SEARCH · USGS Science

Results for “Complexity”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 361 records · Page 20Linked to original sources

USGS1986

Later Paleozoic and Early Jurassic fossil ages from the McHugh Complex: A section in Geologic studies in Alaska by the U.S. Geological Survey during 1985 Circular 978

Late Mississippian through Early Pennsylvanian and Early Jurassic microfossils were collected from the type locality of the McHugh Complex (Clark, 1973) along the Seward Highway southeast of Anchorage (fig. 36). Radiolarians collected indicate that same of the oceanic rocks in the McHugh Complex are Early Jurassic in age. Conodonts extracted from a conglomerate clast are of Late Mississippian through earliest Pennsylvanian age. The conodont-bearing clast may have been derived from the Strelna Fornation.

Alaska↗

USGS2006

Integrated Science: Providing a More Complete Understanding of Complex Problems

Integration among sciences is critical in order to address some of our most pressing problems. Because of the inherent complexity of natural systems, and the increasing complexity of human demands on them, narrowly-focused approaches are no longer sufficient. USGS Workshop on Enhancing Integrated Science, November 1998. The Mid-Continent Geographic Science Center is actively participating in several integrated science studies that include research partners from the other disciplines of the U.S. Geological Survey (USGS), other Federal and State agencies, universities, and private non-government organizations. The following three examples illustrate the diversity of these studies.

Fact Sheet↗

USGS2020

Development of a method to identify complex wells and assess the accuracy of basin withdrawals in Utah

Power consumption coefficients (PCCs) and dedicated flowmeter records for irrigation wells in three Utah groundwater basins were analyzed to develop a method to better characterize the accuracy of annual groundwater withdrawal estimates. The PCC method has been used by the U.S. Geological Survey in Utah since 1963 as a way to estimate groundwater withdrawal. As a result, most irrigation wells in Utah have historic records consisting of multiple PCCs. Over time, numerous wells have been retrofitted with dedicated flowmeters to more accurately describe groundwater use for irrigation. The combination of historical PCCs and flowmeter data was examined to classify wells as simple, complex, or borderline. The PCCs for each well were statistically analyzed for each period of record to determine the PCC coefficient of variation (CV). Variance, standard deviation, and CV also were calculated for each well, yielding similar results. The CV was selected as the best statistical method for classifying wells. Through field verification and examination of records, CV thresholds were established, allowing wells to be classified as simple, complex, or borderline. This well classification provides information on the uncertainty and best methods for quantifying annual groundwater withdrawals from irrigation wells in a basin. Annual irrigation groundwater withdrawals in Tooele, Parowan, and Goshen Valleys were calculated by using various combinations of historical PCC records and data from dedicated flowmeters. Differences between annual groundwater withdrawal using the most recent measurements, and historic minimum, maximum, mean, and median PCCs were compared. The smallest percent difference between annual groundwater withdrawal calculated using the most recently measured PCCs, which is the current method for calculating withdrawal in most basins, in Tooele and Parowan Valleys, was 7 and 9 percent respectively, using historical median and mean. In Goshen Valley, most wells have dedicated flowmeters, and there is a subset of wells that have 2016 power usage data, historical PCC records, and 2016 reported dedicated flowmeter withdrawal. Using this subset of irrigation wells, the smallest percent different between withdrawal from dedicated flowmeters and withdrawal calculated by using other methods was 5 percent (using withdrawal calculated with historical mean PCCs for each well). Annual groundwater withdrawal calculated using the most recently measured PCCs was 9-percent less than dedicated flowmeter reported withdrawal. So, if withdrawal from dedicated flowmeters is as close to reality as possible, then in the case of Goshen Valley, using historical mean PCCs to calculate withdrawal is closer to reality than using the most recently measured PCCs to calculate withdrawal.

Utah↗

USGS1997

Evidence for hot Mississippi Valley-type brines in the Reelfoot Rift complex, south-central United States, in Late Pennsylvanian-Early Permian

Petrographic and fluid inclusion studies of sparry dolomite cement from Upper Cambrian to Lower Ordovician rocks and conodont thermal-alteration indices provide evidence that hot mississippi valley-type brines were once present in the Reelfoot Rift complex. The cathodoluminescent microstratigraphy of sparry dolomite cement in the Reelfoot Rift resembles that of sparry dolomite cement associated with widespread mississippi valley-type deposition in the Ozark region. If correlative cathodoluminescent zones in the sparry dolomite from the Ozark and Reelfoot Rift regions indicate broadly contemporaneous dolomite deposition, then the results show that the Ozark MVT-type hydrothermal system extended into the Reelfoot region and onto the western flank of the Nashville Dome. Independent evidence supports migration of MVT-type brines into the Ozark region from the Reelfoot Rift complex in late Paleozoic time.

Professional Paper↗

USGS2005

The Togiak-Tikchik complex of southwestern Alaska, a replacement for the Gemuk Group: Stratigraphic nomenclature that has outlived its time

During early exploratory reconnaissance of southwestern Alaska in the 1940s and 1950s, the term "Gemuk Group" was used to name a varied assemblage of sedimentary and volcanic rocks in southwestern Alaska. Throughout the 1950s and early 1960s, the name was broadly applied in the region; yet by the end of the 1960s, it was no longer in use, and later maps assigned the rocks originally in this unit to various informal units and, later, to various terranes. The name "Gemuk Group" is herein abandoned, and the rocks previously assigned to the Gemuk Group, a diverse and structurally complex assemblage, are renamed the "Togiak-Tikchik Complex."

Alaska↗

USGS2014

Occurrence model for magmatic sulfide-rich nickel-copper-(platinum-group element) deposits related to mafic and ultramafic dike-sill complexes

Magmatic sulfide deposits containing nickel (Ni) and copper (Cu), with or without (±) platinum-group elements (PGE), account for approximately 60 percent of the world’s nickel production. Most of the remainder of the Ni production is derived from lateritic deposits, which form by weathering of ultramafic rocks in humid tropical conditions. Magmatic Ni-Cu±PGE sulfide deposits are spatially and genetically related to bodies of mafic and/or ultramafic rocks. The sulfide deposits form when the mantle-derived mafic and/or ultramafic magmas become sulfide-saturated and segregate immiscible sulfide liquid, commonly following interaction with continental crustal rocks. Deposits of magmatic Ni-Cu sulfides occur with mafic and/or ultramafic bodies emplaced in diverse geologic settings. They range in age from Archean to Tertiary, but the largest number of deposits are Archean and Paleoproterozoic. Although deposits occur on most continents, ore deposits (deposits of sufficient size and grade to be economic to mine) are relatively rare; major deposits are present in Russia, China, Australia, Canada, and southern Africa. Nickel-Cu sulfide ore deposits can occur as single or multiple sulfide lenses within mafic and/or ultramafic bodies with clusters of such deposits comprising a district or mining camp. Typically, deposits contain ore grades of between 0.5 and 3 percent Ni and between 0.2 and 2 percent Cu. Tonnages of individual deposits range from a few tens of thousands to tens of millions of metric tons (Mt) bulk ore. Two giant Ni-Cu districts, with ≥10 Mt Ni, dominate world Ni sulfide resources and production. These are the Sudbury district, Ontario, Canada, where sulfide ore deposits are at the lower margins of a meteorite impact-generated igneous complex and contain 19.8 Mt Ni; and the Noril’sk-Talnakh district, Siberia, Russia, where the ore deposits are in subvolcanic mafic intrusions related to flood basalts and contain 23.1 Mt Ni. In the United States, the Duluth Complex in Minnesota, comprised of a group of mafic intrusions related to the 1.1 Ga Midcontinent Rift system, represents a major Ni resource of 8 Mt Ni, but deposits generally exhibit low grades (0.2 percent Ni, 0.66 percent Cu) and remain in the process of being proven economic. The sulfides in magmatic Ni-Cu deposits generally constitute a small volume of the host rock(s) and tend to be concentrated in the lower parts of the mafic and/or ultramafic bodies, often in physical depressions or areas marking changes in the geometry of the footwall topography. In most deposits, the sulfide mineralization can be divided into disseminated, matrix or net, and massive sulfide, depending on a combination of the sulfide content of the rock and the silicate texture. The major Ni-Cu sulfide mineralogy typically consists of an intergrowth of pyrrhotite (Fe 7 S 8 ), pentlandite ([Fe, Ni] 9 S 8 ), and chalcopyrite (FeCuS 2 ). Cobalt, PGE, and gold (Au) are extracted from most magmatic Ni-Cu ores as byproducts, although such elements can have a significant impact on the economics in some deposits, such as the Noril’sk-Talnakh deposits, which produce much of the world’s palladium. In addition, deposits may contain between 1 and 15 percent magnetite associated with the sulfides.

Scientific Investigations Report↗

USGS2015

Groundwater and surface-water interaction and effects of pumping in a complex glacial-sediment aquifer, phase 2, east-central Massachusetts

The U.S. Geological Survey, in cooperation with the Town of Framingham, Massachusetts, has investigated the potential of proposed groundwater withdrawals at the Birch Road well site to affect nearby surface water bodies and wetlands, including Lake Cochituate, the Sudbury River, and the Great Meadows National Wildlife Refuge in east-central Massachusetts. In 2012, the U.S. Geological Survey developed a Phase 1 numerical groundwater model of a complex glacial-sediment aquifer to synthesize hydrogeologic information and simulate potential future pumping scenarios. The model was developed with MODFLOW-NWT, an updated version of a standard USGS numerical groundwater flow modeling program that improves solution of unconfined groundwater flow problems. The groundwater model and investigations of the aquifer improved understanding of groundwater–surface-water interaction and the effects of groundwater withdrawals on surface-water bodies and wetlands in the study area. The initial work also revealed a need for additional information and model refinements to better understand this complex aquifer system. In this second phase of the study, the original groundwater flow model was revised to improve representation of groundwater and surface-water hydrology, stabilize the model, and reduce model error. The model was simplified by reducing the number of layers from 5 to 3 and adding the MODFLOW lake package (LAK) to simulate Lake Cochituate and Pod Meadow Pond and better represent interaction between the lakes and the aquifer. Model revisions improved stability and shortened run times, allowing use of automated parameter estimation software (PEST) to further refine the model hydraulic parameters and reduce simulation errors. Model simulations indicate that under average base-flow conditions, the Birch Road wells have a small effect on flow in the Sudbury River during most months, even at the maximum pumping rate of 4.9 ft 3 /s (3.17 Mgal/d). Maximum percent streamflow depletion in the Sudbury River caused by simulated pumping takes place during simulated drought conditions, when streamflow decreased by as much as 21 percent under maximum continuous pumping. Simulations also indicate that groundwater withdrawals at the Birch Road site could be managed so that adverse streamflow impacts are substantially ameliorated. Under the most ecologically conservative simulated drought conditions, simulated streamflow depletion was reduced from 21 percent to 3 percent by pumping at the maximum rate for 6 months rather than for 12 months. Simulations that return 10 percent of the Birch Road well withdrawals to Pod Meadow Pond indicate a modest reduction in the Sudbury River streamflow depletion and provide a larger percentage increase to streamflow just downstream of the pond. The groundwater model also indicates that well locations can have a large effect on the sustainable pumping rate and so should be chosen carefully. The model provides a tool for evaluating alternative pumping rates and schedules not included in this analysis.

Massachusetts↗

USGS2021

Completion summary for boreholes USGS 148, 148A, and 149 at the Materials and Fuels Complex, Idaho National Laboratory, Idaho

In 2019, the U.S. Geological Survey (USGS), in cooperation with the U.S. Department of Energy, drilled and constructed boreholes USGS 148A and USGS 149 for stratigraphic framework analyses and long-term groundwater monitoring of the eastern Snake River Plain aquifer at the Idaho National Laboratory (INL) in southeastern Idaho. Initially, boreholes USGS 148A and USGS 149 were continuously cored to allow the USGS and INL subcontractor to collect select geophysical and seismic data and evaluate properties of recovered core material. The USGS geophysical data and descriptions of core material are described in this report; however, data collected by the INL contractor, including seismic data, are not included as part of the report. The unsaturated zone at both borehole locations is relatively thick, depth to water was measured at approximately 663.6 feet (ft) below land surface (BLS) in USGS 148A, and at approximately 654.1 ft BLS at USGS 149. On completion of coring and data collection, both boreholes (USGS 148A and USGS 149) were repurposed as monitoring wells. Well USGS 148A was constructed to a depth of 759 ft BLS and instrumented with a dedicated submersible pump and measurement line; well USGS 149 was constructed to a depth of 974 ft BLS and instrumented with a multilevel monitoring system (Westbay TM ). Geophysical data, collected by the USGS, were used to characterize the subsurface geology and aquifer conditions. Natural gamma log measurements were used to assess sediment-layer thickness and location. Neutron and gamma-gamma source logs were used to confirm fractured and vesicular basalt identified for aquifer testing and multilevel monitoring well zone testing. Acoustic televiewer logs, collected for well USGS 149, were used to identify fractures and assess groundwater movement when compared with neutron measurements. Furthermore, gyroscopic deviation measurements were used to measure horizontal and vertical displacement for the constructed boreholes USGS 148A and USGS 149. A single-well aquifer test was done in well USGS 148A during November 6–7, 2019, to provide estimates of transmissivity and hydraulic conductivity. Estimates for transmissivity and hydraulic conductivity were 6.34×10 3 feet squared per day and 3.17 feet per day, respectively. The aquifer test was run overnight (21.3 hours) and measured drawdown was relatively small (0.09 ft) at sustained pumping rates ranging from 15.7 to 16.1 gallons per minute. The transmissivity estimates for well USGS 148A were slightly lower than those determined from previous aquifer tests for wells near the Materials and Fuels Complex, but well within range of other aquifer tests done at the INL. Water-quality samples, collected from well USGS 148A and from four zones in well USGS 149, were analyzed for cations, anions, metals, nutrients, volatile organic compounds, stable isotopes, and radionuclides. Water samples for most of the inorganic constituents showed similar chemistry in USGS 148A and all four zones in USGS 149. Water samples for stable isotopes of oxygen and hydrogen indicated some possible influence of irrigation on the water quality. Nitrate plus nitrite concentrations indicated influence from anthropogenic sources. The volatile organic compound and radiochemical data indicated that wastewater disposal practices at the Materials and Fuels Complex or from drilling had no detectable influence on these wells.

Idaho↗

USGS2020

Simulation modeling of complex climate, wildfire, and vegetation dynamics to address wicked problems in land management

Complex, reciprocal interactions among climate, disturbance, and vegetation dramatically alter spatial landscape patterns and influence ecosystem dynamics. As climate and disturbance regimes shift, historical analogs and past empirical studies may not be entirely appropriate as templates for future management. The need for a better understanding of the potential impacts of climate changes on ecosystems is reaching a new level of urgency, especially in highly perturbed or vulnerable ecological systems. Simulation models are extremely useful tools for guiding management decisions in an era of rapid change, thus providing potential solutions for wicked problems in land management—those that are difficult to solve and inherently resistant to easily definable solutions. We identify three experimental approaches for landscape modeling that address management challenges in the context of uncertain climate futures and complex ecological interactions: (1) an historical comparative approach, (2) a future comparative approach, and (3) threshold detection. We provide examples of each approach from previously published studies of simulated climate, disturbance, and landscape dynamics in forested landscapes of the western United States, modeled with the FireBGCv2 ecosystem process model. Cumulatively, model outcomes indicate that typical land management strategies will likely not be sufficient to counteract the impacts of rapid climate change and altered disturbance regimes that threaten the stability of ecosystems. Without implementation of new, adaptive management strategies, future landscapes are very likely to be different than historical or contemporary ones, with significant and sometimes persistent changes triggered by interactions of climate and wildfire.

Montana, New Mexico, Wyoming↗

USGS2020

Spectral wave-driven bedload transport across a coral reef flat/lagoon complex

Coral reefs are an important source of sediment for reef-lined coasts by helping to maintain beaches while also providing protection in the form of wave energy dissipation. Understanding the mechanisms by which sediment is delivered to the coast as well as better constraining the total volumes generated are critical for projecting future coastal change. A month-long hydrodynamics and sediment transport study on a fringing reef/lagoon complex in Western Australia indicates that lower frequency constituents of wave energy are important to the total bedload transport of sediment across the reef flat and lagoon to the shoreline. The reef flat and the lagoon are characterized by distinctly different transport regimes, resulting in an offset in the timing of bedform migration between the two. Short-term storage of sediment is noted on the reef flat, which is subsequently washed out into the lagoon when offshore wave heights increase and strong currents due to wave breaking at the reef crest develop. This sudden influx of sediment is a significant control on bedform migration rates in the lagoon. Infragravity wave energy on the reef flat and lagoon make an important contribution to the migration of bedforms and resultant bedload transport. Given the complexity of the hydrodynamics of fringing reefs, the transfer of energy to lower frequency bands, as well as accurate estimates of sources and sinks of sediment, must but considered in order to correctly model the transport of sediment from the reef to the coast.

Ningaloo Reef↗

USGS2013

Historical and contemporary geographic data reveal complex spatial and temporal responses of vegetation to climate and land stewardship

Vegetation and land-cover changes are not always directional but follow complex trajectories over space and time, driven by changing anthropogenic and abiotic conditions. We present a multi-observational approach to land-change analysis that addresses the complex geographic and temporal variability of vegetation changes related to climate and land use. Using land-ownership data as a proxy for land-use practices, multitemporal land-cover maps, and repeat photography dating to the late 19th century, we examine changing spatial and temporal distributions of two vegetation types with high conservation value in the southwestern United States: grasslands and riparian vegetation. In contrast to many reported vegetation changes, notably shrub encroachment in desert grasslands, we found an overall increase in grassland area and decline of xeroriparian and riparian vegetation. These observed change patterns were neither temporally directional nor spatially uniform over the landscape. Historical data suggest that long-term vegetation changes coincide with broad climate fluctuations while fine-scale patterns are determined by land-management practices. In some cases, restoration and active management appear to weaken the effects of climate on vegetation; therefore, if land managers in this region act in accord with on-going directional changes, the current drought and associated ecological reorganization may provide an opportunity to achieve desired restoration endpoints.

Land↗

USGS2021

Incorporating the effects of complex soil layering and thickness local variability into distributed landslide susceptibility assessments

Incorporating the influence of soil layering and local variability into the parameterizations of physics-based numerical models for distributed landslide susceptibility assessments remains a challenge. Typical applications employ substantial simplifications including homogeneous soil units and soil-hydraulic properties assigned based only on average textural classifications; the potential impact of these assumptions is usually disregarded. We present a multi-scale approach for parameterizing the distributed Transient Rainfall Infiltration and Grid-Based Regional Slope-Stability (TRIGRS) model that accounts for site-specific spatial variations in both soil thickness and complex layering properties by defining homogeneous soil properties that vary spatially for each model grid cell. These effective properties allow TRIGRS to accurately simulate the timing and distribution of slope failures without any modification of the model structure. We implemented this approach for the carbonate ridge of Sarno Mountains (southern Italy) whose slopes are mantled by complex layered soils of pyroclastic origin. The urbanized foot slopes enveloping these mountains are among the most landslide-prone areas of Italy and have been subjected to repeated occurrences of damaging and deadly rainfall-induced flow-type shallow landslides. At this scope, a primary local-scale application of TRIGRS was calibrated on physics-based rainfall thresholds, previously determined by a coupled VS2D (version 1.3) hydrological modeling and slope stability analysis. Subsequently, by taking into account the spatial distribution of soil thickness and vertical heterogeneity of soil hydrological and mechanical properties, a distributed assessment of landslide hazard was carried out by means of TRIGRS. The combination of these approaches led to the spatial assessment of landslide hazard under different hypothetical rainfall intensities and antecedent hydrological conditions. This approach to parameterizing TRIGRS can be adapted to other spatially variable soil layering and thickness to improve hazard assessments.

Mount Vesuvius↗

USGS2014

Interpreting the paleozoogeography and sea level history of thermally anomalous marine terrace faunas: A case study from the the last interglacial complex of San Clemente Island, California

Marine invertebrate faunas with mixtures of extralimital southern and extralimital northern faunal elements, called thermally anomalous faunas, have been recognized for more than a century in the Quaternary marine terrace record of the Pacific Coast of North America. Although many mechanisms have been proposed to explain this phenomenon, no single explanation seems to be applicable to all localities where thermally anomalous faunas have been observed. Here, we describe one such thermally anomalous fossil fauna that was studied on the second emergent marine terrace at Eel Point on San Clemente Island. The Eel Point terrace complex is a composite feature, consisting of a narrow upper bench (terrace 2a) and a broader lower bench (terrace 2b). Terrace 2b, previously dated from ∼128 ka to ∼114 ka, was thought to date solely to marine isotope stage (MIS) 5.5, representing the peak of the last interglacial period. Nevertheless, the fauna contains an extralimital northern species and several northward-ranging species, as well as an extralimital southern species and several southward-ranging species. Similar faunas with thermally anomalous elements have also been reported from San Nicolas Island, Point Loma (San Diego County), and Cayucos (San Luis Obispo County), California. U-series dating of corals at those localities shows that the thermally anomalous faunas may be the result of mixing of fossils from both the ∼100-ka (cool-water) and the ∼120-ka (warm-water) sea level high stands. Submergence, erosion, and fossil mixing of the ∼120-ka terraces by the ∼100-ka high-sea stand may have been possible due to glacial isostatic adjustment (GIA) effects on North America, which could have resulted in a higher-than-present local sea level stand at ∼100 ka. The terrace elevation spacing on San Clemente Island is very similar to that on San Nicolas Island, and we hypothesize that a similar mixing took place on San Clemente Island. Existing fossil records from older terraces elsewhere in California also show thermally anomalous elements, indicating that the scenario presented here for the last interglacial complex may have applicability to much of the marine Quaternary record for the Pacific Coast.

California↗

USGS2015

Encapsulating model complexity and landscape-scale analyses of state-and-transition simulation models: an application of ecoinformatics and juniper encroachment in sagebrush steppe ecosystems

State-and-transition simulation modeling relies on knowledge of vegetation composition and structure (states) that describe community conditions, mechanistic feedbacks such as fire that can affect vegetation establishment, and ecological processes that drive community conditions as well as the transitions between these states. However, as the need for modeling larger and more complex landscapes increase, a more advanced awareness of computing resources becomes essential. The objectives of this study include identifying challenges of executing state-and-transition simulation models, identifying common bottlenecks of computing resources, developing a workflow and software that enable parallel processing of Monte Carlo simulations, and identifying the advantages and disadvantages of different computing resources. To address these objectives, this study used the ApexRMS® SyncroSim software and embarrassingly parallel tasks of Monte Carlo simulations on a single multicore computer and on distributed computing systems. The results demonstrated that state-and-transition simulation models scale best in distributed computing environments, such as high-throughput and high-performance computing, because these environments disseminate the workloads across many compute nodes, thereby supporting analysis of larger landscapes, higher spatial resolution vegetation products, and more complex models. Using a case study and five different computing environments, the top result (high-throughput computing versus serial computations) indicated an approximate 96.6% decrease of computing time. With a single, multicore compute node (bottom result), the computing time indicated an 81.8% decrease relative to using serial computations. These results provide insight into the tradeoffs of using different computing resources when research necessitates advanced integration of ecoinformatics incorporating large and complicated data inputs and models. - See more at: http://aimspress.com/aimses/ch/reader/view_abstract.aspx?file_no=Environ2015030&flag=1#sthash.p1XKDtF8.dpuf

AIMS Environmental Science↗

USGS2020

The nature and composition of the J-M Reef, Stillwater Complex, Montana, USA

In this contribution, we analyze 30 years of mine development data and quantitatively identify the processes that control the grade and tenor of the mineralized rock. An assay database of more than 60,000 samples was used to examine variations in ore grade and tenor of the sulfide mineralization in the J-M reef horizon of the Stillwater Complex along the strike and down the dip of the deposit in the area of the Stillwater mine. We compare these results with data from the East Boulder mine and whole-rock lithogeochemistry of samples collected along the entire strike length of the complex. We find significant variation in the composition of the reef sulfides in different spatial domains of the Stillwater mine area and between the Stillwater and East Boulder mines. Most of the variation in the grade and tenor can be explained by a variation in the mass of silicate magma with which the sulfide liquid equilibrated (i.e., R factor); however, geochemical and textural evidence suggests that parts of the reef may have experienced significant S loss following initial sulfide melt segregation. Some variability in the reef tenor and grade can be attributed to variable amounts of sulfur loss due to low-temperature hydrothermal fluids and the overestimation or underestimation of metal concentrations in reef assays due to the nugget effect. Furthermore, we address the Pd/Pt ratio of the reef samples and suggest that the lower solubility of Pt in the parental silicate melt may have caused the crystallization and removal of Pt alloys at some point before the melt reached sulfide saturation and Pt could partition into the sulfide liquid. This disparity between the prior evolution of Pt and Pd in the silicate melt resulted in the observed Pd/Pt ratio of ~3.65 across all areas of the reef—a value significantly larger than anticipated for primitive mantle-derived magmas.

Montana↗

USGS1984

PALLADIUM, PLATINUM, RHODIUM, RUTHENIUM AND IRIDIUM IN PERIDOTITES AND CHROMITITES FROM OPHIOLITE COMPLEXES IN NEWFOUNDLAND.

Samples of spinel lherzolite, harzburgite, dunite, and chromitite from the Bay of Islands, Lewis Hills, Table Mountain, Advocate, North Arm Mountain, White Hills Periodite Point Rousse, Great Bend and Betts Cove ophiolite complexes in Newfoundland were analyzed for the platinum-group elements (PGE) Pd, Pt, Rh, Ru and Ir. The ranges of concentration (in ppb) observed for all rocks are: less than 0. 5 to 77 (Pd), less than 1 to 120 (Pt), less than 0. 5 to 20 (Rh), less than 100 to 250 (Ru) and less than 20 to 83 (Ir). Chondrite-normalized PGE ratios suggest differences between rock types and between complexes. Samples of chromitite and dunite show relative enrichment in Ru and Ir and relative depletion in Pt and Pd.

Canadian Mineralogist↗

USGS1995

The Stillwater Complex, Montana: a subvolcanic magma chamber?

Five magma types occur as sills in the footwall of the Stillwater Complex, all of them coeval with the Stillwater Complex, all of them coeval with the Stillwater in age. Two of the magma types have compositions that suggest they are similar to the magmas from which the cumulates of the Stillwater's Basal and Ultramafic series crystallized. Melting experiments show that the crystallization sequence inferred from the Ultramafic series cumulates is matched only in the mixture of the two sill types at 1.5-3 kbar. Thus, the observed stratigraphy of the Basal and Ultramafic series may result from mixing of two distinct magmas rather than fractionation of a single magma. The permissible pressure range of 1.5-3 kbar implies that the depth of the Stillwater magma chamber was similar to that of subvolcanic magma chambers such as that of Kilauea Volcano, which raises the possibility that the Stillwater magma body may also have been a subvolcanic reservoir. -from Author

American Mineralogist↗

USGS1996

Cryptic trace-element alteration of Anorthosite, Stillwater complex, Montana

Evidence of cryptic alteration and correlations among K, Ba, and LREE concentrations indicate that a post-cumulus, low-density aqueous fluid phase significantly modified the trace-element contents of samples from Anorthosite zones I and II of the Stillwater Complex, Montana. Concentrations of Ba, Ca, Co, Cr, Cu, Fe, Hf, K, Li, Mg, Mn, Na, Ni, Sc, Sr, Th, Zn, and the rare-earth elements (REE) were measured in whole rocks and plagioclase separates from five traverses across the two main plagioclase cumulate (anorthosite) zones and the contiguous cumulates of the Stillwater Complex in an attempt to better understand the origin and solidification of the anorthosites. However, nearly the entire observed compositional range for many trace elements can be duplicated at a single locality by discriminating between samples rich in oikocrystic pyroxene and those which are composed almost entirely of plagioclase and show anhedral-granular texture. Plagioclase separates with high trace-element contents were obtained from the pyroxene-poor samples, for which maps of K concentration show plagioclase grains to contain numerous fractures hosting a fine-grained, K-rich phase, presumed to be sericite. Secondary processes in layered intrusions have the potential to cause cryptic disturbance, and the utmost care must be taken to ensure that samples provide information about primary processes. Although plagioclase from Anorthosite zones I and II shows significant compositional variation, there are no systematic changes in the major- or trace-element compositions of plagioclase over as much as 630 m of anorthosite thickness or 18 km of strike length. Plagioclase in the two major anorthosite zones shows little distinction in trace-element concentrations from plagioclase in the cumulates immediately below, between, and above these zones.

Canadian Mineralogist↗