SEARCH · USGS Science

Results for “Journal of Structural Geology”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 325 records · Page 18Linked to original sources

USGS2018

Insights into the emplacement of upper-crustal plutons and their relationship to large silicic calderas, from field relationships, geochronology, and zircon trace element geochemistry in the Stillwater – Clan Alpine caldera complex, western Nevada, USA

Geologic mapping, new U-Pb zircon ages, and new and published 40 Ar/ 39 Ar sanidine ages document the timing and extent of Oligocene magmatism in the southern Stillwater Range and Clan Alpine Mountains of western Nevada, where Miocene extension has exposed at least six nested silicic calderas and underlying granitic plutons to crustal depths locally ≥ 9 km. Both caldera-forming rhyolitic tuffs and underlying plutons were emplaced in two episodes, one from about 30.4–28.2 Ma that included the Deep Canyon, Job Canyon, and Campbell Creek calderas and underlying plutons, and one from about 25.3–24.8 Ma that included the Louderback Mountains, Poco Canyon, and Elevenmile Canyon calderas and underlying plutons. In these two 1–2 m.y. periods, almost the entire Mesozoic upper crust was replaced by Oligocene intrusive and extrusive rocks to depths ≥ 9 km over an estimated total area of ~ 1500 km 2 (pre-extension). Zircon trace element geochemistry indicates that some plutonic rock can be solidified residual magma from the tuff eruptions. Most plutons are not solidified residual magma, although they directly underlie calderas and were emplaced along the same structures shortly after to as much as one million years after caldera formation. Magma chambers and plutons grew by floor subsidence accommodated by downward transfer of country rocks. If other Great Basin calderas are similar, the dense concentration of shallowly exposed calderas in central Nevada is underlain by a complexly zoned mid-Cenozoic batholith assembled in discrete pulses that coincided with formation of large silicic calderas up to 2500–5000 km 3 .

Nevada↗

USGS2012

Crustal structure and composition of the southern Foothills Metamorphic Belt, Sierra Nevada, California, from seismic data

The Foothills Metamorphic Belt is an accreted terrane consisting of Paleozoic and Mesozoic metamorphic rocks that separates the Great Valley from the Sierra Nevada batholith in northern and central California. Until recently, the only available geophysical data for this area were reconnaissance refraction surveys, and gravity and magnetic data. New insights into the structure of the deep crust are provided by the interpretation of a seismic reflection profile (CC‐2), acquired in 1984 by the U.S. Geological Survey at the southern end of the Foothills Metamorphic Belt. Our interpretation is constrained by a new seismic velocity model derived from coincident microearthquake data. Earthquake hypocenters that occur at unusually great depths of 12 to 30 km make the data set particularly useful for obtaining deep crustal velocity information. The velocity model shows velocities of 5.2 to 6.3 km s −1 for the upper 12 km of the crust, and 6.7 to 6.8 km s −1 from 12 km to an estimated Moho at 32 km. The upper crustal velocities correspond to metamorphic rocks and serpentinites of the Foothills Metamorphic Belt as well as to diorites and granodiorites of the Sierra Nevada batholith, while the lower crustal velocities are interpreted to represent intermediate to mafic granulites. The majority of the earthquake hypocenters as well as a 6.7 km s −1 layer in the velocity model corresponds in depth to thick zones of west dipping midcrustal reflections that may represent major shear zones formed during the late Jurassic Nevadan orogeny or synbatholithic ductile shear zones that accommodated crustal extension associated with batholith intrusion. These reflections are truncated updip by an inferred subvertical contact that coincides with the western edge of the Sierra Nevada batholith and the southward trace of the Bear Mountains fault zone. The updip truncation of midcrustal shear zones and high lower crustal velocities indicate that strike‐slip faulting and magmatic underplating can be important processes during the docking and welding of an accreted terrane.

California↗

USGS2015

Plant phenolics and absorption features in vegetation reflectance spectra near 1.66 μm

Past laboratory and field studies have quantified phenolic substances in vegetative matter from reflectance measurements for understanding plant response to herbivores and insect predation. Past remote sensing studies on phenolics have evaluated crop quality and vegetation patterns caused by bedrock geology and associated variations in soil geochemistry. We examined spectra of pure phenolic compounds, common plant biochemical constituents, dry leaves, fresh leaves, and plant canopies for direct evidence of absorption features attributable to plant phenolics. Using spectral feature analysis with continuum removal, we observed that a narrow feature at 1.66 μm is persistent in spectra of manzanita, sumac, red maple, sugar maple, tea, and other species. This feature was consistent with absorption caused by aromatic C- H bonds in the chemical structure of phenolic compounds and non-hydroxylated aromatics. Because of overlapping absorption by water, the feature was weaker in fresh leaf and canopy spectra compared to dry leaf measurements. Simple linear regressions of feature depth and feature area with polyphenol concentration in tea resulted in high correlations and low errors (% phenol by dry weight) at the dry leaf ( r 2 = 0.95, RMSE = 1.0%, n = 56), fresh leaf ( r 2 = 0.79, RMSE = 2.1%, n = 56), and canopy ( r 2 = 0.78, RMSE = 1.0%, n = 13) levels of measurement. Spectra of leaves, needles, and canopies of big sagebrush and evergreens exhibited a weak absorption feature centered near 1.63 μm, short ward of the phenolic compounds, possibly consistent with terpenes. This study demonstrates that subtle variation in vegetation spectra in the shortwave infrared can directly indicate biochemical constituents and be used to quantify them. Phenolics are of lesser abundance compared to the major plant constituents but, nonetheless, have important plant functions and ecological significance. Additional research is needed to advance our understanding of the spectral influences of plant phenolics and terpenes relative to dominant leaf biochemistry (water, chlorophyll, protein/nitrogen, cellulose, and lignin).

International Journal of Applied Earth Observation↗

USGS2008

Monitoring in the context of structured decision-making and adaptive management

In a natural resource management setting, monitoring is a crucial component of an informed process for making decisions, and monitoring design should be driven by the decision context and associated uncertainties. Monitoring itself can play >3 roles. First, it is important for state-dependent decision-making, as when managers need to know the system state before deciding on the appropriate course of action during the ensuing management cycle. Second, monitoring is critical for evaluating the effectiveness of management actions relative to objectives. Third, in an adaptive management setting, monitoring provides the feedback loop for learning about the system; learning is sought not for its own sake but primarily to better achieve management objectives. In this case, monitoring should be designed to reduce the critical uncertainties in models of the managed system. The United States Geological Survey and United States Fish and Wildlife Service are conducting a large-scale management experiment on 23 National Wildlife Refuges across the Northeast and Midwest Regions. The primary management objective is to provide habitat for migratory waterbirds, particularly during migration, using water-level manipulations in managed wetlands. Key uncertainties are related to the potential trade-offs created by management for a specific waterbird guild (e.g., migratory shorebirds) and the response of waterbirds, plant communities, and invertebrates to specific experimental hydroperiods. We reviewed the monitoring program associated with this study, and the ways that specific observations fill >1 of the roles identified above. We used observations from our monitoring to improve state-dependent decisions to control undesired plants, to evaluate management performance relative to shallow-water habitat objectives, and to evaluate potential trade-offs between waterfowl and shorebird habitat management. With limited staff and budgets, management agencies need efficient monitoring programs that are used for decision-making, not comprehensive studies that elucidate all manner of ecological relationships.

Journal of Wildlife Management↗

USGS2011

Chemical structures of coal lithotypes before and after CO2 adsorption as investigated by advanced solid-state 13C nuclear magnetic resonance spectroscopy

Four lithotypes (vitrain, bright clarain, clarain, and fusain) of a high volatile bituminous Springfield Coal from the Illinois Basin were characterized using advanced solid-state 13 C nuclear magnetic resonance (NMR) spectroscopy. The NMR techniques included quantitative direct polarization/magic angle spinning (DP/MAS), cross polarization/total sideband suppression (CP/TOSS), dipolar dephasing, CH n selection, and recoupled C–H long-range dipolar dephasing techniques. The lithotypes that experienced high-pressure CO 2 adsorption isotherm analysis were also analyzed to determine possible changes in coal structure as a result of CO 2 saturation at high pressure and subsequent evacuation. The main carbon functionalities present in original vitrain, bright clarain, clarain and fusain were aromatic carbons (65.9%–86.1%), nonpolar alkyl groups (9.0%–28.9%), and aromatic C–O carbons (4.1%–9.5%). Among these lithotypes, aromaticity increased in the order of clarain, bright clarain, vitrain, and fusain, whereas the fraction of alkyl carbons decreased in the same order. Fusain was distinct from other three lithotypes in respect to its highest aromatic composition (86.1%) and remarkably small fraction of alkyl carbons (11.0%). The aromatic cluster size in fusain was larger than that in bright clarain. The lithotypes studied responded differently to high pressure CO 2 saturation. After exposure to high pressure CO 2 , vitrain and fusain showed a decrease in aromaticity but an increase in the fraction of alkyl carbons, whereas bright clarain and clarain displayed an increase in aromaticity but a decrease in the fraction of alkyl carbons. Aromatic fused-rings were larger for bright clarain but smaller for fusain in the post-CO 2 adsorption samples compared to the original lithotypes. These observations suggested chemical CO 2 –coal interactions at high pressure and the selectivity of lithotypes in response to CO 2 adsorption.

International Journal of Coal Geology↗

USGS2005

Historical shoreline changes along the US Gulf of Mexico: A summary of recent shoreline comparisons and analyses

The US Geological Survey is systematically analyzing historical shoreline changes along open-ocean sandy shores of the United States. This National Assessment of Shoreline Change Project is developing standard repeatable methods for mapping and analyzing shoreline movement so that internally consistent updates can periodically be made to record coastal erosion and land loss along US shores. Recently, shoreline change maps and a report were published for states bordering the Gulf of Mexico. Long-term and short-term average rates of change were calculated by comparing three historical shorelines (1800s, 1930s, 1970s) with an operational mean high water shoreline derived from lidar (light detection and ranging) surveys (post-1998). The rates of change, statistical uncertainties, original shorelines, and complementary geographic information system layers, such as areas of beach nourishment, are available on an Internet Map Server (IMS). For the Gulf of Mexico region, rates of erosion are generally highest in Louisiana along barrier island and headland shores associated with the Mississippi delta. Erosion also is rapid along some barrier islands and headlands in Texas, whereas barrier islands in Mississippi are migrating laterally. Highest rates of erosion in Florida are generally localized around tidal inlets. The most stable Gulf beaches generally are along the west coast of Florida, where low wave energy and frequent beach nourishment minimize erosion. Some long beach segments in Texas have accreted as a result of net longshore drift convergence and around tidal inlets that have been stabilized by long jetties. Individuals and some communities have attempted to mitigate the effects of erosion by emplacement of coastal structures, but those efforts largely have been abandoned in favor of periodic beach nourishment.

Journal of Coastal Research↗

USGS2010

Organic petrology of subbituminous carbonaceous shale samples from Chalāw, Kabul Province, Afghanistan: Considerations for paleoenvironment and energy resource potential

Neogene (?) subbituminous carbonaceous shale deposits from Chalāw, Afghanistan, were investigated through organic petrology techniques and standard coal analyses to determine paleoenvironment and potential for resource utilization. The Chalāw deposit, approximately 30 km southeast of Kabul, currently is exploited for brick making and domestic heating and cooking. Three multiple-bench channel samples of the mined bed at Chalāw were collected and evaluated. The presence of significant huminite (ranging from 0.2 to 59.0 vol.%, mineral-inclusive basis) is suggestive of a terrestrial lignin-rich precursor plant material. Measured reflectance values of 0.38–0.55% indicate subbituminous rank. This rank suggests burial depths of approximately 1500 m and maximum temperatures of approximately 50 °C. Structured liptinite macerals generally are absent except for some fluorescing morphologies interpreted to be poorly-preserved root cork suberinite. Sponge spicule bioliths including gemmoscleres and megascleres are common. These petrographic observations, in addition to high mineral matter content (33 to > 95 vol.%), medium to high sulfur content (2.1–11.5 wt.%, dry basis; db), and the presence of common gastropod? shell fragments and an aragonite-needle chalk bed are consistent with, but not directly indicative of, a marginal marine or estuarine mangrove depositional environment. However, additional data are necessary to confirm this hypothesis and deposition in a freshwater environment cannot be ruled out at this time. Commercial-scale development and utilization of the Chalāw deposit as a thermal fuel resource may be possible using a fluidized bed combustion system which could accept the low-quality mine product currently produced. Samples examined herein contain high-ash yield (45–90 wt.%, db), high total moisture content (17–39 wt.%), low calorific value (980–6860 Btu/lb, m,mmf), and have poor agglomerating properties (FSI = 0), consistent with fuels utilized in fluidized bed combustors. However, delineation of the extent of the deposit through field investigation will be necessary to make a quantified resource estimate for mine planning.

Kabul Province↗

USGS2012

Fire in Mediterranean climate ecosystems-A comparative overview

Four regions of the world share a similar climate and structurally similar plant communities with the Mediterranean Basin. These five areas, known collectively as "mediterranean-type climate (MTC) regions", are dominated by evergreen sclerophyllous-leaved shrublands, semi-deciduous scrub, and woodlands, all of which are prone to widespread crown fires. Summer droughts produce an annual fire hazard that contributes to a highly predictable fire regime. Fire has been an important factor driving the convergence of these systems and is reflected in plant traits such as lignotubers in resprouting shrubs and delayed reproduction that restricts recruitment to a postfire pulse of seedlings. On fertile soils where postfire resprouting is very rapid, opportunities for postfire seedling recruitment are limited and thus these woody taxa have not opted for delaying reproduction. Such fire-independent recruitment is widespread in the floras of MTC regions of the Mediterranean Basin and California and postfire seeding tends to dominate at the more arid end of the gradient. Due to very different geological histories in South Africa and Western Australia, substrates are nutrient poor and thus postfire resprouters do not pose a similar competitive challenge to seedlings and thus postfire seeding is very widespread in these floras. Although circumstantial evidence suggests that the MTC region of Chile had fire-prone landscapes in the Tertiary, these were lost with the late Miocene completion of the Andean uplift, which now blocks summer lightning storms from moving into the region. Today these five regions pose a significant fire management challenge due to the annual fire hazard and metropolitan centers juxtaposed with highly flammable vegetation. This challenge varies across the five MTC landscapes as a function of differences in regional fuel loads and population density.

Israel Journal of Ecology and Evolution↗

USGS2012

The growth of geological structures by repeated earthquakes: 2, Field examples of continental dip-slip faults

A strong test of our understanding of the earthquake cycle is the ability to reproduce extant fault-bounded geological structures, such as basins and ranges, which are built by repeated cycles of deformation. Along strike-slip faults, the coseismic and interseismic deformation can be nearly equal in magnitude and opposite in sign, resulting in little permanent deformation except for the fault offset. For dip-slip faults, portions of the crust are lifted and dropped, and so buoyancy forces are exerted. The seismic and interseismic deformations do not balance, and structures grow and become subject to erosion and deposition. We consider three examples for which the structure and fault geometry are well known: the White Wolf reverse fault in California, site of the 1952 Kern County M=7.3 earthquake, the Lost River normal fault in Idaho, site of the 1983 Borah Peak M=7.0 earthquake, and the Cricket Mountain normal fault in Utah, site of Quaternary slip events. Basin stratigraphy and seismic reflection records are used to profile the structure, and coseismic deformation measured by leveling surveys is used to estimate the fault geometry. To reproduce these structures, we add the deformation associated with the earthquake cycle (the coseismic slip and postseismic relaxation) to the flexure caused by the observed sediment load, treating the crust as a thin elastic plate overlying a fluid substrate. The cumulative deformation is principally dependent on the elastic plate thickness, modestly sensitive to the sediment-substrate density difference, and insensitive to the fluid viscosity for the 4- to 8-Ma structures. We deduce a longterm flexural rigidity of 2–15 × 10 19 Nm; this is equivalent to an elastic plate thickness of 2–4 km for a Young's modulus of 2.5 × 10 10 Nm −2 . This value is found where independent estimates of the elastic thickness from the coherence between surface topography and gravity yield values of about 4 km, but where coseismic fault slip extends to a depth of 10–15 km. Thus much of the seismogenic crust must weaken substantially during the life of active faults, causing the fault-bounded basins to narrow over time.

Journal of Geophysical Research Solid Earth↗

USGS2012

Crustal structure of the Chugach Mountains, southern Alaska: A study of peg‐leg multiples from a low‐velocity zone

A seismic refraction profile recorded along the geologic strike of the Chugach Mountains in southern Alaska shows three upper crustal high‐velocity layers (6.9, 7.2, and 7.6 km/s) and a unique pattern of strongly focussed echelon arrivals to a distance of 225 km. The group velocity of the ensemble of echelon arrivals is 6.4 km/s. Modeling of this profile with the reflectivity method reveals that the echelon pattern is due to peg‐leg multiples generated from within a low‐velocity zone between the second and third upper crustal high‐velocity layers. The third high‐velocity layer (7.6 km/s) is underlain at 18 km depth by a pronounced low‐velocity zone that produces a seismic shadow zone wherein peg‐leg multiples are seen as echelon arrivals. The interpretation of these echelon arrivals as multiples supersedes an earlier interpretation which attributed them to successive primary reflections arising from alternating high‐ and low‐velocity layers. Synthetic seismogram modeling indicates that a low‐velocity zone with transitional upper and lower boundaries generates peg‐leg multiples as effectively as one with sharp boundaries. No PmP or Pn arrivals from the subducting oceanic Moho at 30 km depth beneath the western part of the line are observed on the long‐offset (90–225 km) data. This may be due to a lower crustal waveguide whose top is the high‐velocity (7.6 km/s) layer and whose base is the Moho. A deep (∼54 km) reflector is not affected by the waveguide and has been identified in the data. Although peg‐leg multiples have been interpreted on some long‐range refraction profiles that sound to upper mantle depths, the Chugach Mountains profile is one of the few crustal refraction profiles where peg‐leg multiples are clearly observed. This study indicates that multiple and converted phases may be more important in seismic refraction/wide‐angle reflection profiles than previously recognized.

Alaska↗

USGS2015

What lies beneath: geophysical mapping of a concealed Precambrian intrusive complex along the Iowa–Minnesota border

Large-amplitude gravity and magnetic highs over northeast Iowa are interpreted to reflect a buried intrusive complex composed of mafic–ultramafic rocks, the northeast Iowa intrusive complex (NEIIC), intruding Yavapai province (1.8–1.72 Ga) rocks. The age of the complex is unproven, although it has been considered to be Keweenawan (∼1.1 Ga). Because only four boreholes reach the complex, which is covered by 200–700 m of Paleozoic sedimentary rocks, geophysical methods are critical to developing a better understanding of the nature and mineral resource potential of the NEIIC. Lithologic and cross-cutting relations interpreted from high-resolution aeromagnetic and airborne gravity gradient data are presented in the form of a preliminary geologic map of the basement Precambrian rocks. Numerous magnetic anomalies are coincident with airborne gravity gradient (AGG) highs, indicating widespread strongly magnetized and dense rocks of likely mafic–ultramafic composition. A Yavapai-age metagabbro unit is interpreted to be part of a layered intrusion with subvertical dip. Another presumed Yavapai unit has low density and weak magnetization, observations consistent with felsic plutons. Northeast-trending, linear magnetic lows are interpreted to reflect reversely magnetized diabase dikes and have properties consistent with Keweenawan rocks. The interpreted dikes are cut in places by normally magnetized mafic–ultramafic rocks, suggesting that the latter represent younger Keweenawan rocks. Distinctive horseshoe-shaped magnetic and AGG highs correspond with a known gabbro, and surround rocks with weaker magnetization and lower density. Here, informally called the Decorah complex, the source body has notable geophysical similarities to Keweenawan alkaline ring complexes, such as the Coldwell and Killala Lake complexes, and Mesoproterozoic anorogenic complexes, such as the Kiglapait, Hettasch, and Voisey’s Bay intrusions in Labrador. Results presented here suggest that much of the NEIIC is composed of such complexes, and broadly speaking, may be a discontinuous group of several intrusive bodies. Most units are cut by suspected northwest-trending faults imaged as magnetic lineaments, and one produces apparent sinistral fault separation of a dike in the eastern part of the survey area. The location, trend, and apparent sinistral sense of motion are consistent with the suspected faults being part of the Belle Plaine fault zone, a complex transform fault zone within the Midcontinent rift system that is here proposed to correspond with a major structural discontinuity.

Iowa, Minnesota↗

USGS1978

A tuya in Togiak Valley, Southwest Alaska

The shape, composition, structure, and location of a conspicuous flat-topped mountain in the lower Togiak Valley, southwest Alaska, all indicate that it formed by a subglacial volcanic eruption of olivine basalt. Volcanoes of this type are known as "tuyas." The Togiak tuya erupted into an intraglacial lake in a hole thawed through a glacier that occupied Togiak Valley in Pleistocene time. The eruption was localized along the Togiak fault, which defines the east side of a shallow graben that is floored by older olivine basalt flows. The tuya, which has an area of 15 square kilometers, is a parallelogram. The flat summit, about 300 meters above the valley floor, is capped by glassy, fine-grained subaerial flows of alkali olivine basalt. To the north, the capping flows overlie palagonitized glassy tuffs; to the south, they overlie pillow basalts and breccia. The elevation of the pillow basalts indicates that surface of the melt-water lake was at least 250 m above present-day sea level. Basalt xenoliths in the tuffs and comparison with other better exposed tuyas suggest that the tuffs probably overlie an older pile of subaqueous pillow basalts that erupted beneath the intraglacial lake. The tuya overlies and is much younger than the preglacial flows on valley floor that yielded a potassium-argon age of 0.758±0.2 million years.

Alaska↗

USGS2024

Structure and morphology of chars and activated carbons obtained from thermal treatment of coal and biomass origin materials, including their wastes: Results from the ICCP Microscopy of Carbon Materials Working Group

This paper describes the evaluation of petrographic textures in char and activated carbon derived from coal, coal by-products and biomass, formed during carbonization and activation processes. This work represents the results of interlaboratory exercises from 2016 to 2022 of the Microscopy of Carbon Materials Working Group in Commission III of the International Committee for Coal and Organic Petrology. The interlaboratory exercises were run on photomicrograph samples. For textural characterization of carbon materials, the existing American Society for Testing and Materials (ASTM) classification system for metallurgical coke was applied. Morphological differences were evaluated in 29 carbon material types, including 22 char samples, and 7 activated carbon (AC) samples obtained experimentally using conventional direct/indirect and microwave heating technologies. This approach gives an extended view on the identification of microporous carbons, and how a certain heat treatment develops a certain optical texture and structure in a raw material. The requested evaluation of carbon materials was related to their porosity, origin, extent, and characteristics, which are particular to each carbon material type. Because carbon matrices can form a wide range of optical textures during heat treatment it is important to demonstrate which carbon occurrences will have a crucial role in industrial applications dominated by adsorption phenomena. The interlaboratory exercises included 17 participants from 14 laboratories. Four sets of digital black and white and colour photomicrographs were distributed, which in total comprised 184 fields of different types of carbon material. The results were evaluated based on four levels: (i) optical texture (isotropic/anisotropic), (ii) optical type and size (punctiform, mosaic, fiber, ribbon, domain), iii) morphology (porous, non-porous/massive), and (iv) particle origin (precursor type). The statistical method applied to evaluate the results was based on “raw agreement indices”. Comparative analyses of the average values of the level of overall agreement showed homogeneity in the results, the mean value was 89%, with a minimum value of 87% and a maximum value of 91% for those who participated in at least three out of four exercises.

International Journal of Coal Geology↗

USGS2006

Multiple edifice-collapse events in the Eastern Mexican Volcanic Belt: The role of sloping substrate and implications for hazard assessment

The Citlalte??petl-Cofre de Perote volcanic chain forms an important physiographic barrier that separates the Central Altiplano (2500??masl) from the Gulf Coastal Plain (GCP) (1300??masl). The abrupt eastward drop in relief between these provinces gives rise to unstable conditions and consequent gravitational collapse of large volcanic edifices built at the edge of the Altiplano. Eastward sloping substrate, caused by the irregular configuration of the basement rocks, is the dominant factor that controls the direction of collapsing sectors in all major volcanoes in the region to be preferentially towards the GCP. These collapses produced voluminous debris avalanches and lahars that inundated the well-developed drainages and clastic aprons that characterize the Coastal Plain. Large catastrophic collapses from Citlalte??petl, Las Cumbres, and Cofre de Perote volcanoes are well documented in the geologic record. Some of the avalanches and transformed flows have exceptionally long runouts and reach the Gulf of Mexico traveling more than 120??km from their source. So far, no direct evidence has been found for magmatic activity associated with the initiation of these catastrophic flank-collapses. Apparently, instability of the volcanic edifices has been strongly favored by very intense hydrothermal alteration, abrupt topographic change, and intense fracturing. In addition to the eastward slope of the substrate, the reactivation of pre-volcanic basement structures during the Late Tertiary, and the E-W to ENE-SSW oriented regional stress regimes may have played an important role in the preferential movement direction of the avalanches and flows. In addition to magmatic-hydrothermal processes, high amounts of rainfall in the area is another factor that enhances alteration and eventually weakens the rocks. It is very likely that seismic activity may be the principal triggering mechanism that caused the flank collapse of large volcanic edifices in the Eastern Mexican Volcanic Belt. However, critical pore water pressure from extraordinary amounts of rainfall associated with hurricanes or other meteorological perturbation cannot be ruled out, particularly for smaller volume collapses. There are examples in the area of small seismogenic debris flows that have occurred in historical times, showing that these processes are not uncommon. Assessing the stability conditions of major volcanic edifices that have experienced catastrophic sector collapses is crucial for forecasting future events. This is particularly true for the Eastern Mexican Volcanic Belt, where in many cases no magmatic activity was associated with the collapse. Therefore, edifice failure could occur again without any precursory warning. ?? 2006 Elsevier B.V. All rights reserved.

Journal of Volcanology and Geothermal Research↗

USGS2010

Stratigraphy and Mesozoic–Cenozoic tectonic history of northern Sierra Los Ajos and adjacent areas, Sonora, Mexico

Geologic mapping in the northern Sierra Los Ajos reveals new stratigraphic and structural data relevant to deciphering the Mesozoic–Cenozoic tectonic evolution of the range. The northern Sierra Los Ajos is cored by Proterozoic, Cambrian, Devonian, Mississippian, and Pennsylvanian strata, equivalent respectively to the Pinal Schist, Bolsa Quartzite and Abrigo Limestone, Martin Formation, Escabrosa Limestone, and Horquilla Limestone. The Proterozoic–Paleozoic sequence is mantled by Upper Cretaceous rocks partly equivalent to the Fort Crittenden and Salero Formations in Arizona, and the Cabullona Group in Sonora, Mexico. Absence of the Upper Jurassic–Lower Cretaceous Bisbee Group below the Upper Cretaceous rocks and above the Proterozoic–Paleozoic rocks indicates that the Sierra Los Ajos was part of the Cananea high, a topographic highland during the Late Jurassic and Early Cretaceous. Deposition of Upper Cretaceous rocks directly on Paleozoic and Proterozoic rocks indicates that the Sierra Los Ajos area had subsided as part of the Laramide Cabullona basin during Late Cretaceous time. Basal beds of the Upper Cretaceous sequence are clast-supported conglomerate composed locally of basement (Paleozoic) clasts. The conglomerate represents erosion of Paleozoic basement in the Sierra Los Ajos area coincident with development of the Cabullona basin. The present-day Sierra Los Ajos reaches elevations of greater than 2600 m, and was uplifted during Tertiary basin-and-range extension. Upper Cretaceous rocks are exposed at higher elevations in the northern Sierra Los Ajos and represent an uplifted part of the inverted Cabullona basin. Tertiary uplift of the Sierra Los Ajos was largely accommodated by vertical movement along the north-to-northwest-striking Sierra Los Ajos fault zone flanking the west side of the range. This fault zone structurally controls the configuration of the headwaters of the San Pedro River basin, an important bi-national water resource in the US-Mexico border region.

Sierra Los Ajos↗

USGS2023

Characterization of a complex sand-rich gas hydrate reservoir system in the Indian marine continental margin with downhole log and seismic data

Logging-while-drilling (LWD) and coring data were acquired in Areas A, B, C and E during the National Gas Hydrate Program Expedition 02 (NGHP-02). At Sites NGHP-02-16, −17, −20, −23 and −24 of Area B in the Indian Krishna-Godavari Basin, the gas hydrate-bearing sand-rich reservoirs directly in contact with an underlying water-saturated sediment were revealed near the seismic-inferred bottom simulating reflector (BSR) along a large anticlinal structure. Lithofacies analysis of cores show that the lower gas hydrate-bearing reservoir section at these sites is an interbedded unit with thin fine-sand layers alternating with clay-rich layers. We reanalyzed the LWD data including resistivity, compressional-wave and shear-wave acoustic velocities to assess and compare the spatial variation of sand-hosted gas hydrate and possible related free-gas accumulations. The presence of free gas-bearing sediments in direct contact with gas hydrate-bearing sediments was confirmed at Sites NGHP-02-20 and −24 along the northeastern flank of the anticline. The sand-rich reservoirs associated with the Area B anticlinal feature reveal different pore-filling constituents and variable boundary conditions, including gas hydrate/water contacts and gas hydrate/free gas contacts. We infer that the sedimentary depositional history at Sites NGHP-02-20 and −24, may have resulted in an upward shift of the base of gas hydrate stability zone, that could have led to in situ gas hydrate dissociation and the accumulation of free gas and coexistence interval below the log-inferred gas hydrate-bearing reservoir sections. This study demonstrates that reservoir heterogeneity and fluid migration were major factors affecting the distribution of gas hydrate and free gas in the identified sand-rich reservoirs.

Journal of Marine and Petroleum Geology↗

USGS2016

Evaluation of gas production potential from gas hydrate deposits in National Petroleum Reserve Alaska using numerical simulations

An evaluation of the gas production potential of Sunlight Peak gas hydrate accumulation in the eastern portion of the National Petroleum Reserve Alaska (NPRA) of Alaska North Slope (ANS) is conducted using numerical simulations, as part of the U.S. Geological Survey (USGS) gas hydrate Life Cycle Assessment program. A field scale reservoir model for Sunlight Peak is developed using Advanced Processes & Thermal Reservoir Simulator (STARS) that approximates the production design and response of this gas hydrate field. The reservoir characterization is based on available structural maps and the seismic-derived hydrate saturation map of the study region. A 3D reservoir model, with heterogeneous distribution of the reservoir properties (such as porosity, permeability and vertical hydrate saturation), is developed by correlating the data from the Mount Elbert well logs. Production simulations showed that the Sunlight Peak prospect has the potential of producing 1.53 × 10 9 ST m 3 of gas in 30 years by depressurization with a peak production rate of around 19.4 × 10 4 ST m 3 /day through a single horizontal well. To determine the effect of uncertainty in reservoir properties on the gas production, an uncertainty analysis is carried out. It is observed that for the range of data considered, the overall cumulative production from the Sunlight Peak will always be within the range of ±4.6% error from the overall mean value of 1.43 × 10 9 ST m 3 . A sensitivity analysis study showed that the proximity of the reservoir from the base of permafrost and the base of hydrate stability zone (BHSZ) has significant effect on gas production rates. The gas production rates decrease with the increase in the depth of the permafrost and the depth of BHSZ. From the overall analysis of the results it is concluded that Sunlight Peak gas hydrate accumulation behaves differently than other Class III reservoirs (Class III reservoirs are composed of a single layer of hydrate with no underlying zone of mobile fluids) due to its smaller thickness and high angle of dip.

Alaska↗

USGS2006

Cenozoic tectonic evolution of the basin and range province in northwestern Nevada

A regional synthesis of new and existing geologic and thermochronologic data document late Cretaceous - early Cenozoic regional erosion, Oligocene - Miocene volcanism, and subsequent late Miocene extension of the Basin and Range Province in northwestern Nevada and northeastern California. Across an ???220-km-wide region between the Santa Rosa and Warner Ranges, conformable sequences of 35 to 15 Ma volcanic rocks are cut by only a single generation of high-angle normal faults that accommodated ???23 km of total east-west extension (???12%). Fission-track, (U-Th)/He, geologic, and structural data from the Pine Forest Range show that faulting there began at 11 to 12 Ma, progressed at a relatively constant rate until at least 3 Ma, and has continued until near the present time. Extension in the Santa Rosa Range to the east took place during the same interval, although the post-6 Ma part of this history is less well constrained. Less complete constraints from adjacent ranges permit a similar timing for faulting, and we infer that extensional faulting in northwestern Nevada began everywhere at 12 Ma and has continued up to the present. Faulting in the Warner Range in northeastern California can only be constrained to have begun between 14 and 3 Ma, but may represent westward migration of Basin and Range extension during the Pliocene. Compared to the many parts of the Basin and Range in central and southern Nevada, extension in northwestern Nevada began more recently, is of lesser total magnitude, and was accommodated entirely by high-angle normal faults. Fission-track data document Late Cretaceous unroofing of Cretaceous (115 - 100 Ma) granitic basement rocks in northwestern Nevada, followed by a long period of relative tectonic quiescence that persisted through Oligocene and Miocene volcanism until the onset of Basin and Range extension at ???12 Ma. The low magnitude of extension (12%) and early Tertiary stability suggest that the modern ???31 km thick crust in northwestern Nevada was only slightly thicker (???35 km) prior to extension at 12 Ma, and was no thicker than ???38 km in the Late Cretaceous. This stands in contrast to other parts of the Basin and Range, where the crust was thickened to at least 45 to 50 km by Cretaceous thrusting and subsequently thinned to ???30 km by large magnitude (>50%) extension.

American Journal of Science↗