USGS Science⌕ Search

SEARCH · USGS Science

Results for “American Association of Petroleum Geologists Bulletin”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2Linked to original sources
USGS1982

Stratigraphic reference section for Georges Bank Basin - Depositional model for New England passive margin.

A multichannel seismic reflection profile (U.S. Geological Survey line 19), calibrated with the COST G-1, COST G-2, and Shell Mohican I-100 wells, and seismic-sequence analysis shows that the chronostratigraphic and lithostratigraphic units and depositional history of the Georges Bank basin are similar to those of the Scotian basin. Carbonate rocks of the Iroquois and Abenaki Formations, as much as 16,000 ft (4,800 m) thick, dominated the eastern half of the Georges Bank basin during the Jurassic. As much as 7,500 ft (2,300 m) of the coeval terrigenous clastic deposits of the Mohican, Mohawk, and Mic Mac Formations accumulated updip (westward) in sublittoral, paralic, and nonmarine environments. Siliciclastic deposition, as much as 6,000 ft (1,800 m), dominated the entire basin throughout the Cretaceous and Cenozoic, and it was punctuated briefly by carbonate deposition during the Hauterivian and Paleogene. Tentative correlation between the Georges Bank basin sequences and those of the adjacent, deep North American basin suggests that the deep-sea facies were strongly influenced by depositional events on the shelf. Deposition in both areas has been sensitive to changes in sea level and to paleoclimatic cycles.

Atlantic Ocean, Georges Bank↗
USGS1982

Applications of Landsat imagery to problems of petroleum exploration in Qaidam Basin, China

Tertiary and Quaternary nonmarine, petroleum-bearing sedimentary rocks in the Qaidam basin of remote western China have been extensively deformed by compressive forces. These forces created many folds which are current targets of Chinese exploration programs. Manual techniques of image analysis and interpretation were applied to computer-enhanced Landsat images of the western part of the Qaidam basin in an effort to evaluate the contributions of Landsat imagery in defining the geologic conditions of the basin and to determine its usefulness as an exploration tool in the region. Most success was realized in defining the structural geologic setting of the region. Image-derived interpretations of folds, strike-slip faults, thrust faults, normal or reverse faults, and fractures compared very favorably, in terms of locations and numbers mapped, with Chinese data compiled from years of extensive field mapping. The image studies resulted in the identification of at least one subsurface fold that had not been detected by field mapping. The results of this study have direct exploration significance. Many potential hydrocarbon trapping structures were precisely located and information was obtained that may have significant implications with respect to fluid migration or attempts to locate offset reservoirs and buried folds. In addition, the orientations of major structural trends defined from Landsat imagery correlate well with those predicted for the area based on global tectonic theory. These correlations suggest that similar orientations exist in the eastern half of the basin where folded rocks are mostly obscured by unconsolidated surface sediments and where limited exploration has occurred.

Qaidam Basin↗
USGS1982

Depositional setting and diagenetic evolution of some Tertiary unconventional reservoir rocks, Uinta Basin, Utah

The Douglas Creek Member of the Tertiary Green River Formation underlies much of the Uinta basin, Utah, and contains large volumes of oil and gas trapped in a complex of fractured low-permeability sandstone reservoirs. In the southeastern part of the basin at Pariette Bench, the Eocene Douglas Creek Member is a thick sequence of fine-grained alluvial sandstone complexly intercalated with lacustrine claystone and carbonate rock. Sediments were deposited in a subsiding intermontane basin along the shallow fluctuating margin of ancient Lake Uinta. Although the Uinta basin has undergone postdepositional uplift and erosion, the deepest cored rocks at Pariette Bench have never been buried more than 9,800 ft (3,000 m). The sandstones, dominantly lithic arkoses and feldspathic litharenites, were derived from source terranes south of the Uinta basin. Secondary silica and several generations of authigenic calcite [Ca 1.8-1.9 (Mg 0.02-0.06 Fe 0.02-0.06 )(CO 3 ) 2 ], dolomite [Ca 1.3-1.4 (Mg 0.6-0.7 Fe 0.02-0.04 )(CO 3 ) 2 ], and ankerite [Ca 1.2-1.3 (Mg 0.2-0.3 Fe 0.4-0.6 )(CO 3 ) 2 ] form a replacive cement in the sandstones. Commonly, syntaxial overgrowths of late iron-bearing carbonate occur on detrital grains and preexisting relicts of iron-free carbonate cement. In sandstone where carbonate has been partly dissolved, abundant authigenic illite, partly ordered mixed- ayer illite-smectite, and small amounts of chlorite partly to completely fill secondary pores. Isotopic composition of carbonate cement and grain-supported rock range from -0.39 to -6.18 ^pmil for ^dgr 13 C and -7.80 to -13.98 ^pmil for ^dgr 18 O, indicating that authigenic carbonate formed at low temperatures in the presence of meteoric waters by a process of solution-precipitation. Enrichment of carbon and oxygen in early diagenetic calcite and fossiliferous rock relative to late diagenetic ankerite indicates a trend toward lighter isotopic carbonate compositions with increasing diagenesis. Kerogenous rocks at Pariette Bench are thermochemically immature and therefore are not the source of oil produced in the field. Hydrocarbons are compositionally similar to some of the oils produced from the Green River Formation in the Bluebell-Altamont field and are interpreted to have migrated from mature Green River source rocks through a network of open fractures. The occurrence of small amounts of hydrocarbon in secondary pores indicates that its emplacement postdated carbonate dissolution.

Utah↗
USGS1982

Carbonate porosity versus depth: A predictable relation for south Florida

This study examines the porosity of limestones and dolomites in the South Florida basin. Porosity data are derived from borehole-gravity measurements and from suites of acoustic, neutron, and density logs. Both types of wire-line measurements sample large volumes of rock relative to petrographic methods and can be examined at vertical scales approaching those of aquifers and hydrocarbon reservoirs. Investigation depths range from the surface to about 18,000 ft (5,500 m) and span the transition from high-porosity near-surface carbonate sediments of Pleistocene age to much denser Mesozoic carbonate rocks with porosities of only a few percent. Carbonate porosity in the South Florida basin was affected by a variety of diagenetic processes. However, a number of factors that could complicate porosity-depth relations are of limited importance in southern Florida. The basin contains little clastic material; present depths of burial are about equal to maximum depths of burial; the influences of tectonism, geopressures, and hydrocarbon accumulations are minimal. Curves of porosity versus depth, reflecting large-scale porosity-loss processes in the subsurface, are derived for a composite carbonate section and for carbonate strata of different ages and compositions. The decrease of porosity with depth for a composite carbonate section representing a wide range of depositional environments and subsequent diagenetic histories can be characterized by the exponential function ^phgr = 41.73e -z 8197/ (ft) [^phgr = 41.73e -z 2498/ (m)], where ^phgr is the porosity (%) and z is the depth below ground level (feet or meters). Average porosity is reduced by a factor of two in a depth interval of about 5,700 ft (1,740 m). Carbonate strata of different ages that are buried to equal depths show no systematic porosity differences. This implies that the effect of time on porosity in these rocks is probably subordinate to that of burial depth. The data also show a faster than expected rate of porosity decrease with depth for rocks of Eocene age and younger. If it is assumed that the decrease in the volume of evaporites in these rocks indicates less saline pore fluids, porosity loss in shallow-water carbonates may be inversely related to the magnesium content of pore waters. Dolomite porosity is lower than limestone porosity in the near surface, but does not decrease as rapidly with depth. Below about 5,600 ft (1,700 m), dolomite is more porous than limestone. It is hypothesized that most dolomitization occurred relatively early and either reduced original porosity or selectively favored lower-porosity limestones. With continued burial, dolomite was more resistant than limestone to associated porosity-reducing effects.

Florida↗
USGS1983

Structure, burial history, and petroleum potential of frontal thrust belt and adjacent foreland, southwest Montana

The frontal thrust belt in the Lima area of southwestern Montana consists of blind (nonsurfacing) thrusts of the Lima thrust system beneath the Lima anticline and the Tendoy thrust sheet to the west. The Tendoy sheet involves Mississippian through Cretaceous rocks of the southwest-plunging nose of the Mesozoic Blacktail-Snowcrest uplift that are thrust higher (northeast) onto the uplift. The front of the Tendoy sheet west of Lima locally has been warped by later compressive deformation which also involved synorogenic conglomerates of the structurally underlying Beaverhead Formation. To the north, recent extension faulting locally has dropped the front of the Tendoy sheet beneath Quaternary gravels. Rocks of the exposed Tendoy sheet have never been deeply buried, based on itrinite reflectance of <= 0.6%, conodont CAI (color alteration index) values that are uniformly 1, and on supporting organic geochemical data from Paleozoic rocks from the Tendoy thrust sheet. Directly above and west of the Tendoy sheet lie formerly more deeply buried rocks of the Medicine Lodge thrust system. Their greater burial depth is indicated by higher conodont CAI values. West-dipping post-Paleocene extension faults truncate much of the rear part of the Tendoy sheet and also separate the Medicine Lodge sheet from thrust sheets of the Beaverhead Range still farther west. The Laramide Blacktail-Snowcrest uplift east of the frontal thrust belt is asymmetric. Its southeast, steeper limb is exposed along the Snowcrest Range. This limb extends southwestward in the complexly deformed Snowcrest structural terrane. Northwest-dipping thrusts on this limb involve basement rocks and probably merge with depth into a major sub-Snowcrest Range thrust. This major thrust borders and is chiefly responsible for the Blacktail-Snowcrest uplift and adjacent Ruby synclinorium to the southeast. Uniform conodont CAI values of 1 from both the southeast and northwest flanks of the Blacktail-Snowcrest uplift indicate that no thick cover of Upper Cretaceous or younger rocks extended over the flanks of the uplift. During Mississippian through Permian time, the area of later Laram de uplift underwent more rapid subsidence than the area of the Laramide Ruby syncline and the Centennial basin to the southeast. The inferred sub-Snowcrest Range thrust fault apparently represents a reactivated zone of basement weakness. The intersection of thrust-belt and foreland trends, similar to the Uinta uplift area to the south, probably formed a number of structural traps for hydrocarbons which have not yet been tested. Potential petroleum source beds and reservoir rocks are both present in southwest Montana. However, remnants of Tertiary lava flows through much of the area, Tertiary to recent basin-and-range faulting, and supermaturity with respect to oil of Permian and older rocks in the western Centennial uplift area are additional factors which must be considered in any estimate of hydrocarbon potential of the Cordilleran overthrust belt and adjacent foreland in extreme southwestern Montana.

Montana↗
USGS2005

Role of reservoir engineering in the assessment of undiscovered oil and gas resources in the National Petroleum Reserve, Alaska

The geology and reservoir-engineering data were integrated in the 2002 U.S. Geological Survey assessment of the National Petroleum Reserve in Alaska (NPRA). VVhereas geology defined the analog pools and fields and provided the basic information on sizes and numbers of hypothesized petroleum accumulations, reservoir engineering helped develop necessary equations and correlations, which allowed the determination of reservoir parameters for better quantification of in-place petroleum volumes and recoverable reserves. Seismic- and sequence-stratigraphic study of the NPRA resulted in identification of 24 plays. Depth ranges in these 24 plays, however, were typically greater than depth ranges of analog plays for which there were available data, necessitating the need for establishing correlations. The basic parameters required were pressure, temperature, oil and gas formation volume factors, liquid/gas ratios for the associated and nonassociated gas, and recovery factors. Finally, the re sults of U.S. Geological Survey deposit simulation were used in carrying out an economic evaluation, which has been separately published. Copyright ?? 2005. The American Association of Petroleum Geologists. All rights reserved.

American Association of Petroleum Geologists Bulle↗
USGS2005

An evaluation of the U.S. Geological Survey World Petroleum Assessment 2000

This study compares the additions to conventional crude oil and natural gas reserves as reported from January 1996 to December 2003 with the estimated undiscovered and reserve-growth volumes assessed in the U.S. Geological Survey World Petroleum Assessment 2000, which used data current through 1995. Approximately 28% of the estimated additions to oil reserves by reserve growth and approximately 11% of the estimated undiscovered oil volumes were realized in the 8 yr since the assessment (27% of the time frame for the assessment). Slightly more than half of the estimated additions to gas reserves by reserve growth and approximately 10% of the estimated undiscovered gas volumes were realized. Between 1995 and 2003, growth of oil reserves in previously discovered fields exceeded new-field discoveries as a source of global additions to reserves of conventional oil by a ratio of 3:1. The greatest amount of reserve growth for crude oil occurred in the Middle East and North Africa, whereas the greatest contribution from new-field discoveries occurred in sub-Saharan Africa. The greatest amount of reserve growth for natural gas occurred in the Middle East and North Africa, whereas the greatest contribution from new-field discoveries occurred in the Asia Pacific region. On an energy-equivalent basis, volumes of new gas-field discoveries exceeded new oil-field discoveries. Copyright ?? 2005. The American Association of Petroleum Geologists. All rights reserved.

American Association of Petroleum Geologists Bulle↗
USGS2010

Assessment of undiscovered conventional oil and gas resources, onshore Claiborne Group, United Statespart of the northern Gulf of Mexico Basin

The middle Eocene Claiborne Group was assessed for undiscovered conventional hydrocarbon resources using established U.S. Geological Survey assessment methodology. This work was conducted as part of a 2007 assessment of Paleogene-Neogene strata of the northern Gulf of Mexico Basin, including the United States onshore and state waters (Dubiel et al., 2007). The assessed area is within the Upper Jurassic-CretaceousTertiary composite total petroleum system, which was defined for the assessment. Source rocks for Claiborne oil accumulations are interpreted to be organic-rich, downdip, shaley facies of the Wilcox Group and the Sparta Sand of the Claiborne Group; gas accumulations may have originated from multiple sources, including the Jurassic Smackover Formation and the Haynesville and Bossier shales, the Cretaceous Eagle Ford and Pearsall (?) formations, and the Paleogene Wilcox Group and Sparta Sand. Hydrocarbon generation in the basin started prior to deposition of Claiborne sediments and is currently ongoing. Primary reservoir sandstones in the Claiborne Group include, from oldest to youngest, the Queen City Sand, Cook Mountain Formation, Sparta Sand, Yegua Formation, and the laterally equivalent Cockfield Formation. A geologic model, supported by spatial analysis of petroleum geology data, including discovered reservoir depths, thicknesses, temperatures, porosities, permeabilities, and pressures, was used to divide the Claiborne Group into seven assessment units (AUs) with three distinctive structural and depositional settings. The three structural and depositional settings are (1) stable shelf, (2) expanded fault zone, and (3) slope and basin floor; the seven AUs are (1) lower Claiborne stable-shelf gas and oil, (2) lower Claiborne expanded fault-zone gas, (3) lower Claiborne slope and basin-floor gas, (4) lower Claiborne Cane River, (5) upper Claiborne stable-shelf gas and oil, (6) upper Claiborne expanded fault-zone gas, and (7) upper Claiborne slope and basin-floor gas. Based on Monte Carlo simulation of justified input parameters, the total estimated mean undiscovered conventional hydrocarbon resources in the seven AUs combined are 52 million bbl of oil, 19.145 tcf of natural gas, and 1.205 billion bbl of natural gas liquids. This article describes the conceptual geologic model used to define the seven Claiborne AUs, the characteristics of each AU, and the justification behind the input parameters used to estimate undiscovered resources for each AU. The great bulk of undiscovered hydrocarbon resources are predicted to be nonassociated gas and natural gas liquids contained in deep (mostiy >12,000-ft [3658 m], present-day drilling depths), overpressured, structurally complex outer shelf or slope and basin-floor Claiborne reservoirs. The continuing development of these downdip objectives is expected to be the primary focus of exploration activity for the onshore middle Eocene Gulf Coast in the coming decades. ?? 2010 U.S. Geological Survey. All rights reserved.

American Association of Petroleum Geologists Bulle↗
USGS2008

Families of miocene monterey crude oil, seep, and tarball samples, coastal California

Biomarker and stable carbon isotope ratios were used to infer the age, lithology, organic matter input, and depositional environment of the source rocks for 388 samples of produced crude oil, seep oil, and tarballs to better assess their origins and distributions in coastal California. These samples were used to construct a chemometric (multivariate statistical) decision tree to classify 288 additional samples. The results identify three tribes of 13C-rich oil samples inferred to originate from thermally mature equivalents of the clayey-siliceous, carbonaceous marl and lower calcareous-siliceous members of the Monterey Formation at Naples Beach near Santa Barbara. An attempt to correlate these families to rock extracts from these members in the nearby COST (continental offshore stratigraphic test) (OCS-Cal 78-164) well failed, at least in part because the rocks are thermally immature. Geochemical similarities among the oil tribes and their widespread distribution support the prograding margin model or the banktop-slope-basin model instead of the ridge-and-basin model for the deposition of the Monterey Formation. Tribe 1 contains four oil families having geochemical traits of clay-rich marine shale source rock deposited under suboxic conditions with substantial higher plant input. Tribe 2 contains four oil families with traits intermediate between tribes 1 and 3, except for abundant 28,30-bisnorhopane, indicating suboxic to anoxic marine marl source rock with hemipelagic input. Tribe 3 contains five oil families with traits of distal marine carbonate source rock deposited under anoxic conditions with pelagic but little or no higher plant input. Tribes 1 and 2 occur mainly south of Point Conception in paleogeographic settings where deep burial of the Monterey source rock favored petroleum generation from all three members or their equivalents. In this area, oil from the clayey-siliceous and carbonaceous marl members (tribes 1 and 2) may overwhelm that from the lower calcareous-siliceous member (tribe 3) because the latter is thinner and less oil-prone than the overlying members. Tribe 3 occurs mainly north of Point Conception where shallow burial caused preferential generation from the underlying lower calcareous-siliceous member or another unit with similar characteristics. In a test of the decision tree, 10 tarball samples collected from beaches in Monterey and San Mateo counties in early 2007 were found to originate from natural seeps representing different organofacies of Monterey Formation source rock instead from one anthropogenic pollution event. The seeps apparently became more active because of increased storm activity. Copyright ?? 2008. The American Association of Petroleum Geologists. All rights reserved.

American Association of Petroleum Geologists Bulle↗
USGS2005

Egret-Hibernia(!), a significant petroleum system, northern Grand Banks area, offshore eastern Canada

Egret-Hibernia(!) is a well-explored petroleum system (3.25 billion barrels oil equivalent [BOE]) located in the Jeanne d'Arc Basin on the Labrador - Newfoundland shelf. Rifting and sediment fill began in the Late Triassic. Egret source rock was deposited in the Late Jurassic at about 153 Ma. After this time, alternating reservoir rock and seal rock were deposited with some syndepositional faulting. By the end of the Early Cretaceous, faults and folds had formed numerous structural traps. For the next 100 m.y., overburden rock thermally matured the source rock when it reached almost 4 km (2.5 mi) burial depth. For 2 km (1.25 mi) below this depth, oil and gas were expelled, until the source was depleted. The expelled petroleum migrated updip to nearby faulted, anticlinal traps, where much of it migrated across faults and upsection to the Hibernia Formation (44% recoverable oil) and Avalon Formation (28%). Accumulation size decreased, and gas content increased from west to east, independent of trap size. These changes correspond to a decrease in source rock richness and quality from west to east. Almost all (96%) of the discovered petroleum resides in the Lower Cretaceous or older reservoir rock units. All accumulations found to date are normally pressured in structural traps. Fifty-two exploration wells found eighteen discoveries. Their size ranges from 1.2 to 0.01 billion BOE. Most discoveries were made between 1979 and 1991. The discovery cycle began with larger accumulations and progressed to smaller accumulations. The estimated sizes of the larger accumulations have grown since 1990. Estimated mean value for undiscovered hydrocarbons is 3.8 billion BOE, thereby raising the ultimate size of Egret-Hibernia(!) to 6.19 billion BOE. Copyright ?? 2005. The American Association of Petroleum Geologists. All rights reserved.

American Association of Petroleum Geologists Bulle↗
USGS2006

Crustal insights from gravity and aeromagnetic analysis: Central North Slope, Alaska

Aeromagnetic and gravity data are processed and interpreted to reveal deep and shallow information about the crustal structure of the central North Slope, Alaska. Regional aeromagnetic anomalies primarily reflect deep crustal features. Regional gravity anomalies are more complex and require detailed analysis. We constrain our geophysical models with seismic data and interpretations along two transects including the Trans-Alaska Crustal Transect. Combined geophysical analysis reveals a remarkable heterogeneity of the pre-Mississippian basement. In the central North Slope, pre-Mississippian basement consists of two distinct geophysical domains. To the southwest, the basement is dense and highly magnetic; this basement is likely mafic and mechanically strong, possibly acting as a buttress to basement involvement in Brooks Range thrusting. To the northeast, the central North Slope basement consists of lower density, moderately magnetic rocks with several discrete regions (intrusions?) of more magnetic rocks. A conjugate set of geophysical trends, northwest-southeast and southwest-northeast, may be a factor in the crustal response to tectonic compression in this domain. High-resolution gravity and aeromagnetic data, where available, reflect details of shallow fault and fold structure. The maps and profile models in this report should provide useful guidelines and complementary information for regional structural studies, particularly in combination with detailed seismic reflection interpretations. Future challenges include collection of high-resolution gravity and aeromagnetic data for the entire North Slope as well as additional deep crustal information from seismic, drilling, and other complementary methods. Copyrights ?? 2006. The American Association of Petroleum Geologists. All rights reserved.

American Association of Petroleum Geologists Bulle↗
USGS2005

Integrated core-log petrofacies analysis in the construction of a reservoir geomodel: A case study of a mature Mississippian carbonate reservoir using limited data

Small independent operators produce most of the Mississippian carbonate fields in the United States mid-continent, where a lack of integrated characterization studies precludes maximization of hydrocarbon recovery. This study uses integrative techniques to leverage extant data in an Osagian and Meramecian (Mississippian) cherty carbonate reservoir in Kansas. Available data include petrophysical logs of varying vintages, limited number of cores, and production histories from each well. A consistent set of assumptions were used to extract well-level porosity and initial saturations, from logs of different types and vintages, to build a geomodel. Lacking regularly recorded well shut-in pressures, an iterative technique, based on material balance formulations, was used to estimate average reservoir-pressure decline that matched available drillstem test data and validated log-analysis assumptions. Core plugs representing the principal reservoir petrofacies provide critical inputs for characterization and simulation studies. However, assigning plugs among multiple reservoir petrofacies is difficult in complex (carbonate) reservoirs. In a bottom-up approach, raw capillary pressure (Pc) data were plotted on the Super-Pickett plot, and log- and core-derived saturation-height distributions were reconciled to group plugs by facies, to identify core plugs representative of the principal reservoir facies, and to discriminate facies in the logged interval. Pc data from representative core plugs were used for effective pay evaluation to estimate water cut from completions, in infill and producing wells, and guide-selective perforations for economic exploitation of mature fields. The results from this study were used to drill 22 infill wells. Techniques demonstrated here can be applied in other fields and reservoirs. Copyright ?? 2005. The American Association of Petroleum Geologists. All rights reserved.

American Association of Petroleum Geologists Bulle↗
USGS2007

Total petroleum system assessment of undiscovered resources in the giant Barnett Shale continuous (unconventional) gas accumulation, Fort Worth Basin, Texas

Undiscovered natural gas having potential for additions to reserves in the Mississippian Barnett Shale of the Fort Worth Basin, north-central Texas, was assessed using the total petroleum system assessment unit concept and a cell-based methodology for continuous-type (Unconventional) resources. The Barnett-Paleozoic total petroleum system is defined in the Bend arch-Fort Worth Basin as encompassing the area in which the organic-rich Barnett is the primary source rock for oil and gas produced from Paleozoic carbonate and clastic reservoirs. Exploration, technology, and drilling in the Barnett Shale play have rapidly evolved in recent years, with about 3500 vertical and 1000 horizontal wells completed in the Barnett through 2005 and more than 85% of the them completed since 1999. Using framework geology and historical production data, assessment of the Barnett Shale was performed by the U.S. Geological Survey using vertical wells at the peak of vertical well completions and before a transition to completions with horizontal wells. The assessment was performed after (1) mapping critical geological and geochemical parameters to define assessment unit areas with future potential, (2) defining distributions of drainage area (cell size) and estimating ultimate recovery per cell, and (3) estimating future success rates. Two assessment units are defined and assessed for the Barnett Shale continuous gas accumulation, resulting in a total mean undiscovered volume having potential for additions to reserves of 26.2 TCFG. The greater Newark East fracture-barrier continuous Barnett Shale gas assessment unit represents a core-producing area where thick, organic-rich, siliceous Barnett Shale is within the thermal window for gas generation (Ro ??? 1.1%) and is overlain and underlain by impermeable limestone barriers (Pennsylvanian Marble Falls Limestone and Ordovician Viola Limestone, respectively) that serve to confine induced fractures during well completion to maximize gas recovery. The extended continuous Barnett Shale gas assessment unit, which had been less explored, defines a geographic area where Barnett Shale is (1) within the thermal window for gas generation, (2) greater than 100 ft (30 m) thick, and (3) where at least one impermeable limestone barrier is absent. Mean undiscovered gas having potential for additions to reserves in the greater Newark East assessment unit is estimated at 14.6 tcf, and in the less tested extended assessment unit, a mean resource is estimated at 11.6 TCFG. A third hypothetical basin-arch Barnett Shale oil assessment unit was defined but not assessed because of a lack of production data. Copyright ?? 2007. The American Association of Petroleum Geologists. All rights reserved.

American Association of Petroleum Geologists Bulle↗
USGS2011

Geochemical analysis of Atlantic rim water, Carbon County, Wyoming: New applications for characterizing coalbed natural gas reservoirs

Coalbed natural gas (CBNG) production typically requires the extraction of large volumes of water from target formations, thereby influencing any associated reservoir systems. We describe isotopic tracers that provide immediate data on the presence or absence of biogenic natural gas and the identify methane-containing reservoirs are hydrologically confined. Isotopes of dissolved inorganic carbon and strontium, along with water quality data, were used to characterize the CBNG reservoirs and hydrogeologic systems of Wyoming’s Atlantic Rim. Water was analyzed from a stream, springs, and CBNG wells. Strontium isotopic composition and major ion geochemistry identify two groups of surface water samples. Muddy Creek and Mesaverde Group spring samples are Ca-Mg-SO4–type water with higher 87Sr/86Sr, reflecting relatively young groundwater recharged from precipitation in the Sierra Madre. Groundwaters emitted from the Lewis Shale springs are Na-HCO3–type waters with lower 87Sr/86Sr, reflecting sulfate reduction and more extensive water-rock interaction. To distinguish coalbed waters, methanogenically enriched d13CDIC was used from other natural waters. Enriched d13CDIC, between −3.6 and +13.3‰, identified spring water that likely originates from Mesaverde coalbed reservoirs. Strongly positive d13CDIC, between +12.6 and +22.8‰, identified those coalbed reservoirs that are confined, whereas lower d13CDIC, between +0.0 and +9.9‰, identified wells within unconfined reservoir systems

Wyoming↗
USGS2010

Geochemical constraints on the origin and volume of gas in the New Albany Shale (Devonian-Mississippian), eastern Illinois Basin

This study involved analyses of kerogen petrography, gas desorption, geochemistry, microporosity, and mesoporosity of the New Albany Shale (Devonian-Mississippian) in the eastern part of the Illinois Basin. Specifically, detailed core analysis from two locations, one in Owen County, Indiana, and one in Pike County, Indiana, has been conducted. The gas content in the locations studied was primarily dependent on total organic carbon content and the micropore volume of the shales. Gas origin was assessed using stable isotope geochemistry. Measured and modeled vitrinite reflectance values were compared. Depth of burial and formation water salinity dictated different dominant origins of the gas in place in the two locations studied in detail. The shallower Owen County location (415-433 m [1362-1421 ft] deep) contained significant additions of microbial methane, whereas the Pike County location (832-860 m [2730-2822 ft] deep) was characterized exclusively by thermogenic gas. Despite differences in the gas origin, the total gas in both locations was similar, reaching up to 2.1 cm3/g (66 scf/ton). Lower thermogenic gas content in the shallower location (lower maturity and higher loss of gas related to uplift and leakage via relaxed fractures) was compensated for by the additional generation of microbial methane, which was stimulated by an influx of glacial melt water, inducing brine dilution and microbial inoculation. The characteristics of the shale of the Maquoketa Group (Ordovician) in the Pike County location are briefly discussed to provide a comparison to the New Albany Shale. Copyright ??2010. The American Association of Petroleum Geologists. All rights reserved.

American Association of Petroleum Geologists Bulle↗
USGS2003

Deformation and the timing of gas generation and migration in the eastern Brooks Range foothills, Arctic National Wildlife Refuge, Alaska

Along the southeast border of the 1002 Assessment Area in the Arctic National Wildlife Refuge, Alaska, an explicit link between gas generation and deformation in the Brooks Range fold and thrust belt is provided through petrographic, fluid inclusion, and stable isotope analyses of fracture cements integrated with zircon fission-track data. Predominantly quartz-cemented fractures, collected from thrusted Triassic and Jurassic rocks, contain crack-seal textures, healed microcracks, and curved crystals and fluid inclusion populations, which suggest that cement growth occurred before, during, and after deformation. Fluid inclusion homogenization temperatures (175–250 C) and temperature trends in fracture samples suggest that cements grew at 7–10 km depth during the transition from burial to uplift and during early uplift. CH 4 -rich (dry gas) inclusions in the Shublik Formation and Kingak Shale are consistent with inclusion entrapment at high thermal maturity for these source rocks. Pressure modeling of these CH 4 -rich inclusions suggests that pore fluids were overpressured during fracture cementation. Zircon fission-track data in the area record postdeposition denudation associated with early Brooks Range deformation at 64 3 Ma. With a closure temperature of 225–240 C, the zircon fission-track data overlap homogenization temperatures of coeval aqueous inclusions and inclusions containing dry gas in Kingak and Shublik fracture cements. This critical time-temperature relationship suggests that fracture cementation occurred during early Brooks Range deformation. Dry gas inclusions suggest that Shublik and Kingak source rocks had exceeded peak oil and gas generation temperatures at the time structural traps formed during early Brooks Range deformation. The timing of hydrocarbon generation with respect to deformation therefore represents an important exploration risk for gas exploration in this part of the Brooks Range fold and thrust belt. The persistence of gas high at thermal maturity levels suggests, however, that significant volumes of gas may have been generated.

Alaska↗