USGS Science⌕ Search

SEARCH · USGS Science

Results for “Natural Hazards and Earth System Sciences”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

1,667 records · Page 20Linked to original sources
USGS2025

Searching for seismic precursors - The Barry Landslide hazard clean up

The Barry Landslide, located in Barry Arm of Prince William Sound, Alaska, poses a major hazard due to its steep, unstable slopes and the potential for a massive landslide-generated tsunami. With an estimated volume of 500–700 million cubic meters, the Barry Landslide could trigger highly destructive waves. In this study, we focus on seismic signals from the Barry Landslide, which are critical for providing timely tsunami warnings. Since the summer of 2020, the region has been instrumented to monitor the landslide, but the seismic record is complicated by the presence of nearby glaciers and frequent regional earthquakes. Among these signals, we analyze a specific class of short-duration, high-frequency seismic events that exhibit strong seasonal variability, increasing in rate from late summer to mid-winter before ceasing abruptly in late winter or early spring. Our analysis suggests that the source of these signals is likely near or beneath Cascade Glacier, adjacent to the landslide, rather than within the landslide mass itself. We apply detection algorithms to construct a time history for this signal type, which we then compare with environmental factors like precipitation, temperature, and slope displacement data from ground-based radar and remote sensing. Correlations indicate that these seismic events may be driven by seasonal hydrological changes, particularly the freeze-up of subglacial water pathways. While these events are not directly linked to landslide motion, they serve as indirect markers of subsurface hydrological conditions that influence slope stability. Our findings highlight the complex interplay between glaciers, groundwater, and landslide dynamics, emphasizing the need for multi-parameter monitoring to assess evolving geohazards in the region.

Alaska↗
USGS2023

3D Dynamic rupture modeling of the 6 February 2023, Kahramanmaraş, Turkey Mw 7.8 and 7.7 earthquake doublet using early observations

The 2023 Turkey earthquake sequence involved unexpected ruptures across numerous fault segments. We present 3D dynamic rupture simulations to illuminate the complex dynamics of the earthquake doublet. Our models are constrained by observations available within days of the sequence and deliver timely, mechanically consistent explanations of the unforeseen rupture paths, diverse rupture speeds, multiple slip episodes, heterogeneous fault offsets, locally strong shaking, and fault system interactions. Our simulations link both earthquakes, matching geodetic and seismic observations and reconciling regional seismotectonics, rupture dynamics, and ground motions of a fault system represented by 10 curved dipping segments and embedded in a heterogeneous stress field. The M w 7.8 earthquake features delayed backward branching from a steeply branching splay fault, not requiring supershear speeds. The asymmetrical dynamics of the distinct, bilateral M w 7.7 earthquake are explained by heterogeneous fault strength, prestress orientation, fracture energy, and static stress changes from the previous earthquake. Our models explain the northward deviation of its eastern rupture and the minimal slip observed on the Sürgü fault. 3D dynamic rupture scenarios can elucidate unexpected observations shortly after major earthquakes, providing timely insights for data‐driven analysis and hazard assessment toward a comprehensive, physically consistent understanding of the mechanics of multifault systems.

The Seismic Record↗
USGS2024

Distinguishing natural sources from anthropogenic events in seismic data

As seismic data are increasingly used to investigate a diverse range of subsurface phenomena beyond regular fast-rupturing earthquakes (Peng and Gomberg, 2010; Beroza and Ide, 2011), it is important to acknowledge that human-generated ground vibrations may be mistaken for naturally generated subsurface processes (Larose et al., 2015; Li et al., 2018). Correct discrimination of natural processes from anthropogenic noise is especially pressing given the trend in seismic detection research toward automated algorithms and machine learning methods (Yoon et al., 2015; Kong et al., 2019;Mousavi and Beroza, 2022) and the growth in seismic data collection in new environments such as urban and industry settings (e.g., Díaz et al.,2017).

Seismological Research Letters↗
USGS2025

A time-space model of graphite mineral systems

Increasing demand for graphite in energy storage systems warrants review of graphite ore genesis in a mineral systems framework. Orogenic graphite encompasses the metamorphic and orogenic mineral systems that produce flake graphite and hydrothermal vein (lump and chip) graphite deposits, respectively. A common feature of orogenic graphite deposits is an association with upper amphibolite- to granulite-facies metasedimentary rocks in continent-continent or continent-island arc collisional orogens. Orogenic flake graphite deposits form primarily through graphitization of organic carbon during regional metamorphism, but strain localization and partial melting of pelitic protoliths are likely important processes for graphite grade and quality enrichment. Orogenic vein graphite deposits precipitate from hydrothermal fluids, possibly derived from metamorphism or anatexis at depth. Decarbonation reactions in mixed calcareous-carbonaceous metasedimentary sequences are the most likely carbon sources for the veins. In contrast, intrusion-related graphite includes magmatic-hydrothermal and metamorphic mineral systems that form primarily in continental arc settings via the interaction of magmas with carbonaceous sedimentary packages. Magmatic-hydrothermal flake graphite deposits are hosted in plutonic and volcanic rocks, and result from the exsolution of CO 2 -CH 4 -rich fluids from melts contaminated by such packages. Contact metamorphism of carbonaceous sedimentary rocks by plutons produces some microcrystalline (amorphous) graphite deposits, including many in China. Compilation of geologic data from known graphite deposits globally suggests that pulses of carbon deposition in the Paleoproterozoic, Mesoproterozoic, and Neoproterozoic provided source carbon material. Subsequent supercontinent orogenesis at ca. 2,100 to 1,700 Ma (Columbia), ca. 1,300 to 1,000 Ma (Rodinia), and ca. 650 to 500 Ma (Gondwana) resulted in the genesis of orogenic flake and vein graphite deposits, where favorable geologic components overlapped with organic ± carbonate carbon-rich strata. Cryogenian deposition of graphite protoliths and Cryogenian – Cambrian metamorphic mineralization account for nearly 75% of all known resources globally and coincide with profound carbon isotope excursions and climate variability, implying a link with the global carbon budget. Comparatively few graphite deposits are associated with Pangea-forming orogens, attributed to less exhumation and/or denudation. High-temperature metasedimentary belts containing organic carbon-rich protoliths are most favorable for hosting orogenic flake graphite deposits, whereas sequences that also contain carbonate protoliths are favorable for orogenic graphite veins. Continent-scale orogenic belts may host both deposit types along with vanadium deposits. Use of a time-space mineral systems framework for graphite deposits can improve exploration models needed to ensure future supply of this critical mineral and provide insights into Earth’s long-term carbon cycle.

Mineralium Deposita↗
USGS2026

Future water constraints on United States lithium mining under climate change

Lithium is necessary for low-carbon technologies that combat climate change, but lithium extraction is water-intensive. Changes in temperature and precipitation arising from climate change are altering water distribution, which could further strain supplies for new mines and industry, farms, and households. Here we explored how climate change, water use, and mining siting could impact lithium mining in the United States. We analyzed whether there would be sufficient water available to support the single existing and 22 proposed U.S. lithium mines at mid-century under four socioeconomic-climate scenarios and five climate models. Though dependent on socioeconomic-climate scenario, climate model, and lithium deposit type, available water supply in most subbasins would likely be unable to support new mines’ water demands, or even non-mining water demands from other sectors. Water scarcity could hinder the ability of the United States to produce enough lithium to meet domestic demand thereby necessitating higher imports.

conterminous United States↗
USGS2026

Keeping pace: Migrating sea lampreys adjust swim speed in response to shifting water velocity to maintain a constant ground speed

Upstream migrating fish must balance energetic costs with environmental and ecological constraints. Theoretical models predict that fish can conserve energy by adjusting swim speed in response to changing water velocity, but detailed field tests of these predictions remain rare. We used fine-scale acoustic telemetry and hydrodynamic modeling to track adult sea lamprey (Petromyzon marinus) migrating through a river and evaluated how movement speeds varied with environmental conditions and individual traits. Swim speed increased with faster water velocities, while ground speed remained constant, supporting the hypothesis that lampreys regulate swim effort to maintain a fixed migration pace. The average ground speed aligned with a predicted optimum of ∼1 body length per second. Both swim and ground speeds declined slightly in deeper water, suggesting a trade-off between movement efficiency and predator avoidance. These findings provide field-based support for a theoretical model of energy optimization and underscore how migratory fish adaptively adjust behavior to local hydrodynamic conditions. Our results highlight the value of using high-resolution tracking and environmental modeling to reveal behavioral tactics that underlie efficient migration strategies.

Michigan↗
USGS2025

Bathymetric and acoustic-backscatter mapping of Lake Sammamish, Washington, during USGS field activity 2021-656-FA

In 2021, scientists from the U.S. Geological Survey (USGS) acquired bathymetric and acoustic-backscatter data within Lake Sammamish, Washington. Mapping was completed to find evidence of past earthquakes such as underwater landslides and is part of a larger USGS project to understand the overall geologic hazards history of the Cascadia Margin region. The survey was conducted using the USGS research vessel Parke Snavely outfitted with an interferometric sidescan-sonar system for swath mapping. Three estimates of bathymetric uncertainty were calculated from the post-processed bathymetric data. This report provides a summary of the mapping mission.

Washington↗
USGS2026

Microplastics undergo fragmentation during pressurized membrane filtration

Low-micrometer microplastics (<10 μm) have been detected in drinking water, driving growing interest in using pressure-driven membrane filtration to remove these particles and ensure drinking water safety. However, little attention is paid to the fate of microplastics concentrated in the filtration byproduct. In this study, using well-defined polystyrene (PS) and poly(methyl methacrylate) microspheres as model particles, we observed microplastic fragmentation during nanofiltration and the subsequent release of smaller fragments. After operating for 3 h at 20 bar, 67.9 ± 8.0% of the PS spheres in the concentrate, based on particles counted in selected fields of view, were transformed into fractured particles. The characteristic Raman band signals of microplastics were significantly weakened after fragmentation, leading to detection challenges. To address this, a data processing algorithm was developed to identify PS fragments as small as 1 μm. Preliminary statistical analysis reveals that within the tested pressure range, operation time has a stronger influence on fragmentation than pressure magnitude alone and that fragmentation is further governed by the intrinsic mechanical properties of the tested model polymers. This work provides direct evidence that pressure-driven membrane processes induce microplastic fragmentation and highlights the environmental risks associated with the discharge of fragmented microplastics into the concentrate.

Environmental Science & Technology Letters↗
USGS2026

Identifying overlap between native fish movements and a possible seasonal Grass Carp deterrent in the Sandusky River, Ohio, USA

Riverine fishes are vulnerable to habitat fragmentation caused by interrupted access to vital habitats. Fragmentation using artificial structures can be used to limit the spread of invasive fishes by inhibiting movement between critical habitats. Thus, tradeoffs exist between maintaining connectivity for native species and restricting movement of invasive fishes. A nonphysical deterrent has been proposed to prevent invasive Grass Carp ( Ctenopharyngodon idella ) from reaching spawning habitats in the Sandusky River, a tributary to Lake Erie, during late spring–summer. However, this timing overlaps with spawning periods of a suite of native fishes. We used acoustic telemetry and ichthyoplankton surveys to examine movement and spawning activity of multiple native species and to assess potential impacts of deterrent operation on reproduction. All species used the proposed deterrent location during the Grass Carp spawning period, and their movements corresponded with larval fish collections, indicating upstream spawning. These findings suggest the deterrent could unintentionally restrict native species’ access to essential habitats. Balancing habitat connectivity and invasive species control will likely depend on species-specific responses and careful timing of deterrent operation.

Ohio↗
USGS2026

Temporal and spatial changes in seismic attenuation associated with inferred fluid migration in the 2016 central Apennines earthquake sequence

Prior work suggests that high‐frequency seismic attenuation acts as a highly sensitive proxy for crustal permeability and fluid mobility in fractured media. We test the hypothesis that the fault system responsible for the 2016–2017 Amatrice–Visso–Norcia–Capitignano sequence acted as an impermeable seal, compartmentalizing pressurized fluids until dynamic rupture triggered widespread fluid diffusion. By tracking across the sequence the spatiotemporal evolution of the S ‐wave anelastic attenuation parameter, we identify large, positive low‐frequency attenuation anomalies emerging within the hanging wall following the Amatrice mainshock and strictly preceding subsequent large ruptures. Conversely, we observe weaker, negative anomalies in the footwall, anticorrelated in time with those of the hanging wall, revealing a massive asymmetry in fluid redistribution and permeability evolution across the fault system. Furthermore, aftershock migration rates reveal distinct linear alignments in a distance‐reduced time space, allowing us to explicitly track and quantify episodes of lateral and upward fluid migration. These physically consistent patterns suggest that stress‐driven fluid diffusion directly weakens adjacent fault patches, dictating the spatiotemporal migration of seismicity. We conclude that near‐real‐time monitoring of seismic attenuation may help detect fluid redistribution in active fault systems and may provide useful information for time‐dependent seismic hazard assessment.

central Apennines↗
USGS2026

Remote sensing enables basin-scale inventories of coal mine methane

Underground coal mines are important global sources of methane, but emission estimates are uncertain. We show that emission estimates for individual mines from aircraft remote-sensing surveys in the United States agree within 40% with direct measurements used for national emission reporting (IPCC Tier 3 estimate). Such direct measurements are unavailable in most countries, which rely on estimated emission factors (EFs) applied to coal-production rates. We find that EFs from IPCC Tier 1 and the Model for Calculating Coal Mine Methane (MC2M) methods overestimate U.S. emissions 3-fold due to incorrect dependence on mine depth. An IPCC Tier 2 method using measured basin-specific mine gas content agrees with direct emission measurements but does not account for gob well emissions and requires gas content data that are generally unavailable. We show that aircraft remote sensing for a small sample of mines can successfully estimate basin-specific EFs for ventilation shafts and gob wells, enabling estimates of basin- and national-scale emissions. We discuss how the method can be applied with satellite remote sensing to quantify coal emissions worldwide.

Alabama, Colorado, Kentucky, New Mexico, Ohio, Pen↗
USGS2024

Geologic input databases for the 2025 Puerto Rico – U.S. Virgin Islands National Seismic Hazard Model update: Crustal faults component

The last National Seismic Hazard Model (NSHM) for Puerto Rico and the U.S. Virgin Islands (PRVI) was published in 2003. In advance of the 2025 PRVI NSHM update, we created three geologic input databases to summarize new onshore and offshore fault source information in the northern Caribbean region between 62°–70° W and 16°–21° N. These databases, of fault sections, fault‐zone polygons, and geologic estimates of fault activity (fault‐slip rate and earthquake recurrence intervals) at specific sites, document updates to fault parameters used in prior seismic hazard models in PRVI. Fault sources were reviewed from published studies since 2003, which document substantial changes to the understanding of fault location, geometry, or activity. New fault section sources were added for features that meet the criteria of (1) length ≥7 km, (2) unequivocal evidence of recurrent tectonic Quaternary activity, and (3) documentation that is publicly available in a peer‐reviewed source. In addition, we revised several broad areal sources, such as the Mona and Anegada extensional zones. The 2003 model included three fault sections and two fault‐zone polygons (areal sources). These databases include 35 fault sections, 6 fault‐zone polygons, and 51 earthquake geology sites. To characterize fault activity rates, slip‐rate bins were assigned based on landscape expression and paleoseismic trench observations for faults without published slip‐rate sites. Additional fault sources were evaluated but not included in these databases due to a lack of published information about fault location, geometry, or recurrent Quaternary activity. The PRVI NSHM 2025 geologic input databases describe crustal faulting; the geometries and coupling of Puerto Rico subduction zone and Muertos Trough models are considered in a separate database. Updates to the fault sections, fault‐zone polygons, and earthquake geology databases can help inform the location and recurrence rate of damaging earthquakes in the PRVI NSHM implementation.

Puerto Rico, U.S. Virgin Islands↗
USGS2026

Subsurface water ice mapping on Mars: A probabilistic approach

Subsurface water ice deposits on Mars are an important resource for potential future human exploration. They are also an indicator of the planet’s past climate. However, the distribution of subsurface water ice in Mars’s midlatitudes is uncertain because spacecraft imagery cannot directly observe subsurface ice in most cases. Various spacecraft remote sensing instruments are sensitive to subsurface water ice, including thermal imaging spectrometers, radar sounders, and neutron spectrometers. Geomorphic analyses of images can also implicate subsurface ice. Building upon the data products from the Mars Subsurface Water Ice Mapping project, we provide a probabilistic framework to jointly interpret existing data and estimate the likelihood of subsurface water ice in the Martian midlatitudes between 60 ∘ S and 60 ∘ N with uncertainty. Broadly, we find that near-surface ice is likely present poleward of ∼45 ∘ in both the northern and southern hemispheres. However, closer to the equator, existing remote sensing data cannot uniquely constrain the presence of subsurface water ice. Our probabilistic results provide a framework for quantifying the abundance of ice on Mars, and our uncertainty estimates allow future analysis and exploration to target regions of high uncertainty.

Planetary Science Journal↗
USGS2026

Beaver dam analogs as nature-based solutions to mitigate snowpack loss in northern New Mexico

Reductions in snow have left many streams in northern New Mexico dry or with very low flows during the summer. Base flow, defined as the contribution of groundwater to streamflow, can sustain streamflow during the summer and during drought conditions. Beaver dam analogs can be used to “slow the flow,” or increase the infiltration of rain-based runoff to replenish shallow groundwater reservoirs and increase base flow and potentially increase summertime streamflow.

New Mexico↗
USGS2024

Insights on gas hydrate formation and growth within an interbedded sand reservoir from well logging at the Qiongdongnan Basin, South China Sea

Although variable well log resolution and its control on saturation estimation has been studied, it has not been directly applied to a specific location to explore the nature of gas hydrate within a sand reservoir. We applied in-situ measurements of resistivities, neutron porosity, and gamma ray at two sites in the Qiongdongnan Basin, South China Sea (QDN-W05–2021 and QDN-W08–2021) to investigate the reservoir parameters of a hydrate-bearing sand reservoir. Our results show that gas hydrate is distributed in 5 zones with a total thickness of 10.7 m and an average saturation of 69% at the QDN-W05–2021 site, while they are distributed in 2 zones with a total thickness of 4.3 m and an average saturation of 49% at the QDN-W08–2021 site. We found that variances in saturations estimated from lateral-extra deep button (RX), phase shift (P40H-P40L), and attenuation (A40H-A40L) resistivities within the laterally mapped continuous sand body were affected by the nature of gas hydrate occurrences. Results indicate gas hydrate forms and accumulates at the center of the sand layer and tends to be less or not present toward the top and base. Integrated with seismic data, the in-situ measurements provide insights in the evolution of a mushroom-shaped, hydrate-gas reservoir system. In the system, free gas is likely horizontally transported from the top-center of the gas chimney to the surrounding areas in the early stage dominated by a warm-gas environment, whereas hydrate forms in the opposite pathway starting from the surrounding areas in the following stage with temperature reducing. Our study suggests that high-resolution in-situ measurements not only are a tool to identify the physical properties, but also can be used to help explain the physical process of hydrate growth and accumulation.

Marine Geology↗
USGS2024

The EnMAP spaceborne imaging spectroscopy mission: Initial scientific results two years after launch

Imaging spectroscopy has been a recognized and established remote sensing technology since the 1980s, mainly using airborne and field-based platforms to identify and quantify key bio- and geo-chemical surface and atmospheric compounds, based on characteristic spectral reflectance features in the visible-near infrared (VNIR) and short-wave infrared (SWIR). Spaceborne missions, a leap in technology, were sparse, starting with the CHRIS/PROBA and EO1/Hyperion missions in the early 2000s, and providing spectroscopy data with limited spectral coverage and/or low data quality in the SWIR. Since 2019, several countries and agencies have successfully launched a number of spaceborne imaging spectroscopy systems into orbit or deployed them on the International Space Station (ISS) such as DESIS, PRISMA, HISUI, GF-5, EnMAP and EMIT. Among these recent missions, the German Environmental Mapping and Analysis Program (EnMAP) stands for its long-term development, sophisticated design with on-board calibration, high data quality requirements, and extensive accompanying science program. EnMAP was launched in April 2022 and, following a successful commissioning phase, started its operational activities in November 2022. The EnMAP mission encompasses global coverage from 80° N to 80° S through on-demand data acquisitions. Data are free and open access with 30 m spatial resolution, a high spectral resolution with a spectral sampling distance of 6.5 nm and 10 nm in the VNIR and SWIR regions respectively, and a high signal-to-noise ratio. In this paper, we aim to present the mission's current status, coverage, science capabilities and performance two years after launch. We show the potential of EnMAP for space-based imaging spectroscopy to operate in various environments, including high and low light levels, dense forests, Antarctic glaciers, and arid agricultural areas. EnMAP enables various applications in fields such as agriculture and forestry, soil compositional, raw materials, and methane mapping, as well as water quality assessment, and snow and ice properties. The results show that EnMAP's performance exceeds the mission requirements, and highlights the significant potential for contribution to scientific exploitation in various geo- and biochemical sciences. EnMAP is also expected to serve as a key tool for the development and testing of data processing algorithms for upcoming global operational missions.

Remote Sensing of Environment↗
USGS2025

Examining the compositional selectivity of hydrocarbon oxidation products using liquid–liquid extraction and solid-phase extraction techniques

The effect of extraction methods on detecting hydrocarbon oxidation products (HOPs) in groundwater remains unclear. HOPs are polar, water-soluble byproducts of petroleum biodegradation. Our previous work showed that liquid–liquid extraction (LLE), a method commonly used in regulatory monitoring, has a significantly lower extraction efficiency for HOPs compared to solid-phase extraction (SPE). In this study, we evaluate the analytical limitations and compositional selectivity of LLE and SPE using groundwater samples from the Bemidji, MN, crude oil spill site. Optical properties were characterized using excitation–emission matrix spectroscopy (EEMs), and a three-component PARAFAC model was validated, showing consistent trends across both extracts and whole water samples. Ultrahigh-resolution mass spectrometry (UHR-MS) revealed that LLE selectively recovered aliphatic-like compounds but underrepresented more polar oxygenated HOPs. In contrast, SPE methods were more effective at isolating highly oxidized compound classes. These differences were consistent across a gradient of contamination. Overall, the LLE was less precise and less representative of polar HOPs, introducing bias in the characterization of HOPs. This study is the first to quantitatively demonstrate the compositional selectivity and analytical bias of LLE versus SPE for HOPs using combined EEM-PARAFAC and UHR-MS techniques, with implications for long-term monitoring and site assessment protocols.

Environmental Science and Technology↗
USGS2025

Comparative assessment of a restored and natural wetland using 13C-DNA SIP reveals a higher potential for methane production in the restored wetland

Wetlands are the largest natural source of methane (CH 4 ), a potent greenhouse gas produced by methanogens. Methanogenesis rates are controlled by environmental factors such as redox potential, temperature, and carbon and electron acceptor availability and are presumably dependent on the composition of the active methanogen community. We collected intact soil cores from a restored and natural freshwater depressional wetland on Maryland’s Delmarva Peninsula (USA) to assess the effects of wetland restoration and redox shifts on microbial processes. Intact soil cores were incubated under either saturated (anoxic) or unsaturated (oxic) conditions and amended with 13 C-acetate for quantitative stable isotope probing (qSIP) of the 16S rRNA gene. Restored wetland cores supported a distinct community of methanogens compared to natural cores, and acetoclastic methanogens putatively identified in the genus Methanosarcina were among the most abundant taxa in restored anoxic and oxic cores. The active microbial communities in the restored wetland cores were also distinguished by the unique presence of facultatively anaerobic bacteria belonging to the orders Firmicutes and Bacteroidetes . In natural wetland incubations, methanogen populations were not among the most abundant taxa, and these communities were instead distinguished by the unique presence of aerobic bacteria in the phyla Acidobacteria , Actinobacteria , and class Alphaproteobacteria . Iron-reducing bacteria, in the genus Geobacter , were active across all redox conditions in both the restored and the natural cores, except the natural oxic–anoxic condition. These findings suggest an overall higher potential for methanogenesis in the restored wetland site compared to the natural wetland site, even when there is evidence of Fe reduction.

Maryland↗