite formation during early diagenesis. Consequently, direct interpretation of paleosalinity cannot be made from a carbon/sulfur plot. Mowry Shale samples with hydrogen index (HI) less than 150 (mg hydrocarbon/ organic carbon) contain low amounts of sulfur. In these samples, bacterial reduction of sulfate may have been inhabited by low nutritive content of the organic matter. For Mowry samples with HI greater than 150 there is a range of sulfur values and a positive correlation between iron and sulfur. The iron sulfur regression is approximately parallel to the stoichiometric pyrite line and intersects the iron axis at 0.5 percent. On average, 60 percent of the iron present was nonreactive; the remaining iron reacted with sulfide to form pyrite. For samples with HI greater than 150, pyrite formation was limited by sulfide or organic carbon content but by reactive iron content. In one modern setting, where salinity is greater than one-half normal seawater, sulfate content does not limit pyrite formation (Berner and Raiswell, 1984). From this analysis then, it can be estimated that the Mowry Sea was not a fresh water body but was either of normal marine salinity or contained brackish water with greater than one-half normal salinity.

Wyoming↗
USGS1979

Hydraulic potential in Lake Michigan bottom sediments

The magnitude and direction of groundwater flux in the bottom sediments of Lake Michigan were deduced from measurements made during three shipboard cruises between 1973 and 1975. These factors affect the geochemical environment of the sediments and therefore the distribution of trace elements reported to be present. The near-shore, sandy-bottom and fine-grained, soft, deep-lake sediments were investigated; areas of hard till or bedrock were not included in the study. Thirty-three piezometers were placed in near-shore sands in waters 5-15 m deep. The piezometers were placed an average of 3 m into the bottom sediment. Water levels from the piezometers averaged 0.6 cm above the lake level, equivalent to an upward hydraulic gradient of about 0.002 cm/cm. Water samples taken from the piezometers have a distinctly different chemical composition from that of the lake water. The total dissolved mineral content and hardness of the groundwater are about twice those of the lake water. Twenty-two hydraulic gradient measurements were made in the fine-grained soft deep-lake sediments in waters 48-140 m deep by using a differential-pressure transducer dropped into the sediments. These measurements show an upward gradient averaging 0.2 cm/cm. No chemical data were obtained for the groundwater in the deep-lake sediments. The results of this study indicate that the groundwater flux is upward through the bottom sediments into Lake Michigan and that there is a chemical change in the water near the water-sediment contact.

Lake Michigan↗
USGS2004

Gas evolution in eruptive conduits: Combining insights from high temperature and pressure decompression experiments with steady-state flow modeling

In this paper we examine the consequences of bubble nucleation mechanism on eruptive degassing of rhyolite magma. We use the results of published high temperature and pressure decompression experiments as input to a modified version of CONFLOW, the numerical model of Mastin and Ghiorso [(2000) U.S.G.S. Open-File Rep. 00-209, 53 pp.] and Mastin [(2002) Geochem. Geophys. Geosyst. 3, 10.1029/2001GC000192] for steady, two-phase flow in vertical conduits. Synthesis of the available experimental data shows that heterogeneous nucleation is triggered at ΔP <5–20 MPa in water-saturated rhyolite and leads to equilibrium degassing through a discrete nucleation event. Typically 10 5 –10 7 bubbles/cm 3 are produced which evolve Gaussian bubble size distributions. Homogeneous nucleation requires ΔP >120–150 MPa, and leads to disequilibrium degassing at extreme H 2 O supersaturation. In this latter case, nucleation is an ongoing process controlled by changing supersaturation conditions. Exponential bubble size distributions are often produced with number densities of 10 6 –10 9 bubbles/cm 3 . Our numerical analysis adopts an end-member approach that specifically compares equilibrium degassing with delayed, disequilibrium degassing characteristic of homogeneously-nucleating systems. The disequilibrium simulations show that delaying nucleation until ΔP =150 MPa restricts degassing to within ∼1500 m of the surface. Fragmentation occurs at similar porosity in both the disequilibrium and equilibrium modes (∼80 vol%), but at the distinct depths of ∼500 m and ∼2300 m, respectively. The vesiculation delay leads to higher pressures at equivalent depths in the conduit, and the mass flux and exit pressure are each higher by a factor of ∼2.0. Residual water contents in the melt reaching the vent are between 0.5 and 1.0 wt%, roughly twice that of the equilibrium model.

Journal of Volcanology and Geothermal Research↗
USGS2019

A 50-year Sr/Ca time series from an enclosed, shallow-water Guam coral: In situ monitoring and extraction of a temperature trend, annual cycle, and ENSO and PDO signals

Located on the northern edge of the West Pacific Warm Pool and having a developed economy and modern infrastructure, Guam is well positioned and equipped for obtaining natural records of the west Pacific maritime paleoclimate. This study was a proof of concept to explore whether useful climate proxy records might be obtained from coral at readily accessible, even if geochemically nonoptimal, coastal sites. A 50-year Sr/Ca record (1960–2010) was thus obtained from a shallow-water, near-shore Porites lutea colony at a recreational facility inside Guam's Apra Harbor and compared with local and regional meteorological records, including the El Niño–Southern Oscillation (ENSO) and Pacific Decadal Oscillation (PDO) indices. The accessibility of the site enabled documentation of relevant environmental variables for 16 months (September 2009–December 2010): seawater δ 18 O, pH, seawater cations, and nitrate. Time series of seawater δ 18 O, pH, and cations show evidence of freshwater input from direct rainfall and stream discharge into the harbor. An anomalously higher mean and variable concentrations of Ba suggest the presence of river-borne, fine-grained terrigenous sediment. Nevertheless, the Sr/Ca time series reproduces a long-term warming trend seen in historical records of local air temperature and regional sea-surface temperature (SST) and closely tracks the ENSO and PDO indices over the entire 50-year record. The consistency of the results with Guam's historical instrumental records, previous coral δ 18 O results from Guam obtained by others, and previous Sr/Ca proxy results for SST in similar environments elsewhere demonstrate that accessible near-shore sites—where environmental conditions can be monitored—can produce useful Sr/Ca records of local and regional climate phenomena.

Journal of Coastal Research↗
USGS2024

Indications of preferential groundwater seepage feeding northern peatland pools

Groundwater seepage from underlying permeable glacial sedimentary structures, such as eskers, has been hypothesized to directly feed pools in northern peat bogs. These hypotheses directly contradict classical peat bog models for ombrogenous systems, wherein meteoric water is the sole water input to these systems. Variations in the underlying mineral sediment in contact with the peat imply that unrecognized hydrogeologic connectivity may exist with pools in northern peat bogs, particularly where high permeability materials are in contact with the peat. Seepage dynamics originating from these structural variations were investigated using a suite of thermal and hydrogeophysical methods deployed around pools in a peat bog of northeastern Maine, USA. Thermal characterization methods mapped anomalies that were confirmed as matrix seepage or preferential flow pathways (PFPs). Geochemical methods were employed at identified thermal anomalies to confirm upwelling of solute-rich groundwater. Conduits around pools were associated with surficial terminations of suspected peat pipes, based on the inference of pathways extending down into the peat, that focus flow through PFPs in the peat matrix. Discharge also occurred through the peat matrix adjacent to suspected pipe structures and matrix seepage rates were quantified using analysis of diurnal temperature signals recorded at multiple depths. Seepage rates, with a maximum of nearly 0.4 m/d, were measured at localized points around pools. Periods of synchronized temperatures paired with highly muted diurnal temperature signals, recorded in diurnal temperature with depth data, were interpreted qualitatively as activation of strong upward discharge rates through suspected peat pipes. These time periods correlated strongly with local precipitation events around the peatland. Ground-penetrating radar surveys revealed discontinuities in the low permeability glacio-marine clay at the mineral sediment-peat interface, interpreted to be regional glacial esker deposits, which were located beneath and around pools. Heat tracing, specific conductance contrasts, seepage rates, and trace metal concentrations all imply groundwater seepage originating from underlying permeable glacial esker deposits and directly sourcing pools. Preferential groundwater inputs into northern peat bogs may play a key role in developing and maintaining pool systems, with enhanced solute transport impacting peatland ecology, water resources, and carbon cycling.

Maine↗