USGS Science⌕ Search

SEARCH · USGS Science

Results for “Journal of Glaciology”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2Linked to original sources
USGS2017

Deformation of the Batestown till of the Lake Michigan lobe, Laurentide ice sheet

Deep, pervasive shear deformation of the bed to high strains (>100) may have been primarily responsible for flow and sediment transport of the Lake Michigan lobe of the Laurentide ice sheet. To test this hypothesis, we sampled at 0.2 m increments a basal till from one advance of the lobe (Batestown till) along vertical profiles and measured fabrics due to both anisotropy of magnetic susceptibility and sand-grain preferred orientation. Unlike past fabric studies, interpretations were guided by results of laboratory experiments in which this till was deformed in simple shear to high strains. Fabric strengths indicate that more than half of the till sampled has a <5% probability of having been sheared to moderate strains (7-30). Secular changes in fabric azimuth over the thickness of the till, probably due to changing ice-flow direction as the lobe receded, indicate that the bed accreted with time and that the depth of deformation of the bed did not exceed a few decimeters. Orientations of principal magnetic susceptibilities show that the state of strain was commonly complex, deviating from bed-parallel simple shear. Deformation is inferred to have been focused in shallow, temporally variable patches during till deposition from ice.

Journal of Glaciology↗
USGS2017

Late-Holocene climate evolution at the WAIS Divide site, West Antarctica: Bubble number-density estimates

A surface cooling of ∼1.7°C occurred over the ∼two millennia prior to ∼1700 CE at the West Antarctic ice sheet (WAIS) Divide site, based on trends in observed bubble number-density of samples from the WDC06A ice core, and on an independently constructed accumulation-rate history using annual-layer dating corrected for density variations and thinning from ice flow. Density increase and grain growth in polar firn are both controlled by temperature and accumulation rate, and the integrated effects are recorded in the number-density of bubbles as the firn changes to ice. Number-density is conserved in bubbly ice following pore close-off, allowing reconstruction of either paleotemperature or paleo-accumulation rate if the other is known. A quantitative late-Holocene paleoclimate reconstruction is presented for West Antarctica using data obtained from the WAIS Divide WDC06A ice core and a steady-state bubble number-density model. The resultant temperature history agrees closely with independent reconstructions based on stable-isotopic ratios of ice. The ∼1.7°C cooling trend observed is consistent with a decrease in Antarctic summer duration from changing orbital obliquity, although it remains possible that elevation change at the site contributed part of the signal. Accumulation rate and temperature dropped together, broadly consistent with control by saturation vapor pressure.

Journal of Glaciology↗
USGS2017

Evaluation of remote-sensing techniques to measure decadal-scale changes of Hofsjokull ice cap, Iceland

Dynamic surficial changes and changes in the position of the firn line and the areal extent of Hofsjökull ice cap, Iceland, were studied through analysis of a time series (1973–98) of synthetic-aperture radar (SAR) and Landsat data. A digital elevation model of Hofsjökull, which was constructed using SAR interferometry, was used to plot the SAR backscatter coefficient (σ°) vs elevation and air temperature along transects across the ice cap. Seasonal and daily σ° patterns are caused by freezing or thawing of the ice-cap surface, and abrupt changes in σ° are noted when the air temperature ranges from ∼−5° to 0°C. Late-summer 1997 σ° (SAR) and reflectance (Landsat) boundaries agree and appear to be coincident with the firn line and a SAR σ° boundary that can be seen in the January 1998 SAR image. In January 1994 through 1998, the elevation of this σ° boundary on the ice capwas quite stable, ranging from 1000 to 1300 m, while the equilibrium-line altitude, as measured on the ground, varied considerably. Thus the equilibrium line may be obscured by firn from previous years. Techniques are established to measure long-term changes in the elevation of the firn line and changes in the position of the ice margin.

Hofsjokull ice cap↗
USGS2017

Distributed shear of subglacial till due to Coulomb slip

In most models of the flow of glaciers on till beds, it has been assumed that till behaves as a viscoplastic fluid, despite contradictory evidence from laboratory studies. In accord with this assumption, displacement profiles measured in subglacial till have been fitted with viscoplastic models by estimating the stress distribution. Here we present a model that illustrates how observed displacement profiles can result from till deformation resisted solely by Coulomb friction. Motion in the till bed is assumed to be driven by brief departures from static equilibrium caused by fluctuations in effective normal stress. These fluctuations result from chains of particles that support intergranular forces that are higher than average and that form and fail at various depths in the bed during shearing. Newton’s second law is used to calculate displacements along slip planes and the depth to which deformation extends in the bed. Consequent displacement profiles are convex upward, similar to those measured by Boulton and colleagues at Breidamerkurjökull, Iceland. The model results, when considered together with the long-term and widespread empirical support for Coulomb models in soils engineering, indicate that efforts to fit viscoplastic flow models to till displacement profiles may be misguided.

Journal of Glaciology↗
USGS2017

Discharge of debris from ice at the margin of the Greenland ice sheet

Sediment production at a terrestrial section of the ice-sheet margin in West Greenland is dominated by debris released through the basal ice layer. The debris flux through the basal ice at the margin is estimated to be 12–45 m 3 m −1 a −1 . This is three orders of magnitude higher than that previously reported for East Antarctica, an order of magnitude higher than sites reported from in Norway, Iceland and Switzerland, but an order of magnitude lower than values previously reported from tidewater glaciers in Alaska and other high-rate environments such as surging glaciers. At our site, only negligible amounts of debris are released through englacial, supraglacial or subglacial sediment transfer. Glaciofluvial sediment production is highly localized, and long sections of the ice-sheet margin receive no sediment from glaciofluvial sources. These findings differ from those of studies at more temperate glacial settings where glaciofluvial routes are dominant and basal ice contributes only a minor percentage of the debris released at the margin. These data on debris flux through the terrestrial margin of an outlet glacier contribute to our limited knowledge of debris production from the Greenland ice sheet.

Journal of Glaciology↗
USGS2017

Fabric and texture at Siple Dome, Antarctica

Preferred c-axis orientations are present in the firn at Siple Dome, West Antarctica, and recrystallization begins as shallow as 200 m depth in ice below –20°C, based on digital analysis of c-axis fabrics, grain-sizes and other characteristics of 52 vertical thin sections prepared in the field from the kilometer-long Siple Dome ice core. The shallowest section analyzed, from 22 m, shows clustering of c axes toward the vertical. By 200 m depth, girdle fabric and other features of recrystallized ice are evident in layers (or regions), separated by layers (regions) of typically finer-grained ice lacking evidence of recrystallization. Ice from about 700–780m depth, which was deposited during the last ice age, is especially fine-grained, with strongly vertical c axes, but deeper ice shows much larger crystals and strong evidence of recrystallization. Azimuthal asymmetry of some c -axis fabrics, trends in grain-size, and other indicators reveal additional information on processes and history of ice flow at Siple Dome.

Journal of Glaciology↗
USGS2017

Precursory seismicity associated with frequent, large ice avalanches on Iliamna Volcano, Alaska, USA

Since 1994, at least six major (volume>106 m 3 ) ice and rock avalanches have occurred on Iliamna volcano, Alaska, USA. Each of the avalanches was preceded by up to 2 hours of seismicity believed to represent the initial stages of failure. Each seismic sequence begins with a series of repeating earthquakes thought to represent slip on an ice-rock interface, or between layers of ice. This stage is followed by a prolonged period of continuous ground-shaking that reflects constant slip accommodated by deformation at the glacier base. Finally the glacier fails in a large avalanche. Some of the events appear to have entrained large amounts of rock, while others comprise mostly snow and ice. Several avalanches initiated from the same source region, suggesting that this part of the volcano is particularly susceptible to failure, possibly due to the presence of nearby fumaroles. Although thermal conditions at the time of failure are not well constrained, it is likely that geothermal energy causes melting at the glacier base, promoting slip and culminating in failure. The frequent nature and predictable failure sequence of Iliamna avalanches makes the volcano an excellent laboratory for the study of ice avalanches. The prolonged nature of the seismic signal suggests that warning may one day be given for similar events occurring in populated regions.

Alaska↗
USGS2017

Helicopter electromagnetic data map ice thickness at Mount Adams and Mount Baker, Washington, USA

Ice-thickness measurements critical for flood and mudflow hazard studies are very sparse on Cascade Range (North America) volcanoes. Helicopter electromagnetic (HEM) data collected to detect hydrothermal alteration are used to determine ice thickness over portions of Mount Baker and Mount Adams volcanoes. A laterally continuous inversion method provides good estimates of ice <100 m thick over water-saturated and altered regions where the resistivity of the basement is <200 Ωm. For areas with ice overlying fresh, resistive rocks with small resistivity contrasts between ice and rock, ice thickness is not well resolved. The ice thicknesses derived from HEM data are consistent with the previous drillhole data from Mount Adams and radar data from both volcanoes, with mean thicknesses of 57 m for Mount Adams and 68 m for Mount Baker. The thickest ice on Mount Baker rests on the gentle lower slopes whereas the thickest ice at Mount Adams lies on the flat summit. Ice volume calculations suggest that Mount Baker contains ∽710 × 10 6 m 3 of ice in the HEM survey area, with a crude estimate of ∽1800 × 10 6 m 3 for the entire volcano. Ice volume on Mount Adams is 65 × 10 6 m 3 in parts of the HEM survey area and ∽200 × 10 6 m 3 overall.

Washington↗
USGS2017

Shallow repeating seismic events under an alpine glacier at Mount Rainier, Washington, USA

We observed several swarms of repeating low-frequency (1&ndash;5 Hz) seismic events during a 3 week period in May&ndash;June 2010, near the summit of Mount Rainier, Washington, USA, that likely were a result of stick&ndash;slip motion at the base of alpine glaciers. The dominant set of repeating events ('multiplets') featured >4000 individual events and did not exhibit daytime variations in recurrence interval or amplitude. Volcanoes and glaciers around the world are known to produce seismic signals with great variability in both frequency content and size. The low-frequency character and periodic recurrence of the Mount Rainier multiplets mimic long-period seismicity often seen at volcanoes, particularly during periods of unrest. However, their near-surface location, lack of common spectral peaks across the recording network, rapid attenuation of amplitudes with distance, and temporal correlation with weather systems all indicate that ice-related source mechanisms are the most likely explanation. We interpret the low-frequency character of these multiplets to be the result of trapping of seismic energy under glacial ice as it propagates through the highly heterogeneous and attenuating volcanic material. The Mount Rainier multiplet sequences underscore the difficulties in differentiating low-frequency signals due to glacial processes from those caused by volcanic processes on glacier-clad volcanoes.

Washington↗
USGS2017

Physical properties of the WAIS Divide ice core

The WAIS (West Antarctic Ice Sheet) Divide deep ice core was recently completed to a total depth of 3405 m, ending ∼50 m above the bed. Investigation of the visual stratigraphy and grain characteristics indicates that the ice column at the drilling location is undisturbed by any large-scale overturning or discontinuity. The climate record developed from this core is therefore likely to be continuous and robust. Measured grain-growth rates, recrystallization characteristics, and grain-size response at climate transitions fit within current understanding. Significant impurity control on grain size is indicated from correlation analysis between impurity loading and grain size. Bubble-number densities and bubble sizes and shapes are presented through the full extent of the bubbly ice. Where bubble elongation is observed, the direction of elongation is preferentially parallel to the trace of the basal (0001) plane. Preferred crystallographic orientation of grains is present in the shallowest samples measured, and increases with depth, progressing to a vertical-girdle pattern that tightens to a vertical single-maximum fabric. This single-maximum fabric switches into multiple maxima as the grain size increases rapidly in the deepest, warmest ice. A strong dependence of the fabric on the impurity-mediated grain size is apparent in the deepest samples.

Journal of Glaciology↗
USGS2017

A new high-precision borehole-temperature logging system used at GISP2, Greenland, and Taylor Dome, Antarctica

We describe a high-precision (0.1–1.0 mK) borehole-temperature (BT) logging system developed at the United States Geological Survey (USGS) for use in remote polar regions. We discuss calibration, operational and data-processing procedures, and present an analysis of the measurement errors. The system is modular to facilitate calibration procedures and field repairs. By interchanging logging cables and temperature sensors, measurements can be made in either shallow air-filled boreholes or liquid-filled holes up to 7 km deep. Data can be acquired in either incremental or continuous-logging modes. The precision of data collected by the new logging system is high enough to detect and quantify various thermal effects at the milli-Kelvin level. To illustrate this capability, we present sample data from the 3 km deep borehole at GISP2, Greenland, and from a 130 m deep air-filled hole at Taylor Dome, Antarctica. The precision of the processed GISP2 continuous temperature logs is 0.25–0.34 mK, while the accuracy is estimated to be 4.5 mK. The effects of fluid convection and the dissipation of the thermal disturbance caused by drilling the borehole are clearly visible in the data. The precision of the incremental Taylor Dome measurements varies from 0.11 to 0.32 mK. depending on the wind strength during the experiments. With this precision, we found that temperature fluctuations and multi-hour trends in the BT measurements correlate well with atmospheric-pressure changes.

Journal of Glaciology↗
USGS2017

Channelized subglacial drainage over a deformable bed

We develop theoretically a description of a possible subglacial drainage mechanism for glaciers and ice sheets moving over saturated, deformable till. The model is based on the plausible assumption that flow of water in a thin film at the ice-till interface is unstable to the formation of a channelized drainage system, and is restricted to the case in which meltwater cannot escape through the till to an underlying aquifer. In describing the physics of such channelized drainage, we have generalized and extended Rothlisberger's model of channels cut into basal ice to include "canals' cut into the till, paying particular attention to the role of sediment properties and the mechanics of sediment transport. We show that sediment-floored Rothlisberger (R) channels can exist for high effective pressures, and wide, shallow, ice-roofed canals cut into the till for low effective pressures. Canals should form a distributed, non-arborescent system, unlike R channels. Geologic evidence derived from land forms and deposits left by the Pleistocene ice sheets in North America and Europe is consistent with predictions of the model. -from Authors

Journal of Glaciology↗
USGS2017

Thin sectioning and surface replication of ice at low temperature.

We have developed a new technique for making thin sections and surface replicas of ice at temperatures well below 273 K. Cyanoacrylate glue forms a strong bond with ice and glass at 245 K, eliminating the need to fix the sample to the thin-section slide by melting and freezing. Surface replicas are made by melting away sample material once the glue has cured. Glue replicas are permanent and highly detailed, making them suitable for microstructural and textural studies at room temperature . Thin sections glued with cyanoacrylate glue are comparable in quality to melted-on sections. The ability to make thin sections without melting sample material is important in textural and microstructural studies of ice deformed at low temperatures because of annealing effects we have observed during conventional section making.

Journal of Glaciology↗
USGS2017

Calculation of a velocity distribution from particle trajectory end-points.

The longitudinal component of the velocity of a particle at or near a glacier surface is considered, its position as a function of time being termed its trajectory. Functional relationships are derived for obtaining the trajectory from the spatial distribution of velocity and for obtaining the velocity distribution from the trajectory. It is established that the trajectory end-points impose only an integral condition on the velocity distribution, and that no individual point on the velocity distribution can be determined if only the end-points are known. An example is given of a deduced velocity distribution that is consistent with (although not uniquely determined by) the end-points of several trajectories on the lower reach of Columbia Glacier, Alaska. It is shown that constructing a velocity distribution by assigning the average trajectory velocity to the trajectory mid-point can be subject to errors of several per cent for velocity distribution features that are typical of actual glaciers. The error in this method is determined, and closed-form expressions for the trajectory are obtained, for linear velocity distributions and for two classes of second-degree distributions. The class of functions is identified to which the velocity distribution must belong for this error to be zero.

Journal of Glaciology↗
USGS2017

Systems for measuring thickness of temperate and polar ice from the ground or from the air.

Equipment has been designed and tested for ground-based and airborne sounding of temperate glaciers. The transmitter is a free-running pulse generator that uses avalanche-mode transistor breakdown to create high-voltage pulses. The transmit and receive antennas are resistively loaded dipoles; for the airborne system, a twin-lead transmit element and a three-layer coaxial receive element are used on the inboard end of the respective antennas. The sounders are broadband systems; oscilloscopes are used for receivers. The oscilloscope trace is recorded photographically in the ground-based systems. A sampling oscilloscope is used in the airborne system—the sampling process strobes the waveform to audio frequencies so that it can be recorded on magnetic tape. Echoes have been obtained from ice depths of 550 m using the airborne system and about 1 000 m using the ground-based system.

Journal of Glaciology↗
USGS2017

Evidence for a former large ice sheet in the Orville Coast- Ronne Ice Shelf area, Antarctica.

The Orville Coast area of the Antarctic Peninsula was extensively glacierized in the past. Striations, polished rock surfaces, and erratics on nunatak summits indicate that this area was covered by a broad regional ice sheet whose grounded ice margin was on the continental shelf, in the present-day Ronne Ice Shelf area. If the glacial history of Antarctica has been controlled by eustatic sea-level changes, the destruction of this ice sheet would have been contemporaneous with that of the Ross Sea ice sheet due to the world-wide rise of eustatic sea-level at the end of the Wisconsin glaciation.

Journal of Glaciology↗
USGS2017

Geometry and flow conditions of subglacial water at South Cascade Glacier, Washington State, USA; an analysis of tracer injections

Tracers were injected into South Cascade Glacier to determine the flow condition and geometry of the subglacial water system. Results indicate that two distinct drainage basins on the glacier feed the two main streams flowing from the glacier. In the largest basin, two parallel drainage networks exist, one englacial and the other subglacial. The englacial system is an arboresecent network of conduits, whereas the subglacial system is a distributed flow system. Both systems connect to a single subglacial conduit which appears as a stream at the glacier’s terminus. The comparison between the travel time of the tracers and stream discharge indicated that the single conduit was pressurized in July and partly filled in August and September.

Journal of Glaciology↗