SEARCH · USGS Science

Results for “Geological Society of America Bulletin”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 325 records · Page 18Linked to original sources

USGS1990

Pliocene-Pleistocene growth of the Rio Ebro margin, northeast Spain: A prograding-slope model

Pliocene-Pleistocene marine deposits overlying Messinian evaporites off northeast Spain are composed of five distinct seismic facies. These facies are interpreted to represent deposition in five adjacent settings: distal (isolated) basin, basin plain, base of slope,slope, and shelf. Contrary to previous studies, a submarine-fan style of deposition is not evident. Distal-basin deposits are characterized by thin, wavy, parallel beds draping the sea floor. Basin-plain deposits are similar but also have flat-lying beds and some low-relief channels. Base-of-slope deposits are dominated by stacked, overlapping, elongate channel/levee deposits that have concave-upward bases and convex-upward tops. Slope sequences are thick accumulations of overbank deposits laterally interrupted by large upward-climbing canyon fill. The shelf component is composed of overlapping and stacked delta lobes. The composite sediment body is a prograded, upward-shallowing, offlap sequence initiated and controlled by the influx of terrigenous sediment from the Rio Ebro during the Pleistocene. This style of deposition is common in the rock record, and our model may be more appropriate as a modern analogue for some rocks than are conventional shelf-canyon-fan models of margin sedimentation.

Ebro River, Gulf of Valencia, Mediterranean Sea↗

USGS1990

Remagnetization and northward translation of Mesozoic red chert from Cedros Island and the San Benito Islands, Baja California, Mexico

Samples for paleomagnetic analysis were collected from red radiolarian ribbon chert in a Franciscan-like subduction complex (Western Baja terrane) exposed along the western margin of the Baja California Peninsula. A 40-m-thick section of chert was sampled on Cedros Island, and a 30-m-thick and two smaller sections of chert were sampled on the San Benito Islands to the west. A site in pillow basalt underlying the chert also was sampled on Cedros Island. The sections of chert on Cedros Island and the San Benito Islands contain radiolaria ranging in age from Late Triassic to Early Cretaceous. All of these rocks have similar normal-polarity direction of magnetization, indicating that they were remagnetized long after deposition. Results from a chert site, including an intrastratal fold, also indicate that the magnetization is postdepositional. A significantly improved grouping (95% confidence level) of directions after correction for the structural attitudes of the Cedros and San Benito chert sections, however, implies that the remagnetization predates breaking up and incorporation of the chert into the subduction complex. Studies of modern subduction zones imply that the attitude of the ancient subducting slab, including the chert sections, was near horizontal (dip angles <10° at the time of remagnetization. Thus, assuming paleohorizontality, a paleolatitude of 12° ± 5° N can be estimated for the Western Baja terrane in mid-Cretaceous time. The paleomagnetic directions also indicate a subsequent poleward translation of 25° ± 7° in latitude (2,800 km) and a clockwise rotation of 56° ± 7° of the Western Baja terrane with respect to North America. The paleolatitude error limits at the 95% confidence level represent minimum values, because deviations of the bedding planes from horizontal during remagnetization would contribute to the error. A 10° NE dip of the subducting slab, however, would account for only 4° of the paleolatitude anomaly, and a ≃60° NE dip would be needed to account for the entire anomaly. Modern analogs, in combination with plate-reconstruction models, imply that the northward translation of the Western Baja terrane along the ancient convergent margin of North America could have been accomplished by arc-parallel strike-slip faulting that was driven by oblique subduction.

Baja California↗

USGS1990

Geology and origin of the late Proterozoic Darb Zubaydah ophiolite, Kingdom of Saudi Arabia

The Late Proterozoic (830 ± 20 Ma) Darb Zubaydah ophiolite, north-central Arabian Shield, preserves a largely intact section consisting of ultramafic rocks, gabbro, diabase, granodiorite, and interbedded volcanic and sedimentary rocks. Formation of these rocks within or near an island arc is indicated by the absence of pelagic sediments and the abundance of pillow basalt, turbiditic sediments, lahar deposits, and basaltic to rhyolitic tuff. The oldest extrusive rocks, which range from tholeiites with MORB characteristics to calc-alkaline andesites and rhyolites, formed in a young, relatively un-evolved island are or in a back-arc basin sufficiently close to an arc to receive calc-alkaline lava flows and coarse-grained, arc-derived detritus. tus. Overlying turbidites and lahar deposits of the Kaffan sandstone point to the initiation of a rifting event. High-Ti basalts, which erupted above the Kaffan sandstone, and related diabase are interpreted to be magmatic products of incipient intra-arc rifting. Renewed arc volcanism produced calc-alkaline volcanic rocks that interfingered with the high-Ti basalt and later dominated the section as the volcanic apron of the arc prograded basinward. Extrusion of voluminous calc-alkaline tuff may have been contemporaneous with intrusion of granodiorite and gravity-driven landsliding.

Geological Society of America Bulletin↗

USGS1990

Faults of the central part of the Lewis and Clark line and fragmentation of the Late Cretaceous foreland basin in west-central Montana

The Lewis and Clark line is a prominent zone of strike-slip, dip-slip, and oblique-slip faults that extends from near Wallace, Idaho, to east of Helena, Montana. Faults of this zone have been intermittently active from Middle Proterozoic to Holocene time, and because of numerous tectonic overprints, controversy continues about displacement directions and times of displacement along specific faults. Geologic mapping shows evidence that many principal faults of the Lewis and Clark line, such as the St. Marys-Helena Valley, Bald Butte, Ninemile, and Osburn faults, had right separation or slip that ranged between 28 and 11 km, and this displacement probably occurred during Late Cretaceous time. Other faults, such as the Elevation Mountain, Placer Creek, and Ranch Creek faults, have Late Cretaceous right separations that range between 8 and 3.2 km, and the Mount Sentinel fault zone has between 6.5 and 3 km of right separation of probable Late Cretaceous age. Subsidiary structures of the Lewis and Clark line postdate Paleozoic and Lower Cretaceous rocks and predate Late Cretaceous stocks at some places; subsidiary faults and folds that have age constraints have slip directions compatible with right slip along adjacent, principal faults. Sedimentation patterns of Lower and Upper Cretaceous rocks indicate that faults of the Lewis and Clark line fragmented the foredeep region of the foreland basin into separate northern and southern basins in Late Cretaceous time. The Lower and Upper Cretaceous Blackleaf Formation (Albian and lower Cenomanian) was deposited in a continuous foredeep basin that extended across the Lewis and Clark line from north of the Canadian border to southwestern Montana, a distance of about 450 km. North of the Lewis and Clark line, middle and upper Cenomanian rocks are absent, and a thin sequence of uppermost Cenomanian to Campanian rocks was deposited in a marine environment that changed to a strand-line and continental environment in early Campanian time. South of the Lewis and Clark line, middle and upper Cenomanian deposits are also absent, but a thick sequence of Turonian-to-Campanian rocks was deposited in brackish water and strand-line environments, and during later Campanian time, in a continental environment. In the region between the St. Marys-Helena Valley and Bald Butte faults, a barrier may have formed that served as a local sediment source between foredeep regions in the northern and southern foreland basin during the period 91 to 75 Ma. South of the Bald Butte fault, an extensional tectonic regime contributed to a higher sediment-accumulation rate in the foredeep region along the north border of the southern basin (30 cm/1,000 yr), as compared to lower sediment-accumulation rates (6.9 and 7.8 cm/ 1,000 yr) in the foredeep region of the south part of the northern basin.

Montana↗

USGS1990

The diamicton at Deadman Pass, central Sierra Nevada, California: A residual lag and colluvial deposit, not a 3 Ma glacial till

A diamicton exposed at Deadman Pass in the central Sierra Nevada has been previously described as glacial till and dated at about 3 Ma. If till, the deposit would document an exceptionally old and previously unrecognized glaciation in the Sierra Nevada. The age and glacial origin of the diamicton at Deadman Pass has been widely cited in the geologic literature. Recent work, however, demonstrates that the diamicton is a residual lag and colluvial deposit formed by weathering of poorly consolidated Pliocene pyroclastic rocks that are unusually rich in coarse lithic basement clasts, including granitic and metamorphic rock types. Evidence that the diamicton at Deadman Pass is not till includes the following: (1) distribution of the diamicton is limited to areas underlain by the distinctive clast-rich lower pyroclastic member of the quartz latite of San Joaquin Ridge, (2) clasts in the diamicton and in the lower pyroclastic member are identical, (3) clast lithologies in the diamicton reflect nearby sources, (4) glacial deposits are absent in well-exposed sections of the lower pyroclastic member, and (5) formation of diamicton from present-day weathering and mass wasting of outcrops of the lower pyroclastic member can be observed locally.

California↗

USGS1990

Ancient channels of the Susquehanna River beneath Chesapeake Bay and the Delmarva Peninsula

The trunk channels of each system are 2 to 4 km wide and are incised 30 to 50 m into underlying strata; they have irregular longitudinal profiles and very low gradients within the Chesapeake Bay area. The youngest paleochannel is clearly of late Wisconsinan age, about 18 ka, and the intermediate one appears to be late Illinoian in age, or about 150 ka. The age of the oldest is in the range of about 200 to 400 ka. The three paleochannel systems imply a dynamic coastal-plain environment and at least two previous generations of the Chesapeake Bay. -from Authors

Chesapeake Bay, Delmarva Peninsula, Susquehanna Ri↗

USGS1990

Molluscan evidence for early middle Miocene marine glaciation in southern Alaska

Profound cooling of Miocene marine climates in southern Alaska culminated in early middle Miocene coastal marine glaciation in the northeastern Gulf of Alaska. This climatic change resulted from interaction of the Yakutat terrane with southern Alaska beginning in late Oligocene time. The ensuing extreme uplift of the coastal Chugach and St. Elias Mountains resulted in progressive regional cooling that culminated in coastal marine glaciation beginning in the early middle Miocene (15-16 Ma) and continuing to the present. The counterclockwise flow of surface water from the frigid northeastern Gulf of Alaska resulted in a cold-temperate shallow-marine environment in the western Gulf of Alaska, as it does today. Ironically, dating of Gulf of Alaska marine glaciation as early middle Miocene is strongly reinforced by the presence of a few tropical and subtropical mollusks in western Gulf of Alaska faunas. Shallow-marine waters throughout the Gulf of Alaska were cold-temperate to cold in the early middle Miocene, when the world ocean was undergoing peak Neogene warming.

Alaska↗

USGS1990

Ages and stable-isotope compositions of secondary calcite and opal in drill cores from Tertiary volcanic rocks of the Yucca Mountain area, Nevada

Stable-isotope compositions of fracture-and cavity-filling calcite from the unsaturated zone of three drill cores at Yucca Mountain Tertiary volcanic complex indicate that the water from which the minerals precipitated was probably meteoric in origin. A decrease in 18 O in the calcite with depth is interpreted as being due to the increase in temperature in drill holes corresponding to an estimated average geothermal gradient of 34° per kilometer. A few of the calcite samples and all of the opal samples yielded uranium-series ages older than 400,000 yr, although most of the calcite samples yielded ages between 26,000 and 310,000 yr. The stable-isotope and uranium- series dates from precipitated calcite and opal of this reconnaissance study suggest a complex history of fluid movement through the volcanic pile, and episodes of fracture filling predominantly from meteoric water during at least the past 400,000 yr.

Nevada↗

USGS1991

The neotectonic setting of Puerto Rico

The island of Puerto Rico, in the northeast Caribbean, lies within a broad deformation zone between the Caribbean and North American plates. The simplest model for the tectonic setting of Puerto Rico has major strike-slip movement on nearly east-west lines in the vicinity of the Puerto Rico Trench coupled to a small counterclockwise rotation of a Puerto Rico block within the broader plate boundary zone. This simple model is attractive because it predicts the tectonic regime south of Puerto Rico, and provides an explanation for a possible component of extension across the Puerto Rico Trench west of 65.5°W. GLORIA long-range sidescan sonar data and seismic reflection profiles have been used to test this model by mapping the major tectonic features across the plate boundary north and south of Puerto Rico. To the north, the new data help to resolve between conflicting models, of underthrusting or strike-slip motion at the Puerto Rico Trench. No direct evidence of compression is seen, although evidence for normal and strike-slip movement is abundant. This, combined with regional considerations, leads us to conclude that the main east-west-trending part of the Puerto Rico Trench between 65.5°W and 68°W lies within a strike-slip regime, although oblique convergence occurs both to the east and west where the plate boundary trends east-southeast. To the south of Puerto Rico, underthrusting of the Caribbean plate beneath the island decreases from west to east, and it is ultimately replaced by extension in the Virgin Islands Basin east of 65°W.

Puerto Rico↗

USGS1991

Jurassic Lake T'oo'dichi': A large alkaline, saline lake, Morrison Formation, eastern Colorado Plateau

A large alkaline, saline lake, Lake T'oo'dichi', occupied the entire eastern part of the Colorado Plateau region during deposition of the Brushy Basin Member of the Upper Jurassic Morrison Formation. The lake extended from near the site of Albuquerque, New Mexico, to near the site of Grand Junction, Colorado, and occupied a region that encompassed the San Juan and ancestral Paradox basins, making it the largest ancient alkaline, saline lake known.

Geological Society of America Bulletin↗

USGS1991

Anomalous folds associated with the east-central part of the Garlock Fault, southeast California

The east-central part of the left-lateral Garlock fault, in southeast California, is associated with three broad folds that trend and plunge northeast. The folds, which lie north, south, and astride the fault, postdate deposition of alluvial gravels that at one time formed a continuous northwest-sloping fan; the gravels rest conformably on lake beds that contain the Lava Creek B ash bed (0.62 Ma). The anticline, named after Christmas Canyon, has vertical relief of as much as 100 m. Topographic profiles suggest that the gravels exposed along the synclinal troughs to its southeast (Pilot Knob Valley syncline) and northwest (Teagle Wash syncline) lie at about the same elevations as they did when part of the originally active fan, implying that the synclines are passive results of the anticline development. If so, the original slope of the middle Pleistocene alluvial sediment sheet was about 0.6° northwest. The age and dimensional controls allow calculation of the rates of tilting and horizontal shortening. Corrected tilting rates vary from about 2.5° to 4.7°/m.y.; the total shortening of about 7.5 m developed at a minimum rate of 12.5 m/m.y.

California↗

USGS1991

Comparative geometry of the San Andreas Fault, California, and laboratory fault zones

Textural examination of fault gouge deformed in triaxial friction experiments has revealed differences in the orientations of secondary shear sets between the stably sliding and stick-slip samples. In order to determine whether such differences can be identified in natural faults, maps of recently active breaks along the San Andreas fault from Point Arena to Cajon Pass, California, were examined to compare the types and orientations of secondary structures mapped in the creeping and locked sections. The fault zone was divided into 52 geometrically defined segments of uniform strike, which were then grouped into 7 sections: 4 straight and 2 curved sections, and Cholame Valley. One of the straight sections is the creeping section between San Juan Bautista and Cholame in central California; the rest of the sections are locked. Many of the gross geometric characteristics of the individual segments, such as length, width, and stepover size, reflect their position in either a straight or a curved section. In contrast, with respect to the orientations of the recent breaks within the segments, the single creeping section differs from all of the locked sections, both straight and curved, as follows: (1) the traces of recent breaks with a more west-ward orientation than the local strike of the fault zone (P traces) dominate over those with a more northward orientation (R traces) in the creeping section, whereas the opposite relationship holds in the locked sections, and (2) the more northward-oriented (R) traces make larger angles to the local strike of the fault zone in the locked sections than in the creeping section. The latter result is consistent with the orientations of R shears in our various laboratory samples. The former result was unexpected, because of the predominance of R shears in most laboratory samples, but a small number of samples are analogous to the creeping section in terms of their P-shear abundances, R-shear orientations, and sliding behavior. The causes of these distinguishing characteristics are not yet understood.

California↗

USGS1991

Regional study of mineral resources in Nevada: Insights from three-dimensional analysis of gravity and magnetic anomalies

A three-dimensional interpretation of the basins of Nevada was developed based on statewide data bases of digital-gravity, magnetic, geologic, well, and topographic information. An iterative technique was applied to isostatic residual gravity anomalies in Nevada in order to define the location and shape of pre-Tertiary basement and to produce a gravity map that reflects variations of density within the pre-Tertiary basement. The dominant feature of the basement gravity of Nevada is an enormous area of low gravity that spans the entire state between latitudes 37°N and 40.5°N. This regional low strongly correlates with the distribution of middle and late Tertiary volcanic rocks and may reflect silicic intrusions within the mid-crust and upper crust that are the counterparts of volcanic rocks at the surface. Although 80% of Nevada is covered by Cenozoic deposits, these deposits are thicker than 1 km over only about 20% of the state. The remaining 60% of Nevada may have pre-Tertiary basement rocks within reach of current mineral-exploration techniques. Aeromagnetic profiles from the National Uranium Resource Evaluation (NURE) were analyzed in order to produce a map showing the location of shallow magnetic sources in Nevada. This analysis shows that 46% of the state has magnetic sources, generally Mesozoic and Cenozoic igneous rocks, within 1 km of the surface. A linear magnetic anomaly in north-central Nevada has been interpreted by others as a rift zone active during middle Miocene time. The rift also is evident in NURE magnetic profiles, but our interpretation suggests that the magnetic expression of the rift continues south-southeast with similar strike to at least 38°N and perhaps to the amagmatic zone (lat. 37°N). The survival since the middle Miocene of this narrow crustal feature, essentially linear over a distance of 500 km, is difficult to interpret in light of later Basin and Range deformation. Our analysis of gravity anomalies shows that many deep Cenozoic basins are located near the rift, yet only two basins cut across it, and at least five others change strike near the rift, as if to avoid it. The rift may have remained linear because it is associated with crustal structures that acted to resist subsequent deformation.

Nevada↗

USGS1991

Submarine processes of the middle Atlantic continental rise based on GLORIA imagery

Approximately 6100 km of 3.5-kHz echo-sounding profiles was correlated with a GLORIA side-scan sonar image of the mid-Atlantic United States (34??N, 70??W) lower slope-upper continental rise. The image allows us to map the major erosional and depositional features and to identify major processes that have shaped the area. Interpretation of GLORIA imagery and echo-sounding profiles indicates that mass movement is the predominant process affecting sediment on the United States east coast mid-Atlantic slope and upper rise and that isobath-parallel sediment movement by geostrophic currents is restricted mainly to the lower continental rise. The mass-movement processes evident on the rise probably were most active during the Pleistocene, when sea level was lower and sediment input more active. -from Authors

Geological Society of America Bulletin↗

USGS1991

Conditions leading to a recent small hydrothermal explosion at Yellowstone National Park

Porkchop Geyser, in Yellowstone National Park, was the site of a small hydrothermal explosion on September 5, 1989. In the early 1960s, this was a quiescent spring with an intermittent seeping discharge. Infrequent geyser eruptions 3-5 m high started in 1971, and in 1985 the geyser began erupting as a perpetual spouter 6-9 m high. Perpetual spouting at the latter height continued until just before the catastrophic hydrothermal event when the geyser column suddenly rose to a height of 20-30 m, followed immediately by the explosive ejection of sinter blocks up to 1.88 m in maximum dimension and formation of an irregular crater 13.9 m long and 11.7 m wide. The ejected blocks show a variety of siliceous deposits indicative of changing environments of deposition with time, and possibly of prior hydrothermal explosive activity at this site. Water samples from Porkchop were collected and analyzed once in the 1920s, again in 1951, ten times between 1960 and mid-1989, and once in January 1990 after the explosion. Chemical geothermometry shows an increase in the temperature of last water-rock equilibration of about 60 to 70 °C from 1962 through 1989. This may have been the result of drawing water progressively from different and hotter regions of a single reservoir or mixing waters from two different reservoirs with a progressively larger proportion of water being drawn from the hotter reservoir from 1962 through 1989. Boiling of ascending fluids coming from hotter subsurface regions resulted in an increase in the proportion of steam to water discharged by the geyser. A constriction at the exit of the geyser tube throttled the flow of water and steam and allowed water in shallow cavities adjacent to the geyser tube to become heated to the boiling point at pressures greater than normal hydrostatic. We hypothesize that a sudden breaking loose of this constriction, likely triggered by a seasonal increase in subsurface boiling throughout Norris Basin, allowed water and steam to be discharged from Porkchop much more rapidly than previously. This resulted in a drop in pressure within the geyser tube, causing water in adjacent connected chambers to become superheated. An ensuing rapid flashing of superheated water to steam within relatively confined spaces resulted in the hydrothermal explosion.

Wyoming↗

USGS1991

Use of longitudinal strain in identifying driving and resisting elements of landslides

Observations of deformation at the surfaces of landslides in Utah and Hawaii indicate that the upslope parts of the land-slides have stretched and the downslope parts have shortened parallel with the direction of movement. The maximum displacement of each landslide occurs in a relatively undeformed zone between the zones of shortening and stretching. The pattern of deformation at the surface of these landslides may be useful in analyzing their mechanics by helping to constrain the longitudinal forces in limit-equilibrium stability analysis. We used earth-pressure calculations to determine the range of possible longitudinal forces (per unit width) for active failure in the zone of stretching and for passive failure in the zone of shortening of one of the Hawaiian landslides. Longitudinal forces computed by stability analysis, assuming homogeneous strength, exceeded the possible forces in much of the upslope half of the landslide. Consequently, we assumed inhomogeneous strength and adjusted shear-strength parameters at each segment of the slip surface until the longitudinal forces computed by stability analysis agreed with those computed by earth-pressure theory, and the factor of safety approached unity. The distribution of longitudinal forces computed for inhomogeneous strength indicated that the boundary between driving and resisting elements of the landslide is near the thickest part of the slide, in agreement with a simple formula for the location of the boundary.

Geological Society of America Bulletin↗

USGS1991

Heart Mountain, Wyoming, detachment lineations: Are they in microbreccia or in volcanic tuff?

The concept of tectonic denudation followed by deposition of lower middle Eocene Wapiti Formation volcanic rocks on the exposed Heart Mountain detachment has been challenged by Hauge. His "extending allochthon" interpretation requires that the Wapiti Formation be fault emplaced and that lineations in a volcanic tuff overlying the fault north of Jim Smith Peak be fault striae in "microbreccia." Our re-examination of the field evidence in minute detail indicates that these lineations were produced by flowage of volcanic rocks on a thin layer of air-fall tuff. The following lines of evidence indicate that this tuff was deposited on the detachment surface during the brief interval that the denuded surface was exposed. (1) Field relations indicate that the Wapiti volcanic rocks are younger than the detachment, and so they could not have been fault emplaced. (2) Lineations occur only on the upper surface of Wapiti Formation tuff; none were found at the contact of the tuff with the detachment surface. (3) The reported direction of translation indicated by the lineations is not consistent. Many lineations in the tuff indicate north and northeast movement—a direction that is consistent with lineations produced by lava flowing from a known vent but inconsistent with a southeast direction of detachment movement. (4) The lineations are restricted to the northwestern part of the area covered by the Wapiti Formation, which is also consistent with their derivation as volcanic flow lineations from a known vent. If the Wapiti had been tectonically emplaced, fault striae should occur elsewhere on the detachment surface, but none have been observed. (5) The lower contact of the tuff with the detachment surface, as seen in thin sections, is irregular, suggesting that it is a depositional rather than a fault contact. (6) The contact between the tuff and overlying Wapiti, as seen in thin sections, is also irregular, as would be expected if the Wapiti volcanic breccia had been deposited on the tuff. Thin sections of the "microbreccia" suggest that it is a sedimentary rock, not a "fault rock." (7) A remnant of the tectonic carpet of all-carbonate fault breccia lying on the detachment surface, unmixed with the overlying Wapiti volcanic rock, is compatible with the depositional emplacement of the Wapiti but is not compatible with Wapiti Formation being moved many kilometers across the carpet of all-carbonate fault breccia and not removing or becoming mixed with it.

Wyoming↗

USGS1991

Jurassic normal and strike-slip faults at Crater Island, northwestern Utah

At Crater Island, northern Silver Island Mountains, northwestern Utah, an unbroken Tertiary fault block within the Basin and Range province exhibits Jurassic or older structures that are virtually unmodified by subsequent tectonism, providing an opportunity to examine the tectonics of the Jurassic back arc of the Cordillera. Widespread high-angle faults, mainly striking north and northeast, offset the moderately west-dipping strata down to the west, thereby extending the strata parallel to bedding by 10% to 20%. These faults apparently belong to a single kinematic event of west-northwest oriented extension subparallel to bedding. The normal faults merge with a north-northwest dextral strike-slip fault system. The two fault systems are kinematically compatible, suggesting that they may have been contemporaneous. A low-angle (thrust?) fault nearly parallel to bedding within Ordovician strata is cut by the high-angle faults. Intrusive relations with about 160 Ma granitoid rocks show that all of these faults are Late Jurassic or older, with a reasonable lower age limit of Early Jurassic established on the basis of paleogeographic reconstructions using sedimentary deposits in the region. Jurassic dikes indicate a minimum horizontal compression direction that is parallel to the extension direction indicated by the normal faults, thus supporting the inference that normal and strike-slip faulting took place during the late Middle or early Late Jurassic. We interpret these data to indicate that minor thrusting, probably during the Jurassic, was followed by extensional faulting within a strike-slip fault system, probably close in time to intrusion. These relations are similar to those reported previously in the nearby Newfoundland Mountains. Other mountains of northern Utah and adjacent Nevada also have examples of Jurassic normal faults that contrast with the more generally observed thrust faults and tectonite fabrics. These data point to a possible regional extensional tectonic event affecting the crust far inland of the Jurassic magmatic arc, an event probably associated with back-arc magmatism.

Utah↗