USGS Science⌕ Search

SEARCH · USGS Science

Results for “Applied Energy”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2Linked to original sources
USGS2012

Dynamic rupture modeling with laboratory-derived constitutive relations

A laboratory-derived state variable friction constitutive relation is used in the numerical simulation of the dynamic growth of an in-plane or mode II shear crack. According to this formulation, originally presented by J. H. Dieterich, frictional resistance varies with the logarithm of the slip rate and with the logarithm of the frictional state variable as identified by A. L. Ruina. Under conditions of steady sliding, the state variable is proportional to (slip rate) −1 . Following suddenly introduced increases in slip rate, the rate and state dependencies combine to produce behavior which resembles slip weakening. When rupture nucleation is artificially forced at fixed rupture velocity, rupture models calculated with the state variable friction in a uniformly distributed initial stress field closely resemble earlier rupture models calculated with a slip weakening fault constitutive relation. Additional rupture models are calculated in which rupture nucleation is achieved naturally, with numerical simulations of the quasi-static response of the fault leading to the onset of unstable, dynamic rupture. When rupture nucleation with the state variable friction law takes place naturally, a large fraction of the fault accelerates before accelerating slip is concentrated in what ultimately becomes the rupture nucleation patch. The state evolution accompanying this accelerating slip leads to higher average rupture speeds or a more rapid rupture acceleration to near P wave rupture speeds. Rupture models are also calculated for the seismological asperity problem, that is, the failure of a highly stressed fault patch surrounded by a region of zero stress drop. Dynamic overshoot of slip into the region of zero stress drop roughly agrees with a simple energy balance analysis; the final size of the rupture is proportional to the square of the size of the high stress patch. Earlier frictional stability analyses have led to the definition of a critical fault patch size for rupture nucleation. This critical patch size is generally different from critical crack lengths determined from crack tip energy balance considerations applied to a simpler slip weakening law. In the model calculations, dynamic rupture does not nucleate if the starting patch size is less than the critical patch size. This is consistent with the frictional stability analyses. Thus these model calculations suggest that dynamic rupture following a state variable friction relation is similar to that following a simpler fault slip weakening law. However, when modeling the full cycle of fault motions, rate-dependent frictional responses included in the state variable formulation are important at low slip rates associated with rupture nucleation. The critical rupture nucleation dimension appropriate for a slip weakening fault does not predict the critical nucleation dimension for a state variable fault.

Journal of Geophysical Research Solid Earth↗
USGS2013

Cumulative biological impacts framework for solar energy projects in the California Desert

This project developed analytical approaches, tools and geospatial data to support conservation planning for renewable energy development in the California deserts. Research focused on geographical analysis to avoid, minimize and mitigate the cumulative biological effects of utility-scale solar energy development. A hierarchical logic model was created to map the compatibility of new solar energy projects with current biological conservation values. The research indicated that the extent of compatible areas is much greater than the estimated land area required to achieve 2040 greenhouse gas reduction goals. Species distribution models were produced for 65 animal and plant species that were of potential conservation significance to the Desert Renewable Energy Conservation Plan process. These models mapped historical and projected future habitat suitability using 270 meter resolution climate grids. The results were integrated into analytical frameworks to locate potential sites for offsetting project impacts and evaluating the cumulative effects of multiple solar energy projects. Examples applying these frameworks in the Western Mojave Desert ecoregion show the potential of these publicly-available tools to assist regional planning efforts. Results also highlight the necessity to explicitly consider projected land use change and climate change when prioritizing areas for conservation and mitigation offsets. Project data, software and model results are all available online.

California↗
USGS2006

On the interpretation of energy and energy fluxes of nonlinear internal waves: An example from Massachusetts Bay

A self-consistent formalism to estimate baroclinic energy densities and fluxes resulting from the propagation of internal waves of arbitrary amplitude is derived using the concept of available potential energy. The method can be applied to numerical, laboratory or field data. The total energy flux is shown to be the sum of the linear energy flux ??? u??? p??? dz (primes denote baroclinic quantities), plus contributions from the non-hydrostatic pressure anomaly and the self-advection of kinetic and available potential energy. Using highly resolved observations in Massachusetts Bay, it is shown that due to the presence of nonlinear internal waves periodically propagating in the area, ??? u??? p??? dz accounts for only half of the total flux. The same data show that equipartition of available potential and kinetic energy can be violated, especially when the nonlinear waves begin to interact with the bottom. ?? 2006 Cambridge University Press.

Massachusetts Bay↗
USGS1976

An environmental assessment of impacts of coal development on the water resources of the Yampa River basin, Colorado and Wyoming; Phase I work plan

Coal resources of the western United States are being developed at ever-increasing rates, causing concerns of the effects of mining and associated activities on the environment. The Yampa River basin in northwestern Colorado and south-central Wyoming is undergoing economic development of its coal, oil and gas, and uranium resources. The Yampa River basin assessment is a 21-year program of the U.S. Geological Survey. It is designed primarily to assess the availability and quality of the basin's water resources. The basin assessment also will evaluate potential environmental and selected socioeconomic impacts of energy-resource development plans proposed by mining and power companies. This report serves as a project work plan for the basin assessment's first-phase work activities. Economic development in the Yampa River basin will result in higher levels of residuals (noneconomic byproducts) being discharged into the environment. Residuals-management encompasses the technological and economic interrelationships that should be considered in order to comply with Federal and State environmental-control regulations regarding air quality, water quality, and disposal of solid wastes. The basin assessment, the first phase that is described by this report, is designed to provide Federal, State, and local decision-makers with the basic environmental information needed to formulate and to evaluate policies for the development of energy resources. The techniques applied and conclusions reached in the Yampa River basin assessment should aid similar studies of other energy-rich basins in the western United States.

Colorado, Wyoming↗
USGS1976

An environmental assessment of impacts of coal development on the water resources of the Yampa River basin, Colorado and Wyoming; Phase II work plan

Coal resources of the western United States are being developed at everincreasing rates, causing concerns of the effects of mining and associated activities on the environment. The Yampa River basin in northwestern Colorado and south-central Wyoming is undergoing economic development of its coal, oil and gas, and uranium resources. By 1990, the annual coal mining in the basin is expected to increase to 20 million tons (18 million tonnes), or more than 4 times the 1975 level. As a result, the regional population is expected to at least double over the same period. Power-generation plants fueled by coal are being expanded or constructed in the basin and will have a combined generating capacity of nearly 1,200 megawatts by 1980. The Yampa River Basin Assessment is a 2-year program of the U.S. Geological Survey. It is designed primarily to assess the availability and quality of the basin's water resources. The basin assessment also will evaluate potential environmental and selected socioeconomic impacts of energy-resource development plans proposed by mining and power companies. This report serves as a project work plan for the basin assessment. It describes the program objectives, and the various approaches of analysis and evaluation. Environmental studies are outlined for analyzing both the direct effects of various proposals regarding coal mining, transportation, and conversion, and the secondary effects resulting from increased population and urban growth. Economic development in the Yampa River basin will generate higher levels of residuals which are discharged into the environment. Residuals-management encompasses the technological and economic interrelationships that should be considered to comply with Federal and State environmental-control regulations regarding air quality, water quality, and disposal of solid wastes. The basin assessment described by this report is designed to provide Federal, State, and local decision-makers with the basic environmental information needed to formulate and to evaluate policies for the development of energy resources. The techniques applied and conclusions reached in the Yampa River Basin Assessment should aid similar studies in other energy-rich basins in the western United States.

Colorado, Wyoming↗
USGS2016

Simulating groundwater flow in karst aquifers with distributed parameter models—Comparison of porous-equivalent media and hybrid flow approaches

Understanding karst aquifers, for purposes of their management and protection, poses unique challenges. Karst aquifers are characterized by groundwater flow through conduits (tertiary porosity), and (or) layers with interconnected pores (secondary porosity) and through intergranular porosity (primary or matrix porosity). Since the late 1960s, advances have been made in the development of numerical computer codes and the use of mathematical model applications towards the understanding of dual (primary [matrix] and secondary [fractures and conduits]) porosity groundwater flow processes, as well as characterization and management of karst aquifers. The Floridan aquifer system (FAS) in Florida and parts of Alabama, Georgia, and South Carolina is composed of a thick sequence of predominantly carbonate rocks. Karst features are present over much of its area, especially in Florida where more than 30 first-magnitude springs occur, numerous sinkholes and submerged conduits have been mapped, and numerous circular lakes within sinkhole depressions are present. Different types of mathematical models have been applied for simulation of the FAS. Most of these models are distributed parameter models based on the assumption that, like a sponge, water flows through connected pores within the aquifer system and can be simulated with the same mathematical methods applied to flow through sand and gravel aquifers; these models are usually referred to as porous-equivalent media models. The partial differential equation solved for groundwater flow is the potential flow equation of fluid mechanics, which is used when flow is dominated by potential energy and has been applied for many fluid problems in which kinetic energy terms are dropped from the differential equation solved. In many groundwater model codes (basic MODFLOW), it is assumed that the water has a constant temperature and density and that flow is laminar, such that kinetic energy has minimal impact on flow. Some models have been developed that incorporate the submerged conduits as a one-dimensional pipe network within the aquifer rather than as discrete, extremely transmissive features in a porous-equivalent medium; these submerged conduit models are usually referred to as hybrid models and may include the capability to simulate both laminar and turbulent flow in the one-dimensional pipe network. Comparisons of the application of a porous-equivalent media model with and without turbulence (MODFLOW-Conduit Flow Process mode 2 and basic MODFLOW, respectively) and a hybrid (MODFLOW-Conduit Flow Process mode 1) model to the Woodville Karst Plain near Tallahassee, Florida, indicated that for annual, monthly, or seasonal average hydrologic conditions, all methods met calibration criteria (matched observed groundwater levels and average flows). Thus, the increased effort required, such as the collection of data on conduit location, to develop a hybrid model and its increased computational burden, is not necessary for simulation of average hydrologic conditions (non-laminar flow effects on simulated head and spring discharge were minimal). However, simulation of a large storm event in the Woodville Karst Plain with daily stress periods indicated that turbulence is important for matching daily springflow hydrographs. Thus, if matching streamflow hydrographs over a storm event is required, the simulation of non-laminar flow and the location of conduits are required. The main challenge in application of the methods and approaches for developing hybrid models relates to the difficulty of mapping conduit networks or having high-quality datasets to calibrate these models. Additionally, hybrid models have long simulation times, which can preclude the use of parameter estimation for calibration. Simulation of contaminant transport that does not account for preferential flow through conduits or extremely permeable zones in any approach is ill-advised. Simulation results in other karst aquifers or other parts of the FAS may differ from the comparison demonstrated herein.

Florida↗
USGS2021

Demographic and potential biological removal models identify raptor species sensitive to current and future wind energy

A central challenge in applied ecology is understanding the effect of anthropogenic fatalities on wildlife populations and predicting which populations may be particularly vulnerable and in greatest need of management attention. We used 3 approaches to investigate potential effects of fatalities from collisions with wind turbines on 14 raptor species for both current (106 GW) and anticipated future (241 GW) levels of installed wind energy capacity in the United States. Our goals were to identify species at relatively high vs low risk of experiencing population declines from turbine collisions and to also compare results generated from these approaches. Two of the approaches used a calculated turbine-caused mortality rate to decrement population growth, where population trends were derived either from the North American Breeding Bird Survey or a matrix model parameterized from literature-derived demographic values. The third approach was potential biological removal, which estimates the number of fatalities that allow a population to reach and maintain its optimal sustainable population set by management concerns. Different results among the methods reveal substantial gaps in knowledge and uncertainty in both demographic parameters and species-specific estimates of fatalities from wind turbines. Our results suggest that, of the 14 species studied, those with relatively higher potential of population-level impacts from wind turbine collisions included barn owl, ferruginous hawk, golden eagle, American kestrel, and red-tailed hawk. Burrowing owl, Cooper’s hawk, great horned owl, northern harrier, turkey vulture, and osprey had a relatively lower potential for population impacts, and results were not easily interpretable for merlin, prairie falcon, and Swainson’s hawk. Projections of current levels of fatalities to future wind energy scenarios at 241 GW of installed capacity suggest some species could experience population declines because of turbine collisions. Populations of those species may benefit from research to identify tools to prevent or reduce raptor collisions with wind turbines.

Ecosphere↗
USGS1977

Application of epithermal neutron activation in multielement analysis of silicate rocks employing both coaxial Ge(Li) and low energy photon detector systems

The instrumental activation analysis of silicate rocks using epithermal neutrons has been studied using both high resolution coaxial Ge(Li) detectors and low energy photon detectors, and applied to the determination of 23 elements in eight new U.S.G.S. standard rocks. The analytical use X-ray peaks associated with electron capture or internal conversion processes has been evaluated. Of 28 elements which can be considered to be determinable by instrumental means, the epithermal activation approach is capable of giving improved sensitivity and precision in 16 cases, over the normal INAA procedure. In eleven cases the use of the low energy photon detector is thought to show advantages over convertional coaxial Ge(Li) spectroscopy. ?? 1977 Akade??miai Kiado??.

Journal of Radioanalytical Chemistry↗
USGS2009

Differential energy radiation from two earthquakes in Japan with identical M w : The Kyushu 1996 and Tottori 2000 earthquakes

We examine two closely located earthquakes in Japan that had identical moment magnitudes M w but significantly different energy magnitudes M e . We use teleseismic data from the Global Seismograph Network and strong-motion data from the National Research Institute for Earth Science and Disaster Prevention's K-Net to analyze the 19 October 1996 Kyushu earthquake (M w 6.7, M e 6.6) and the 6 October 2000 Tottori earthquake (M w 6.7, M e 7.4). To obtain regional estimates of radiated energy E S we apply a spectral technique to regional (<200 km) waveforms that are dominated by S and Lg waves. For the thrust-fault Kyushu earthquake, we estimate an average regional attenuation Q(f) 230f 0:65 . For the strike-slip Tottori earthquake, the average regional attenuation is Q(f) 180f 0:6 . These attenuation functions are similar to those derived from studies of both California and Japan earthquakes. The regional estimate of E S for the Kyushu earthquake, 3:8 ?? 10 14 J, is significantly smaller than that for the Tottori earthquake, E S 1:3 ?? 10 15 J. These estimates correspond well with the teleseismic estimates of 3:9 ?? 10 14 J and 1:8 ?? 10 15 J, respectively. The apparent stress (T a = ??E s /M 0 with ?? equal to rigidity) for the Kyushu earthquake is 4 times smaller than the apparent stress for the Tottori earthquake. In terms of the fault maturity model, the significantly greater release of energy by the strike-slip Tottori earthquake can be related to strong deformation in an immature intraplate setting. The relatively lower energy release of the thrust-fault Kyushu earthquake can be related to rupture on mature faults at a subduction environment. The consistence between teleseismic and regional estimates of E S is particularly significant as teleseismic data for computing E S are routinely available for all large earthquakes whereas often there are no near-field data.

Bulletin of the Seismological Society of America↗
USGS2016

Influence of vertical and lateral heat transfer on permafrost thaw, peatland landscape transition, and groundwater flow

Recent climate change has reduced the spatial extent and thickness of permafrost in many discontinuous permafrost regions. Rapid permafrost thaw is producing distinct landscape changes in the Taiga Plains of the Northwest Territories, Canada. As permafrost bodies underlying forested peat plateaus shrink, the landscape slowly transitions into unforested wetlands. The expansion of wetlands has enhanced the hydrologic connectivity of many watersheds via new surface and near-surface flow paths, and increased streamflow has been observed. Furthermore, the decrease in forested peat plateaus results in a net loss of boreal forest and associated ecosystems. This study investigates fundamental processes that contribute to permafrost thaw by comparing observed and simulated thaw development and landscape transition of a peat plateau-wetland complex in the Northwest Territories, Canada from 1970 to 2012. Measured climate data are first used to drive surface energy balance simulations for the wetland and peat plateau. Near-surface soil temperatures simulated in the surface energy balance model are then applied as the upper boundary condition to a three-dimensional model of subsurface water flow and coupled energy transport with freeze-thaw. Simulation results demonstrate that lateral heat transfer, which is not considered in many permafrost models, can influence permafrost thaw rates. Furthermore, the simulations indicate that landscape evolution arising from permafrost thaw acts as a positive feedback mechanism that increases the energy absorbed at the land surface and produces additional permafrost thaw. The modeling results also demonstrate that flow rates in local groundwater flow systems may be enhanced by the degradation of isolated permafrost bodies.

Northwest Territories↗
USGS2021

Accounting for fine-scale forest structure is necessary to model snowpack mass and energy budgets in montane forests

Accurately modeling the effects of variable forest structure and change on snow distribution and persistence is critical to water resource management. The resolution of many snow models is too coarse to represent heterogeneous canopy structure in forests, and therefore, most models simplify forest effects on snowpack mass and energy budgets. To quantify the loss of snowpack prediction from simplifications of forest canopy-mediated processes, we applied a high-resolution energy balance snowpack model at two forested sites at a fine (1 m 2 ) and coarse (100 m 2 ) spatial resolution. Simulating open and forested areas separately, as is done in many land surface models (LSMs), leads to biases between the coarse and fine-scale simulations because there is no representation of areas that are near (e.g., <15 m from) trees but with no overhead canopy, which are common in forests of low to medium tree density. Consistent with previous LSM intercomparisons, the coarser simulations predict greater under-canopy radiation (by 30%–80% at our sites), faster snow ablation (by almost 2×), and earlier snow disappearance (by 1–22 days). Many of these biases are reduced dramatically or eliminated when canopy edge environments are considered in the coarser simulations. Furthermore, remaining disagreement between the 100-m and 1-m models can be partially explained by using a combination of tree height, canopy cover, and canopy edginess (which together can explain 46%–96% of remaining model biases). The lack of information about canopy edges and other fine-scale forest structure characteristics in many current LSMs may limit their reliability for simulating forest disturbance.

California, New Mexico↗
USGS2016

Developing integrated methods to address complex resource and environmental issues

Introduction This circular provides an overview of selected activities that were conducted within the U.S. Geological Survey (USGS) Integrated Methods Development Project, an interdisciplinary project designed to develop new tools and conduct innovative research requiring integration of geologic, geophysical, geochemical, and remote-sensing expertise. The project was supported by the USGS Mineral Resources Program, and its products and acquired capabilities have broad applications to missions throughout the USGS and beyond. In addressing challenges associated with understanding the location, quantity, and quality of mineral resources, and in investigating the potential environmental consequences of resource development, a number of field and laboratory capabilities and interpretative methodologies evolved from the project that have applications to traditional resource studies as well as to studies related to ecosystem health, human health, disaster and hazard assessment, and planetary science. New or improved tools and research findings developed within the project have been applied to other projects and activities. Specifically, geophysical equipment and techniques have been applied to a variety of traditional and nontraditional mineral- and energy-resource studies, military applications, environmental investigations, and applied research activities that involve climate change, mapping techniques, and monitoring capabilities. Diverse applied geochemistry activities provide a process-level understanding of the mobility, chemical speciation, and bioavailability of elements, particularly metals and metalloids, in a variety of environmental settings. Imaging spectroscopy capabilities maintained and developed within the project have been applied to traditional resource studies as well as to studies related to ecosystem health, human health, disaster assessment, and planetary science. Brief descriptions of capabilities and laboratory facilities and summaries of some applications of project products and research findings are included in this circular. The work helped support the USGS mission to “provide reliable scientific information to describe and understand the Earth; minimize loss of life and property from natural disasters; manage water, biological, energy, and mineral resources; and enhance and protect our quality of life.” Activities within the project include the following: Spanned scales from microscopic to planetary; Demonstrated broad applications across disciplines; Included life-cycle studies of mineral resources; Incorporated specialized areas of expertise in applied geochemistry including mineralogy, hydrogeology, analytical chemistry, aqueous geochemistry, biogeochemistry, microbiology, aquatic toxicology, and public health; and Incorporated specialized areas of expertise in geophysics including magnetics, gravity, radiometrics, electromagnetics, seismic, ground-penetrating radar, borehole radar, and imaging spectroscopy. This circular consists of eight sections that contain summaries of various activities under the project. The eight sections are listed below: Laboratory Facilities and Capabilities, which includes brief descriptions of the various types of laboratories and capabilities used for the project; Method and Software Development, which includes summaries of remote-sensing, geophysical, and mineralogical methods developed or enhanced by the project; Instrument Development, which includes descriptions of geophysical instruments developed under the project; Minerals, Energy, and Climate, which includes summaries of research that applies to mineral or energy resources, environmental processes and monitoring, and carbon sequestration by earth materials; Element Cycling, Toxicity, and Health, which includes summaries of several process-oriented geochemical and biogeochemical studies and health-related research activities; Hydrogeology and Water Quality, which includes descriptions of innovative geophysical, remote-sensing, and geochemical research pertaining to hydrogeology and water-quality applications; Hazards and Disaster Assessment, which includes summaries of research and method development that were applied to natural hazards, human-caused hazards, and disaster assessments; and Databases and Framework Studies, which includes descriptions of fundamental applications of geophysical studies and of the importance of archived data.

Circular↗
USGS2006

Early Cretaceous terrestrial ecosystems in East Asia based on food-web and energy-flow models

In recent years, there has been global interest in the environments and ecosystems around the world. It is helpful to reconstruct past environments and ecosystems to help understand them in the present and the future. The present environments and ecosystems are an evolving continuum with those of the past and the future. This paper demonstrates the contribution of geology and paleontology to such continua. Using fossils, we can make an estimation of past population density as an ecosystem index based on food-web and energy-flow models. Late Mesozoic nonmarine deposits are distributed widely on the eastern Asian continent and contain various kinds of fossils such as fishes, amphibians, reptiles, dinosaurs, mammals, bivalves, gastropods, insects, ostracodes, conchostracans, terrestrial plants, and others. These fossil organisms are useful for late Mesozoic terrestrial ecosystem reconstruction using food-web and energy-flow models. We chose Early Cretaceous fluvio-lacustrine basins in the Choyr area, southeastern Mongolia, and the Tetori area, Japan, for these analyses and as a potential model for reconstruction of other similar basins in East Asia. The food-web models are restored based on taxa that occurred in these basins. They form four or five trophic levels in an energy pyramid consisting of rich primary producers at its base and smaller biotas higher in the food web. This is the general energy pyramid of a typical ecosystem. Concerning the population densities of vertebrate taxa in 1 km2 in these basins, some differences are recognized between Early Cretaceous and the present. For example, Cretaceous estimates suggest 2.3 to 4.8 times as many herbivores and 26.0 to 105.5 times the carnivore population. These differences are useful for the evaluation of past population densities of vertebrate taxa. Such differences may also be caused by the different metabolism of different taxa. Preservation may also be a factor, and we recognize that various problems occur in past ecosystem reconstructions. Counts of small numbers of confirmed species and estimates of maximum numbers of species present in the basin are used for the analysis and estimation of energy flow. This approach applies the methods of modern ecosystem analysis. ?? 2005 Elsevier Ltd. All rights reserved.

Cretaceous Research↗
USGS2009

Use of models and observations to assess trends in the 1950–2005 water balance and climate of Upper Klamath Lake, Oregon

A 1‐dimensional surface energy balance model is applied to produce continuous simulations of daily lake evaporation of Upper Klamath Lake, Oregon (UKL) for the period 1950–2005. The model is implemented using observed data from land‐based sites and rafts collected during 2005–2006. Progressively longer, temporally overlapping simulations are produced using observed forcing data sets from sites near UKL. Simulation of the entire 56 years is accomplished using forcing data derived from weather station data and a 1949–2007 regional climate simulation over western North America. Simulated mean annual evaporation for 1950–2005 is 1073 mm. The simulated evaporation estimates are an improvement over existing May–September pan‐derived estimates because the latter are not representative of annual evaporation rates and do not span the multidecadal period of interest over which climate‐driven interannual (and longer) variability is evident. Evaporation and the other components of the water balance display statistically significant trends over the past 56 years that are associated with changes in meteorological forcing over the lake and the radiative and moisture balances at higher elevations of the catchment. Trends in the basin are consistent with and imbedded in regional and hemispheric climate trends that have occurred over the last century.

Oregon↗
USGS2001

Assessing ecosystem effects of reservoir operations using food web-energy transfer and water quality models

We investigated the effects on the reservoir food web of a new temperature control device (TCD) on the dam at Shasta Lake, California. We followed a linked modeling approach that used a specialized reservoir water quality model to forecast operation-induced changes in phytoplankton production. A food web–energy transfer model was also applied to propagate predicted changes in phytoplankton up through the food web to the predators and sport fishes of interest. The food web–energy transfer model employed a 10% trophic transfer efficiency through a food web that was mapped using carbon and nitrogen stable isotope analysis. Stable isotope analysis provided an efficient and comprehensive means of estimating the structure of the reservoir's food web with minimal sampling and background data. We used an optimization procedure to estimate the diet proportions of all food web components simultaneously from their isotopic signatures. Some consumers were estimated to be much more sensitive than others to perturbations to phytoplankton supply. The linked modeling approach demonstrated that interdisciplinary efforts enhance the value of information obtained from studies of managed ecosystems. The approach exploited the strengths of engineering and ecological modeling methods to address concerns that neither of the models could have addressed alone: (a) the water quality model could not have addressed quantitatively the possible impacts to fish, and (b) the food web model could not have examined how phytoplankton availability might change due to reservoir operations.

Ecosystems↗
USGS2010

Estimating discharge of shallow groundwater by transpiration from greasewood in the Northern Great Basin

Evapotranspiration from bare soil and phreatophytes is a principal mechanism of groundwater discharge in arid and semiarid regions of the midwestern and western United States including the Great Basin. The imbalance between independent estimates of groundwater recharge from precipitation and of groundwater discharge based on estimates of groundwater evapotranspiration leads to large uncertainties in groundwater budgets. Few studies have addressed this problem. Energy budget micrometeorological field studies were conducted in a stand of sparse-canopy greasewood growing in an area of shallow groundwater in the western Great Basin during the summer of 1989. The data were used to calculate above-canopy fluxes of sensible and latent heat using the energy budget-Bowen ratio method. The calculated energy budget fluxes were used, with soil surface and plant canopy temperature measurements, to calibrate and apply a two-component, energy-combination model that partitions the energy and heat fluxes between bare soil and the canopy. This permitted the separation of evaporation from the soil and transpiration from greasewood. The calibrated model was used to estimate daily transpiration of groundwater by greasewood growing in an area with a depth to water of about 2 m. The daily rate of groundwater discharge by transpiration during July and August was estimated to be 2.4 mm. A period of 100 days for groundwater discharge at this rate was assumed to estimate an annual discharge of groundwater of 24 cm at the study site.

Great Basin↗
USGS2015

Summer of Applied Geophysical Experience (SAGE): Training for our future geoscientists

Energy and natural resources are crucial to the sustainability of worldwide economies, security, and overall well-being. However, the future workforce in the energy and natural-resources sector is at risk, and meeting the challenges of this dwindling workforce requires well-educated geoscientists in exploration and applied geophysics and related geoscience and technology disciplines. Programs such as geophysical field courses that are supported by SEG and industry, in partnership with academic institutions and government laboratories, are important approaches to maintaining and enhancing expertise in exploration geophysics. One example of a geophysical field course devoted to educating our future workforce is the Summer of Applied Geophysical Experience (SAGE), a four-week program based in Santa Fe, New Mexico, designed to actively engage students in all phases of applied geophysical research. SAGE is a unique educational experience that combines teaching and research as a partnership among universities, industry, government agencies, and professional societies. SAGE teaches the principles and applications of refraction and reflection seismology, magnetics, gravity, GPS, heat flow, several electromagnetic (EM) methods, and ground-penetrating radar (GPR) in a field-based, hands-on setting. More than 850 students and qualified professionals have attended SAGE, many of whom have gone on to become leaders in academia, industry, and government. SAGE students are exposed to the exciting challenges that face earth scientists today, and they develop skills that are necessary to address the world's growing energy demands. Examples of SAGE research projects include mapping archaeological sites and tectonic structure and investigating water and geothermal resources in the Rio Grande rift.

Leading Edge (Tulsa, OK)↗