USGS ScienceSearch

SEARCH · USGS Science

Results for “Frontiers for Young Minds”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

1,406 records · Page 20Linked to original sources

Utility of an instantaneous salt dilution method for measuring streamflow in headwater streams

Streamflow records are biased toward large streams and rivers, yet small headwater streams are often the focus of ecological research in response to climate change. Conventional flow measurement instruments such as acoustic Doppler velocimeters (ADVs) do not perform well during low-flow conditions in small streams, truncating the development of rating curves during critical baseflow conditions dominated by groundwater inflow. We revisited an instantaneous solute tracer injection method as an alternative to ADVs based on paired measurements to compare their precision, efficiency, and feasibility within headwater streams across a range of flow conditions. We show that the precision of discharge measurements using salt dilution by slug injection and ADV methods were comparable overall, but salt dilution was more precise during the lowest flows and required less time to implement. Often, headwater streams were at or below the depth threshold where ADV measurements could even be attempted and transects were complicated by coarse bed material and cobbles. We discuss the methodological benefits and limitations of salt dilution by slug injection and conclude that the method could facilitate a proliferation of streamflow observation across headwater stream networks that are highly undersampled compared to larger streams.

Virginia

RioM-1: A new calcite reference material for U-Pb LA-ICP-MS geochronology

Determining absolute ages of carbonate diagenesis, faulting, fossil formation, speleothem growth, carbonate-hosted hydrocarbon deposits, vein mineralisation and hydrothermal alteration has become increasingly accessible through LA-ICP-MS U-Pb dating of calcite, complementing traditional isotope dilution methods still applicable to certain materials (e.g., speleothems via micro-drilling). However, well-calibrated reference materials for LA-ICP-MS calcite geochronology remain scarce. Here, we characterise the Rio Maior calcite, designated ‘RioM-1’, as a potential reference material for U-Pb dating by LA-ICP-MS. Fragments (0.1 to 1 cm 3 ) from a single scalenohedral crystal were analysed by ID-TIMS (U-Pb), LA-ICP-MS (U-Pb and 87 Sr/ 86 Sr), and SIMS (O isotopes). RioM-1 displays high U mass fraction and low, though variable, proportions of common Pb. Combined ID-TIMS analyses from two independent laboratories yielded a Tera-Wasserburg lower intercept date of 63.93 ± 0.11 Ma (2 s , MSWD = 1.3, n = 16). LA-ICP-MS U-Pb data from three independent laboratories are concordant with the TIMS age, producing a pooled date of 64.10 ± 0.12/1.2 Ma (2 s , MSWD = 7.7, n = 708) and an initial 207 Pb/ 206 Pb ratio of 0.85 ± 0.01. Other calcite reference materials, when normalised to RioM-1, yielded dates within uncertainty of their published values. SIMS measurements returned a mean 18 O/ 16 O of 0.002044450 ± 181 (1 s ) and δ 18 O SMOW of 19.57 ± 0.92‰ (1 s ), while LA-ICP-MS strontium isotope measurement yielded a mean 87 Sr/ 86 Sr of 0.708177 ± 9 (2 s ).

Geostandards and Geoanalytical Research

Pathways for potential exposure to onshore oil and gas wastewater: What we need to know to protect human health

Produced water is a chemically complex waste stream generated during oil and gas development. Roughly four trillion liters were generated onshore in the United States in 2021 (ALL Consulting, 2022, https://www.gwpc.org/wp-content/uploads/2021/09/2021_Produced_Water_Volumes.pdf ). Efforts are underway to expand historic uses of produced water to offset freshwater needs in water-stressed regions, avoid induced seismic activity associated with its disposal, and extract commodities. Understanding the potential exposures from current and proposed produced water uses and management practices can help to inform health-protective practices. This review summarizes what is known about potential human exposure to produced water from onshore oil and gas development in the United States. We synthesize 236 publications to create a conceptual model of potential human exposure that illustrates the current state of scientific inquiry and knowledge. Exposure to produced water can occur following its release to the environment through spills or leaks during its handling and management. Exposure can also arise from authorized releases, including permitted discharges to surface water, crop irrigation, and road treatment. Knowledge gaps include understanding the variable composition and toxicity of produced water released to the environment, the performance of treatment methods, migration pathways through the environment that can result in human exposure, and the significance of the exposures for human and ecosystem health. Reducing these uncertainties may help in realizing the benefits of produced water use while simultaneously protecting human health.

Environmental Health Perspectives

Evidence of mineral alteration in a salt marsh subterranean estuary: Implications for carbon and trace element cycling

Subterranean estuaries (STE) in salt marshes are biogeochemically active zones where interactions between terrestrial groundwater and seawater drive complex cycling of carbon and trace elements, influenced by mineral dissolution. These systems, characterized by fine-grained organic-rich peat overlying permeable coastal aquifers, play a crucial role as a blue carbon sink, yet their geochemical dynamics remain poorly understood. We investigated dissolved trace elements, carbon, silica, and radium isotopes in a salt marsh STE (Sage Lot Pond, Waquoit Bay, MA) over seasonal and annual cycles. Our results reveal that groundwater and estuarine water circulation through marsh peat and aquifer sediments leads to enrichments of dissolved organic and inorganic carbon (DOC and DIC), Si, Ba, and Mn, with variable source/sink behavior of Fe and net removal of U. Submarine groundwater discharge dominated Ba fluxes, whereas pore water drainage from marsh peat acted as the main sink for U and source of Si. Fe cycling was variable, with terrestrial Fe largely removed as groundwater passed through the STE, consistent with Fe-sulfide and amorphous phase formation. Radium isotope ratios identified two distinct subsurface flow pathways, influenced by metal-oxide cycling and organic matter breakdown. Si production was decoupled from DIC, suggesting Si originates from mineral alteration, whereas DIC results from both mineral weathering and microbial respiration. Silicate mineral alteration, coupled with marsh pore water drainage, accounts for up to 16% of annual DIC exports (66 g C m −2 y −1 ), highlighting the importance of STEs in coastal carbon and trace element cycling, especially as marshes face environmental change.

Massachusetts

Development of a hydrogeologic visualization model for western Sarpy County, Nebraska

Population in western Sarpy County, Nebraska, has steadily increased over the last several decades and has led to increased groundwater use for domestic purposes. To meet the increase in demand, the Papio-Missouri River Natural Resources District is seeking to use all available sources of groundwater in western Sarpy County. Additionally, elevated groundwater nitrate plus nitrite as nitrogen concentrations were detected, indicating the need to better understand the groundwater quality of the area. Although the general geology of the area is understood, the area does not have detailed information on the extent of the various aquifers, particularly the Dakota aquifer. To characterize these aquifers, the Papio-Missouri River Natural Resources District invested in airborne electromagnetic surveys of the area to better understand the subsurface geology. Although these surveys improved understanding of the groundwater systems in the area, the Papio-Missouri River Natural Resources District wanted to integrate the subsurface information with available water-quality and groundwater-level data. In response, the U.S. Geological Survey, in cooperation with the Papio-Missouri River Natural Resources District, the Nebraska Natural Resources Commission, and the Nebraska Department of Natural Resources, assembled geologic, hydrogeologic and nitrate plus nitrite as nitrogen information for the selected area into a three-dimensional visualization computer software package called GeoScene3D. The completed GeoScene3D project was assembled to provide a visualization of the groundwater systems and associated water-quality results in Sarpy County and to provide the Papio-Missouri River Natural Resources District managers with information that can be used to make more informed groundwater resource-planning decisions in the future. This report details the development of a three-dimensional model created within GeoScene3D to visualize the subsurface, particularly the Dakota Sandstone in western Sarpy County.

Nebraska

Hyperspectral narrowband imaging spectroscopy: A new paradigm for Earth observation

This editorial introduces the Special Issue entitled “Hyperspectral Narrowband Imaging Spectroscopy: A New Paradigm for Earth Observation” in the August 2026 issue of Photogrammetric Engineering & Remote Sensing (PE&RS), the flagship journal of the American Society for Photogrammetry and Remote Sensing (ASPRS). This volume represents the fourth dedicated hyperspectral special issue published in PE&RS, following earlier contributions by Thenkabail et al. (2025, 2024a, 2024b), and continues ASPRS’s commitment to advancing cutting‑edge imaging spectroscopy research and its applications across Earth system science. Remote sensing is undergoing one of the most profound transformations in its history. The emergence of hyperspectral narrowband (HNB) imaging spectroscopy data, capable of acquiring hundreds of contiguous, narrow spectral bands, has shifted the discipline from observing Earth in a handful of broad spectral windows to capturing continuous spectral signatures of the Planet. This transition marks a decisive break from the multispectral paradigm that has dominated satellite remote sensing for nearly five decades, driven by the advent of new orbital imaging spectrometers such as EnMAP, PRISMA, and NASA’s EMIT, and by the forthcoming Surface Biology and Geology (SBG) mission ((Pires Silva et al., 2026; Bourriz et al., 2025; Thenkabail et al., 2025; Chabrillat et al., 2024; Aneece et al., 2024; Dave et al., 2024; Thenkabail et al., 2024a; Thenkabail et al., 2024b; Thenkabail, 2024a; Thenkabail, 2024b; Thompson et al., 2022; Kokaly et al., 2022; Aneece & Thenkabail, 2022; Cawse Nicholson et al., 2021; Guanter et al., 2021; Vangi et al., 2021; Thenkabail et al., 2021). These missions (e.g., Table 1) deliver unprecedented spectral fidelity, improved signal to noise ratios, and global coverage capabilities, enabling a new era of quantitative, spectroscopy based Earth observation. Where multispectral broadbands (MBBs) provide only a few discrete measurements along the electromagnetic spectrum, HNB systems deliver rich, diagnostic information that enables scientists to characterize Earth’s surface with unprecedented biochemical, biophysical, and structural detail (Figure 1a, 1b). The implications for environmental monitoring, agriculture, water resources, and mineral exploration are profound. Several overarching themes emerge: • Spectral fidelity matters. The ability to preserve subtle absorption features is essential for mineral mapping, vegetation trait retrieval, and biochemical modeling. • AI and deep learning are indispensable. From destriping to classification, modern analytics must be scalable, label‑efficient, and capable of exploiting the full spectral–spatial richness of HNB data. • Physics‑based and data‑driven approaches must converge. Radiative transfer models such as PROSAIL, enhanced with localized soil parameterizations, remain foundational for biophysical retrievals and model‑based inference. • Dimensionality reduction and feature extraction are critical. Techniques such as L1‑ISOMAP demonstrate that intelligent manifold learning can unlock the structure of fused, high‑dimensional datasets. • Next‑generation architectures must be interactive and multimodal. ICTNet exemplifies the future of hyperspectral classification: hybrid, synergistic, and capable of modeling both local textures and global spectral dependencies.

Photogrammetric Engineering and Remote Sensing (PE

Quality of groundwater used for domestic supply in the Gilroy-Hollister basin and surrounding areas, California, 2022

More than 2 million Californians rely on groundwater from domestic wells for drinking-water supply. This report summarizes a 2022 California Groundwater Ambient Monitoring and Assessment Priority Basin Project (GAMA-PBP) water-quality survey of 33 domestic and small-system drinking-water supply wells in the Gilroy-Hollister Valley groundwater basin and the surrounding areas, where more than 20,000 residents are estimated to utilize privately owned domestic wells. The study area includes the Llagas subbasin in the north, the North San Benito subbasin in the south, and the surrounding uplands. The study was focused on groundwater resources used for domestic drinking-water supply, which are mostly drawn from shallower parts of aquifer systems rather than those of groundwater resources used for public drinking-water supply in the same area. This assessment characterized the quality of ambient groundwater in the aquifer before filtration or treatment, rather than the quality of drinking water delivered to the tap. To provide context, the measured concentrations of constituents in groundwater were compared to Federal and California State regulatory and non-regulatory benchmarks for drinking-water quality. A grid-based method was used to estimate the areal proportions of groundwater resources used for domestic drinking wells that have water-quality constituents present at high concentrations (above the benchmark), moderate concentrations (between one-half of the benchmark and the benchmark for inorganic constituents, or between one-tenth of the benchmark and the benchmark for organic constituents), and low concentrations (less than one-half or one-tenth the benchmark for inorganic and organic constituents, respectively). This method provides statistically representative results at the study-area scale and permits comparisons to other GAMA-PBP study areas. In the study area, inorganic constituents in groundwater were greater than regulatory benchmarks (U.S. Environmental Protection Agency [EPA] or State of California maximum contaminant levels [MCLs]) for public drinking-water quality in 24 percent of domestic groundwater resources. The inorganic constituents present at concentrations greater than MCLs for drinking water were nitrate (as nitrogen), barium, chromium, and selenium. Total dissolved solids (TDS) or manganese were present at concentrations greater than the secondary maximum contaminant levels (SMCLs) that the State of California uses as aesthetic-based benchmarks in 48 percent of domestic groundwater resources. No volatile organic compounds or pesticide constituents were present at concentrations greater than regulatory benchmarks. Total coliform bacteria and enterococci were detected in 4 percent of domestic groundwater resources. Per- and polyfluoroalkyl substances (PFAS) were detected in 19 percent of domestic groundwater resources, and 10 percent had concentrations greater than recently enacted (April 2024) EPA MCLs. Physical and chemical factors from natural and anthropogenic sources that could affect the groundwater quality were evaluated using results from statistical testing of associations between constituent concentrations and potential explanatory variables. In this study, relevant physical factors include well construction characteristics, groundwater age, site proximity to groundwater recharge or discharge zones, and potential sources of contamination. Relevant chemical factors include the initial chemistry of the recharge water, the mineralogy of the aquifer sediments, and the subsequent shifts in chemistry as biologic and geologic reactions alter groundwater in the subsurface. Nitrate concentrations were correlated to agricultural land use, distance from the boundary of the Gilroy-Hollister Valley groundwater basin, and the proportion of modern (post-1950s) water captured by the well. Denitrification under anoxic redox conditions can mitigate some nitrate derived from fertilizer application. Total dissolved solids primarily were derived from water-rock interactions with soils and aquifer materials in the study area, but there were high concentrations where agricultural practices contributed additional TDS. Mineralogy of aquifer sediments and rocks also affect barium, selenium, boron, and chromium concentrations in the Gilroy-Hollister Valley groundwater basin. PFAS were positively correlated with urban land use and the proportion of modern water captured by the well.

California

Comparative assessment of STIC sensors, streamflow and rain gauges for quantifying river connectivity in intermittent systems

In intermittent stream systems, including those occurring in Texas, USA, the severity of low-flow conditions, duration of seasonal disconnection, and frequency of no-flow events have been amplified by drought. Documentation of these no-flow events is necessary to evaluate ecosystem health. However, many intermittent reaches remain un-gauged given that perennial river sec-tions are often prioritized for gauge placement. Our objectives were to 1) document stream flow using Stream Temperature, Intermittency, and Conductivity (STIC) loggers to determine the frequency and duration of no-flow events in intermittent tributaries of the Colorado River, Texas and 2) compare logger data to publicly available data from streamflow discharge and precipitation gauge networks to understand differences among these data types for drying event characterization. We use these comparisons to summarize benefits and limitations of the application of in-stream data loggers. STIC loggers were deployed at 19 sites, one in each pool and riffle habitat of a stream reach. STIC loggers recorded a measurement of relative conductance every six hours from June 2022 to March 2024, which was used to determine the presence or absence of flow connectivity in a reach. No-flow duration among intermittent reaches varied between 37 and 270 days across tributaries during an ongoing drought in the study area. Overall, logger data was more precise than discharge data for characterizing no-flow events or precipitation data when documenting presence of water in the stream channel due to runoff. Lack of discharge gauges in intermittent tributaries left large sections of stream reaches undocumented and resulted in mischaracterization of flow patterns. Drought severity across the tributaries did not follow longitudinal patterns that would be expected by the climatic precipitation gradient of the study area. More research is needed to determine if factors such as population size affect severity. Likewise, precipitation data did not correlate well with logger water presence data, lacking consideration for groundwater recharge, soil hydrophobicity, and surface compaction. This study shows that to monitor no-flow events, detailed spatial datasets are necessary and that STIC loggers are useful tools that provide data to fill spatial information gaps and facilitate more accurate flow characterization and water presence data in intermittent systems.

Texas

Monazite and xenotime U-Pb geochronology and thermometry of the Blue Ridge and Inner Piedmont of North Carolina: Implications for the thermal-metamorphic evolution of the southern Appalachian metamorphic “core”

The southern Appalachian orogen preserves a complex distribution of metamorphism and deformation varying in timing, magnitude, and spatial extent. These complexities give rise to disparate interpretations for southern Appalachian tectonic evolution, which complicates the testing and interpretation of tectonic models in this system. New monazite (Mnz) and xenotime (Xtm) laser ablation split stream (LASS) analyses alongside Mnz-Xtm thermometry in the orogenic core in the eastern Blue Ridge (EBR), western Inner Piedmont (WIP), and Cat Square terranes (CST) of North Carolina yield new constraints that define distinct pro- and retrograde metamorphic events. The EBR preserves two prograde thermal events: the Taconic (∼470-440 Ma, >660°C) and Neoacadian (∼380-340 Ma, 600–700°C), separated by a period of cooling (exhumation?) and followed by garnet breakdown from 339 to 329 Ma. Evidence of pervasive Neoacadian ductile deformation in the EBR is largely limited to the Brevard fault zone (BFZ), indicating that a major rheological gradient existed across the BFZ during the Neoacadian and early Alleghanian. Southeast of the BFZ, in the WIP and CST, monazite data define a protracted Neoacadian evolution from early mineral growth at ∼405 Ma at ∼450–600°C to >700°C at ∼360 Ma, followed by early Alleghanian retrograde metamorphism and deformation (<345 Ma, 350–500°C). These constraints, together with previously reported thermobarometric data, define a P-T-t evolution for the WIP and CST consistent with Neoacadian crustal flow, while the coeval presence of a thermal-rheological boundary along the BFZ further supports a model of Neoacadian crustal “escape” flow within the orogen.

North Carolina

The spatially adaptable filter for error reduction (SAFER) process: Remote sensing-based LANDFIRE disturbance mapping updates

LANDFIRE (LF) has been producing periodic spatially explicit vegetation change maps (i.e., LF disturbance products) across the entire United States since 1999 at a 30 m spatial resolution. These disturbance products include data products produced by various fire programs, field-mapped vegetation and fuel treatment activity (i.e., events) submissions from various agencies, and disturbances detected by the U.S. Geological Survey Earth Resources Observation and Science (EROS)-based Remote Sensing of Landscape Change (RSLC) process. The RSLC process applies a bi-temporal change detection algorithm to Landsat satellite-based seasonal composites to generate the interim disturbances that are subsequently reviewed by analysts to reduce omission and commission errors before ingestion them into LF’s disturbance products. The latency of the disturbance product is contingent on timely data availability and analyst review. This work describes the development and integration of the Spatially Adaptable Filter for Error Reduction (SAFER) process and other error and latency reduction improvements to the RSLC process. SAFER is a random forest-based supervised classifier and uses predictor variables that are derived from multiple years of pre- and post-disturbance Landsat band observations. Predictor variables include reflectance, indices, and spatial contextual information. Spatial contextual information that is unique to each contiguous disturbance region is parameterized as Z scores using differential observations of the disturbed regions with its undisturbed neighbors. The SAFER process was prototyped for inclusion in the RSLC process over five regions within the conterminous United States (CONUS) and regional model performance, evaluated using 2016 data. Results show that the inclusion of the SAFER process increased the accuracies of the interim disturbance detections and thus has potential to reduce the time needed for analyst review. LF does not track the time taken by each analyst for each tile, and hence, the relative effort saved was parameterized as the percentage of 30 m pixels that are correctly classified in the SAFER outputs to the total number of pixels that are incorrectly classified in the interim disturbance and are presented. The SAFER prototype outputs showed that the relative analysts’ effort saved could be over 95%. The regional model performance evaluation showed that SAFER’s performance depended on the nature of disturbances and availability of cloud-free images relative to the time of disturbances. The accuracy estimates for CONUS were inferred by comparing the 2017 SAFER outputs to the 2017 analyst-reviewed data. As expected, the SAFER outputs had higher accuracies compared to the interim disturbances, and CONUS-wide relative effort saved was over 92%. The regional variation in the accuracies and effort saved are discussed in relation to the vegetation and disturbance type in each region. SAFER is now operationally integrated into the RSLC process, and LANDFIRE is well poised for annual updates, contingent on the availability of data.

Fire

Evaluating mass flow meter measurements from chambers for greenhouse gas emissions from orphan wells and other point sources

This study evaluates the performance of a rigid gas flux chamber equipped with a mass flow meter (MFM) for measuring gas emissions from leaking orphan wells and similar pressure-driven gas point sources. We conducted a series of laboratory and field experiments to evaluate the sensitivity, stability, and dynamic range of an MFM chamber system and found an optimal method for sealing the chamber to the ground to isolate the emission source. From these results, we estimate the effects of different soil gas permeabilities on measurements and identify the uncertainty of environmental processes that can impact measurements. Simulations of an MFM chamber are compared to those of a dynamic flux chamber to contrast the data derived with both methodologies and illustrate the potential for measuring high variability leaks with the MFM chamber. Using a low flow resistance MFM and a chamber well-sealed to the ground, it is possible to measure leaks down to 1.08 x 10 -3 cubic meters per hour (m 3 h −1 ) (refenced to 25°/1 atm), corresponding to 0.77 grams per hour (g h −1 ) methane or 2.11 g h −1 carbon dioxide, with a mean uncertainty of 0.89 % relative standard deviation. Environmental processes such as heated gas inside the chamber from solar gain, wind blowing across the chamber vent, and changing humidity in the chamber, can cause variation in MFM measurements. Over 11 d of continuous monitoring under varying weather conditions, the standard deviation of the environmentally sourced signals was found to be 7.40 x 10 -3 m 3 h −1 (equivalent to or 5.27 g h −1 methane or 14.45 g h −1 carbon dioxide). Strategies to obtain the highest quality data from MFM chambers include burying the edges of the chamber below the surface sufficiently deep to seal the chamber edges against gas flow and soaking the dirt with water to lower the chances of escaping gases, while monitoring the gas flow and adjusting the chamber seal to achieve a maximum flow rate.

Atmospheric Measurement Techniques

Geospatial PDF map of the compilation of GIS data for the mineral industries of select countries in the Indo-Pacific region

Introduction In 2024, the U.S. Geological Survey's (USGS) National Minerals Information Center (NMIC) completed the project titled "Compilation of geospatial data for the mineral industries of select countries in the Indo-Pacific." This project aimed to leverage the expertise and capabilities of the NMIC to collect, synthesize, and interpret geospatial data to inform on the extractive resources of select countries in the Indo-Pacific region (area of study) and expand the NMIC's understanding on the impact of mineral industry of these countries in the global economy. The 19 countries of interest in the Indo-Pacific study area include Bangladesh, Bhutan, Brunei, Burma, Fiji, Malaysia, Mongolia, Nauru, New Caledonia, New Zealand, Papua New Guinea, Philippines, Singapore, Solomon Islands, South Korea (Republic of Korea), Sri Lanka, Taiwan, Timor-Leste, and Vietnam. The primary objective of this effort was to create a fully attributed Geographic Information System (GIS) portraying existing mining infrastructure, resources, and production capacities across the Indo-Pacific study area as well as highlight mineral production and processing sites under development and potential areas of future extractive industry operations and development in the region. The compiled GIS geodatabase with supporting documentation including comprehensive metadata was published as a USGS data release titled "Compilation of Geospatial Data (GIS) for the Mineral Industries of Select Countries in the Indo-Pacific." This georeferenced portable document format (GeoPDF) map sheet presents a new geographic information product containing a partial representation of the GIS data. This GeoPDF map provides a visual comparison of the distribution of mineral industry GIS data, which contributes to a deeper understanding of the intersections and complexities of the extractive industries within the select countries in the Indo-Pacific region.

Open-File Report

Application of acoustical methods for estimating water flow and constituent loads in Perdido Bay, Florida

Water flow and quality data were collected from December 1994 to September 1995 to evaluate variations in discharge, water quality, and chemical fluxes (loads) through Perdido Bay, Florida. Data were collected at a cross section parallel to the U.S. Highway 98 bridge. Discharges measured with an acoustic Doppler current profiler (ADCP) and computed from stage-area and velocity ratings varied roughly between + or - 10,000 cubic feet per second during a typical tidal cycle. Large reversals in flow direction occurred rapidly (less than 1 hour), and complete reversals (resulting in near peak net-upstream or downstream discharges) occurred within a few hours of slack water. Observations of simultaneous upstream and downstream flow (bidirectional flow) were quite common in the ADCP measurements, with opposing directions of flow occurring predominantly in vertical layers. Continuous (every 15 minutes) discharge data were computed for the period from August 18, 1995, to September 28, 1995, and filtered daily mean discharge values were computed for the period from August 19 to September 26, 1995. Data were not computed prior to August 18, 1995, either because of missing data or because the velocity rating was poorly defined (because of insufficient data) for the period prior to landfall of hurricane Erin (August 3, 1995). The results of the study indicate that acoustical techniques can yield useful estimates of continuous (instantaneous) discharge in Perdido Bay. Useful estimates of average daily net flow rates can also be obtained, but the accuracy of these estimates will be limited by small rating shifts that introduce bias into the instantaneous values that are used to compute the net flows. Instantaneous loads of total nitrogen ranged from -180 to 220 grams per second for the samples collected during the study, and instantaneous loads of total phosphorous ranged from -10 to 11 grams per second (negative loads indicate net upstream transport). The chloride concentrations from the water samples collected from Perdido Bay indicated a significant amount of mixing of saltwater and freshwater. Mixing effects could greatly reduce the accuracy of estimates of net loads of nutrients or other substances. The study results indicate that acoustical techniques can yield acceptable estimates of instantaneous loads in Perdido Bay. However, estimates of net loads should be interpreted with great caution and may have unacceptably large errors, especially when saltwater and freshwater concentrations differ greatly.

Florida

The 2023 U.S. 50-state National Seismic Hazard Model: Changes in 2023 compared to 2018 ground motions

We present the 2023 U.S. National Seismic Hazard Model (NSHM) for all 50 states that applies new smoothed seismicity, fault rupture, and ground motion models. New data and methods are introduced in the 2023 earthquake rupture forecast that include: new earthquake catalogs - excluding induced earthquakes, alternative declustering methods, spatially smoothed seismicity distributions, full-catalog scaled rates to account for aftershocks, updated CEUS-WUS attenuation boundary, new magnitude-scaling equations, new geodetic and geologic deformation models, and alternative fault system solutions accounting for a more complete representation of epistemic uncertainty potential for earthquake generation in Alaska, Hawaii, and the conterminous U.S. Improved ground motion models consider new Next Generation Attenuation NGASubduction, modified NGA-East, and adjustments to account for regional biases in ground shaking observations. Semi-empirical and 3D simulations of ground motion are applied to account for shaking at 21 oscillator periods, 2 peak motions, and 8 site conditions. Site effects models are constructed for western U.S. basins (Seattle, Portland/Tualatin, San Francisco, Central Valley of California, Los Angeles, and Salt Lake City) and for sites with deep sedimentary wedges found across the central and eastern U.S. Gulf Coast and Atlantic coastal plain regions. These models result in substantial changes compared to the older NSHMs and are differentiated for the earthquake rupture forecast and ground motion model changes to display sensitivities and impacts.

Conference Paper

Geologic input databases for the 2025 Puerto Rico – U.S. Virgin Islands National Seismic Hazard Model update: Crustal faults component

The last National Seismic Hazard Model (NSHM) for Puerto Rico and the U.S. Virgin Islands (PRVI) was published in 2003. In advance of the 2025 PRVI NSHM update, we created three geologic input databases to summarize new onshore and offshore fault source information in the northern Caribbean region between 62°–70° W and 16°–21° N. These databases, of fault sections, fault‐zone polygons, and geologic estimates of fault activity (fault‐slip rate and earthquake recurrence intervals) at specific sites, document updates to fault parameters used in prior seismic hazard models in PRVI. Fault sources were reviewed from published studies since 2003, which document substantial changes to the understanding of fault location, geometry, or activity. New fault section sources were added for features that meet the criteria of (1) length ≥7 km, (2) unequivocal evidence of recurrent tectonic Quaternary activity, and (3) documentation that is publicly available in a peer‐reviewed source. In addition, we revised several broad areal sources, such as the Mona and Anegada extensional zones. The 2003 model included three fault sections and two fault‐zone polygons (areal sources). These databases include 35 fault sections, 6 fault‐zone polygons, and 51 earthquake geology sites. To characterize fault activity rates, slip‐rate bins were assigned based on landscape expression and paleoseismic trench observations for faults without published slip‐rate sites. Additional fault sources were evaluated but not included in these databases due to a lack of published information about fault location, geometry, or recurrent Quaternary activity. The PRVI NSHM 2025 geologic input databases describe crustal faulting; the geometries and coupling of Puerto Rico subduction zone and Muertos Trough models are considered in a separate database. Updates to the fault sections, fault‐zone polygons, and earthquake geology databases can help inform the location and recurrence rate of damaging earthquakes in the PRVI NSHM implementation.

Puerto Rico, U.S. Virgin Islands

Monitoring changes in Landsat thermal features in urban and non-urban interfaces from 1986 to 2023 in two international urban centers: Implications for climate and global issues

Rapid urbanization is reshaping thermal environments worldwide, with the strongest impacts occurring at the interface between urban and non-urban areas. Impervious surfaces, as key indicators of urban expansion, are critical for monitoring urban growth and assessing surface urban heat island (SUHI) effects. Land use and land cover change (LULCC) provides an essential link between urban dynamics and their environmental and societal consequences. Here, we integrated the U.S. Geological Survey (USGS) Climate Global Issues (CGI) Land Cover Product with Landsat thermal time-series to investigate SUHI evolution in two contrasting metropolitan regions: Wuhan, China, and Brasília, Brazil. Using data spanning 1986–2023, we analyzed the relationships between land cover, Landsat-based land surface temperature (LST), and SUHI intensity, and identified persistent thermal hotspots. Results demonstrate that the land cover data utilized increases the accuracy of impervious surface mapping along urban–rural gradients. Average SUHI intensities were 3.4 °C in Wuhan and 3.3 °C in Brasília, with statistically significant warming trends of 0.04 °C/year and 0.01 °C/year, respectively. Maximum temperature proved to be a robust indicator of SUHI intensification, capturing long-term upward trends. Our findings highlight the important role of urban land cover dynamics in shaping temporal SUHI variability and hotspot emergence. This prototype framework demonstrates the scientific and policy value of combining long-term land cover monitoring information with satellite thermal monitoring to quantify and track SUHI at city scale, supporting sustainable urban planning and climate adaptation strategies.

Remote Sensing

A comparative analysis of OpenET for evaluating evapotranspiration in California almond orchards

The almond industry in California faces water management challenges that are being exacerbated by droughts, climate change, and groundwater sustainability legislation. The Tree-crop Remote sensing of Evapotranspiration eXperiment (T-REX) aims to explore opportunities to improve precision irrigation management for woody perennial cropping systems. Almond orchards in the California Central Valley were equipped with eddy covariance flux measurements to evaluate satellite remote sensing-based evapotranspiration (RSET) models. OpenET provides high-resolution (30-m spatial and daily temporal) RSET data, synthesizing decades of research for practical water management. This study provides an evaluation of OpenET performance at six almond sites covering a large range in soils, age, and variety. It also compares OpenET ensemble evapotranspiration (ET) data with applied irrigation and precipitation records over an additional 148 almond orchards located in the Central Valley of California. Results show OpenET models, including the ensemble ET value, produced reasonable and actionable ET values, with overall coefficient of determination (R 2 ) and mean absolute error values of 0.73- and 0.95-mm d −1 at the daily time step, respectively. However, given the temporal sampling of Landsat (8-day revisit) and the interpolation methods used, the assessed ET models had difficulty in capturing short-term variability in almond ET; for example, the rapid decline in measured ET observed as a response to lack of irrigation preceding and during almond harvest. The study also drew attention to the spatial complexity in scenarios where irrigated orchards are surrounded by hot/dry areas, causing discrepancies between measured and modeled ET values. In comparison with irrigation records, OpenET ensemble ET was capable of quantifying water input (applied irrigation + precipitation) in almond orchards to within 13 % when evaluating monthly data. Initial results presented here reinforce the idea that RSET models, such as in OpenET, are powerful tools, yet their application requires nuanced understanding and careful consideration of local conditions.

California

A global assessment of SAOCOM-1 L-band stripmap data for InSAR characterization of volcanic, tectonic, cryospheric, and anthropogenic deformation

SAOCOM-1 is an L-band (23.5 cm) synthetic aperture radar (SAR) constellation made up of two satellites launched in 2018 and 2020 by Comisión Nacional de Actividades Espaciales (CONAE, Argentina). In this contribution, we present a global summary of interferometric SAR (InSAR) observations of ground deformation with SAOCOM-1 stripmap data for tracking volcanic, tectonic, glacier, and anthropogenic deformation. These examples include: 1) episodes of unrest at volcanoes in the Aleutian Islands, Southern Andes, and Italy, with line-of-sight (LOS) deformation from 4 cm/yr in InSAR time series to ~70 cm in interferograms; 2) dike intrusions in Hawai’i; 3) earthquakes in the Andean fold and thrust belt and the East Anatolian fault; 4) ice flow of the Southern Patagonia icefield; and 5) subsidence due to lithium brine extraction in the Salar de Atacama basin (northern Chile). Comparisons between SAOCOM-1, ALOS-2 SM3, Sentinel-1, and TerraSAR-X/ TanDEM-X/PAZ (TSX/TDX/PAZ) mean velocities from InSAR time series show a 1:1 ± 3% correlation in the LOS velocity, which highlights the high accuracy of SAOCOM-1 data. The minimum deformation that we measured in individual interferograms is 4 ± 0.6 cm. One limitation of SAOCOM-1 is the lack of a global acquisition program, which reduces its global and broader applications. Considering the repeat periods, background observation program, and lack of a controlled orbital tube, the best suited targets for SAOCOM-1 InSAR are two. First, volcanoes that deform with secular rates located in vegetated regions in mid- and high-latitudes, and/or that undergo transient episodes of fast deformation in which C-band coherence is lost quickly. Second, glaciers where coherence can be sustained during the repeat period of eight days.

IEEE Transactions on Geoscience and Remote Sensing