USGS Science⌕ Search

SEARCH · USGS Science

Results for “Marine Geology”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17Linked to original sources
USGS2005

Geology and tsunamigenic potential of submarine landslides in Santa Barbara Channel, Southern California

A large submarine landslide complex and four small landslides developed under the Santa Barbara Channel, suggesting a potential hazard from landslide-generated tsunamis. We integrate offshore stratigraphy and geologic structure, multibeam bathymetric information, and several kinds of seismic-reflection data to understand how and when the submarine landslides formed. Seismic-reflection data show that mass failure along the slope began at least 200 ka ago. Landslides appear as zones of poor reflectivity having an irregular upper surface, and these zones alternate vertically with strong parallel reflections. The emplacement ages of two of the three main landslide lobes are well established at 8 and 10 ka. The source material for the youngest part of the landslide complex was sediment of probable late Pleistocene and Holocene age that accumulated in a shelf-edge delta. Directly under this delta, growth of faults and anticlines was particularly intense and tended to oversteepen the deltaic deposits. These active structures also formed migration pathways and reservoirs for aqueous and hydrocarbon fluids from the deep basin. Tsunami deposits have been described from a low-lying area near Santa Barbara, and numerical modeling of tsunamis generated by hypothetical landslides in Santa Barbara Channel indicates a moderate to severe threat [Borrero, J.C., Dolan, J.F. and Synolakis, C.E., 2001. Tsunamis within the eastern Santa Barbara Channel. Geophys. Res. Lett., 28(4): 643-646.], involving wave runups of 2-20 m, for a range of assumed landslide volumes. Inundation from these waves, however, is expected to be highly focused so that only narrow (???10-km) sections of the shoreline would be affected. Crown Copyright ?? 2005 Published by Elsevier B.V. All rights reserved.

Marine Geology↗
USGS1982

Active geologic processes in Barrow Canyon, northeast Chukchi Sea

Circulation patterns on the shelf and at the shelf break appear to dominate the Barrow Canyon system. The canyon's shelf portion underlies and is maintained by the Alaska Coastal Current (A.C.C.), which flows northeastward along the coast toward the northeast corner of the broad Chukchi Sea. Offshelf and onshelf advective processes are indicated by oceanographic measurements of other workers. These advective processes may play an important role in the production of bedforms that are found near the canyon head as well as in processes of erosion or non-deposition in the deeper canyon itself. Coarse sediments recovered from the canyon axis at 400 to 570 m indicate that there is presently significant flow along the canyon. The canyon hooks left at a point north of Point Barrow where the A.C.C. loses its coastal constriction. The left hook, as well as preferential west-wall erosion, continues down to the abyssal plain of the Canada Basin at 3800 m. A possible explanation for the preferential west-wall erosion along the canyon, at least for the upper few hundred meters, is that the occasional upwelling events, which cause nutrient-rich water to flow along the west wall would in turn cause larger populations of burrowing organisms to live there than on the east wall, and that these organisms cause high rates of bioerosion. This hypothesis assumes that the dominant factor in the canyon's erosion is biological activity, not current velocity. Sedimentary bedforms consisting of waves and furrows are formed in soft mud in a region on the shelf west of the canyon head; their presence there perhaps reflects: (a) the supply of fine suspended sediments delivered by the A.C.C. from sources to the south, probably the Yukon and other rivers draining northwestern Alaska; and (b) the westward transport of these suspended sediments by the prevailing Beaufort Gyre which flows along the outer shelf.

Alaska↗
USGS2000

Sediment distribution and transport along a rocky, embayed coast: Monterey Peninsula and Carmel Bay, California

Field measurements of beach morphology and sedimentology were made along the Monterey Peninsula and Carmel Bay, California, in the spring and summer of 1997. These data were combined with low-altitude aerial imagery, high-resolution bathymetry, and local geology to understand how coastal geomorphology, lithology, and tectonics influence the distribution and transport of littoral sediment in the nearshore and inner shelf along a rocky shoreline over the course of decades. Three primary modes of sediment distribution in the nearshore and on the inner shelf off the Monterey Peninsula and in Carmel Bay were observed. Along stretches of the study area that were exposed to the dominant wave direction, sediment has accumulated in shore-normal bathymetric lows interpreted to be paleo-stream channels. Where the coastline is oriented parallel to the dominant wave direction and streams channels trend perpendicular to the coast, sediment-filled paleo-stream channels occur in the nearshore as well, but here they are connected to one another by shore-parallel ribbons of sediment at depths between 2 and 6 m. Where the coastline is oriented parallel to the dominant wave direction and onshore stream channels are not present, only shore-parallel patches of sediment at depths greater than 15 m are present. We interpret the distribution and interaction or transport of littoral sediment between pocket beaches along this coastline to be primarily controlled by the northwest-trending structure of the region and the dominant oceanographic regime. Because of the structural barriers to littoral transport, peaks in wave energy appear to be the dominant factor controlling the timing and magnitude of sediment transport between pocket beaches, more so than along long linear coasts. Accordingly, the magnitude and timing of sediment transport is dictated by the episodic nature of storm activity. (C) 2000 Elsevier Science B.V.

Marine Geology↗
USGS1999

Potential geologic hazards on the eastern Gulf of Cadiz slope (SW Spain)

Geologic hazards resulting from sedimentary, oceanographic and tectonic processes affect more than one third of the offshore Gulf of Cadiz, and are identified by interpreting high-resolution seismic profiles and sonographs. Hazards of sedimentary origin include the occurrence of slope instability processes in the form of single or multiple slumps occupying up to 147 km2 mainly concentrated in the steeper, upper slope area. Besides the presence of steep slopes, the triggering of submarine landslides is probably due to seismic activity and favoured by the presence of biogenic gas within the sediment. Gassy sediments and associated seafloor pockmarks cover more than 240 km2 in the upper slope. Hazards from oceanographic processes result from the complex system of bottom currents created by the interaction of the strong Mediterranean Undercurrent and the rough seafloor physiography. The local intensification of bottom currents is responsible for erosive processes along more than 1900 km2 in the upper slope and in the canyons eroded in the central area of the slope, undermining slopes and causing instability. The strong bottom currents also create a mobile seafloor containing bedforms in an area of the Gulf that extends more than 2500 km2, mostly in the continental slope terraces. Hazards of tectonic origin are important because the Gulf of Cadiz straddles two major tectonic regions, the Azores-Gibraltar fracture zone and the Betic range, which results in diapir uplift over an area of more than 1000 km2, and in active seismicity with earthquakes of moderate magnitude. Also, tsunamis produced by strong earthquakes occur in the Gulf of Cadiz, and are related to the tectonic activity along the Azores-Gibraltar fracture zone.

Marine Geology↗
USGS2002

Influence of fluvial processes on the quaternary geologic framework of the continental shelf, North Carolina, USA

Digital, single-channel, high-resolution seismic reflection profiles were acquired from the insular continental shelf of North Carolina, USA along a data grid extending from Oregon Inlet northward 48 km to Duck, North Carolina and from the nearshore zone seaward approximately 28 km (total surveyed area= 1334 km2). These data were processed and interpreted to delineate principal reflecting horizons and develop a three-dimensional seismic stratigraphic framework for the continental shelf that was compared to stratigraphic data from the shoreward back-barrier (estuarine) and barrier island system. Six principal reflecting horizons (designated R0 through R5) were present within the upper 60 m of the shelf stratigraphic succession. Three-dimensional mapping of reflector R1 demonstrated its origin from fluvial incision of the continental shelf during an episode (or episodes) of lowered sea-level. Fluvial processes during development of reflector R1 were responsible for extensive reworking and re-deposition of sediment throughout most of the northern half of the study area. Five seismic stratigraphic units (designated S1 through S5) were tentatively correlated with depositional sequences previously identified from the North Carolina back-barrier (estuarine) and barrier island system. These five stratigraphic units span the Quaternary Period (S1 = early Holocene; S2 = 51-78 ka; S3 = 330-530 ka; S4 = 1.1-1.8 Ma; S5 = earliest Pleistocene). Unit S1 is composed of fine-grained fluvial/estuarine sediment that back-filled incised streams during early Holocene sea-level rise. The four other stratigraphic units (S2-S5) display tabular depositional geometries, low total relief, and thicken toward the east-southeast as their basal reflectors dip gently between 0.41 m km-1 (0.02??) and 0.54 m km-1 (0.03??). Knowledge of the three-dimensional subsurface stratigraphic architecture of the continental shelf enhances understanding of the development of shelf depositional successions and provides a framework for development of better Quaternary sea-level data, especially offshore North Carolina where such data are sparse. ?? 2002 Elsevier Science B.V. All rights reserved.

Marine Geology↗
USGS2005

Simulating the evolution of coastal morphology and stratigraphy with a new morphological-behaviour model (GEOMBEST)

A new morphological-behaviour model is used to simulate evolution of coastal morphology associated with cross-shore translations of the shoreface, barrier, and estuary. The model encapsulates qualitative principles drawn from established geological concepts that are parameterized to provide quantitative predictions of morphological change on geological time scales (order 10 3 years), as well as shorter time scales applicable for long-term coastal management (order 101 to 102 years). Changes in sea level, and sediment volume within the shoreface, barrier, and estuary, drive the model behaviour. Further parameters, defining substrate erodibility, sediment composition, and time-dependent shoreface response, constrain the evolution of the shoreface towards an equilibrium profile. Results from numerical experiments are presented for the low-gradient autochthonous setting of North Carolina and the steep allochthonous setting of the Washington shelf. Simulations in the Currituck region of North Carolina examined the influence of sediment supply, substrate composition, and substrate erodibility on barrier transgression. Results demonstrate that the presence of a lithified substrate reduces the rate of barrier transgression compared to scenarios where an erodible, sand-rich substrate exists. Simulations of the Washington coast, 20 km north of the Columbia River, confirmed that the model can reproduce complex stratigraphy involving regressive and transgressive phases of coastal evolution. Results suggest that the first major addition of sediment to the shelf occurred around 12 900 years ago and resulted from the rapid addition of sediment volume from the Columbia River attributed to the Missoula floods. This was followed by a period where little or no sediment was added (12 400-9100 BP) and a third period when most sediment was added to the shelf (9100 BP to present) from the Columbia River. Comparing results from each setting demonstrates an indirect control that substrate slope has on shoreface transgression rates. Shoreface transgression is shown to be sensitive to the rate of estuarine sedimentation, with the sensitivity increasing as substrate slope decreases.

North Carolina↗
USGS1968

Geologic history of the continental margin of North America in the Bering Sea

The North American continental margin beneath the Bering Sea is nearly 1,300 km long and extends from Alaska to eastern Siberia. The margin is a canyon-scarred 3,200–3,400-m high escarpment separating one of the world's largest epicontinental seas (the shallow Bering Sea) and the Aleutian Basin (the deep-water Bering Sea), a marginal oceanic basin distinguished by having its southern boundary formed by the Aleutian Ridge. Three geomorphic provinces can be recognized: a southeastern province characterized by a gentle continental slope (lacking V-shaped canyons) and an outlying continental borderland (formed by Umnak Plateau); a central province distinguished by a steep canyon-scarred slope, and a northwestern province having a gentler and, apparently, less eroded continental slope. Continuous seismic reflection profiles show that the margin is constructed of three major structural-stratigraphic units: ( 1 ) an acoustic basement underlying the outer shelf and upper slope; ( 2 ) an overlying main layered sequence; and ( 3 ) a stratified rise unit underlying and forming the continental rise at the base of the slope. The existing margin evolved with downbowing and faulting of the acoustic basement, an older margin probably of Late Mesozoic age, consisting in part of well-indurated siltstone and mudstone, in Early Tertiary time. Concomitant with subsidence as much as 1,500 m of main-layered-sequence strata were draped over the basement. Intense canyon cutting, presumed to have been caused by the rapid deposition of unstable masses of riverborn sediment over the outer shelf and upper slope, is thought to have begun in Late Tertiary and Quaternary time. Concurrent with canyon cutting, submarine fans, consisting of turbidites forming the rise unit, accrued at the base of the continental slope. Subsidence of the continental margin during the Tertiary may be related to foundering (“oceanization”) of a continental block to form the Aleutian Basin, or to simple isostatic depression of a former segment of the North Pacific oceanic floor in response to sediment infilling north of the Aleutian Ridge.

Marine Geology↗
USGS1980

Sedimentary and structural patterns on the northern Santa Rosa-Cortes Ridge, southern California

The Santa Rosa-Cortes Ridge is an 1800 m high, 180 km long feature lying approximately 90 km off the coast of southern California and directly south of the northern group of Channel Islands. Geophysical profiling and sampling cruises to the northern part of the ridge, an area of recent and future lease sales for petroleum development, provide a strong data base for interpretation of structural and sedimentary patterns and their relation to potential geologic hazards. The northern part of the ridge is a complexly folded and faulted northwest-trending anticlinorium composed mostly of lower and middle Miocene shale and mudstone. Erosional remnants of upper Miocene and Pliocene rocks unconformably overlie highly folded pre-upper Miocene strata. The major structure of the ridge developed almost continuously from Oligocene or early Miocene time to the end of the Tertiary; many small folds formed between post-late Miocene and pre-late Pleistocene time. Numerous small faults cut the rocks on the ridge top. Faults cut basement rocks on the west side of the ridge along the Ferrelo fault zone. Published data on historical epicenters and evidence of offsets on the seafloor from seismic reflection and side-scan profiles, including limited evidence of possible strike-slip movement along fault traces, indicate that the northern Santa Rosa-Cortes Ridge is tectonically active. The crest of the ridge was truncated as the result of repeated sea-level fluctuations in the Quaternary. A thin veneer of unconsolidated medium to fine sand, less than 3 m thick, mantles most of the ridge; locally in topographically low areas and on the upper flanks of the ridge, thickness exceeds 20 m. The meager sediment cover, coupled with available evidence of relatively strong currents flowing across the ridge top, indicate that the ridge is an area of nondeposition or winnowing of fine sediments. Modern sediments become thicker and finer-grained from the ridge top to the ridge flanks, suggesting active accretion in those areas. Slumps are present at various depths on the flanks, and it seems probable that the thicker deposits (> 20 m) of modern sediments on the upper flanks will be sites of future slumping.

California↗
USGS1996

Seafloor environments in Cape Cod Bay, a large coastal embayment

Cape Cod Bay is a glacial, semi-enclosed embayment that has a patchy distribution of modern seafloor sedimentary environments of erosion or nondeposition, deposition, and sediment reworking. Sidescan-sonar records and supplemental bathymetric, sedimentary, subbottom, and physical-oceanographic data indicate that the characteristics and distribution of these three categories of bottom environments are controlled by a combination of geologic and oceanographic processes that range from episodic to long-term and from regional to local. (1) Environments of erosion or nondeposition comprise exposures of bedrock, glacial drift, and coarse lag deposits that contain sediments (where present) ranging from boulder fields to gravelly coarse-to-medium sands. These environments are dominant on the shallow margins of the bay (water depths < 30 m) where they reflect sediment resuspension, winnowing, and transport during modern northerly storms. (2) Environments of deposition are blanketed by fine-grained sediments ranging from muds to muddy fine sands. These environments are dominant across the floor of the central basin (water depths = 30–60 m) where fine-grained sediments (derived from regional and local sources and emplaced primarily during episodic wind- and density-driven flow) settle through the water column and accumulate under weak bottom currents during nonstorm conditions. (3) Environments of sediment reworking contain patches with diverse textures ranging from gravelly sands to muds. These environments occupy much of the transitional slopes between the margins and the basin floor and reflect a combination of erosion and deposition. The patchy distribution of sedimentary environments within the bay reflects not only regional changes in processes between the margins and the basin but local changes within each part of the bay as well. Small-scale patchiness is caused by local changes in the strengths of wave- and wind-driven currents and (on the margins) by local variations in the supply of fine-grained sediments. This study indicates areas within Cape Cod Bay where fine-grained sediments and associated contaminants are likely to be either moved or deposited. It also provides a guide to the locations and variability of benthic habitats.

Cape Cod Bay↗
USGS1980

Sediment transport in Norton Sound, Alaska

The Yukon River, the largest single source of Bering Sea sediment, delivers > 95% of its sediment load at the southwest comer of Norton Sound during the ice-free months of late May through October. During this period, surface winds in the northern Bering Sea area are generally light from the south and southwest, and surface waves are not significant. Although wind stress may cause some transport of low-density turbid surface water into the head of Norton Sound, the most significant transport of Yukon River suspended matter occurs within advective currents flowing north across the outer part of the sound. The thickest accumulations of modern Yukon silt and very fine sand occur beneath this persistent current. We monitored temporal variations in bottom currents, pressure, and suspended-matter concentrations within this major transport pathway for 80 days in the summer of 1977 using a Geological Processes Bottom Environmental (GEOPROBE) tripod system. The record reveals two distinctive periods of bottom flow and sediment transport: an initial 59 days (July 8–September 5) of fair-weather conditions, characterized by tidally dominated currents and relatively low, stable suspended-matter concentrations; and a 21-day period (September 5–September 26) during which several storms traversed the northern Bering Sea, mean suspended-matter concentrations near the bottom increased by a factor of five, and the earlier tidal dominance was overshadowed by wind-driven and oscillatory wave-generated currents. Friction velocities (u * ) at the GEOPROBE site were generally subcritical during the initial fair-weather period. In contrast, the 21-day stormy period was characterized by uFriction velocities (u * ) at the GEOPROBE site were generally subcritical during the initial fair-weather period. In contrast, the 21-day stormy period was characterized by u * values that exceeded the critical level of 1.3 cm/s more than 60% of the time. The GEOPROBE data suggest that the very fine sand constituting about 50% of the sediment on the outer part of the Yukon prodelta is transported during a few late-summer and fall storms each year. A conservative estimate shows that suspended-matter transport during the storms in September 1977 was equal to four months of fair-weather transport. values that exceeded the critical level of 1.3 cm/s more than 60% of the time. The GEOPROBE data suggest that the very fine sand constituting about 50% of the sediment on the outer part of the Yukon prodelta is transported during a few late-summer and fall storms each year. A conservative estimate shows that suspended-matter transport during the storms in September 1977 was equal to four months of fair-weather transport.

Alaska↗
USGS2002

Flow and sediment suspension events on the inner shelf of central California

The US Geological Survey conducted a field experiment in the late spring and early summer of 1998 off northern Santa Cruz County, California, to study sediment fluxes along the central California shelf. As part of this study, a bottom-mounted instrument package was deployed in a sediment-filled paleo-stream channel (h=12 m) off a pocket beach to measure waves, currents, suspended-sediment concentration, temperature, salinity, and seabed-level changes. The observations of suspended-sediment concentration revealed intermittent, intense periods of sediment suspension near the bed that were associated with the passage of individual large waves or wave groups. We used an ensemble averaging technique to characterize the temporal structure of near-bed sediment suspension events (SSEs) defined as when the near-bed instantaneous concentration exceeded the mean by three standard deviations. During the 800 h of deployment, over 9500 SSEs occurred. The 3917 SSEs that began under onshore flow were found to have a different temporal structure than the 5650 events that began during offshore flow. The longer mean duration of the onshore flow events caused an average of 83% of the sediment suspended during the course of the events to be carried offshore after the reversal of flow. All of the sediment suspended during the offshore events was carried offshore due to the shorter mean duration of these events. SSEs are shown to contribute 12% on average and up to 95% of the total sediment suspended by mass, demonstrating the importance of these events to sediment transport in this type of environment. Suspended-sediment transport models developed for the shelf, which use the product of the mean current and the mean suspended-sediment concentration, cannot accurately model the magnitude and direction of suspended-sediment transport on this energetic inner shelf due to the lack of information regarding the instantaneous coupling between fluid flow and sediment suspension. We conclude that time-variant models must be used to accurately model suspended-sediment transport in this type of environment.

California↗
USGS1989

Geologic framework of the offshore region adjacent to Delaware

Several multichannel, common depth point (CDP) seismic reflection profiles concentrated in the area of the entrance to Delaware Bay provide a tie between the known onshore geology of the Coastal Plain of Delaware and the offshore geology of the Baltimore Canyon Trough. The data provide a basis for understanding the geologic framework and petroleum resource potential of the area immediately offshore Delaware. Our research has focused on buried early Mesozoic rift basins and their geologic history. Assuming that the buried basins are analogous to the exposed Newark Supergroup basins of Late Triassic-Early Jurassic age, the most likely possibility for occurrence of hydrocarbon source beds in the area of the landward margin of the Baltimore Canyon Trough is presumed to be lacustrine, organic-rich shales probably present in the basins. Although buried basins mapped offshore Delaware are within reach of drilling, no holes have been drilled to date; therefore, direct knowledge of source, reservoir, and sealing beds is absent. Buried rift basins offshore Delaware show axial trends ranging from NW-SE to NNE-SSW. Seismic reflection profiles are too widely spaced to delineate basin boundaries accurately. Isopleths of two-way travel time representing basin fill suggest that, structurally, the basins are grabens and half-grabens. As shown on seismic reflection profiles, bounding faults of the basins intersect or merge with low-angle fault surfaces that cut the pre-Mesozoic basement. The rift basins appear to have formed by Mesozoic extension that resulted in reverse motion on reactivated basement thrust faults that originated from compressional tectonics during the Paleozoic. Computer-plotted structure contour maps derived from analysis of seismic reflection profiles provide information on the burial history of the rift basins. The postrift unconformity bevels the rift basins and, in the offshore area mapped, ranges from 2000 to 12,000 m below present sea level. The oldest postrift sediments that cover the more deeply buried rift basins are estimated to be of Middle Jurassic age (Bajocian-Bathonian), the probable time of opening of the Atlantic Ocean basin and onset of continental drift about 175–180 m.y. ago. By late Oxfordian-early Kimmeridgian time, the less deeply buried basins nearshore Delaware had been covered. A time-temperature index of maturity plot of one of the basins indicates that only dry gas would be present in reservoirs in synrift rocks buried by more than 6000 m of postrift sediments and in the oldest (Bathonian?-Callovian?) postrift rocks. Less deeply buried synrift rocks landward of the basin modeled might still be within the oil generation window.

Marine Geology↗
USGS2020

Changes in sediment source areas to the Amerasia Basin, Arctic Ocean, over the past 5.5 million years based on radiogenic isotopes (Sr, Nd, Pb) of detritus from ferromanganese crusts

Ferromanganese (FeMn) crusts provide a useful paleoenvironmental archive for studying the poorly understood climatic, oceanographic, and geologic evolution of the Arctic Ocean. This study is based on the identification and temporal reconstruction of sources and inferred transport pathways of terrigenous material in FeMn crusts collected from several sites across the Amerasia Basin. Samples from the Alpha Ridge (AR), Mendeleev Ridge (MR), and Chukchi Borderland (CB) have similar chemical compositions and high detrital contents. Sr, Nd, and Pb isotopic compositions of the terrigenous detritus extracted from the FeMn crust layers show spatial and temporal variability due to the variable proportions of inputs from the North American and East Siberian margins and local submarine outcrops. The temporal resolution is restricted by macroscopic crust layers, which represent times of significant changes in the depositional environment and are used to study first-order environmental changes. During the period of ca. 4.4 to 3.8 Myr ago, detritus in the MR area was derived mostly from the Laptev Sea. Then, until about 1.3 Myr ago, FeMn crusts from MR received a higher volcanic component sourced from the East Siberian Sea, with mixing of detritus from the Okhotsk-Chukotka volcanic belt (OCVB) area and possibly weathering of local MR outcrops, which is mostly High Arctic Large Igneous Province (HALIP) rocks. The period from about 1.3 Myr ago to the present reflects enhanced contributions of detritus from the Canadian Shield, approximately equal to the East Siberian contribution for the MR area. CB crusts show three main periods of distinct detrital input. During the period ca. 5.5–5.0 Myr ago, CB detritus was sourced from local submarine outcrops of the Jurassic-Cretaceous HALIP rocks and possibly from northeast Siberia, including OCVB rocks, while during the period from about 5.0 to 3.6 Myr ago, the CB FeMn crusts had a much greater input of detritus from the North American margin. After 3.6 Myr ago, the CB detritus shows a mixed composition predominantly sourced from North America with some material transported from the Bering Sea and smaller contributions from northeast Siberia. The AR crust was influenced mostly by detritus sourced from the Canadian Shield. This study shows that FeMn crusts from the Arctic ocean are a useful tool and archive for climate reconstruction and depositional history of this polar region.

Marine Geology↗
USGS1997

Shallow subsurface geology of the continental shelf, Gulf of the Farallones, California, and its relationship to surficial seafloor characteristics

The Gulf of the Farallones is located on a continental margin that is tectonically active and has experienced eustatic fluctuations of sea level throughout the Quaternary. Bathymetry of the Gulf suggests that it is different from the average continental shelf off California in that instead of a seafloor that slopes gently seaward from the shoreline to the shelf edge (dominantly west to southwest), much of the Gulf shelf slopes to the northwest, a direction that is subparallel to that of the adjacent mainland shoreline. Isobaths are oblique to shore-normal for much of the Gulf shelf as opposed to the more typical shore-parallel isobaths. This northwest trend is parallel to that of the offshore granitic outcrops, the Farallon Island ridge and Cordell Bank. 3.5 kHz shallow subsurface profiles show a regional unconformity (basal unconformity of this study) that truncates bedrock and typically is overlain by a very thin veneer (1-2 m or less) of acoustically transparent unconsolidated sediment. In places, the basal unconformity appears to be coincident with the seafloor. Where the basal unconformity is within 1-2 m of the seafloor, side-scan sonar reveals that either bedrock pierces the seafloor or numerous linear depressions dissect the shelf seafloor. Side-scan sonar shows that the central part of the study area is characterized by numerous linear depressions that are on the order of 1-3 m deep, several meters to 5 km in length, and from 250 m to 2 km in width. The only Holocene unconsolidated sediment in excess of 1-2 m that has accumulated on the Gulf shelf is located where the bedrock surface is topographically depressed. The topographic lows are situated south of the Point Reyes headland and southwest of the Golden Gate. The sediment deposits that overlie these lows attain thicknesses up to 15-20 m; however, their average thickness is less than 10 m. Structure contours on the basal unconformity surface, essentially the top of the bedrock platform, also show that it is topographically high at its southern end and low at its northern end; the slope of the platform is therefore to the northwest. The seafloor mimics the attitude of the bedrock platform owing to the lack of appreciable sediment cover and hence also slopes northwest. This accounts for the oblique to shore-normal orientation of isobaths in the Gulf and the northwestward slope of the seafloor. The results of this investigation suggest that eustatic sea level fluctuations in conjunction with local tectonics had a profound effect on the deposition, erosion, and preservation of sediment on the Gulf shelf throughout the Quaternary and that the shallow subsurface greatly influences many aspects of the present surficial morphology.

Marine Geology↗
USGS2010

Historical evolution of the Columbia River littoral cell

This paper details the historical coastal evolution of the Columbia River littoral cell in the Pacific Northwest of the United States. Geological data from A.D. 1700 and records leading up to the late 1800s provide insights to the natural system dynamics prior to significant human intervention, most notably jetty construction between 1885 and 1917. All reliable surveys, charts, and aerial photos are used to quantify decadal-scale changes at the three estuary entrances and four sub-cells of the littoral cell. Shoreline, bathymetric, and topographic change over three historical intervals—1870s–1920s, 1920s–1950s, and 1950s–1990s—are integrated to provide an understanding of sediment-sharing relationships among the littoral cell components. Regional morphological change data are developed for alongshore segments of approximately 5 km, enabling comparisons of shoreline change to upper-shoreface and barrier volume change within common compartments. The construction of entrance jetties at the Columbia River (1885–1917) and Grays Harbor (1898–1916) has profoundly affected the evolution of the littoral cell, and has accentuated the morphological coupling between the inlets, ebb-tidal deltas, shorefaces, and barriers. The jetties induced erosion of the inlets and offshore migration of ebb-tidal deltas. The change in boundary conditions at the entrances enabled waves to rework the flanks of ebb-tidal deltas and supply enormous quantities of sand to the adjacent coasts. Over several decades the initial sand pulses have been dispersed alongshore up to tens of kilometers from the estuary entrances. Winter waves and coastal currents produce net northward sediment transport across the shoreface while summer conditions tend to induce onshore sediment transport and accumulation of the upper shoreface and barriers at relatively high rates. Historical shoreline progradation rates since jetty construction are approximately double the late prehistoric rates between 1700 and the 1870s. Erosion rates of the mid- to lower shoreface to the south of the jettied estuary entrances have typically been greater than the accumulation rates of the upper shoreface and barrier, suggesting that the lower shoreface has been an important source of littoral sediments over decadal and longer time scales. Until recent decades, sediment supply from the ebb-tidal delta flanks and lower shoreface has largely masked the decline in Columbia River sediment supply resulting from flow regulation and dredging disposal practices. With the contemporary onset and expansion of coastal erosion adjacent to the jettied estuary entrances, proper management of dredged sediment is imperative to mitigate the effects of a declining sediment budget.

Oregon, Washington↗
USGS1976

Late Pleistocene and Holocene depositional trends, processes, and history of Astoria deep-sea fan, Northeast Pacific

The asymmetrical Astoria Fan (110 × 180 km) developed off the Columbia River and Astoria submarine canyon during the Pleistocene. Morphology, stratigraphy, and lithology have been outlined for a Pleistocene turbidite, and a Holocene hemipelagic sedimentary regime to generate geologically significant criteria for comparison with ancient equivalent deposits. Both gray silty clay of the Late Pleistocene and olive-gray clay of the Early Holocene are interrupted by turbidites. The few deeply incised fan valleys of the more steeply sloping upper fan contain thick, muddy and very poorly sorted sand and gravel beds that usually have poorly developed internal sedimentary structures. The numerous shallower fan valleys and distributaries of the flatter middle and lower fan contain thick, clean, and moderately sorted medium to fine sands that are vertically graded in texture, composition and well-developed internal sedimentary structures. Tuffaceous turbidites (containing Mazama ash, 6600 B.P.) can be traced as thick deposits (ca. 30–40 cm) throughout the Astoria Channel system and as thin correlative interbeds (ca. 1–2 cm) in interchannel areas. Similarly, sand/shale ratios are high throughout the fan valleys and the middle and lower fan areas of distributaries, but are low in the upper-fan interchannel areas. These depositional trends indicate that high-density turbidity currents carry coarse traction loads that remain confined in upper but not lower fan valleys. Fine debris selectively sorts out from channelized flows into overbank suspension flows that spread over the fan and deposit clayey silt. A high content of mica, plant fragments, and glass shards (if present) characterizes deposits of the overbank flows, a major process in the building of upper fan levees and interchannel areas. In the Late Pleistocene, turbidity currents funneled most coarse-grained debris through upper channels to depositional sites in middle and lower fan distributaries that periodically shifted, anastomosed and braided to spread sand layers throughout the area. At this time, depositional rates were many times greater (>50 cm/1000 years) than in the Holocene (8 cm/1000 years). During the Holocene rise of sea level, the shoreline shifted, the Columbia River sediment was trapped, and turbidity-current activity slackened from one major event per 6 years in the Late Pleistocene, to one per 1000 years in the Early Holocene, to none since the Mt. Mazama eruption (ca. 6600 B.P.). Turbidites became muddier and deposited as thick beds within main channels, in part explaining Holocene deposition rates three times greater there (25 cm/1000 years) than in interchannel regions. Turbid-layer debris, funneled through channel systems and trapped from flows off the continental terrace, also contributed to rapid sedimentation in valleys; however, less than 2% of the suspended sediment load of the Columbia River has been trapped in fan valleys during the Holocene. By the Late Holocene, continuous particle-by-particle deposition of hemipelagic clay with a biogenous coarse fraction was the predominant process on the fan. These hemipelagites contain progressively more clay size and less terrigenous debris offshore, and are finer grained, richer in planktonic tests and dominated by radiolarians compared to the foraminiferal-rich Pleistocene clays. The hemipelagic sedimentation of interglacial times, however, is insignificant compared to turbidite deposition of glacial times.

Oregon, Washington↗
USGS1969

Beach lamination: Nature and origin

A distinctive two-fold sedimentation unit characterizes lamination in the upper swash zone of beaches. Within the unit a fine and/or a heavy mineral rich layer at the base grades upward into a coarser and/or a heavy mineral poor layer at the top. This distinctive type of lamination results from grain segregation within bed flow during wave backwash.

Marine Geology↗
USGS1970

Submarine basalt from the Revillagigedo Islands region, Mexico

Ocean-floor dredging and submarine photography in the Revillagigedo region off the west coast of Mexico reveal that the dominant exposed rock of the submarine part of the large island-forming volcanoes (Roca Partida and San Benedicto) is a uniform alkali pillow basalt; more siliceous rocks are exposed on the upper, subaerial parts of the volcanoes. Basalts dredged from smaller seamounts along the Clarion fracture zone south of the Revillagigedo Islands are tholeiitic pillow basalts. Pillows of alkali basalts are more vesicular than Hawaiian tholeiitic pillows collected from the same depths. This difference probably reflects a higher original volatile content of the alkali basalts. Manganese-iron oxide nodules common in several dredge hauls generally contain nucleii of rhyolitic pumice or basalt pillow fragments. The pumice floated to its present site from subaerial eruptions, became waterlogged and sank, and was then coated with manganese-iron oxides. The thickness of palagonite rinds on the glassy pillow fragments is proportional to the thickness of manganese-iron oxide layers, and both are a measure of the age of the nodule. Both oldest basalts (10–100 m.y.) and youngest (less than 1 m.y.) are along the Clarion fracture zone, whereas basalts from Roca Partida and San Benedicto volcanoes are of intermediate age.

Marine Geology↗