SEARCH · USGS Science

Results for “Geothermics”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 325 records · Page 18Linked to original sources

USGS2016

An experimental study of the role of subsurface plumbing on geothermal discharge

In order to better understand the diverse discharge styles and eruption intervals observed at geothermal features, we performed three series of laboratory experiments with differing plumbing geometries. A single, straight conduit that connects a hot water bath (flask) to a vent (funnel) can originate geyser-like periodic eruptions, continuous discharge like a boiling spring, and fumarole-like steam discharge, depending on the conduit length and radius. The balance between the heat loss from the conduit walls and the heat supplied from the bottom determines whether and where water can condense which in turn controls discharge style. Next, we connected the conduit to a cold water reservoir through a branch, simulating the inflow from an external water source. Colder water located at a higher elevation than a branching point can flow into the conduit to stop the boiling in the flask, controlling the periodicity of the eruption. When an additional branch is connected to a second cold water reservoir, the two cold reservoirs can interact. Our experiments show that branching allows new processes to occur, such as recharge of colder water and escape of steam from side channels, leading to greater variation in discharge styles and eruption intervals. This model is consistent with the fact that eruption duration is not controlled by emptying reservoirs. We show how differences in plumbing geometries can explain various discharge styles and eruption intervals observed in El Tatio, Chile, and Yellowstone, USA.

Geochemistry, Geophysics, Geosystems↗

USGS1978

Gases and water isotopes in a geochemical section across the Larderello, Italy, geothermal field

Steam samples from six wells (Colombaia, Pineta, Larderello 57, Larderello 155, Gabbro 6, and Gabbro 1) in a south to north section across the Larderello geothermal field have been analyzed for inorganic and hydrocarbon gases and for oxygen-18 and deuterium of steam. The wells generally decrease in depth and increase in age toward the south. The steam samples are generally characterized by (1) Total gas contents increasing south to north from 0.003 to 0.05 mole fraction; (2) Constant CO2 (95??2 percent); near constant H2S (1.6??0.8), N2 (1.2??0.8), H2 (2??1), CH4 (1.2??1), and no O2 in the dry gas; (3) Presence of numerous, straight chain and branched C2 to C6 hydrocarbons plus benzene in amounts independent of CH4 contents with highest concentrations in the deeper wells; (4) Oxygen-18 contents of steam increasing south to north from -5.0??? to -0.4??? with little change in deuterium (-42??2???). These observations are interpreted as showing: (1) Decreasing gas contents with amount of production because the proportion of steam boiled from liquid water increases with production; (2) Synthesis of CH4 from H2 and CO2 with CO2 and H2 produced by thermal metamorphism and rock-water reactions; (3) Extraction of C2 to C6 hydrocarbons from rock organic matter; (4) Either oxygen isotope exchange followed by distillation of steam from the north toward the south (2 plates at ???220??C) or mixture of deeper more-exchange waters from the north with shallow, less-exchanged recharging waters from the south. ?? 1978 Birkha??user Verlag.

Pure and Applied Geophysics PAGEOPH↗

USGS1985

A GC-system for the analysis of residual geothermal gases

The gases evolved from geothermal fields, after condensation of H2O, CO2, H2S and NH3 in caustic solution, contain He, H2, Ar, O2, N2, CH4 and higher hydrocarbons. The analysis for the major components in these residual gas mixtures can be achieved by use of two simple gas chromatographs in parallel, and using 5A?? molecular sieve. The separation of He and H2 to baseline is achieved by using low temperatures (30??C) coupled with a relatively long column; and the difficult separation of Ar and O2 is achieved by use of a cryogenically cooled column. The use of switching valves to backflush and bypass columns ensures that a minimum time for analysis can be achieved whilst retaining baseline separations of the He/H2 and Ar/O2 pairs. ?? 1985 Friedr. Vieweg & Sohn Verlagsgesellschaft mbH.

Chromatographia↗

USGS1964

Deep geothermal brine near Salton Sea, California

A well drilled for geothermal power near Salton Sea in Imperial Valley, Calif., is 5,232 feet deep; it is the deepest well in the world (1962) in a high-temperature hot spring area. In the lower half of the hole temperatures are too high to measure with available equipment, but are at loast 270°C, and may be as much as 370°C. For comparison, maximum temperature heretofore reported at depth (1962) for hot spring areas is 295°C. The well taps a very saline brine of Na-Ca-K-Cl type (about 185,000 ppm Cl) with exceptionally high potassium, and with the highest content of minor alkali elements known for natural waters; Fe, Mn, Zn, Pb, Cu, Ag, and some other metals are also exceptionally high. This brine may be connate, but present evidence favors a source in the magma chamber at depth that supplied late Quaternary rhyolite domes of the area. If the latter is correct, the brine is an undiluted magmatic water that is residual from the separation of a more volatile phase high in CO 2 , H 2 S, and with some alkali halides. Elsewhere, the hypothesized volatile phase may account for near-surface hot spring activity of most thermal areas of volcanic association. The residual brine of high salinity may ordinarily remain relatively deep in the volcanic systems because of high specific gravity and low content of volatiles, seldom appearing at the surface except in a greatly diluted form. The hot springs of Arima, Japan, may be a rare example of this type of magmatic water discharging at the surface in moderate concentration (Cl as much as 42,000 ppm). Independent evidence from fluid inclusions in minerals of high-temperature base-metal deposits also favors the existence of magmatic water high in Na, Ca, and Cl, and low in CO 2 and other volatile components. During a three-month production test several tons of material precipitated in the horizontal discharge pipe from the well. Amorphous silica with iron and manganese, and bornite are the dominant recognized components. This material contains the astonishingly high contents of about 20 percent copper, 2 percent silver, and notable sulfur, arsenic, bismuth, lead, antimony, and some other minor elements. Total quantities of all elements in the original whole brine are not yet known, but calculated amounts corresponding to 1 to 3 ppm of copper and 0.1 to 0.3 ppm of silver were precipitated from the brine to form the pipe deposits. The brine, therefore, may be man’s first sample of an « active » ore solution. Equally fascinating to many geologists is the possibility that in the lower part of the hole temperatures are so high and pressures are sufficient for young sedimentary rocks to be undergoing transformation into rocks with mineral assemblages of the greenschist facies of metamorphism. Drill cores from 4,400 to 5,000 feet in depth contain chlorite, albite, K-feldspar, epidote, mica, and quartz, with some indication of increase in metamorphic grade downward. Regional geological and geophysical studies favor a depth of about 20,000 feet to pre-Tertiary basement rocks in the general area. A shallow basement or local upfaulting of old metamorphic rocks are not likely possibilities for the thermal area.

California↗

USGS1988

Carbon isotope geochemistry of hydrocarbons in the Cerro Prieto geothermal field, Baja California Norte, Mexico

Hydrocarbon abundances and stable-isotopic compositions were measured in wells M5, M26, M35 and M102, which represent a range of depths (1270-2000 m) and temperatures (275-330??C) in the field. In order to simulate the production of the geothermal hydrocarbons, gases were collected from the pyrolysis of lignite in the laboratory. This lignite was obtained from a well which sampled rock strata which are identical to those occurring in the field, but which have experienced much lower subsurface temperatures. In both the well and the laboratory observations, high-temperature environments favored higher relative concentrations of methane, ethane and benzene and generally higher ??13C-values in the individual hydrocarbons. The best correlation between the laboratory and well data is obtained when laboratory-produced gases from experiments conducted at lower (400??C) and higher (600??C) temperatures are mixed. This improved correlation suggests that the wells are sampling hydrocarbons produced from a spectrum of depths and temperatures in the sediments. ?? 1988.

Chemical Geology↗

USGS1977

Ore transport and deposition in the Red Sea geothermal system: a geochemical model

Thermodynamic calculation of distribution of dissolved aqueous species in the Red Sea geothermal brine provides a model of ore transport and deposition in good agreement with observed accumulations of base metal sulfides, anhydrite, and barite. The Red Sea brine is recirculated seawater that acquires high salinity by low-temperature interaction with Miocene evaporites and is subsequently heated to temperatures in excess of 200°C by interaction with recent rift zone intrusive rocks. At temperatures up to 250°C, NaSO − 4 and MgSO 0 4 are the dominant sulfur-bearing species. H 2 S forms by inorganic sulfate reduction at the higher temperatures but is maintained at a uniform concentration of about 2 ppm by the strength of the sulfate complexes. Chloride complexes solubilize metals at the higher temperatures, and thus sulfide and metals are carried together into the Atlantis II Deep. Below 150°C, the brine becomes supersaturated with respect to chalcopyrite, sphalerite, galena, and iron monosulfide due to chloride-complex dissociation. Sulfide precipitation rates, based on the rate of brine influx, are in good agreement with measured sedimentation rates. Anhydrite precipitates as crystalline fissure infillings from high-temperature inflowing brine. Barite forms from partial oxidation of sulfides at the interface between the lower hot brine and the transitional brine layer.

Geochimica et Cosmochimica Acta↗

USGS1984

Arsenic and antimony in geothermal waters of Yellowstone National Park, Wyoming, USA

A total of 268 thermal spring samples were analyzed for total soluble As using reduced molybdenum-blue; 27 of these samples were also analyzed for total Sb using flame atomic absorption spectrometry. At Yellowstone the Cl As "> ClAs atomic ratio is nearly constant among neutral-alkaline springs with Cl > 100 mg L −1 , and within restricted geographic areas, indicating no differential effects of adiabatic vs . conductive cooling on arsenic. The Cl As "> ClAs ratio increases with silica and decreases with decreasing Cl ΣCO 3 "> ClΣCO3 ; the latter relationship is best exemplified for springs along the extensively sampled SE-NW trend within the Lone Star-Upper-Midway Basin region. The relationship between Cl As "> ClAs and Cl ΣCO 3 "> ClΣCO3 at Yellowstone suggests a possible rock leaching rather than magmatic origin for much of the Park's total As flux. Condensed vapor springs are low in both As and Cl. Very high Cl As "> ClAs ratios ( > 1000) are associated exclusively with highly diluted (Cl < 100 mg L −1 ) mixed springs in the Norris and Shoshone Basins and in the Upper White Creek and Firehole Lake areas of Lower Basin. The high ratios are associated with acidity and/or oxygen and iron; they indicate precipitation of As following massive dilution of the Asbearing high-Cl parent water. Yellowstone Sb ranged from 0.009 at Mammoth to 0.166 mg L −1 at Joseph's Coat Spring. Within basins, the Cl Sb "> ClSb ratio increases as the Cl ΣCO 3 "> ClΣCO3 ratio decreases, in marked contrast to As. Mixed springs also have elevated Cl Sb "> ClSb ratios. White (1967) and Weissberg (1969) previously reported stibnite (Sb 2 S 3 ), but not orpiment (As 2 S 3 ), precipitating in the near surface zone of alkaline geothermal systems.

Geochimica et Cosmochimica Acta↗

USGS1986

Uranium geochemistry in geopressured-geothermal aquifers of the U.S. Gulf Coast

Formation water from U.S. Gulf Coast geopressured-geothermal sandstone aquifers has been analyzed to determine the geochemistry of uranium in these systems. Results of chemical analyses and chemical equilibrium modeling indicate the formation waters are in equilibrium with uraninite (UO 2 ) and coffinite (USiO 4 ). The 234 U 238 U "> 234 U 238 U activity ratios in the formation waters range from 1.06 to 1.69. These isotopic data suggest that at formation temperatures uranium is continually reequilibrating chemically and isotopically between water, a solid phase of either UO 2 or USiO 4 and a component of 234 U supplied to solution from the aquifer matrix material by alpha recoil processes.

Geochimica et Cosmochimica Acta↗

USGS1989

On numerical modeling of one-dimensional geothermal histories

Numerical models of one-dimensional geothermal histories are one way of understanding the relations between tectonics and transient thermal structure in the crust. Such models can be powerful tools for interpreting geochronologic and thermobarometric data. A flexible program to calculate these models on a microcomputer is available and examples of its use are presented. Potential problems with this approach include the simplifying assumptions that are made, limitations of the numerical techniques, and the neglect of convective heat transfer. ?? 1989.

Computers & Geosciences↗

USGS2018

Testing for the ‘predictability’ of dynamically triggered earthquakes in Geysers Geothermal Field

The Geysers geothermal field is well known for being susceptible to dynamic triggering of earthquakes by large distant earthquakes, owing to the introduction of fluids for energy production. Yet, it is unknown if dynamic triggering of earthquakes is ‘predictable’ or whether dynamic triggering could lead to a potential hazard for energy production. In this paper, our goal is to investigate the characteristics of triggering and the physical conditions that promote triggering to determine whether or not triggering is in anyway foreseeable. We find that, at present, triggering in The Geysers is not easily ‘predictable’ in terms of when and where based on observable physical conditions. However, triggered earthquake magnitude positively correlates with peak imparted dynamic stress, and larger dynamic stresses tend to trigger sequences similar to mainshock–aftershock sequences. Thus, we may be able to ‘predict’ what size earthquakes to expect at The Geysers following a large distant earthquake.

California↗

USGS2006

Speciation of volatile arsenic at geothermal features in Yellowstone National Park

Geothermal features in the Yellowstone National Park contain up to several milligram per liter of aqueous arsenic. Part of this arsenic is volatilized and released into the atmosphere. Total volatile arsenic concentrations of 0.5–200 mg/m 3 at the surface of the hot springs were found to exceed the previously assumed nanogram per cubic meter range of background concentrations by orders of magnitude. Speciation of the volatile arsenic was performed using solid-phase micro-extraction fibers with analysis by GC–MS. The arsenic species most frequently identified in the samples is (CH 3 ) 2 AsCl, followed by (CH 3 ) 3 As, (CH 3 ) 2 AsSCH 3 , and CH 3 AsCl 2 in decreasing order of frequency. This report contains the first documented occurrence of chloro- and thioarsines in a natural environment. Toxicity, mobility, and degradation products are unknown.

Idaho, Montana, Wyoming↗

USGS2007

Diel mercury-concentration variations in streams affected by mining and geothermal discharge

Diel variations of concentrations of unfiltered and filtered total Hg and filtered methyl Hg were documented during 24-h sampling episodes in water from Silver Creek, which drains a historical gold-mining district near Helena, Montana, and the Madison River, which drains the geothermal system of Yellowstone National Park. The concentrations of filtered methyl Hg had relatively large diel variations (increases of 68 and 93% from morning minima) in both streams. Unfiltered and filtered (0.1-μm filtration) total Hg in Silver Creek had diel concentration increases of 24% and 7%, respectively. In the Madison River, concentrations of unfiltered and filtered total Hg did not change during the sampling period. The concentration variation of unfiltered total Hg in Silver Creek followed the diel variation in suspended-particle concentration. The concentration variation of filtered total and methyl Hg followed the solar photocycle, with highest concentrations during the early afternoon and evening and lowest concentrations during the morning. None of the diel Hg variations correlated with diel variation in streamflow or major ion concentrations. The diel variation in filtered total Hg could have been produced by adsorption–desorption of Hg 2+ or by reduction of Hg(II) to Hg 0 and subsequent evasion of Hg 0 . The diel variation in filtered methyl Hg could have been produced by sunlight- and temperature-dependent methylation. This study is the first to examine diel Hg cycling in streams, and its results reinforce previous conclusions that diel trace-element cycling in streams is widespread but often not recognized and that parts of the biogeochemical Hg cycle respond quickly to the daily photocycle.

Montana↗

USGS2000

Geothermal convection: a mechanism for dolomitization at Enewetak Atoll?

Geothermal convection in carbonate platforms could drive massive dolomitization by supplying mass transport of magnesium over long periods and at temperatures high enough to overcome kinetic limitations. Reactive-transport simulations based on Enewetak Atoll show dolomitization in a thin band at a permeability contrast near the base of the platform, which is consistent with field observations of dolomitized Eocene deposits. Dolomitization is predicted at approximately 6% per My at temperatures of 45–60°C, and complete dolomitization could be accomplished in ∼16 My. Calcium enrichment of pore fluids and upward transport of these fluids is established early, prior to 30 ky.

Book↗

USGS2000

The dependence of permeability on effective stress for an injection test in the Higashi-Hachimantai Geothermal Field

A simple inverse-power relation for the influence of effective stress on permeability is used to explain the flow behavior during an injection test at the Higashi-Hachimantai geothermal field, Japan. The new analytical expression successfully models data from the experiment involving high-pressure injection and monitoring at an observation well.

Geophysical Research Letters↗

USGS1996

Non-double-couple earthquake mechanisms at the Geysers geothermal area, California

Inverting P- and S-wave polarities and P:SH amplitude ratios using linear programming methods suggests that about 20% of earthquakes at The Geysers geothermal area have significantly non-double-couple focal mechanisms, with explosive volumetric components as large as 33% of the seismic moment. This conclusion contrasts with those of earlier studies, which interpreted data in terms of double couples. The non-double-couple mechanisms are consistent with combined shear and tensile faulting, possibly caused by industrial water injection. Implosive mechanisms, which might be expected because of rapid steam withdrawal, have not been found. Significant compensated-linear-vector-dipole (CLVD) components in some mechanisms may indicate rapid fluid flow accompanying crack opening. Copyright 1996 by the American Geophysical Union.

California↗

USGS1997

Land subsidence caused by the East Mesa geothermal field, California, observed using SAR interferometry

Interferometric combination of pairs of synthetic aperture radar (SAR) images acquired by the ERS-1 satellite maps the deformation field associated with the activity of the East Mesa geothermal plant, located in southern California. SAR interferometry is applied to this flat area without the need of a digital terrain model. Several combinations are used to ascertain the nature of the phenomenon. Short term interferograms reveal surface phase changes on agricultural fields similar to what had been observed previously with SEASAT radar data. Long term (2 years) interferograms allow the study of land subsidence and improve prior knowledge of the displacement field, and agree with existing, sparse levelling data. This example illustrates the power of the interferometric technique for deriving accurate industrial intelligence as well as its potential for legal action, in cases involving environmental damages.

Geophysical Research Letters↗

USGS2012

Heat-flow data and their relation to observed geothermal phenomena near Klamath Falls, Oregon

Two holes were drilled to depths of about 180 m in the Lower Klamath Lake basin south of Klamath Falls, Oregon, to obtain heat flow data and to provide estimates of the thermal conductivity of the valley fill. Twenty-nine thermal conductivity determinations on eight cores give a mean conductivity of 1.82 mcal/cm s °C (0.75 W/m °K). Curvature in the upper 50 m of both terriperature profiles indicates a decrease in surface temperature of about 1.8°C, presumably resulting frorn reclamation of what was marshland in the early part of this century. A surprisingly low heat flow of 0.3 HFU (1 HFU = 10 −6 cal/cm 2 s = 41.8 mW/m 2 ) was measured at site LS near the center of the basin. At site OC-1, 7 km east of LS and 2 km from the Klamath Hills geothermal zone, the heat flow was 1.44 HFU, also a low value in this setting. Temperature profiles in 15 unused water wells in the area had linear gradients ranging from 47° to 170°C/km. The corresponding lower limits of heat flow (conductivities measured at the two heat flow sites being used) range from 0.8 to 3.1 HFU. These variations in heat flow evidently are caused by temperature variations in a convecting system within the near-surface volcanic rocks and do not provide firm constraints on the nature of heat sources at depth.

Journal of Geophysical Research↗

USGS2012

Distribution of Quaternary rhyolite domes of the Coso Range, California: implications for extent of the geothermal anomaly.

38 separate domes and flows of phenocryst-poor, high-silica rhyolite of similar major element chemical composition were erupted over the past 1My from vents arranged in a crudely S-shaped array atop a granitic horst in the Coso Range, California. Most of the extrusions are probably less than about 0.3My old. The central part of the rhyolite field is characterized by high heat flow, low apparent resistivity, and substantial fumarolic activity indicative of an active geothermal system.

California↗