USGS Science⌕ Search

SEARCH · USGS Science

Results for “Exploration Geophysics”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 325 records · Page 18Linked to original sources
USGS2012

Permissive tracts for algoma-, superior-, and oolitic-type iron deposits in Mauritania (phase V, deliverable 82): Chapter O1 in Second projet de renforcement institutionnel du secteur minier de la République Islamique de Mauritanie (PRISM-II)

In 1996, at the request of the Government of the Islamic Republic of Mauritania, a team of U.S. Geological Survey (USGS) scientists produced a strategic plan for the acquisition, improvement and modernization of multidisciplinary sets of data to support the growth of the Mauritanian minerals sector and to highlight the geological and mineral exploration potential of the country. In 1999, the Ministry of Petroleum, Energy, and Mines of the Islamic Republic of Mauritania implemented a program for the acquisition of the recommended basic geoscientific information, termed the first Projet de Renforcement Institutionnel du Secteur Minier (Project for Institutional Capacity Building in the Mining Sector, PRISM-I). As a result of the PRISM-I efforts, a great deal of new geological, geophysical, geochemical, remote sensing, and hydrological data became available for evaluation and synthesis. However, the Ministry of Petroleum, Energy, and Mines recognized that additional work was required to extract the full benefit of the data before it could be of greatest use to the international community and of benefit to the Mauritanian minerals and development sector. To achieve this benefit, the Ministry of Petroleum, Energy, and Mines implemented a second Projet de Renforcement Institutionnel du Secteur Minier (PRISM-II) in 2006 to consolidate, synthesize, and interpret all of the existing data, create a new 1:1,000,000 scale geologic map, and define the mineral resource potential of the country. A consortium in which the USGS was the lead scientific agency carried out the majority of the PRISM-II work. In 2008, the USGS Mauritania Minerals Project was interrupted due to political changes in Mauritania. PRISM-II work resumed in 2011, and was completed in 2013 with the delivery of over 40 separate written reports and plates, an access file containing the Mauritanian National Mineral Deposits Database, and an interactive GIS containing all of the multi-disciplinary data and interpretive areas of mineral resource potential in Mauritania. This report contains the USGS results of the PRISM-II Mauritania Minerals Project and is presented in cooperation with the Ministry of Petroleum, Energy, and Mines of the Islamic Republic of Mauritania. The Report is composed of separate chapters consisting of multidisciplinary interpretive reports with accompanying plates on the geology, structure, geochronology, geophysics, hydrogeology, geochemistry, remote sensing (Landsat TM and ASTER), and SRTM and ASTER digital elevation models of Mauritania. The syntheses of these multidisciplinary data formed the basis for additional chapters containing interpretive reports on 12 different commodities and deposit types known to occur in Mauritania, accompanied by countrywide mineral resource potential maps of each commodity/deposit type. The commodities and deposit types represented include: (1) Ni, Cu, PGE, and Cr deposits hosted in ultramafic rocks; (2) orogenic, Carlin-like, and epithermal gold deposits; (3) polymetallic Pb-Zn-Cu vein deposits; (4) sediment-hosted Pb-Zn-Ag deposits of the SEDEX and Mississippi Valley-type; (5) sediment-hosted copper deposits; ( 6) volcanogenic massive sulfide deposits; (7) iron oxide copper-gold deposits; (8) uranium deposits; (9) Algoma-, Superior-, and oolitic-type iron deposits; (10) shoreline Ti-Zr placer deposits; (11) incompatible element deposits hosted in pegmatites, alkaline rocks, and carbonatites, and; (12) industrial mineral deposits. Additional chapters include the Mauritanian National Mineral Deposits Database are accompanied by an explanatory text and the Mauritania Minerals Project GIS that contains all of the interpretive layers created by USGS scientists. Raw data not in the public domain may be obtained from the Ministry of Petroleum, Energy, and Mines in Nouakchott, Mauritania.

Open-File Report↗
USGS2012

Permissive tracts for shoreline placer titanium deposits in Mauritania (phase V, deliverable 84): Chapter P1 in Second projet de renforcement institutionnel du secteur minier de la République Islamique de Mauritanie (PRISM-II)

In 1996, at the request of the Government of the Islamic Republic of Mauritania, a team of U.S. Geological Survey (USGS) scientists produced a strategic plan for the acquisition, improvement and modernization of multidisciplinary sets of data to support the growth of the Mauritanian minerals sector and to highlight the geological and mineral exploration potential of the country. In 1999, the Ministry of Petroleum, Energy, and Mines of the Islamic Republic of Mauritania implemented a program for the acquisition of the recommended basic geoscientific information, termed the first Projet de Renforcement Institutionnel du Secteur Minier (Project for Institutional Capacity Building in the Mining Sector, PRISM-I). As a result of the PRISM-I efforts, a great deal of new geological, geophysical, geochemical, remote sensing, and hydrological data became available for evaluation and synthesis. However, the Ministry of Petroleum, Energy, and Mines recognized that additional work was required to extract the full benefit of the data before it could be of greatest use to the international community and of benefit to the Mauritanian minerals and development sector. To achieve this benefit, the Ministry of Petroleum, Energy, and Mines implemented a second Projet de Renforcement Institutionnel du Secteur Minier (PRISM-II) in 2006 to consolidate, synthesize, and interpret all of the existing data, create a new 1:1,000,000 scale geologic map, and define the mineral resource potential of the country. A consortium in which the USGS was the lead scientific agency carried out the majority of the PRISM-II work. In 2008, the USGS Mauritania Minerals Project was interrupted due to political changes in Mauritania. PRISM-II work resumed in 2011, and was completed in 2013 with the delivery of over 40 separate written reports and plates, an access file containing the Mauritanian National Mineral Deposits Database, and an interactive GIS containing all of the multi-disciplinary data and interpretive areas of mineral resource potential in Mauritania. This report contains the USGS results of the PRISM-II Mauritania Minerals Project and is presented in cooperation with the Ministry of Petroleum, Energy, and Mines of the Islamic Republic of Mauritania. The Report is composed of separate chapters consisting of multidisciplinary interpretive reports with accompanying plates on the geology, structure, geochronology, geophysics, hydrogeology, geochemistry, remote sensing (Landsat TM and ASTER), and SRTM and ASTER digital elevation models of Mauritania. The syntheses of these multidisciplinary data formed the basis for additional chapters containing interpretive reports on 12 different commodities and deposit types known to occur in Mauritania, accompanied by countrywide mineral resource potential maps of each commodity/deposit type. The commodities and deposit types represented include: (1) Ni, Cu, PGE, and Cr deposits hosted in ultramafic rocks; (2) orogenic, Carlin-like, and epithermal gold deposits; (3) polymetallic Pb-Zn-Cu vein deposits; (4) sediment-hosted Pb-Zn-Ag deposits of the SEDEX and Mississippi Valley-type; (5) sediment-hosted copper deposits; ( 6) volcanogenic massive sulfide deposits; (7) iron oxide copper-gold deposits; (8) uranium deposits; (9) Algoma-, Superior-, and oolitic-type iron deposits; (10) shoreline Ti-Zr placer deposits; (11) incompatible element deposits hosted in pegmatites, alkaline rocks, and carbonatites, and; (12) industrial mineral deposits. Additional chapters include the Mauritanian National Mineral Deposits Database are accompanied by an explanatory text and the Mauritania Minerals Project GIS that contains all of the interpretive layers created by USGS scientists. Raw data not in the public domain may be obtained from the Ministry of Petroleum, Energy, and Mines in Nouakchott, Mauritania.

Open-File Report↗
USGS2012

Permissive tracts for incompatible element deposits hosted in pegmatities, alkaline rocks, and carbonatities in Mauritania (phase V, deliverable 86), Chapter Q1 in Second projet de renforcement institutionnel du secteur minier de la République Islamique de Mauritanie (PRISM-II)

In 1996, at the request of the Government of the Islamic Republic of Mauritania, a team of U.S. Geological Survey (USGS) scientists produced a strategic plan for the acquisition, improvement and modernization of multidisciplinary sets of data to support the growth of the Mauritanian minerals sector and to highlight the geological and mineral exploration potential of the country. In 1999, the Ministry of Petroleum, Energy, and Mines of the Islamic Republic of Mauritania implemented a program for the acquisition of the recommended basic geoscientific information, termed the first Projet de Renforcement Institutionnel du Secteur Minier (Project for Institutional Capacity Building in the Mining Sector, PRISM-I). As a result of the PRISM-I efforts, a great deal of new geological, geophysical, geochemical, remote sensing, and hydrological data became available for evaluation and synthesis. However, the Ministry of Petroleum, Energy, and Mines recognized that additional work was required to extract the full benefit of the data before it could be of greatest use to the international community and of benefit to the Mauritanian minerals and development sector. To achieve this benefit, the Ministry of Petroleum, Energy, and Mines implemented a second Projet de Renforcement Institutionnel du Secteur Minier (PRISM-II) in 2006 to consolidate, synthesize, and interpret all of the existing data, create a new 1:1,000,000 scale geologic map, and define the mineral resource potential of the country. A consortium in which the USGS was the lead scientific agency carried out the majority of the PRISM-II work. In 2008, the USGS Mauritania Minerals Project was interrupted due to political changes in Mauritania. PRISM-II work resumed in 2011, and was completed in 2013 with the delivery of over 40 separate written reports and plates, an access file containing the Mauritanian National Mineral Deposits Database, and an interactive GIS containing all of the multi-disciplinary data and interpretive areas of mineral resource potential in Mauritania. This report contains the USGS results of the PRISM-II Mauritania Minerals Project and is presented in cooperation with the Ministry of Petroleum, Energy, and Mines of the Islamic Republic of Mauritania. The Report is composed of separate chapters consisting of multidisciplinary interpretive reports with accompanying plates on the geology, structure, geochronology, geophysics, hydrogeology, geochemistry, remote sensing (Landsat TM and ASTER), and SRTM and ASTER digital elevation models of Mauritania. The syntheses of these multidisciplinary data formed the basis for additional chapters containing interpretive reports on 12 different commodities and deposit types known to occur in Mauritania, accompanied by countrywide mineral resource potential maps of each commodity/deposit type. The commodities and deposit types represented include: (1) Ni, Cu, PGE, and Cr deposits hosted in ultramafic rocks; (2) orogenic, Carlin-like, and epithermal gold deposits; (3) polymetallic Pb-Zn-Cu vein deposits; (4) sediment-hosted Pb-Zn-Ag deposits of the SEDEX and Mississippi Valley-type; (5) sediment-hosted copper deposits; ( 6) volcanogenic massive sulfide deposits; (7) iron oxide copper-gold deposits; (8) uranium deposits; (9) Algoma-, Superior-, and oolitic-type iron deposits; (10) shoreline Ti-Zr placer deposits; (11) incompatible element deposits hosted in pegmatites, alkaline rocks, and carbonatites, and; (12) industrial mineral deposits. Additional chapters include the Mauritanian National Mineral Deposits Database are accompanied by an explanatory text and the Mauritania Minerals Project GIS that contains all of the interpretive layers created by USGS scientists. Raw data not in the public domain may be obtained from the Ministry of Petroleum, Energy, and Mines in Nouakchott, Mauritania.

Open-File Report↗
USGS2012

Reported industrial minerals occurrences and permissive areas for other occurrences in the Islamic Republic of Mauritania (phase V deliverable 88): Chapter R1 in Second projet de renforcement institutionnel du secteur minier de la République Islamique de Mauritanie (PRISM-II)

In 1996, at the request of the Government of the Islamic Republic of Mauritania, a team of U.S. Geological Survey (USGS) scientists produced a strategic plan for the acquisition, improvement and modernization of multidisciplinary sets of data to support the growth of the Mauritanian minerals sector and to highlight the geological and mineral exploration potential of the country. In 1999, the Ministry of Petroleum, Energy, and Mines of the Islamic Republic of Mauritania implemented a program for the acquisition of the recommended basic geoscientific information, termed the first Projet de Renforcement Institutionnel du Secteur Minier (Project for Institutional Capacity Building in the Mining Sector, PRISM-I). As a result of the PRISM-I efforts, a great deal of new geological, geophysical, geochemical, remote sensing, and hydrological data became available for evaluation and synthesis. However, the Ministry of Petroleum, Energy, and Mines recognized that additional work was required to extract the full benefit of the data before it could be of greatest use to the international community and of benefit to the Mauritanian minerals and development sector. To achieve this benefit, the Ministry of Petroleum, Energy, and Mines implemented a second Projet de Renforcement Institutionnel du Secteur Minier (PRISM-II) in 2006 to consolidate, synthesize, and interpret all of the existing data, create a new 1:1,000,000 scale geologic map, and define the mineral resource potential of the country. A consortium in which the USGS was the lead scientific agency carried out the majority of the PRISM-II work. In 2008, the USGS Mauritania Minerals Project was interrupted due to political changes in Mauritania. PRISM-II work resumed in 2011, and was completed in 2013 with the delivery of over 40 separate written reports and plates, an access file containing the Mauritanian National Mineral Deposits Database, and an interactive GIS containing all of the multi-disciplinary data and interpretive areas of mineral resource potential in Mauritania. This report contains the USGS results of the PRISM-II Mauritania Minerals Project and is presented in cooperation with the Ministry of Petroleum, Energy, and Mines of the Islamic Republic of Mauritania. The Report is composed of separate chapters consisting of multidisciplinary interpretive reports with accompanying plates on the geology, structure, geochronology, geophysics, hydrogeology, geochemistry, remote sensing (Landsat TM and ASTER), and SRTM and ASTER digital elevation models of Mauritania. The syntheses of these multidisciplinary data formed the basis for additional chapters containing interpretive reports on 12 different commodities and deposit types known to occur in Mauritania, accompanied by countrywide mineral resource potential maps of each commodity/deposit type. The commodities and deposit types represented include: (1) Ni, Cu, PGE, and Cr deposits hosted in ultramafic rocks; (2) orogenic, Carlin-like, and epithermal gold deposits; (3) polymetallic Pb-Zn-Cu vein deposits; (4) sediment-hosted Pb-Zn-Ag deposits of the SEDEX and Mississippi Valley-type; (5) sediment-hosted copper deposits; ( 6) volcanogenic massive sulfide deposits; (7) iron oxide copper-gold deposits; (8) uranium deposits; (9) Algoma-, Superior-, and oolitic-type iron deposits; (10) shoreline Ti-Zr placer deposits; (11) incompatible element deposits hosted in pegmatites, alkaline rocks, and carbonatites, and; (12) industrial mineral deposits. Additional chapters include the Mauritanian National Mineral Deposits Database are accompanied by an explanatory text and the Mauritania Minerals Project GIS that contains all of the interpretive layers created by USGS scientists. Raw data not in the public domain may be obtained from the Ministry of Petroleum, Energy, and Mines in Nouakchott, Mauritania.

Open-File Report↗
USGS2003

Archive of chirp seismic reflection data collected during USGS cruises 01SCC01 and 01SCC02, Timbalier Bay and offshore East Timbalier Island, Louisiana, June 30 - July 9 and August 1 - 12, 2001

In June, July, and August of 2001, the U.S. Geological Survey (USGS), in cooperation with the University of New Orleans, the U.S. Army Corps of Engineers, and the Louisiana Department of Natural Resources, conducted a shallow geophysical and sediment core survey of Timbalier Bay and the Gulf of Mexico offshore East Timbalier Island, Louisiana. This report serves as an archive of unprocessed digital seismic reflection data, trackline navigation files, trackline navigation maps, observers' logbooks, Geographic Information Systems (GIS) information, and formal Federal Geographic Data Committee (FGDC) metadata. In addition, a gained digital Graphics Interchange Format (GIF) image of each seismic profile is provided. Please see Kulp and others (2002), Flocks and others (2003), and Kulp and others (in prep.) for further information about the sediment cores collected and the geophysical results. For convenience, a list of acronyms and abbreviations frequently used in this report is also included. This Digital Versatile Disc (DVD) document is readable on any computing platform that has standard DVD driver software installed. Documentation on this DVD was produced using Hyper Text Markup Language (HTML) utilized by the World Wide Web (WWW) and allows the user to access the information using a web browser (i.e. Netscape, Internet Explorer). To access the information contained on these discs, open the file 'index.htm' located at the top level of each disc using a web browser. This report also contains WWW links to USGS collaborators and other agencies. These links are only accessible if access to the internet is available while viewing these DVDs. The archived chirp seismic reflection data are in standard Society of Exploration Geophysicists (SEG) SEG-Y format (Barry et al., 1975) and may be downloaded for processing with public domain software such as Seismic Unix (SU), currently located at http://www.cwp.mines.edu/cwpcodes/index.html. Examples of SU processing scripts are provided in the CHIRP.tar file located in the SU subfolder of the SOFTWARE folder located at the top level of each disc. In-house (USGS) DOS and Microsoft Windows compatible software for viewing SEG-Y headers - DUMPSEGY.EXE (Zihlman, 1992) - is provided in the USGS subfolder of the SOFTWARE folder. Processed profile images, trackline navigation maps, logbooks, and formal metadata may be viewed with a web browser.

Louisiana↗
USGS2003

Archive of boomer seismic reflection data collected during USGS cruises 01SCC01 and 01SCC02, Timbalier Bay and offshore East Timbalier Island, Louisiana, June - August, 2001

In June, July, and August of 2001, the U.S. Geological Survey (USGS), in cooperation with the University of New Orleans (UNO), the U.S. Army Corps of Engineers, and the Louisiana Department of Natural Resources, conducted a shallow geophysical and sediment core survey of Timbalier Bay and the Gulf of Mexico offshore East Timbalier Island, Louisiana. This report serves as an archive of unprocessed digital seismic reflection data, trackline navigation files, trackline navigation maps, observers' logbooks, Geographic Information Systems (GIS) information, and formal Federal Geographic Data Committee (FGDC) metadata. In addition, a filtered and gained digital Graphics Interchange Format (GIF) image of each seismic profile is provided. Please see Kulp and others (2002), Flocks and others (2003), and Kulp and others (in prep.) for further information about the sediment cores collected and the geophysical results. For convenience, a list of acronyms and abbreviations frequently used in this report is also included. This Digital Versatile Disc (DVD) document is readable on any computing platform that has standard DVD driver software installed. Documentation on this DVD was produced using Hyper Text Markup Language (HTML) utilized by the World Wide Web (WWW) and allows the user to access the information using a web browser (i.e. Netscape, Internet Explorer). To access the information contained on this disc, open the file 'index.htm' located at the top level of the disc using a web browser. This report also contains WWW links to USGS collaborators and other agencies. These links are only accessible if access to the Internet is available while viewing this DVD. The archived boomer seismic reflection data are in standard Society of Exploration Geophysicists (SEG) SEG-Y format (Barry et al., 1975) and may be downloaded for processing with public domain software such as Seismic Unix (SU), currently located at http://www.cwp.mines.edu/cwpcodes/index.html. Examples of SU processing scripts are provided in the BOOM.tar file located in the SU subfolder of the SOFTWARE folder located at the top level of this disc. In-house (USGS) DOS and Microsoft Windows compatible software for viewing SEG-Y headers - DUMPSEGY.EXE (Zihlman, 1992) - is provided in the USGS subfolder of the SOFTWARE folder. Processed profile images, trackline navigation maps, logbooks, and formal metadata may be viewed with a web browser.

Louisiana↗
USGS2024

Physics-based forecasts of eruptive vent locations at calderas

Constraining stresses in the Earth's crust in volcanic regions is critical for understanding many mechanical processes related to eruptive activity. Dike pathways, in particular, are shaped by the orientation of principal stress axes. Therefore, accurate models of dike trajectories and future vent locations rely on accurate estimates of stresses in the subsurface. This work presents a framework for probabilistic constraint of the stress state of calderas by combining three-dimensional physics-based dike pathway models with observed past vent locations using a Monte Carlo approach. The retrieved stress state is then used to produce probability maps of future vent opening across a caldera. We test our stress inversion and vent forecast approach on synthetic scenarios, and find it successful depending on the distribution of the available vents and the complexity of the volcano's structural history. We explore the potential and limitations of the approach, show how its performance is sensitive to the assumptions in the models and available prior information, and discuss how it may be applied to real calderas.

Journal of Geophysical Research: Solid Earth↗
USGS2012

W phase source inversion for moderate to large earthquakes (1990-2010)

Rapid characterization of the earthquake source and of its effects is a growing field of interest. Until recently, it still took several hours to determine the first-order attributes of a great earthquake (e.g. M w ≥ 7.5), even in a well-instrumented region. The main limiting factors were data saturation, the interference of different phases and the time duration and spatial extent of the source rupture. To accelerate centroid moment tensor (CMT) determinations, we have developed a source inversion algorithm based on modelling of the W phase, a very long period phase (100–1000 s) arriving at the same time as the P wave. The purpose of this work is to finely tune and validate the algorithm for large-to-moderate-sized earthquakes using three components of W phase ground motion at teleseismic distances. To that end, the point source parameters of all M w ≥ 6.5 earthquakes that occurred between 1990 and 2010 (815 events) are determined using Federation of Digital Seismograph Networks, Global Seismographic Network broad-band stations and STS1 global virtual networks of the Incorporated Research Institutions for Seismology Data Management Center. For each event, a preliminary magnitude obtained from W phase amplitudes is used to estimate the initial moment rate function half duration and to define the corner frequencies of the passband filter that will be applied to the waveforms. Starting from these initial parameters, the seismic moment tensor is calculated using a preliminary location as a first approximation of the centroid. A full CMT inversion is then conducted for centroid timing and location determination. Comparisons with Harvard and Global CMT solutions highlight the robustness of W phase CMT solutions at teleseismic distances. The differences in M w rarely exceed 0.2 and the source mechanisms are very similar to one another. Difficulties arise when a target earthquake is shortly (e.g. within 10 hr) preceded by another large earthquake, which disturbs the waveforms of the target event. To deal with such difficult situations, we remove the perturbation caused by earlier disturbing events by subtracting the corresponding synthetics from the data. The CMT parameters for the disturbed event can then be retrieved using the residual seismograms. We also explore the feasibility of obtaining source parameters of smaller earthquakes in the range 6.0 ≤M w < 6.5. Results suggest that the W phase inversion can be implemented reliably for the majority of earthquakes of M w = 6 or larger.

Geophysical Journal International↗
USGS2004

Archive of digital boomer and chirp seismic reflection data collected during USGS Cruises 01RCE05 and 02RCE01 in the Lower Atchafalaya River, Mississippi River Delta, and offshore southeastern Louisiana, October 23-30, 2001, and August 18-19, 2002

In October of 2001 and August of 2002, the U.S. Geological Survey conducted geophysical surveys of the Lower Atchafalaya River, the Mississippi River Delta, Barataria Bay, and the Gulf of Mexico south of East Timbalier Island, Louisiana. This report serves as an archive of unprocessed digital marine seismic reflection data, trackline maps, navigation files, observers' logbooks, GIS information, and formal FGDC metadata. In addition, a filtered and gained GIF image of each seismic profile is provided. The archived trace data are in standard Society of Exploration Geophysicists (SEG) SEG-Y format (Barry and othes, 1975) and may be downloaded and processed with commercial or public domain software such as Seismic Unix (SU). Examples of SU processing scripts and in-house (USGS) software for viewing SEG-Y files (Zihlman, 1992) are also provided. Processed profile images, trackline maps, navigation files, and formal metadata may be viewed with a web browser. Scanned handwritten logbooks and Field Activity Collection System (FACS) logs may be viewed with Adobe Reader.

Louisiana↗
USGS2015

Topographic and Hydrographic GIS Datasets for the Afghanistan Geological Survey and U.S. Geological Survey 2014 Mineral Areas of Interest

Mineral extraction and associated industries play an important role in the Afghan economy, particularly in the &ldquo;transitional era&rdquo; of declining foreign aid and withdrawal of foreign troops post 2014. In addition to providing a substantial source of government revenue, other potential benefits of natural resource development include boosted exports, employment opportunities, and strengthened industrialization (Joya, 2012). Continued exploration and investment in these industries has resulted in large economic improvements since 2007, when this series of studies was initiated. At that time, the &ldquo;Preliminary Non-Fuel Mineral Resource Assessment of Afghanistan&rdquo; was completed by members of the U.S. Geological Survey and Afghanistan Geological Survey (Peters and others, 2007). The assessment published a series of country-wide datasets, including a digital elevation model (DEM), elevation contours, hydrography, transportation routes, geophysics, and cultural datasets (Peters and others, 2007). It also delineated 20 mineralized areas for further study using a geologic-based methodology. A second data product, &ldquo;Summaries of Important Areas for Mineral Investment and Production Opportunities of Nonfuel Minerals in Afghanistan,&rdquo; was released by Peters and others in 2011. This work highlighted geologic, geohydrologic, and hyperspectral studies that were carried out in specific Areas of Interest (AOIs) to assess the location and characteristics of mineral resources. Also included in the 2011 publication is a collection of appendixes and inventories of Geographic Information System (GIS) datasets for each of the 24 identified AOIs. A third data product was released in 2013 (Casey and Chirico, 2013), publishing datasets for five different AOIs, two subareas, and one AOI extension. Each dataset contains vector shapefiles of the AOI boundary, streams, roads, and contours at 25-, 50-, and 100-meter (m) intervals, as well as raster files of the AOI&rsquo;s DEM and hillshade. This work represents the fourth installment of the series, and publishes a dataset of eight new AOIs and one subarea within Afghanistan. These areas include Dasht-e-Nawar, Farah, North Ghazni, South Ghazni, Chakhansur, Godzareh East, Godzareh West, and Namaksar-e-Herat AOIs and the Central Bamyan subarea of the South Bamyan AOI (datasets for South Bamyan were published previously in Casey and Chirico, 2013). For each AOI and subarea, this dataset collection consists of the areal extent boundaries, elevation contours at 25-, 50-, and 100-m intervals, and an enhanced DEM. Hydrographic datasets covering the extent of four AOIs and one subarea are also included in the collection. The resulting raster and vector layers are intended for use by government agencies, developmental organizations, and private companies in Afghanistan to support mineral assessments, monitoring, management, and investment.

Open-File Report↗
USGS2014

Coal and petroleum resources in the Appalachian basin: distribution, geologic framework, and geochemical character

Fossil fuels from the Appalachian basin region have been major contributors to the Nation&rsquo;s energy supplies over much of the last three centuries. Appalachian coal and petroleum resources are still available in sufficient quantities to contribute significantly to fulfilling the Nation&rsquo;s energy needs. Although both conventional oil and gas continue to be produced in the Appalachian basin, most new wells in the region are drilled in shale reservoirs to produce natural gas. U.S. Geological Survey (USGS) Professional Paper 1708 is a modern, indepth collection of reports, cross sections, and maps that describe the geology of the Appalachian basin and its fossil fuel resources. This publication supplements and updates older USGS regional studies of Appalachian basin coal and petroleum resources. Some chapters are new, and several have been published in outside journals or as other USGS publications. Although this volume is not a comprehensive regional treatment of all notable geologic and fossil fuel localities in the Appalachian basin, the selected study areas and topics presented in the chapters pertain to large segments of the basin and a wide range of stratigraphic intervals. This volume discusses the locations of coal and petroleum accumulations, the stratigraphic and structural framework, and the geochemical characteristics of the coal beds and petroleum in the basin, as well as the results of recent USGS assessments of coal, oil, and gas resources in the basin. Many of the maps and accompanying data supporting the reports in this volume are available from chapter I.1 as downloadable geographic information system (GIS) data files about the characteristics of selected coal beds and oil and gas fields, locations of oil and gas wells, coal production, coal chemistry, total petroleum system (TPS) boundaries, and bedrock geology. Log ASCII Standard (LAS) files for geophysical (gamma ray) wireline well logs are included in other chapters. Professional Paper 1708 is intended primarily for geoscientists in academia, industry, and government who are interested in Appalachian basin geology and its coal and petroleum resources. Other users, however, may find the topics, papers, and digital images valuable for land-use and policy planning. Among the anticipated benefits of the report are improvements in (1) resource assessment estimates and methodology, (2) exploration strategies, (3) basin models, and (4) energy use policies.

Appalachian basin↗
USGS2009

Preliminary Physical Stratigraphy and Geophysical Data From the USGS Dixon Core, Onslow County, North Carolina

In October through November 2006, scientists from the U. S. Geological Survey (USGS) Eastern Region Earth Surface Processes Team (EESPT) and the Raleigh (N.C.) Water Science Center (WSC), in cooperation with the North Carolina Geological Survey (NCGS) and the Onslow County Water and Sewer Authority (ONWASA), drilled a stratigraphic test hole and well in Onslow County, N.C. The Dixon corehole was cored on ONWASA water utility property north of the town of Dixon, N.C., in the Sneads Ferry 7.5-minute quadrangle at latitude 34deg33'35' N, longitude 77deg26'54' W (decimal degrees 34.559722 and -77.448333). The site elevation is 66.0 feet (ft) above mean sea level as determined using a Paulin precision altimeter. The corehole attained a total depth of 1,010 ft and was continuously cored by the USGS EESPT drilling crew. A groundwater monitoring well was installed in the screened interval between 234 and 254 ft below land surface. The section cored at this site includes Upper Cretaceous, Paleogene, and Neogene sediments. The Dixon core is stored at the NCGS Coastal Plain core storage facility in Raleigh. The Dixon corehole is the fourth and last in a series of planned North Carolina benchmark coreholes drilled by the USGS Coastal Carolina Project. These coreholes explore the physical stratigraphy, facies, and thickness of Cretaceous, Paleogene, and Neogene Coastal Plain sediments in North Carolina. Correlations of lithologies, facies, and sequence stratigraphy can be made with the Hope Plantation corehole, N.C., near Windsor in Bertie County (Weems and others, 2007); the Elizabethtown corehole, near Elizabethtown, N.C., in Bladen County (Self-Trail and others, 2004b); the Smith Elementary School corehole, near Cove City, N.C., in Craven County (Harris and Self-Trail, 2006; Crocetti, 2007); the Kure Beach corehole, near Wilmington, N.C., in New Hanover County (Self-Trail and others, 2004a); the Esso#1, Esso #2, Mobil #1, and Mobil #2 cores in Albermarle and Pamlico Sounds, N.C. (Zarra, 1989); and the Cape Fear River outcrops in Bladen County, N.C. (Farrell, 1998; Farrell and others, 2001). This report contains the lithostratigraphic summary recorded at the drill site, core photographs, geophysical data, and calcareous nannofossil biostratigraphic correlations.

Open-File Report↗
USGS2022

Tungsten skarn potential of the Yukon-Tanana Upland, eastern Alaska, USA—A mineral resource assessment

Tungsten (W) is used in a variety of industrial and technological applications and has been identified as a critical mineral for the United States, India, the European Union, and other countries. These countries rely on W imports mostly from China, which leaves them vulnerable to supply disruption. Consequently, the U.S. government has a current initiative to understand domestic resource potential. The eastern Alaska portion of the Yukon-Tanana Upland (YTU), is prospective for W skarn deposits, the major source of global W supply. The regional geology consists of juxtaposed Paleozoic lithotectonic packages that were reaccreted to North America in the Mesozoic . Multiple subsequent episodes of arc-related magmatism intruded the lithotectonic packages, accompanied by W skarn formation mostly associated with 100–90 Ma intrusions; major W skarn deposits in Canada are part of the same metallogenic event (e.g., Mactung, Cantung). In this paper, we present an assessment for undiscovered W skarn resources for parts of the lesser-explored western (Alaskan) portion of the YTU. We used GIS proximity analysis to map the intersection of pluton and carbonate-bearing rocks to define three permissive tracts for W skarn deposits. The permissive tracts were qualitatively assessed by mineral potential mapping using region-wide sediment geochemistry and mineral concentrate datasets. This analysis showed that much of the western YTU has high potential for undiscovered W skarn deposits, whereas the eastern and southern YTU had only isolated areas of medium to high potential. Historical production and the quality of the geochemistry data of the western YTU tract (ca. 9200 km 2 ) permitted a quantitative assessment of undiscovered W resources. Probabilistic estimates by a panel of 20 experts predicted a 70% chance of one to three undiscovered W skarn deposits in the western YTU tract. The rationale for favorability employed by the expert panel included favorable lithology, previous production, clustering of previously mined deposits, W placers in the area, lack of recent exploration, pan concentrates containing W minerals, and W geochemical anomalies. Estimates were combined with a global grade and tonnage model for W skarns in a Monte Carlo simulation and provided a median estimate of undiscovered resources of 94 kt WO 3 . If the undiscovered W skarn deposits are located close to infrastructure (e.g., near Fairbanks, or close to roads and/or power grid), application of an economic filter indicates that the median total economically recoverable WO 3 is 63 kt with a net present value (NPV) of $330 million USD (2008 dollars). Whereas if deposits are far from infrastructure, median recoverable WO 3 is only 30 kt and the NPV is $44 million. Our models for contained WO 3 resources and NPV estimates for the western YTU tract are considerably lower than the known resources in skarns in adjacent areas in Canada. Estimates for the western YTU are also lower than preliminary estimates for undiscovered W skarn deposits in areas of the western conterminous United States. We speculate that lower permeability and continuity of favorable carbonate rock horizons in the relatively higher-grade metamorphic country rocks in the Alaska portion of the YTU may explain some of the differences in prospectivity. More detailed geologic mapping, modern geochemistry, and geophysical surveys are needed to refine the resource potential of the whole YTU. Regardless, quantitative mineral resource assessment provides a useful tool for making first-order regional estimates of undiscovered resources, identifying target areas for new data acquisition, and guiding research on the fundamental controls of district-scale metallogenic endowments.

Alaska↗
USGS2018

Harnessing big data to rethink land heterogeneity in Earth system models

The continual growth in the availability, detail, and wealth of environmental data provides an invaluable asset to improve the characterization of land heterogeneity in Earth system models – a persistent challenge in macroscale models. However, due to the nature of these data (volume and complexity) and computational constraints, these data are underused for global applications. As a proof of concept, this study explores how to effectively and efficiently harness these data in Earth system models over a 1/4° ( ∼ 25 km) grid cell in the western foothills of the Sierra Nevada in central California. First, a novel hierarchical multivariate clustering approach (HMC) is introduced that summarizes the high-dimensional environmental data space into hydrologically interconnected representative clusters (i.e., tiles). These tiles and their associated properties are then used to parameterize the sub-grid heterogeneity of the Geophysical Fluid Dynamics Laboratory (GFDL) LM4-HB land model. To assess how this clustering approach impacts the simulated water, energy, and carbon cycles, model experiments are run using a series of different tile configurations assembled using HMC. The results over the test domain show that (1) the observed similarity over the landscape makes it possible to converge on the macroscale response of the fully distributed model with around 300 sub-grid land model tiles; (2) assembling the sub-grid tile configuration from available environmental data can have a large impact on the macroscale states and fluxes of the water, energy, and carbon cycles; for example, the defined subsurface connections between the tiles lead to a dampening of macroscale extremes; (3) connecting the fine-scale grid to the model tiles via HMC enables circumvention of the classic scale discrepancies between the macroscale and field-scale estimates; this has potentially significant implications for the evaluation and application of Earth system models.

Hydrology and Earth System Sciences↗
USGS1983

Sourcebook of locations of geophysical surveys in tunnels and horizontal holes including results of seismic-refraction surveys, Rainier Mesa, Aqueduct Mesa, and Area 16, Nevada Test Site

Seismic refraction surveys have been obtained sporadically in tunnels in zeolitized tuff at the Nevada Test Site since the late 1950's. Commencing in 1967 and continuing to date (1982), extensive measurements of shear- and compressional-wave velocities have been made in five tunnel complexes in Rainier and Aqueduct Mesas and in one tunnel complex in Shoshone Mountain. The results of these surveys to 1980 are compiled in this report. In addition, extensive horizontal drilling was initiated in 1967 in connection with geologic exploration in these tunnel complexes for sites for nuclear weapons tests. Seismic and electrical surveys were conducted in the majority of these holes. The type and location of these tunnel and borehole surveys are indexed in this report. Synthesis of the seismic refraction data indicates a mean compressional-wave velocity near the nuclear device point (WP) of 23 tunnel events of 2,430 m/s (7,970 f/s) with a range of 1,846-2,753 m/s (6,060-9,030 f/s). The mean shear-wave velocity of 17 tunnel events is 1,276 m/s (4,190 f/s) with a range of 1,140-1,392 m/s (3,740-4,570 f/s). Experience indicates that these velocity variations are due chiefly to the extent of fracturing and (or) the presence of partially saturated rock in the region of the survey.

Nevada↗
USGS2006

Archive of digital boomer seismic reflection data collected during USGS Cruise 97CCT01 offshore of central South Carolina, June 1997

In June of 1997, the U.S. Geological Survey, in cooperation with Coastal Carolina University, conducted a geophysical survey of the shallow geologic framework of the continental shelf offshore of central South Carolina from the Isle of Palms to Bull Island. This report serves as an archive of unprocessed digital boomer seismic reflection data, trackline maps, navigation files, GIS information, observers' logbooks, Field Activity Collection System (FACS) logs, and formal FGDC metadata. Filtered and gained digital images of the seismic profiles are also provided. The archived trace data are in standard Society of Exploration Geophysicists (SEG) SEG-Y format (Barry and others, 1975) and may be downloaded and processed with commercial or public domain software such as Seismic Unix (SU). Example SU processing scripts and USGS software for viewing the SEG-Y files (Zihlman, 1992) are also provided.

South Carolina↗
USGS2008

Three-Dimensional Geologic Model of Complex Fault Structures in the Upper Seco Creek Area, Medina and Uvalde Counties, South-Central Texas

This multimedia report shows and describes digital three-dimensional faulted geologic surfaces and volumes of the lithologic units of the Edwards aquifer in the upper Seco Creek area of Medina and Uvalde Counties in south-central Texas. This geologic framework model was produced using (1) geologic maps and interpretations of depositional environments and paleogeography; (2) lithologic descriptions, interpretations, and geophysical logs from 31 drill holes; (3) rock core and detailed lithologic descriptions from one drill hole; (4) helicopter electromagnetic geophysical data; and (5) known major and minor faults in the study area. These faults were used because of their individual and collective effects on the continuity of the aquifer-forming units in the Edwards Group. Data and information were compared and validated with each other and reflect the complex relationships of structures in the Seco Creek area of the Balcones fault zone. This geologic framework model can be used as a tool to visually explore and study geologic structures within the Seco Creek area of the Balcones fault zone and to show the connectivity of hydrologic units of high and low permeability between and across faults. The software can be used to display other data and information, such as drill-hole data, on this geologic framework model in three-dimensional space.

Scientific Investigations Report↗
USGS1956

U.S. Geological Survey exploration program in the Trixie area, East Tintic mining district, Utah County, Utah

The Trixie area is in the south central part of the East Tintic mining district, Utah, and is believed to include the intersections of several mineralized pebble dike-fissure zones and a major, easterly trending fault. The fissure-fault intersections, which are considered to be favorable ore-locallizing structures, are concealed by lavas and tuffs several hundred feet thick that are strongly bleached and altered and which contain positive geochemical anomalies. During the summer months of 1954 and 1955 for the U. S. Geological Survey, under contract, 9 exploration holes were drilled in the Trixie area: 1) to investigate the relations of surface geochemical anomalies to possible concealed ore, 2) to determine the structure and stratigraphic units in the sedimentary rocks concealed beneath the lava, and 3) to further develop and refine geologic and geochemical techniques that may be useful in prospecting for concealed ore deposits in the East Tintic and other mining districts. This report briefly discusses the geology, hydrothermal alteration, and geochemical and geophysical anomalies in the Trixie area and presents the logs of the drill holes and tables of the copper, lead, zinc, and silver content, expressed in parts per million, of the drill cuttings and drill core.

Utah↗