SEARCH · USGS Science

Results for “Journal of Geophysical Research, Earth Surface”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 343 records · Page 19Linked to original sources

USGS2012

Helium isotope and gas discharge variations associated with crustal unrest in Long Valley Caldera, California, 1989-1992

The onset of anomalous seismic activity in 1989 beneath Mammoth Mountain on the southwestern rim of the Long Valley caldera, California, was followed within ∼4 months by a large increase in 3 He/ 4 He in vapor discharged from a fumarole on the north side of the mountain. The helium isotopic ratio at this vent rose to a maximum of 6.7 RA in July 1990 and subsequently declined to values near 5 R A . Potential sources of the 3 He‐rich vapors include degassing of fresh magma, degassing from fresh surfaces generated in newly fractured igneous rocks, and volatile release from a 3 He‐rich gas chamber situated above previously emplaced intrusives. The magnitude of the increase in helium isotopic composition (from 3.8 to 6.7 R A ), the persistence of relatively high values (>5 R A ) over a period of 3 years, the increase in the flux of total He relative to gases in air‐saturated water, and the increases in the rates of discharge of steam and gas from this fumarole indicate that magmatic intrusion did in fact begin in 1989 beneath Mammoth Mountain. Seismic activity and limited measurements of extensional deformation at the surface suggest that the depth of intrusion may be as shallow as 2 km, consistent with the prompt appearance of increased 3 He/ 4 He ratios in the fumarolic gas, and that the intrusive process may have persisted for ∼1 year. In contrast, a similar combination of magmatic intrusion and anomalous seismic activity beneath the resurgent dome‐south moat region during the 1989–1991 period resulted in at most relatively small changes in 3 He/ 4 He in fumarolic discharge at the southern edge of the resurgent dome. The more subdued response may result from a combination of greater intrusive depths and greater dilution of 3 He‐rich inputs to thermal fluid reservoirs in the shallow hydrothermal system in this area compared with Mammoth Mountain.

California↗

USGS2012

Thin, low‐velocity crust beneath the southern Yukon‐Tanana Terrane, east central Alaska: Results from Trans‐Alaska crustal transect refraction/wide‐angle reflection data

A seismic refraction/wide‐angle reflection survey for the Trans‐Alaska Crustal Transect program reveals a thin, reflective crust beneath the southern Yukon‐Tanana terrane (YTT) in east central Alaska. These data are the first detailed refraction survey of the southern YTT and compose a 130‐km‐long reversed profile along the Alaska and Richardson highways. Results from this study indicate that low‐velocity (≤ 6.4 km/s) rocks extend to approximately 27 km in depth. Based on these low velocities and an average Poisson's ratio of 0.23 determined for depths of ≤27 km, an overall silicic composition is interpreted for this portion of the crust beneath the Yukon‐Tanana terrane. From approximately 8 to 27 km depth the crust exhibits an increase in reflectivity. This middle to lower crustal reflectivity is modeled as alternating high‐ and low‐velocity lamellae with an average velocity of 6.1 km/s at 10 km depth to an average velocity of 6.4 km/s at 27 km depth. Beneath these reflective, low‐velocity rocks a 3‐ to 5‐km‐thick, 7.0 km/s basal crustal layer produces a prominent reflection that extends to offsets of up to 280 km. The crust‐mantle boundary, modeled at an average depth of 30 km, produces a variable PmP reflection, which may indicate lateral heterogeneity of this boundary, and a weak and emergent Pn refraction with a velocity of 8.2 km/s. We interpret the crustal section as follows: the low‐velocity rocks of the southern YTT extend from the surface to depths of approximately 10 km; underthrust Mesozoic flysch of the Kahiltna terrane, rocks of the Gravina arc, and basement of the Wrangellia(?) terrane extend from 10 to 27 km depth; a 3‐ to 5‐km‐thick layer of mantle‐derived mafic rocks, relic oceanic crust, or Wrangellia(?) terrane lower crust extends from 27 to approximately 30 km depth; a tectonically young Moho beneath the southern YTT is found at an average depth of 30 km; and it is underlain by a mantle that may be relatively cool and/or olivine rich. In this interpretation, the Yukon‐Tanana terrane is a thin‐skinned terrane. Our results indicate that tectonic, and possibly magmatic, underplating has played a significant role in crustal growth for central Alaska.

Alaska↗

USGS1998

Effects of slip, slip rate, and shear heating on the friction of granite

The stability of fault slip is sensitive to the way in which frictional strength responds to changes in slip rate and in particular to the effective velocity dependence of steady state friction Δμ ss /Δ ln V . This quantity can vary substantially with displacement, temperature and slip rate. To investigate the physical basis for this behavior and the possible influence of shear heating, we slid initially bare granite surfaces in unconfined rotary shear to displacements of hundreds of millimeters at normal stresses, σ n of 10 and 25 MPa and at room temperature. We imposed step changes in slip rate within the range 10 −2 to 10 3.5 μm/s and also monitored frictional heating with thermistors embedded in the granite. The transient response of μ to slip rate steps was fit to a rate- and state-dependent friction law using two state variables to estimate the values of several parameters in the constitutive law. The first 20 mm of slip shows rising friction and falling Δμ ss /Δ ln V ; further slip shows roughly constant friction, Δμ ss /Δ ln V and parameter values, suggesting that a steady state condition is reached on the fault surface. At V ≤ 10 μm/s, Δμ ss /Δ ln V = −0.004 ± 0.001. At higher rates the response is sensitive to normal stress: At σ n = 25 MPa granite shows a transition to effective velocity strengthening (Δμ ss /Δ ln V = 0.008 ± 0.004) at the highest slip rates tested. At 10 MPa granite shows a less dramatic change to Δμ ss /Δ ln V ≈ 0 at the highest rates. The maximum temperature measured in the granite is ∼60°C at 25 MPa and 10 3.5 μm/s. Temperatures are in general agreement with a numerical model of heat conduction which assumes spatially homogeneous frictional heating over the sliding surface. The simplest interpretation of our measurements of Δμ ss /Δ ln V is that the granite is inherently velocity weakening (∂μ ss /∂ ln V < 0) and temperature strengthening (∂μ ss /∂ T −1 < 0) at all velocities. At high slip rates the response of μ to changes in temperature from shear heating may outweigh the response to changing velocity, such that the net effect Δμ ss /Δ ln V > 0 mimics velocity strengthening. These results have implications for the frictional behavior of faults during earthquakes. High slip rates may cause a switch to effective velocity strengthening which could limit peak coseismic slip rate and stress drop. For fluid-saturated faults, strengthening by this mechanism may be partly or fully offset by weakening due to thermal pressurization of a poorly drained pore fluid.

Journal of Geophysical Research B: Solid Earth↗

USGS2021

Temporal seismic velocity variations: Recovery following from the 2019 Mw 7.1 Ridgecrest, California earthquake

We investigated seismic velocity changes ( dv / v ) associated with the 2019 Ridgecrest earthquake sequence with high‐frequency autocorrelations of ambient seismic noise data. Daily autocorrelation functions were computed for the entirety of 2019 and the first quarter of 2020 for broadband stations within the region, including the temporary broadband stations installed during the aftershock deployment. Travel time shifts in the daily autocorrelation functions, relative to the mean autocorrelation waveform, were computed to produce dv / v time series, which are sensitive to the evolving material properties of the shallow crust surrounding the Ridgecrest fault zone (RFZ). A short‐term velocity drop follows the M w 7.1 earthquake at stations in the vicinity of the rupture surface, while those greater than 50 km away showed no such drop. The maximum, absolute changes in seismic velocity are proportional to the logarithm of distance from the fault rupture and to the peak dynamic strain experienced during the earthquake. Near the areas of the highest coseismic slip within the RFZ, seismic velocities recovered over 3 months. However, in the vicinity of the nearby Garlock fault, where triggered slip manifested, and north of the RFZ, seismic velocities recovered within a month. We interpret the seismic velocity changes and their recovery to be largely due to changes in the physical properties of the shallow crust, such as fault zone damage recovery caused by the earthquake rupture process and in response to the large dynamic stresses of passing seismic waves from the mainshock.

California↗

USGS2000

Gravitational stability of three-dimensional stratovolcano edifices

Catastrophic flank collapses have occurred at many stratovolcanoes worldwide. We present a three-dimensional (3-D) slope stability analysis for assessing and quantifying both the locations of minimum edifice stability and the expected volumes of potential failure. Our approach can search the materials underlying a topographic surface, represented as a digital elevation model (DEM), and determine the relative stability of all parts of the edifice. Our 3-D extension of Bishop's [1955] simplified limit-equilibrium analysis incorporates spherical failure surfaces, variable material properties, pore fluid pressures, and earthquake shaking. Although a variety of processes can trigger collapse, we focus here on gravitationally induced instability. Even homogeneous rock properties strongly influence the depth and volume of the least stable potential failure. For large failures in complex topography, patterns of potential instability do not mimic local ground surface slope alone. The May 18, 1980, catastrophic failure of the north flank of Mount St. Helens provides the best documented case history to test our method. Using the undeformed edifice topography of Mount St. Helens in an analysis of dry, static slope stability with homogeneous materials, as might be conducted in a precollapse hazard analysis, our method identified the northwest flank as the least stable region, although the north flank stability was within 5% of the minimum. Using estimates of the conditions that existed 2 days prior to collapse, including deformed topography with a north flank bulge and combined pore pressure and earthquake shaking effects, we obtained good estimates of the actual failure location and volume. Our method can provide estimates of initial failure volume and location to aid in assessing downslope or downstream hazards.

Washington↗

USGS2023

Accuracy of finite fault slip estimates in subduction zone regions with topographic Green's functions and seafloor geodesy

Until recently, the lack of seafloor geodetic instrumentation and the use of unrealistically simple, half-space based forward models have resulted in poor resolution of near-trench slip in subduction zone settings. Here, we use a synthetic framework to investigate the impact of topography and geodetic data distribution on coseismic slip estimates in various subduction zone settings. We calculate surface displacements in two synthetic topographic domains that have topography similar to that of Chile and Japan, respectively. We then attempt to image target slip distributions by using a Bayesian approach to solve for slip with two sets of Green's functions—one that accounts for topography and one that does not—and five sets of 50 or more observation points selected from the synthetic surface displacements. Three of these sets of observation points are entirely onland, and two include 5–10 seafloor geodetic sites. We find that the use of topographic Green's functions always improves inferred slip models, and with seafloor geodetic data, it enables an almost perfect recovery of a target slip model, even in the near-trench region. Critically, our results demonstrate that it would be impossible for non-topographic Green's functions to properly recover the true slip distribution, particularly in the near-trench region. We also perform a parameter study with approximately 4,000 slip models estimated using a least-square approach, and find that topographic Green's functions yield significantly more accurate slip models in cases where good data (well distributed and reasonably dense) are available, even in the absence of seafloor geodetic sites.

Journal of Geophysical Research: Solid Earth↗

USGS2012

Tectonics and conductivity structures in the Southern Washington Cascades

The tectonic setting of the southern Washington Cascades has been studied with the aid of magnetotelluric (MT) and other geophysical data. The main feature of interest in the geophysical data is a broad high-conductivity anomaly mapped with MT and geomagnetic variation (GMV) data. This anomaly is located roughly within the triangle formed by the volcanoes Mount Rainier, Mount St. Helens, and Mount Adams but exceeds beyond Mount Rainier to the northwest. We interpret the cause of the anomaly to be conductive rocks with resistivities of 1–4 ohm m and thicknesses possibly greater than 15 km. These conductive rocks are found 2–8 km beneath the overlying less conductive volcanic and sedimentary rocks at the surface. Two aeromagnetic lows follow the trend of the conductivity anomaly, and linear belts of strike-slip seismicity are coincident with both these magnetic lows. One of the aeromagnetic lows is coincident with the western margin of the conductivity anomaly. The geophysical data appear to outline a suture zone of probable Eocene age caused by accretion of a large seamount complex (Siletzia) and that may contain large thicknesses of compressed forearc basin and accretionary prism sedimentary rocks of Cretaceous to Eocene age. Part of the shallower conductive rocks may be associated with carbonaceous continental and transitional marine sedimentary rocks of the Puget Group. The contact between the hypothesized compressed basin and the accreted terranes to the west may localize the release of shear stresses in this region of oblique subduction. Several possible explanations for the conductivity anomaly are considered in addition to the compressed basin hypothesis.

Washington↗

USGS2012

A dislocation model of strain accumulation and release at a subduction zone

Strain accumulation and release at a subduction zone are attributed to stick slip on the main thrust zone and steady aseismic slip on the remainder of the plate interface. This process can be described as a superposition of steady state subduction and a repetitive cycle of slip on the main thrust zone, consisting of steady normal slip at the plate convergence rate plus occasional thrust events that recover the accumulated normal slip. Because steady state subduction does not contribute to the deformation at the free surface, deformation observed there is completely equivalent to that produced by the slip cycle alone. The response to that slip is simply the response of a particular earth model to embedded dislocations. For a purely elastic earth model, the deformation cycle consists of a coseismic offset followed by a linear‐in‐time recovery to the initial value during the interval between earthquakes. For an elastic‐viscoelastic earth model (elastic lithosphere over a viscoelastic asthenosphere), the postearthquake recovery is not linear in time. Records of local uplift as a function of time indicate that the long‐term postseismic recovery is approximately linear, suggesting that elastic earth models are adequate to describe the deformation cycle. However, the deformation predicted for a simple elastic half‐space earth model does not reproduce the deformation observed along the subduction zones in Japan at all well if stick slip is restricted to the main thrust zone. As recognized earlier by Shimazaki, Seno, and Kato, the uplift profiles could be explained if stick slip were postulated to extend along the plate interface beyond the main thrust zone to a depth of perhaps 100 km, but independent evidence suggests that stick slip at such depths is unlikely.

Journal of Geophysical Research B: Solid Earth↗

USGS2014

Spatial variability and landscape controls of near-surface permafrost within the Alaskan Yukon River Basin

The distribution of permafrost is important to understand because of permafrost's influence on high-latitude ecosystem structure and functions. Moreover, near-surface (defined here as within 1 m of the Earth's surface) permafrost is particularly susceptible to a warming climate and is generally poorly mapped at regional scales. Subsequently, our objectives were to (1) develop the first-known binary and probabilistic maps of near-surface permafrost distributions at a 30 m resolution in the Alaskan Yukon River Basin by employing decision tree models, field measurements, and remotely sensed and mapped biophysical data; (2) evaluate the relative contribution of 39 biophysical variables used in the models; and (3) assess the landscape-scale factors controlling spatial variations in permafrost extent. Areas estimated to be present and absent of near-surface permafrost occupy approximately 46% and 45% of the Alaskan Yukon River Basin, respectively; masked areas (e.g., water and developed) account for the remaining 9% of the landscape. Strong predictors of near-surface permafrost include climatic indices, land cover, topography, and Landsat 7 Enhanced Thematic Mapper Plus spectral information. Our quantitative modeling approach enabled us to generate regional near-surface permafrost maps and provide essential information for resource managers and modelers to better understand near-surface permafrost distribution and how it relates to environmental factors and conditions.

Alaska↗

USGS2013

Aftershocks of the 2010 M w 7.2 El Mayor-Cucapah earthquake revealcomplex faulting in the Yuha Desert, California

We detect and precisely locate over 9500 aftershocks that occurred in the Yuha Desert region during a 2 month period following the 4 April 2010 M w 7.2 El Mayor-Cucapah (EMC) earthquake. Events are relocated using a series of absolute and relative relocation procedures that include Hypoinverse, Velest, and hypoDD. Location errors are reduced to ~40 m horizontally and ~120 m vertically.Aftershock locations reveal a complex pattern of faulting with en echelon fault segments trending toward the northwest, approximately parallel to the North American-Pacific plate boundary and en echelon, conjugate features trending to the northeast. The relocated seismicity is highly correlated with published surface mapping of faults that experienced triggered surface slip in response to the EMC main shock. Aftershocks occurred between 2 km and 11 km depths, consistent with previous studies of seismogenic thickness in the region. Three-dimensional analysis reveals individual and intersecting fault planes that are limited in their along-strike length. These fault planes remain distinct structures at depth, indicative of conjugate faulting, and do not appear to coalesce onto a throughgoing fault segment. We observe a complex spatiotemporal migration of aftershocks, with seismicity that jumps between individual fault segments that are active for only a few days to weeks. Aftershock rates are roughly consistent with the expected earthquake production rates of Dieterich (1994). The conjugate pattern of faulting and nonuniform aftershock migration patterns suggest that strain in the Yuha Desert is being accommodated in a complex manner.

California↗

USGS2006

Seismic characteristics of central Brazil crust and upper mantle: A deep seismic refraction study

[1] A two‐dimensional model of the Brazilian central crust and upper mantle was obtained from the traveltime interpretation of deep seismic refraction data from the Porangatu and Cavalcante lines, each approximately 300 km long. When the lines were deployed, they overlapped by 50 km, forming an E‐W transect approximately 530 km long across the Tocantins Province and western São Francisco Craton. The Tocantins Province formed during the Neoproterozoic when the São Francisco, the Paranapanema, and the Amazon cratons collided, following the subduction of the former Goiás ocean basin. Average crustal V P and V P /V S ratios, Moho topography, and lateral discontinuities within crustal layers suggest that the crust beneath central Brazil can be associated with major geological domains recognized at the surface. The Moho is an irregular interface, between 36 and 44 km deep, that shows evidences of first‐order tectonic structures. The 8.05 and 8.23 km s −1 P wave velocities identify the upper mantle beneath the Porangatu and Cavalcante lines, respectively. The observed seismic features allow for the identification of (1) the crust has largely felsic composition in the studied region, (2) the absence of the mafic‐ultramafic root beneath the Goiás magmatic arc, and (3) block tectonics in the foreland fold‐and‐thrust belt of the northern Brasília Belt during the Neoproterozoic. Seismic data also suggested that the Bouguer gravimetric discontinuities are mainly compensated by differences in mass distribution within the lithospheric mantle. Finally, the Goiás‐Tocantins seismic belt can be interpreted as a natural seismic alignment related to the Neoproterozoic mantle domain.

Journal of Geophysical Research B: Solid Earth↗

USGS1996

Shear wave velocity structure in North America from large-scale waveform inversions of surface waves

A two-step nonlinear and linear inversion is carried out to map the lateral heterogeneity beneath North America using surface wave data. The lateral resolution for most areas of the model is of the order of several hundred kilometers. The most obvious feature in the tomographic images is the rapid transition between low velocities in the tectonically active region west of the Rocky Mountains and high velocities in the stable central and eastern shield of North America. The model also reveals smaller-scale heterogeneous velocity structures. A high-velocity anomaly is imaged beneath the state of Washington that could be explained as the subducting Juan de Fuca plate beneath the Cascades. A large low-velocity structure extends along the coast from the Mendocino to the Rivera triple junction and to the continental interior across the southwestern United States and northwestern Mexico. Its shape changes notably with depth. This anomaly largely coincides with the part of the margin where no lithosphere is consumed since the subduction has been replaced by a transform fault. Evidence for a discontinuous subduction of the Cocos plate along the Middle American Trench is found. In central Mexico a transition is visible from low velocities across the Trans-Mexican Volcanic Belt (TMVB) to high velocities beneath the Yucatan Peninsula. Two elongated low-velocity anomalies beneath the Yellowstone Plateau and the eastern Snake River Plain volcanic system and beneath central Mexico and the TMVB seem to be associated with magmatism and partial melting. Another low-velocity feature is seen at depths of approximately 200 km beneath Florida and the Atlantic Coastal Plain. The inversion technique used is based on a linear surface wave scattering theory, which gives tomographic images of the relative phase velocity perturbations in four period bands ranging from 40 to 150 s. In order to find a smooth reference model a nonlinear inversion based on ray theory is first performed. After correcting for the crustal thickness the phase velocity perturbations obtained from the subsequent linear waveform inversion for the different period bands are converted to a three-layer model of S velocity perturbations (layer 1, 25–100 km; layer 2, 100–200 km; layer 3, 200–300 km). We have applied this method on 275 high-quality Rayleigh waves recorded by a variety of instruments in North America (IRIS/USGS, IRIS/IDA, TERRAscope, RSTN). Sensitivity tests indicate that the lateral resolution is especially good in the densely sampled western continental United States, Mexico, and the Gulf of Mexico.

Journal of Geophysical Research B: Solid Earth↗

USGS2013

Bayesian inversion of data from effusive volcanic eruptions using physics-based models: Application to Mount St. Helens 2004--2008

Physics-based models of volcanic eruptions can directly link magmatic processes with diverse, time-varying geophysical observations, and when used in an inverse procedure make it possible to bring all available information to bear on estimating properties of the volcanic system. We develop a technique for inverting geodetic, extrusive flux, and other types of data using a physics-based model of an effusive silicic volcanic eruption to estimate the geometry, pressure, depth, and volatile content of a magma chamber, and properties of the conduit linking the chamber to the surface. A Bayesian inverse formulation makes it possible to easily incorporate independent information into the inversion, such as petrologic estimates of melt water content, and yields probabilistic estimates for model parameters and other properties of the volcano. Probability distributions are sampled using a Markov-Chain Monte Carlo algorithm. We apply the technique using GPS and extrusion data from the 2004–2008 eruption of Mount St. Helens. In contrast to more traditional inversions such as those involving geodetic data alone in combination with kinematic forward models, this technique is able to provide constraint on properties of the magma, including its volatile content, and on the absolute volume and pressure of the magma chamber. Results suggest a large chamber of >40 km 3 with a centroid depth of 11–18 km and a dissolved water content at the top of the chamber of 2.6–4.9 wt%.

Washington↗

USGS2009

Moderate rates of late Quaternary slip along the northwestern margin of the Basin and Range Province, Surprise Valley fault, northeastern California

The 86-km-long Surprise Valley normal fault forms part of the active northwestern margin of the Basin and Range province in northeastern California. We use trench mapping and radiocarbon, luminescence, and tephra dating to estimate displacements and timing of the past five surface-rupturing earthquakes on the central part of the fault near Cedarville. A Bayesian OxCal analysis of timing constraints indicates earthquake times of 18.2 ± 2.6, 10.9 ± 3.2, 8.5 ± 0.5, 5.8 ± 1.5, and 1.2 ± 0.1 ka. These data yield recurrence intervals of 7.3 ± 4.1, 2.5 ± 3.2, 2.7 ± 1.6, and 4.5 ± 1.5 ka and an elapsed time of 1.2 ± 0.1 ka since the latest surface-rupturing earthquake. Our best estimate of latest Quaternary vertical slip rate is 0.6 ?? 0.1 mm/a. This late Quaternary rate is remarkably similar to long-term (8-14 Ma) minimum vertical slip rates (>0.4-0.5 ± 0.3 mm/a) calculated from recently acquired seismic reflection and chronologic and structural data in Surprise Valley and the adjacent Warner Mountains. However, our slip rate yields estimates of extension that are lower than recent campaign GPS determinations by factors of 1.5-4 unless the fault has an unusually shallow (30°-35°) dip as suggested by recently acquired seismic reflection data. Coseismic displacements of 2-4.5 ± 1 m documented in the trench and probable rupture lengths of 53-65 km indicate a history of latest Quaternary earthquakes of M 6.8-7.3 on the central part of the. Surprise Valley fault.

California↗

USGS2012

Investigation of internal friction in fused quartz, steel, Plexiglass, and Westerly granite from 0.01 to 1.00 Hertz at 10-8 to 10-7 strain amplitude

A detailed evaluation on the method of internal friction measurement by the stress-strain hysteresis loop method from 0.01 to 1 Hz at 10 −8 to 10 −7 strain amplitude and 23.9°C is presented. Significant systematic errors in relative phase measurement can result from convex end surfaces of the sample and stress sensor and from end surface irregularities such as nicks and asperities. Preparation of concave end surfaces polished to optical smoothness having a radius of curvature >3.6×10 4 cm reduces the systematic error in relative phase measurements to <(5.5±2.2)×10 −4 radians. The values of Q E −1 (internal friction under uniaxial compression) determined from the relative phase measurements are | Q E −1 – Q s −1 |< 2.8×10 −3 for the tool steel sample and | Q E −1 – Q s −1 |< 2.2×10 −3 for the Westerly granite sample, where Q s −1 is the internal friction of the fused quartz stress sensor under uniaxial compression. These values are consistent with those inferred from the relative modulus dispersion data also presented in this paper. The polymethyl methacrylate (PMM, trade name Plexiglass) sample shows high values of internal friction ( Q E −1 ≅5×10 −2 ) with strong frequency dependence and with a maximum in Q E −1 at ≅0.4 Hz.

Journal of Geophysical Research Solid Earth↗

USGS2012

Interpretation of gravity data in a complex volcano-tectonic setting, southwestern Nevada

This regional gravity study, based on an irregular 2-km data grid, was conducted during the past few years at Yucca Mountain, southern Nye County, Nevada, as part of a program to locate a suitable repository for high-level nuclear waste. About 100 surface rock samples, three borehole gamma-gamma logs, and one borehole gravity study provide excellent density control. A nearly linear increase in density of 0.26 g/cm 3 per kilometer of depth is indicated in the thick tuff sequences that underlie the mountain. Isostatic and 2.0-g/cm 3 Bouguer corrections were applied to the observed gravity values to remove regional gradients and topographic effects, respectively. The Bare Mountain gravity high, with an isostatic anomaly maximum of 48 mGal, is connected with a greater gravity high over the Funeral Mountains, to the southwest; together, these highs result from a continuous block of dense, metamorphosed Precambrian and Paleozoic rocks that stretches across much of the Walker Lane from the east edge of Death Valley to Bare Mountain. The Calico Hills gravity high appears more likely to originate from a northeast trending buried ridge of Paleozoic rocks that extends southwestward beneath Busted Butte, 5 km southeast of the proposed repository, where two- and three-dimensional modeling indicates that the pre-Cenozoic rocks lie less than 1000 m beneath the surface. Tuff, at least 4000 m thick, fills a large steep-sided depression in the pretuff rocks beneath Yucca Mountain and Crater Flat. The gravity low and the thick tuff section lie within a large collapse area that includes the Crater Flat-Timber Mountain-Silent Canyon caldera complexes. Gravity lows in Crater Flat itself are interpreted to coincide with the source areas of the Prow Pass Member, the Bullfrog Member, and the Tram Member of the Crater Flat Tuff; these source areas add nearly 350 km 2 to the previously recognized extent of the local caldera complexes. Southward extension of the broad gravity low associated with Crater Flat into the Amargosa Desert is evidence for sector graben-type collapse segments related to the formation of the Timber Mountain caldera and superimposed on the other volcanic and extensional structures within Crater Flat.

Journal of Geophysical Research Solid Earth↗

USGS2011

A model for seasonal changes in GPS positions and seismic wave speeds due to thermoelastic and hydrologic variations

It is known that GPS time series contain a seasonal variation that is not due to tectonic motions, and it has recently been shown that crustal seismic velocities may also vary seasonally. In order to explain these changes, a number of hypotheses have been given, among which thermoelastic and hydrology-induced stresses and strains are leading candidates. Unfortunately, though, since a general framework does not exist for understanding such seasonal variations, it is currently not possible to quickly evaluate the plausibility of these hypotheses. To fill this gap in the literature, I generalize a two-dimensional thermoelastic strain model to provide an analytic solution for the displacements and wave speed changes due to either thermoelastic stresses or hydrologic loading, which consists of poroelastic stresses and purely elastic stresses. The thermoelastic model assumes a periodic surface temperature, and the hydrologic models similarly assume a periodic near-surface water load. Since all three models are two-dimensional and periodic, they are expected to only approximate any realistic scenario; but the models nonetheless provide a quantitative framework for estimating the effects of thermoelastic and hydrologic variations. Quantitative comparison between the models and observations is further complicated by the large uncertainty in some of the relevant parameters. Despite this uncertainty, though, I find that maximum realistic thermoelastic effects are unlikely to explain a large fraction of the observed annual variation in a typical GPS displacement time series or of the observed annual variations in seismic wave speeds in southern California. Hydrologic loading, on the other hand, may be able to explain a larger fraction of both the annual variations in displacements and seismic wave speeds. Neither model is likely to explain all of the seismic wave speed variations inferred from observations. However, more definitive conclusions cannot be made until the model parameters are better constrained. Copyright ?? 2011 by the American Geophysical Union.

Journal of Geophysical Research B: Solid Earth↗

USGS2019

Lithospheric signature of late Cenozoic extension in electrical resistivity structure of the Rio Grande rift, New Mexico, USA

We present electrical resistivity models of the crust and upper mantle from two‐dimensional (2‐D) inversion of magnetotelluric (MT) data collected in the Rio Grande rift, New Mexico, USA. Previous geophysical studies of the lithosphere beneath the rift identified a low‐velocity zone several hundred kilometers wide, suggesting that the upper mantle is characterized by a very broad zone of modified lithosphere. In contrast, the surface expression of the rift (e.g., high‐angle normal faults and synrift sedimentary units) is confined to a narrow region a few tens of kilometers wide about the rift axis. MT data are uniquely suited to probing the depths of the lithosphere that fill the gap between surface geology and body wave seismic tomography, namely the middle to lower crust and uppermost mantle. We model the electrical resistivity structure of the lithosphere along two east‐west trending profiles straddling the rift axis at the latitudes of 36.2 and 32.0°N. We present results from both isotropic and anisotropic 2‐D inversions of MT data along these profiles, with a strong preference for the latter in our interpretation. A key feature of the anisotropic resistivity modeling is a broad (~200‐km wide) zone of enhanced conductivity (<20 Ωm) in the middle to lower crust imaged beneath both profiles. We attribute this lower crustal conductor to the accumulation of free saline fluids and partial melt, a direct result of magmatic activity along the rift. High‐conductivity anomalies in the midcrust and upper mantle are interpreted as fault zone alteration and partial melt, respectively.

New Mexico↗