USGS Science⌕ Search

SEARCH · USGS Science

Results for “Environmental Science & Technology - Water”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 343 records · Page 19Linked to original sources
USGS2010

Carbon dioxide emission factors for U.S. coal by origin and destination

This paper describes a method that uses published data to calculate locally robust CO 2 emission factors for U.S. coal. The method is demonstrated by calculating CO 2 emission factors by coal origin (223 counties, in 1999) and destination (479 power plants, in 2005). Locally robust CO 2 emission factors should improve the accuracy and verification of greenhouse gas emission measurements from individual coal-fired power plants. Based largely on the county origin, average emission factors for U.S. lignite, subbituminous, bituminous, and anthracite coal produced during 1999 were 92.97,91.97,88.20, and 98.91 kg CO 2 /GJ gross , respectively. However, greater variation is observed within these rank classes than between them, which limits the reliability of CO 2 emission factors specified by coal rank. Emission factors calculated by destination (power plant) showed greater variation than those listed in the Emissions & Generation Resource Integrated Database (eGRID), which exhibit an unlikely uniformity that is inconsistent with the natural variation of CO 2 emission factors for U.S. coal. ?? 2010 American Chemical Society.

Environmental Science & Technology↗
USGS2010

Redox transformations and transport of cesium and iodine (-1, 0, +5) in oxidizing and reducing zones of a sand and gravel aquifer

Tracer tests were performed in distinct biogeochemical zones of a sand and gravel aquifer in Cape Cod, MA, to study the redox chemistry (I) and transport (Cs, I) of cesium and iodine in a field setting. Injection of iodide (I - ) into an oxic zone of the aquifer resulted in oxidation of I - to molecular iodine (I 2 ) and iodate (IO 3 - ) over transport distances of several meters. Oxidation is attributed to Mn-oxides present in the sediment. Transport of injected IO 3 - and Cs + was retarded in the mildly acidic oxic zone, with retardation factors of 1.6-1.8 for IO 3 - and 2.3-4.4for Cs. Cs retardation was likely due to cation exchange reactions. Injection of IO 3 - into a Fe-reducing zone of the aquifer resulted in rapid and complete reduction to I - within 3 m of transport. The nonconservative behavior of Cs and I observed during the tracer tests underscores the necessity of taking the redox chemistry of I as well as sorption properties of I species and Cs into account when predicting transport of radionuclides (e.g., 129 I and 137 Cs) in the environment.

Massachusetts↗
USGS2010

Zn and Cu isotopes as tracers of anthropogenic contamination in a sediment core from an urban lake

In this work, we use stable Zn and Cu isotopes to identify the sources and timing of the deposition of these metals in a sediment core from Lake Ballinger near Seattle, Washington, USA. The base of the Lake Ballinger core predates settlement in the region, while the upper sections record the effects of atmospheric emissions from a nearby smelter and rapid urbanization of the watershed. δ 66 Zn and δ 65 Cu varied by 0.50‰ and 0.29‰, respectively, over the 500 year core record. Isotopic changes were correlated with the presmelter period (∼1450 to 1900 with δ 66 Zn = +0.39‰ ± 0.09‰ and δ 65 Cu = +0.77‰ ± 0.06‰), period of smelter operation (1900 to 1985 with δ 66 Zn = +0.14 ± 0.06‰ and δ 65 Cu = +0.94 ± 0.10‰), and postsmelting/stable urban land use period (post 1985 with δ 66 Zn = 0.00 ± 0.10‰ and δ 65 Cu = +0.82‰ ± 0.12‰). Rapid early urbanization during the post World War II era increased metal loading to the lake but did not significantly alter the δ 66 Zn and δ 65 Cu, suggesting that increased metal loads during this time were derived mainly from mobilization of historically contaminated soils. Urban sources of Cu and Zn were dominant since the smelter closed in the 1980s, and the δ 66 Zn measured in tire samples suggests tire wear is a likely source of Zn.

Washington↗
USGS2010

Isotopic composition and origin of indigenous natural perchlorate and co-occurring nitrate in the southwestern United States

Perchlorate (ClO 4 − ) has been detected widely in groundwater and soils of the southwestern United States. Much of this ClO 4 − appears to be natural, and it may have accumulated largely through wet and dry atmospheric deposition. This study evaluates the isotopic composition of natural ClO 4 − indigenous to the southwestern U.S. Stable isotope ratios were measured in ClO 4 − (δ 18 O, Δ 17 O, δ 37 Cl) and associated NO 3 − (δ 18 O, Δ 17 O, δ 15 N) in groundwater from the southern High Plains (SHP) of Texas and New Mexico and the Middle Rio Grande Basin (MRGB) in New Mexico, from unsaturated subsoil in the SHP, and from NO 3 − -rich surface caliche deposits near Death Valley, California. The data indicate natural ClO 4 − in the southwestern U.S. has a wide range of isotopic compositions that are distinct from those reported previously for natural ClO 4 − from the Atacama Desert of Chile as well as all known synthetic ClO 4 − . ClO 4 − in Death Valley caliche has a range of high Δ 17 O values (+8.6 to +18.4 ‰), overlapping and extending the Atacama range, indicating at least partial atmospheric formation via reaction with ozone (O 3 ). However, the Death Valley δ 37 Cl values (−3.1 to −0.8 ‰) and δ 18 O values (+2.9 to +26.1‰) are higher than those of Atacama ClO 4 − . In contrast, ClO 4 − from western Texas and New Mexico has much lower Δ 17 O (+0.3 to +1.3‰), with relatively high δ 37 Cl (+3.4 to +5.1 ‰) and δ 18 O (+0.5 to +4.8 ‰), indicating either that this material was not primarily generated with O 3 as a reactant or that the ClO 4 − was affected by postdepositional O isotope exchange. High Δ 17 O values in ClO 4 − (Atacama and Death Valley) are associated with high Δ 17 O values in NO 3 − , indicating that both compounds preserve characteristics of O 3 -related atmospheric production in hyper-arid settings, whereas both compounds have low Δ 17 O values in less arid settings. Although Δ 17 O variations in terrestrial NO 3 − can be attributed to mixing of atmospheric (high Δ 17 O) and biogenic (low Δ 17 O) NO 3 − , variations in Δ 17 O of terrestrial ClO 4 − are not readily explained in the same way. This study provides important new constraints for identifying natural sources of ClO 4 − in different environments by multicomponent isotopic characteristics, while presenting the possibilities of divergent ClO 4 − formation mechanisms and(or) ClO 4 − isotopic exchange in biologically active environments.

Environmental Science & Technology↗
USGS1995

Dietary exposure of mink to carp from Saginaw Bay. 3. Characterization of dietary exposure to planar halogenated hydrocarbons, dioxin equivalents, and biomagnification

Mink are known to be very sensitive to the toxic effects of planar polychlorinated biphenyls (pPCBs), polychlorinated dibenzo- p -dioxins (PCDDs), and polychlorinated dibenzofurans (PCDFs), collectively known as planar halogenated hydrocarbons (PHHs). Previously, we reported the reproductive effects in mink fed a diet containing 10, 20, or 40% fish taken from Saginaw Bay, Lake Huron. The present study reports the chemical characterization of the diets and the adult mink livers, along with a comparison of an additive model of toxicity with the results of the H4IIE bioassay on these samples. The assessment of dietary or tissue-based exposure of the mink to 2,3,7,8-tetrachlorodibenzo- p -dioxin (TCDD) and related compounds revealed that TCDD equivalents of the PHH mixtures largely followed an additive model of toxicity as compared with the H4IIE bioassay. Consistent dietary and liver tissue-based threshold concentrations for reproductive toxicity in mink were determined regardless of whether PHHs were quantified as TEQs (additive toxicity) or TCDD-EQs (H4IIE bioassay). Significant reproductive effects were observed in the lowest treatment group (10% fish or 19.4 pg of H4IIE bioassay-derived TCDD-EQs/g). Consumption-normalized mink liver biomagnification factors (BMFs) were 6.4−74.2 for PCDDs, <1−75.8 for PCDFs, <1−15.9 for PCBs, and in general, increased with degree of chlorination within each class. Based on TEQs or TCDD-EQ, this study confirms that mink are among the most, if not the most, sensitive mammalian species to the reproductive toxicity of TCDD and related compounds.

Environmental Science & Technology↗
USGS1996

Identification of a new sulfonic acid metabolite of metolachlor in soil

An ethanesulfonic acid metabolite of metolachlor (metolachlor ESA) was identified in soil-sample extracts by negative-ion, fast-atom bombardment mass spectrometry (FAB-MS) and FAB tandem mass spectrometry (FAB-MS/MS). Production fragments from MS/MS analysis of the deprotonated molecular ion of metolachlor ESA in the soil extract can be reconciled with the structure of the synthesized standard. The elemental compositions of the (M - H)- ions of the metolachlor ESA standard and the soil-sample extracts were confirmed by high-resolution mass spectrometry. A dissipation study revealed that metolachlor ESA is formed in soil under field conditions corresponding to a decrease in the concentration of the parent herbicide, metolachlor. The identification of the sulfonated metabolite of metolachlor suggests that the glutathione conjugation pathway is a common detoxification pathway shared by chloroacetanilide herbicides.

Environmental Science & Technology↗
USGS1996

Denitrification and nitrogen transport in a coastal aquifer receiving wastewater discharge

Denitrification and nitrogen transport were quantified in a sandy glacial aquifer receiving wastewater from a septage-treatment facility on Cape Cod, MA. The resulting groundwater plume contained high concentrations of NO3- (32 mg of NL-1), total dissolved nitrogen (40.5 mg of N L-1), and dissolved organic carbon (1.9 mg of C L-1) and developed a central anoxic zone after 17 months of effluent discharge. Denitrifying activity was measured using four approaches throughout the major biogeochemical zones of the plume. Three approaches that maintained the structure of aquifer materials yielded comparable rates: acetylene block in intact sediment cores, 9.6 ng of N cm-3 d-1 (n = 61); in situ N2 production, 3.0 ng of N cm-3 d-1 (n = 11); and in situ NO3- depletion, 7.1 ng of N cm-3 d-1 (n = 3). In contrast, the mixing of aquifer materials using a standard slurry method yielded rates that were more than 15-fold higher (150 ng of N cm-3 d-1, n = 16) than other methods. Concentrations and ??15N of groundwater and effluent N2, NO3-, and NH4+ were consistent with the lower rates of denitrification determined by the intact-core or in situ methods. These methods and a plumewide survey of excess N2 indicate that 2-9% of the total mass of fixed nitrogen recharged to the anoxic zone of the plume was denitrified during the 34-month study period. Denitrification was limited by organic carbon (not NO3-) concentrations, as evidenced by a nitrate and carbon addition experiment, the correlation of denitrifying activity with in situ concentrations of dissolved organic carbon, and the assessments of available organic carbon in plume sediments. Carbon limitation is consistent with the observed conservative transport of 85-96% of the nitrate in the anoxic zone. Although denitrifying activity removed a significant amount (46250 kg) of fixed nitrogen during transport, the effects of aquifer denitrification on the nitrogen load to receiving ecosystems are likely to be small (<10%).

Environmental Science & Technology↗
USGS1996

Influence of electron donor on the minimum sulfate concentration required for sulfate reduction in a petroleum hydrocarbon-contaminated aquifer

Fluctuations in the availability of electron donor (petroleum hydrocarbons) affected the competition between sulfate-reducing bacteria (SRB) and methanogenic bacteria (MB) for control of electron flow in a petroleum hydrocarbon-contaminated aquifer. The data suggest that abundant electron donor availability allowed MB to sequester a portion of the electron flow even when sulfate was present in sufficient concentrations to support sulfate reduction. For example, in an area of abundant electron-donor availability, SRB appeared to be unable to sequester the electron flow from MB in the presence of 1.4 mg/L sulfate. The data also suggest that when electron-donor availability was limited, SRB outcompeted MB for available substrate at a lower concentration of sulfate than when electron donor was plentiful. For example, in an area of limited electron-donor availability, SRB appeared to maintain dominance of electron flow at sulfate concentrations less than 1 mg/L. The presence of abundant electron donor and a limited amount of sulfate reduced competition for available substrate, allowing both SRB and MB to metabolize available substrates concurrently.

Environmental Science & Technology↗
USGS1996

Covalent binding of aniline to humic substances. 2. 15N NMR studies of nucleophilic addition reactions

Aromatic amines are known to undergo covalent binding with humic substances in the environment. Although previous studies have examined reaction conditions and proposed mechanisms, there has been no direct spectroscopic evidence for the covalent binding of the amines to the functional groups in humic substances. In order to further elucidate the reaction mechanisms, the Suwannee River and IHSS soil fulvic and humic acids were reacted with 15N-labeled aniline at pH 6 and analyzed using 15N NMR spectrometry. Aniline underwent nucleophilic addition reactions with the quinone and other carbonyl groups in the samples and became incorporated in the form of anilinohydroquinone, anilinoquinone, anilide, imine, and heterocyclic nitrogen, the latter comprising 50% or more of the bound amine. The anilide and anilinohydroquinone nitrogens were determined to be susceptible to chemical exchange by ammonia. In the case of Suwannee River fulvic acid, reaction under anoxic conditions and pretreatment with sodium borohydride or hydroxylamine prior to reaction under oxic conditions resulted in a decrease in the proportion of anilinohydroquinone nitrogen incorporated. The relative decrease in the incorporation of anilinohydroquinone nitrogen with respect to anilinoquinone nitrogen under anoxic conditions suggested that inter- or intramolecular redox reactions accompanied the nucleophilic addition reactions.

Environmental Science & Technology↗
USGS1996

Comparison of denitrification activity measurements in groundwater using cores and natural-gradient tracer tests

The transport of many solutes in groundwater is dependent upon the relative rates of physical flow and microbial metabolism. Quantifying rates of microbial processes under subsurface conditions is difficult and is most commonly approximated using laboratory studies with aquifer materials. In this study, we measured in situ rates of denitrification in a nitrate-contaminated aquifer using small-scale, natural-gradient tracer tests and compared the results with rates obtained from laboratory incubations with aquifer core material. Activity was measured using the acetylene block technique. For the tracer tests, co-injection of acetylene and bromide into the aquifer produced a 30 μM increase in nitrous oxide after 10 m of transport (23−30 days). An advection−dispersion transport model was modified to include an acetylene-dependent nitrous oxide production term and used to simulate the tracer breakthrough curves. The model required a 4-day lag period and a relatively low sensitivity to acetylene to match the narrow nitrous oxide breakthrough curves. Estimates of in situ denitrification rates were 0.60 and 1.51 nmol of N 2 O produced cm - 3 aquifer day - 1 for two successive tests. Aquifer core material collected from the tracer test site and incubated as mixed slurries in flasks and as intact cores yielded rates that were 1.2−26 times higher than the tracer test rate estimates. Results with the coring-dependent techniques were variable and subject to the small-scale heterogeneity within the aquifer, while the tracer tests integrated the heterogeneity along a flow path, giving a rate estimate that is more applicable to transport at the scale of the aquifer.

Environmental Science & Technology↗
USGS1996

Anaerobic hydrocarbon degradation in petroleum-contaminated harbor sediments under sulfate-reducing and artificially imposed iron-reducing conditions

The potential use of iron(III) oxide to stimulate in-situ hydrocarbon degradation in anaerobic petroleum-contaminated harbor sediments was investigated. Previous studies have indicated that Fe(III)-reducing bacteria (FeRB) can oxidize some electron donors more effectively than sulfate- reducing bacteria (SRB). In contrast to previous results in freshwater sediments, the addition of Fe(III) to marine sediments from San Diego Bay, CA did not switch the terminal electron-accepting process (TEAP) from sulfate reduction to Fe-(III) reduction. Addition of Fe(III) also did not stimulate anaerobic hydrocarbon oxidation. Exposure of the sediment to air [to reoxidize Fe(II) to Fe(III)] followed by anaerobic incubation of the sediments, resulted in Fe-(III) reduction as the TEAP, but contaminant degradation was not stimulated and in some instances was inhibited. The difference in the ability of FeRB to compete with the SRB in the different sediment treatments was related to relative population sizes. Although the addition of Fe(III) did not stimulate hydrocarbon degradation, the results presented here as well as other recent studies demonstrate that there may be significant anaerobic hydrocarbon degradation under sulfate-reducing conditions in harbor sediments.

Environmental Science & Technology↗
USGS1997

Chemical factors influencing colloid-facilitated transport of contaminants in porous media

The effects of colloids on the transport of two strongly sorbing solutes a hydrophobic organic compound, phenanthrene, and a metal ion, Ni 2+ were studied in sand-packed laboratory columns under different pH and ionic strength conditions. Two types of column experiments were performed as follows: (i) sorption/mobilization experiments where the contaminant was first sorbed in the column under conditions where no colloids were released and mobilized under conditions where colloids were released as a result of ionic strength reduction in the influent; and (ii) transport experiments where the contaminant, dissolved or sorbed on colloids, was injected into columns packed with a strongly sorbing porous medium. In the first type of experiment, contaminant mobilization was significant only when all releasable colloids were flushed from the column. In all other cases, although high colloid particle concentrations were encountered, there was no marked effect on total contaminant concentrations. In the second type of experiment, colloid deposition efficiencies were shown to control the enhancement of transport. The deposition efficiency was a function of the pH (for a high organic content sand) and of the contaminant concentration (for a charged species such as Ni 2+ ).

Environmental Science & Technology↗
USGS1997

Anaerobic degradation of benzene in diverse anoxic environments

Benzene has often been observed to be resistant to microbial degradation under anoxic conditions. A number of recent studies, however, have demonstrated that anaerobic benzene utilization can occur. This study extends the previous reports of anaerobic benzene degradation to sediments that varied with respect to contamination input, predominant redox condition, and salinity. In spite of differences in methodology, microbial degradation of benzene was noted in slurries constructed with sediments from various geographical locations and range from aquifer sands to fine-grained estuarine muds, under methanogenic, sulfate-reducing, and iron-reducing conditions. In aquifer sediments under methanogenic conditions, benzene loss was concomitant with methane production, and microbial utilization of [ 14 C]benzene yielded 14 CO 2 and 14 CH 4 . In slurries with estuarine and aquifer sediments under sulfate-reducing conditions, the loss of sulfate in amounts consistent with the stoichiometric degradation of benzene or the conversion of [ 14 C]benzene to 14 CO 2 indicates that benzene was mineralized. Benzene loss also occurred in the presence of Fe(III) in sediments from freshwater environments. Microbial benzene utilization, however, was not observed under denitrifying conditions. These results indicate that the potential for the anaerobic degradation of benzene, which was once thought to be resistant to non-oxygenase attack, exists in a variety of aquatic sediments from widely distributed locations.

Environmental Science & Technology↗
USGS1997

Lack of correlation between organic acid concentrations and predominant electron-accepting processes in a contaminated aquifer

Long-term (1992-1995) monitoring data from a petroleum hydrocarbon- contaminated aquifer were used to examine the hypothesis that concentrations of low molecular weight (LMW) aliphatic organic acids reflect terminal electron-accepting processes. During the period of study, concentrations of dissolved hydrogen (H2) indicated that methanogenic, sulfate-reducing, and iron(III)-reducing conditions predominated at the site. However, there was no correlation between LMW organic acid concentrations and concentrations of dissolved H2. These results indicate that organic acid concentrations are not a reliable indicator of local redox conditions at this site.

Environmental Science & Technology↗
USGS1997

Transport and recovery of bacteriophage PRD1 in a sand and gravel aquifer: Effect of sewage-derived organic matter

To test the effects of sewage-derived organic matter on virus attachment, 32P-labeled bacteriophage PRD1, linear alkylbenzene sulfonates (LAS), and tracers were injected into sewage-contaminated (suboxic, elevated organic matter) and uncontaminated (oxic, low organic matter) zones of an iron oxide-coated quartz sand and gravel aquifer on Cape Cod, MA. In the uncontaminated zone, 83% of the PRD1 were attenuated over the first meter of transport by attachment to aquifer grains. In the contaminated zone, 42% of the PRD1 were attenuated over the first meter of transport. Sewage-derived organic matter contributed to the difference in PRD1 attenuation by blocking attachment sites in the contaminated zone. At greater distances down gradient (to a total transport distance of 3.6 m), a near-constant amount of PRD1 continued to break through, suggesting that aquifer grain heterogeneities allowed a small amount of reversible attachment. Injection of an LAS mixture (25 mg L-1), a common sewage constituent, remobilized 87% of the attached PRD1 in the contaminated zone, but only 2.2% in the uncontaminated zone. LAS adsorption promoted virus recovery in the contaminated zone by altering the PRD1-surface interactions; however, the amount of LAS adsorbed was not sufficient to promote release of the attached PRD1 in the uncontaminated zone.

Environmental Science & Technology↗
USGS1997

Analysis of environmental data with censored observations

The potential threats to humans and to terrestrial and aquatic ecosystems from environmental contamination could depend on the sum of the concentrations of different chemicals. However, direct summation of environmental data is not generally feasible because it is common for some chemical concentrations to be recorded as being below the analytical reporting limit. This creates special problems in the analysis of the data. A new model selection procedure, named forward censored regression, is introduced for selecting an appropriate model for environmental data with censored observations. The procedure is demonstrated using concentrations of atrazine (2-chloro-4-ethylamino-6-isopropylamino- s -triazine), deethylatrazine (DEA, 2-amino-4-chloro-6-isopropylamino- s -triazine), and deisopropylatrazine (DIA, 2-amino-4-chloro-6-ethylamino- s -triazine) in groundwater in the midwestern United States by using the data derived from a previous study conducted by the U.S. Geological Survey. More than 80% of the observations for each compound for this study were left censored at 0.05 &mu;g/L. The values for censored observations of atrazine, DEA, and DIA are imputed with the selected models. The summation of atrazine residue (atrazine + DEA + DIA) can then be calculated using the combination of observed and imputed values to generate a pseudo-complete data set. The all-subsets regression procedure is applied to the pseudo-complete data to select the final model for atrazine residue. The methodology presented can be used to analyze similar cases of environmental contamination involving censored data.

Environmental Science & Technology↗