USGS Science⌕ Search

SEARCH · USGS Science

Results for “Soil Dynamics and Earthquake Engineering”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

1,696 records · Page 20Linked to original sources
USGS2025

Magnitude, depth and methodological variations of spectral stress drop within the SCEC/USGS Community Stress Drop Validation Study using the 2019 Ridgecrest Earthquake Sequence

We present the first ensemble analysis of the 56 different sets of results submitted to the ongoing Community Stress Drop Validation Study using the 2019 Ridgecrest, California, earthquake sequence. Different assumptions and methods result in different estimation of the source contribution to recorded seismograms, and hence to the source parameters (principally corner frequency, f c ⁠ , spectral stress drop, Δσ, and seismic moment, M 0 ⁠ ) obtained from modeling calculated source spectra. For earthquakes smaller than magnitude (M) 2.5 there is negligible correlation between the f c values obtained by different studies, implying that no present method is reliable using available data. For larger magnitude events, correlation between f c measurements of different studies, within even a small M range is always higher than spectral ⁠Δσ , because the f c measurements simply reflect the underlying physical decrease in f c with increasing M. We model the observed trends of submitted f c with both magnitude and depth. Most methods report an increase in spectral Δσ with M, although a magnitude‐invariant spectral Δσ is within the confidence limits. The depth dependence is smaller and depends on whether a study allows attenuation to vary with source depth; a combination of depth‐dependent attenuation correction, and depth‐dependent shear‐wave velocity can compensate for reported depth trends. We model the submitted values to remove differing M and depth variation to investigate the relative interevent variability. We find consistent relative variation between individual events, and also lower relative spectral Δσ in the northwest of the aftershock sequence, and higher on the cross fault and in the region of main fault intersection. This large‐scale comparison implies that absolute spectral Δσ estimates are dependent on the methods used; studies of different regions or using different methods should not be directly compared and improved constraints on path and site corrections are needed to resolve these absolute spectral Δσ differences.

California↗
USGS2026

Earthquake rupture arrest from depth‐dependent frictional stability on the Pütürge segment of the East Anatolian Fault Zone, Türkiye (Turkey)

Determining why earthquake ruptures stop is a central challenge in earthquake science and seismic hazard assessment. The Pütürge segment of the East Anatolian Fault Zone, Türkiye, exhibits shallow creep (<∼3 km depth) yet hosts M > 6.5 earthquake ruptures at greater depth. Here, we evaluate whether variations in frictional stability along this segment aided arrest of the 2020 M 6.7 Elaziğ and 2023 M 7.8 Pazarcık earthquake ruptures. Analysis of Sentinel‐1 Synthetic Aperture Radar imagery indicates the 2023 M 7.8 rupture propagated laterally into a metamorphic massif within the Pütürge segment, where slip rapidly decayed below detection limits. Creepmeters along this segment recorded no significant surface afterslip (<3 mm) in the following year. To investigate this fault‐slip behavior, we conducted triaxial friction experiments on Pütürge fault gouge sampled from an outcrop exposure. The gouge, composed primarily of muscovite, quartz, and calcite, is velocity strengthening at conditions approximating 0–2.5 km depth and velocity weakening at 4–5 km depth. This transition to velocity‐weakening friction is associated with enhanced comminution and shear localization observed microstructurally. Our results suggest that depth‐dependent frictional stability of the Pütürge fault segment facilitates rupture nucleation and propagation at depth while maintaining rupture‐arresting behavior near Earth’s surface.

Pütürge segment of the East Anatolian Fault Zone↗
USGS2025

Reply to, “Comment on ‘The 1886 Charleston, South Carolina, earthquake: Relic railroad offset reveals rupture,’ by Roger Bilham and Susan E. Hough”

We welcome this opportunity to respond to Pratt et al. (2024) (hereinafter P24). Bilham and Hough (2023) proposed a “first-cut” elastic deformation model for the 1886 earthquake, a quantitative source model constrained by identified coseismic constraints. A key observation was the measurement of a lateral offset of a railroad line south of Summerville, leading to a model with predominately dextral slip and minor convergence, from which we concluded that active faulting had raised the Penholoway Marine Terrace >6 m since ∼770 ka. P24 questioned these constraints and proposed an alternative rupture model with predominantly reverse slip. This alternative model is neither consistent with coseismic constraints nor with other geophysical data. In a revised model presented here, we recognize that uplift of the Penholoway Terrace is confined to the eastern edge of the terrace, which we conclude results from active folding and tectonic transpression centered on the dextral fault that offset the railroad in 1886.

South Carolina↗
USGS2024

Status and performance of the ShakeAlert® earthquake early warning system: 2019-2023

The U.S. Geological Survey (USGS)‐operated ShakeAlert® system is the United States West Coast earthquake early warning system ( Given et al. , 2018 ). In this study we detail ShakeAlert’s performance during some of the largest events seen by the system thus far. Statewide public alerting using ShakeAlert messages was authorized in California in October 2019. Over the next few years, public alerts were expanded into Oregon and then into Washington ( U.S. Geological Survey, 2024 ). ShakeAlert source results are routinely compared to the USGS Comprehensive Catalog (ComCat; Guy et al. , 2015 ; U.S. Geological Survey, Earthquake Hazards Program, 2017 ), which contains the earthquake location and magnitude determined using complete waveform data. M 4.5 and larger is the threshold used for public alerting and was deliberately set below the level where damage is likely to compensate for cases where the system underestimates the magnitude. Between 17 October 2019 and 1 September 2023, the ShakeAlert system created 95 events with maximum magnitude estimates of M ≥4.5, the public alerting threshold. 94 of the 95 events were due to real earthquakes. Seven were categorized “false” per ShakeAlert’s internal definition that there was no matching catalog event within 100 km and 30 s of origin time; however, all but one of these were real earthquakes that were poorly located, primarily because they were at the edges of the seismic network. Three detected events were labeled “missed” because they were very poorly located (>100 km location error). In addition, the system did not produce solutions for four ComCat events M ≥4.5 ( U.S. Geological Survey, Earthquake Hazards Program, 2017 ), which were all at the edge of the alerting and network boundaries. The ShakeAlert system has accurately detected the majority of earthquakes that have occurred within the operational region since completing the public rollout, and alerts from the system have been delivered to millions of cell phone users throughout the West Coast.

California, Oregon, Washington↗
USGS2024

The importance of nodal plane orientation diversity for earthquake focal mechanism stress inversions

Inversions of earthquake focal mechanisms are among the most accessible and reliable methods for determining crustal stress. However, the use of this method varies widely, and assumptions that underpin it are often violated, potentially compromising stress estimates. We investigate the consequences of violating the little-studied assumption that the focal mechanisms have diverse orientations. Our approach is to employ data-informed synthetic mechanisms, with nodal plane orientations defined by recent earthquake lineaments in the Midland Basin, western Texas, and rakes consistent with slip in the mapped stress field. Using both the traditional stress inversion method that assumes constant shear stress magnitudes on the causative faults as well as a recently published variable shear stress method, we show that low fault plane diversity can cause maximum horizontal stress ( S Hmax ) orientation and relative principal stress magnitude (faulting regime) estimates to differ markedly from the true values. This problem is compounded for catalogs with even modest amounts of noise (≤15°) or few (e.g., 20) mechanisms. Significantly, traditional approaches for quantifying uncertainty such as the bootstrap can severely underestimate the true uncertainty under these circumstances. To remedy this, we provide simple tools to quantify nodal plane orientation diversity and stress inversion reliability.

Geological Society of London Special Publications↗
USGS2025

Using gridded seismicity to forecast the long-term spatial distribution of earthquakes for the 2025 Puerto Rico and U.S. Virgin Islands National Seismic Hazard Model

Gridded (or background) seismicity models are a critical component of probabilistic seismic hazard assessments, accounting for off‐fault and smaller‐magnitude earthquakes. They are typically developed by declustering and spatially smoothing an earthquake catalog to estimate a long‐term seismicity rate that can be used to forecast future earthquakes. Here, we present new gridded seismicity models for use in the 2025 National Seismic Hazard Model (NSHM) for Puerto Rico and the U.S. Virgin Islands (PRVI). The previous PRVI NSHM was released in 2003, and our new models incorporate updates to both data and methodology. We utilize an updated earthquake catalog based on improved Puerto Rico Seismic Network data with newly characterized completeness epochs. The catalog is divided into crustal, subduction interface, and intraslab seismicity using new methods and Slab2 subduction zone geometries. To forecast the long‐term spatial distribution of earthquakes, we use an updated methodology developed for the 2023 U.S. 50‐state NSHM, considering three declustering methods and two spatial smoothing methods based on 2D Gaussian kernels. To adapt it for the complex seismotectonics of the region, we also adopt probabilistic methods to account for events with unknown depths and uncertainties in tectonic classification, and develop a new method for spatial scaling to counteract the effects of spatial variability in network coverage while maintaining the use of smaller events. Finally, we test the performance of these spatial models in forecasting the location of M w ≥ 5earthquakes in the region. Our updated methodology improves the representation of epistemic uncertainty relative to the 2003 model, and our results demonstrate the effectiveness of the new measures we have introduced to address heterogeneities in network detection and systematically evaluate forecast performance.

Puerto Rico, U.S. Virgin Islands↗
USGS2024

A seismic nodal deployment to understand magmatic structure in the vicinity of the Pahala earthquake swarm

In summer-fall 2022, 80 three-component SmartSolo IGU-BD3C-5 nodal seismometers were deployed surrounding the Pāhala seismic swarm on the Island of Hawaiʻi, with the goal of improving seismicity catalogs, and seismic velocity images of the crust and upper mantle in this region. The Pāhala swarm, located south of Mauna Loa and Kīlauea, has been the site of a multiyear sustained swarm of seismicity at depths of ~ 25 – 40 km, with order of magnitude increases in rate in 2015, and then again in 2019. This seismicity is possibly related to the input of magma from the mantle plume below, which may then be subsequently transported to volcanic edifices. However, these processes remain enigmatic, in part due to a lack of precise earthquake locations and seismic velocity models in this region. Here we provide an overview of the deployment, an assessment of the quality of the collected data, and discuss the viability of the dataset for local earthquake relocation, tomography, and teleseismic receiver functions. Through comparisons with proximal permanent broadband and short period instruments, we find that the nodes produce high quality data, particularly at periods shorter than 5 s, although we find, document, and correct discrepancies with the gain and polarities of the instruments. We successfully record signals from teleseismic earthquakes, even at periods longer than 5 s (the corner of the flat response of the nodes). We also record local earthquakes, including details related to source characteristics. This indicates that the data is likely to prove useful for investigations using both local and teleseismic earthquake signals to better understand the connections between the deep and shallow magmatic systems of Hawaiʻi. While this deployment provides a snapshot in time, its success may provide a useful benchmark for future studies as the volcanic systems of Hawaiʻi continue to evolve in the future.

Hawaii↗
USGS2025

SURF: An automated method for building nonplanar 3D fault models from earthquake hypocenters

Accurately characterizing 3D fault geometry is vital for improving our understanding of earthquake behavior and informing the development of seismic hazard models. Despite their importance, subsurface fault structures tend to be poorly constrained because of limitations in observational data. Improvements to the seismic networks and earthquake detection algorithms have increased the precision and volume of earthquake catalogs, which help illuminate detailed subsurface fault structure and provide the most direct information available about fault geometries at depth. We present a Python package to automate generating 3D fault geometries directly from hypocentral seismicity patterns. This method begins with clustering events based on their spatial density, identifying coherent patterns. Nearby clusters are then merged based on the similarity of their orientations. We fit nonplanar surfaces using support vector regression to balance surface accuracy with minimal deviations from planarity. The fault models are output as quadrilateral meshes at user‐defined resolution. In the process of generating the 3D fault surfaces, we compute the spatial density of seismicity around the surface and the planarity as quantitative metrics of the model outputs. As a proof of concept, we apply this approach to the San Andreas–Calaveras fault junction region and the 2019 Ridgecrest earthquake sequence, both in California, which contain complex subparallel faults well defined at the Earth’s surface and abundant microseismicity. These case studies demonstrate the method’s ability to model complex fault structures, including long continuous fault surfaces, crossing faults, variably dipping segments, and subparallel faults. We test the method on both standard network catalogs and double‐difference relocated catalogs. We find that our seismicity‐based fault model results align with published 3D models that incorporate additional constraints and interpretations ( Plesch et al. , 2020 ; Aagaard and Hirakawa, 2021 ). This workflow provides a low‐user‐input solution for estimating fault geometries at depth from earthquake catalogs.

California↗
USGS2026

Earthquake catalog for the Fairbanks region of central Alaska, 2014–2024, based on waveform cross-correlation

The Fairbanks region of central Alaska is part of a broad zone of intraplate crustal deformation, situated north of the Denali fault and north of the ongoing collision and flat‐slab subduction of the Yakutat oceanic plateau. Seismicity in the Fairbanks region occurs both in diffuse areas as well as in well‐defined lineaments, such as the left‐lateral Salcha fault, which hosted the 1937 M 8 7.3 earthquake. Starting with the regional seismicity catalog, we perform waveform cross‐correlation, network‐matched filtering, and relative relocation to obtain an enhanced seismicity catalog over the time period 2014–2024. Based on the relocated catalog, we interpret a set of 15 fault segments, including two conjugate faults and two new faults east of the previously documented fault system. Considering the combined seismicity in the Minto and Fairbanks regions, the median depth of seismicity decreases from east (6 km) to west (20 km). Our interpreted faults provide guidance for future tectonic modeling and assessment of seismic hazards in this region.

Alaska↗
USGS2025

Characterization of the hydrogeologic framework, groundwater-flow system, geochemistry, and aquifer hydraulic properties of the shallow groundwater system in the Wilcox and Lorraine process areas of the Wilcox Oil Company Superfund site near Bristow, Oklahoma, 2022

The Wilcox Oil Company Superfund site (hereinafter referred to as “the site”) was formerly an oil refinery northeast of Bristow in Creek County, Oklahoma. Historical refinery operations contaminated the soil, surface water, streambed sediments, alluvium, and groundwater with refined and stored products at the site. The Wilcox and Lorraine process areas are where the highest concentrations of volatile organic compounds, semivolatile organic compounds, polycyclic aromatic hydrocarbons, and trace elements (including metals) (collectively hereinafter referred to as “contaminants”) were measured in a local shallow perched groundwater system within the alluvium (hereinafter referred to as the “alluvial aquifer”) at the site during previous site assessments. In order to understand the potential migration of contaminants through the soil and groundwater in these areas, the U.S. Geological Survey, in cooperation with the U.S. Environmental Protection Agency, investigated aquifer characteristics of the alluvial aquifer in the Wilcox and Lorraine process areas of the site to (1) document hydraulic conductivity and other aquifer characteristics of the alluvial aquifer that govern contaminant fate and transport, (2) describe the geospatial extent and concentration of the contaminants in the alluvial aquifer in the Wilcox and Lorraine process areas, and (3) describe the geochemical controls pertaining to oxidation and reduction governing the fate and transport and the degradation potential of contaminants in the groundwater. Various data were compiled and collected to evaluate the aquifer characteristics at the site including the hydrogeologic framework, groundwater-flow system, geochemistry, and hydraulic properties of the aquifer. A total of 20 new (2022) groundwater monitoring wells were installed at the site to collect data used to supplement groundwater-level altitude and groundwater-quality data collected from older, existing groundwater monitoring wells and piezometers. Data compiled and collected for the study were used to evaluate the characteristics of the alluvial aquifer at the site. These aquifer characteristics are defined by the hydrogeologic framework, groundwater-flow system, geochemistry, and hydraulic properties of the aquifer.

Oklahoma↗
USGS2024

Preliminary observations of the April 5th, 2024, Mw4.8 New Jersey earthquake

On 5 April 2024, 10:23 a.m. local time, a moment magnitude 4.8 earthquake struck Tewksbury Township, New Jersey, about 65 km west of New York City. Millions of people from Virginia to Maine and beyond felt the ground shaking, resulting in the largest number (>180,000) of U.S. Geological Survey (USGS) “Did You Feel It?” reports of any earthquake. A team deployed by the Geotechnical Extreme Events Reconnaissance Association and the National Institute of Standards and Technology documented structural and nonstructural damage, including substantial damage to a historic masonry building in Lebanon, New Jersey. The USGS National Earthquake Information Center reported a focal depth of about 5 km, consistent with a lack of signal in Interferometric Synthetic Aperture Radar data. The focal mechanism solution is strike slip with a substantial thrust component. Neither mechanism’s nodal plane is parallel to the primary northeast trend of geologic discontinuities and mapped faults in the region, including the Ramapo fault. However, many of the relocated aftershocks, for which locations were augmented by temporary seismic deployments, form a cluster that parallels the general northeast trend of the faults. The aftershocks lie near the Tewksbury fault, north of the Ramapo fault.

New Jersey↗
USGS2025

The GorDAS Distributed Acoustic Sensing experiment above the Cascadia locked zone and subducted Gorda Slab

The southernmost portion of the Cascadia Subduction zone in Northern California produces high rates of moderate and large earthquakes owing to subduction of the Gorda slab and deformation associated with the Mendocino Triple Junction. Distributed Acoustic Sensing (DAS) is rapidly advancing as a method for detecting earthquakes and imaging crustal structure. We have begun a long-term DAS monitoring experiment on buried telecom fiber in Arcata, California, with the goal of increasing the available recordings of moderate to large earthquakes as well as imaging seismogenic structures. We have recorded over a year's worth of data, including most aftershocks of the 2022 M w 6.4 Ferndale earthquake, though not the mainshock itself. The dataset includes numerous magnitude 3.5 and larger earthquakes including the 2023/01/01 M w 5.4 Rio Dell earthquake. Here we present initial results comparing an earthquake detection algorithm, run in real-time on the processing unit of the interrogator system, with both the ShakeAlert earthquake early warning system as well as a post-processed earthquake catalog developed with deep-learning phase-picker algorithms. The rapid onboard processing of the detector demonstrates the potential utility of DAS-based edge computing for earthquake early warning. We also verify the quality of the strain waveforms both in terms of peak amplitudes and waveform similarity using about five months of nodal seismometer data. These instruments were deployed roughly every 300 m along the ~15km long cable and validate large variations in peak strain over short distances that are seen in the DAS data. All data from time windows surrounding both the local and teleseismic earthquakes are publicly available, which will improve our understanding of both the performance of DAS systems in moderate earthquakes and earthquake hazards associated with the Gorda subduction zone.

California↗
USGS2026

Constraining source and path effects of large magnitude earthquakes using ground motion simulations

The purpose of this study is to use ground‐motion simulations to investigate ways in which source and path effects for large‐magnitude earthquakes can be represented in nonergodic ground‐motion models (GMMs). To achieve this, we designed a ground‐motion study in the San Francisco Bay Area that includes earthquakes with a broad range of magnitudes distributed uniformly on a fault plane, and sites covering a large range of rupture distances and azimuths. After running a large suite of kinematic simulations (magnitude 4–7), we then develop a nonergodic GMM with the simulated data. We find that trends in the within‐site residuals are affected significantly by the earthquake radiation pattern, rupture directivity, and slip patterns. Next, we modify an existing rupture directivity model to fit and remove the observed radiation pattern and rupture directivity from the residuals. We also minimize the contributions of slip patterns by averaging the within‐site residuals among multiple source realizations. Finally, after removing the source effects from the within‐site residuals, we compare the path effects computed with different magnitude groups using two approaches. The first approach only considers the small events that have the same shortest path to a site as the large events, whereas the second approach considers all small events on the fault plane. The results indicate that it is difficult to satisfactorily approximate the path effects of large events with those of small events using either approach, at least in the case of simulations.

California↗
USGS2025

National population exposure and evacuation potential in the United States to earthquake-generated tsunami threats

Previous efforts to characterize tsunami threats to people have focused primarily on individual scenarios in specific areas but have not recognized multiple scenarios across an entire country. This study addresses this gap by quantifying population exposure and evacuation potential in the United States to 102 earthquake-related, tsunami-hazard zones, including 92 local scenarios, 8 distant scenarios, and 2 probabilistic products. Geospatial path-distance modeling quantified evacuation potential and the influence of departure delays. We focused on residents to support other national, multi-hazard risk analyses. Millions of residents are in distant-tsunami zones, and hundreds of thousands of residents are in local-tsunami zones. In 41 scenarios, there is at least one resident that may have insufficient time to evacuate before wave arrival. Tens of thousands of residents may have insufficient time to evacuate from local tsunamis that impact the U.S. Pacific Northwest or Puerto Rican coastlines. The largest improvements in evacuation potential may come from reducing departure delays in some areas but may involve vertical-evacuation structures or changing land use in other areas.

International Journal of Disaster Risk Reduction↗
USGS2024

Evidence for low effective stress within the crust of the subducted Gorda plate from the 2022 December Mw 6.4 Ferndale earthquake sequence

Stress levels on and adjacent to megathrust faults at seismogenic depths remain a key but difficult to constrain parameter for assessing seismic hazard in subduction zones. Although strong ground motions have been observed to be generated from distinct, high-stress regions on the downdip end of the megathrust rupture areas in many great earthquakes, we lack direct constraints on the stress level in the lower seismogenic portion of the Cascadia megathrust. On 2022 December 20, a M w 6.4 strike-slip earthquake occurred near Ferndale, California in southern Cascadia and likely ruptured the Gorda slab crust in the lower seismogenic portion, providing an opportunity to assess the stress level in this region. Here, we relocate the Ferndale mainshock and the first two weeks of aftershocks using a high-resolution 3-D velocity model and estimate rupture dimensions, directivity, and stress drop for several M w 4-5 aftershocks and recent earthquakes. The aftershocks define a strike-slip fault in the slab crust striking ENE, consistent with the mainshock focal mechanism. The orientation of this fault is about 45 ° off the ideally oriented fault plane given the stress state in the slab. The aftershock zone is extensive and broad in the forward direction of the mainshock rupture but still constrained within the volume of high Vp/Vs within the slab crust. Our stress drop estimates are generally lower for M w 4-5 earthquakes located within the slab crust compared to those a few km deeper in the slab mantle. Combined, our results support a relatively low effective stress level in the vicinity of the megathrust in the lower portion of the seismogenic zone in southern Cascadia, likely due to elevated fluid pressures. Consequently, the ground motion in the onshore region above this low-stress seismogenic portion in southern Cascadia may not be as intense as that observed during great earthquakes in other subduction zones.

California↗
USGS2026

The U.S. Geological Survey 2025 Puerto Rico and U.S. Virgin Islands time-independent earthquake rupture forecast

We present the 2025 U.S. Geological Survey Puerto Rico and U.S. Virgin Islands (PRVI) time‐independent earthquake rupture forecast (ERF), developed for the 2025 update to the National Seismic Hazard Model (NSHM) for PRVI. The updated ERF improves upon a prior model from 2003, including an expanded fault inventory with slip‐rate estimates, updated seismicity catalogs, and refined subduction zone geometries and deformation models. It applies the fault‐system inversion methodology to solve for rates of ruptures on modeled faults, adapted from the 2023 NSHM (NSHM23) for the western United States, including the first application of the inversion to model rates on a U.S. subduction interface. Off‐fault and intraslab seismicity are constrained by observed seismicity and use updated methods developed for NSHM23. Uncertainties in model components are substantial, and the ERF represents epistemic uncertainties through a comprehensive logic tree consisting of 1.7 billion logic‐tree branches combined across all sources.

Puerto Rico, U.S. Virgin Islands↗
USGS1976

Digital telemetry system network installation for the National Earthquake Information Service

A Digital Telemetry System Network, developed by the Albuquerque Seismological Laboratory, was installed for the USGS National Earthquake Information Service (NEIS) during January 1975. NEIS is located in Golden, Colorado. The initial Digital Telemetry System Network consists of four independent digital telemetry systems that provide wide area coverage over most of the United States. The four systems were installed between: Albuquerque, New Mexico to NEIS; St. Louis, Missouri to NEIS; Salt Lake City, Utah to NEIS; and Menlo Park, California to NEIS. Each digital telemetry system will transmit fourteen channels of high accuracy seismic data in a digital format over a standard C-1 grade telephone line. Digitized data words will have a resolution of eleven digital bits plus one sign bit. Each digital telemetry receiver, located at NEIS, will have the capacity to provide fourteen channels of seismic data in a digital format suitable for either on-line digital computer analysis or magnetic tape recording. In addition the data can be presented in an analog format suitable for recording on helicorders or develocorders. This network is the first large scale digital telemetry system used by the U.S. Geological Survey for the transmission of real time seismic data.

Open-File Report↗
USGS2024

Debris avalanches in the northern California Coast Range triggered by plate boundary earthquakes

Determining the timing and cause for ancient hillslope failures proves difficult in the western United States, yet critical as it ties directly into groundmotion estimates for hazardous events. This knowledge gap is important to confront as hillslope failures are candidates to be triggered by earthquakes along active plate boundaries. We identify two prehistoric, i.e., preinstrumental history, debris avalanches (3 10^6 and 6 10^6 m^3) in the Coast Ranges of northern California. These debris avalanches are well suited for studying the timing (to the exact year) and trigger as the densely forested landscape enables effective use of dendrochronology and high-resolution radiocarbon to pinpoint time of failure, and the legacy of landslide studies in the region provides context for evaluating a seismic trigger as the most likely triggering mechanism. Neither debris avalanche was triggered by the largest precipitation event of the instrumental record in 1964 CE, and the two debris avalanche sites are physiographically suited to accommodate topographic amplification of seismic shaking. Through a suite of geologic and dendrochronologic evidence, we establish the likely time of failure of the two debris avalanches as 1906 CE and 933 CE. The failure of the younger landslide coincides with the 1906 CE San Francisco earthquake on the Pacific/North American plate boundary, while the older landslide dates to 933 CE falling within the broad age range (850-966 CE) of a likely megathrust earthquake on the Cascadia subduction zone as recorded in coastal marshes in Humboldt Bay, California. The precise age on the 933 CE debris avalanche could trim the uncertainty on a Cascadia subduction zone event from 116 years to one year. Utilizing debris avalanche records from sites suitable to record seismic shaking improves understanding of plate-boundary earthquake timing and extent of shaking.

Bulletin of the Seismological Society of America↗