USGS ScienceSearch

SEARCH · USGS Science

Results for “Spectroscopy”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 325 records · Page 18Linked to original sources

On the formation and structure of rare-earth element complexes in aqueous solutions under hydrothermal conditions with new data on gadolinium aqua and chloro complexes

Synchrotron X-ray spectroscopy experiments were made on the Gd(III) aqua and chloro complexes in low pH aqueous solutions at temperatures ranging from 25 to 500????C and at pressures up to 480??MPa using a hydrothermal diamond anvil cell. Analysis of fluorescence Gd L3-edge X-ray absorption fine structure (XAFS) spectra measured from a 0.006m Gd/0.16m HNO3 aqueous solution at temperatures up to 500????C and at pressures up to 260??MPa shows that the Gd-O distance of the Gd3+ aqua ion decreases steadily at a rate of ??? 0.007??A??/100????C whereas the number of coordinated H2O molecules decreases from 9.0 ?? 0.5 to 7.0 ?? 0.4. The loss of water molecules in the Gd3+ aqua ion inner hydration shell over this temperature range (a 22% reduction) is smaller than exhibited by the Yb3+ aqua ion (42% reduction) indicating that the former is significantly more stable than the later. We conjecture that the anomalous enrichment of Gd reported from measurement of REE concentrations in ocean waters may be attributed to the enhanced stability of the Gd3+ aqua ion relative to other REEs. Gd L3-edge XAFS measurements of 0.006m and 0.1m GdCl3 aqueous solutions at temperatures up to 500????C and pressures up to 480??MPa reveal that the onset of significant Gd3+-Cl- association occurs around 300????C. Partially-hydrated stepwise inner-sphere complexes most likely of the type Gd(H2O)??-nCln+3-n occur in the chloride solutions at higher temperatures, where ?? ??? 8 at 300????C decreasing slightly to an intermediate value between 7 and 8 upon approaching 500????C. This is the first direct evidence for the occurrence of partially-hydrated REE Gd (this study) and Yb [Mayanovic, R.A., Jayanetti, S., Anderson, A.J., Bassett, W.A., Chou, I-M., 2002a. The structure of Yb3+ aquo ion and chloro complexes in aqueous solutions at up to 500 ??C and 270 MPa. J. Phys. Chem. A 106, 6591-6599.] chloro complexes in hydrothermal solutions. The number of chlorides (n) of the partially-hydrated Gd(III) chloro complexes increases steadily with temperature from 0.4 ?? 0.2 to 1.7 ?? 0.3 in the 0.006m chloride solution and from 0.9 ?? 0.7 to 1.8 ?? 0.7 in the 0.1m GdCl3 aqueous solution in the 300-500????C range. Conversely, the number of H2O ligands of Gd(H2O)??-nCln+3-n complexes decreases steadily from 8.9 ?? 0.4 to 5.8 ?? 0.7 in the 0.006m GdCl3 aqueous solution and from 9.0 ?? 0.5 to 5.3 ?? 1.0 in the 0.1m GdCl3 aqueous solution at temperatures from 25 to 500????C. Analysis of our results shows that the chloride ions partially displace the inner-shell water molecules during Gd(III) complex formation under hydrothermal conditions. The Gd-OH2 bond of the partially-hydrated Gd(III) chloro complexes exhibits slightly smaller rates of length contraction (??? 0.005??A??/100????C) for both solutions. The structural aspects of chloride speciation of Gd(III) as measured from this study and of Yb(III) as measured from our previous experiments are consistent with the solubility of these and other REE in deep-sea hydrothermal fluids. ?? 2006 Elsevier B.V. All rights reserved.

Chemical Geology

Experimental determination of the phase boundary between kornelite and pentahydrated ferric sulfate at 0.1MPa

Recent findings of various ferric sulfates on Mars emphasize the importance of understanding the fundamental properties of ferric sulfates at temperatures relevant to that of Martian surface. In this study, the phase boundary between kornelite (Fe2(SO4)3.7H2O) and pentahydrated ferric sulfate (Fe2(SO4)3.5H2O) was experimentally determined using the humidity-buffer technique together with gravimetric measurements and Raman spectroscopy at 0.1MPa in the 36-56??C temperature range. Through the thermodynamic analysis of our experimental data, the enthalpy change (-290.8??0.3kJ/mol) and the Gibbs free energy change (-238.82??0.02kJ/mol) for each water molecule of crystallization in the rehydration of pentahydrated ferric sulfate to kornelite were obtained. ?? 2011 Elsevier B.V.

Chemical Geology

Stability of mercury concentration measurements in archived soil and peat samples

Archived soil samples can provide important information on the history of environmental contamination and by comparison with recently collected samples, temporal trends can be inferred. Little previous work has addressed whether mercury (Hg) concentrations in soil samples are stable with long-term storage under standard laboratory conditions. In this study, we have re-analyzed using cold vapor atomic adsorption spectroscopy a set of archived soil samples that ranged from relatively pristine mountainous sites to a polluted site near a non-ferrous metal smelter with a wide range of Hg concentrations (6 - 6485 µg kg-1). Samples included organic and mineral soils and peats with a carbon content that ranged from 0.2 to 47.7%. Soil samples were stored in polyethylene bags or bottles and held in laboratory rooms where temperature was not kept to a constant value. Mercury concentrations in four subsets of samples were originally measured in 2000, 2005, 2006 and 2007, and re-analyzed in 2017, i.e. after 17, 12, 11 and 10 years of storage. Statistical analyses of either separated or lumped data yielded no significant differences between the original and current Hg concentrations. Based on these analyses, we show that archived soil and peat samples can be used to evaluate historical soil mercury contamination.

Chemosphere

Surface complexation model of uranyl sorption on Georgia kaolinite

The adsorption of uranyl on standard Georgia kaolinites (KGa-1 and KGa-1B) was studied as a function of pH (3–10), total U (1 and 10 μmol/l), and mass loading of clay (4 and 40 g/l). The uptake of uranyl in air-equilibrated systems increased with pH and reached a maximum in the near-neutral pH range. At higher pH values, the sorption decreased due to the presence of aqueous uranyl carbonate complexes. One kaolinite sample was examined after the uranyl uptake experiments by transmission electron microscopy (TEM), using energy dispersive X-ray spectroscopy (EDS) to determine the U content. It was found that uraniumwas preferentially adsorbed by Ti-rich impurity phases (predominantly anatase), which are present in the kaolinite samples. Uranyl sorption on the Georgia kaolinites was simulated with U sorption reactions on both titanol and aluminol sites, using a simple non-electrostatic surface complexation model (SCM). The relative amounts of U-binding >TiOH and >AlOH sites were estimated from the TEM/EDS results. A ternary uranyl carbonate complex on the titanol site improved the fit to the experimental data in the higher pH range. The final model contained only three optimised log K values, and was able to simulate adsorption data across a wide range of experimental conditions. The >TiOH (anatase) sites appear to play an important role in retaining U at low uranyl concentrations. As kaolinite often contains trace TiO 2 , its presence may need to be taken into account when modelling the results of sorption experiments with radionuclides or trace metals on kaolinite.

Applied Clay Science

Chemical evolution of Miocene wood: Example from the Belchatow brown coal deposit, central Poland

Miocene conifer wood samples from the Belchatow brown coal deposit in Poland were studied in order to discuss a range of chemical variations that occur as a result of biochemical coalification. Petrographic analysis, ultimate analysis, electron microprobe technique, and FTIR spectroscopy were used in this study. Our data show several progressive trends in functional groups distribution that take place during the wood transformation from group 1 to group 4, such as an overall increase in aromaticity, an increase in lignin/cellulose ratio, and an increase in oxygen functionalities. Other observations include an increase in aliphatic stretching and bending functionalities from groups 1 to 3; followed by a decrease in the wood of group 4; appearance of aliphatic out-of-plane bands in group 3 and increase in group 4; an increase in CH2/CH3 in group 4 compared to the other groups; and decrease in O-H groups in group 4 compared to other groups. These observations, together with other chemical and petrological observations, indicate that the progressive elimination of cellulose and modification of lignin are dominant processes of the wood transformation. ?? 2005 Elsevier B.V. All rights reserved.

International Journal of Coal Geology

Compression-cuticle relationship of seed ferns: Insights from liquid-solid states FTIR (Late Palaeozoic-Early Mesozoic, Canada-Spain-Argentina)

Cuticles have been macerated from suitably preserved compressed fossil foliage by Schulze's process for the past 150 years, whereas the physical-biochemical relationship between the "coalified layer" with preserved cuticle as a unit has hardly been investigated, although they provide complementary information. This relationship is conceptualized by an analogue model of the anatomy of an extant leaf: "vitrinite (mesophyll) + cuticle (biomacropolymer) = compression". Alkaline solutions from Schulze's process as a proxy for the vitrinite, are studied by means of liquid-solid states Fourier transform infrared spectroscopy (FTIR). In addition, cuticle-free coalified layers and fossilized cuticles of seed ferns mainly from Canada, Spain and Argentina of Late Pennsylvanian-Late Triassic age are included in the study sample. Infrared data of cuticle and alkaline solutions differ which is primarily contingent on the mesophyll +biomacropolymer characteristics. The compression records two pathways of organic matter transformation. One is the vitrinized component that reflects the diagenetic-post-diagenetic coalification history parallel with the evolution of the associated coal seam. The other is the cuticle that reflects the sum-total of evolutionary pathway of the biomacropolymer, its monomeric, or polymeric fragmentation, though factors promoting preservation include entombing clay minerals and lower pH conditions. Caution is advised when interpreting liquid-state-based FTIR data, as some IR signals may have resulted from the interaction of Schulze's process with the cuticular biochemistry. A biochemical-study course for taphonomy is suggested, as fossilized cuticles, cuticle-free coalified layers, and compressions are responses to shared physicogeochemical factors. ?? 2009 Elsevier B.V. All rights reserved.

International Journal of Coal Geology

Phytochemistry of the fossilized-cuticle frond Macroneuropteris macrophylla (Pennsylvanian seed fern, Canada)

In Canada's Sydney Coalfield, specimens of the extinct Carboniferous seed fern Macroneuropteris macrophylla (Brongniart) invariably show preservation stages intermediate between compression and fossilized-cuticle, even concerning a single pinnule. In this interdisciplinary approach, we study a ca. 300 to 350 mm long fossilized-cuticle-preserved frond section of M. macrophylla (Brongniart) that represents about one third of the length of a frond that was originally 1 m long. Size and preservation allow us to study the phytochemistry of the cuticle biomacropolymers over the length of the frond to assess what impact, if any, results would have on Carboniferous palaeophytochemotaxonomy. For comparison, the phytochemistry of compressions with their extracted cuticles from the same species and the same sample locality is also investigated. We use solid- and liquid-state, semi-quantitative Fourier transform infrared spectroscopy (FTIR) for the chemical characterization of the frond.Based on our results, we infer an essentially uniform phytochemistry over the fossilized-cuticle frond, suggesting that only a single pinnule needs to be analyzed to get an overall phytochemical picture of the frond, which has been our long-time working hypothesis. We distinguish between phytochemistry and cutinization. The latter is much less pronounced above than below the frond dichotomy, and we suggest a palaeoecological cause, rather than differing pathways of organic matter transformation. Moreover, cuticles below and above the frond dichotomy have essentially the same epidermal pattern, but those from below have features that may have been an adaptation to prevent stomatal flooding during the tropical, rainy season.This study suggests that chemically the fossilized-cuticle is more similar to the compression than to the cuticle obtained from that compression of the same species which invites reevaluation of the classical compression concept. ?? 2010 Elsevier B.V.

International Journal of Coal Geology

Notes on the origin of copromacrinite based on nitrogen functionalities and δ13C and δ15N determined on samples from the Peach Orchard coal bed, southern Magoffin County, Kentucky

This paper represents the first attempt to show, by means other than just petrographic ones, that one type of macrinite, herein designated copromacrinite, may result from macrofauna feces. For that purpose a combination of coal petrography, X-ray photoelectron spectroscopy, and elemental-analysis continuous-flow isotope ratio mass spectrometry methods were used to determine nitrogen functionalities and δ 13 C and δ 15 N compositions in 1) vitrinite-rich, 2) fusinite + semifusinite-rich, and 3) macrinite-rich (with a possible coprolitic origin) samples of the high volatile A bituminous Peach Orchard coal (Bolsovian; Middle Pennsylvanian) from Magoffin County, Kentucky. There were no significant differences between pyridinic-N and quaternary-N abundance in the three samples, however, pyrrolic-N was higher (~ 54%) in the macrinite-rich sample than in the other two samples (~ 38%). The data suggest that pyridinic-N and quaternary-N are independent of maceral group composition and that pyrrolic-N is dependent on maceral composition (fusinite + semifusinite versus macrinite). δ 13 C values obtained for bulk and demineralized coal of the vitrinite- and fusinite + semifusinite-rich samples are similar with δ 13 C values of − 24.80 ± 0.01‰ VPDB and − 24.61 ± 0.09‰ VPDB for bulk samples and − 24.81 ± 0.07‰ VPDB and − 24.52 ± 0.04‰ VPDB for demineralized samples. These values are within the expected range for vitrinite-rich samples and the slightly higher δ 13 C value of the fusinite + semifusinite-rich sample is expected as δ 13 C values for inertinite are higher than for vitrinite. However, there was a significant shift to a lower δ 13 C value (− 26.80 ± 0.01‰ VPDB for the bulk sample value) for the macrinite-rich sample. Because the samples are basically isorank, and δ 13 C (and δ 15 N) shifts do not occur during maturation until anthracite rank, the difference may be related to the presence or composition of the macrinite within the sample which lacks heat-effect indicators, such as devolatilization vacuoles and distorted pores. δ 15 N values are also similar for bulk and demineralized coal of the vitrinite- and fusinite + semifusinite-rich samples, and the bulk values were heavier in this samples (3.07 ± 0.03‰ Air and 2.92 ± 0.10‰ Air, respectively), and much lighter (− 2.83 ± 0.09‰ Air) for the macrinite-rich sample. The study of Peach Orchard coal samples using reflected-light microscopy, isotopic composition, and nitrogen-forms analyses revealed that the macrinite-rich sample contains macrinite with coprolitic features (e.g. oxidation rind, mix of undigested palynomorphs, frequent and randomly located funginite, agglutination pulp of semifusinite reflectance, internal lack of bedding fabric, and suggestion of structures resulting from intestines and stomach walls), more pyrrolic-N (~ 16%), and lower δ 13 C (~ 2‰ VPDB) and δ 15 N (~ 4‰ Air) values than the vitrinite and semifusinite + fusinite rich samples. These findings suggest that the maceral macrinite has multiple origins based on petrography and measurable chemical differences between the macrinite, vitrinite, and semifusinite + fusinite fractions within the coal. Assuming that copromacrinite observed is an excretion then the anomalies observed may result from the symbiotic relations between the macrofauna (e.g. cockroaches) and microbiota during the digestive processes, and the nitrogen balance mechanisms inside macrofauna body.

Kentucky

High microscale variability in Raman thermal maturity estimates from shale organic matter

Raman spectroscopy has recently received attention as a means to estimate thermal maturity of organic matter in petroleum generating source rocks to complement more traditional approaches such as vitrinite reflectance and programmed pyrolysis. While many studies have observed positive correlations between source rock thermal maturity and Raman spectral parameters, little attention has been given to the degree of variation in the Raman response across individual organic grains, especially for shales or mudrocks with highly dispersed organic matter. Here the spatial variation in Raman estimates of thermal maturity within individual organic grains is assessed from shales from the Boquillas, Marcellus, Niobrara, and Woodford Formations. The thermal maturity parameters extracted from Raman spectra can vary widely across distances of ≤5 μm within the same organic grain. These results illustrate the high degree of chemical heterogeneity inherent to the organic matter within these source rocks. Additionally, the spatial pattern of the Raman parameters, as revealed by 2D Raman mapping, imply that organic matter structure is influenced by associations with mineral surfaces within the surrounding rock matrix. Chemical heterogeneity and matrix effects directly impact the Raman response from these types of materials and thus the extracted thermal maturity estimate. These findings highlight the care which must be adopted when making Raman measurements of organic matter within source rock matrices, especially for samples which feature highly dispersed, heterogeneous organic matter as found in petroliferous mudrocks.

International Journal of Coal Geology

Sample mounting for organic petrology: No thermal effects from transient exposure to elevated temperatures

For sample mounting, organic petrology laboratories typically use cold-setting epoxy-resin (e.g., 40 °C, used by Oklahoma Geological Survey, OGS) or heat-setting thermoplastic (e.g., 180 °C, used by U.S. Geological Survey, USGS). Previous workers have suggested a systematic huminite/vitrinite reflectance (VR o ) increase was associated with the thermoplastic preparation process, relative to epoxy mounting, which was possibly attributed to moisture loss from organic matter due to the transient high temperatures of plastic mounting. In this study, we evaluated thermal effects to low thermal maturity organic matter from transient exposure to elevated temperatures. A subbituminous coal sample was subjected to long-term (4 to 38 weeks) exposure to temperatures of 85 to 120 °C and afterward evaluated by multiple approaches to test thermal advance [elemental analyses, Rock-Eval pyrolysis, Fourier transform infrared spectroscopy (FTIR), nuclear magnetic resonance (NMR), pyrolysis gas chromatography, and petrographic analyses, including huminite/vitrinite reflectance and spectral fluorescence], all of which showed no detectable systematic (statistically insignificant) changes between the original sample and its heat-treated products. We also compared huminite/vitrinite reflectance of six low thermal maturity samples (those most likely to react to transient heating) mounted via both cold-setting epoxy-resin and heat-setting thermoplastic. Results indicate measured VR o of a sample prepared by one mounting process was within the standard deviation of reflectance for the same sample prepared via the other process. Moreover, VR o results were not systematically higher in thermoplastic mounts. Contrary to previous work, these results suggest thermoplastic mounting or other transient exposure to elevated temperatures does not impact thermal maturity estimates from reflectance measurement for low thermal maturity organic samples. Furthermore, the average interlaboratory difference in measured VR o (between OGS and USGS) for the same sample prepared by either epoxy-resin or thermoplastic mounting was 0.038%, about double the average difference between VR o for the same sample prepared via epoxy-resin versus thermoplastic in a single laboratory (0.024%). This result indicates interlaboratory variability impacts VR o measurement reproducibility to the extent that systematic differences could not be observed between thermoplastic and cold-setting sample preparation approaches, even if such differences were present.

International Journal of Coal Geology

Evaluating aromatization of solid bitumen generated in the presence and absence of water: Implications for solid bitumen reflectance as a thermal proxy

Geological models for petroleum generation suggest thermal conversion of oil-prone sedimentary organic matter in the presence of water promotes increased liquid saturate yield, whereas absence of water causes formation of an aromatic, cross-linked solid bitumen residue. To test the influence of hydrogen from water, organic-rich (22 wt% total organic carbon , TOC) mudrock samples from the Eocene lacustrine Green River Formation Mahogany zone oil shale were pyrolyzed under hydrous and anhydrous conditions in closed system batch reactors at temperatures between 300 and 370 °C for 72 h. Pre- and post-pyrolysis samples were characterized using petrographic approaches including optical microscopy , reflectance, Raman spectroscopy , and scanning electron and transmission electron microscopy to quantify differences in relative appearance, abundance, and composition of solid bitumen newly generated during the pyrolysis experiments. Petrographic analyses were supplemented by geochemical screening measurements (TOC content and programmed temperature pyrolysis). Results show post-hydrous pyrolysis residues contain lower TOC, are comprised of solid bitumen with greater aromaticity , and have textures indicative of lower viscosities, relative to anhydrous residues from the same temperature pyrolysis conditions. These observations suggest solid bitumen forming from thermal conversion of oil-prone sedimentary organic matter under anhydrous conditions may be less aromatic, although more cross-linked, than solid bitumen forming under hydrous conditions at the same time-temperature combination. To explain these results, we suggest that a radical disproportionation mechanism is favored in the presence of hydrogen donated from water, and that this disproportionation promotes aromatization in the solid residue with concomitant expulsion of saturated hydrocarbons.

International Journal of Coal Geology

Maturation study of vitrinite in carbonaceous shales and coals: Insights from hydrous pyrolysis

The presence of vitrinite in sedimentary rocks of post-Silurian age allows its reflectance to be used to estimate the thermal maturation of organic matter in petroleum systems. Increasing reflectance of vitrinite, which is primarily driven by aromaticity, depends primarily on the time and temperature attributes of its evolutionary pathway. This study evaluated carbonaceous shales proximal to coal measures and coal samples via isothermal hydrous pyrolysis (HP) to compare differences in the maturation pathways of vitrinite. Sample residues were analysed via vitrinite reflectance (VRo), geochemical screening tests (organic carbon and programmed temperature pyrolysis), and infrared spectroscopy. The study included samples from Indian and North American basins, to observe differences in vitrinite evolution with respect to enclosing mineral matrix, starting degree of aromaticity, organic matter types, stratigraphic age, and depositional environment. The organic content of HP residues shows an intuitive response to the thermal stress of HP, e.g., a general depletion of total organic carbon (TOC) content, pyrolyzate (S2), and hydrogen index with increasing HP temperature. Infrared proxies including C-factor and CH2/CH3 generally decrease with increasing thermal maturity indicating loss of O via CO2 generation and the thermal cracking of aliphatic organic matter. Tmax, production index (PI), and VRo show intuitive increasing values with respect to HP temperature. The least mature sample (0.48 ± 0.05% VRo) generally experienced the maximum change in these parameters during maturation, whereas the most mature sample (0.99 ± 0.06% VRo) generally showed the least change. This observation is consistent with higher kinetic barriers to reaction in more aromatic vitrinite which contains higher bond dissociation energies. Devolatilization of vitrinite during HP causes formation of gas evacuation vacuoles and contraction cracks in the vitrinite grains of both coal and carbonaceous shale. Similarities in vitrinite response to HP between coal and carbonaceous shale suggest that thermal evolution of the vitrinite maceral is principally controlled by inherent rate-limiting kinetic parameters related to its molecular structure. Whereas, the stratigraphic age, sedimentary environment, surrounding organic matter, lithology, and catalysis by mineral composition have less effect. To further improve our understanding of vitrinite aromatization and kinetic parameters, future studies of vitrinite reflectance thermal evolution with temperature should include coal and carbonaceous shale from the same stratigraphic section and extant woody tissue from modern vascular plants.

International Journal of Coal Geology

Pore systems and organic petrology of cretaceous Mowry and Niobrara source-rock reservoirs, Powder River Basin, Wyoming, USA

The Powder River Basin (PRB) is a world-class oil province, in large part thanks to contributions from premier source rocks, Cretaceous Mowry and Niobrara shales. Both formations are also unconventional reservoirs. A critical aspect of evaluating production potential and finding sweet spots is the nature of the pore systems in these fine-grained source-rock reservoirs. Variation by stratigraphic interval is important for selecting optimum target zones for horizontal wells. Understanding variation in pore type, size, and connectivity and relationships with mineralogy and fabric help in determining prospectivity in different parts of the basin. Deciphering controls on pore-system development helps predict intervals and locations of optimum reservoir quality. Imaging of Niobrara and Mowry samples from a range of thermal maturities provided observations and data on pore systems, organic matter (OM) types and associations with mineralogy and fabric, wettability, and microporosity associated with both diagenetic and detrital clays. Imaging techniques included scanning electron microscopy, organic petrography and correlative scanning electron microscopy, and mapping of mineralogy through energy dispersive spectroscopy. Mean solid bitumen (BR o ) and vitrinite reflectance (VR o ) values indicate all samples are in the oil window with values ranging from 0.52 to 1.15%. Organic fluorescence is prominent in amorphous OM, solid bitumen and some vitrinite in the early oil window. The fluorescence is extinguished at higher thermal maturity. Carbonate pellets (in Niobrara) mainly contain migrated solid bitumen and residual live oil and little or no terrigenous OM (vitrinite and inertinite). However, terrigenous OM is common in siliceous/argillaceous laminae in both formations, where it occurs with amorphous OM, some of which has converted in situ to a solid bitumen petroleum residue. One key finding is the widespread presence of migrated OM at very early oil window maturity. Distribution of such OM and associated wettability alteration is fabric-controlled, at all levels of thermal maturity studied. Clay morphology and abundance and supporting rigid mineral grain framework strongly influence pore development, preservation, and connectivity in both formations. Carbonate content is a good proxy for reservoir quality in Niobrara intervals due to association of porous solid bitumen with calcareous fecal pellets. High recrystallized microquartz content is associated with the best reservoir intervals in the Mowry.

Wyoming

Deep syntectonic burial of the Anthracite belt, Eastern Pennsylvania

Fluid inclusion microthermometry and Raman spectroscopy of fluid inclusions in quartz veins from the Pennsylvanian rocks of the Anthracite belt, eastern Pennsylvania support a deep burial model of coalification in favor of focused orogenic hot fluid flow. High-temperature (250 to 255 °C) trapping of CH 4 ± CO 2 saturated aqueous fluids and CH 4 ± CO 2 inclusions indicate fluid trapping at depths of 11.5 to 13.4 km under a cover of Pennsylvanian to Permian(?) syntectonic load. In the folded rocks to the south of the Anthracite belt, CH 4 ± CO 2 fluid inclusions indicate a sediment load that was up to 16.3 km thick. Re -equilibrated aqueous fluid inclusions from veins in Silurian through Devonian rocks give the same range of trapping conditions but a wide range of fluid salinities suggesting that folding, fracturing, and meteoric recharge resulted in the intermixing of fluids from throughout the stratigraphic succession.

Pennsylvania

The airborne lava-seawater interaction plume at Kilauea Volcano, Hawai'i

Lava flows into the sea at Kīlauea Volcano, Hawaiʻi, and generates an airborne gas and aerosol plume. Water (H 2 O), hydrogen chloride (HCl), carbon dioxide (CO 2 ), nitrogen dioxide (NO 2 ) and sulphur dioxide (SO 2 ) gases were quantified in the plume in 2004–2005, using Open Path Fourier Transform infra-red Spectroscopy. The molar abundances of these species and thermodynamic modelling are used to discuss their generation. The range in molar HCl / H 2 O confirms that HCl is generated when seawater is boiled dry and magnesium salts are hydrolysed (as proposed by [T.M. Gerlach, J.L. Krumhansl, R.O. Fournier, J. Kjargaard, Acid rain from the heating and evaporation of seawater by molten lava: a new volcanic hazard, EOS (Trans. Am. Geophys. Un.) 70 (1989) 1421–1422]), in contrast to models of Na-metasomatism. Airborne droplets of boiled seawater brine form nucleii for subsequent H 2 O and HCl condensation, which acidifies the droplets and liberates CO 2 gas from bicarbonate and carbonate. NO 2 is derived from the thermal decomposition of nitrates in coastal seawater, which takes place as the lava heats droplets of boiled seawater brine to 350–400 °C. SO 2 is derived from the degassing of subaerial lava flows on the coastal plain. The calculated mass flux of HCl from a moderate-sized ocean entry significantly increases the total HCl emission at Kīlauea (including magmatic sources) and is comparable to industrial HCl emitters in the United States. For larger lava ocean entries, the flux of HCl will cause intense local environmental hazards, such as high localised HCl concentrations and acid rain.

Hawaii

Spectral masking of goethite in abandoned mine drainage systems: implications for Mars

Remote sensing studies of the surface of Mars use visible- to near-infrared (VNIR) spectroscopy to identify hydrated and hydroxylated minerals, which can be used to constrain past environmental conditions on the surface of Mars. However, due to differences in optical properties, some hydrated phases can mask others in VNIR spectra, complicating environmental interpretations. Here, we examine the role of masking in VNIR spectra of natural precipitates of ferrihydrite, schwertmannite, and goethite from abandoned mine drainage (AMD) systems in southeastern Pennsylvania. Mixtures of ferrihydrite, schwertmannite, and goethite were identified in four AMD sites by using X-ray diffractometry (XRD), and their XRD patterns compared to their VNIR spectra. We find that both ferrihydrite and schwertmannite can mask goethite in VNIR spectra of natural AMD precipitates. These findings suggest that care should be taken in interpreting environments on Mars where ferrihydrite, schwertmannite, or goethite are found, as the former two may be masking the latter. Additionally, our findings suggest that outcrops on Mars with both goethite and ferrihydrite/schwertmannite VNIR signatures may have high relative abundances of goethite, or the goethite may exist in a coarsely crystalline phase.

Pennsylvania

From hydrated silica to quartz: Potential hydrothermal precipitates found in Jezero crater, Mars

On Earth, silica-rich phases from opal to quartz are important indicators and tracers of geological processes. Hydrated silica, such as opal, is a particularly good matrix for the preservation of molecular and macroscopic biosignatures. Cherts, a type of silica-dominated rocks, provide a unique archive of ancient terrestrial life while quartz is the emblematic mineral of the Earth's continental crust. On Mars, hydrated silica has been detected in several locations based on remote sensing and rover-based studies. In the present article we report on the detection of cobbles made of hydrated silica (opal or chalcedony), as well as well-crystallized quartz. These detections were made with the SuperCam instrument onboard Perseverance (Mars 2020 mission), using a combination of LIBS, infrared and Raman spectroscopy. Quartz-dominated stones are detected unambiguously for the first time on the Martian surface, and based on grain size and crystallinity are proposed to be of hydrothermal origin. Although these rocks were all found as float, we propose that these detections are part of a common hydrothermal system, and represent different depths / temperatures of precipitation. This attests that hydrothermal processes were active in and around Jezero crater, possibly triggered by the Jezero crater-forming impact. These silica-rich rocks, in particular opaline silica, are very promising targets for sampling and return to Earth given their high biosignature preservation potential.

Earth and Planetary Science Letters

Landscape-scale variation in canopy water content of giant sequoias during drought

Recent drought (2012–2016) caused unprecedented foliage dieback in giant sequoias ( Sequoiadendron giganteum ), a species endemic to the western slope of the southern Sierra Nevada in central California. As part of an effort to understand and map sequoia response to droughts, we studied the patterns of remotely sensed canopy water content (CWC), both within and among sequoia groves in two successive years during the drought period (2015 and 2016). Our aims were: (1) to quantify giant sequoia responses to severe drought stress at a landscape scale using CWC as an indicator of crown foliage status, and (2) to estimate the effect of environmental correlates that mediate CWC change within and among giant sequoia groves. We utilized airborne high fidelity imaging spectroscopy (HiFIS) and light detection and ranging (LiDAR) data from the Carnegie Airborne Observatory to assess giant sequoia foliage status during 2015 and 2016 of the 2012–2016 droughts. A series of statistical models were generated to classify giant sequoias and to map their location in Sequoia and Kings Canyon National Parks (SEKI) and vicinity. We explored the environmental correlates and the spatial patterns of CWC change at the landscape scale. The mapped CWC was highly variable throughout the landscape during the two observation years, and proved to be most closely related to geological substrates, topography, and site-specific water balance. While there was an overall net gain in sequoia CWC between 2015 and 2016, certain locations (lower elevations, steeper slopes, areas more distant from surface water sources, and areas with greater climate water deficit) showed CWC losses. In addition, we found greater CWC loss in shorter sequoias and those growing in areas with lower sequoia stem densities. Our results suggest that CWC change indicates sequoia response to droughts across landscapes. Long-term monitoring of giant sequoia CWC will likely be useful for modeling and predicting their population-level response to future climate change.

California