SEARCH · USGS Science

Results for “Series in Remote Sensing”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 343 records · Page 19Linked to original sources

USGS2019

Toutle River debris flows initiated by atmospheric rivers: November 2006

In early November, 2006, an atmospheric river brought heavy rainfall and high freezing levels to the Pacific Northwest. Without snowpack to buffer the hydrologic response, the storm caused widespread landslides and debris flows in drainages sourced from every central Cascades volcano. At Mount St. Helens, in southwestern Washington State, intense rainfall in the crater of the volcano caused at least two mass failures with an aggregate volume of 4.5 million m3, which spawned a series of debris flows with velocities as great as 11 m/s. The debris flows incised Loowit Creek as much as 9 m and traveled 16 river km before transforming to hyperconcentrated flow via rapid dilution at the confluence of North Fork Toutle River (NFT), Castle Creek, and Maratta Creek (Figure 1). Reduced channel gradient downstream lowered velocity enough to transform to sediment-laden streamflow less than 40 km from the source, where suspended-sediment concentration (SSC) peaked at 177,000 mg/L. Heavy rain persisted for several days, producing over 100 cm of rainfall in upper NFT basin which caused immediate remobilization of surface deposits; half of the annual suspended-sediment discharge (SSQ) for water year (WY) 2007 was transported in 5 days, despite a relatively low 7-year flood recurrence interval. This analysis expands upon Major et al. (2005), Pitlick et al. (2007), and Olsen (2011) to document the largest suite of rainfall-triggered debris flows identified to date at Mount St. Helens. We investigate debris flow initiation, velocity, deposition, and downstream sediment flux in the NFT basin by integrating data from near real-time monitoring stations, remote sensing, terrestrial surveying, and fluvial sediment samples.

Washington↗

USGS2019

Landsat time series assessment of invasive annual grasses following energy development

Invasive annual grasses are of concern in many areas of the Western United States because they tolerate resource variability and have high reproductive capacity, with propagules that are readily dispersed in disturbed areas like those created and maintained for energy development. Early-season invasive grasses “green up” earlier than the most native plants, producing a distinct pulse of greenness in the early spring that can be exploited to identify their location using multi-date imagery. To determine if invasive annual grasses increased around energy development areas after the construction phase, we calculated an invasive index using Landsat TM and ETM+ imagery for a 34-year time period (1985–2018) and assessed trends for 1755 wind turbines installed between 1988 and 2013 in the Southern California Desert. The index uses the maximum normalized difference vegetation index (NDVI) for early-season greenness (January–June) and mean NDVI (July–October) for the later dry season. We estimated the relative cover of invasive annuals each year at turbine locations and control sites, and tested for changes before and after each turbine was installed. The time series was also mapped across the region and temporal trends were assessed relative to seasonal precipitation. The results showed an increase in early-season invasives at turbine sites after installation, but also an increase in many of the surrounding control areas. Maps of the invasive index show a region-wide increase starting at around 1998, and a great deal of the increase occurred in areas surrounding wind development sites. These results suggest that invasions around the energy developments occurred within the context of a larger regional invasion, and while the development did not necessarily initiate the invasion, annual grasses were more prevalent around the development areas.

California↗

USGS2014

Landsat: Sustaining earth observations beyond Landsat 8

The Landsat series of Earth-observing satellites began 41-years ago as a partnership between the U.S. Geological Survey (USGS) of the Department of the Interior (DOI) and The National Aeronautics and Space Administration (NASA). For the past 41 years, Landsat satellites and associated U.S. Government ground processing, distribution, and archiving systems have acquired and made available global, moderate-resolution, multispectral measurements of land and coastal regions, providing humankind’s longest record of our planet from space. Landsat information is truly a national asset, providing an important and unique capability that benefits abroad community, including Federal, state, and local governments; globalchange science; academia, and the private sector.

Photogrammetric Engineering and Remote Sensing↗

USGS2015

Assessment of existing and potential landslide hazards resulting from the April 25, 2015 Gorkha, Nepal earthquake sequence

Introduction On April 25, 2015, a large ( M 7.8) earthquake shook much of central Nepal and was followed by a series of M >6 aftershocks, including a M 7.3 event on May 12, 2015. This earthquake and aftershocks, referred to as the “Gorkha earthquake sequence,” caused thousands of fatalities, damaged and destroyed entire villages, and displaced millions of residents. The earthquakes also triggered thousands of landslides in the exceedingly steep topography of Nepal; these landslides were responsible for hundreds of fatalities, and blocked vital roads and trails to affected villages (fig. 1). Landslides caused by the Gorkha earthquake sequence continue to pose both immediate and long-term hazards to villages and infrastructure within the affected region. Some landslides blocked rivers and thus created another potential concern for villages located downstream. With the support of the United States Agency for International Development (USAID), Office of Foreign Disaster Assistance (OFDA), and in collaboration with earthquake-hazard organizations from both the United States (for example, U.S. National Science Foundation Geoengineering Extreme Event Reconnaissance [GEER] Team) and Nepal (International Centre for Integrated Mountain Development [ICIMOD]), the U.S. Geological Survey (USGS) responded to this crisis by providing landslide-hazard expertise to Nepalese agencies and affected villages. In addition to collaborating with an international group of remote-sensing scientists to document the spatial distribution of landsliding in the first few weeks following the earthquake, the USGS conducted in-country landslide hazard assessments for 10 days beginning May 24, 2015. Much of the information obtained by the USGS during their time in Nepal was conveyed directly to affected villages and government agencies as opportunities arose. Upon return to the United States, data organization, interpretation, and synthesis began immediately to provide a rapid assessment of landslide hazards for use by Nepalese agencies during the 2015 summer monsoon (typically occurring from June through September). This report provides a detailed account of assessments performed in May and June 2015 and focuses on valley-blocking landslides because they have the potential to pose considerable hazard to many villages in Nepal. First, we provide a seismological background of Nepal and then detail the methods used for both external and in-country data collection and interpretation. Our results consist of an overview of landsliding extent, a characterization of all valley-blocking landslides identified during our work, and a description of video resources that provide high resolution coverage of approximately 1,000 kilometers (km) of river valleys and surrounding terrain affected by the Gorkha earthquake sequence. This is followed by a description of site-specific landslide-hazard assessments conducted while in Nepal and includes detailed descriptions of five noteworthy case studies. Finally, we assess the expectation for additional landslide hazards during the 2015 summer monsoon season.

Open-File Report↗

USGS2015

EAARL-B coastal topography: Chandeleur Islands, Louisiana, 2012: seamless (bare earth and submerged)

These remotely sensed, geographically referenced elevation measurements of light detection and ranging ( lidar )-derived seamless (bare-earth and submerged) topography datasets were produced by the U.S. Geological Survey ( USGS ), St . Petersburg Coastal and Marine Science Center, St . Petersburg, Florida. This project provides datasets acquired on August 7 and 8, 2012, for a portion of the Chandeleur Islands, Louisiana. An innovative airborne lidar system, known as the second-generation Experimental Advanced Airborne Research Lidar ( EAARL -B), was used during data acquisition. The EAARL -B system is a raster-scanning, waveform-resolving, green-wavelength (532-nanometers) lidar designed to map nearshore bathymetry, topography, and vegetation structure simultaneously. For more information about similar projects, please visit the Lidar for Science and Resource Management Web site.

Louisiana↗

USGS2021

System characterization report on the WorldView-3 Imager

Executive Summary This report addresses system characterization of the Maxar WorldView-3 satellite and is part of a series of system characterization reports produced and delivered by the U.S. Geological Survey Earth Resources Observation and Science Cal/Val Center of Excellence in 2020. These reports present and detail the methodology and procedures for characterization; present technical and operational information about the specific sensing system being evaluated; and provide a summary of test measurements, data retention practices, data analysis results, and conclusions. WorldView-3 is a high-resolution multispectral satellite launched in 2014 by Maxar Technologies on an Atlas V launch vehicle from Vandenberg Air Force Base in California for Earth resources monitoring. WorldView-3 provides substantial technical improvements to previous WorldView satellites, including spectral bands, ground sample distance, and swath. The WorldView-3 satellite was designed and built by Lockheed Martin for Maxar Technologies using the BCP–5000 bus with the WorldView-3 Imager and the Clouds, Aerosols, Vapors, Ice, and Snow sensor. The high-resolution WorldView-3 Imager is the main instrument, and the Clouds, Aerosols, Vapors, Ice, and Snow sensor provides additional data on obscurants and other atmospheric effects used in data production. More information on Maxar WorldView satellites and sensors is available within the “2020 Joint Agency Commercial Imagery Evaluation—Remote Sensing Satellite Compendium” and from the manufacturer at https://www.maxar.com/ . The Earth Resources Observation and Science Cal/Val Center of Excellence system characterization team completed data analyses to characterize the geometric (interior and exterior), radiometric, and spatial performances. Results of these analyses indicate that WorldView-3 has a range of interior geometric performance of −0.09 (−0.07 pixel) to 0.24 meter (0.19 pixel) in band-to-band registration; an exterior geometric performance in the range of a −21.10- (−2.11 pixels) to 28.23-meter (2.82 pixels) offset in comparison to Sentinel-2; a radiometric performance in the range of −0.121 to 1.420 (offset and slope); and a spatial performance in the range of 1.2 to 1.7 pixels at full width at half maximum with a modulation transfer function at a Nyquist frequency in the range of 0.093 to 0.185.

Open-File Report↗

USGS2012

Use of vertical temperature gradients for prediction of tidal flat sediment characteristics

Sediment characteristics largely govern tidal flat morphologic evolution; however, conventional methods of investigating spatial variability in lithology on tidal flats are difficult to employ in these highly dynamic regions. In response, a series of laboratory experiments was designed to investigate the use of temperature diffusion toward sediment characterization. A vertical thermistor array was used to quantify temperature gradients in simulated tidal flat sediments of varying compositions. Thermal conductivity estimates derived from these arrays were similar to measurements from a standard heated needle probe, which substantiates the thermistor methodology. While the thermal diffusivities of dry homogeneous sediments were similar, diffusivities for saturated homogeneous sediments ranged approximately one order of magnitude. The thermal diffusivity of saturated sand was five times the thermal diffusivity of saturated kaolin and more than eight times the thermal diffusivity of saturated bentonite. This suggests that vertical temperature gradients can be used for distinguishing homogeneous saturated sands from homogeneous saturated clays and perhaps even between homogeneous saturated clay types. However, experiments with more realistic tidal flat mixtures were less discriminating. Relationships between thermal diffusivity and percent fines for saturated mixtures varied depending upon clay composition, indicating that clay hydration and/or water content controls thermal gradients. Furthermore, existing models for the bulk conductivity of sediment mixtures were improved only through the use of calibrated estimates of homogeneous end-member conductivity and water content values. Our findings suggest that remotely sensed observations of water content and thermal diffusivity could only be used to qualitatively estimate tidal flat sediment characteristics.

Journal of Geophysical Research C: Oceans↗

USGS2019

Near-field remote sensing of Alaskan Rivers

The U.S. Geological Survey (USGS) Geomorphology and Sediment Transport Laboratory (GSTL), in collaboration with the U.S. Army Corps of Engineers Cold Regions Research and Engineering Laboratory (CRREL), acquired remotely sensed data from several Alaskan rivers in 2017 and 2018 with the goal of developing a methodology for measuring streamflow from a helicopter. CRREL operates a custom airborne lidar system that can be deployed in a helicopter-based pod (HeliPod). Data were collected with the HeliPod near existing USGS streamflow information stations on the Knik, Matanuska, Chena, and Salcha Rivers in both 2017 and 2018. Sites on the Tanana and Snow Rivers were added in 2018. In 2018, the HeliPod was modified to accommodate both a thermal infrared and a visible camera. The cameras were integrated with the flight management software to simultaneously acquire imagery with lidar. The Global Navigation Satellite System (GNSS) and inertial measurement unit (IMU) in the HeliPod were used to compute trajectories with precise position and orientation information needed for image orthorectification. The HeliPod sensors provide data for measuring river channel characteristics. Lidar can map the elevation of the water surface and thus be used to measure water-surface slopes and return intensity can be used to delineate the extent of the wetted river channel. Various approaches are currently being evaluated to estimate surface flow velocity from visible and thermal image time series. In this paper, we examine and compare water-surface elevation returns and slopes derived from the HeliPod lidar and found good agreement with measurements made using conventional field-based techniques.

Alaska↗

USGS2021

Satellite-derived barrier response and recovery following natural and anthropogenic perturbations, northern Chandeleur Islands, Louisiana

The magnitude and frequency of storm events, relative sea-level rise (RSLR), sediment supply, and anthropogenic alterations drive the morphologic evolution of barrier island systems, although the relative importance of any one driver will vary with the spatial and temporal scales considered. To explore the relative contributions of storms and human alterations to sediment supply on de-cadal changes in barrier landscapes, we applied Otsu’s thresholding method to multiple satel-lite-derived spectral indices for coastal land-cover classification and analyzed Landsat satellite imagery to quantify changes to the northern Chandeleur Islands barrier system since 1984. This high temporal-resolution dataset shows decadal-scale land-cover oscillations related to storm–recovery cycles, suggesting that shorter and (or) less resolved time series are biased toward storm impacts and may significantly overpredict land-loss rates and the timing of barrier mor-phologic state changes. We demonstrate that, historically, vegetation extent and persistence were the dominant controls on alongshore-variable landscape response and recovery following storms, and are even more important than human-mediated sediment input. As a result of exten-sive vegetation losses over the past few decades, however, the northern Chandeleur Islands are transitioning to a new morphologic state in which the landscape is dominated by intertidal envi-ronments, indicating reduced resilience to future storms and possibly rapid transitions in mor-phologic state with increasing rates of RSLR.

Louisiana↗

USGS2012

Large-area landslide detection and monitoring with ALOS/PALSAR imagery data over Northern California and Southern Oregon, USA

Multi-temporal ALOS/PALSAR images are used to automatically investigate landslide activity over an area of ~ 200 km by ~ 350 km in northern California and southern Oregon. Interferometric synthetic aperture radar (InSAR) deformation images, InSAR coherence maps, SAR backscattering intensity images, and a DEM gradient map are combined to detect active landslides by setting individual thresholds. More than 50 active landslides covering a total of about 40 km 2 area are detected. Then the short baseline subsets (SBAS) InSAR method is applied to retrieve time-series deformation patterns of individual detected landslides. Down-slope landslide motions observed from adjacent satellite tracks with slightly different radar look angles are used to verify InSAR results and measurement accuracy. Comparison of the landslide motion with the precipitation record suggests that the landslide deformation correlates with the rainfall rate, with a lag time of around 1–2 months between the precipitation peak and the maximum landslide displacement. The results will provide new insights into landslide mechanisms in the Pacific Northwest, and facilitate development of early warning systems for landslides under abnormal rainfall conditions. Additionally, this method will allow identification of active landslides in broad areas of the Pacific Northwest in an efficient and systematic manner, including remote and heavily vegetated areas difficult to inventory by traditional methods.

California, Oregon↗

USGS2012

Landsat 4 Thematic Mapper calibration update

The Landsat 4 Thematic Mapper (TM) collected imagery of the Earth's surface from 1982 to 1993. Although largely overshadowed by Landsat 5 which was launched in 1984, Landsat 4 TM imagery extends the TM-based record of the Earth back to 1982 and also substantially supplements the image archive collected by Landsat 5. To provide a consistent calibration record for the TM instruments, Landsat 4 TM was cross-calibrated to Landsat 5 using nearly simultaneous overpass imagery of pseudo-invariant calibration sites (PICS) in the time period of 1988-1990. To determine if the radiometric gain of Landsat 4 had changed over its lifetime, time series from two PICS locations (a Saharan site known as Libya 4 and a site in southwest North America, commonly referred to as the Sonoran Desert site) were developed. The results indicated that Landsat 4 had been very stable over its lifetime, with no discernible degradation in sensor performance in all reflective bands except band 1. In contrast, band 1 exhibited a 12% decay in responsivity over the lifetime of the instrument. Results from this paper have been implemented at USGS EROS, which enables users of Landsat TM data sets to obtain consistently calibrated data from Landsat 4 and 5 TM as well as Landsat 7 ETM+ instruments.

IEEE Transactions on Geoscience and Remote Sensing↗

USGS2008

Methane hydrates

Gas hydrate is a solid, naturally occurring substance consisting predominantly of methane gas and water. Recent scientific drilling programs in Japan, Canada, the United States, Korea and India have demonstrated that gas hydrate occurs broadly and in a variety of forms in shallow sediments of the outer continental shelves and in Arctic regions. Field, laboratory and numerical modelling studies conducted to date indicate that gas can be extracted from gas hydrates with existing production technologies, particularly for those deposits in which the gas hydrate exists as pore-filling grains at high saturation in sand-rich reservoirs. A series of regional resource assessments indicate that substantial volumes of gas hydrate likely exist in sand-rich deposits. Recent field programs in Japan, Canada and in the United States have demonstrated the technical viability of methane extraction from gas-hydrate-bearing sand reservoirs and have investigated a range of potential production scenarios. At present, basic reservoir depressurisation shows the greatest promise and can be conducted using primarily standard industry equipment and procedures. Depressurisation is expected to be the foundation of future production systems; additional processes, such as thermal stimulation, mechanical stimulation and chemical injection, will likely also be integrated as dictated by local geological and other conditions. An innovative carbon dioxide and methane swapping technology is also being studied as a method to produce gas from select gas hydrate deposits. In addition, substantial additional volumes of gas hydrate have been found in dense arrays of grain-displacing veins and nodules in fine-grained, clay-dominated sediments; however, to date, no field tests, and very limited numerical modelling, have been conducted with regard to the production potential of such accumulations. Work remains to further refine: (1) the marine resource volumes within potential accumulations that can be produced through exploratory drilling programs; (2) the tools for gas hydrate detection and characterisation from remote sensing data; (3) the details of gas hydrate reservoir production behaviour through additional, well-monitored and longer duration field tests and (4) the understanding of the potential environmental impacts of gas hydrate resource development. The results of future production tests, in the context of varying market and energy supply conditions around the globe, will be the key to determine the ultimate timing and scale of the commercial production of natural gas from gas hydrates.

Book chapter↗

USGS2016

Assessing the role of climate and resource management on groundwater dependent ecosystem changes in arid environments with the Landsat archive

Groundwater dependent ecosystems (GDEs) rely on near-surface groundwater. These systems are receiving more attention with rising air temperature, prolonged drought, and where groundwater pumping captures natural groundwater discharge for anthropogenic use. Phreatophyte shrublands, meadows, and riparian areas are GDEs that provide critical habitat for many sensitive species, especially in arid and semi-arid environments. While GDEs are vital for ecosystem services and function, their long-term (i.e. ~ 30 years) spatial and temporal variability is poorly understood with respect to local and regional scale climate, groundwater, and rangeland management. In this work, we compute time series of NDVI derived from sensors of the Landsat TM, ETM +, and OLI lineage for assessing GDEs in a variety of land and water management contexts. Changes in vegetation vigor based on climate, groundwater availability, and land management in arid landscapes are detectable with Landsat. However, the effective quantification of these ecosystem changes can be undermined if changes in spectral bandwidths between different Landsat sensors introduce biases in derived vegetation indices, and if climate, and land and water management histories are not well understood. The objective of this work is to 1) use the Landsat 8 under-fly dataset to quantify differences in spectral reflectance and NDVI between Landsat 7 ETM + and Landsat 8 OLI for a range of vegetation communities in arid and semiarid regions of the southwestern United States, and 2) demonstrate the value of 30-year historical vegetation index and climate datasets for assessing GDEs. Specific study areas were chosen to represent a range of GDEs and environmental conditions important for three scenarios: baseline monitoring of vegetation and climate, riparian restoration, and groundwater level changes. Google's Earth Engine cloud computing and environmental monitoring platform is used to rapidly access and analyze the Landsat archive along with downscaled North American Land Data Assimilation System gridded meteorological data, which are used for both atmospheric correction and correlation analysis. Results from the cross-sensor comparison indicate a benefit from the application of a consistent atmospheric correction method, and that NDVI derived from Landsat 7 and 8 are very similar within the study area. Results from continuous Landsat time series analysis clearly illustrate that there are strong correlations between changes in vegetation vigor, precipitation, evaporative demand, depth to groundwater, and riparian restoration. Trends in summer NDVI associated with riparian restoration and groundwater level changes were found to be statistically significant, and interannual summer NDVI was found to be moderately correlated to interannual water-year precipitation for baseline study sites. Results clearly highlight the complementary relationship between water-year PPT, NDVI, and evaporative demand, and are consistent with regional vegetation index and complementary relationship studies. This work is supporting land and water managers for evaluation of GDEs with respect to climate, groundwater, and resource management.

Remote Sensing of Environment↗

USGS2014

Earth observation based assessment of the water production and water consumption of Nile Basin agro-ecosystems

The increasing competition for water resources requires a better understanding of flows, fluxes, stocks, and the services and benefits related to water consumption. This paper explains how public domain Earth Observation data based on Moderate Resolution Imaging Spectroradiometer (MODIS), Second Generation Meteosat (MSG), Tropical Rainfall Measurement Mission (TRMM) and various altimeter measurements can be used to estimate net water production (rainfall (P) > evapotranspiration (ET)) and net water consumption (ET > P) of Nile Basin agro-ecosystems. Rainfall data from TRMM and the Famine Early Warning System Network (FEWS-NET) RainFall Estimates (RFE) products were used in conjunction with actual evapotranspiration from the Operational Simplified Surface Energy Balance (SSEBop) and ETLook models. Water flows laterally between net water production and net water consumption areas as a result of runoff and withdrawals. This lateral flow between the 15 sub-basins of the Nile was estimated, and partitioned into stream flow and non-stream flow using the discharge data. A series of essential water metrics necessary for successful integrated water management are explained and computed. Net water withdrawal estimates (natural and humanly instigated) were assumed to be the difference between net rainfall (P net ) and actual evapotranspiration (ET) and some first estimates of withdrawals—without flow meters—are provided. Groundwater-dependent ecosystems withdraw large volumes of groundwater, which exceed water withdrawals for the irrigation sector. There is a strong need for the development of more open-access Earth Observation databases, especially for information related to actual ET. The fluxes, flows and storage changes presented form the basis for a global framework to describe monthly and annual water accounts in ungauged river basins.

Remote Sensing↗

USGS2005

Lag and seasonality considerations in evaluating AVHRR NDVI response to precipitation

Assessment of the relationship between the normalized difference vegetation index (NDVI) and precipitation is important in understanding vegetation and climate interaction at a large scale. NDVI response to precipitation, however, is difficult to quantify due to the lag and seasonality effects, which will vary due to vegetation cover type, soils and climate. A time series analysis was performed on biweekly NDVI and precipitation around weather stations in the northern and central U.S. Great Plains. Regression models that incorporate lag and seasonality effects were used to quantify the relationship between NDVI and lagged precipitation in grasslands and croplands. It was found that the time lag was shorter in the early growing season, but longer in the mid- to late-growing season for most locations. The regression models with seasonal adjustment indicate that the relationship between NDVI and precipitation over the entire growing season was strong, with R 2 values of 0.69 and 0.72 for grasslands and croplands, respectively. We conclude that vegetation greenness can be predicted using current and antecedent precipitation, if seasonal effects are taken into account.

Photogrammetric Engineering and Remote Sensing↗

USGS2021

Applications of bistatic radar to volcano topography – A review of 10 years of TanDEM-X

The TanDEM-X satellite mission has revolutionized DEM generation from spaceborne synthetic aperture radar. In addition to the primary objective of generating a consistent digital elevation model with global coverage and unprecedented accuracy, the mission has acquired time series of topographic data over several volcanoes, providing an excellent opportunity to test the use of this innovative dataset for volcano monitoring and research. In this article, we review the utilization of the single-pass TanDEM-X data for studying various kinds of volcanic activity, such as basaltic lava flows, the formation and destruction of lava domes and related pyroclastic density currents, and subsurface magma withdrawal and intrusion. We then consider the uses of these data for hazard assessment and forecasting. Our goal is to highlight the importance of timely and repeated topographic information in volcanology, and to suggest the development of future spaceborne bistatic synthetic aperture radar satellite missions, such as ESA's Earth Explorer 10 candidate mission, “Harmony.”

IEEE Journal of Selected Topics in Applied Earth O↗

USGS2023

System characterization report on the Pléiades Neo Imager

Executive Summary This report addresses system characterization of the Pléiades Neo satellite and is part of a series of system characterization reports produced and delivered by the U.S. Geological Survey Earth Resources Observation and Science Cal/Val Center of Excellence. These reports present and detail the methodology and procedures for characterization; present technical and operational information about the specific sensing system being evaluated; and provide a summary of test measurements, data retention practices, data analysis results, and conclusions. Pléiades Neo is a constellation of four identical very-high-resolution optical satellites operated by Airbus Defence and Space. The first two satellites, Pléiades Neo-3 and -4, were launched in April and August 2021, respectively. The next two satellites, launched in December 2022, did not reach orbit because of Vega-C launch vehicle failure. Pléiades Neo provides several technical improvements to previous Pléiades-HR satellites, including the addition of coastal aerosol (deep blue) and red edge spectral bands, with improved ground sample distance and swath. The Pléiades Neo satellites were designed and built by Airbus Defence and Space with the high-resolution, multispectral imager for Earth imaging and use the S950 optical satellite bus. The high-resolution sensor on Pléiades Neo collects Earth data in the visible and near-infrared region with six bands and a panchromatic band. The satellites can operate off nadir to achieve a revisit of less than 1 day. More information on Pléiades Neo satellites and sensors is available in the “Land Remote Sensing Satellites Online Compendium” ( https://calval.cr.usgs.gov/apps/compendium# ) and from the manufacturer ( https://www.intelligence-airbusds.com/imagery/constellation/pleiades-Neo/ ). The Earth Resources Observation and Science Cal/Val Center of Excellence system characterization team completed data analyses to characterize the geometric (interior and exterior), radiometric, and spatial performances. Results of these analyses indicate that Pléiades Neo has an interior geometric performance in the range of 0.01 meter (m; 0.008 pixel) to −0.017 m (−0.014 pixel) in band-to-band registration; an exterior geometric performance in the range of −7.015 m (−0.702 pixel) to 3.846 m (0.385 pixel) offset in comparison to Sentinel-2 using ground control points of 2.2 to 7.2 m (95-percent circular error); a radiometric performance in the range of −0.070 (minimum) to −0.053 (maximum) in offset and 1.107 (minimum) to 1.202 (maximum) in slope; and a spatial performance in the range of 1.002 to 1.226 pixels at full width at half maximum with a modulation transfer function at a Nyquist frequency in the range of 0.22 to 0.34 (bands 2–7).

Open-File Report↗

USGS2024

System characterization report on Vision-1

Executive Summary This report addresses system characterization of the Airbus Vision-1 satellite and is part of a series of system characterization reports produced and delivered by the U.S. Geological Survey Earth Resources Observation and Science Cal/Val Center of Excellence. These reports present and detail the methodology and procedures for characterization; present technical and operational information about the specific sensing system being evaluated; and provide a summary of test measurements, data retention practices, data analysis results, and conclusions. Vision-1 is a high-resolution Earth observation satellite launched in September 2018 as a collaborative effort between Airbus and Surrey Satellite Technology Ltd. It features a Newtonian telescope with a refractive relay, capturing images in panchromatic and multispectral bands. Operating in a Sun-synchronous orbit at an altitude of 583 kilometers, Vision-1 ensures consistent illumination conditions during image acquisition. It has a revisit time of 1 to 8 days depending on latitude and viewing angle, and it features an off-pointing agility of plus or minus 45 degrees, allowing for multiple target captures in a single pass using spot, strip, and mosaic imaging modes. The panchromatic band offers a resolution of 0.87 meter (m), whereas the multispectral bands (blue, green, red, and near infrared) provide a resolution of 3.48 m. These capabilities support a variety of applications including urban planning, agricultural monitoring, land classification, natural resource management, and disaster response. More information on the Vision-1 satellite and sensors is available in the “2022 Joint Agency Commercial Imagery Evaluation—Remote Sensing Satellite Compendium.” The Earth Resources Observation and Science Cal/Val Center of Excellence system characterization team completed data analyses to characterize the geometric (interior and exterior), radiometric, and spatial performances. Results of these analyses indicate that the Vision-1 satellite has an interior geometric performance in the range of 0 to 0.02 m in easting and −0.01 to 0.03 m in northing in band-to-band registration, an exterior geometric performance of 1.7 to 2.2 m in easting and −1.1 to −0.7 m in northing offset with a 90-percent circular error of 3.4 to 3.7 m, a radiometric performance in the range of −0.029 to 0.017 in offset and 0.884 to 0.984 in slope, and a spatial performance in the range of 0.992 to 1.092 pixels for multispectral full width at half maximum and 1.895 pixels for the panchromatic band full width at half maximum, with a modulation transfer function at a Nyquist frequency in the range of 0.29 to 0.36 for the multispectral bands and 0.05 for the panchromatic band.

Open-File Report↗