USGS Science⌕ Search

SEARCH · USGS Science

Results for “Journal of Petroleum Geology”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2Linked to original sources
USGS2015

Hydro-bio-geomechanical properties of hydrate-bearing sediments from Nankai Trough

Natural hydrate-bearing sediments from the Nankai Trough, offshore Japan, were studied using the Pressure Core Characterization Tools (PCCTs) to obtain geomechanical, hydrological, electrical, and biological properties under in situ pressure, temperature, and restored effective stress conditions. Measurement results, combined with index-property data and analytical physics-based models, provide unique insight into hydrate-bearing sediments in situ. Tested cores contain some silty-sands, but are predominantly sandy- and clayey-silts. Hydrate saturations S h range from 0.15 to 0.74, with significant concentrations in the silty-sands. Wave velocity and flexible-wall permeameter measurements on never-depressurized pressure-core sediments suggest hydrates in the coarser-grained zones, the silty-sands where S h exceeds 0.4, contribute to soil-skeletal stability and are load-bearing. In the sandy- and clayey-silts, where S h < 0.4, the state of effective stress and stress history are significant factors determining sediment stiffness. Controlled depressurization tests show that hydrate dissociation occurs too quickly to maintain thermodynamic equilibrium, and pressure–temperature conditions track the hydrate stability boundary in pure-water, rather than that in seawater, in spite of both the in situ pore water and the water used to maintain specimen pore pressure prior to dissociation being saline. Hydrate dissociation accompanied with fines migration caused up to 2.4% vertical strain contraction. The first-ever direct shear measurements on never-depressurized pressure-core specimens show hydrate-bearing sediments have higher sediment strength and peak friction angle than post-dissociation sediments, but the residual friction angle remains the same in both cases. Permeability measurements made before and after hydrate dissociation demonstrate that water permeability increases after dissociation, but the gain is limited by the transition from hydrate saturation before dissociation to gas saturation after dissociation. In a proof-of-concept study, sediment microbial communities were successfully extracted and stored under high-pressure, anoxic conditions. Depressurized samples of these extractions were incubated in air, where microbes exhibited temperature-dependent growth rates.

Journal of Marine and Petroleum Geology↗
USGS2019

Permeability anisotropy and relative permeability in sediments from the National Gas Hydrate Program Expedition 02, offshore India

Gas and water permeability through hydrate-bearing sediments essentially governs the economic feasibility of gas production from gas hydrate deposits. Characterizing a reservoir’s permeability can be difficult because even collocated permeability measurements can vary by 4-5 orders of magnitude, due partly to differences between how various testing methods inherently measure permeability in different directions and at different scales. This study uses a customized flow anisotropy cell to investigate geomechanical and hydrological properties of hydrate-bearing sediments focusing on permeability anisotropy (i.e., horizontal, kh, to vertical, kv, permeability ratio) and relative permeability. Two cores recovered during India’s National Gas Hydrate Program Expedition 02 (NGHP-02) are tested in this study. Near in situ effective vertical stress, ~ 2MPa, the permeability anisotropy is approximately kh/kv = 1.86 for the “seal core” (from a fine-grained non-reservoir overburden sedimentary section) and kh/kv = 4.24 for the gas hydrate reservoir score with tetrahydrofuran (THF) hydrate saturation Sh = 0.8. Permeability anisotropy increases exponentially with effective vertical stress, as described by kh/kv = α(σv/MPa)^β, with α = 1.6, β = 0.22 for seal sediment and α = 3, β = 0.5 for THF hydrate-bearing sediment. Results imply the measured permeability from permeameter tests with vertical flow may underestimate the reservoir’s flow performance, which is mainly horizontal (radial) toward a vertical well. Hydrates in sediment increase the gas-entry pressure and residual water saturation, but decrease the water retention curve’s shape factor (m), resulting in a steeper curve. Distributions of available pore space sizes for flow in sediment with and without THF hydrate (Sh = 0.8) follow a log-normal distribution. Hydrate formation decreases the apparent mean pore size from ~10 µm to ~2 µm, without evidently changing the pore size distribution's standard deviation. Gas hydrate dissociation increases effective permeability and relative permeability to gas.

Journal of Marine and Petroleum Geology↗
USGS2019

2D micromodel study of clogging behavior of fine-grained particles associated with gas hydrate production in NGHP-02 gas hydrate reservoir sediments

Fine-grained particles (fines) commonly coexist with coarse-grained sediments that host gas hydrate. These fines can be mobilized by liquid and gas flow during gas hydrate production. Once mobilized, fines can clog pore throats and reduce reservoir permeability. Even where particle sizes are smaller than pore-throat sizes, clogs can form due to clusters of fines. For certain types of fines, particularly swelling clays, cluster sizes depend on pore-fluid chemistry, which changes as pore-fluid freshens during gas hydrate dissociation. Fines can also be concentrated by a moving gas/liquid interface, increasing the chances of pore-throat clogging regardless of fines type. To test the relative significance of these clogging mechanisms, 2D micromodel experiments have been conducted with different pore-throat widths (20, 40, 60 and 100 m), single-phase pore-fluids (deionized water and 2M-sodium-chloride solution), and moving gas/liquid interfaces on specimens from Sites NGHP-02-09 and NGHP-02-16 (NGHP-02: National Gas Hydrate Program Expedition 02) as well as a selection of pure fines (silica silt, mica, calcium carbonate, diatoms, kaolin, and bentonite). Clogging depended on the ratio of particle-to-pore throat size, and also on pore-fluid chemistry because the pore-fluid chemistry changes effectively increased or decreased the fines cluster size relative to the pore-throat width. These interactions can be predicted based on the fines electrical sensitivity (defined by Jang and Santamarina, 2016). The fine-grained sediment component (grain size < 75 m) from the primary gas hydrate reservoir layers at Sites NGHP-02-09 and -16 show clogging via blocking or size exclusion (sieving) due to the large particles. Clogs also formed due to bridging or blocking by clusters of the smaller particles. Clogging generally occurred for pore-water sediment concentrations so low (0.2% by mass or less), that it was difficult to resolve the enhanced clogging in the presence of the gas/liquid meniscus.

Bay of Bengal↗
USGS2019

India National Gas Hydrate Program Expedition 02 summary of scientific results: Evaluation of natural gas hydrate-bearing pressure cores

India’s National Gas Hydrate Program (NGHP) Expedition-02 was conducted in 2015 with the goal of investigating numerous locations that had been determined to be prospective for gas hydrate at high saturation in sand-rich reservoirs. Initial logging while drilling data revealed extensive sand-rich gas hydrate occurrences at multiple drill sites in two broad areas. These sites were further investigated through the acquisition and analyses of pressure cores designed to document 1) gas hydrate occurrence within the reservoirs; 2) the petrophysical nature of the reservoir and associated seals, in their native state as well as during and after the dissociation of gas hydrate; 3) the geomechanical nature of the reservoir and seals; and 4) the geochemical nature of reservoir fluids. The cores were initially evaluated at sea, and select subsamples were transferred for more extensive analyses at specialized laboratories both in Japan and in the United States. The samples encompassed a wide range of gas hydrate saturation (from 0 to 100%) within reservoir sediments ranging from sandy silts to gravels, providing opportunities to extend and refine insights into the nature of gas hydrate reservoirs gained in previous programs. Select findings and implications of this coordinated pressure-core evaluation program are reported in numerous papers within the NGHP-02 Special Thematic Volume and are summarized here with respect to the following issues: the evaluation and mitigation of core disturbance, the assessment of gas hydrate occurrence and saturation, the geomechanics and petrophysics of both reservoirs and “seals” in situ, and the potential dynamic geomechanical and petrophysical behavior of reservoir and seals during production.

Journal of Marine and Petroleum Geology↗
USGS2019

India National Gas Hydrate Program Expedition-02: Operational and technical summary

The India National Gas Hydrate Program is being steered by the government of India's Ministry of Petroleum and Natural Gas (MoPNG) with participation of Directorate General of Hydrocarbons (DGH), Oil and Natural Gas Corporation Limited (ONGC), and the National Oil Companies and Research Institutes of India. The India National Gas Hydrate Program Expedition 01 (NGHP-01) established the presence of gas hydrate in the Krishna Godavari (KG) and Mahanadi Basins and in the offshore area of the Andaman Sea Basin. However, the gas hydrates discovered during NGHP-01 were mainly distributed as fracture-filling material in fine-grained clay-rich sediments. The India National Gas Hydrate Program Expedition 02 (NGHP-02) was carried out with an objective to discover gas hydrate in sand-rich sediment along the eastern offshore margin of India. ONGC planned and executed NGHP-02 on the behalf of the MoPNG. NGHP-02 started on March 3, 2015 and was completed on July 28, 2015 (total 147 days) using the Japanese scientific Drilling Vessel Chikyu (D/V Chikyu). During NGHP-02, 42 holes at 25 sites were drilled, cored, and/or surveyed with downhole logging tools. These sites were located in four areas along the eastern margin of India and formally named Area A (Mahanadi Basin, three sites), Area B (northern part of the KG-Basin, twelve sites), Area C (central part of the KG-Basin, six sites), and Area E (southern part to the KG-Basin, four sites). All 25 sites established during NGHP-02 were first drilled and logged with logging-while-drilling (LWD) tools and an additional 17 holes were then drilled and/or cored with conventional coring tools (HPCS/ESCS) or pressure coring tools (PCTB). Wireline logging was conducted in 10 holes and formation tests using a dual packer Modular Formation Dynamics Tester (MDT) tool were carried out in two holes. The onboard science team used the laboratory facilities on the D/V Chikyu to examine and analyse the physical properties, geochemistry, and sedimentology of all the cores collected during the expedition. Core samples were also analysed in additional post-expedition shore-based studies conducted in numerous domestic and international gas hydrate research laboratories. The NGHP-02 sediment cores were archived at the National Gas Hydrate Core Repository in Mumbai (India), which is associated with the ONGC Gas Hydrate Research and Technology Centre (GHRTC). The necessary data for characterizing the occurrence of gas hydrate, such as interstitial water chlorinities, core-derived gas chemistry, physical and sedimentological properties, thermal images of the recovered cores, pressure core and downhole measured logging data (LWD and/or conventional wireline log data), were obtained from most of the drill sites established during NGHP-02. Almost all the drill sites yielded evidence for the occurrence of gas hydrate; however, the inferred in situ concentration of gas hydrate varied substantially from site to site. For the most part, the interpretation of downhole logging data, core thermal images, interstitial water analyses, and pressure core images from the sites established during NGHP-02 indicate that the occurrence of concentrated gas hydrate is mostly associated with coarser grained (sand-rich) sediments. This paper presents the operational and technical summary of NGHP-02. NGHP-02 started on March 3, 2015 and was completed on July 28, 2015 (total 147 days) using the Japanese scientific Drilling Vessel Chikyu (D/V Chikyu). During NGHP-02, 42 holes at 25 sites were drilled, cored, and/or surveyed with downhole logging tools. These sites were located in four areas along the eastern margin of India and formally named Area A (Mahanadi Basin, three sites), Area B (northern part of the KG-Basin, twelve sites), Area C (central part of the KG-Basin, six sites), and Area E (southern part to the KG-Basin, four sites). All 25 sites established during NGHP-02 were first drilled and logged with logging-while-drilling (LWD) to

Journal of Marine and Petroleum Geology↗
USGS2019

Formation pressure and fluid flow measurements in marine gas hydrate reservoirs, NGHP-02 expedition, offshore India

Open Hole Modular Dynamic Testing (MDT) measurements were conducted in a gas hydrate-bearing sand-rich reservoir offshore India during the National Gas Hydrate Program 02 (NGHP-02) Expedition. The primary goal of this test was to obtain effective reservoir petrophysical properties in the presence of gas hydrates. The test plan included a series of pre-hydrate dissociation flow and build-up (shut-in) tests, and an attempt to dissociate gas hydrate in a sand-rich reservoir by depressurization to collect formation fluid samples and to further characterize in situ gas hydrate stability conditions. Schlumberger’s wireline MDT tool was used in a dual-packer configuration to isolate the formation being tested. This paper presents the results of the open hole MDT measurements that were conducted in Hole NGHP-02-23-C in Krishna-Godavari Basin at a water depth of 2553.5 m. The MDT dual packer test was conducted in 27 cm (10.63 in) diameter open hole section of the borehole within a 1-m interval isolated between two inflatable packers with the midpoint of the test interval at 2853.0 meter below rig floor (mbrf) (271.0 meter below sea floor (mbsf)). This was the first gas hydrate MDT test ever conducted in ultradeep water to characterize a gas hydrate reservoir system. Pre-hydrate dissociation testing was performed with a drawdown period (depressurization) of 20 minutes followed by a build-up (shut-in) of 20 minutes. The measured formation pressure was 4090.7 psia and the formation fluid (i.e., water) mobility was calculated at 1.98 mD/cP. During the second dissociation phase of the same test a maximum pressure drawdown of 840 psia was achieved; however, falling short of the 1120 psia drawdown required for dissociation. During the dissociation test the flow line pressure stabilized at a flowing pressure of 3250 psia which can be attributed to the relatively high mobility of the free water phase in the hydrate-bearing reservoir. Good quality formation pressure and near well bore mobility data was acquired that yielded a “high confidence” reservoir effective radial permeability-thickness product of 0.2 mD.m (or a horizontal effective permeability of 0.1 mD assuming a reservoir thicknees of 1.8 m) using pressure transient analysis (radial flow regime was achieved) despite unstable borehole conditions and complex operations in these shallow unconsolidated sedimentary sections.

Journal of Marine and Petroleum Geology↗
USGS2021

Multiple physical properties of gas hydrate-bearing sediments recovered from Alaska North Slope 2018 Hydrate-01 Stratigraphic Test Well

Knowledge of the petrophysical and geomechanical properties of gas hydrate-bearing sediments is essential for predicting reservoir responses to gas production from gas hydrate reservoirs. In December 2018, Stratigraphic Test Well Hydrate-01 was drilled in the western part of the Prudhoe Bay Unit, Alaska North Slope, as part of the technical planning effort for a future long-term gas hydrate production test. Side-wall pressure coring was conducted to recover gas hydrate-bearing sediments from two reservoir sections named Unit B and Unit D. A total of 34 cores were successfully recovered during five runs of a wireline deployed pressure corer, and a total of 17 cores were preserved for advanced laboratory analysis. The samples were frozen inside the pressure core autoclave by liquid nitrogen while at high pressure before being removed and stored under liquid nitrogen at atmospheric pressure. High-resolution X-ray computed tomography showed the samples were high-quality, with undisturbed lithological layers. The Unit B and D sediments were categorized as sand or sandy silt with high hydrate saturation. Gas compositions suggest the hydrates formed with thermogenic and microbial mixed gases. Permeability tests and triaxial compression tests were conducted on the hydrate-bearing sediments. Low strengthening and high permeability at hydrate saturation S h > 80% were observed. There was a small permeability reduction during the triaxial compression tests owing to porosity loss with increasing effective stress in the highly permeable sandy sediment after hydrate dissociation. The apparent minimal changes in porosity and permeability during the tests were due to the low-clay content and low compressibility of the quartz sand grains in the recovered cores. X-ray powder diffraction and thermal conductivity analysis also suggested a high quartz content for the analyzed samples.

Alaska↗
USGS2022

Diatom influence on the production characteristics of hydrate-bearing sediments: Examples from Ulleung Basin, offshore South Korea

The Ulleung Basin Gas Hydrate field expeditions in 2007 (UBGH1) and 2010 (UBGH2) sought to assess the Basin's gas hydrate resource potential. Coring operations in both expeditions recovered evidence of gas hydrate, primarily as fracture-filling (or vein type) morphologies in mainly silt-sized, fine-grained sediment, but also as pore-occupying hydrate in the coarser-grained layers of interbedded sand and fine-grained systems. A commonality across many of these occurrences is the presence of diatoms in the fine-grained sediment. Here we tested fine-grained sediment (median grain size <12.5 μm) associated with hydrate occurrences at four UBGH2 sites (UBGH2-2-2, UBGH2-3, UBGH2-6 and UBGH2-11) to investigate potential impacts of diatoms on efforts to extract methane from hydrate, or to tap hydrocarbon reservoirs beneath hydrate-bearing sediment. Two key considerations are: the extent to which diatoms control sediment mechanical properties, and the extent to which pore-water freshening, which occurs as gas hydrate breaks down during resource extraction, alters the diatom control on sediment mechanical properties. We conducted experiments to measure sediment index properties, sedimentation behavior and compressibility to address these considerations. We relied on scanning electron microscope (SEM) imagery and X-ray powder diffraction (XRD) to characterize the sediment mineralogy. Our high-level findings are that at the ∼20–45% (by volume) diatom concentrations observed at these UBGH2 sites, sediment compressibility increases with diatom content, but diatoms only appear to increase porosity and permeability at the highest diatom concentration (∼45%). Our measurements suggest in situ compression indices of 0.35–0.55 and permeabilities on the order of 0.01milliDarcies (1 × 10 −17 m 2 ) can be anticipated at these sites. Importantly, these properties are not expected to vary significantly upon pore water freshening that accompanies gas hydrate dissociation during production.

East Sea, Ulleung Basin↗
USGS2023

Characterization of a complex sand-rich gas hydrate reservoir system in the Indian marine continental margin with downhole log and seismic data

Logging-while-drilling (LWD) and coring data were acquired in Areas A, B, C and E during the National Gas Hydrate Program Expedition 02 (NGHP-02). At Sites NGHP-02-16, −17, −20, −23 and −24 of Area B in the Indian Krishna-Godavari Basin, the gas hydrate-bearing sand-rich reservoirs directly in contact with an underlying water-saturated sediment were revealed near the seismic-inferred bottom simulating reflector (BSR) along a large anticlinal structure. Lithofacies analysis of cores show that the lower gas hydrate-bearing reservoir section at these sites is an interbedded unit with thin fine-sand layers alternating with clay-rich layers. We reanalyzed the LWD data including resistivity, compressional-wave and shear-wave acoustic velocities to assess and compare the spatial variation of sand-hosted gas hydrate and possible related free-gas accumulations. The presence of free gas-bearing sediments in direct contact with gas hydrate-bearing sediments was confirmed at Sites NGHP-02-20 and −24 along the northeastern flank of the anticline. The sand-rich reservoirs associated with the Area B anticlinal feature reveal different pore-filling constituents and variable boundary conditions, including gas hydrate/water contacts and gas hydrate/free gas contacts. We infer that the sedimentary depositional history at Sites NGHP-02-20 and −24, may have resulted in an upward shift of the base of gas hydrate stability zone, that could have led to in situ gas hydrate dissociation and the accumulation of free gas and coexistence interval below the log-inferred gas hydrate-bearing reservoir sections. This study demonstrates that reservoir heterogeneity and fluid migration were major factors affecting the distribution of gas hydrate and free gas in the identified sand-rich reservoirs.

Journal of Marine and Petroleum Geology↗
USGS2014

Coal and petroleum resources in the Appalachian basin: distribution, geologic framework, and geochemical character

Fossil fuels from the Appalachian basin region have been major contributors to the Nation&rsquo;s energy supplies over much of the last three centuries. Appalachian coal and petroleum resources are still available in sufficient quantities to contribute significantly to fulfilling the Nation&rsquo;s energy needs. Although both conventional oil and gas continue to be produced in the Appalachian basin, most new wells in the region are drilled in shale reservoirs to produce natural gas. U.S. Geological Survey (USGS) Professional Paper 1708 is a modern, indepth collection of reports, cross sections, and maps that describe the geology of the Appalachian basin and its fossil fuel resources. This publication supplements and updates older USGS regional studies of Appalachian basin coal and petroleum resources. Some chapters are new, and several have been published in outside journals or as other USGS publications. Although this volume is not a comprehensive regional treatment of all notable geologic and fossil fuel localities in the Appalachian basin, the selected study areas and topics presented in the chapters pertain to large segments of the basin and a wide range of stratigraphic intervals. This volume discusses the locations of coal and petroleum accumulations, the stratigraphic and structural framework, and the geochemical characteristics of the coal beds and petroleum in the basin, as well as the results of recent USGS assessments of coal, oil, and gas resources in the basin. Many of the maps and accompanying data supporting the reports in this volume are available from chapter I.1 as downloadable geographic information system (GIS) data files about the characteristics of selected coal beds and oil and gas fields, locations of oil and gas wells, coal production, coal chemistry, total petroleum system (TPS) boundaries, and bedrock geology. Log ASCII Standard (LAS) files for geophysical (gamma ray) wireline well logs are included in other chapters. Professional Paper 1708 is intended primarily for geoscientists in academia, industry, and government who are interested in Appalachian basin geology and its coal and petroleum resources. Other users, however, may find the topics, papers, and digital images valuable for land-use and policy planning. Among the anticipated benefits of the report are improvements in (1) resource assessment estimates and methodology, (2) exploration strategies, (3) basin models, and (4) energy use policies.

Appalachian basin↗
USGS1976

Sedimentary depositional environments of uranium and petroleum host rocks of the Jackson Group, south Texas

Determination of depositional environments in rocks of the Jackson Group of late Eocene age aids in the exploration for uranium and petroleum in south Texas. During deposition of the Jackson Group, conditions were similar to those existing along the modern Gulf Coast of Texas except for a less arid climate and a greater supply of volcanic sediment. Sedimentary depositional environments recognized in both the modern coast and the Jackson rocks, in order from sea toward land, are: shoreface, beach, lagoon and bay, and paludal. Sediment deposited in these environments in places is interbedded with or transected by fluvial sediment. Both uranium and petroleum are found in the shoreface, beach, and fluvial facies. These facies are characterized by permeable well-sorted sandstone, which is commonly overlain and underlain by less permeable mudstone. A typical vertical sequence in ascending order through a unit containing a beach sandstone facies is (1) lagoonal or paludal clay stone and siltstone, (2) crossbedded fine-grained beach sandstone which contains Ophiomorpha burrows and, which, in places, is locally interbedded with lacustrine or lagoonal mudstone, (3) weakly laminated beach sandstone which contains root impressions at the top and Ophiomorpha , and (4) lagoonal or paludal claystone and siltstone. Gulfward, the beach sandstone apparently grades into highly burrowed, generally finer grained, more poorly sorted, less porous shoreface rocks. The beach facies may include barrier island beaches and mainland beaches, some of which were probably cheniers. Beach facies sandstone units extend many miles along the depositional strike, which nearly parallels the present outcrop strike, but extend only a mile or two (2-3 km) normal to the depositional strike into the subsurface. Recognition of the various facies in outcrops and drill holes is necessary for determination of true stratigraphic relations and for aid in exploration for beach and fluvial sandstone favorable for uranium and petroleum accumulations.

Texas↗
USGS1994

Crude-oil spill research project near Bemidji, Minnesota - Bibliography, 1984-1994

The U.S. Geological Survey began a research project at the site of a crude-oil spill near Bemidji, Minnesota in 1983. The project is part of the U.S. Geological Survey's Toxic Substances Hydrology Program. The objectives of research at the site are to obtain an understanding of the mobilization, transport, and fate of petroleum derivatives in the shallow subsurface and to use this understanding to develop predictive models of contaminant behavior. This report presents a bibliography of scientific papers that have been published from 1984 to early 1994. Research results have been published in scientific journals, conference proceedings, U.S. Geological Survey Reports, and academic theses.

Open-File Report↗
USGS2003

Probabilistic assessment methodology for continuous-type petroleum accumulations

The analytic resource assessment method, called ACCESS (Analytic Cell-based Continuous Energy Spreadsheet System), was developed to calculate estimates of petroleum resources for the geologic assessment model, called FORSPAN, in continuous-type petroleum accumulations. The ACCESS method is based upon mathematical equations derived from probability theory in the form of a computer spreadsheet system. ?? 2003 Elsevier B.V. All rights reserved.

International Journal of Coal Geology↗
USGS1973

Problems of underground storage of wastes

Problems of underground storage of waste involve geology in its broadest sense, including hydrology, geochemistry, and geophysics. Wastes may be solid, liquid, or gaseous, and they may be chemically toxic or noxious, esthetically offensive, or radioactive. Some wastes require only temporary containment, whereas others must be isolated for indefinitely long periods. The means and locale for emplacement underground depend upon many governing geological factors, including the physical, chemical, hydrological, and hydraulic properties of the host formation. These must be studied relative to the physical, chemical, and thermal properties of the waste and of potential interactions between the waste and the host formation. Thorough knowledge is essential because lack of it may lead to undesirable or disastrous environmental consequences. Escape of waste may contaminate the surface or near-surface environment; it may destroy the usefulness or accessibility of resources such as ground water, petroleum, and minerals. Effective management of underground waste requires adaptation of current technology and development of new technology.

Journal of Research of the U.S. Geological Survey↗
USGS2020

Fluorescence spectroscopy of ancient sedimentary organic matter via confocal laser scanning microscopy (CLSM)

Fluorescence spectroscopy via confocal laser scanning microscopy (CLSM) was used to analyze ancient sedimentary organic matter, including Tasmanites microfossils in Devonian shale and Gloecapsomorpha prisca ( G. prisca ) in Ordovician kukersite from North American basins. We examined fluorescence emission as a function of excitation laser wavelength, sample orientation, and with respect to location within individual organic entities and in transects across bedded organic matter. Results from spectral scans of the same field of view in Tasmanites with different laser lines showed progressive red-shift in emission maxima with longer excitation wavelengths. This result indicates steady-state Tasmanites fluorescence emission is an overlapping combination of emission from multiple fluorophore functions. Stokes shift decreased with increasing excitation wavelength, further suggesting the presence of multiple fluorophore functions with different S 1 → S 0 transition energies. This observation also indicates that at longer excitation wavelengths, less absorbed light energy is dissipated via collisional transfer than at shorter excitation wavelengths and may suggest fewer polar functions are preferentially absorbing. Confirming earlier results, emission spectra observed from high fluorescence intensity regions (fold apices) in individual Tasmanites are blue-shifted relative to emission from other locations in the same microfossil. We suggest high intensity emission is from photoselective alignment of polarized excitation with the fluorophore absorption and emission transition moment. The blue shift observed in regions of high intensity emission may be due to relative absence or realignment of polar species, e.g., bridging ether or ester functions, although variations in O abundance could not be confirmed with preliminary time-of-flight secondary ion mass spectrometry (TOF-SIMS) analysis. Tasmanites occurring in consolidated sediments are flattened from original spherical morphology and, in optical microscopy, this burial deformation results in generally parallel extinction (strain-influenced) and positive elongation. The deformation also induces fluorescence anisotropy observed as variations in emission wavelength when individual Tasmanites are measured from their long axis parallel to bedding, whereas this effect is absent in bedding-normal view. Transects from G. prisca -rich source layers into adjacent reservoir layers show decrease in fluorescence intensity and spectral red-shift (increase in full-width half-maximum with increasing red portion of the half-width). These results may suggest an increase in fluorescence quenching across the source-to-reservoir transition zone, consistent with an increase in aromaticity following petroleum expulsion and migration. These observations are supported by increasing reflectance values measured across similar micro-scale transects. Our results highlight the applicability of CLSM as a broad and under-utilized approach for the characterization of sedimentary organic matter and are discussed with perspective toward petroleum processes and thermal indices research.

International Journal of Coal Geology↗
USGS1997

U.S. Geological Survey Studies of Energy Resources in Sub-Saharan Africa

The U.S. Government and the American public need access to information on energy resources in sub-Saharan Africa. Sub-Saharan Africa (mostly Nigeria) produces 5 percent of the world's oil, while supplying the United States with 15 percent of our imports (Energy Information Administration). In the next 10 years, sub-Saharan oil and gas will become increasingly more important to the export market. New discoveries in offshore provinces of West Africa ensure a bright future for the region. Projections indicate that increased oil production in sub-Saharan Africa will far outpace the growth of intraregional consumption, providing greater quantities of oil for export (Forman, 1996). Also, West Africa, although a marginal supplier of liquefied natural gas (LNG) today, will become an important LNG source to the international market by the year 2000 (Oil & Gas Journal, 1996). The United States needs up-to-date information about petroleum resources and the energy balance within the region to predict the future role of sub-Saharan Africa as a major oil and gas exporter. The data required to generate the needed information are often disseminated in archives of oil companies and African geologic surveys, or in obscure publications. For these reasons, the U.S. Geological Survey is collecting data on sub-Saharan energy and constructing a regional energy bibliography. The team of geoscientists will assure that this information is available quickly and from a scientifically based, objective view point.

Fact Sheet↗
USGS2001

Report list Arizona's oil, gas potential

This article is a summary of Arizona geological survey circular 29, which addresses the petroleum geology of Arizona, USA. Eight areas have been identified with fair to excellent oil and gas potential, and some Tertiary basins have evidence of source or reservoir rocks. The following are considered here: production history, lands status and services, regulation and permitting, petroleum geology, hydrocarbon indications, and areas with hydrocarbon potential and their petroleum geology and characteristics. The full report contains detailed figures of each of these basin areas, a descriptive tabulation of seeps and petroliferous rocks and extensive references.

Arizona↗