USGS Science⌕ Search

SEARCH · USGS Science

Results for “Reviews in Fish Biology and Fisheries”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

1,676 records · Page 19Linked to original sources
USGS2025

The systematics of stable hydrogen (δ2H) and oxygen (δ18O) isotopes and tritium (3H) in the hydrothermal system of the Yellowstone Plateau volcanic field, USA

To improve our understanding of hydrothermal activity on the Yellowstone Plateau volcanic field, we collected and analyzed a large data set of δ 2 H, δ 18 O, and the 3 H concentrations of circum-neutral and alkaline waters. We find that (a) hot springs are fed by recharge throughout the volcanic plateau, likely focused through fractured, permeable tuff units. Previous work had stressed the need for light δ 2 H water recharge restricted to the northern part of the plateau or recharge during past cold periods. However, new data from the Y-7 drill hole suggests that recharge is not restricted to a certain area or a cold period. (b) δ 18 O values of thermal waters in the geyser basins are shifted from the global meteoric water line by temperature-dependent water-rock reactions with higher subsurface temperatures resulting in a greater shift. (c) Large temporal variations in the isotopic composition of meteoric water recharge and small temporal variability in the isotopic composition of hot spring discharge implies that the volume of groundwater in, and around the Yellowstone caldera is substantially larger than the volume of annual water recharge. (d) Hot springs discharged through different rhyolitic units correlate with identifiable differences in δ 2 H and δ 18 O compositions, 3 H concentrations, and water chemistry that imply equilibration at different temperatures and travel along different flow paths. (e) Based on measured 3 H concentrations, we calculate that hot spring waters in the central part of the geyser basins mostly contain <2% post-1950 meteoric water, whereas waters discharged at the basin margins contain larger fractions of post-1950s meteoric water.

Wyoming↗
USGS2025

Earthquake stress-drop values delineate spatial variations in maximum shear stress in the Japanese forearc lithosphere

Earthquake stress drop (Δσ) may increase with depth and stress in the brittle lithosphere. However, the range of uncertainty in Δσ and the lack of constraints on absolute stress make it difficult to establish whether they are correlated. Here, we investigate Δσ dependence on depth and maximum shear stress ( τ max ) based on ~11 years of seismicity in the northeastern Japanese forearc following the 2011 Tohoku-Oki megathrust earthquake. We interpret Δσ estimates computed using both individual spectra and spectral-ratio methods and find that Δσ exhibits a clear depth dependence within the seismically active upper ~60 km of the forearc lithosphere ( ~ 0.8 MPa per 10 km). We further compare Δσ values with quantitative τ max estimates from finite-element models of force balance. We find that median Δσ values increase with τ max in the brittle forearc lithosphere and that earthquake stress release is proportional to τ max . The dependence of Δσ on τ max explains the apparent depth dependence of Δσ and suggests that average Δσ values provide a relative measure of the stress at failure. In the northeastern Japanese forearc, Δσ values remained roughly constant in the decade following the Tohoku-Oki earthquake, suggesting negligible changes in failure stress in the forearc since the mainshock.

Communications Earth and Environment↗
USGS2025

The influence of pre-existing structures on geothermal springs: Inferences from potential field mapping in Surprise Valley, CA and other sites In the northwestern Great Basin

Surprise Valley, located in the northwestern Great Basin, is an asymmetric extensional basin that marks a major tectonic transition between the relatively un-extended volcanic Modoc Plateau to the west, and the Basin and Range to the east that has undergone 10-15% extension. In addition, it sits just north of the Walker Lane which accommodates up to 20% of dextral slip associated with Pacific-North American plate interactions. Thermal springs issue from eight areas within Surprise Valley. Most of these occur within the basin and are not situated on the main basin forming range-front faults. As a result, efforts to resolve the structural setting of the valley’s hydrothermal system have relied on geophysics to characterize basin structure and geology. Extensive efforts to map the basin with ground and airborne magnetics have revealed a >35 km-long linear, intra-basin magnetic high, interpreted as a buried dike swarm. Geothermal springs on the eastern side of the valley, including Seifert hot springs, Leonards hot springs, and Surprise Valley hot springs (SVHS), are all situated along the magnetic high and occur at local breaks and bends in the anomaly, suggesting that fracture permeability is enhanced along the feature and particularly at these discontinuities. Recent studies, including drilling over the anomaly near SVHS that likely intersected dike material, as well as subsequent mapping and sampling of dikes outcropping along the anomaly on the playa surface south of SVHS, confirm (as previously inferred) that mafic intrusives are the principal source of the anomaly. Similar interpretations made in two other valleys (in southern Oregon and northwestern Nevada), where inferred intra-basin dikes appear to be spatially correlated with hot springs or prospective geothermal resource areas, suggest that the impact of pre-existing basement structure on hydrothermal activity may pertain more generally to other hydrothermal settings throughout the Great Basin. If so, efforts to map basement may enhance understanding structural controls on some geothermal systems. Furthermore, similarities across these disparate sites suggest that magmatism may play a much larger role in accommodating extension and influencing basin evolution across the western Great Basin than previously recognized.

Conference Paper↗
USGS2024

Use of a numerical groundwater-flow model and projected climate scenarios to simulate the effects of future climate conditions on base flow for reach 1 of the Washita River alluvial aquifer and Foss Reservoir storage, western Oklahoma

To better understand the relation between climate variability and future groundwater resources in reach 1 of the Washita River alluvial aquifer and Foss Reservoir in western Oklahoma, the U.S. Geological Survey, in cooperation with the Bureau of Reclamation, used a previously published numerical groundwater-flow model and climate-model data to investigate changes in base flow and reservoir storage by evaluating three scenarios. The three projected climate scenarios were (1) a central-tendency scenario, (2) a warmer/drier scenario, and (3) a less-warm/wetter scenario. To estimate future base flow and groundwater availability in western Oklahoma, specifically in reach 1 of the Washita River alluvial aquifer, downscaled climate-model data from 231 Coupled Model Intercomparison Project phase 5 (CMIP5) projections coupled with a previously published numerical groundwater-flow model were used to compare the effects of different climate scenarios on the aquifer. Changes in base flow and groundwater-level elevations during a 30-year baseline scenario (1985–2014) and the three 30-year projected climate scenarios (2050–79) under central-tendency, warmer/drier, and less-warm/wetter climatic conditions were assessed by using the calibrated model. In the simulations, the amount of base flow and reservoir storage declined in the central-tendency and warmer/drier scenarios compared to the amount of base flow and reservoir storage under historical climatic conditions (baseline scenario). Mean annual change in reservoir storage decreased from the baseline scenario the most in the warmer/drier scenario, followed by the central-tendency scenario, but increased in the less-warm/wetter scenario compared to the baseline scenario. At the end of the simulation period (2079), the largest magnitude differences in groundwater-level elevations in all three projected climate scenarios relative to the baseline scenario occurred upstream from Foss Reservoir. Results from incorporating downscaled climate projections into localized numerical groundwater-flow models can highlight potential future changes in and implications for groundwater resources and availability.

Oklahoma↗
USGS2026

Regional characterization of coal resources in the Gulf Coast Coal Region—In support of coal as a potential source for critical minerals and rare earth elements

There is increasing interest in extracting critical minerals (CM), including rare earth elements (REE), from coals in the United States to address the overreliance on imported REE. The Gulf Coast and the Fort Union regions are the two major lignite-bearing regions within the United States. Recent REE and CM studies of the lignite in these regions have indicated that the coals may be a viable source material for REE and CM extraction. To evaluate in-place coal as a potential source of REE and CM, the coal resources need to be quantified. This study presents the results of a regional analysis of Gulf Coast Coal Region lignite and bituminous coal resources that might be available as potential sources of REE and CM. The resource analysis used kriging methods to develop isopleth maps of cumulative coal thickness throughout the region using data from drill holes and measured mine and outcrop sections for a total of 31,181 data points. The estimated total remaining coal resource in the Gulf Coast Coal Region is about 83 billion metric tons in the upper 90 meters (approximately 300 feet) of the subsurface. The current estimate of remaining coal resources includes approximately 1.88 billion metric tons of coal that have been extracted in the region since 1983. Texas accounted for 39 percent (32 billion metric tons) of the remaining total resource, followed by Mississippi (24 percent, 20 billion metric tons ), Louisiana (14 percent, 12 billion metric tons), Tennessee (10 percent, 8.5 billion metric tons), and Arkansas (6 percent, 5.1 billion metric tons). Alabama, Georgia, Kentucky, and Missouri each accounted for less than 5 percent of the total resource; Georgia had the smallest resource estimated at 7 million metric tons. Here we report the first known statewide lignite resource estimates for Georgia, Kentucky (820 million metric tons), and Missouri (1,800 million metric tons). A comparison of the results of this study with those of previous Gulf Coast Coal Region and Fort Union Coal Region resource studies is difficult because each study used different data sources, assessment methodologies, overburden depths, and qualifying coal thicknesses.

Alabama, Arkansas, Florida, Georgia, Illinois, Lou↗
USGS2025

The role of bedrock circulation depth and porosity in mountain streamflow response to prolonged drought

Quantitative understanding is lacking on how the depth of active groundwater circulation in bedrock affects mountain streamflow response to a multi‐year drought. We use an integrated hydrological model to explore the sensitivity of a variety of streamflow metrics to bedrock circulation depth and porosity under a plausible extreme drought scenario lasting up to 5 years. Endmember depth versus hydraulic conductivity relationships and porosity values for fractured crystalline rock are simulated. With drought, a deeper circulation system with higher drainable porosity more effectively buffers minimum flow and significantly limits perennial stream loss in comparison to a shallow circulation system. Streamflow buffering is accomplished through extensive groundwater storage loss. However, deeper circulation systems experience prolonged recovery from drought in comparison to storage‐limited shallow systems. Research highlights the importance of characterizing the deeper bedrock hydrogeology in mountainous watersheds to better understand and predict drought impacts on stream ecosystem health and water resource sustainability.

Colorado↗
USGS2026

Recycling radiogenic osmium by crustal foundering in subduction zones: Evidence from pyroxenite xenoliths in the north Andean arc

Removal of mafic-ultramafic lower crust (e.g., via delamination) is fundamental to making andesitic continental crust, yet direct evidence of this process remains elusive. A unique suite of garnet clinopyroxenite and hornblendite (arclogite) xenoliths from the northern volcanic zone of the Andes, erupted to the surface in the mid-Pleistocene, have bulk-rock geochemistry and osmium (Os) isotopic compositions that demonstrate their crustal affinity, yet have equilibration pressures and temperatures below the arc Mohorovičić discontinuity (~53 km) and some as deep as within the sub-arc mantle wedge (~105 km). Garnet websterites from the same xenolith suite, sourced from depths approaching the Wadati-Benioff zone (~140 km), have elemental and isotopic compositions indicative of a mantle origin, likely formed as products of peridotite-liquid reactions above the subducting slab. Variability in bulk-rock 143 Nd/ 144 Nd values and garnet oxygen isotope ratios ( 𝛿 18 O) for these samples is attributed to minor assimilation of subducted components and/or older crustal material, but assimilation alone cannot account for the highly radiogenic Os isotopic compositions. These results provide direct petrologic evidence for modern arclogite formation and foundering in the Andean orogen, the archetypal active continental subduction system. Elevated 187 Os/ 188 Os values of Mercaderes arclogites imply that recycling of gravitationally unstable arc cumulates during continental crust formation introduces highly radiogenic Os into the convective mantle, which has implications for mass fluxes across the crust-mantle boundary as well as the sources and evolution of mantle heterogeneity as seen in orogenic peridotite massifs and in the sources of oceanic basalts

Earth and Planetary Science Letters↗
USGS2025

Assessment of western Oregon debris-flow hazards in burned and unburned environments

In the steep and mountainous environment of western Oregon, debris flows pose a considerable threat to property, infrastructure and life. Wildfire is commonly known to increase the susceptibility of steep slopes to debris flows, but the extent of this process in the western Cascades is not well understood. The US Geological Survey (USGS) currently estimates postfire debris-flow likelihood and triggering rainfall thresholds using a model calibrated to a southern California inventory of debris flows generated by excess runoff within the first year after fire. Because of a lack of available data, this model has not been tested in western Oregon, or in locations where postfire debris flows initiate via other mechanisms (e.g., shallow landslides or in-channel failures). Using repeat field observations and aerial imagery, we developed two new debris-flow inventories within and adjacent to the perimeters of five 2020 wildfires in western Oregon: Archie Creek, Holiday Farm, Beachie Creek, Lionshead and Riverside. The first inventory focuses on postfire debris flows (2020–2022); the second focuses on debris flows prior to fires (1995–2020). Our inventories of prefire and postfire debris flows were used to document initiation mechanisms in Oregon's western Cascades and to evaluate the effects of wildfire. We found that wildfire changed the distribution of debris-flow initiation mechanisms in the western Cascades. After the wildfires, annual rates of runoff-generated debris flows increased by 22% and the number of shallow landslide-initiated debris flows decreased by 17% relative to before the wildfires. Despite this shift, shallow landsliding was the dominant debris-flow initiation mechanism in both unburned and burned environments. We found the performance of the current USGS debris-flow likelihood model was degraded relative to other previously tested locations across the intermountain western United States. Our results highlight the need for improved postfire hazard assessment in western Oregon based on regional model calibration that is tuned to the dominant debris-flow initiation mechanisms.

Oregon↗
USGS2000

Use of a ground-penetrating radar system to detect pre- and post-flood scour at selected bridge sites in New Hampshire, 1996-98

Ground-penetrating radar was used to measure the depth and extent of existing and infilled scour holes and previous scour surfaces at seven bridges in New Hampshire from April 1996 to November 1998. Ground-penetrating-radar survey techniques initially were used by the U.S. Geological Survey to study streambed scour at 30 bridges. Sixteen of the 30 bridges were re-surveyed where floods exceeded a 2-year recurrence interval. A 300-megahertz signal was used in the ground-penetrating radar system that penetrated through depths as great as 20 feet of water and as great as 32 feet of streambed materials. Existing scour-hole dimensions, infilled thickness, previous scour surfaces, and streambed materials were detected using ground-penetrating radar. Depths to riprap materials and pier footings were identified and verified with bridge plans. Post data-collection-processing techniques were applied to assist in the interpretation of the data, and the processed data were displayed and printed as line plots. Processing included distance normalization, migration, and filtering but processing was kept to a minimum and some interference from multiple reflections was left in the record. Of the 16 post-flood bridges, 22 ground-penetrating-radar cross sections at 7 bridges were compared and presented in this report. Existing scour holes were detected during 1996 (pre-flood) data collection in nine cross sections where scour depths ranged from 1 to 3 feet. New scour holes were detected during 1998 (post-flood) data collection in four cross sections where scour depths were as great as 4 feet deep. Infilled scour holes were detected in seven cross sections, where depths of infilling ranged from less than 1 to 4 feet. Depth of infilling by means of steel rod and hammer was difficult to verify in the field because of cobble and boulder streambeds or deep water. Previous scour surfaces in streambed materials were identified in 15 cross sections and the depths to these surfaces ranged from 1 to 10 feet below the streambed. Riprap materials or pier footings were identified in all cross sections. Calculated record depths generally agree with bridge plans. Pier footings were exposed at two bridges and steel pile was exposed at one bridge. Exposures were verified by field observations.

New Hampshire↗
USGS2024

Simulation of groundwater flow in the Long Island, New York regional aquifer system for pumping and recharge conditions from 1900 to 2019

The U.S. Geological Survey has developed a transient, groundwater-flow model that simulates hydrologic conditions in the Long Island aquifer system as part of an ongoing (since 2016) multiyear, cooperative investigation with the New York State Department of Environmental Conservation. The goals of this investigation are to assist stakeholders and resource managers to evaluate the response of the hydrologic system to changes in future hydraulic stresses. Responses in the hydrologic system include changes in water levels in the hydrogeologic units; discharge to streams, coastal waters, and subsurface infrastructure; and the extent of saline groundwater in the aquifers. Hydraulic stresses include future water-supply management and changes in land use and infrastructure. The numerical model synthesizes a diverse set of physiographic, geologic, climatic, land-use, and historical population, water use, and infrastructure data to physically represent the Long Island aquifer system from land surface to bedrock and to simulate annual hydrologic conditions between 1900 and 2019. A three-dimensional hydrogeologic framework was developed from existing and recently collected borehole geologic and geophysical data collected as part of a companion drilling program. Water-transmitting properties of the principal aquifer sediments were defined in three dimensions from new and existing lithologic logs. The distribution of recharge from precipitation was estimated from landscape characteristics and climate data. Anthropogenic recharge from wastewater, leaky infrastructure, and storm runoff were estimated from population, infrastructure, and pumping data. Water-use data, including well locations, depths, and pumping rates, were obtained from historical sources and records and used to estimate pumping stresses continuously in time and space, at an annual average time scale. The data were incorporated into a three-dimensional numerical model using the U.S. Geological Survey finite difference modeling code MODFLOW 6; the model encompassed all of Long Island and surrounding surface waters and simulated historical hydrologic conditions from 1900 to 2019. The calibration process involved trial and error adjustments using prior knowledge to improve general fit to observations followed by an inverse calibration to update and optimize input parameters, using an iterative ensemble smoother algorithm implemented in PEST++ version 5.0. This resulted in a model that generally was in good agreement with observed, dynamically varying hydrologic conditions from 1900 to 2019. The calibrated model was used to develop two base-case models for scenario testing of future, hypothetical conditions where one represented average-annual conditions, and one represented average-seasonal conditions from 2010 to 2019. The model representing average-annual conditions was modified further to represent an alternate sea-level position of 6 feet above the North American Vertical Datum of 1988, and the model representing average-seasonal conditions was modified to represent the average seasonal effects of a 5-year drought imposed upon current hydrologic conditions. Recharge is the sole source of water to the aquifer system; groundwater discharges to coastal water and streams and is withdrawn by pumped wells. Model-estimated annual recharge ranged from about 11 inches in 1965 to 41 inches in 1983. On average, from 2010 to 2019, about 23 percent of water was pumped from wells, and about 47 and 27 percent discharged to coastal waters and streams, respectively; the remaining 4 percent was water that moved into storage in the aquifer matrix. Water levels on Long Island vary naturally during time in response to changes in recharge; the amount of variation is largest in the interior of the island, in areas with highest water table altitudes near groundwater divides and lowest near streams and the coastal waters. The total range of water table altitudes on Long Island between 1900 and 2019 ranged from near 0 to more than 70 feet in western parts of Long Island. The largest range in altitudes is in New York City and is associated with areas of large historical withdrawals between the 1920s and the late 1980s. Water table altitudes generally varied by less than 10 feet in eastern Suffolk County, where the aquifer is under more natural conditions. Saltwater intrusion is of great concern on Long Island, particularly in western Long Island where both the unconfined and confined parts of the aquifer system have been intruded in response to large-scale groundwater withdrawals; however, the volume of freshwater in the islandwide aquifer system only has changed by about 5 percent between 1900 and 2019. The decadal change in the freshwater volume was largest during the early and mid-20th century, corresponding to the largest historical pumping, but that volume change did not exceed 1 percent. The negligible change in freshwater volume suggests that saltwater intrusion as of 2019 was limited at an islandwide scale but continues to occur in local areas of Queens and Nassau Counties, adversely affecting current water supplies and limiting future water supplies for affected communities. The regional groundwater model developed for this investigation is a tool that can be used to help determine the viability of current and future water supplies at a regional scale and can be used to support development of additional models at finer scale to support more focused assessments of groundwater sustainability.

New York↗
USGS2026

Widespread landslide activity in an extreme wet season and implications for regional sediment management, eastern San Francisco Bay area, California

Watershed sediment production is expected to increase in a warmer future with more extreme rain, with cascading effects throughout drainage and sediment-transport networks. This study investigated landscape-scale sediment movement in the eastern San Francisco Bay area, California, USA, during the extreme 2016–2017 wet season that brought major rainfall, landslides, and flooding. Mapping 8,928 landslides across a 1,050-km 2 study area revealed new sediment yield of 510–956 t/km 2 , equivalent to denudation of 193–361 mm/ky. These results correspond closely to long-term denudation rates in the northern and central California Coast Ranges, indicating that mass wasting in very wet years dominates long-term sediment mobilization. However, due to long residence times in drainage networks, the 2017 landslides contributed at most ∼1%–2% of the estimated locally derived fluvial sediment transport to San Francisco Bay. Although the amount of sediment mobilized did not threaten municipal water supplies, small rangeland impoundments in this mixed-use landscape lost storage capacity to new sedimentation. Considering regional sediment supply and demand, even the exceptionally large sediment delivery in an extreme wet year cannot meet the need for sediment to accrete tidal wetlands in the bay. To keep pace with rising sea levels, this abnormally high terrestrial sediment input would need to occur in 50 of the next 75 years, an unlikely occurrence due to the prevalence of recent drought years. Shoreline protection and restoration in the bay would need additional sources of sediment, such as through management of dredged sediment through beneficial-reuse programs.

California↗
USGS2026

Insights into Mountain Pass carbonatite formation from in-situ sulfur isotopes and geochemistry of sulfate and sulfide minerals

The Mountain Pass carbonatite stock hosts a world-class rare earth element deposit and may be classified as a carbonate-sulfate igneous rock, as it contains on average > 50 volume percent carbonate minerals and 20 to 30 volume percent sulfate minerals. The sulfates range in composition from barite to celestine and locally occur with sparse sulfide minerals. We investigate the origin of sulfur enrichment and the occurrence of sulfur-bearing minerals in the Mountain Pass carbonatite with in-situ sulfur isotope and mineral chemistry. Barite cores with δ 34 S of 1 to 3‰ do not coexist with sulfides, whereas celestine rims with δ 34 S of > 3‰ are associated with sulfides with δ 34 S < -10‰. We propose a model in which sulfur-bearing sediments were subducted during episodes of plate convergence in the Mojave Province that preceded Mountain Pass magmatism. Metasomatism of the overlying mantle by melts derived from the subducted sediments generated an unusually carbon- and sulfur-rich source to yield carbonatite magmas. Sulfur from primary carbonatite magmas and ~ 1 to 7% sulfur from subducted sediment melts yielded a slightly enriched δ 34 S composition (relative to depleted mantle δ 34 S of -1‰) for early crystallizing barite. Celestine rims on magmatic barite cores formed at low, hydrothermal temperatures (< 350 °C) based on S isotope thermometry for equilibrium celestine-galena and celestine-pyrite pairs. The sparse sulfides in the carbonatite stock are not in equilibrium with the primary barite cores and therefore do not permit S isotope thermometry estimates of magmatic temperatures. The S/Se ratios of sulfide minerals (> 3,400) typically exceed primitive mantle values (S/Se of 3,340), also consistent with their derivation from hydrothermal fluids. Trace occurrences of sulfide and sulfate minerals in alkaline silicate stocks related to the carbonatite stock have similar δ 34 S compositions and yield similarly low formation temperatures, suggesting regionally extensive and chemically similar sulfur-bearing hydrothermal fluids that imparted lithologically diverse rocks with a consistent sulfur isotope fingerprint.

California, Nevada↗
USGS2012

Development of vegetation based soil quality indices for mineralized terrane in arid and semi-arid regions

Soil quality indices (SQIs) are often management driven and attempt to describe key relationships between above- and below-ground parameters. In terrestrial systems, indices that were initially developed and modified for agroecosystems have been applied to non-agricultural systems in increasing number. We develop an SQI in arid and semi-arid ecosystems of the Western US impacted by different types of geologic mineralization using the relationship between vegetation community parameters and soil abiotic and biotic properties. We analyze these relations in soils associated with three different mineralization types: podiform chromite, Cu/Mo porphyry, and acid-sulfate gold vein systems at four different sites in California and Nevada. Soil samples were collected from undisturbed soils in both mineralized and nearby unmineralized substrates as well as from waste rock and tailings. Aboveground net primary productivity (ANPP), canopy cover and shrub density were measured for the vegetative communities. Minimum data sets were developed based on correlations between the soil and vegetation parameters, refined using principal components analysis, scored using non-linear functions, and combined into an overall SQI. The indices are comprised of one or two microbial parameters and three to six abiotic parameters, the latter consisting of nutrients and metals. Given the preliminary development of this approach, the parameters and combinations to arrive at an SQI for a given site cannot at this time be correlated or compared with that of another site. This SQI approach provides a means of quantifying disturbed ecosystem recovery resulting from mining, and could be applied to other disturbances in a way that readily distills the information for potential use by land managers. However, severely disturbed areas with little to no aboveground biomass, such as unreclaimed tailings, have likely crossed an ecological threshold that precludes the use of this type of monitoring tool.

California↗
USGS2026

Baseflow and snowmelt sustained streamflow in the Upper Colorado River Basin, 1986-2020

The Upper Colorado River Basin (UCRB) faces substantial water availability limitations. Although most streamflow originates as snowmelt, the partitioning of snowmelt between surface runoff and groundwater recharge and subsequent groundwater discharge to streams is highly uncertain. On average, over half of the streamflow in the UCRB is estimated to originate from groundwater discharge to streams, highlighting the importance of baseflow in sustaining surface water. However, the historical patterns of baseflow and streamflow, along with their variability over space and time and their specific sources, remain unknown at the basin scale. This study addresses those gaps by characterizing the sources and transport pathways of both baseflow and streamflow in the UCRB at a seasonal timestep from 1986 to 2020, including the lagged delivery of subsurface water to streams beyond the current season, using coupled models of baseflow and streamflow. Between 1986 and 2020, on average 63% of UCRB streamflow originated from baseflow. About half of this baseflow took longer than one season to reach streams, and outside the snowmelt season, baseflow was the dominant source of streamflow. Snowmelt was a key source of both baseflow and streamflow. Current season snowmelt contributed 33% of streamflow via runoff, and 22% of the 29% of streamflow that originated as current season baseflow via subsurface flow to streams. Over the study period, baseflow index (BFI) declined in headwaters and increased at mid-elevations. Springtime increases in BFI demonstrate the increasingly important role baseflow plays in water supply. Identifying the sources, locations, and timing of water that contributed to the UCRB outlet can inform management of water resources in the basin.

Arizona, Colorado, New Mexico, Utah, Wyoming↗
USGS2024

Ambient flow and transport in long-screened, sand-packed wells: Insights into cross contamination and wellbore flow

The presence of long-screened wells with a surrounding sand pack can have a major effect on the redistribution of contaminants in groundwater, particularly when the wells are set in low-hydraulic conductivity aquifers. Such redistribution, or cross contamination, can occur through vertical flow and advective transport or by in-well mixing via multiple non-advective transport processes. A multi-method approach, including the use of single borehole dilution tracer (SBDT) logging, was undertaken to estimate vertical transport of trichloroethylene (TCE) in 8 discontinued remedial extraction wells, all constructed with long screens (100 ft, or 30.6 m long) and surrounding sand packs, at Site 25, Edwards Air Force Base, California. The site is within an enclosed drainage basin that is underlain primarily by quartz-monzonite-granitic rocks in various states of weathering. Prior to this study, little information was available on the depths of fracture zones intersecting the wellbores. Results indicate that because of in-well mixing processes, a potential redistribution of TCE of up to 9 g/d per well occurs as a consequence of leaving the wells inactive (unpumped) and unsealed, as measured by SBDT logging. Simulations of flow made with a generic model of the site show that if the wells were to be sealed with well liners, with the intent of reducing vertical TCE transport but the sand pack left intact, TCE transport decreases by 53% overall compared to leaving the wells unlined.

Environmental Earth Sciences↗
USGS2026

Potential warming-induced changes in stream water sources between proglacial and non-glacial streams, south-central Alaska

Snow and ice-melt are essential for global water resources. Rising air temperatures are causing vegetation encroachment and shrubification of previously snow- and ice-covered landscapes, and precipitation regimes are changing. Collectively, these changes will likely affect the hydrology of mountain environments, although the exact ways in which the hydrology will change are poorly understood. Changing source waters (i.e., the proportion of ice-melt, snowmelt, rain and groundwater) affect the timing and magnitude of streamflow and affect stream temperature, sediment, solute and nutrient fluxes. We investigate spatial and seasonal source water contributions across sub-watersheds of the Nellie Juan River watershed on Alaska's Kenai Peninsula, which differ in glacier cover, elevation and land cover, using a space-for-time approach. To do so, we use a three-endmember mixing model to quantify the contribution of rain, snow/ice-melt and deep groundwater. We show that snow/ice-melt peak later in proglacial streams compared to non-glacial streams. Endmember contributions in non-glacial streams generally vary with elevation and season. We also found that groundwater is a major contributor to streamflow across the study area, contributing between 12% and 47% seasonally, and may become increasingly important as snowpack and ice-melt decrease. This research characterises the shift from a glacierised to a deglaciating landscape through the lens of source water contribution. Broadly, these findings could help improve understanding of how water resources in glacierised watersheds are affected by warming air temperatures.

Alaska↗
USGS1976

A comparison of electronic particle counting and pipette techniques in routine mud analysis

Electronic particle counting and pipette size-analysis techniques are compared for their relative effectiveness in large-scale routine mud analysis. Optimum laboratory procedures for conducting electronic analyses with a Model TA Coulter Counter are presented. Comparative electronic and pipette analyses conducted on the same samples resulted in equivalent precision for both techniques. Results of electronic analyses consistently showed size distributions significantly coarser than those obtained by pipette analyses. The laboratory efficiency of the relatively rapid electronic technique is far superior to that of the pipette technique, although more extensive precautionary measures are required to maintain a high level of analytical accuracy and precision. The quality of electronic analyses largely depends upon the effectiveness of standardized operational procedures established within the laboratory.

Open-File Report↗
USGS2025

Examining the role of elevated and sustained strain in dynamically triggering earthquakes on the Anza section of the San Jacinto fault

Microearthquakes can be dynamically triggered in southern California by remote earthquakes. However, directly connecting dynamic triggering mechanisms with observational data remains challenging. One proposed failure mechanism suggests that both the amplitude and duration of cyclic fatigue caused by the passing seismic wave contribute to triggering occurrence. Here, we measure dynamic strains recorded by borehole strainmeters in the Anza section of the San Jacinto fault zone from 710 earthquakes that occurred over 300 km away between 2008 and 2017 to systematically investigate the role of elevated and sustained strain in controlling dynamic triggering. We design a suite of tests to evaluate whether specific amplitude thresholds and durations of strain can predict dynamic triggering cases. We further test whether the peak dynamic strain (PDS) can predict triggering occurrence in combination with the strain amplitude and duration. Based on these tests, there is no strain amplitude–duration threshold that can distinguish triggering occurrence in Anza. Dynamic triggering is more likely to occur if a remote earthquake causes a PDS above 100 nanostrain, though many cases were triggered at smaller PDSs. The lack of clear correlation between triggering and characteristics of the dynamic strain field suggests that the tested features of the incoming waves do not determine triggering occurrence and local fault conditions and slip processes are more important in controlling dynamic triggering in Anza.

California↗