SEARCH · USGS Science

Results for “Geology Today”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 325 records · Page 18Linked to original sources

USGS2014

The 3D Elevation Program: summary for North Carolina

Elevation data are essential to a broad range of applications, including forest resources management, wildlife and habitat management, national security, and recreation. For the State of North Carolina, elevation data are critical for flood risk management, natural resources conservation, agriculture and precision farming, infrastructure and construction management, forest resources management, and other business uses. Today, high-density light detection and ranging (lidar) data are the primary sources for deriving elevation models and other datasets. Federal, State, Tribal, and local agencies work in partnership to (1) replace data that are older and of lower quality and (2) provide coverage where publicly accessible data do not exist. A joint goal of State and Federal partners is to acquire consistent, statewide coverage to support existing and emerging applications enabled by lidar data. The National Enhanced Elevation Assessment (NEEA; Dewberry, 2011) evaluated multiple elevation data acquisition options to determine the optimal data quality and data replacement cycle relative to cost to meet the identified requirements of the use community. The evaluation demonstrated that lidar acquisition at quality level 2 for the conterminous United States and quality level 5 interferometric synthetic aperture radar (ifsar) data for Alaska with a 6- to 10-year acquisition cycle provided the highest benefit/cost ratios. The 3D Elevation Program (3DEP) initiative selected an 8-year acquisition cycle for the respective quality levels. 3DEP, managed by the U.S. Geological Survey, the Office of Management and Budget Circular A–16 lead agency for terrestrial elevation data, responds to the growing need for high-quality topographic data and a wide range of other 3D representations of the Nation’s natural and constructed features.

North Carolina↗

USGS2014

The 3D Elevation Program: summary for Oklahoma

Elevation data are essential to a broad range of applications, including forest resources management, wildlife and habitat management, national security, recreation, and many others. For the State of Oklahoma, elevation data are critical for flood risk management, infrastructure and construction management, agriculture and precision farming, natural resources conservation, wildlife and habitat management, and other business uses. Today, high-density light detection and ranging (lidar) data are the primary sources for deriving elevation models and other datasets. Federal, State, Tribal, and local agencies work in partnership to (1) replace data that are older and of lower quality and (2) provide coverage where publicly accessible data do not exist. A joint goal of local, State, and Federal partners is to acquire consistent, statewide coverage to support existing and emerging applications enabled by lidar data. The National Enhanced Elevation Assessment (NEEA; Dewberry, 2011) evaluated multiple elevation data acquisition options to determine the optimal data quality and data replacement cycle relative to cost to meet the identified requirements of the user community. The evaluation demonstrated that lidar acquisition at quality level 2 for the conterminous United States and quality level 5 interferometric synthetic aperture radar (ifsar) data for Alaska with a 6- to 10-year acquisition cycle provided the highest benefit/cost ratios. The 3D Elevation Program (3DEP) initiative selected an 8-year acquisition cycle for the respective quality levels. 3DEP, managed by the U.S. Geological Survey (USGS), the Office of Management and Budget Circular A–16 lead agency for terrestrial elevation data, responds to the growing need for high-quality topographic data and a wide range of other 3D representations of the Nation’s natural and constructed features.

Oklahoma↗

USGS2021

Geologic framework of Mount Diablo, California

The basic stratigraphic and structural framework of Mount Diablo is described using a revised geologic map, gravity data, and aeromagnetic data. The mountain is made up of two distinct stratigraphic assemblages representing different depocenters that were juxtaposed by ~20 km of late Pliocene and Quaternary right-lateral offset on the Greenville-Diablo-Concord fault. Both assemblages are composed of Cretaceous and Cenozoic strata overlying a compound basement made up of the Franciscan and Great Valley complexes. The rocks are folded and faulted by late Neogene and Quaternary compressional structures related to both regional plate-boundary–normal compression and a restraining step in the strike-slip fault system. The core of the mountain is made up of uplifted basement rocks. Late Neogene and Quaternary deformation is overprinted on Paleogene extensional deformation that is evidenced at Mount Diablo by significant attenuation in the basement rocks and by an uptilted stepped graben structure on the northeast flank. Retrodeformation of the northeast flank suggests that late Early to early Late Cretaceous strata may have been deposited against and across a steeply west-dipping basement escarpment. The location of the mountain today was a depocenter through the Late Cretaceous and Paleogene and received shallow-marine deposits periodically into the late Miocene. Uplift of the mountain itself happened mostly in the Quaternary.

California↗

USGS2023

Global seismic networks operated by the U.S. Geological Survey

The U.S. Geological Survey (USGS) Global Seismographic Network (GSN) Program operates two thirds of the GSN, a network of state‐of‐the‐art, digital seismological and geophysical sensors with digital telecommunications. This network serves as a multiuse scientific facility and a valuable resource for research, education, and monitoring. The other one third of the GSN is funded by the National Science Foundation (NSF), and the operations of this component are overseen by EarthScope. This collaboration between the USGS, EarthScope, and NSF has allowed for the development and operations of the GSN to be a truly multiuse network that provides near real‐time open access data, facilitating fundamental discoveries by the Earth science community, supporting the earthquake hazards mission of the USGS, benefitting tsunami monitoring by the National Oceanic and Atmospheric Administration, and contributing to nuclear test monitoring and treaty verification. In this article, we describe the installation and evolution of the seismic networks operated by the USGS that ultimately led to the USGS portion of the GSN (100 stations under network codes IU, IC, and CU) as they are today and envision technological advances and opportunities to further improve the utility of the network in the future. This article focuses on the USGS‐operated component of the GSN; a companion article on the GSN stations funded by the NSF and operated by the Cecil and Ida Green Institute of Geophysics and Planetary Physics, Scripps Institution of Oceanography, University of California at San Diego by Davis et al. (2023) appears in this volume.

Seismological Research Letters↗

USGS2000

Map of Distribution of Bottom Sediments on the Continental Shelf, Gulf of Alaska

Introduction The U.S. Geological Survey has a long history of exploring marine geology in the Gulf of Alaska. As part of a cooperative program with other federal and state agencies, the USGS is investigating the relations between ocean-floor geology and benthic marine biohabitats. This bottom sediment map, compiled from published literature will help marine biologists develop an understanding of sea-floor geology in relation to various biological habitats. The pattern of sea-floor sedimentation and bottom morphology in the Gulf of Alaska reflects a complex interplay of regional tectonism, glacial advances and retreats, oceanic and tidal currents, waves, storms, eustatic change, and gravity-driven processes. This map, based on numerous cruises during the period of 1970-1996, shows distribution of bottom sediments in areas of study on the continental shelf. The samples were collected with piston, box, and gravity corers, and grab samplers. The interpretations of sediment distribution are the products of sediment size analyses combined with interpretations of high-resolution seismic reflection profiles. The sea floor was separated into several areas as follows: Cook Inlet -- Hazards studies in this embayment emphasized sediment distribution, sediment dynamics, bedforms, shallow faults, and seafloor stability. Migrating mega-sandwaves, driven by strong tidal currents, influence seabed habitats and stability of the seafloor, especially near pipelines and drilling platforms. The coarseness of the bottom sediment reinforces the influence of the strong tidal currents on the seafloor habitats. Kodiak Shelf -- Tectonic framework studies demonstrate the development of an accretionary wedge as the Pacific Plate underthrusts the Alaskan landmass. Seismic data across the accretionary wedge reveal anomalies indicative of fluid/gas vent sites in this segment of the continental margin. Geologic hazards research shows that movement along numerous shallow faults poses a risk to sea floor structures. Sea-floor sediment on shallow banks is eroded by seasonal wave-generated currents. The winnowing action of the large storm waves results in concentrations of gravel over broad segments of the Kodiak shelf. Northeastern Gulf of Alaska -- Tectonic framework studies demonstrate that rocks of distant origin (Yakutat terrane) are currently attached to and moving with the Pacific Plate, as it collides with and is subducted beneath southern Alaska. This collision process has led to pronounced structural deformation of the continental margin and adjacent southern Alaska. Consequences include rapidly rising mountains and high fluvial and glacial sedimentation rates on the adjacent margin and ocean floor. The northeastern Gulf of Alaska shelf also has concentrations of winnowed (lag) gravel on Tarr Bank and on the outer shelf southeast of Yakutat Bay. Between Kayak Island and Yakutat Bay the outer shelf consists of pebbly mud (diamict). This diamict is a product of glacial marine sedimentation during the Pleistocene and is present today as a relict sediment. A prograding wedge of Holocene sediment consisting of nearshore sand grading seaward into clayey silt and silty clay covers the relict pebbly mud to mid-shelf and beyond. Shelf and slope channel systems transport glacially derived sediment across the continental margin into Surveyor Channel, an abyssal fan and channel system that reaches over 1,000 km to the Aleutian Trench.

Miscellaneous Field Studies Map↗

USGS2010

The Quaternary Silver Creek Fault Beneath the Santa Clara Valley, California

The northwest-trending Silver Creek Fault is a 40-km-long strike-slip fault in the eastern Santa Clara Valley, California, that has exhibited different behaviors within a changing San Andreas Fault system over the past 10-15 Ma. Quaternary alluvium several hundred meters thick that buries the northern half of the Silver Creek Fault, and that has been sampled by drilling and imaged in a detailed seismic reflection profile, provides a record of the Quaternary history of the fault. We assemble evidence from areal geology, stratigraphy, paleomagnetics, ground-water hydrology, potential-field geophysics, and reflection and earthquake seismology to determine the long history of the fault in order to evaluate its current behavior. The fault formed in the Miocene more than 100 km to the southeast, as the southwestern fault in a 5-km-wide right step to the Hayward Fault, within which the 40-km-long Evergreen pull-apart basin formed. Later, this basin was obliquely cut by the newly recognized Mt. Misery Fault to form a more direct connection to the Hayward Fault, although continued growth of the basin was sufficient to accommodate at least some late Pliocene alluvium. Large offset along the San Andreas-Calaveras-Mt Misery-Hayward Faults carried the basin northwestward almost to its present position when, about 2 Ma, the fault system was reorganized. This led to near abandonment of the faults bounding the pull-apart basin in favor of right slip extending the Calaveras Fault farther north before stepping west to the Hayward Fault, as it does today. Despite these changes, the Silver Creek Fault experienced a further 200 m of dip slip in the early Quaternary, from which we infer an associated 1.6 km or so of right slip, based on the ratio of the 40-km length of the strike-slip fault to a 5-km depth of the Evergreen Basin. This dip slip ends at a mid-Quaternary unconformity, above which the upper 300 m of alluvial cover exhibits a structural sag at the fault that we interpret as a negative flower structure. This structure implies some continuing strike slip on the Silver Creek Fault in the late Quaternary as well, with a transtensional component but no dip slip. Our only basis for estimating the rate of this later Quaternary strike slip on the Silver Creek Fault is to assume continuation of the inferred early Quaternary rate of less than 2 mm/yr. Faulting evident in a detailed seismic reflection profile across the Silver Creek Fault extends up to the limit of data at a depth of 50 m and age of about 140 ka, and the course of Coyote Creek suggests Holocene capture in a structural depression along the fault. No surface trace is evident on the alluvial plain, however, and convincing evidence of Holocene offset is lacking. Few instrumentally recorded earthquakes are located near the fault, and those that are near its southern end represent cross-fault shortening, not strike slip. The fault might have been responsible, however, for two poorly located moderate earthquakes that occurred in the area in 1903. Its southeastern end does mark an abrupt change in the pattern of abundant instrumentally recorded earthquakes along the Calaveras Fault-in both its strike and in the depth distribution of hypocenters-that could indicate continuing influence by the Silver Creek Fault. In the absence of convincing evidence to the contrary, and as a conservative estimate, we presume that the Silver Creek Fault has continued its strike-slip movement through the Holocene, but at a very slow rate. Such a slow rate would, at most, yield very infrequent damaging earthquakes. If the 1903 earthquakes did, in fact, occur on the Silver Creek Fault, they would have greatly reduced the short-term future potential for large earthquakes on the fault.

Open-File Report↗

USGS2016

The 3D Elevation Program: summary for Puerto Rico

Elevation data are essential to a broad range of applications, including forest resources management, wildlife and habitat management, scientific research, national security, recreation, and many others. For the Commonwealth of Puerto Rico, elevation data are critical for flood risk management, landslide mitigation, natural resources conservation, sea level rise and subsidence, coastal zone management, infrastructure and construction management, and other business uses. Today, high-density light detection and ranging (lidar) data are the primary sources for deriving elevation models and other datasets. Federal, State, Tribal, U.S. territorial, and local agencies work in partnership to (1) replace data that are older and of lower quality and (2) provide coverage where publicly accessible data do not exist. A joint goal of State and Federal partners is to acquire consistent, statewide coverage to support existing and emerging applications enabled by lidar data. The National Enhanced Elevation Assessment evaluated multiple elevation data acquisition options to determine the optimal data quality and data replacement cycle relative to cost to meet the identified requirements of the user community. The evaluation demonstrated that lidar acquisition at quality level 2 for the conterminous United States, Hawaii, and selected U.S. territories, and quality level 5 interferometric synthetic aperture radar (IfSAR) data for Alaska, all with a 6- to 10-year acquisition cycle, provided the highest benefit/cost ratios. The 3D Elevation Program (3DEP) initiative selected an 8-year acquisition cycle for the respective quality levels. 3DEP, managed by the U.S. Geological Survey (USGS), the Office of Management and Budget Circular A‒16 lead agency for terrestrial elevation data, responds to the growing need for high-quality topographic data and a wide range of other three-dimensional (3D) representations of the Nation’s natural and constructed features.

Puerto Rico↗

USGS2022

Groundwater resources of the Harney Basin, southeastern Oregon

Groundwater development has increased substantially in southeastern Oregon’s Harney Basin since 2010, mainly for the purpose of large-scale irrigation. Concurrently, some areas of the basin experienced groundwater-level declines of more than 100 feet, and some shallow wells have gone dry. The Oregon Water Resources Department has limited new groundwater development in the basin until an improved understanding of the groundwater-flow system is available. This report describes the results of a hydrologic investigation undertaken to provide that understanding. The investigation encompasses the groundwater hydrology of the entire 5,240-square-mile Harney Basin. Most of the precipitation in the Harney Basin falls in the higher-elevation areas of the Blue Mountains and Steens Mountain. Although considerable groundwater recharge occurs in these upland areas, most (83 percent) re-emerges as streams and springs in the uplands. Groundwater recharge in the lowlands is provided through infiltration of surface water flowing onto the lowlands from rivers and streams leaving the uplands and as groundwater flow from the surrounding upland rocks. Water-balance calculations indicate that the rate of groundwater recharge to the Harney Basin lowlands (where most groundwater is withdrawn) averages 173,000 acre-feet per year (acre-ft/yr). Groundwater in the Harney Basin lowlands mainly discharges through evapotranspiration from groundwater-irrigated (supplied from wells) crops or from natural vegetation drawing groundwater from the shallow water table and capillary fringe. Groundwater discharge in the lowlands is estimated to be about 283,000 acre-ft/yr, which exceeds the estimated groundwater recharge to the lowlands by about 110,000 acre-ft/yr. This imbalance results in removal of groundwater from storage in the aquifer system and is evidenced by the large declines observed in groundwater levels in the areas of greatest groundwater pumpage. To a large degree, the location and depth of pumpage dictate the timing and distribution of the effects of groundwater use in the Harney Basin. Pumpage is commonly greatest in the areas where higher-permeability geologic units allow for higher well yields. However, many of these higher-permeability units are bounded by lower-permeability units that cannot supply groundwater at a sufficient rate to replenish the areas of greatest pumpage, resulting in groundwater-level declines. Three Harney Basin areas with a combined area exceeding 140 square miles have experienced groundwater-level declines exceeding 40 feet compared to pre-development conditions: near the Weaver Spring/Dog Mountain area, in the northeastern floodplains along Highway 20, and near Crane. Areas of more modest groundwater-level decline (about 10 feet) were identified in the Virginia Valley area and the Silver Creek floodplain north of Riley. Smaller localized areas of groundwater-level depression have also formed around individual wells or groups of wells throughout the Harney Basin lowlands. Most groundwater being pumped from the Harney Basin lowlands, including all three areas experiencing large groundwater-level declines, was recharged more than 12,000 years ago, near the end of the last glacial period when the climate in the basin was cooler and wetter than today. Geochemical evidence indicates that modern recharge generally circulates to a depth no greater than 100 feet below the floodplains of major rivers and streams in the lowlands. Away from the major river and stream corridors, pre-modern water commonly is found at the water table. Recharge to groundwater and recovery of groundwater levels in the most heavily pumped areas in the Harney Basin lowlands are restricted by the limited spatial extent and depth of modern recharge in the Harney Basin lowlands and the relatively fine-grained deposits underlying most of the lowland areas.

Oregon↗

USGS1956

Geology of Devils Tower National Monument, Wyoming

Devils Tower is a steep-sided mass of igneous rock that rises above the surrounding hills and the valley of the Belle Fourche River in Crook County, Wyo. It is composed of a crystalline rock, classified as phonolite porphyry, that when fresh is gray but which weathers to green or brown. Vertical joints divide the rock mass into polygonal columns that extend from just above the base to the top of the Tower. The hills in the vicinity and at the base of the Tower are composed of red, yellow, green, or gray sedimentary rocks that consist of sandstone, shale, or gypsum. These rocks, in aggregate about 400 feet thick, include, from oldest to youngest, the upper part of the Spearfish formation, of Triassic age, the Gypsum Spring formation, of Middle Jurassic age, and the Sundance formation, of Late Jurassic age. The Sundance formation consists of the Stockade Beaver shale member, the Hulett sandstone member, the Lak member, and the Redwater shale member. The formations have been only slightly deformed by faulting and folding. Within 2,000 to 3.000 feet of the Tower, the strata for the most part dip at 3 deg - 5 deg towards the Tower. Beyond this distance, they dip at 2 deg - 5 deg from the Tower. The Tower is believed to have been formed by the intrusion of magma into the sedimentary rocks, and the shape of the igneous mass formed by the cooled magma is believed to have been essentially the same as the Tower today. Devils Tower owes its impressiveness to its resistance to erosion as compared with the surrounding sedimentary rocks, and to the contrast of the somber color of the igneous column to the brightly colored bands of sedimentary rocks.

Bulletin↗

USGS2011

Geologic map of the Chisos Mountains, Big Bend National Park, Texas

The Chisos Mountains form some of the highest ground in Texas, second only to Guadalupe Peak near the New Mexico border. The northern half of the range is mostly above 5,500 feet with Emory Peak the high point at 7,825 feet. The mountains are centrally located in Big Bend National Park between Panther Junction and Punta de la Sierra. Big Bend National Park lies near the diffuse border between the Great Plains Province to the northeast and the Sonoran section of the Basin-and-Range structural province to the west and southwest. These geologically unique regions are distinguished from one another by large differences in their landscape and by the amount and style of internal structural deformation. The Great Plains Province is characterized by flat-lying or gently dipping sedimentary strata, low topographic relief, shallow stream valleys, and by a general lack of faulting. Very little active deposition is occurring on the plains, except in the bottoms of active stream valleys. In southwestern Texas the plains stand at average elevations of 2,000 to 3,300 feet and slope gently east toward the Mississippi River and the Gulf of Mexico. The Great Plains have remained relatively unchanged for the last 65 million years, except that they have been uplifted to their present height from lower elevations probably in the last 5 million years. The Basin-and-Range province is characterized by linear parallel mountain ranges, deep sediment-filled valleys, and high structural and topographic relief. The eastern part of the province is at a slightly higher average elevation than the plains. The province is known for its complex patterns of Cenozoic faulting. Today it bears little resemblance to the way it was during the Paleocene when the entire Trans-Pecos region was a simple lowland that was near or slightly below sea level.

Scientific Investigations Map↗

USGS1996

Preliminary investigation of the distribution and resources of coal in the Kaiparowits Plateau, southern Utah

This report on the coal resources of the Kaiparowits Plateau, Utah is a contribution to the U.S. Geological Survey's (USGS) 'National Coal Resource Assessment' (NCRA), a five year effort to identify and characterize the coal beds and coal zones that could potentially provide the fuel for the Nation's coal-derived energy during the first quarter of the twenty-first century. For purposes of the NCRA study, the Nation is divided into regions. Teams of geoscientists, knowledgeable about each region, are developing the data bases and assessing the coal within each region. The five major coal-producing regions of the United States under investigation are: (1) the Appalachian Basin; (2) the Illinois Basin; (3) the Gulf of Mexico Coastal Plain; (4) the Powder River Basin and the Northern Great Plains; and (5) the Rocky Mountains and the Colorado Plateau. Six areas containing coal deposits in the Rocky Mountain and Colorado Plateau Region have been designated as high priority because of their potential for development. This report on the coal resources of the Kaiparowits Plateau is the first of the six to be completed. The coal quantities reported in this study are entirely 'resources' and represent, as accurately as the data allow, all the coal in the ground in beds greater than one foot thick. These resources are qualified and subdivided by thickness of coal beds, depth to the coal, distance from known data points, and inclination (dip) of the beds. The USGS has not attempted to estimate coal 'reserves' for this region. Reserves are that subset of the resource that could be economically produced at the present time. The coal resources are differentiated into 'identified' and 'hypothetical' following the standard classification system of the USGS (Wood and others, 1983). Identified resources are those within three miles of a measured thickness value, and hypothetical resources are further than three miles from a data point. Coal beds in the Kaiparowits Plateau are laterally discontinuous relative to many other coal bearing regions of the United States. That is, they end more abruptly and are more likely to fragment or split into thinner beds. Because of these characteristics, the data from approximately 160 drill holes and 40 measured sections available for use in this study are not sufficient to determine what proportion of the resources is technologically and economically recoverable. The Kaiparowits Plateau contains an original resource of 62 billion short tons of coal in the ground. Original resource is defined to include all coal beds greater than one foot thick in the area studied. None of the resource is recoverable by surface mining. However, the total resource figure must be regarded with caution because it does not reflect geologic, technological, land-use, and environmental restrictions that may affect the availability and the recoverability of the coal. At least 32 billion tons of coal are unlikely to be mined in the foreseeable future because the coal beds are either too deep, too thin to mine, inclined at more than 12?, or in beds that are too thick to be completely recovered in underground mining. The estimated balance of 30 billion tons of coal resources does not reflect land use or environmental restrictions, does not account for coal that would be bypassed due to mining of adjacent coal beds, does not consider the amount of coal that must remain in the ground for roof support, and does not take into consideration the continuity of beds for mining. Although all of these factors will reduce the amount of coal that could be recovered, there is not sufficient data available to estimate recoverable coal resources. For purposes of comparison, studies of coal resources in the eastern United States have determined that less than 10 percent of the original coal resource, in the areas studied, could be mined economically at today's prices (Rohrbacher and others, 1994).

Open-File Report↗

USGS2024

Insights into glendonite formation from the upper Oligocene Sagavanirktok Formation, North Slope, Alaska

The type locality for the upper Oligocene Nuwok Member of the Sagavanirktok Formation (Carter Creek, North Slope, Alaska, USA) contains abundant occurrence of glendonite, a pseudomorph after the calcium carbonate mineral ikaite, which typically forms in the shallow subsurface of cold marine sediments. The region during the time of Nuwok Member deposition was located at a high latitude, similar to today, and the study site is characterized by sands and silty muds interpreted here to have been deposited in coastal and shelfal marine environments. Isotopic (Sr) and biostratigraphic (foraminifera) evidence presented here refine the depositional age of the outcrop to approximately 24 Ma. Glendonites occur in two basic forms: radial clusters, commonly centered around a single larger primary crystal ( approx. 10 cm; Type A) and larger single blades generally without accessory crystals (approx. 15–25 cm; Type B). Microscopic examination revealed a sequence of multiple types of replacive calcite that formed as a direct result of ikaite transformation: Type 1 rhombohedral crystals characterized by microporous and inclusion-rich cores and concentric zones, Type 2A, composed of clear calcite that overgrew and augmented Type 1 crystals, and inclusion-rich, microcrystalline Type 2B, which formed a matrix surrounding the rhombs and commonly dominates the outer rims of glendonite specimens. Type 3 calcite precipitated as fibrous, botryoidal epitaxial cement atop previous phases and is not ikaite-derived. These phases are distributed in similar ways in all examined specimens and are consistent with several previously described glendonite occurrences around the world, despite differing diagenetic and geologic histories. Stable isotope evidence (δ13C and δ18O) suggests sourcing of glendonite carbon from both organic and methanogenic sources. Glendonites of the Nuwok Member can therefore assist in the determination of a more comprehensive ikaite transformation model, improving our understanding of glendonite formation and the sedimentological and environmental context of their occurrence. Oligocene glendonites are uncommon globally; the well-preserved occurrence described here can allow future studies to better reconstruct Arctic environmental conditions and paleoclimates during this time.

Alaska↗

USGS2025

A partnership between the USGS and the Klamath Tribes to apply structured decision making for chronic wasting disease management

Project Overview: The Klamath Tribes (TKT) are the Klamath, Modoc, and Yahooskin Paiute peoples, and are the first peoples of the land, having lived in ancestral lands of Oregon and California since time immemorial. Members of TKT have rights to hunt, fish, trap, and gather, including the harvest of mule deer ( Odocoileus hemionus ) and elk ( Cervus canadensis nelsoni ) within the 1.19 million acres of their Reserved Treaty Rights Area. Anthropogenic changes threaten the well-being of mule deer and elk and of the Tribes that rely on them. Today, these species are a primary protein source for TKT. They are traded within TKT and among other Tribes and provide materials for cultural and sacred items such as regalia. However, mule deer numbers have been declining across the western states for the past several decades because of multiple stressors, including persistent and frequent drought and wildfires, habitat loss and degradation, vehicle mortality, and increasing barriers to migratory movements between summer and winter ranges. The migratory movements of mule deer, which allow deer to access the best available seasonal habitats, put them at risk of another potential stressor—infection with chronic wasting disease (CWD). Chronic wasting disease is a fatal prion disease of deer that has been detected in 36 U.S. states. It was detected in free-ranging mule deer in northern Idaho in 2021, prompting the Tribes to initiate a planning process for CWD surveillance, prevention, and response measures to preserve and protect the deer and elk within the Reserved Treaty Rights Area. In 2023, the Klamath Tribes Natural Resources Department began to develop their CWD plan by incorporating preliminary input provided by the Klamath Indian Game Commission (KIGC) and working with scientists from the U.S. Geological Survey (USGS). This collaborative effort includes the application of structured decision making and the development of mathematical models to analyze potential CWD management strategies. The result will be a transparent assessment that incorporates TKT values throughout the process and can inform place-based management of the cultural, natural, and physical resources upon which the Tribes depend. In addition, this process may provide opportunities for broader coordination by natural resource management agencies to work together to ensure the long-term health and sustainability of deer and elk populations within the Reserved Treaty Rights Area and throughout the state of Oregon.

Oregon↗

USGS2022

Massachusetts and Landsat

Massachusetts is the seventh smallest U.S. State in land area, but its size is surpassed by its contributions to U.S. history and the economy, its academic and medical expertise, and its natural features. The Atlantic Ocean to the east gives the “Bay State” more than 1,500 miles of coastline that were important in past fishing and maritime trade industries and in the tourism industry of today for destinations such as Boston, Cape Cod, Nantucket, and Martha’s Vineyard. Forests cover roughly 60 percent of the State, which owns 315,000 acres of forests in parklands, reserves, and woodlands. Massachusetts celebrates many strengths, but its strengths can be vulnerable to environmental change. A robust population of 7 million translates to a density of more than 800 people per square mile; in Boston, the density rises to more than 18,000 people per square mile. Urban temperature hotspots can increase health risks to residents. Although the whims of wind and water have long reshaped coastlines, sea-level rise and severe storms can amplify coastal effects. In forests, changes in precipitation can provide more favorable conditions for invasive species. Here are several ways Landsat has benefited the residents of Massachusetts.

Massachusetts↗

USGS1957

Geology of the Basin Quadrangle, Montana

The Basin quadrangle, in the northern part of the Boulder Mountains between Butte and Helena, Montana, is underlain principally by igneous rocks that include Late Cretaceous quartz latitic and andesitic Elkhorn Mountains volcanics, quartz monzonite and related rocks of the Boulder batholith, Oligocene(?) quartz latitic volcanic rocks, and late Miocene(?)-early Pliocene(?) rhyolitic volcanic rocks. Sedimentary rocks of the Late Jurassic Morrison formation, the Early Cretaceous Kootenai formation, and the Early Cretaceous lower part of the Colorado formation, crop out in the northwest part of the quadrangle. The batholithic rocks include early stage quartz monzonite, intermediate or main stage quartz monzonite and granodiorite, and late stage aplite and alaskite. The rocks of the main stage are in discontinuous layers approximately conformable to the folded Elkhorn Mountains volcanics that form the roof of the batholith, and may be part of a sill-like body rather than of a batholith in the classic sense. Metamorphic changes in the roof rocks are not conspicuous except in one stratigraphic unit that probably was especially susceptible to thermal reorganization. The batholithic rocks and Elkhorn Mountains volcanics are jointed, and are cut by faults that trend about east, north, N. 20° E., northeast, and northwest. The east-trending faults are most abundant, especially in the eastern part of the quadrangle, and cut only the batholithic and pre-batholithic rocks, whereas many of the faults of other trends cut Tertiary volcanic rocks and a few cut Pleistocene glacial deposits. A surface of moderate relief was cut before eruption of the Oligocene(?) volcanic rocks, and the late Miocene(?)-early Pliocene(?) volcanic rocks covered a deeply weathered surface of low relief. By the Pleistocene a landscape essentially like that of today had been formed, and during the one period of Pleistocene glaciation, valley glaciers and a mountain ice sheet modified the earlier landforms and left extensive deposits of till and outwash. These deposits have been modified in many places by mass-wasting processes that have dominated post-glacial erosion. Mineral deposits in the quadrangle include deposits of disseminated auriferous pyrite, base- and precious-metal bearing quartz veins that occupy the east-trending fault zones, placer deposits of gold and tin, and a few non-metallic deposits, chiefly stone, gravel, and dumortierite. Nearly all of the metallic minerals mined in the quadrangle have come from the east-trending quartz veins and from the placer deposits.

Montana↗

USGS2009

Sources, transport, and storage of sediment at selected sites in the Chesapeake Bay Watershed

The Chesapeake Bay Watershed covers 165,800 square kilometers and is supplied with water and sediment from five major physiographic provinces: Appalachian Plateau, Blue Ridge, Coastal Plain, Piedmont, and the Valley and Ridge. Suspended-sediment loads measured in the Chesapeake Bay Watershed showed that the Piedmont Physiographic Province has the highest rates of modern (20th Century) sediment yields, measured at U.S. Geological Survey streamflow-gaging stations, and the lowest rates of background or geologic rates of erosion (~10,000 years) measured with in situ beryllium-10. In the agricultural and urbanizing Little Conestoga Creek Watershed, a Piedmont watershed, sources of sediment using the 'sediment-fingerprinting' approach showed that streambanks were the most important source (63 percent), followed by cropland (37 percent). Cesium-137 inventories, which quantify erosion rates over a 40-year period, showed average cropland erosion of 19.39 megagrams per hectare per year in the Little Conestoga Creek Watershed. If this erosion rate is extrapolated to the 13 percent of the watershed that is in cropland, then cropland could contribute almost four times the measured suspended-sediment load transported out of the watershed (27,600 megagrams per hectare per year), indicating that much of the eroded sediment is being deposited in channel and upland storage. The Piedmont has had centuries of land-use change, from forest to agriculture, to suburban and urban areas, and in some areas, back to forest. These land-use changes mobilized a large percentage of sediment that was deposited in upland and channel storage, and behind thousands of mill dams. The effects of these land-use changes on erosion and sediment transport are still being observed today as stored sediment in streambanks is a source of sediment. Cropland is also an important source of sediment. The Coastal Plain Physiographic Province has had the lowest sediment yields in the 20th Century and with sandy soils, contributes little fine-grained sediment. In the agricultural Pocomoke River Watershed, a Coastal Plain watershed, cesium-137 mass-balance results indicate that erosion and deposition are both occurring on cropland fields. Sources of sediment using the sediment-fingerprinting approach for the Pocomoke River were distributed as follows: cropland (46 percent), ditch beds (34 percent), ditch banks and streambanks (7 percent), and forest (13 percent). Cropland was a source of sediment for the two largest peak flow events, which occurred during harvesting when the ground may have been bare. The Pocomoke River Watershed is heavily ditched and channelized, conditions that are favorable for ditch bed and bank erosion. In the mixed land use (forested, agricultural, and urbanizing) Mattawoman Creek Watershed, a Coastal Plain watershed, sources of sediment using the sediment-fingerprinting approach were distributed as follows: streambanks (30 percent), forest (29 percent), construction (25 percent), and cropland (17 percent). Mattawoman Creek Watershed drains a rapidly developing region with 182 hectares (approximately 1.26 percent of the watershed) under construction. Sediment from construction sites was also determined as a source of sediment in the Mattawoman Creek Watershed. The sediment-fingerprinting source results for the three watersheds analyzed, show that in all watersheds, both the stream corridor and agriculture were significant sources of sediment. Forest as a source of sediment in the Mattawoman Creek Watershed may indicate that these forests are being disturbed and forest soils are eroding. Bare ground can be an important sediment source. Spatial analysis of bare ground in the Little Conestoga Creek Watershed using satellite imagery between 2000 and 2005 showed that the majority of bare ground was classified as pasture. Bare ground was correlated to the growing season with the highest percentages occurring in the early spring (April, 34 percent) and a

Chesapeake Bay Watershed↗

USGS1994

Remote sensing and airborne geophysics in the assessment of natural aggregate resources

Natural aggregate made from crushed stone and deposits of sand and gravel is a vital element of the construction industry in the United States. Although natural aggregate is a high volume/low value commodity that is relatively abundant, new sources of aggregate are becoming increasingly difficult to find and develop because of rigid industry specifications, political considerations, development and transporation costs, and environmental concerns, especially in urban growth centers where much of the aggregate is used. As the demand for natural aggregate increases in response to urban growth and the repair and expansion of the national infrastructure, new sources of natural aggregate will be required. The USGS has recognized the necessity of developing the capability to assess the potential for natural aggregate sources on Federal lands; at present, no methodology exists for systematically describing and evaluating potential sources of natural aggregate. Because remote sensing and airborne geophysics can detect surface and nearsurface phenomena, these tools may useful for detecting and mapping potential sources of natural aggregate; however, before a methodology for applying these tools can be developed, it is necessary to understand the type, distribution, physical properties, and characteristics of natural aggregate deposits, as well as the problems that will be encountered in assessing their potential value. There are two primary sources of natural aggregate: (1) exposed or near-surface igneous, metamorphic, and sedimentary bedrock that can be crushed, and (2) deposits of sand and gravel that may be used directly or crushed and sized to meet specifications. In any particular area, the availability of bedrock suitable for crushing is a function of the geologic history of the area - the processes that formed, deformed, eroded and exposed the bedrock. Deposits of sand and gravel are primarily surficial deposits formed by the erosion, transportation by water and ice, and deposition of bedrock fragments. Consequently, most sand and gravel deposits are Tertiary or Quaternary in age and are most common in glaciated areas, alluvial basins, and along rivers and streams. The distribution of potential sources of natural aggregate in the United States is closely tied to physiography and the type of bedrock that occurs in an area. Using these criteria, the United States can be divided into 12 regions: western mountain ranges, alluvial basins, Columbia Plateau, Colorado Plateau and Wyoming basin, High Plains, nonglaciated central region, glaciated central region, Piedmont Blue Ridge region, glaciated northeastern and Superior uplands, Atlantic and Gulf coastal plain, Hawaiian Islands, and Alaska. Each region has similar types of natural aggregate sources within its boundary, although there may be wide variations in specific physical and chemical characteristics of the aggregates within a region. Conventional exploration for natural aggregate deposits has been largely a ground-based operation (field mapping, sampling, trenching and augering, resistivity), although aerial photos and topographic maps have been extensively used to target possible deposits for sampling and testing. Today, the exploration process also considers other factors such as the availability of the land, space and water supply for processing purposes, political and environmental factors, and distance from the market; exploration and planning cannot be separated. There are many physical properties and characteristics by which aggregate material is judged to be acceptable or unacceptable for specific applications; most of these properties and characteristics pertain only to individual aggregate particles and not to the bulk deposit. For example, properties of crushed stone aggregate particles such as thermal volume change, solubility, oxidation and hydration reactivity, and particle strength, among many others, are important consi

Open-File Report↗

USGS2011

Lithosphere-asthenosphere interaction beneath the western United States from the joint inversion of body-wave traveltimes and surface-wave phase velocities

The relation between the complex geological history of the western margin of the North American plate and the processes in the mantle is still not fully documented and understood. Several pre-USArray local seismic studies showed how the characteristics of key geological features such as the Colorado Plateau and the Yellowstone Snake River Plains are linked to their deep mantle structure. Recent body-wave models based on the deployment of the high density, large aperture USArray have provided far more details on the mantle structure while surface-wave tomography (ballistic waves and noise correlations) informs us on the shallow structure. Here we combine constraints from these two data sets to image and study the link between the geology of the western United States, the shallow structure of the Earth and the convective processes in mantle. Our multiphase DNA10-S model provides new constraints on the extent of the Archean lithosphere imaged as a large, deeply rooted fast body that encompasses the stable Great Plains and a large portion of the Northern and Central Rocky Mountains. Widespread slow anomalies are found in the lower crust and upper mantle, suggesting that low-density rocks isostatically sustain part of the high topography of the western United States. The Yellowstone anomaly is imaged as a large slow body rising from the lower mantle, intruding the overlying lithosphere and controlling locally the seismicity and the topography. The large E-W extent of the USArray used in this study allows imaging the 'slab graveyard', a sequence of Farallon fragments aligned with the currently subducting Juan de Fuca Slab, north of the Mendocino Triple Junction. The lithospheric root of the Colorado Plateau has apparently been weakened and partly removed through dripping. The distribution of the slower regions around the Colorado Plateau and other rigid blocks follows closely the trend of Cenozoic volcanic fields and ancient lithospheric sutures, suggesting that the later exert a control on the locus of magmato-tectonic activity today. The DNA velocity models are available for download and slicing at http://dna.berkeley.edu. ?? 2011 The Authors Geophysical Journal International ?? 2011 RAS.

Geophysical Journal International↗