SEARCH · USGS Science
Results for “Seismological Research Letteres”
Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Earthquakes and the southeastern boundary of the intact Iapetan margin in eastern North America
Earthquakes at three localities in eastern North America have been attributed on geological and seismological grounds to compressional reactivation of some of the late Proterozoic or early Paleozoic normal faults in the northeast-trending Iapetan passive margin. Assessment of seismic hazard can be aided by identifying the boundaries of the area of Iapetan faulting. A previous paper located the northwestern boundary. This report interprets deep seismic-reflection profiles as showing that the margin comprises a seismically active northwestern part, where Precambrian crust contains some Iapetan faults but remains mostly as it was formed, and a southeastern part, where later deformations likely destroyed or modified the Precambrian crust and Iapetan faults. Accordingly, the boundary between the northwestern and southeastern parts of the margin, which coincides approximately with the Appalachian gravity gradient, can be taken as the southeastern limit of potentially seismogenic Iapetan faults.
Rapid derivation of rupture history for large earthquakes
No abstract available.
SEA96 - A new predictive relation for earthquake ground motions in extensional tectonic regimes
No abstract available.
Some comparisons between recent ground-motion relations
We provide an overview of new ground-motion relations for eastern North America (ENA) developed over the last five years. The empirical-stochastic relations of Atkinson and Boore (1995) are compared to relations developed by the Electric Power Research Institute (EPRI, 1993; also Toro et al. , 1994), Frankel et al. (1996), and the consensus ENA ground-motion values as reported by SSHAC (1996). The main difference between our relations and those of EPRI or Frankel is in the low-frequency amplitudes ( f < 2 Hz, all magnitudes). We predict lower amplitudes (by more than a factor of two) at 1 Hz, largely due to our use of an empirical source model rather than a single-corner-frequency Brune source model; the use of the empirical source model is motivated by the desire to match the ENA ground-motion database as closely as possible. We also compare our new ENA relations to empirical relations for California. The comparison is complicated by the need to adjust the ENA hard-rock motions to obtain equivalent motions for typical California soil conditions. Two alternative methods of making this correction lead to somewhat different conclusions. One possible conclusion is that our ENA relations predict similar low-frequency amplitudes to those predicted by Boore et al. (1993, 1994) and Abrahamson and Silva (1996) for California, but our predicted ENA amplitudes are much higher (factor > 2) than California values at high frequencies. The alternative soil correction leads to the conclusion that our ENA relations are moderately lower (factor<2) than the California relations at low frequencies, and moderately higher at high frequencies. Both of these conclusions imply that ground-motion relations or time series for earthquakes in one region cannot be simply modified for use in engineering analyses in another region.
Structural underpinnings and neotectonics of the southern Illinois Basin: An overview
The southern end of the Illinois Basin is one of the most structurally complex regions in the Midcontinent United States. Two major structural elements characterize this part of the basin: (1) A broad southwestward-plunging cratonic depression extends across central Illinois and southwestern Indiana. Investigations of historical and prehistorical earthquakes in this part of the basin indicate that moderate to high earthquake potential exists; the seismogenic sources, however, remain enigmatic. (2) The southernmost part of the basin is underlain by the Reelfoot Rift and Rough Creek Graben, a rift system that formed during late Precambrian to Middle Cambrian time. Geodynamic processes operating within the rift since the late Precambrian have had a major influence on the tectonic, diagenetic, and depositional history of the region. In addition, tectonic compressive stress appears to be reactivating ancient faults within the Reelfoot Rift, resulting in coherent linear segments of earthquake epicenters called the New Madrid Seismic Zone. Geological and geophysical information suggests that the cause of earthquakes in the New Madrid Seismic Zone is unrelated to that in the region north of the rift system.
Proterozoic structure, Cambrian rifting, and younger faulting as revealed by a regional seismic reflection network in the southern Illinois Basin
Four high-quality seismic reflection profiles through the southern Illinois Basin, totaling 245 km in length, provide an excellent regional subsurface stratigraphic and structural framework for evaluation of seismic risk, hydrocarbon occurrence, and other regional geologic studies. These data provide extensive subsurface information on the geometry of the intersection of the Cambrian Reelfoot and Rough Creek rifts, on extensive Proterozoic reflection sequences, and on structures (including the Fluorspar Area Fault Complex and Hicks Dome) that underlie a transitional area between the well-defined New Madrid seismic zone (to the southwest) and a more diffuse area of seismicity in the southern Illinois Basin. Our principal interpretations from these data are listed here in order of geologic age, from oldest to youngest: Prominent Proterozoic layering, possibly equivalent to Proterozoic (∼1 Ga) Middle Run Formation clastic strata and underlying (1.3–1.5 Ga) volcanic rocks of the East Continent rift basin, has been strongly deformed, probably as part of the Grenville foreland fold and thrust belt. A well-defined angular unconformity is seen in many places between Proterozoic and Cambrian strata; a post-Grenville Proterozoic sequence is also apparent locally, directly beneath the base of the Cambrian. We infer a major reversal in Cambrian rift polarity (accommodation zone) in the Rough Creek Graben in western Kentucky. Seismic facies analysis suggests the presence of basin-floor fan complexes at and near the base of the Cambrian interval and within parts of a Proterozoic post-Grenville sequence in several parts of the Rough Creek Graben. There is an abrupt pinchout of the Mount Simon Sandstone against crystalline basement beneath the Dale Dome (near the Texaco no. 1 Cuppy well, Hamilton County) in southeastern Illinois, and a more gradual Mount Simon pinchout to the southeast. Where crossed by the seismic reflection line in southeast Illinois, some faults in the Wabash Valley Fault System produce discrete offset in Ordovician and younger strata only; one of the Wabash Valley faults cuts the top of the Precambrian on this seismic profile. The data show clear evidence of late Paleozoic reverse faulting along both boundaries of the Rough Creek Graben in western Kentucky, although significant unreactivated Cambrian rift-bounding faults are also preserved. Chaotic reflection patterns in the lower and middle Paleozoic strata near Hicks Dome, southern Illinois, are related to a combination of intrusive brecciation, intense faulting, and alteration of carbonate strata by acidic mineralizing fluids, all of which occurred in the Permian. Late Paleozoic(?) reverse faulting is interpreted on one flank of the Rock Creek Graben, southern Illinois. Permian and Mesozoic(?) extensional faulting is clearly imaged in the Fluorspar Area Fault Complex; neotectonic studies suggest that these structures were reactivated in the Quaternary.
Proterozoic sequences and their implications for Precambrian and Cambrian geologic evolution of western Kentucky: Evidence from seismic-reflection data
Analyses of two seismic-reflection lines in western Kentucky indicate the presence of two Proterozoic, unconformity-bounded sequences. One is autochthonous and of probable Late Proterozoic age; the other is allochthonous and of probable Middle Proterozoic age. Reflector patterns and apparent relationships to similar sequences elsewhere in the region suggest that the two sequences are of continental-rift origin. The two Proterozoic sequences lie beneath and adjacent to rocks of the Cambrian rift sequence in the Rough Creek Graben. The oldest sequence, the pre-Grenville sequence, was apparently folded and thrust faulted by the Grenville compressional event, implying that it is older than ???0.975 Ga (Middle Proterozoic). Two seismic-reflection pattern types are present in the western Kentucky data that may relate to the Middle Run (lithic arenite) and volcanic sequences defined farther east near the Grenville Front. The presence of imbricate, thrust-belt geometries in the pre-Grenville sequence extends the known westward limit of Grenville compressional structures into western Kentucky. The younger, post-Grenville sequence is less deformed and was apparently formed after the Grenville compressional event; several lines of evidence indicate that it is Late Proterozoic (0.7 to 0.6 Ga) in age. This probable siliciclastic and volcanic-rift sequence is represented by only thin remnants in western Kentucky and has no equivalent near the Grenville Front in southwestern Ohio and central Kentucky. Rocks of the better documented Cambrian rifting event belong to the thick, pre-Knox sequence in the Rough Creek Graben of western Kentucky and lie unconformably above these earlier sequences. A previously undocumented, northward-thickening interval within the lower part of the Cambrian pre-Knox sequence is recognized north of the Rough Creek Graben.
Geophysical setting of the Wabash Valley fault system
Interpretation of existing regional magnetic and gravity data and new local high-resolution aeromagnetic data provides new insights on the tectonic history and structural development of the Wabash Valley Fault System in Illinois and Indiana. Enhancement of short-wavelength magnetic anomalies reveal numerous NW- to NNE-trending ultramafic dikes and six intrusive complexes (including those at Hicks Dome and Omaha Dome). Inversion models indicate that the interpreted dikes are narrow (≤3 m), lie at shallow depths (<200 m) and are steeply dipping. Some of the interpreted dikes closely follow mapped faults; their abundance suggests that the Wabash Valley Fault System contains many more faults than those mapped. Both the interpreted dike pattern and mapped Wabash Valley Fault System terminate near the Reelfoot-Rough Creek-Rome rift system. Based on the interpretation of both the regional magnetic and gravity data and the high-resolution magnetic data, we propose that the shallow faults and deep-seated rift structures in the Wabash Valley terminate at or near the Rough Creek-Shawneetown Fault System. The Grayville Graben (∼20 km wide, ∼700 m maximum basement relief, and <40 km long [Bear et al. , this volume]) underlying the Wabash Valley developed during rifting, perhaps in response to stress concentrations generated by a bend in the Reelfoot-Rough Creek-Rome rift system. We therefore hypothesize that although the Reelfoot Rift and Rough Creek Graben represent tectonic intraplate structures of large areal extent (>500 km long and generally >50 km wide) and with deep basins (locally >3 km thick), the ancestral Wabash Valley faults express, in comparison, minor tectonic structures and probably do not represent a failed rift arm. There is a lack of any obvious relation between the Wabash Valley Fault System and the epicenters of historic and prehistoric earthquakes. Five prehistoric earthquakes lie conspicuously near structures associated with the Commerce geophysical lineament, a NE-trending magnetic and gravity lineament lying oblique to the Wabash Valley Fault System and possibly extending over 600 km from NE Arkansas to central Indiana.
Boundary separating the seismically active reelfoot rift from the sparsely seismic Rough Creek graben, Kentucky and Illinois
The Reelfoot rift is the most active of six Iapetan rifts and grabens in central and eastern North America. In contrast, the Rough Creek graben is one of the least active, being seismically indistinguishable from the central craton of North America. Yet the rift and graben adjoin. Hazard assessment in the rift and graben would be aided by identification of a boundary between them. Changes in the strikes of single large faults, the location of a Cambrian transfer zone, and the geographic extent of alkaline igneous rocks provide three independent estimates of the location of a structural boundary between the rift and the graben. The boundary trends north-northwest through the northeastern part of the Fluorspar Area Fault Complex of Kentucky and Illinois, and has no obvious surface expression. The boundary involves the largest faults, which are the most likely to penetrate to hypocentral depths, and the boundary coincides with the geographic change from abundant seismicity in the rift to sparse seismicity in the graben. Because the structural boundary was defined by geologic variables that are expected to be causally associated with seismicity, it may continue to bound the Reelfoot rift seismicity in the future.
Seismic interpretation of the deep structure of the Wabash Valley Fault System
Interpretations of newly available seismic reflection profiles near the center of the Illinois Basin indicate that the Wabash Valley Fault System is rooted in a series of basement-penetrating faults. The fault system is composed predominantly of north-northeast-trending high-angle normal faults. The largest faults in the system bound the 22-km wide 40-km long Grayville Graben. Structure contour maps drawn on the base of the Mount Simon Sandstone (Cambrian System) and a deeper pre-Mount Simon horizon show dip-slip displacements totaling at least 600 meters across the New Harmony fault. In contrast to previous interpretations, the N-S extent of significant fault offsets is restricted to a region north of 38° latitude and south of 38.35° latitude. This suggests that the graben is not a NE extension of the structural complex composed of the Rough Creek Fault System and the Reelfoot Rift as previously interpreted. Structural complexity on the graben floor also decreases to the south. Structural trends north of 38° latitude are offset laterally across several large faults, indicating strike-slip motions of 2 to 4 km. Some of the major faults are interpreted to penetrate to depths of 7 km or more. Correlation of these faults with steep potential field gradients suggests that the fault positions are controlled by major lithologic contacts within the basement and that the faults may extend into the depth range where earthquakes are generated, revealing a potential link between specific faults and recently observed low-level seismicity in the area.
Investigating possible earthquake-related structure beneath the southern Illinois Basin from seismic reflection
The relationship between seismicity and faults observed on seismic reflection profiles from the New Madrid Seismic Zone (NMSZ) in the central Mississippi Valley has been intensively studied for the past 15 years. However, comparable studies relating reflector sequences and earthquakes in the southern Illinois Basin, located northeast of the NMSZ, have not been undertaken. This study investigates the possible relationship between the source parameters of the November 9, 1968, magnitude ( m bLg ) 5.5 earthquake (a NNE-trending, previously interpreted west-dipping reverse fault at 21.2 ± 5.4 km depth) in southern Illinois, and a zone of moderately dipping reflectors in crystalline (?) basement observed on a nearby high-quality seismic reflection profile. The 1968 event was the twentieth century's largest magnitude earthquake in the southern Illinois region. The zone of dipping basement reflectors is part of a broad prominent sequence, in which reflectors are subhorizontal or inclined with a strong west-dipping component, that appears beneath the Wabash Valley Fault System and extends to the west beneath the Illinois Basin where it steepens and plunges deeper into the crust over the 1968 hypocenter. More than one interpretation of the dipping reflector zone is admissible, including intrusion of igneous sills or thrust faults or both within a localized shear zone. The dipping reflector zone cannot be traced from the basement into the overlying Phanerozoic sedimentary section or associated directly with any particular previously mapped fault. If a tectonic interpretation is correct, the correlation between the 1968 reverse fault event and the reflector zone may mean that such quakes are nucleating along a blind compressional structure in the crystalline basement of southern Illinois, possibly analogous to the recent destructive southern California earthquakes.
Seismic evidence of Quaternary faulting in the Benton Hills area, southeast Missouri
Two reflection seismic profiles at English Hill, across the southern edge of the Benton Hills escarpment, southeast Missouri, establish that geologic structures at English Hill are of tectonic origin. The lowland area to the south of the escarpment is relatively undisturbed. The geology at English Hill is structurally complex, and reflection seismic and geologic data indicate extensive and episodic faulting of Paleozoic, Cretaceous, Tertiary, and Quaternary strata. The individual faults have near-vertical fault surfaces with maximum vertical separations on the order of 15 m. They appear to be clustered in north-northeast trending zones that essentially parallel one of the dominant Benton Hills structural trends. These observations suggest that previously mapped Quaternary faults at English Hill are deep-seated and tectonic in origin. This paper documents recent faulting at English Hill and is the first time late Quaternary, surface-rupture faulting has been recognized in the middle Mississippi River Valley region outside of the New Madrid seismic zone. This has important implications for earthquake assessment in the midcontinent.
Geomorphic response to tectonically-induced ground deformation in the Wabash Valley
Numerous low- to moderate-intensity earthquakes have been recorded in a zone of diffuse modern seismicity in southwest Indiana, southeast Illinois, and northernmost Kentucky. Structural elements within the zone include the Wabash Valley Fault System, the LaSalle Anticlinal Belt in western Illinois, and the Rough Creek-Shawneetown Fault System in northern Kentucky. The presence of seismically-induced liquefaction features in the near-surface alluvial sediments in the region indicates that strong ground motion has occurred in the recent geological past, but because the glacial and alluvial sediments in the Wabash Valley appear to be otherwise undisturbed, post-Paleozoic ground deformation resulting from movement on these structural elements has not yet been documented. Morphometric analysis of the land surface, detailed mapping of geomorphic elements in the valley, reconnaissance drilling of the Holocene and Pleistocene alluvium, and structural analysis of the bedrock underlying the valley were used to determine whether the geomorphology of the valley and the patterns of alluviation of the Wabash River were affected by surface deformation associated with the seismic zone during the late Pleistocene and Holocene. Among the observed features in the valley that can be attributed to deformation are: (1) tilting of the modern land surface to the west, (2) preferred channel migration toward the west side of the valley, with concomitant impact on patterns of soil development and sedimentation rate, (3) a convex longitudinal profile of the Wabash River where it crosses the LaSalle Anticlinal Belt, and (4) increased incision of the river into its floodplain downstream from the anticlinal belt.
Spatial earthquake hazard assessment of Evansville, Indiana
The earthquake hazard has been evaluated for a 150-square-kilometer area around Evansville, Indiana. GIS-QUAKE, a system that combines liquefaction and ground motion analysis routines with site-specific geological, geotechnical, and seismological information, was used for the analysis. The hazard potential was determined by using 586 SPT borings, 27 CPT sounding, 39 shear-wave velocity profiles and synthesized acceleration records for body-wave magnitude 6.5 and 7.3 mid-continental earthquakes, occurring at distances of 50 km and 250 km, respectively. The results of the GIS-QUAKE hazard analyses for Evansville identify areas with a high hazard potential that had not previously been identified in earthquake zonation studies. The Pigeon Creek area specifically is identified as having significant potential for liquefaction-induced damage. Damage as a result of ground motion amplification is determined to be a moderate concern throughout the area. Differences in the findings of this zonation study and previous work are attributed to the size and range of the database, the hazard evaluation methodologies, and the geostatistical interpolation techniques used to estimate the hazard potential. Further, assumptions regarding the groundwater elevations made in previous studies are also considered to have had a significant effect on the results.
Faulting parameters of the January 16, 1994 Wyomissing Hills, Pennsylvania earthquakes
Two events dominated the January 1994, Wyomissing, PA earthquake sequence, an M w 4.0 foreshock, followed by an M w 4.6 mainshock. We modeled regional waveforms to estimate the event depth and the moment tensors for the two largest events in the sequence, and examine teleseismic waveforms recorded on the ARCESS short-period seismic array to estimate the depth and source time function of the mainshock. Our data constrain the depth of the events to be shallower than 5 km, and prefer a depth of 3–5 km. For an assumed depth of 3 km, the mainshock moment tensor is 75% double couple, with (the major double couple) planes striking at 135°N, 347°N, dips of 49°, 46°, and rakes of 68°, 114°. The estimated moment is 8.9 × 10 22 dyne-cm. The P axis strikes 241°N and plunges 2°, the Tension axis strikes 336°N and plunges 73°. The foreshock inversion results are virtually identical to the mainshock results; for a source depth of three km, we find a major double couple with a strike, dip, and rake of 121°N, 60°, and 66°, respectively. The seismic moment for the foreshock is 1.2 × 10 22 dyne-cm, which is approximately 13% of the mainshock moment release. These events did not excite high-frequency Lg waves as effectively as typical eastern North American events, and the mainshock had a stress drop in the range of 25–50 bars.