USGS Science⌕ Search

SEARCH · USGS Science

Results for “Environmental Technology”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 325 records · Page 18Linked to original sources
USGS2002

Molecular weight, polydispersity, and spectroscopic properties of aquatic humic substances

The number- and weight-averaged molecular weights of a number of aquatic fulvic acids, a commercial humic acid, and unfractionated organic matter from four natural water samples were measured by high-pressure size exclusion chromatography (HPSEC). Molecular weights determined in this manner compared favorably with those values reported in the literature. Both recent literature values and our data indicate that these substances are smaller and less polydisperse than previously believed. Moreover, the molecular weights of the organic matter from three of the four natural water samples compared favorably to the fulvic acid samples extracted from similar environments. Bulk spectroscopic properties of the fulvic substances such as molar absorptivity at 280 nm and the E4/E6 ratio were also measured. A strong correlation was observed between molar absorptivity, total aromaticity, and the weight average molecular weights of all the humic substances. This observation suggests that bulk spectroscopic properties can be used to quickly estimate the size of humic substances and their aromatic contents. Both parameters are important with respect to understanding humic substance mobility and their propensity to react with both organic and inorganic pollutants.

Environmental Science & Technology↗
USGS2002

Coupling of hydrologic transport and chemical reactions in a stream affected by acid mine drainage

Experiments in St. Kevin Gulch, an acid mine drainage stream, examined the coupling of hydrologic transport to chemical reactions affecting metal concentrations. Injection of LiCl as a conservative tracer was used to determine discharge and residence time along a 1497-m reach. Transport of metals downstream from inflows of acidic, metal-rich water was evaluated based on synoptic samples of metal concentrations and the hydrologic characteristics of the stream. Transport of SO 4 and Mn was generally conservative, but in the subreaches most affected by acidic inflows, transport was reactive. Both 0.1-um filtered and particulate Fe were reactive over most of the stream reach. Filtered Al partitioned to the particulate phase in response to high instream concentrations. Simulations that accounted for the removal of SO 4 , Mn, Fe, and Al with first-order reactions reproduced the steady-state profiles. The calculated rate constants for net removal used in the simulations embody several processes that occur on a stream-reach scale. The comparison between rates of hydrologie transport and chemical reactions indicates that reactions are only important over short distances in the stream near the acidic inflows, where reactions occur on a comparable time scale with hydrologic transport and thus affect metal concentrations.

Environmental Science & Technology↗
USGS2002

Reductive dehalogenation of hexachloroethane, carbon tetrachloride, and bromoform by anthrahydroquinone disulfonate and humic acid

The reductive dehalogenation of hexachloroethane (C2Cl6), carbon tetrachloride (CCl4), and bromoform (CHBr3) was examined at 50??C in aqueous solutions containing either (1) 500 ??M of 2,6-anthrahydroquinone disulfonate (AHQDS), (2) 250 ??M Fe2+, or (3) 250 ??M HS-. The pH ranged from 4.5 to 11.5 for AHQDS solutions and was 7.2 in the Fe2+ solutions and 7.8 in the HS- solutions. The observed disappearance of C2Cl6 in the presence of AHQDS was pseudo-first-order and fit k??ccl4 = k0[A(OH)2] + k1[A(OH)O-] + k2[A(O)22-] where A(OH)2, A(OH)O-, and A(O)22- represent the concentrations of the three forms of the AHQDS in solution. The values of k0, k1, and k2 were ???0,0.031, and 0.24 M-1 s-1, respectively. The addition of 25 mg of C/L of humic acid or organic matter extracted from Borden aquifer solids to aqueous solutions containing 250 ??M HS- or Fe2+ increased the reduction rate by factors of up to 10. The logarithms of the rate constants for the disappearance of C2Cl6 and CCl4 in seven different experimental systems were significantly correlated; log k???ccl4 = 0-64 log k??? c2cl6 - 0.83 with r2 = 0.80. The observed trend in reaction rates of C2Cl6 > CCl4 > CHBr3 is consistent with a decreasing trend in one-electron reduction potentials. ?? 1994 American Chemical Society.

Environmental Science & Technology↗
USGS2002

Differences between nipher and slter shielded rain gages at two Colorado deposition monitoring sites

In the last decade the United States and Canada have made significant progress in establishing spatial ad temporal estimates of atmospheric deposition throughout North America. Fundamental to the wet-deposition portion of these estimates is the accurate and precise measurement of precipitation amount. Goodison and others (I-3) have reported on a new type of shielded snow gage known as the Canadian MSC Nipher shielded snow gage. Because this shielded snow gage has been shown to be superior to other precipitation gages for the estimation of snowfall amount, its design was adapted to the Universal Belfort precipitation gage (4), the dominant precipitation gage used at deposition monitoring sites in the United States. Favorable results taken from monitoring sites using this modified Nipher shielded snow gage (3-6) have prompted the U.S. Environmental Protection Agency and the Electric Power Research Institute to adopt the Nipher shielded Belfort gage as a standard piece of equipment in the Acid MODES and Operational Evaluation Network (OEN) monitoring programs and to propose that is be included as a standard snow gage in other North American deposition monitoring programs. This communication details preliminary results from two of nine NADP/NTN deposition monitoring sites selected by the Environmental Protection Agency to compare Nipher shielded Belfort precipitation gage volumes to volumes obtained from the standard Belfort gage used in the NADP/NTN monitoring program.

Environmental Science & Technology↗
USGS2002

Measurement of in situ rates of selenate removal by dissimilatory bacterial reduction in sediments

A radioisotope method for measurement of bacteria respiratory reduction of selenate to elemental selenium in aquatic sediments was devised. Sediments were labeled with [75Se]selenate, incubated, and washed, and 75Se0(s) was determined as counts remaining in the sediments. Core profiles of selenate reduction, sulfate reduction, and denitrification were made simultaneously in the sediments of an agricultural wastewater evaporation pond. Most of the in situ selenate reduction (85%) and all the denitrificatation activities were confined to the upper 4-8 cm of the profile, whereas sulfate reduction was greatest below 8 cm (89% of total). The integrated areal rate of selenate reduction was 301 mol m-2 day-1, which results in a turnover of water column selenate in 82.4 days.

Environmental Science & Technology↗
USGS2002

The surface area of soil organic matter

The previously reported surface area for soil organic matter (SOM) of 560-800 m2/g as determined by the ethylene glycol (EG) retention method was reexamined by the standard BET method based on nitrogen adsorption at liquid nitrogen temperature. Test samples consisted of two high organic content soils, a freeze-dried soil humic acid, and an oven-dried soil humic acid. The measured BET areas for these samples were less than 1 m2/g, except for the freeze-dried humic acid. The results suggest that surface adsorption of nonionic organic compounds by SOM is practically insignificant in comparison to uptake by partition. The discrepancy between the surface areas of SOM obtained by BET and EG methods was explained in terms of the 'free surface area' and the 'apparent surface area' associated with these measurements.The previously reported surface area for soil organic matter (SOM) of 560-800 m2/g as determined by the ethylene glycol (EG) retention method was reexamined by the standard BET method based on nitrogen adsorption at liquid nitrogen temperature. Test samples consisted of two high organic content soils, a freeze-dried soil humic acid, and an oven-dried soil humic acid. The measured BET areas for these samples were less than 1 m2/g, except for the freeze-dried humic acid. The results suggest that surface adsorption of nonionic organic compounds by SOM is practically insignificant in comparison to uptake by partition. The discrepancy between the surface areas of SOM obtained by BET and EG methods was explained in terms of the 'free surface area' and the 'apparent surface area' associated with these measurements.

Environmental Science & Technology↗
USGS2002

Effect of ten quaternary ammonium cations on tetrachloromethane sorption to clay from water

The mineral surface of Wyoming bentonite (clay) was modified by replacing inorganic ions by each of 10 quaternary ammonium compounds, and tetrachloromethane sorption to the modified sorbents from water was studied. Tetrachloromethane sorption from solution to clay modified with tetramethyl-, tetraethyl-, benzyltrimethyl-, or benzyltriethylammonium cations generally is characterized by relatively high solute uptake, isotherm nonlinearity, and competitive sorption (with trichloroethene as the competing sorbate). For these sorbents, the ethyl functional groups yield reduced sorptive capacity relative to methyl groups, whereas the benzyl group appears to have a similar effect on sorbent capacity as the methyl group. Sorption of tetrachloromethane to clay modified with dodecyldimethyl(2-phenoxyethyl)-, dodecyltrimethyl-, tetradecyltrimethyl-, hexadecyltrimethyl-, or benzyldimethylhexadecylammonium bromide is characterized by relatively low solute uptake, isotherm linearity, and noncompetitive sorption. For these sorbents, an increase in the size of the nonpolar functional group(s) causes an increase in the organic carbon normalized sorption coefficient (Koc). No measurable uptake of tetrachloromethane sorption by the unmodified clay or clay modified by ammonium bromide was observed.

Environmental Science & Technology↗
USGS2002

Comparison of automated segmented-flow and discrete analyzers for the determination of nutrients in water

Water samples with specific conductances ranging from 66 to 6950 ??mho/cm at 25 ??C were analyzed for ammonia-N (NH3-N), nitrate plus nitrite-N (NO3 + NO2-N), nitrite-N (NO2-N), and phosphate-P (PO4-P) by using both a "segmented-flow" analyzer and a "discrete" analyzer. Plots of the discrete vs. the segmented-flow results showed linear correlation coefficients of 0.9980 for NH3-N, 0.9997 for NO3 + NO2-N, 0.9998 for NO2-N, and 0.9950 for PO4-P. The significances of the slope and the y intercept of each plot are discussed in terms of possible biases which may exist between the two systems. Data concerning precision and accuracy for both analyzers are presented. For the four analytes, the rate of sample analysis was 60 samples per hour on the discrete analyzer and 40 samples per hour on the segmented-flow analyzer. ?? 1981 American Chemical Society.

Environmental Science & Technology↗
USGS2002

Migration through soil of organic solutes in an oil-shale process water

The migration through soil of organic solutes in an oil-shale process water (retort water) was studied by using soil columns and analyzing leachates for various organic constituents. Retort water extracted significant quantities of organic anions leached from ammonium-saturated-soil organic matter, and a distilled-water rinse, which followed retort-water leaching, released additional organic acids from the soil. After being corrected for organic constitutents extracted from soil by retort water, dissolved-organic-carbon fractionation analyses of effluent fractions showed that the order of increasing affinity of six organic compound classes for the soil was as follows: hydrophilic neutrals nearly equal to hydrophilic acids, followed by the sequence of hydrophobic acids, hydrophilic bases, hydrophobic bases, and hydrophobic neutrals. Liquid-chromatographic analysis of the aromatic amines in the hydrophobic- and hydrophilic-base fractions showed that the relative order of the rates of migration through the soil column was the same as the order of migration on a reversed-phase, octadecylsilica liquid-chromatographic column.

Environmental Science & Technology↗