SEARCH · USGS Science

Results for “Electronics”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 343 records · Page 19Linked to original sources

USGS2011

Calibration of Nu-Instruments Noblesse multicollector mass spectrometers for argon isotopic measurements using a newly developed reference gas

The greatest challenge limiting 40 Ar/ 39 Ar multicollection measurements is the availability of appropriate standard gasses to intercalibrate detectors. In particular, use of zoom lens ion-optics to steer and focus ion beams into a fixed detector array (i.e., Nu Instruments Noblesse) makes intercalibration of multiple detectors challenging because different ion-optic tuning conditions are required for optimal peak shape and sensitivity at different mass stations. We have found that detector efficiency and mass discrimination are affected by changes in ion-optic tuning parameters. Reliance upon an atmospheric Ar standard to calibrate the Noblesse is problematic because there is no straightforward way to relate atmospheric 40 Ar and 36 Ar to measurements of 40 Ar and 39 Ar if they are measured on separate detectors. After exploring alternative calibration approaches, we have concluded that calibration of the Noblesse is best performed using exactly the same source, detector, and ion-optic tuning settings as those used in routine 40 Ar/ 39 Ar analysis. To accomplish this, we have developed synthetic reference gasses containing 40 Ar, 39 Ar and 38 Ar produced by mixing gasses derived from neutron-irradiated sanidine with an enriched 38 Ar spike. We present a new method for calibrating the Noblesse based on use of both atmospheric Ar and the synthetic reference gasses. By combining atmospheric Ar and synthetic reference gas in different ways, we can directly measure 40 Ar/ 39 Ar, 38 Ar/ 39 Ar, and 36 Ar/ 39 Ar correction factors over ratios that vary from 0.5 to 460. These correction factors are reproducible to better than ± 0.5‰ (2σ standard error) over intervals spanning ~ 24 h but can vary systematically by ~ 4% over 2 weeks of continuous use when electron multiplier settings are held constant. Monitoring this variation requires daily calibration of the instrument. Application of the calibration method to 40 Ar/ 39 Ar multicollection measurements of widely used sanidine reference materials ACs-2, FCs-2, and TCs-2 demonstrate that calculated 40 Ar*/ 39 Ar K can be accurately corrected to yield model 40 Ar/ 39 Ar ages consistent with those reported by Earthtime 40 Ar/ 39 Ar laboratories. Replicate analyses of 8–12 single-crystal sanidine ages are reproduced to within 1–2‰ (2σ standard error) under optimal analytical conditions. This calibration technique is applicable over a wide range of isotopic ratios and signal sizes. Finally, the reference gas has the added advantage of facilitating straightforward characterization of electron multiplier dead time over a wide dynamic range.

Chemical Geology↗

USGS2004

Functional group and individual maceral chemistry of high volatile bituminous coals from southern Indiana: Controls on coking

The individual maceral chemistries of two Pennsylvanian, high volatile bituminous coals, the Danville Coal Member (Dugger Formation, R o=0.55%) and the Lower Block Coal Member (Brazil Formation, R o=0.56%) of Indiana, were investigated using electron microprobe and Fourier Transform Infrared Spectrometry (FTIR) techniques, with the purpose of understanding differences in their coking behavior. Microprobe results reveal that carbon contents are highest in inertinite and sporinite, followed by desmocollinite and telocollinite. Oxygen and organic nitrogen are most abundant in telocollinite and desmocollinite; sporinite and inertinite contain lesser amounts of these two elements. Organic sulfur contents are highest in sporinite, lowest in inertinite, and intermediate in desmocollinite and telocollinite. Vitrinites within the Danville and Lower Block coals are very similar in elemental composition, while Lower Block inertinites and sporinites have higher carbon, lower oxygen, and sulfur contents which, when combined with the inertinite-and sporinite-rich composition of the Lower Block seam, strongly influences its whole coal chemistry. Fourier transform infrared spectrometry revealed greater aromatic hydrogen in the Lower Block coal, along with higher CH2/CH3 ratios, which suggest that liptinites contribute considerable amounts of long-chain, unbranched aliphatics to the overall kerogen composition of the Lower Block coal. Long-chain, unbranched aliphatics crack at higher temperatures, producing tar and oily byproducts during coking; these may help increase Lower Block plasticity. Electron microprobe and FTIR results indicate that individual maceral chemistries, combined with the maceral composition of the seam, are the primary control of better coking properties of the Lower Block coal. ?? 2003 Elsevier B.V. All rights reserved.

International Journal of Coal Geology↗

USGS2005

Arsenic-bearing pyrite and marcasite in the Fire Clay coal bed, Middle Pennsylvanian Breathitt Formation, eastern Kentucky

Arsenic concentrations determined on 11 lithotype samples from the Middle Pennsylvanian Breathitt Group Fire Clay coal bed, Leslie County, KY, range from 1 to 418 ppm (whole coal basis). The 11 lithotype samples, which vary in thickness from 4 to 18 cm, were sampled from a continuous 1.38 m channel sample, and were selected based on megascopic appearance (vitrain-rich versus attrital-rich). A lithotype that contains 418 ppm As is located near the top of the coal bed and is composed of 10.5 cm of bright clarain bands containing fusain that, within short distances, grade laterally into Fe sulfide bands. To determine the mode of occurrence of As in this lithotype, the coal was examined with scanning electron microscopy and analyzed by energy dispersive X-ray fluorescence. Massive, framboidal, cell filling, cell-wall replacement, and radiating forms of Fe sulfide were observed in the high As lithotype; many of the radiating Fe sulfide forms, and one of the cell-wall replacements contained As. Examination of the grains with optical light microscopy shows that the majority of radiating morphologies are pyrite, the remainder are marcasite. Selected Fe sulfide grains were also analyzed by electron microprobe microscopy. Arsenic concentrations within individual grains range from 0.0 wt.% to approximately 3.5 wt.%. On the basis of morphology, these Fe sulfides are presumed to be of syngenetic origin and would probably be removed from the coal during physical coal cleaning, thus eliminating a potential source of As from the coal combustion process. However, because the grains are radiating and have high surface area, dissolution and release of As could occur if the pyrite is oxidized in refuse ponds.

International Journal of Coal Geology↗

USGS2012

Minor element distribution in iron disulfides in coal: a geochemical review

Electron beam microanalysis of coal samples in U.S. Geological Survey (USGS) labs confirms that As is the most abundant minor constituent in Fe disulfides in coal and that Se, Ni, and other minor constituents are present less commonly and at lower concentrations than those for As. In nearly all cases, Hg occurs in Fe disulfides in coal at concentrations below detection by electron beam instruments. Its presence is shown by laser ablation ICP-MS, by selective leaching studies of bulk coal, and by correlation with Fe disulfide proxies such as total Fe and pyritic sulfur. Multiple generations of Fe disulfides are present in coal. These commonly show grain-to-grain and within-grain minor- or trace element compositional variation that is a function of the early diagenetic, coalification, and post-coalification history of the coal. Framboidal pyrite is almost always the earliest Fe disulfide generation, as shown by overgrowths of later Fe disulfides which may include pyrite or marcasite. Cleat- (or vein) pyrite (or marcasite) is typically the latest Fe disulfide generation, as shown by cross-cutting relations. Cleat pyrite forms by fluid migration within a coal basin and consequently may be enriched in elements such as As by deposition from compaction-driven fluids, metal enriched basinal brines or hydrothermal fluids. In some cases, framboidal pyrite shows preferential Ni enrichment with respect to co-occurring pyrite forms. This is consistent with bacterial complexing of metals in anoxic sediments and derivation of framboidal pyrite from greigite (Fe 3 S 4 ), an Fe monosulfide precursor to framboidal pyrite having the thio-spinel structure which accommodates transition metals. Elements such as As, Se, and Sb substitute for S in the pyrite structure whereas metals, including transition metals, Hg and Pb, are thought to substitute for Fe. Understanding the distribution of minor and trace elements in Fe disulfides in coal has important implications for their availability to the environment through coal mining and use, as well as for potential reduction by coal preparation, and for delineating diagenetic compositional changes throughout and after coal formation.

International Journal of Coal Geology↗

USGS2022

Evaluating aromatization of solid bitumen generated in the presence and absence of water: Implications for solid bitumen reflectance as a thermal proxy

Geological models for petroleum generation suggest thermal conversion of oil-prone sedimentary organic matter in the presence of water promotes increased liquid saturate yield, whereas absence of water causes formation of an aromatic, cross-linked solid bitumen residue. To test the influence of hydrogen from water, organic-rich (22 wt% total organic carbon , TOC) mudrock samples from the Eocene lacustrine Green River Formation Mahogany zone oil shale were pyrolyzed under hydrous and anhydrous conditions in closed system batch reactors at temperatures between 300 and 370 °C for 72 h. Pre- and post-pyrolysis samples were characterized using petrographic approaches including optical microscopy , reflectance, Raman spectroscopy , and scanning electron and transmission electron microscopy to quantify differences in relative appearance, abundance, and composition of solid bitumen newly generated during the pyrolysis experiments. Petrographic analyses were supplemented by geochemical screening measurements (TOC content and programmed temperature pyrolysis). Results show post-hydrous pyrolysis residues contain lower TOC, are comprised of solid bitumen with greater aromaticity , and have textures indicative of lower viscosities, relative to anhydrous residues from the same temperature pyrolysis conditions. These observations suggest solid bitumen forming from thermal conversion of oil-prone sedimentary organic matter under anhydrous conditions may be less aromatic, although more cross-linked, than solid bitumen forming under hydrous conditions at the same time-temperature combination. To explain these results, we suggest that a radical disproportionation mechanism is favored in the presence of hydrogen donated from water, and that this disproportionation promotes aromatization in the solid residue with concomitant expulsion of saturated hydrocarbons.

International Journal of Coal Geology↗

USGS2022

Relating systematic compositional variability to the textural occurrence of solid bitumen in shales

This study presents Raman spectroscopic data paired with scanning electron microscopy (SEM) images to assess solid bitumen composition as a function of solid bitumen texture and association with minerals. A series of hydrous pyrolysis experiments (1–103 days, 300–370 °C) using a low maturity (0.25% solid bitumen reflectance, BR o ), high total organic carbon [(TOC), 14.0 wt%] New Albany Shale sample as the starting material yielded pyrolysis residues designed to evaluate the evolution of solid bitumen aromaticity with increasing temperature and heating duration. Solid bitumen was analyzed by Raman spectroscopy wherein point data were collected from accumulations that ranged in size and degree of association with the mineral matrix. Raman spectroscopy results show that with increasing temperature and experimental duration, solid bitumen aromaticity increases and compositional variability decreases. With regards to texture and composition, coarser-grained solid bitumen (>1.3 μm from nearest mineral grain) has consistently higher, but less variable aromaticity than thinner, wispy solid bitumen which is more intimately associated with the mineral matrix. Collocated scanning electron microscope images were used to provide qualitative assessments of porosity hosted by the organic matter. These paired data sets suggest that solid bitumen porosity development and molecular composition are linked, and these parameters are related to the textural relationships of the organic matter within the whole rock. These results are discussed with perspective towards understanding how rock fabric and texture can influence organic matter evolution during thermal maturation of organic-rich marine shales and inform our broader understanding of these important energy resources.

International Journal of Coal Geology↗

USGS2022

Pore systems and organic petrology of cretaceous Mowry and Niobrara source-rock reservoirs, Powder River Basin, Wyoming, USA

The Powder River Basin (PRB) is a world-class oil province, in large part thanks to contributions from premier source rocks, Cretaceous Mowry and Niobrara shales. Both formations are also unconventional reservoirs. A critical aspect of evaluating production potential and finding sweet spots is the nature of the pore systems in these fine-grained source-rock reservoirs. Variation by stratigraphic interval is important for selecting optimum target zones for horizontal wells. Understanding variation in pore type, size, and connectivity and relationships with mineralogy and fabric help in determining prospectivity in different parts of the basin. Deciphering controls on pore-system development helps predict intervals and locations of optimum reservoir quality. Imaging of Niobrara and Mowry samples from a range of thermal maturities provided observations and data on pore systems, organic matter (OM) types and associations with mineralogy and fabric, wettability, and microporosity associated with both diagenetic and detrital clays. Imaging techniques included scanning electron microscopy, organic petrography and correlative scanning electron microscopy, and mapping of mineralogy through energy dispersive spectroscopy. Mean solid bitumen (BR o ) and vitrinite reflectance (VR o ) values indicate all samples are in the oil window with values ranging from 0.52 to 1.15%. Organic fluorescence is prominent in amorphous OM, solid bitumen and some vitrinite in the early oil window. The fluorescence is extinguished at higher thermal maturity. Carbonate pellets (in Niobrara) mainly contain migrated solid bitumen and residual live oil and little or no terrigenous OM (vitrinite and inertinite). However, terrigenous OM is common in siliceous/argillaceous laminae in both formations, where it occurs with amorphous OM, some of which has converted in situ to a solid bitumen petroleum residue. One key finding is the widespread presence of migrated OM at very early oil window maturity. Distribution of such OM and associated wettability alteration is fabric-controlled, at all levels of thermal maturity studied. Clay morphology and abundance and supporting rigid mineral grain framework strongly influence pore development, preservation, and connectivity in both formations. Carbonate content is a good proxy for reservoir quality in Niobrara intervals due to association of porous solid bitumen with calcareous fecal pellets. High recrystallized microquartz content is associated with the best reservoir intervals in the Mowry.

Wyoming↗

USGS2026

Phase evolution and elemental partitioning in impact melts from Meteor Crater, Arizona

The impact of the Canyon Diablo iron meteorite in Arizona ∼61,000 years ago resulted in partial vaporization of the meteorite and target rocks, producing a vapor plume and melt particles with taenite, olivine and clinopyroxene in glassy matrix. The resulting Meteor Crater is ∼1.2 km in diameter and ∼200 m deep. Although the crater has been the natural laboratory for impact cratering, the microstructure and composition of its impact-melt particles remain poorly studied. Here microstructure and composition were investigated using optical and scanning electron microscopy, energy-dispersive X-ray spectroscopy, electron backscatter diffraction, and synchrotron microdiffraction on particles collected from the ejecta blanket to reconstruct their temporal and mineralogical evolution during ultrafast quenching and to explore how mafic minerals form from sedimentary-derived melts. Elemental mapping reveals complex chemical partitioning among glass and mafic phases. Formation of Fe-Ni globules with face-centered cubic (fcc) taenite indicates oxygen fugacity well below atmospheric in the vapor cloud. During rapid cooling, skeletal olivine crystallized, followed by nucleation of clinopyroxenes to form spherical clusters. The glassy matrix contains two glasses separated by sharp boundaries, likely representing immiscible melts derived from different lithologies. The hot particles were deposited on the surface among quartz- and dolomite-rich ejecta, followed by post-depositional precipitation of calcite and barite within glassy nodules. The results demonstrate that mafic minerals can crystallize from melts derived largely from sedimentary target rocks, with Fe supplied by the impactor, and that elemental partitioning and mineral textures record strong disequilibrium crystallization during rapid cooling.

Arizona↗

USGS2004

The microbial arsenic cycle in Mono Lake, California

Significant concentrations of dissolved inorganic arsenic can be found in the waters of a number of lakes located in the western USA and in other water bodies around the world. These lakes are often situated in arid, volcanic terrain. The highest concentrations of arsenic occur in hypersaline, closed basin soda lakes and their remnant brines. Although arsenic is a well-known toxicant to eukaryotes and prokaryotes alike, some prokaryotes have evolved biochemical mechanisms to exploit arsenic oxyanions (i.e., arsenate and arsenite); they can use them either as an electron acceptor for anaerobic respiration (arsenate), or as an electron donor (arsenite) to support chemoautotrophic fixation of CO 2 into cell carbon. Unlike in freshwater or marine ecosystems, these processes may assume quantitative significance with respect to the carbon cycle in arsenic-rich soda lakes. For the past several years our research has focused on the occurrence and biogeochemical manifestations of these processes in Mono Lake, a particularly arsenic-rich environment. Herein we review some of our findings concerning the biogeochemical arsenic cycle in this lake, with the hope that it may broaden the understanding of the influence of microorganisms upon the speciation of arsenic in more common, less “extreme” environments, such as drinking water aquifers.

California↗

USGS2011

40Ar∗ loss in experimentally deformed muscovite and biotite with implications for 40Ar/39Ar geochronology of naturally deformed rocks

The effects of deformation on radiogenic argon ( 40 Ar ∗ ) retentivity in mica are described from high pressure experiments performed on rock samples of peraluminous granite containing euhedral muscovite and biotite. Cylindrical cores, ∼15 mm in length and 6.25 mm in diameter, were drilled from granite collected from the South Armorican Massif in northwestern France, loaded into gold capsules, and weld-sealed in the presence of excess water. The samples were deformed at a pressure of 10 kb and a temperature of 600 °C over a period 29 of hours within a solid medium assembly in a Griggs-type triaxial hydraulic deformation apparatus. Overall shortening in the experiments was approximately 10%. Transmitted light and secondary and backscattered electron imaging of the deformed granite samples reveals evidence of induced defects and for significant physical grain size reduction by kinking, cracking, and grain segmentation of the micas. Infrared (IR) laser (CO 2 ) heating of individual 1.5–2.5 mm diameter grains of muscovite and biotite separated from the undeformed granite yield well-defined 40 Ar/ 39 Ar plateau ages of 311 ± 2 Ma (2σ). Identical experiments on single grains separated from the experimentally deformed granite yield results indicating 40 Ar ∗ loss of 0–35% in muscovite and 2–3% 40 Ar ∗ loss in biotite. Intragrain in situ ultraviolet (UV) laser ablation 40 Ar/ 39 Ar ages (±4–10%, 1σ) of deformed muscovites range from 309 ± 13 to 264 ± 7 Ma, consistent with 0–16% 40 Ar ∗ loss relative to the undeformed muscovite. The in situ UV laser ablation 40 Ar/ 39 Ar ages of deformed biotite vary from 301 to 217 Ma, consistent with up to 32% 40 Ar ∗ loss. No spatial correlation is observed between in situ 40 Ar/ 39 Ar age and position within individual grains. Using available argon diffusion data for muscovite the observed 40 Ar ∗ loss in the experimentally treated muscovite can be utilized to predict average 40 Ar ∗ diffusion dimensions. Maximum 40 Ar/ 39 Ar ages obtained by UV laser ablation overlap those of the undeformed muscovite, indicating argon loss of <1% and an average effective grain radius for 40 Ar ∗ diffusion ⩾700 μm. The UV laser ablation and IR laser incremental 40 Ar/ 39 Ar ages indicating 40 Ar ∗ loss of 16% and 35%, respectively, are consistent with an average diffusion radius ≪100 μm. These results support a hypothesis of grain-scale 40 Ar ∗ diffusion distances in undeformed mica and a heterogeneous mechanical reduction in the intragrain effective diffusion length scale for 40 Ar ∗ in deformed mica. Reduction in the effective diffusion length scale in naturally deformed samples occurs most probably through production of mesoscopic and submicroscopic defects such as, e.g., stacking faults. A network of interconnected defects, continuously forming and annealing during dynamic deformation likely plays an important role in controlling both 40 Ar ∗ retention and intragrain distribution in deformed mica. Intragrain 40 Ar/ 39 Ar ages, when combined with estimates of diffusion kinetics and distances, may provide a means of establishing thermochronological histories from individual micas.

Brittany↗

USGS2024

Ore mineralization in the Mofete and San Vito geothermal fields, Campi Flegrei volcanic complex, Naples, Italy

The Mofete and San Vito geothermal fields, located west of Naples, Italy, are part of the Campi Flegrei volcanic complex. In the 1970s, exploratory wells were drilled to a depth of ~3000 m in an attempt to locate high-enthalpy fluids for potential power production. Drill core samples from Mofete wells (MF1, MF2, and MF5) and from San Vito wells (SV1 and SV3) contain authigenic ore mineralization. Pyrite, pyrrhotite, and galena are abundant. Less common are chalcopyrite, sphalerite, arsenopyrite, and scheelite; rare are millerite, violarite, native bismuth, tellurobismuthite, cassiterite, molybdenite, and acanthite. Mineral chemistry was determined by electron microprobe wavelength dispersive spectroscopy aided by a scanning electron microscope equipped with energy-dispersive spectroscopy. The mineral assemblage suggests a low sulfidation environment and the absence of pyrrhotite in the MF1 well and upper part of the SV1 well indicates variable sulfur activity. Both molybdenite and scheelite were identified in samples SV1–2860 and SV3–2353 and scheelite in the SV3 well is zoned with variable Mo 6+ content; low Mo 6+ zones show blue cathodoluminescence, whereas, zones with high Mo 6+ content are yellow to brown. Zoned scheelite and the occurrence of both Mo-bearing minerals attest to the variability of ƒO 2 and ƒS 2 in the geothermal fluid.

Naples↗

USGS2010

Vadose zone attenuation of organic compounds at a crude oil spill site - Interactions between biogeochemical reactions and multicomponent gas transport

Contaminant attenuation processes in the vadose zone of a crude oil spill site near Bemidji, MN have been simulated with a reactive transport model that includes multicomponent gas transport, solute transport, and the most relevant biogeochemical reactions. Dissolution and volatilization of oil components, their aerobic and anaerobic degradation coupled with sequential electron acceptor consumption, ingress of atmospheric O 2 , and the release of CH 4 and CO 2 from the smear zone generated by the floating oil were considered. The focus of the simulations was to assess the dynamics between biodegradation and gas transport processes in the vadose zone, to evaluate the rates and contributions of different electron accepting processes towards vadose zone natural attenuation, and to provide an estimate of the historical mass loss. Concentration distributions of reactive (O 2 , CH 4 , and CO 2 ) and non-reactive (Ar and N 2 ) gases served as key constraints for the model calibration. Simulation results confirm that as of 2007, the main degradation pathway can be attributed to methanogenic degradation of organic compounds in the smear zone and the vadose zone resulting in a contaminant plume dominated by high CH 4 concentrations. In accordance with field observations, zones of volatilization and CH 4 generation are correlated to slightly elevated total gas pressures and low partial pressures of N 2 and Ar, while zones of aerobic CH 4 oxidation are characterized by slightly reduced gas pressures and elevated concentrations of N 2 and Ar. Diffusion is the most significant transport mechanism for gases in the vadose zone; however, the simulations also indicate that, despite very small pressure gradients, advection contributes up to 15% towards the net flux of CH 4 , and to a more limited extent to O 2 ingress. Model calibration strongly suggests that transfer of biogenically generated gases from the smear zone provides a major control on vadose zone gas distributions and vadose zone carbon balance. Overall, the model was successful in capturing the complex interactions between biogeochemical reactions and multicomponent gas transport processes. However, despite employing a process-based modeling approach, honoring observed parameter ranges, and generally obtaining good agreement between field observations and model simulations, accurate quantification of natural attenuation rates remains difficult. The modeling results are affected by uncertainties regarding gas phase saturations, tortuosities, and the magnitude of CH 4 and CO 2 flux from the smear zone. These findings highlight the need to better delineate gas fluxes at the model boundaries, which will help constrain contaminant degradation rates, and ultimately source zone longevity.

Minnesota↗

USGS2011

Mineralogy, morphology, and textural relationships in coatings on quartz grains in sediments in a quartz-sand aquifer

Mineralogical studies of coatings on quartz grains and bulk sediments from an aquifer on Western Cape Cod, Massachusetts, USA were carried out using a variety of transmission electron microscopy (TEM) techniques. Previous studies demonstrated that coatings on quartz grains control the adsorption properties of these sediments. Samples for TEM characterization were made by a gentle mechanical grinding method and focused ion beam (FIB) milling. The former method can make abundant electron-transparent coating assemblages for comprehensive and quantitative X-ray analysis and the latter technique protects the coating texture from being destroyed. Characterization of the samples from both a pristine area and an area heavily impacted by wastewater discharge shows similar coating textures and chemical compositions. Major constituents of the coating include Al-substituted goethite and illite/chlorite clays. Goethite is aggregated into well-crystallized domains through oriented attachment resulting in increased porosity. Illite/chlorite clays with various chemical compositions were observed to be mixed with goethite aggregates and aligned sub-parallel to the associated quartz surface. The uniform spatial distribution of wastewater-derived phosphorus throughout the coating from the wastewater-contaminated site suggests that all of the coating constituents, including those adjacent to the quartz surface, are accessible to groundwater solutes. Both TEM characterization and chemical extraction results indicate there is a significantly greater amount of amorphous iron oxide in samples from wastewater discharge area compared to those from the pristine region, which might reflect the impact of redox cycling of iron under the wastewater-discharge area. Coating compositions are consistent with the moderate metal and oxy-metalloid adsorption capacities, low but significant cation exchange capacities, and control of iron(III) solubility by goethite observed in reactive transport experimental and modeling studies conducted at the site.

Massachusetts↗

USGS2014

Integration of stable carbon isotope, microbial community, dissolved hydrogen gas, and 2 H H 2 O tracer data to assess bioaugmentation for chlorinated ethene degradation in fractured rocks

An in situ bioaugmentation (BA) experiment was conducted to understand processes controlling microbial dechlorination of trichloroethene (TCE) in groundwater at the Naval Air Warfare Center (NAWC), West Trenton, NJ. In the BA experiment, an electron donor (emulsified vegetable oil and sodium lactate) and a chloro-respiring microbial consortium were injected into a well in fractured mudstone of Triassic age. Water enriched in 2 H was also injected as a tracer of the BA solution, to monitor advective transport processes. The changes in concentration and the δ 13 C of TCE, cis-dichloroethene (cis-DCE), and vinyl chloride (VC); the δ 2 H of water; changes in the abundance of the microbial communities; and the concentration of dissolved H2 gas compared to pre- test conditions, provided multiple lines of evidence that enhanced biodegradation occurred in the injection well and in two downgradient wells. For those wells where the biodegradation was stimulated intensively, the sum of the molar chlorinated ethene (CE) concentrations in post-BA water was higher than that of the sum of the pre-BA background molar CE concentrations. The concentration ratios of TCE/(cis-DCE + VC) indicated that the increase in molar CE concentration may result from additional TCE mobilized from the rock matrix in response to the oil injection or due to desorption/diffusion. The stable carbon isotope mass-balance calculations show that the weighted average 13 C isotope of the CEs was enriched for around a year compared to the background value in a two year monitoring period, an effective indication that dechlorination of VC was occurring. Insights gained from this study can be applied to efforts to use BA in other fractured rock systems. The study demonstrates that a BA approach can substantially enhance in situ bioremediation not only in fractures connected to the injection well, but also in the rock matrix around the well due to processes such as diffusion and desorption. Because the effect of the BA was intensive only in wells where an amendment was distributed during injection, it is necessary to adequately distribute the amendments throughout the fractured rock to achieve substantial bioremediation. The slowdown in BA effect after a year is due to some extend to the decrease abundant of appropriate microbes, but more likely the decreased concentration of electron donor.

New Jersey↗

USGS2020

Sequential biodegradation of 1,2,4-trichlorobenzene at oxic-anoxic groundwater interfaces in model laboratory columns

Halogenated organic solvents such as chlorobenzenes (CBs) are frequent groundwater contaminants due to legacy spills. When contaminated anaerobic groundwater discharges into surface water through wetlands and other transition zones, aeration can occur from various physical and biological processes at shallow depths, resulting in oxic-anoxic interfaces (OAIs). This study investigated the potential for 1,2,4-trichlorobenzene (1,2,4-TCB) biodegradation at OAIs. A novel upflow column system was developed to create stable anaerobic and aerobic zones, simulating a natural groundwater OAI. Two columns containing (1) sand and (2) a mixture of wetland sediment and sand were operated continuously for 295 days with varied doses of 0.14-1.4 mM sodium lactate (NaLac) as a model electron donor. Both column matrices supported anaerobic reductive dechlorination and aerobic degradation of 1,2,4-TCB spatially separated between anaerobic and aerobic zones. Reductive dechlorination produced a mixture of di- and monochlorobenzene daughter products, with estimated zero-order dechlorination rates up to 31.3 µM/hr. Aerobic CB degradation, limited by available dissolved oxygen, occurred for 1,2,4-TCB and all dechlorinated daughter products. Initial reductive dechlorination did not enhance the overall observed extent or rate of subsequent aerobic CB degradation. Increasing NaLac dose increased the extent of reductive dechlorination, but suppressed aerobic CB degradation at 1.4 mM NaLac due to increased oxygen demand. 16S-rRNA sequencing of biofilm microbial communities revealed strong stratification of functional anaerobic and aerobic organisms between redox zones including the sole putative reductive dechlorinator detected in the columns, Dehalobacter. The sediment mixture column supported enhanced reductive dechlorination compared to the sand column at all tested NaLac doses and growth of Dehalobacter populations up to 4.1×108 copies/g (51% relative abundance), highlighting the potential benefit of sediments in reductive dechlorination processes. Results from these model systems suggest both substantial anaerobic and aerobic CB degradation can co-occur along the OAI at contaminated sites where bioavailable electron donors and oxygen are both present.

Journal of Contaminant Hydrology↗

USGS2011

Microstructure and crystallographic preferred orientation of polycrystalline microgarnet aggregates developed during progressive creep, recovery, and grain boundary sliding

Optical microscopy, electron probe microanalysis, and electron backscatter diffraction methods have been used to examine a broad range of garnet microstructures within a high strain zone that marks the western margin of a major transpression zone in the southern New England Appalachians. Garnet accommodated variable states of finite strain, expressed as low strain porphyroclasts (Type 1), high strain polycrystalline aggregates (Type 2), and transitional morphologies (Type 3) that range between these end members. Type 1 behaved as rigid porphyroclasts and is characterized by four concentric Ca growth zones. Type 2 help define foliation and lineation, are characterized by three Ca zones, and possess a consistent bulk crystallographic preferred orientation of (100) symmetrical to the tectonic fabric. Type 3 show variable degrees of porphyroclast associated with aggregate, where porphyroclasts display complex compositional zoning that corresponds to lattice distortion, low-angle boundaries, and subgrains, and aggregate CPO mimics porphyroclast orientation. All aggregates accommodated a significant proportion of greenschist facies deformation through grain boundary sliding, grain rotation and impingement, and pressure solution, which lead to a cohesive behavior and overall strain hardening of the aggregates. The characteristic CPO could not have been developed in this manner, and was the result of an older phase of partitioned amphibolite facies dislocation creep, recovery including chemical segregation, and recrystallization of porphyroclasts. This study demonstrates the significance of strain accommodation within garnet and its affect on composition under a range of PT conditions, and emphasizes the importance of utilizing EBSD methods with studies that rely upon a sound understanding of garnet. ?? 2010 Elsevier Ltd.

Journal of Structural Geology↗

USGS2005

The 2003 phreatomagmatic eruptions of Anatahan volcano - Textural and petrologic features of deposits at an emergent island volcano

Stratigraphic and field data are used in conjunction with textural and chemical evidence (including data from scanning electron microscope, electron microprobe, X-ray fluorescence, X-ray diffraction, and instrumental neutron activation analysis) to establish that the 2003 eruption of Anatahan volcano was mainly phreatomagmatic, dominated by explosive interaction of homogeneous composition low-viscosity crystal-poor andesite magma with water. The hydromagmatic mode of eruption contributed to the significant height of initial eruptive columns and to the excavation and eruption of altered rock debris from the sub-volcanic hydrothermal system. Volatile contents of glass inclusions in equilibrium phenocrysts less abundances of these constituents in matrix glass times the estimated mass of juvenile magma indicate minimum emissions of 19 kt SO2 and 13 kt Cl. This petrologic estimate of SO2 emission is an order-of-magnitude less than an estimate from TOMS. Similarly, inferred magma volumes from the petrologic data are an order of magnitude greater than those modeled from deformation data. Both discrepancies indicate additional sources of volatiles, likely derived from a separate fluid phase in the magma. The paucity of near-source volcanic-tectonic earthquakes preceding the eruption, and the dominance of sustained long-period tremor are attributed to the ease of ascent of the hot low-viscosity andesite, followed by a shallow phreatomagmatic mode of eruption. Phreatomagmatic eruptions are probably more common at emergent tropical island volcanoes, where shallow fresh-water lenses occur at near-sea-level vents. These relations suggest that phreatomagmatic explosions contributed to the formation of many of the near-sea-level craters and possibly even to the small calderas at the other Mariana islands.

Northern Mariana Islands↗

USGS2008

Characteristics, extent and origin of hydrothermal alteration at Mount Rainier Volcano, Cascades Arc, USA: Implications for debris-flow hazards and mineral deposits

Hydrothermal alteration at Mount Rainier waxed and waned over the 500,000-year episodic growth of the edifice. Hydrothermal minerals and their stable-isotope compositions in samples collected from outcrop and as clasts from Holocene debris-flow deposits identify three distinct hypogene argillic/advanced argillic hydrothermal environments: magmatic-hydrothermal, steam-heated, and magmatic steam (fumarolic), with minor superimposed supergene alteration. The 3.8 km 3 Osceola Mudflow (5600 y BP) and coeval phreatomagmatic F tephra contain the highest temperature and most deeply formed hydrothermal minerals. Relatively deeply formed magmatic-hydrothermal alteration minerals and associations in clasts include quartz (residual silica), quartz–alunite, quartz–topaz, quartz–pyrophyllite, quartz–dickite/kaolinite, and quartz–illite (all with pyrite). Clasts of smectite–pyrite and steam-heated opal–alunite–kaolinite are also common in the Osceola Mudflow. In contrast, the Paradise lahar, formed by collapse of the summit or near-summit of the edifice at about the same time, contains only smectite–pyrite and near-surface steam-heated and fumarolic alteration minerals. Younger debris-flow deposits on the west side of the volcano (Round Pass and distal Electron Mudflows) contain only low-temperature smectite–pyrite assemblages, whereas the proximal Electron Mudflow and a < 100 y BP rock avalanche on Tahoma Glacier also contain magmatic-hydrothermal alteration minerals that are exposed in the avalanche headwall of Sunset Amphitheater, reflecting progressive incision into deeper near-conduit alteration products that formed at higher temperatures. The pre-Osceola Mudflow alteration geometry is inferred to have consisted of a narrow feeder zone of intense magmatic-hydrothermal alteration limited to near the conduit of the volcano, which graded outward to more widely distributed, but weak, smectite–pyrite alteration within 1 km of the edifice axis, developed chiefly in porous breccias. The edifice was capped by a steam-heated alteration zone, most of which resulted from condensation of fumarolic vapor and oxidation of H 2 S in the unsaturated zone above the water table. Weakly developed smectite–pyrite alteration extended into the west and east flanks of the edifice, spatially associated with dikes that are localized in those sectors; other edifice flanks lack dikes and associated alteration. The Osceola collapse removed most of the altered core and upper east flank of the volcano, but intensely altered rocks remain on the uppermost west flank. Major conclusions of this study are that: (1) Hydrothermal–mineral assemblages and distributions at Mount Rainier can be understood in the framework of hydrothermal processes and environments developed from studies of ore deposits formed in analogous settings. (2) Frequent eruptions supplied sufficient hot magmatic fluid to alter the upper interior of the volcano hydrothermally, despite the consistently deep (≥ 8 km) magma reservoir which may have precluded formation of economic mineral deposits within or at shallow depths beneath Mount Rainier. The absence of indicator equilibrium alteration-mineral assemblages in the debris flows that effectively expose the volcano to a depth of 1–1.5 km also suggests a low potential for significant high-sulfidation epithermal or porphyry-type mineral deposits at depth. (3) Despite the long and complex history of the volcano, intensely altered collapse-prone rocks were spatially restricted to near the volcano's conduit system and summit, and short distances onto the upper east and west flanks, due to the necessary supply of reactive components carried by ascending magmatic fluids. (4) Intensely altered rocks were removed from the summit, east flank, and edifice interior by the Osceola collapse, but remain on the upper west flank in the Sunset Amphitheater area and present a continuing collapse hazard. (5) Visually conspicuous rocks on the lower east and mid-to-lower west flanks are not intensely altered and probably have not significantly weakened the rock, and thus do not present significant collapse hazards. (6) Alteration developed most intensely within breccia units, because of their high permeability and porosity. Volcanoes with abundant near-conduit upper-edifice breccias are prone to alteration increasing the possibility of collapse, whereas those that are breccia-poor (e.g., massive domes) are less prone to alteration.

Journal of Volcanology and Geothermal Research↗