USGS Science⌕ Search

FIND YOUR NEXT DISCOVERY

Results for “Journal of Seismology”

Original records, connected by a shared subject.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

1,229 records · Page 2Linked to original sources
USGS2026

Earthquake catalog for the Fairbanks region of central Alaska, 2014–2024, based on waveform cross-correlation

The Fairbanks region of central Alaska is part of a broad zone of intraplate crustal deformation, situated north of the Denali fault and north of the ongoing collision and flat‐slab subduction of the Yakutat oceanic plateau. Seismicity in the Fairbanks region occurs both in diffuse areas as well as in well‐defined lineaments, such as the left‐lateral Salcha fault, which hosted the 1937 M 8 7.3 earthquake. Starting with the regional seismicity catalog, we perform waveform cross‐correlation, network‐matched filtering, and relative relocation to obtain an enhanced seismicity catalog over the time period 2014–2024. Based on the relocated catalog, we interpret a set of 15 fault segments, including two conjugate faults and two new faults east of the previously documented fault system. Considering the combined seismicity in the Minto and Fairbanks regions, the median depth of seismicity decreases from east (6 km) to west (20 km). Our interpreted faults provide guidance for future tectonic modeling and assessment of seismic hazards in this region.

Alaska↗
USGS2026

Moment magnitude for small earthquakes in the Delaware basin of west Texas and southeast New Mexico, USA

The Delaware Basin region of west Texas and southeast New Mexico has become one of the most prolific regions of seismic activity in the continental United States due to widespread hydraulic fracturing and wastewater disposal injection. In response to the increased number of earthquakes in this region, rapid and accurate characterization of earthquake sources is necessary to understand the evolution of seismic activity and level of seismic hazard associated with these earthquakes. This study re-evaluates earthquake magnitudes, estimating moment magnitude (MW) for small earthquakes in the Delaware Basin using 1) moment-rate spectra derived from S-wave coda envelopes, and 2) a relative magnitude method that relies exclusively on the ratio of waveform amplitudes between highly correlated waveform pairs. The coda-envelope method produces accurate M W estimates for small earthquakes ( M 1.5 – 3) that are consistent with independent, waveform modeled moment magnitudes for events with M W > 3 . Using the relative amplitudes method to extend these M W magnitudes to many other events, we successfully provide relative moment magnitude ( M W,rel ) values for 81% of the Texas Seismological Network catalog in the Delaware Basin region, and 45% of the USGS Induced Seismicity Project’s catalog of events in southeast New Mexico. The adoption and integration of the calibrated M W,rel method with current magnitude estimation methods offers valuable insights into the relationships between local and moment magnitude and will contribute to improved characterization of widespread induced seismicity.

New Mexico, Texas↗
USGS2025

Earthquake stress drop, source spectra from laboratory experiments, and the apparent unsteadiness of frictional slip

Over a range of co-seismic total energy release, high sample rate slip, stress, and slip velocity measurements were made during frictional failure to determine seismic source properties. The near-field measurements were used to estimate stress drops using spectral approaches that are analogous to the standard seismological moment-corner determined Δσ and acceleration amplitude Δσ arms stress drops. Rapid frictional sliding produces slip velocity amplitude spectra that vary with frequency -1 so long as the energy dissipated by friction approaches the total energy release. Under these conditions Δσ and Δσ arms are similar in size. Since these are nearly direct measurements of fault slip velocity and because they produce flat acceleration spectra between the corner and an apparent fmax, friction in these experiments seems to produce dynamic acceleration and deceleration at all resolved frequencies. The physical origin of this unsteady motion is not known exactly but likely reflects rapid dynamic variations in fault strength or applied stress. On the other hand, when the total energy stored prior to failure is artificially made somewhat larger relative to that which can be dissipated by friction the velocity spectra vary with frequency -2 immediately below the corner. At these conditions Δσ and Δσ arms diverge. The excess stored energy is preferentially partitioned into radiated energy upon failure. Collectively the experiments imply that to produce unsteady, white noise accelerations that are observed for natural earthquakes, requires that at least 95% of the energy released does not escape the source region to be radiated to the far-field.

Bulletin of the Seismological Society of America↗
USGS2024

(Re)discovering the seismicity of Antarctica: A new seismic catalog for the southernmost continent

We apply a machine learning (ML) earthquake detection technique on over 21 yr of seismic data from on‐continent temporary and long‐term networks to obtain the most complete catalog of seismicity in Antarctica to date. The new catalog contains 60,006 seismic events within the Antarctic continent for 1 January 2000–1 January 2021, with estimated moment magnitudes (⁠Mw ⁠) between −1.0 and 4.5. Most detected seismicity occurs near Ross Island, large ice shelves, ice streams, ice‐covered volcanoes, or in distinct and isolated areas within the continental interior. The event locations and waveform characteristics indicate volcanic, tectonic, and cryospheric sources. The catalog shows that Antarctica is more seismically active than prior catalogs would indicate, examples include new tectonic events in East Antarctica, seismic events near and around the vicinity of David Glacier, and many thousands of events in the Mount Erebus region. This catalog provides a resource for more specific studies using other detection and analysis methods such as template matching or transfer learning to further discriminate source types and investigate diverse seismogenic processes across the continent.

Seismological Research Letters↗
USGS2026

The U.S. Geological Survey 2025 Puerto Rico and U.S. Virgin Islands time-independent earthquake rupture forecast

We present the 2025 U.S. Geological Survey Puerto Rico and U.S. Virgin Islands (PRVI) time‐independent earthquake rupture forecast (ERF), developed for the 2025 update to the National Seismic Hazard Model (NSHM) for PRVI. The updated ERF improves upon a prior model from 2003, including an expanded fault inventory with slip‐rate estimates, updated seismicity catalogs, and refined subduction zone geometries and deformation models. It applies the fault‐system inversion methodology to solve for rates of ruptures on modeled faults, adapted from the 2023 NSHM (NSHM23) for the western United States, including the first application of the inversion to model rates on a U.S. subduction interface. Off‐fault and intraslab seismicity are constrained by observed seismicity and use updated methods developed for NSHM23. Uncertainties in model components are substantial, and the ERF represents epistemic uncertainties through a comprehensive logic tree consisting of 1.7 billion logic‐tree branches combined across all sources.

Puerto Rico, U.S. Virgin Islands↗
USGS2025

The 1912 Ms 7.2 earthquake in the Denali region of central Alaska

The 2002 M w 7.9 earthquake in central Alaska ruptured 340 km on three faults—Susitna Glacier thrust fault, Denali fault, Totschunda fault—crossing both the Richardson Highway and the Alaska Pipeline. Its occurrence prompted renewed interest in historical large earthquakes that possibly originated on the Denali fault. One of these earthquakes was a M s 7.2 event on July 7, 1912, which we revisit with two approaches: (1) probabilistic relocation of the epicenter using globally recorded arrival times, and (2) compilation and reassessment of shaking intensity reports to estimate a macroseismic epicenter. Our preferred instrumental epicenter is west of the Parks Highway and in agreement with the maximum‐reported shaking, which was from the Parker–Browne expedition of Denali. We also relocated a M s 6.4 aftershock, whose epicenter is 11 km from the mainshock. Candidate faults for the 1912 earthquake include the Denali fault, the McLeod Creek thrust fault, and the Kantishna Hills thrust fault. Future analysis of active faults, paleoseismic results, 1912 instrumental data, and 1912 felt reports may help in interpreting the fault and mechanism of the 1912 earthquake.

Alaska↗
USGS2025

High-precision earthquake catalog for Minto Flats fault zone, central Alaska, reveals complex and conjugate faulting

The Minto Flats fault zone (MFFZ) in central Alaska is a left‐lateral strike‐slip fault system situated between the continental‐scale right‐lateral Denali and Kaltag‐Tintina faults. The MFFZ has the potential to generate magnitude 7 earthquakes, and it hosted a magnitude 6 earthquake in 1995. It has also produced exotic events, such as very‐low‐frequency earthquakes and nucleation signals. We use network‐matched filtering and relative earthquake relocation techniques to derive a detailed catalog of earthquake locations for the MFFZ. The catalog spans from August 2014 to December 2019, a time period including 13 temporary seismic stations in the region. Our results provide the most complete catalog for the MFFZ and include deeper events, clusters of shallow seismicity, and a complex and segmented fault structure not observed in the original regional catalog. We document right‐lateral strike‐slip faulting, conjugate to the main northeast‐striking left‐lateral faults of the MFFZ. Below Nenana basin, the relocated seismicity reveals northwest‐dipping left‐lateral faults, supporting the inference that deep crustal active faulting is associated with recent basin deformation.

Alaska↗
USGS2025

Bayesian ETAS modeling for the Pacific Northwest: Uncovering effects of tectonic regimes, regional differences, and swarms on aftershock parameters

The Pacific Northwest (PNW) of North America has high seismic hazard due to numerous earthquake sources under populated areas. It hosts several tectonic regimes and subregional seismic zones that are hypothesized to have different patterns of earthquake and aftershock occurrence. It is also predisposed to earthquake swarms, which can complicate the statistical modeling of these patterns. We present the first statistical seismicity model of the PNW catalog using the epidemic‐type aftershock sequence (ETAS) framework. We develop a Bayesian inference procedure that provides a stable estimation of both ETAS parameters and their uncertainties for different sets of PNW earthquakes, even those with very sparse catalogs. The Bayesian approach allows us to investigate how parameter estimates change between the intraslab and crustal tectonic regimes, the northern and southern PNW, and when swarms are included and excluded from the catalog. We also utilize our Bayesian framework to calculate parameter estimates under different prior beliefs about PNW seismicity, as well as to propagate catalog measurement errors into ETAS parameter estimates. We discuss the implications of parameter differences across the region for aftershock forecasting for the PNW.

Pacific Northwest↗
USGS2025

Subduction zone earthquake catalog separation tool: Implementation in the USGS 2025 Puerto Rico and U.S. Virgin Islands National Seismic Hazard Model

The U.S. Geological Survey (USGS) periodically releases updates to National Seismic Hazard Model (NSHM) for the United States and its territories leveraging current scientific knowledge and methodologies to guide public policy, building codes, and risk assessments regarding potential ground shaking due to earthquakes that may result in infrastructure damage. In subduction zones, there is a need to separate the earthquake catalog into tectonic regimes to create specific seismicity models for which the most appropriate ground‐motion models are then applied. Here, we describe newly developed methods and software, called CatSep, that classifies subduction zone events into three primary tectonic regimes: crustal, interface, and intraslab. This method incorporates information about the location of the earthquake relative to the subducting slab, the depth of the Mohorovičić discontinuity, and the earthquake’s moment tensor. Applying this method is a first step in the NSHM workflow for regions covering U.S. subduction zones. Results using this subduction zone earthquake catalog separation tool for the 2025 Puerto Rico and U.S. Virgin Islands NSHM earthquake catalog are presented and analyzed.

Puerto Rico, U.S. Virgin Islands↗
USGS2025

Fiber-optic sensing for earthquake hazards research, monitoring and early warning

The use of fiber‐optic sensing systems in seismology has exploded in the past decade. Despite an ever‐growing library of ground‐breaking studies, questions remain about the potential of fiber‐optic sensing technologies as tools for advancing if not revolutionizing earthquake‐hazards‐related research, monitoring, and early warning systems. A working group convened to explore these topics; we comprehensively examined the application of fiber optics in various aspects of earthquake hazards, encompassing earthquake source processes, crustal imaging, data archiving, and technological challenges. There is great potential for fiber‐optic systems to advance earthquake monitoring and understanding, but to fully unlock their capabilities requires continued progress in key areas of research and development, including instrument testing and validation, increased dynamic range for applications focused on larger earthquakes, and continued improvement in subsurface and source imaging methods. A key current stumbling block results from the lack of clear data archiving requirements, and we propose an initial strategy that balances data volume requirements with preserving key data for a broad range of future studies. In addition, we demonstrate the potential for fiber‐optic sensing to impact monitoring efforts by documenting the data completeness in a number of long‐term experiments. Finally, we outline the features of a instrument testing facility that would enable progress toward reliable and standardized distributed acoustic sensing data. Overcoming these current obstacles would facilitate progress in fiber‐optic sensing and unlock its potential application to a broad range of earthquake hazard problems.

California, Oregon, Washington↗
USGS2026

Testing characteristic magnitude distributions in modern PSHA models

The characteristic magnitude distribution hypothesis predicts a higher rate of large earthquakes than a Gutenberg–Richter extrapolation of the small‐earthquake rate would imply. Characteristic magnitude distributions have been commonly applied to faults in probabilistic seismic hazard analysis (PSHA), and in modern models they can emerge from the way short‐term seismicity constraints are combined with long‐term geologic and geodetic constraints. We test the characteristic magnitude distribution hypothesis by comparing the fault‐based magnitude distributions from the 2023 update to the National Seismic Hazard Model (NSHM23) in the Western United States with observed seismicity over the past 93 yr. We find that observed magnitude distributions fall outside the model‐predicted confidence bounds in regions where NSHM23 produces characteristic magnitude distributions: in these regions, the model predicts higher rates of large earthquakes than are observed. An analysis of the earlier California model (Uniform California Earthquake Rupture Forecast, version 3) also reveals discrepancies between the modeled and observed magnitude distributions. In addition, we find that observed magnitude distributions near modeled faults are not significantly different from those in background regions. These results challenge the prevalence of characteristic magnitude distributions in fault‐based seismic hazard models and call for a reassessment of how disparate data sets are integrated in PSHA.

western United States↗
USGS2026

Use of precariously balanced rocks to constrain postglacial earthquake magnitudes in New England, United States

We use the age and fragility of 13 precariously balanced rocks (PBRs) in Massachusetts, New Hampshire, and southwestern Maine to evaluate the estimated probabilistic seismic hazard (PSH) from the U.S. Geological Survey’s National Seismic Hazard Model (NSHM), and also develop a map of maximum postglacial earthquake magnitudes in the region. The PBRs are erratic boulders left behind by the retreat of the Laurentide ice sheet between 13 and 18 ka, and published ice retreat maps are used to estimate their fragility ages. The fragilities and ages of the rocks appear to be consistent with the NSHM, in that the estimated earthquake magnitudes and resulting ground motions that would topple them are only expected on timescales longer than their fragility ages. This result, on the North American passive margin, contrasts with PBR studies at active plate boundaries, where the PBR constraints imply large reductions to estimated PSH. It may be that the PBRs are not old enough in the eastern United States to reveal the same PSH modeling issues as those revealed in the plate boundary settings. The study provides constraints on maximum magnitudes of postglacial earthquakes across much of Massachusetts, New Hampshire, and southwestern Maine, with the constraints limited to the ages of the PBRs.

Maine. Massachusetts, New Hampshire↗
USGS2025

Haunted Summerville: Ghostly lights or earthquake lights?

Among the colorful local lore in the Charleston, South Carolina, area, are a number of ghost stories, shared not only over campfires but also in published books. Among the most well-known of the stories is the tale of the Summerville Light. Local lore holds that a strange light sometimes seen in a remote area is a lantern carried by the ghost of a local woman who once waited hours for her husband, who turned out to have been decapitated earlier that day in a train accident (DePoppe, 2023). Extant sources suggest the ghost stories began to circulate in the 1950s to 1960s. So pervasive was the lore that (Old) Sheep Island Road became known among local residents as Light Road, with a local stretch of road known today as Old Light Road. Reviewing the location where the lights appear as well as the nature of accounts, I suggest that many if not all of the anecdotal observations can be most readily attributed to natural phenomena, including earthquake lights from earthquakes that were too small to be felt. Accounts of lights near Summerville cluster in proximity to the generally accepted epicenter of the 1886 Charleston, South Carolina, earthquake, where foreshocks to the 1886 mainshock were apparently concentrated, and within a few kilometers of three M3.5 – 4.4 earthquakes in 1959 and 1960.

South Carolina↗
USGS2026

Temporal and spatial changes in seismic attenuation associated with inferred fluid migration in the 2016 central Apennines earthquake sequence

Prior work suggests that high‐frequency seismic attenuation acts as a highly sensitive proxy for crustal permeability and fluid mobility in fractured media. We test the hypothesis that the fault system responsible for the 2016–2017 Amatrice–Visso–Norcia–Capitignano sequence acted as an impermeable seal, compartmentalizing pressurized fluids until dynamic rupture triggered widespread fluid diffusion. By tracking across the sequence the spatiotemporal evolution of the S ‐wave anelastic attenuation parameter, we identify large, positive low‐frequency attenuation anomalies emerging within the hanging wall following the Amatrice mainshock and strictly preceding subsequent large ruptures. Conversely, we observe weaker, negative anomalies in the footwall, anticorrelated in time with those of the hanging wall, revealing a massive asymmetry in fluid redistribution and permeability evolution across the fault system. Furthermore, aftershock migration rates reveal distinct linear alignments in a distance‐reduced time space, allowing us to explicitly track and quantify episodes of lateral and upward fluid migration. These physically consistent patterns suggest that stress‐driven fluid diffusion directly weakens adjacent fault patches, dictating the spatiotemporal migration of seismicity. We conclude that near‐real‐time monitoring of seismic attenuation may help detect fluid redistribution in active fault systems and may provide useful information for time‐dependent seismic hazard assessment.

central Apennines↗
USGS2025

Late Pleistocene kinematics of the Great Southern Puerto Rico Fault Zone, Puerto Rico

Several onshore faults in southern Puerto Rico have recently been recognized as Quaternary active. However, the kinematics of these faults, particularly any lateral component, remain largely unconstrained. It is difficult to characterize low strain‐rate faults, partially due to extensive erosional and anthropogenic landscape modification, steep relief, and frequent landsliding, limiting the preservation of geomorphic features that could serve as recorders of fault motion. Here, we constrain the kinematics along sections of the Great Southern Puerto Rico Fault Zone (GSPRFZ) on the southern coastal plain of Puerto Rico. We integrate ∼1‐m‐resolution light detection and ranging (lidar)‐derived topography, historical air photos, and field mapping to identify a series of ∼50–1200‐m‐long fault scarps and lineaments that trend northwest–southeast and extend for ≥25 km across the southern coastal plain. Fault scarps are primarily south facing, cut across topography, and displace Quaternary deposits and landforms. We document multiple offset geomorphic markers, including channel thalwegs and interfluves formed in deposits previously mapped as Quaternary piedmont alluvial plain. We observe both vertical (south‐side‐down) and right‐lateral meter‐scale displacements, which indicate that the GSPRFZ accommodates right‐lateral oblique motion in the late Pleistocene, consistent with northeast motion of the Puerto Rico and the Virgin Islands microplate away from the Hispaniola block.

Puerto Rico↗
USGS2026

Orientation dependence of probabilistic seismic hazard estimates from CyberShake physics-based simulations

Earthquake ground‐motion intensities, such as pseudospectral accelerations (SAs), can vary significantly with horizontal orientation. However, conducting probabilistic seismic hazard analysis (PSHA) for each horizontal orientation is challenging because current ground‐motion models used in PSHA consider only a single horizontal intensity value, usually the median across all orientations, known as RotD50. To address this limitation, we employ physics‐based simulations for PSHA, which contain full waveforms from which ground‐motion intensities can be computed for all horizontal orientations to study directional seismic hazard. We apply our approach to the latest CyberShake study of the Greater Los Angeles metropolitan area, developed by the Statewide California Earthquake Center, finding that seismic hazard at a 2475‐yr return period, a common value used for earthquake‐resistant design, varies significantly with horizontal orientation. For instance, for SAs at 3 s, the maximum seismic hazard across all horizontal orientations is, on average, 15% higher than the median RotD50 hazard, with these differences becoming more pronounced at longer periods. These observed variations can generally be attributed to physical mechanisms that polarize seismic waves, such as the radiation pattern of the earthquake source and the influence of the subsurface structure. These results may have important implications for earthquake engineering applications, particularly for long‐period structures in areas with substantial horizontal variations in seismic hazard.

California↗
USGS2026

High‐resolution surface deformation and slip distribution observations for the 2023 Kahramanmaraş, Türkiye, earthquake sequence help constrain the rupture process

Splay, or branch, faults are a common geometric feature of earthquake surface ruptures and may provide constraints on the rupture behavior of an earthquake. The 2023 M w 7.8 Pazarcık and M w 7.5 Elbistan, Türkiye, earthquakes are examples of ruptures with multiple small splays, and the Pazarcık earthquake nucleated on a splay fault, the Narlı fault, before rupturing bilaterally on the East Anatolian fault (EAF). Here, we present 3‐m‐resolution surface displacement from subpixel correlation of Planet Dove optical images for the entirety of both ruptures with corresponding surface slip distributions. For a 30‐km‐long study region spanning the Narlı‐EAF intersection, we compare surface slip derived from five data sets with different resolutions (on‐the‐ground, WorldView, Planet Dove, Sentinel‐2, and Sentinel‐1) to elucidate complementary information. In addition, we integrate information from the surface expression of faulting with published dynamic rupture simulations and rupture process studies to constrain a rupture evolution for the Pazarcık earthquake that is consistent across data sets. This work highlights the complementary nature of disparate surface slip data sets and the role that high‐resolution surface displacement information, including from fault splays, can play in constraining nonunique rupture models and refining understanding of the earthquake rupture process.

Bulletin of the Seismological Society of America↗
USGS2024

Characterizing directivity in small (M 2.4-5) aftershocks of the Ridgecrest sequence

Directivity, or the focusing of energy along the direction of an earthquake rupture, is a common property of earthquakes of all sizes and can cause increased hazard due to azimuthally dependent ground‐motion amplification. For small earthquakes, the effects of directivity are generally less pronounced due to reduced rupture size, yet the directivity in small events can bias source property estimates and provide important insights into general regional faulting patterns. However, due to observational limitations, directivity is usually only measured and modeled for large events. As such, many studies of small earthquakes either ignore directivity altogether or assume a constant rupture direction for all events in a cluster. In our study, we apply a refined directivity fitting method constrained with two separate methods of source deconvolution to the dataset of aftershocks of the 2019 Ridgecrest earthquakes, which contain a large number of well‐recorded small‐to‐mid sized earthquakes occurring in close proximity to each other. The revealed directivity of 100+ small (M 2.4–5) earthquakes is highly heterogeneous and primarily oblique to and away from the main fault strike, suggesting a complex postseismic stress redistribution. In addition, the energy focusing effect of directivity appears to bias the selection of high‐quality data from stations in the direction of rupture, leading to average stress‐drop increases of 50% if directivity is not accounted for.

California↗