SEARCH · USGS Science

Results for “Outcrop”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 361 records · Page 20Linked to original sources

USGS1992

Sulfur isotopic disequilibrium and fluid-rock interaction during metamorphism of sulfidic black shales from the Waterville-Augusta area, Maine, USA

Sulfur isotope ratios of pyrite (py) and pyrrhotite (po) from regionally metamorphosed graphitic sulfidic schists and related rocks from south-central Maine, USA, were analysed using SO 2 and SF 6 techniques. There is a broad range in δ 34 S values for both pyrite and pyrrhotite at most outcrops, up to 8%. and overall the values are isotopically light, averaging ~ −27‰ for the entire data set, suggesting that the rocks have not been grossly isotopically disturbed by regional metamorphism from their inferred organic-rich sedimentary origins. At all temperatures from chlorite to sillimanite grades, sulfide analysed from veins and blebs within the schists show predominantly disequilibrium fractionations ranging from Δ 34 S py-po −3.0 to +3.5‰ "> Δ 34 S py-po −3.0to+3.5‰ , as do matrix sulfides from rocks that attained temperatures <500°C. Only at T > 500° C do matrix pyrite-pyrrhotite pairs with polygonal or aligned granoblastic microstructures approach isotopic equilibrium at millimeter to centimeter scales, suggesting that the process that favoured equilibration was recrystallization accompanying metamorphism and deformation. This disequilibrium may be a function of preferential interaction of one of the phases with an infiltrating fluid, but the lack of any systematic trends in the data, particularly with both negative and positive Δ 34 S py-po at some outcrops, does not permit ready identification of fluid sources, fluxes, or compositions. By combining published fluid fluxes for the area and a knowledge of the mass of sulfur contained in the rocks and the inferred infiltrating fluid, it appears that sulfur should have been homogenized over at least 10's to 1000's of meters, if equilibrium had been attained between rock sulfides and an infiltrating fluid of constant composition. That this did not occur was probably due to lack of equilibration between sulfides and the fluid but may also have arisen because of channelling of fluid flow along rather than across layers, or a lack of fluid infiltration through this unit.

Geochimica et Cosmochimica Acta↗

USGS1989

Variations in fluvial style in the Westwater Canyon Member, Morrison formation (Jurassic), San Juan basin, Colorado plateau

Techniques of architectural element analysis and lateral profiling have been applied to the fluvial Westwater Canyon Member of the Morrison Formation (Jurassic) in southern San Juan Basin. On a large scale, the sandstone-body architecture consists mainly of a series of tabular sandstone sheets 5–15 m thick and hundreds of meters wide, separated by thin fine-grained units. Internally these sheets contain lateral accretion surfaces and are cut by channels 10–20 m deep and at least 250 m wide. On a more detailed scale, interpretations made from large-scale photomosaics show a complex of architectural elements and bounding surfaces. Typical indicators of moderate- to high-sinuosity channels (lateral accretion deposits) coexist in the same outcrop with downstream-accreted macroform deposits that are typical of sand flats of low-sinuosity, multiple-channel rivers. Broad, deep channels with gently to steeply dipping margins were mapped in several of the outcrops by carefully tracing major bounding surfaces. Locally thick accumulations of plane-laminated and low-angle cross-laminated sandstone lithofacies suggest rapid flow, probably transitional to upper flow regime conditions. Such a depositional style is most typical of ephemeral rivers or those periodically undergoing major seasonal (or more erratic) stage fluctuations, an interpretation consistent with independent mineralogical evidence of aridity. Fining-upward sequences are rare in the project area, contrary to the descriptions of Campbell (1976). The humid alluvial fan model of Galloway (1978) cannot be substantiated and, similarly, the architectural model of Campbell (1976) requires major revision. Comparisons with the depositional architecture of the large Indian rivers, such as the Ganges and Brahmaputra, still seem reasonable, as originally proposed by Campbell (1976), although there is now convincing evidence for aridity and for major stage fluctuations, which differs both from those modern rivers and Campbell's interpretation.

Arizona, Colorado, New Mexico, Utah↗

USGS1991

Physiography, surficial sediments and Quaternary stratigraphy of the inner continental shelf and nearshore region of the Gulf of Maine

The western margin of the Gulf of Maine is a bedrock-framed, glaciated continental shelf that has only recently been geologically mapped. The bathymetry is divisible into four physiographic areas: nearshore basins, shelf valleys, rocky zones, and outer basins. The nearshore basins are largely floored by mud except near rock outcrops where shelly gravel occurs. Shelf valleys extend seaward from nearshore basins and estuaries and generally possess less sediment than nearshore basins. Abundant exposures of Pleistocene sediment with rippled substrates suggest that contemporary reworking is occurring. Rocky zones are the most abundant physiographic area and include both exposed bedrock and glacial gravel outcrops. Shell material produced by organisms living on or near rocks is common both in the rocky zones and in abutting environments. The outer basin begins at a depth of about 60 m and extends beyond the 100 m isobath. This area is occasionally bordered on its landward side by the late Quaternary lowstand shoreline. Below this shoreline thicker deposits of sediment exist, while all environments landward were reworked by a regression and transgression of the sea.

Gulf of Maine↗

USGS1998

Erosion, weathering, and sedimentation

This chapter explains how a variety of nuclides have been applied to catchments throughout the world. One of the most exciting new approaches for quantifying the rate at which catchments erode is the measurement of in situ produced cosmogenic nuclides. The commonly applied nuclides for erosion rate measurements are 3 He, 10 Be, 26 A1, and 36 C1. Use of such nuclides was restricted to determining denudation rates of exposed bedrock outcrops. It appears that samples have generally been collected from outcrops standing above the surrounding landscape. These protrusions of bedrock may erode more slowly because they shed water rapidly, thus reducing the efficacy of chemical weathering. Geomorphologists have used sediment deposits or suspended particle loads in rivers to evaluate erosive processes in catchments. Linking this approach to fluxes of anthropogenic radionuclides such as 137 Cs or natural 210 Pb opens up a new avenue for understanding processes such as particle formation via weathering, soil formation, denudation, transport, and sedimentation. There are some factors that must be considered when attempting to use Sr isotopes to identify solute sources or quantify mineral weathering rates or processes at the catchment scale. First, 87 Sr/ 86 Sr observed in streamflow probably does not reflect current weathering in the catchment but rather a partial integration of the weathering history and the evolution of the cation exchange pool. Second, Sr release must be distinguished from mineral dissolution as a bulk mass transfer process in cases where Sr may be preferentially lost from the mineral relative to more tightly bound cations. Third, an understanding of the emplacement history of catchment soil substrates, for example, moraine vs. alluvium; residuum vs. colluvium; fractured vs. massive bedrock, may be critical to confirming the weathering reactions inferred from the Sr isotopes.

Book chapter↗

USGS2009

Airborne gamma-ray and magnetic anomaly signatures of serpentinite in relation to soil geochemistry, northern California

Serpentinized ultramafic rocks and associated soils in northern California are characterized by high concentrations of Cr and Ni, low levels of radioelements (K, Th, and U) and high amounts of ferrimagnetic minerals (primarily magnetite). Geophysical attributes over ultramafic rocks, which include airborne gamma-ray and magnetic anomaly data, are quantified and provide indirect measurements on the relative abundance of radioelements and magnetic minerals, respectively. Attributes are defined through a statistical modeling approach and the results are portrayed as probabilities in chart and map form. Two predictive models are presented, including one derived from the aeromagnetic anomaly data and one from a combination of the airborne K, Th and U gamma-ray data. Both models distinguish preferential values within the aerogeophysical data that coincide with mapped and potentially unmapped ultramafic rocks. The magnetic predictive model shows positive probabilities associated with magnetic anomaly highs and, to a lesser degree, anomaly lows, which accurately locate many known ultramafic outcrops, but more interestingly, locate potentially unmapped ultramafic rocks, possible extensions of ultramafic bodies that dip into the shallow subsurface, as well as prospective buried ultramafic rocks. The airborne radiometric model shows positive probabilities in association with anomalously low gamma radiation measurements over ultramafic rock, which is similar to that produced by gabbro, metavolcanic rock, and water bodies. All of these features share the characteristic of being depleted in K, Th and U. Gabbro is the only rock type in the study area that shares similar magnetic properties with the ultramafic rock. The aerogeophysical model results are compared to the distribution of ultramafic outcrops and to Cr, Ni, K, Th and U concentrations and magnetic susceptibility measurements from soil samples. Analysis of the soil data indicates high positive correlation between magnetic susceptibilities and concentration of Cr and Ni. Although the study focused on characterizing the geophysical properties of ultramafic rocks and associated soils, it has also yielded information on other rock types in addition to ultramafic rocks, which can also locally host naturally-occurring asbestos; specifically, gabbro and metavolcanic rocks.

Applied Geochemistry↗

USGS2005

Secondary sulfate minerals associated with acid drainage in the eastern US: Recycling of metals and acidity in surficial environments

Weathering of metal-sulfide minerals produces suites of variably soluble efflorescent sulfate salts at a number of localities in the eastern United States. The salts, which are present on mine wastes, tailings piles, and outcrops, include minerals that incorporate heavy metals in solid solution, primarily the highly soluble members of the melanterite, rozenite, epsomite, halotrichite, and copiapite groups. The minerals were identified by a combination of powder X-ray diffraction (XRD), scanning electron microscopy (SEM), and electron-microprobe. Base-metal salts are rare at these localities, and Cu, Zn, and Co are commonly sequestered as solid solutions within Fe- and Fe-Al sulfate minerals. Salt dissolution affects the surface-water chemistry at abandoned mines that exploited the massive sulfide deposits in the Vermont copper belt, the Mineral district of central Virginia, the Copper Basin (Ducktown) mining district of Tennessee, and where sulfide-bearing metamorphic rocks undisturbed by mining are exposed in Great Smoky Mountains National Park in North Carolina and Tennessee. Dissolution experiments on composite salt samples from three minesites and two outcrops of metamorphic rock showed that, in all cases, the pH of the leachates rapidly declined from 6.9 to <3.7, and specific conductance increased gradually over 24 h. Leachates analyzed after 24-h dissolution experiments indicated that all of the salts provided ready sources of dissolved Al (>30 mg L-1), Fe (>47 mg L-1), sulfate (>1000 mg L-1), and base metals (>1000 mg L-1 for minesites, and 2 mg L-1 for other sites). Geochemical modeling of surface waters, mine-waste leachates, and salt leachates using PHREEQC software predicted saturation in the observed ochre minerals, but significant concentration by evaporation would be needed to reach saturation in most of the sulfate salts. Periodic surface-water monitoring at Vermont minesites indicated peak annual metal loads during spring runoff. At the Virginia site, where no winter-long snowpack develops, metal loads were highest during summer months when salts were dissolved periodically by rainstorms following sustained evaporation during dry spells. Despite the relatively humid climate of the eastern United States, where precipitation typically exceeds evaporation, salts form intermittently in open areas, persist in protected areas when temperature and relative humidity are appropriate, and contribute to metal loadings and acidity in surface waters upon dissolution, thereby causing short-term perturbations in water quality.

Chemical Geology↗

USGS2004

Geologic history of natural coal-bed fires, Powder River basin, USA

Coal-bed fires ignited by natural processes have baked and fused overlying sediments to form clinker, a hard red or varicolored rock, through much of the northern Great Plains of the United States (USA). The gently dipping coal beds in the region burn when regional downwasting brings them above the local water table. The resulting clinker forms a rim along the exposed edge of the coal bed in an ongoing process through geologic time. The resistant clinker is left capping buttes and ridges after the softer unbaked strata erode away. Clinker outcrops cover more than 4100 km2 in the Powder River basin (PRB), which lies in Wyoming (WY) and Montana (MT). The clinker in place records tens of billions of tons of coal that have burned, releasing gases into the atmosphere. The amount of clinker that has eroded away was at least an order of magnitude greater than the clinker that remains in place. Fission-track and uranium-thorium/ helium ages of detrital zircon crystals in clinker, and paleomagnetic ages of clinker, show that coal beds have burned naturally during at least the past 4 million years (Ma). The oldest in-place clinker that has been dated, collected from a high, isolated, clinker-capped ridge, has a fission track age of 2.8??0.6 Ma. Evidence of erosion and downcutting is also preserved by clinker clasts in gravel terraces. One clinker boulder in a terrace 360 m above the Yellowstone River has a fission track age of 4.0??0.7 Ma. Coal-bed fires are caused by lightning, wildfires, spontaneous combustion, or human activity on coal outcrops and in mines. Miners, government agencies, and ranchers have extinguished thousands of coal bed fires, but natural ignition continues where fresh coal has access to air. At any given time, hundreds of fires, mostly small, are burning. In the Powder River basin, the total amount of coal burned by natural fires in the last 2 Ma is one to two orders of magnitude greater than the total amount of coal removed by mining in the past century. However, current annual rates of coal mining are three to four orders of magnitude greater than estimated prehistoric annual rates of coal consumption by natural fires. ?? 2004 Published by Elsevier B.V.

International Journal of Coal Geology↗

USGS2004

Stratigraphy and sedimentology of the Upper Cretaceous (Campanian) Anacacho Limestone, Texas, USA

The Upper Cretaceous Anacacho Limestone is exposed in outcrops between the cities of San Antonio and Del Rio, Texas. A detailed study of four outcrops (Blanco Creek section, Sabinal River section, Seco Creek section, Hondo Creek section) shows that the Anacacho Limestone rests on the Upson Clay (which contains fauna of early Campanian age) and is overlain by the Corsicana Marl (which contains fauna of early Maastrichtian age). An unconformity within the Anacacho Limestone is used herein to separate the limestone into a lower member and an upper member. The lower Anacacho member contains fauna of early Campanian age, whereas the upper Anacacho member contains fauna of middle Campanian age. The lower Anacacho member consists predominantly of wackestones to packstones, which are overlain by packstones to grainstones capped by the unconformity. This unconformity is interpreted as a marine flooding surface, delineating a transition from carbonate grainstones deposited in shallow water (<30 m depth) to a chalk deposited in deeper water. Above the unconformity, the upper Anacacho member is characterized by a chalk, overlain by wackestones and packstones. The uppermost section of the Anacacho Limestone consists of packstones and grainstones with abundant and diverse fossils. Most of the Anacacho Limestone developed in relatively shallow water (<50 m depth) leeward of a large carbonate build-up (possibly a rudistid reef) that now comprises the Anacacho Mountains. The environment, however, was open to marine water throughout deposition of the Anacacho Limestone. ?? 2004 Elsevier Ltd. All rights reserved.

Cretaceous Research↗

USGS2007

Barite-forming environments along a rifted continental margin, Southern California Borderland

The Southern California Continental Borderland (SCCB) is part of the broad San Andreas transform-fault plate boundary that consists of a series of fault-bounded, petroleum-generating basins. The SCCB has high heat flow and geothermal gradients produced by thinned continental crust and Neogene volcanism. Barite deposits in the SCCB occur along faults. Barite samples from two sea-cliff sites and four offshore sites in the SCCB were analyzed for mineralogy, chemical (54 elements) and isotopic (S, Sr) compositions, and petrography. Barite from Palos Verdes (PV) Peninsula sea-cliff outcrops is hosted by the Miocene Monterey Formation and underlying basalt; carbonate rocks from those outcrops were analyzed for C, O, and Sr isotopes and the basalt for S isotopes. Cold-seep barite from Monterey Bay, California was analyzed for comparison. SCCB offshore samples occur at water depths from about 500 to 1800 m. Those barites vary significantly in texture and occurrence, from friable, highly porous actively growing seafloor mounds to dense, brecciated, vein barite. This latter type of barite contrasts with cold-seep barite in being much more coarse grained, forms thick veins in places, and completely replaced rock clasts in breccia. The barite samples range from 94 to 99 wt% BaSO4, with low trace-element contents, except for high Sr, Zr, Br, U, and Hg concentrations compared to their crustal abundances. δ34S for SCCB offshore barites range from 21.6‰ to 67.4‰, and for PV barite from 62‰ to 70‰. Pyrite from PV sea-cliff basalt and sedimentary rocks that host the barites averages 7.8‰ and 2.2‰, respectively. Two offshore barite samples have δ34S values (21.6‰, 22.1‰) close to that of modern seawater sulfate, whereas all other samples are enriched to strongly enriched in 34S. 87Sr/86Sr ratios for the barites vary over a narrow range of 0.70830–0.70856 and are much lower than that of modern seawater and also lower than the middle Miocene seawater ratio, the time of deposition of the host rocks for the PV samples. This indicates that the mineralizing fluids were not unaltered seawater. We develop a model in which the barites precipitated both below the sediment–water interface and at the seafloor from low-temperature fluids that circulated along faults. The isotopic, chemical, and textural data indicate that the barites formed by several processes. Mesozoic and Cenozoic basement rocks (crystalline and overlying sedimentary rocks), Quaternary basin fill, turbidite fans, and seawater provided various elements for the barites in different environments. The fluids had a deep-seated source and were hydrothermal in the deeper parts of the system for all the barite types, including the seafloor cold-seep deposit, based on Sr isotopes and regional geothermal gradients. These deep-seated fluids mixed with other fluids as they ascended, including seawater at and near the seafloor. The high δ34S values may have resulted from extreme Rayleigh fractionation during bacterially mediated (semi)closed-system sulfate reduction, probably driven by the flux of methane- and hydrocarbon-bearing fluids through basement rocks and basin sediments. Early diagenetic dolomite and pyrite in the host Monterey Formation in the PV Headland also formed in a zone of sulfate reduction, but within sediment buried only centimeters to a few meters and with a predominantly seawater source for the sulfur. Dolomite occurring with vein barite in the PV Headland formed at temperatures in the range of 40–90 °C. The cold-seep barites have δ34S values near that of modern seawater, although still somewhat fractionated. The barites that precipitated below the sediment–water interface have higher δ34S values, suggesting that the fluids were relatively reduced with molar dissolved barium in excess of dissolved sulfate. Those samples were exposed at the seafloor by uplift along faults and are composed predominantly of massive, brecciated, and vein barite.

California↗

USGS2012

Correlation of clayey gouge in a surface exposure of the San Andreas fault with gouge at depth from SAFOD: Implications for the role of serpentinite in fault mechanics

Magnesium-rich clayey gouge similar to that comprising the two actively creeping strands of the San Andreas Fault in drill core from the San Andreas Fault Observatory at Depth (SAFOD) has been identified in a nearby outcrop of serpentinite within the fault zone at Nelson Creek. Each occurrence of the gouge consists of porphyroclasts of serpentinite and sedimentary rocks dispersed in a fine-grained, foliated matrix of Mg-rich smectitic clays. The clay minerals in all three gouges are interpreted to be the product of fluid-assisted, shear-enhanced reactions between quartzofeldspathic wall rocks and serpentinite that was tectonically entrained in the fault from a source in the Coast Range Ophiolite. We infer that the gouge at Nelson Creek connects to one or both of the gouge zones in the SAFOD core, and that similar gouge may occur at depths in between. The special significance of the outcrop is that it preserves the early stages of mineral reactions that are greatly advanced at depth, and it confirms the involvement of serpentinite and the Mg-rich phyllosilicate minerals that replace it in promoting creep along the central San Andreas Fault.

California↗

USGS2004

Oil/source rock correlations in the Polish Flysch Carpathians and Mesozoic basement and organic facies of the Oligocene Menilite Shales: Insights from hydrous pyrolysis experiments

The Oligocene Menilite Shales in the study area in the Polish Flysch Carpathians are organic-rich and contain varying mixtures of Type-II, Type-IIS and Type-III kerogen. The kerogens are thermally immature to marginally mature based on atomic H/C ratios and Rock-Eval data. This study defined three organic facies, i.e., sedimentary strata with differing hydrocarbon-generation potentials due to varying types and concentrations of organic matter. These facies correspond to the Silesian Unit and the eastern and western portions of the Skole Unit. Analysis of oils generated by hydrous pyrolysis of outcrop samples of Menilite Shales demonstrates that natural crude oils reservoired in the flysch sediments appear to have been generated from the Menilite Shales. Natural oils reservoired in the Mesozoic basement of the Carpathian Foredeep appear to be predominantly derived and migrated from Menilite Shales, with a minor contribution from at least one other source rock most probably within Middle Jurassic strata. Definition of organic facies may have been influenced by the heterogeneous distribution of suitable Menilite Shales outcrops and producing wells, and subsequent sample selection during the analytical phases of the study. ?? 2004 Elsevier Ltd. All rights reserved.

Conference Paper↗

USGS2000

A seismic landslide susceptibility rating of geologic units based on analysis of characterstics of landslides triggered by the 17 January, 1994 Northridge, California earthquake

One of the most significant effects of the 17 January, 1994 Northridge, California earthquake ( M =6.7) was the triggering of thousands of landslides over a broad area. Some of these landslides damaged and destroyed homes and other structures, blocked roads, disrupted pipelines, and caused other serious damage. Analysis of the distribution and characteristics of these landslides is important in understanding what areas may be susceptible to landsliding in future earthquakes. We analyzed the frequency, distribution, and geometries of triggered landslides in the Santa Susana 7.5′ quadrangle, an area of intense seismic landslide activity near the earthquake epicenter. Landslides occurred primarily in young (Late Miocene through Pleistocene) uncemented or very weakly cemented sediment that has been repeatedly folded, faulted, and uplifted in the past 1.5 million years. The most common types of landslide triggered by the earthquake were highly disrupted, shallow falls and slides of rock and debris. Far less numerous were deeper, more coherent slumps and block slides, primarily occurring in more cohesive or competent materials. The landslides in the Santa Susana quadrangle were divided into two samples: single landslides (1502) and landslide complexes (60), which involved multiple coalescing failures of surficial material. We described landslide morphologies by computing simple morphometric parameters (area, length, width, aspect ratio, slope angle). To quantify and rank the relative susceptibility of each geologic unit to seismic landsliding, we calculated two indices: (1) the susceptibility index, which is the ratio (given as a percentage) of the area covered by landslide sources within a geologic unit to the total outcrop area of that unit; and (2) the frequency index [given in landslides per square kilometer (ls/km 2 )], which is the total number of landslides within each geologic unit divided by the outcrop area of that unit. Susceptibility categories include very high (>2.5% landslide area or >30 ls/km 2 ), high (1.0–2.5% landslide area or 10–30 ls/km 2 ), moderate (0.5–1.0% landslide area or 3–10 ls/km 2 ), and low (<0.5% landslide area and <3 ls/km 2 ).

California↗

USGS2002

Variability in form and growth of sediment waves on turbidite channel levees

Fine-grained sediment waves have been observed in many modern turbidite systems, generally restricted to the overbank depositional element. Sediment waves developed on six submarine fan systems are compared using high-resolution seismic-reflection profiles, sediment core samples (including ODP drilling), multibeam bathymetry, 3D seismic-reflection imaging (including examples of burried features), and direct measurements of turbidity currents that overflow their channels. These submarine fan examples extend over more than three orders of magnitude in physical scale. The presence or absence of sediment waves is not simply a matter of either the size of the turbidite channel-levee systems or the dominant initiation process for the turbidity currents that overflow the channels to form the wave fields. Both sediment-core data and seismic-reflection profiles document the upslope migration of the wave forms, with thicker and coarser beds deposited on the up-current flank of the waves. Some wave fields are orthogonal to channel trend and were initiated by large flows whose direction was controlled by upflow morphology, whereas fields subparallel to channel levees resulted from local spillover. In highly meandering systems, sediment waves may mimic meander planform. Larger sediment waves form on channel-levee systems with thicker overflow of turbidity currents, but available data indicate that sediment waves can be maintaned during conditions of relatively thin overflow. Coarser-grained units in sediment waves are typically laminated and thin-bedded sand as much as several centimetres thick, but sand beds as thick as several tens of centimetres have been documented from both modern and buried systems. Current production of hydrocarbons from sediment-wave deposits suggests that it is important to develop criteria for recognising this overbank element in outcrop exposures and borehole data, where the wavelength of typical waves (several kilometres) generally exceeds outcrop scales and wave heights, which are reduced as a result of consolidation during burial, may be too subtle to recognise. Crown Copyright ?? 2002 Published by Elsevier Science B.V. All rights reserved.

Marine Geology↗

USGS1997

Palynology of the Lost Branch Formation of Kansas - New insights on the major floral transition at the Middle-Upper Pennsylvanian boundary

Palynological assemblages from two outcrops of the upper part of the Memorial Formation, the Lost Branch Formation, and the overlying Hepler unit in Kansas were examined to discover which stratigraphic interval marks the change from the lycopod-dominated coal swamp floras of Middle Pennsylvanian (Westphalian D) age to the fern-dominated coal swamp floras of Late Pennsylvanian (Stephanian) age. The Lost Branch Formation underlies the Pleasanton Group, whose base is recognized as the Middle-Upper Pennsylvanian boundary in the Midcontinent. The outcrops include the youngest Middle Pennsylvanian coal (Dawson), just below the Lost Branch Formation, and the oldest Upper Pennsylvanian coal ('Hepler') within the Pleasanton Group. Lycospora dominates the spore assemblage in the Middle Pennsylvanian (Desmoinesian) Dawson coal in the Memorial Shale and is abundant in shale between the coal and just below the Glenpool limestone bed at the top of the Lost Branch Formation. It is rare between the limestone and the Upper Pennsylvanian (Missourian) 'Hepler' coal. Granasporites medius and Thymospora pseudothiessenii disappear below the limestone. The 'Hepler' coal is dominated by fern and seed fern spores Cyclogranisporites and Apiculatasporites, and the sphenopsid spore Calamospora is third in abundance. Florinites, Potonieisporites and other gymnospermic monosaccate pollen are abundant between the two coals. Bisaccate conifer-like pollen, such as Protohaploxipinus, are most common between the Dawson coal and Glenpool limestone, but Wilsonites, which is thought to have been produced by seed ferns, is very abundant from the Glenpool limestone to the 'Hepler' coal. On the basis of macroinvertebrate evidence, the Glenpool limestone is Middle Pennsylvanian in age, but the palynological evidence indicates that the floral change took place slightly before deposition of the limestone. Thus, the major change in climate that occurred near the Middle-Upper Pennsylvanian boundary apparently affected the floras earlier than the faunas. The floral change cannot be explained as resulting from a major marine regression and hiatus because the change is recorded in a marine section within a single transgressive-regressive sequence.

Review of Palaeobotany and Palynology↗

USGS1999

Depositional history of the Fire Clay coal bed (Late Duckmantian), Eastern Kentucky, USA

More than 3800 coal thickness measurements, proximate analyses from 97 localities, and stratigraphic and sedimentological analyses from more than 300 outcrops and cores were used in conjunction with previously reported palynological and petrographic studies to map individual benches of the coal and document bench-scale variability in the Fire Clay (Hazard No. 4) coal bed across a 1860 km2 area of the Eastern Kentucky Coal Field. The bench architecture of the Fire Clay coal bed consists of uncommon leader benches, a persistent but variable lower bench, a widespread, and generally thick upper bench, and local, variable rider benches. Rheotrophic conditions are inferred for the leader benches and lower bench based on sedimentological associations, mixed palynomorph assemblages, locally common cannel coal layers, and generally high ash yields. The lower bench consistently exhibits vertical variability in petrography and palynology that reflects changing trophic conditions as topographic depressions infilled. Infilling also led to unconfined flooding and ultimately the drowning of the lower bench mire. The drowned mire was covered by an air-fall volcanic-ash deposit, which produced the characteristic flint clay parting. The extent and uniform thickness of the parting suggests that the ash layer was deposited in water on a relatively flat surface without a thick canopy or extensive standing vegetation across most of the study area. Ash deposits led to regional ponding and establishment of a second planar mire. Because the topography had become a broadly uniform, nutrient-rich surface, upper-bench peats became widespread with large areas of the mire distant to clastic sources. Vertical sections of thick (> 70 cm), low-ash yield, upper coal bench show a common palynomorph change from arborescent lycopod dominance upward to fern and densospore-producing, small lycopod dominance, inferred as a shift from planar to ombrotrophic mire phases. Domed mires appear to have been surrounded by wide areas of planar mires, where the coal was thinner (< 70 cm), higher in ash yield, and dominated by arborescent lycopods. Rectangular thickness trends suggest that syndepositional faulting influenced peat accumulation, and possibly the position of the domed mire phase. Faulting also influenced post-depositional clastic environments of deposition, resulting in sandstone channels with angular changes in orientation. Channels and lateral facies were locally draped by high-ash-yield rider coal benches, which sometimes merged with the upper coal bench. These arborescent-lycopod dominant rider coal benches were profoundly controlled by palcotopography, much like the leader coal benches. Each of the benches of coal documented here represent distinctly different mires that came together to form the Fire Clay coal bed, rather than a single mire periodically split by clastic influx. This is significant as each bench of the coal has its own characteristics, which contribute to the total coal characteristics. The large data set allows interpretation of both vertical and lateral limits to postulated domed phases in the upper coal bench, and to the delineation of subtle tectonic structures that allow for meaningful thickness projections beyond the limits of present mining.A study was conducted to analyze the depositional history of the Fire Clay coal bed in the eastern Kentucky coal field. The study involved over 3800 coal thickness measurements, proximate analyses from 97 localities, and stratigraphic and sedimentological analyses from more than 300 outcrops and cores in conjunction with previously reported palynological and petrographic studies to map individual benches of the coal and document bench-scale variability.

International Journal of Coal Geology↗

USGS1999

Kinematic analysis of melange fabrics: Examples and applications from the McHugh Complex, Kenai Peninsula, Alaska

Permian to Cretaceous melange of the McHugh Complex on the Kenai Peninsula, south-central Alaska includes blocks and belts of graywacke, argillite, limestone, chert, basalt, gabbro, and ultramafic rocks, intruded by a variety of igneous rocks. An oceanic plate stratigraphy is repeated hundreds of times across the map area, but most structures at the outcrop scale extend lithological layering. Strong rheological units occur as blocks within a matrix that flowed around the competent blocks during deformation, forming broken formation and melange. Deformation was noncoaxial, and disruption of primary layering was a consequence of general strain driven by plate convergence in a relatively narrow zone between the overriding accretionary wedge and the downgoing, generally thinly sedimented oceanic plate. Soft-sediment deformation processes do not appear to have played a major role in the formation of the melange. A model for deformation at the toe of the wedge is proposed in which layers oriented at low angles to ??1 are contracted in both the brittle and ductile regimes, layers at 30-45??to ??1 are extended in the brittle regime and contracted in the ductile regime, and layers at angles greater than 45??to ??1 are extended in both the brittle and ductile regimes. Imbrication in thrust duplexes occurs at deeper levels within the wedge. Many structures within melange of the McHugh Complex are asymmetric and record kinematic information consistent with the inferred structural setting in an accretionary wedge. A displacement field for the McHugh Complex on the lower Kenai Peninsula includes three belts: an inboard belt of Late Triassic rocks records west-to-east-directed slip of hanging walls, a central belt of predominantly Early Jurassic rocks records north-south directed displacements, and Early Cretaceous rocks in an outboard belt preserve southwest-northeast directed slip vectors. Although precise ages of accretion are unknown, slip directions are compatible with inferred plate motions during the general time frame of accretion of the McHugh Complex. The slip vectors are interpreted to preserve the convergence directions between the overriding and underriding plates, which became more oblique with time. They are not considered indicative of strain partitioning into belts of orogen-parallel and orogen-perpendicular displacements, because the kinematic data are derived from the earliest preserved structures, whereas fabrics related to strain partitioning would be expected to be superimposed on earlier accretion-related fabrics.Permian to Cretaceous melange of the McHugh Complex on the Kenai Peninsula, south-central Alaska includes blocks and belts of graywacke, argillite, limestone, chert, basalt, gabbro, and ultramafic rocks, intruded by a variety of igneous rocks. An oceanic plate stratigraphy is repeated hundreds of times across the map area, but most structures at the outcrop scale extend lithological layering. Strong rheological units occur as blocks within a matrix that flowed around the competent blocks during deformation, forming broken formation and melange. Deformation was noncoaxial, and disruption of primary layering was a consequence of general strain driven by plate convergence in a relatively narrow zone between the overriding accretionary wedge and the downgoing, generally thinly sedimented oceanic plate. Soft-sediment deformation processes do not appear to have played a major role in the formation of the melange. A model for deformation at the toe of the wedge is proposed in which layers oriented at low angles to ??1 are contracted in both the brittle and ductile regimes, layers at 30-45?? to ??1 are extended in the brittle regime and contracted in the ductile regime, and layers at angles greater than 45?? to ??1 are extended in both the brittle and ductile regimes. Imbrication in thrust duplexes occurs at deeper levels within the wedge. Many structures within melange of the McHugh Complex are asymmetric and record

Journal of Structural Geology↗

USGS1997

Environmental geochemistry of shale-hosted Ag-Pb-Zn massive sulfide deposits in northwest Alaska: Natural background concentrations of metals in water from mineralized areas

Red Dog, Lik and Drenchwater are shale-hosted stratiform Ag-Pb-Zn massive sulfide deposits in the northwestern Brooks Range. Natural background concentrations of metals in waters from the undisturbed (unmined) Drenchwater prospect and Lik deposit were compared to pre-mining baseline studies conducted at Red Dog. The primary factors affecting water chemistry are the extent of exposure of the deposits, the grade of mineralization, the presence of carbonate reeks in the section, and the proportion of Fe-sulfide in the ore. Surface water samples from the Drenchwater prospect, which has pyrite-dominant mineralization exposed in outcrop, have pH values as low as 2.8 and high dissolved concentrations of metals including as much as 95 mg 1-1 Al, 270 mg 1-1 Fe, 8 ??1-1 Cd, 10 ??1-1 Pb, and 2600 ??1-1 Zn, with As up to 26 ??g1-1. Surface waters from the Red Dog deposit prior to mining were also acidic and metal-rich, however, dissolved metal concentrations in Red Dog waters were many times greater. The higher metal concentrations in Red Dog waters reflect the high Zn grades and the abundant sphalerite, pyrite, and galena that were present in outcrop prior to mining. In contrast, despite significant mineralization at the Lik deposit, carbonate rocks in the section buffer the system, resulting in less acidic, mostly near-neutral pH values with low concentrations of most metals except Zn.

Applied Geochemistry↗

USGS2000

Ground penetrating radar imaging of cap rock, caliche and carbonate strata

Field experiments show ground penetrating radar (GPR) can be used to image shallow carbonate stratigraphy effectively in a variety of settings. In south Florida, the position and structure of cap rock cover on limestone can be an important control on surface water flow and vegetation, but larger scale outcrops (tens of meters) of cap rock are sparse. GPR mapping through south Florida prairie, cypress swamp and hardwood hammock resolves variations in thickness and structure of cap rock to ~3 m and holds the potential to test theories for cap rock-vegetation relationships. In other settings, carbonate strata are mapped to test models for the formation of local structural anomalies. A test of GPR imaging capabilities on an arid caliche (calcrete) horizon in southeastern Nevada shows depth penetration to ~2 m with resolution of the base of caliche. GPR profiling also succeeds in resolving more deeply buried (~5 m) limestone discontinuity surfaces that record subaerial exposure in south Florida. (C) 2000 Elsevier Science B.V. All rights reserved.Field experiments show ground penetrating radar (GPR) can be used to image shallow carbonate stratigraphy effectively in a variety of settings. In south Florida, the position and structure of cap rock cover on limestone can be an important control on surface water flow and vegetation, but larger scale outcrops (tens of meters) of cap rock are sparse. GPR mapping through south Florida prairie, cypress swamp and hardwood hammock resolves variations in thickness and structure of cap rock to approx. 3 m and holds the potential to test theories for cap rock-vegetation relationships. In other settings, carbonate strata are mapped to test models for the formation of local structural anomalies. A test of GPR imaging capabilities on an arid caliche (calcrete) horizon in southeastern Nevada shows depth penetration to approx. 2 m with resolution of the base of caliche. GPR profiling also succeeds in resolving more deeply buried (approx. 5 m) limestone discontinuity surfaces that record subaerial exposure in south Florida.

Conference Paper↗