USGS Science⌕ Search

SEARCH · USGS Science

Results for “Science of the Total Envionrment”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

1,687 records · Page 17Linked to original sources
USGS2026

Black rails in Baja California

Summarizing records from 1905 to 2025, we document the presence and distribution of the California black rail ( Laterallus jamaicensis coturniculus ) in northwestern México, particularly Baja California and the Colorado River Delta. This subspecies has a restricted distribution in the western U.S. and northwestern México. We found few records over the past century: sparse detections in the early 1900s and an increase in reported records after 2000. Over 120 years, we compiled 35 documented records of California black rail occurrence in Baja California with a minimum reported count of 56 rails. Our call-broadcast survey methods reconfirmed previously occupied sites and documented the species at a previously unreported site. Surveys in the Baja California portion of the Colorado River Delta yielded 20 detections across nine survey events between 2000 and 2022. In April 2003, standardized surveys detected 12 California black rails: 7 in Bahía de San Quintín, 3 in Arroyo San Telmo, and 2 in Arroyo El Rosario. Our recent survey work (2022–2025) recorded maximum monthly counts of 31 detections at Bahía de San Quintín and 15 detections at Estero de Punta Banda, the latter representing a previously undocumented location for the subspecies. These surveys also yielded the first photographic and acoustic documentation of California black rail in México. The contribution of spatial and temporal data provided by citizen science platforms increased our understanding of the subspecies’ distribution. Enforceable protection of this subspecies’ habitat is needed to safeguard its persistence.

Baja California↗
USGS2024

Status and understanding of groundwater quality in the Mojave Basin Domestic-Supply Aquifer study unit, 2018—California GAMA Priority Basin Project

Groundwater quality in the western part of the Mojave Desert in San Bernardino County, California, was investigated in 2018 as part of the California State Water Resources Control Board Groundwater Ambient Monitoring and Assessment Program Priority Basin Project. The Mojave Basin Domestic-Supply Aquifer study unit (MOBS) region was divided into two study areas—floodplain and regional—to assess differences between the two major aquifers used for drinking water supply in the area. This assessment characterized the quality of ambient groundwater and not the quality of treated drinking water. The study included three components: (1) a status assessment, which characterized the quality of groundwater resources used for domestic drinking-water supply in the floodplain and regional study areas; (2) a brief understanding assessment, which evaluated factors that could potentially affect the quality of groundwater used by domestic wells in the region; and (3) a comparative assessment between the groundwater resources used by domestic wells and public-supply wells in the two study areas. The domestic-well assessment was based on data collected by the U.S. Geological Survey from 48 domestic wells in January–May 2018. The public-supply assessment was based on data for samples from 322 public-supply wells in 2008–18, either collected by the U.S. Geological Survey or compiled from the California State Water Resources Control Boards Division of Drinking Water publicly available database. Concentrations of water-quality constituents in ambient groundwater were compared to regulatory and non-regulatory benchmarks typically used by the State of California and Federal agencies as health-based or aesthetic standards for public drinking water. Relative concentrations, defined as the measured concentration divided by the benchmark concentration, were classified as high (greater than 1.0), moderate (greater than 0.5 for inorganic constituents or 0.1 for organic and special-interest constituents, and not high), or low (concentrations lower than moderate). The floodplain and regional study areas were divided into 15 and 35 grid cells, respectively, and grid-based methods were used to compute the areal proportions of the two study areas with high, moderate, or low relative concentrations of individual constituents and classes of constituents. For the domestic-supply assessment, one or more inorganic constituents with health-based benchmarks were detected at high relative concentrations in 58 percent of the regional study area and 13 percent of the floodplain study area. The inorganic constituents with health-based benchmarks detected at high relative concentrations in the regional study area were arsenic, chromium and hexavalent chromium, fluoride, adjusted gross alpha particle activity, uranium, molybdenum, strontium, and nitrate; only arsenic was detected at high relative concentrations in the floodplain study area. One or more inorganic constituents with secondary maximum contaminant level benchmarks were detected at high concentrations in 15 and 6.7 percent of the regional and floodplain study areas, respectively. The constituents detected at high relative concentrations in the regional study area were total dissolved solids, chloride, sulfate, and iron; only total dissolved solids and sulfate were detected at high relative concentrations in the floodplain study area. Organic constituents were not detected at moderate or high relative concentrations in either the regional or floodplain study areas. Volatile organic compounds were detected at low relative concentrations in 21 and 27 percent of the regional and floodplain study areas, respectively, and pesticides were detected at low relative concentrations in 9.1 and 20 percent of the regional and floodplain study areas, respectively. The only individual organic constituent detected in more than 10 percent of either study area was the trihalomethane trichloromethane. Total coliform bacteria were detected in 15 and 27 percent of the grid wells in the regional and floodplain study areas, respectively. The greater prevalence of high relative concentrations of many inorganic constituents in the regional study area compared to the floodplain area likely indicates the greater diversity of geologic material at depth in aquifer material and generally finer-grained alluvium compared to the floodplain study area combined with generally older groundwater that has had more contact time with aquifer materials. In general, trace element concentrations (1) increased with increasing groundwater age, (2) increased with distance from recharge sources in the mountains, and (3) increased with closer proximity to some types of geological units. In general, groundwater from domestic wells in the floodplain study area is young, with most samples containing a component of modern groundwater based on tritium and unadjusted carbon-14 activities, whereas groundwater from domestic wells in the regional study area generally is old, with most samples having unadjusted carbon-14 ages of 5,000–40,000 years. Public-supply wells in MOBS generally were deeper than domestic wells and presumably are in contact with older, more weathered alluvium that may have more mobile trace elements, such as arsenic or uranium. However, only 26 percent of the public-supply regional study area had high relative concentrations of inorganic constituents, compared to 58 percent for the domestic regional study area. The percentages of the public-supply and domestic floodplain study areas with high relative concentrations of inorganic constituents were 11 and 13 percent, respectively. The ages of groundwater used by public-supply and domestic wells in each study area were similar, which was not expected given the greater depth of the public-supply wells. Three potential factors may contribute to these results: (1) greater spatial footprint of domestic well network, which may result in domestic wells pumping groundwater from fractured bedrock or mineralized areas not used by public-supply wells; (2) greater pumping rates in public-supply wells, resulting in more water being withdrawn from coarse-grained, heterogeneous alluvium than finer-grained layers, which may have higher concentrations of (or more mobile) inorganic constituents; and (3) a greater degree of well management with public-supply wells, which may include pausing use of or decommissioning wells if treating or blending water is not feasible to lower constituent concentrations.

California↗
USGS2025

Review: The hydrogeology of critical mineral resources relevant to the energy transition

Attaining the goals of the international treaty on climate change (the Paris Agreement) will greatly increase the demand for the critical minerals required to implement clean-energy technologies. This poses both challenges and opportunities to the hydrogeologic community from several perspectives. Here, important insights that the hydrogeological sciences have to offer for mineral exploration, mineral production, and addressing environmental issues related to mining and mine decommissioning are summarized. This study focuses on copper, cobalt, lithium, and rare earths to represent the broad spectrum of critical minerals and illustrate their relevance by referring to projected demands and production rates. The current understanding of the hydrogeologic processes that form major deposits of these minerals are then summarized. Ore is defined as the naturally occurring material from which minerals of economic value can be extracted, where most ore deposits are the products of complex hydrogeologic couplings between fluid flow, heat transport, solute transport, chemical reactions, and mechanical deformation. Exploration models for the discovery of deeper, hidden deposits are potentially informed by hydrogeologic theory and hydrogeochemical processes. Hydrogeologic understanding and methods are also essential to production and recovery. Longstanding challenges are mine dewatering and (conversely) mine water supply, as well as mineral-extraction practices such as spoil heap leaching and in situ mining. New challenges arise from element extraction from subsurface brines. Finally, the quantity of water use and potential environmental impacts of mining on water quality are at the core of ‘social license’: the approval and acceptance of society to mining activities.

Hydrogeology Journal↗
USGS1999

Selected aquatic biological investigations in the Great Salt Lake basins, 1875-1998, National Water-Quality Assessment Program

This report summarizes previous investigations of aquatic biological communities, habitat, and contaminants in streams and selected large lakes within the Great Salt Lake Basins study unit as part of the U.S. Geological Survey’s National Water-Quality Assessment Program (NAWQA). The Great Salt Lake Basins study unit is one of 59 such units designed to characterize water quality through the examination of chemical, physical, and biological factors in surface and ground waters across the country. The data will be used to aid in the planning, collection, and analysis of biological information for the NAWQA study unit and to aid other researchers concerned with water quality of the study unit. A total of 234 investigations conducted during 1875-1998 are summarized in this report. The studies are grouped into three major subjects: (1) aquatic communities and habitat, (2) contamination of streambed sediments and biological tissues, and (3) lakes. The location and a general description of each study is listed. The majority of the studies focus on fish and macroinvertebrate communities. Studies of algal communities, aquatic habitat, riparian wetlands, and contamination of streambed sediment or biological tissues are less common. Areas close to the major population centers of Salt Lake City, Provo, and Logan, Utah, are generally well studied, but more rural areas and much of the Bear River Basin are lacking in detailed information, except for fish populations.

Idaho, Utah, Wyoming↗
USGS2025

Altitude of the potentiometric surface and depth to water in the Mississippi River Valley alluvial aquifer, spring 2022

Potentiometric-surface and depth-to-water maps for spring 2022 were created for the Mississippi River Valley alluvial aquifer (MRVA) using groundwater-altitude data from 1,136 wells completed in the MRVA and from the altitude of the top of the water surface in area rivers from 160 streamgages. The potentiometric-surface and depth-to-water maps for 2022 were created to support investigations to characterize the MRVA as part of the U.S. Geological Survey Water Availability and Use Science Program. Sufficient data were available to map the potentiometric surface and depth to water of the MRVA for spring 2022 for about 83 percent of the aquifer area. The potentiometric contours ranged from 0 to 340 feet (ft) above the North American Vertical Datum of 1988. The regional direction of groundwater gradient was generally to the south-southwest, except in areas of groundwater-altitude depressions, where the groundwater gradient was into the depression, and near rivers, where the groundwater gradient can be from aquifer to the river or from the river into the aquifer. There are large depressions in the potentiometric-surface map in the lower one-half of the Cache region and in much of the Grand Prairie and Delta regions. Depth to water in the MRVA, spring 2022, by well ranged from 5.00 ft above land surface to 145.66 ft below land surface.

Mississippi River Valley alluvial aquifer↗
USGS2024

U.S.-Mexico Borderland & vegetation community map

People on both sides of the United States-Mexico border need a high-resolution, binational vegetation community map that spans the entire United States-Mexico borderlands. Traditionally, mapping efforts in this region were impeded by complex logistics related to the international border, differing national needs and plans, and resource allocations and priorities. To address this need, scientists from the U.S. Geological Survey (USGS) Southwest Biological Science Center partnered with the Sonoran Joint Venture, the U.S. Fish and Wildlife Service (FWS) Migratory Bird Program, data engineers from the Department of Biosystems Engineering at the University of Arizona, and collaborators from the Wildlands Network, the Borderlands Program to produce the first prototype land cover map within the overlapping Mojave Desert, Sonoran Desert, and the North American Bird Conservation Initiative’s Bird Conservation Region 33 (BCR33) using Landsat satellite data . BCR33 is an area of high biodiversity, providing habitat for bird species of concern and other wildlife. The land cover map supports FWS recovery plan efforts related to conservation planning activities for many species, including Yellow-billed Cuckoo ( Coccyzus americanus ), Cactus Ferruginous Pygmy-Owl ( Glaucidium brasilianum cactorum ), Southwestern Willow Flycatcher ( Empidonax traillii extimus ), Yuma Ridgway’s Rail ( Rallus obsoletus yumanensis ), Bendire’s thrasher ( Toxostoma bendirei ), LeConte’s thrasher ( Toxostoma lecontei ), Masked Bobwhite ( Colinus virginianus ridgwayi ), jaguar ( Panthera onca ), and endangered plants such as Bartram’s stonecrop ( Graptopetalum bartramii ) and the Pima pineapple cactus ( Coryphantha robustispina ssp. robustispina ). In 2024, a Phase-II map for the full BCR33 region was completed, increasing the understanding of the binational nature of natural communities. The published map and associated paper can be found here .

Borderland↗
USGS1976

Non-radiometric borehole geophysical detection of geochemical halos surrounding sedimentary uranium deposits

Roll-type uranium deposits are formed by the concentration of uranium by ground water in geochemical cells. Non-uranium minerals having different solubilities may be deposited ahead of or behind the uranium minerals, forming halos that surround the ore. In addition, oxidizing and reducing environmental conditions may cause zones of mineral alteration to develop beyond the limits of the uranium deposit. Certain physical property anomalies that are commonly associated with halos can be detected by relatively fast and inexpensive borehole geophysical measurements made either in individual holes, or between two adjacent holes. Borehole measurements that have been found to be useful include electrical resistivity, induced polarization, and magnetic susceptibility. Electrical resistivity is increased by the presence of calcite and other cementing minerals that sometimes create permeability barriers in the neighborhood of uranium deposits. Induced polarization (IP) response is increased by sulfide and clay minerals that are commonly found in anomalous concentrations near roll-type deposits. Magnetic susceptibility is usually decreased by the oxidation of magnetite to hematite or limonite in the zone of chemical alteration that is left as a trail behind roll fronts. Borehole measurements of electrical resistivity, induced polarization and magnetic susceptibility were made in the vicinity of a uranium roll-type deposit in south Texas. Results indicate that mineral halos can be detected by borehole measurements made. in wide-spaced drill holes, and that the total amount of drilling needed to find a deposit can be reduced substantially by this exploration approach.

Open-File Report↗
USGS2024

Conceptual hydrogeologic framework and groundwater budget near the southeastern part of Puget Sound, Washington

More than 1 million people live within the active model area (AMA) in the southeastern part of the lowlands surrounding Puget Sound, or Puget Lowland, Washington, and groundwater is the source for approximately one-half of their public, domestic, and irrigation water demands. The 887-square-mile AMA, located in King and Pierce Counties, represents the area of analysis for the conceptual hydrogeologic framework and numerical groundwater-flow models within the study area and includes the Puyallup River and Chambers-Clover Creek watersheds. To assess the potential hydrologic and anthropogenic impacts to groundwater and the connected surface-water resources, conceptual and numerical groundwater-flow models of groundwater flow were developed by the U.S. Geological Survey Washington Water Science Center in close cooperation with 18 water-resource agencies and stakeholders. This report presents information used to characterize the groundwater-flow system and the development of a numerical model in the AMA. Included are descriptions of the geology and conceptual hydrogeologic framework, groundwater levels and flow directions, groundwater recharge and discharge, numerical groundwater-flow model construction and results, and model limitations. The study area encompasses the western part of Pierce County and the southwestern part of King County, Washington. The study area extends south to the Nisqually River, southwest to Tanwax Creek, northeast to the Green River, and north through the valley near Auburn and adjacent uplands. It is bounded on the east by foothills of the Cascade Range, and on the northwest by Puget Sound.

Washington↗
USGS2026

Evaluating the U.S. Geological Survey’s earthquake shaking hazard forecasts and their implications on seismic risk

We analyze the last six update cycles of the long-term probabilistic earthquake shaking hazard forecast from the U.S. Geological Survey (USGS) and discuss the changes in hazard estimates from the 1996 to the latest 2023 update of the National Seismic Hazard Model (NSHM) for the conterminous U.S. We summarize how our understanding of earthquake hazards has evolved over the last two decades and quantify the implications of changing hazards on people, buildings, and lifeline infrastructure. The net effect of changes in hazard estimates, with reference to the mean hazard from the 2023 NSHM update that has 2% probability of exceedance in 50 years, suggests an overall increase in total geographic areas facing very strong shaking levels (modified Mercalli Intensity (MMI) of VII or more) when compared with any of the previous cycles. This increase puts ~159.2 million people (an increase from 111.8 million when using the 2018 NSHM), ~47.3 million residential buildings (an increase from 32.5 million with the 2018 NSHM), and ~$25.6 trillion of economic exposure of all buildings (an increase from $17.4 trillion when using the 2018 NSHM) at risk from earthquakes. We demonstrate that small changes in hazard estimates do not necessarily imply small changes in risk estimates. Therefore, changes in risk estimates can be used to highlight key USGS NSHM updates for improving risk mitigation efforts.

Earthquake Spectra Journal↗
USGS1976

Uranium and trace elements in stream sediments as an exploration tool

More than 45 trace elements have been reported in anomalous amounts in the uranium ores. The specific suite of elements associated with any one uranium deposit varies according to deposit type and geologic province. The primary geochemical halo of uranium and associated trace elements in the host rock, together with secondary dispersion halo in soils and alluvium, offers a potential geochemical exploration target. Sediment from streams near low-grade uranium occurrences in arkosic sandstone of the Denver basin, Colorado, and sediment from streams in the igneous and metamorphic terrace near the Midnite mine of eastern Washington have been analyzed for acid-extractable U, Cu,Pb, Zn, Ni, Co, Fe, Mn, Mo, Cd, Cr, Ag, V, and Se, and for total Fe, Mn, Hg, As, and organic C. The -80 mesh fraction of the alluvium downstream from a small uraniferous limonite occurrence in the Denver basin shows anomalous concentrations of U, Pb, As, Ni, Mo, V, Zn, and Se. Anomalous concentrations of U persist farther downstream (as much as 1,000 m) than any of the trace elements. In another stream system southeast of Denver, above-background levels of U, Pb, As, Zn, V, Fe, and Mn occur near a uranium anomaly (defined by other methods) which has no surface mineralization. In the Midnite mine area, sediments of streams draining prospect areas showed anomalous concentrations of uranium (as much as 10 times background), but no accompanying anomalous trace-element concentrations, although analyses of Midnite mine ores show that a broad suite of trace elements are associated with uranium.

Open-File Report↗
USGS2026

Earthquake rupture arrest from depth‐dependent frictional stability on the Pütürge segment of the East Anatolian Fault Zone, Türkiye (Turkey)

Determining why earthquake ruptures stop is a central challenge in earthquake science and seismic hazard assessment. The Pütürge segment of the East Anatolian Fault Zone, Türkiye, exhibits shallow creep (<∼3 km depth) yet hosts M > 6.5 earthquake ruptures at greater depth. Here, we evaluate whether variations in frictional stability along this segment aided arrest of the 2020 M 6.7 Elaziğ and 2023 M 7.8 Pazarcık earthquake ruptures. Analysis of Sentinel‐1 Synthetic Aperture Radar imagery indicates the 2023 M 7.8 rupture propagated laterally into a metamorphic massif within the Pütürge segment, where slip rapidly decayed below detection limits. Creepmeters along this segment recorded no significant surface afterslip (<3 mm) in the following year. To investigate this fault‐slip behavior, we conducted triaxial friction experiments on Pütürge fault gouge sampled from an outcrop exposure. The gouge, composed primarily of muscovite, quartz, and calcite, is velocity strengthening at conditions approximating 0–2.5 km depth and velocity weakening at 4–5 km depth. This transition to velocity‐weakening friction is associated with enhanced comminution and shear localization observed microstructurally. Our results suggest that depth‐dependent frictional stability of the Pütürge fault segment facilitates rupture nucleation and propagation at depth while maintaining rupture‐arresting behavior near Earth’s surface.

Pütürge segment of the East Anatolian Fault Zone↗
USGS2025

Per- and polyfluoroalkyl substances (PFAS) mass flux and mass balance at an aqueous film-forming foam release site in semiarid eastern New Mexico, USA

Passive flux meters (PFMs) directly measure groundwater chemistry mass flux and Darcy flux, providing insight into contaminant source-zone architecture and transport properties. This study uses PFMs to characterize PFAS flux in groundwater at a semiarid site with a thick (greater than 90-m) unsaturated zone where groundwater has been contaminated with per - and polyfluoroalkyl substances (PFAS) related to the use of aqueous film-forming foam (AFFF) for fire training and fire suppression. PFAS mass discharge (PFAS mass flux integrated over a control plane) in groundwater downgradient from several PFAS release areas is calculated using PFM results. In groundwater downgradient from fire-training areas, total PFAS mass discharge (summed across 14 compounds) was estimated to be between 6.0 and 31 g per day in 2020 and between 5.9 and 23 g per day in 2021. Site-specific documentation, generic information on AFFF properties, and literature values of PFAS concentration in AFFF are used to estimate site-specific PFAS-application rates at fire-training areas. These PFAS-application rates are compared to groundwater PFAS-discharge rates. Results suggest that transformation processes (exact pathways unknown) have led to increased discharge of measured PFAS in groundwater relative to initial AFFF formulations. The mass balance approach has broad applicability as a high-level approach that can provide insight into PFAS transport at AFFF sites.

New Mexico↗
USGS2025

Linking stream-reach nitrogen loads and groundwater “reachsheds” to inform wastewater-nitrogen management actions, Cape Cod, Massachusetts

Study Region Cape Cod, Massachusetts, U.S.A. Study Focus Anthropogenic nitrogen (N) is a key factor in degrading groundwater and surface-water quality, particularly in coastal New England where onsite wastewater systems are prevalent. This study evaluated whether direct N-load measurements in streams on Cape Cod, Massachusetts, coupled with flow-path information from groundwater-flow models, can effectively identify potential land areas where nitrogen mitigation could substantially reduce loads to receiving waters. Nitrogen fluxes were measured along 63 stream reaches during winter and summer and paired with simulated groundwater recharge areas to identify and rank potential areas for reduction of nonpoint-source N inputs. New Hydrologic Insights for the Region Reach-scale nitrate-N loads ranged from −39.1–1182 kg-N/yr per 100 m of stream, indicating spatially variable groundwater inputs across seasons. “Reachsheds” — areas contributing groundwater recharge to specific stream reaches — were delineated using a regional groundwater-flow model. Strong correlations were found between observed N loads and land-use characteristics, especially the number of septic systems and total N inputs from the sum of considered sources. Observed N loads were moderately correlated with recharge area size and wastewater flow estimates. Correlating reach-specific groundwater N loads with land use and parcel-scale nitrogen-yield data identified reachsheds with the highest potential for N load reduction. This approach enables targeted implementation of restoration efforts to optimize nutrient management and support regional load reduction.

Massachusetts↗
USGS2025

A probabilistic assessment methodology for the evaluation of geologic energy storage capacity—Natural gas storage in depleted hydrocarbon reservoirs

The need for energy storage, particularly underground, where capacity and duration may far exceed battery storage technologies, is especially relevant given the increasing demands for reliable power alongside the development of intermittent renewable electricity sources. Geologic energy storage facilities already exist, and expanded use would enable storing gases such as methane and hydrogen. In 2018, a National Academies of Sciences, Engineering, and Medicine report, “Future Directions for the U.S. Geological Survey's Energy Resources Program,” recommended that the U.S. Geological Survey (USGS) prioritize assessing underground energy storage in geologic formations in the United States. The U.S. Geological Survey has since developed a methodology for assessing natural gas storage capacities in depleted hydrocarbon reservoirs on a national scale. The methodology introduced in this report prescribes three approaches for calculating gas storage capacity. This methodology relies on the availability of input data, including cumulative hydrocarbon production records, reservoir petrophysical properties, and reservoir pressure data. Assessment inputs can be obtained from public, State-level databases and propriety national-scale databases, although the use of analogs could be warranted for estimating input parameters. Probabilistic assessment results are aggregated to play, petroleum province, regional, and national scales. The steps defined in this report are demonstrated on the Michigan Basin Province, which includes the Mississippian Sandstone Gas Play and the Clinton Structural Play. This methodology could be used to systematically and consistently assess hydrocarbon plays and provinces for natural gas storage capacity across the United States.

Michigan↗
USGS2024

Geospatial PDF map of the compilation of GIS data for the mineral industries and related infrastructure of Africa

Introduction In 2021, the U.S. Geological Survey's (USGS) National Minerals Information Center (NMIC) completed the project titled "Compilation of geospatial data for the mineral industries and related infrastructure of Africa." This project aimed to leverage the expertise and capabilities of the NMIC to collect, synthesize, and interpret geospatial data to inform on the extractive resources of the African region and expand the NMIC's understanding on the impact of mineral industry of African nations in the global economy. The African region, which comprises the independent nations that make up the African continent and its associated islands and dependencies, consists of a total of 58 mineral producing countries. The primary objective of this effort was to create a fully attributed Geographic Information System (GIS) portraying existing mining infrastructure, resources, and development capacity across Africa along with the related infrastructure capable of supporting current (for the reference year 2018) and future extractive industry operations in the region. The compiled GIS geodatabase with supporting documentation including comprehensive metadata was published as a USGS data release titled "Compilation of Geospatial Data (GIS) for the Mineral Industries and Related Infrastructure of Africa." This georeferenced portable document format (GeoPDF) map sheet presents a new geographic information product containing a partial representation of the GIS data. This GeoPDF map provides a visual comparison of the distribution of mineral industry and related infrastructure GIS data, which contributes to a deeper understanding of the intersections and complexities of the extractive industries within Africa.

Open-File Report↗
USGS2025

Case study of deep learning image segmentation for the purposes of rapid 2D petrographic analysis in volcanic rocks

Automation using deep learning methods is a useful alternative to manual methods of petrographic segmentation, but often requires user familiarity with coding and/or algorithms. We examine the Dragonfly TM program's deep learning tools for application by users with a variety of skill levels as a method for petrographic image segmentation. An image processing methodology, bimodal image stacking, was created for low-input-data, high-efficacy training of models which can then be applied to varied samples. Using backscatter electron images we show that the resulting model segmentations agree with manual segmentation total and modal crystallinity values within 5%, and calculated plagioclase crystal size distribution (CSD) values within 2σ, despite limitations in discriminating mafic phases. Model creation and training takes <24 hours, 1–3 hours of which are supervised, and the resultant model can then be applied to new uncharacterized samples in <15 minutes per image. This allows for non-experts to create and utilize deep learning models to segment images of variable brightness and texture, at low user-time cost and resulting in size and shape data which are within uncertainty of manual segmentation. While some limitations are noted (for example, sieve-textured phases may need manual correction, and different minerals with similar BSE intensity may not be resolved as separate phases), this methodology can be utilized for general application of models to wide ranges of volcanic crystalline and bubble textures, and to create a library of models for rapid petrological analysis during volcanic eruptions.

Alaska↗
USGS2026

Ground motions from finite faults with unknown geometry

Earthquake emergency response and loss modeling require accurate models of ground‐motion intensity metrics (IMs), such as those produced by ShakeMap. In the critical minutes and hours after an earthquake, however, knowledge of the earthquake source geometry limits the accuracy of these models, especially in areas where seismic instrumentation is insufficient to constrain the shaking intensity pattern. Previous attempts to overcome this limitation have centered on computing the mean distance metrics from a suite of assumed source geometries. That approach is inadequate with modern ground‐motion models (GMMs) because they typically include terms for the hanging wall effect, depth to top of rupture, and other nonlinear terms. Such approaches also propagate the distance uncertainty through the GMMs and may not properly allocate the additional uncertainty into the between‐ and within‐event components. Here we present Finite‐Fault SIMulation with Mixed Effects Regression (FFSIMMER), a method to address these limitations by computing IM distributions from a suite of rupture realizations that fully accounts for all geometry‐related GMM terms and allows for the separation of the between‐ and within‐event components of the total uncertainty. The accuracy of this method is limited by the available constraints on the source parameters. To address this, FFSIMMER can incorporate constraints based on knowledge of the source, such as the approximate strike and dip based on knowledge of the plate tectonics and focal mechanism of the earthquake. We demonstrate the improvement in accuracy that can be achieved with the 2025 M 7.7 Mandalay, Burma (Myanmar), earthquake by incorporating constraints on the range of plausible source parameters.

Bulletin of the Seismological Society of America↗
USGS2026

Revisiting the utility of regional-scale, high-quality geophysical data in mineral exploration - A case study featuring the Mammoth Magnetic Anomaly, Pinal County, Arizona

Regional aeromagnetic surveys passively measure the total magnetic intensity (TMI) and are a foundational tool used in mineral exploration (Airo, 2015). With the increased global demand and the number of critical mineral resources required for manufacturing high-tech devices, developing high-quality, regional-scale geophysical surveys could aid critical mineral exploration efforts and geologic mapping. In 2019, the U. S. Geological Survey launched the Earth Mapping Resources Initiative (Earth MRI) to modernize the geologic and geophysical mapping of regions that have the potential to contain critical mineral resources within the United States. In support of planning Earth MRI geophysical surveys, Drenth and Grauch (2019) defined five aeromagnetic data quality rankings (rank 1 through rank 5) applying them to the airborne geophysical survey inventory of the United States (Johnson et al., 2021). Rank 1 aeromagnetic surveys are of the highest quality, meeting modern standards and allowing best practices for qualitative and quantitative interpretation; whereas rank 5 aeromagnetic surveys are of the lowest quality, being useful only for qualitative interpretation of broad features. Through the Earth MRI effort, 48 high-quality, regional-scale rank 1 and 2 airborne magnetic and radiometric geophysical surveys have been planned, collected, or publicly release through May 2025 (U. S. Geological Survey, 2025). Here, a portion of a rank 1 Earth MRI aeromagnetic survey in southeast Arizona is presented and compared to a legacy rank 5 aeromagnetic survey over the Mammoth Magnetic Anomaly (MMA), demonstrating how modern, high-quality aeromagnetic data improves our view of crustal geology, aiding mineral exploration.

Arizona↗