USGS Science⌕ Search

SEARCH · USGS Science

Results for “Journal of Petrology”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17Linked to original sources
USGS2008

One-dimensional thermal modelling of Acadian metamorphism in southern Vermont, USA

One-dimensional thermal (1DT) modelling of an Acadian (Devonian) tectonothermal regime in southern Vermont, USA, used measured metamorphic pressures and temperatures and estimated metamorphic cooling ages based on published thermobarometric and geochronological studies to constrain thermal and tectonic input parameters. The area modelled lies within the Vermont Sequence of the Acadian orogen and includes: (i) a western domain containing garnet-grade pre-Silurian metasedimentary and metavolcanic rocks from the eastern flank of an Acadian composite dome structure (Rayponda-Sadawga Dome); and (ii) an eastern domain containing similar, but staurolite- or kyanite-grade, rocks from the western flank of a second dome structure (Athens Dome), approximately 10 km farther east. Using reasonable input parameters based on regional geological, petrological and geochronological constraints, the thermal modelling produced plausible P-T paths, and temperature-time (T-t) and pressure-time (P-t) curves. Information extracted from P-T-t modelling includes values of maximum temperature and pressure on the P-T paths, pressure at maximum temperature, predicted Ar closure ages for hornblende, muscovite and K-feldspar, and integrated exhumation and cooling rates for segments of the cooling history. The results from thermal modelling are consistent with independently obtained pressure, temperature and Ar cooling age data on regional metamorphism in southern Vermont. Modelling results provide some important bounding limits on the physical conditions during regional metamorphism, and indicate that the pressure contemporaneous with the attainment of peak temperature was probably as much as 2.5 kbar lower than the actual maximum pressure experienced by rocks along various particle paths. In addition, differences in peak metamorphic grade (garnet-grade versus staurolite-grade or kyanite-grade) and peak temperature for rocks initially loaded to similar crustal depths, differences in calculated exhumation rates, and differences in 40Ar/39Ar closure ages are likely to have been consequences of variations in the duration of isobaric heating (or 'crustal residence periods') and tectonic unroofing rates. Modelling results are consistent with a regional structural model that suggests west to east younging of specific Acadian deformational events, and therefore diachroneity of attainment of peak metamorphic conditions and subsequent 40Ar/39Ar closure during cooling. Modelling is consistent with the proposition that regional variations in timing and peak conditions of metamorphism are the result of the variable depths to which rocks were loaded by an eastward-thickening thrust-nappe pile rooted to the east (New Hampshire Sequence), as well as by diachronous structural processes within the lower plate rocks of the Vermont Sequence.

Journal of Metamorphic Geology↗
USGS2024

Structure and morphology of chars and activated carbons obtained from thermal treatment of coal and biomass origin materials, including their wastes: Results from the ICCP Microscopy of Carbon Materials Working Group

This paper describes the evaluation of petrographic textures in char and activated carbon derived from coal, coal by-products and biomass, formed during carbonization and activation processes. This work represents the results of interlaboratory exercises from 2016 to 2022 of the Microscopy of Carbon Materials Working Group in Commission III of the International Committee for Coal and Organic Petrology. The interlaboratory exercises were run on photomicrograph samples. For textural characterization of carbon materials, the existing American Society for Testing and Materials (ASTM) classification system for metallurgical coke was applied. Morphological differences were evaluated in 29 carbon material types, including 22 char samples, and 7 activated carbon (AC) samples obtained experimentally using conventional direct/indirect and microwave heating technologies. This approach gives an extended view on the identification of microporous carbons, and how a certain heat treatment develops a certain optical texture and structure in a raw material. The requested evaluation of carbon materials was related to their porosity, origin, extent, and characteristics, which are particular to each carbon material type. Because carbon matrices can form a wide range of optical textures during heat treatment it is important to demonstrate which carbon occurrences will have a crucial role in industrial applications dominated by adsorption phenomena. The interlaboratory exercises included 17 participants from 14 laboratories. Four sets of digital black and white and colour photomicrographs were distributed, which in total comprised 184 fields of different types of carbon material. The results were evaluated based on four levels: (i) optical texture (isotropic/anisotropic), (ii) optical type and size (punctiform, mosaic, fiber, ribbon, domain), iii) morphology (porous, non-porous/massive), and (iv) particle origin (precursor type). The statistical method applied to evaluate the results was based on “raw agreement indices”. Comparative analyses of the average values of the level of overall agreement showed homogeneity in the results, the mean value was 89%, with a minimum value of 87% and a maximum value of 91% for those who participated in at least three out of four exercises.

International Journal of Coal Geology↗
USGS2012

Petrology and hydrothermal mineralogy of US Geological Survey Newberry: 2. Drill core from Newberry Caldera, Oregon

U.S. Geological Survey Newberry 2 was drilled to a depth of 932 m within Newberry caldera. The bottom-hole temperature of 265°C is the highest reported temperature of any drill hole in the Cascades region of the United States. The upper part of the stratigraphic section penetrated by Newberry 2 consists of caldera fill below which are increasingly more mafic lavas ranging from rhyodacite at 501 m to basalt at 932 m. Measured temperatures shallower than 300 m are less than 35°C, and rock alteration consists of hydration of glass and local palagonitization of basaltic tuffs. Incipient zeolitization and partial smectite replacement of ash and pumice occurred throughout the pumiceous lithic tuffs from 300 to 500 m. Higher-temperature alteration of the tuffs to chlorite and mordenite occurs adjacent to a rhyodacite sill at 460–470 m; alteration minerals within the sill consist of pyrrhotite, pyrite, quartz, calcite, and siderite. Below 697 m the rocks are progressively more altered with depth mainly because of increased temperature along a conductive gradient from 100°C at 697 m to 265°C at 930 m. Fluid inclusions in quartz and calcite indicate that temperatures in the past have been higher than at present, most likely due to local confining pressures between impermeable lava flows. Flow breccias are more altered than the adjacent dense massive lava flows, regardless of composition, because of their much higher permeability. Hydrothermal minerals in this zone are mainly mixed-layer chlorite-smectite, quartz, calcite, and pyrite. Chlorite becomes more abundant than mixed-layer clays near the bottom of the hole. In the lowest two lava flows, epidote, anhydrite, and scarce hematite occur locally. Alteration and leaching in the basal 2 m are unique and have led to the postulation of a localized two-phase fluid zone consisting mainly of steam and CO 2 . The hydrothermal system of Newberry 2 is a simple evolving system associated with the evolution of Newberry Volcano. Only a few localized highly altered intervals where fracturing controlled fluid access occur in the core. There are no crosscutting fractures to indicate multiple hydrothermal systems. Chemical analyses of altered rocks and equivalent fresh rocks indicate that little chemical migration has taken place.

Journal of Geophysical Research Solid Earth↗
USGS2000

Metalliferous coals of the Westphalian A Joggins Formation, Cumberland basin, Nova Scotia, Canada: Petrology, geochemistry, and palynology

Five coals of Westphalian A (early Middle Pennsylvanian) age were sampled from the Joggins Formation section exposed along Chignecto Bay at Joggins, Nova Scotia. Coal beds along the bay were mined beginning in the early 17th century, yet there have been few detailed published investigation of the coal beds of this classic section. The lowermost coal, the Upper Coal 28 (Upper Fundy), is a high-vitrinite coal with a spore assemblage dominated by arboreous lycopsid spores with tree ferns subdominant. The upper portions of the coal bed have the highest ratio of well-preserved to poorly-preserved telinite of any of the coals investigated. Coal 19 ('clam coal') has 88% total vitrinite but, unlike the Fundy coal bed, the telinite has a poor preservation ratio and half the total vitrinite population comprises gelocollinite and vitrodetrinite. The latter coal bed is directly overlain by a basin-wide limestone bed. The Lower Kimberly coal shows good preservation of vitrinite with relatively abundant telinite among the total vitrinite. The Middle Kimberly coal, which underlies the tetrapod-bearing lycopsid trees found by Lyell and Dawson in 1852, exhibits an upward decrease in arboreous lycopod spores and an upward increase in the tree fern spore Punctatisporites minutus. Telinite preservation increases upwards in the Middle Kimberly but overall is well below the preservation ratio of the Upper Fundy coal bed. The coals all have high sulfur contents, yielding up to 13.7% total sulfur for the lower lithotype of the Upper Fundy coal bed. The Kimberly coals are not only high in total and pyritic sulfur, but also have high concentrations of chalcophile elements. Zinc, ranging up to 15,000 ppm (ash basis), is present as sphalerite in fusain lumens. Arsenic and lead each exceed 6000 ppm (ash basis) in separate lithotypes of the Kimberly coals. Together these data are consistent with elevated pH in planar mires. The source of the elemental enrichment in this presumed continental section is enigmatic. (C) 2000 Elsevier Science B.V. All rights reserved.Five coals of Westphalian A (early Middle Pennsylvanian) age were sampled from the Joggins Formation section exposed along Chigneto Bay at Joggins, Nova Scotia. All the coals were found to have high sulfur contents. Overall, the data obtained are consistent with elevated pH in planar mires.

International Journal of Coal Geology↗
USGS2022

Pore systems and organic petrology of cretaceous Mowry and Niobrara source-rock reservoirs, Powder River Basin, Wyoming, USA

The Powder River Basin (PRB) is a world-class oil province, in large part thanks to contributions from premier source rocks, Cretaceous Mowry and Niobrara shales. Both formations are also unconventional reservoirs. A critical aspect of evaluating production potential and finding sweet spots is the nature of the pore systems in these fine-grained source-rock reservoirs. Variation by stratigraphic interval is important for selecting optimum target zones for horizontal wells. Understanding variation in pore type, size, and connectivity and relationships with mineralogy and fabric help in determining prospectivity in different parts of the basin. Deciphering controls on pore-system development helps predict intervals and locations of optimum reservoir quality. Imaging of Niobrara and Mowry samples from a range of thermal maturities provided observations and data on pore systems, organic matter (OM) types and associations with mineralogy and fabric, wettability, and microporosity associated with both diagenetic and detrital clays. Imaging techniques included scanning electron microscopy, organic petrography and correlative scanning electron microscopy, and mapping of mineralogy through energy dispersive spectroscopy. Mean solid bitumen (BR o ) and vitrinite reflectance (VR o ) values indicate all samples are in the oil window with values ranging from 0.52 to 1.15%. Organic fluorescence is prominent in amorphous OM, solid bitumen and some vitrinite in the early oil window. The fluorescence is extinguished at higher thermal maturity. Carbonate pellets (in Niobrara) mainly contain migrated solid bitumen and residual live oil and little or no terrigenous OM (vitrinite and inertinite). However, terrigenous OM is common in siliceous/argillaceous laminae in both formations, where it occurs with amorphous OM, some of which has converted in situ to a solid bitumen petroleum residue. One key finding is the widespread presence of migrated OM at very early oil window maturity. Distribution of such OM and associated wettability alteration is fabric-controlled, at all levels of thermal maturity studied. Clay morphology and abundance and supporting rigid mineral grain framework strongly influence pore development, preservation, and connectivity in both formations. Carbonate content is a good proxy for reservoir quality in Niobrara intervals due to association of porous solid bitumen with calcareous fecal pellets. High recrystallized microquartz content is associated with the best reservoir intervals in the Mowry.

Wyoming↗
USGS2010

Organic petrology of subbituminous carbonaceous shale samples from Chalāw, Kabul Province, Afghanistan: Considerations for paleoenvironment and energy resource potential

Neogene (?) subbituminous carbonaceous shale deposits from Chalāw, Afghanistan, were investigated through organic petrology techniques and standard coal analyses to determine paleoenvironment and potential for resource utilization. The Chalāw deposit, approximately 30 km southeast of Kabul, currently is exploited for brick making and domestic heating and cooking. Three multiple-bench channel samples of the mined bed at Chalāw were collected and evaluated. The presence of significant huminite (ranging from 0.2 to 59.0 vol.%, mineral-inclusive basis) is suggestive of a terrestrial lignin-rich precursor plant material. Measured reflectance values of 0.38–0.55% indicate subbituminous rank. This rank suggests burial depths of approximately 1500 m and maximum temperatures of approximately 50 °C. Structured liptinite macerals generally are absent except for some fluorescing morphologies interpreted to be poorly-preserved root cork suberinite. Sponge spicule bioliths including gemmoscleres and megascleres are common. These petrographic observations, in addition to high mineral matter content (33 to > 95 vol.%), medium to high sulfur content (2.1–11.5 wt.%, dry basis; db), and the presence of common gastropod? shell fragments and an aragonite-needle chalk bed are consistent with, but not directly indicative of, a marginal marine or estuarine mangrove depositional environment. However, additional data are necessary to confirm this hypothesis and deposition in a freshwater environment cannot be ruled out at this time. Commercial-scale development and utilization of the Chalāw deposit as a thermal fuel resource may be possible using a fluidized bed combustion system which could accept the low-quality mine product currently produced. Samples examined herein contain high-ash yield (45–90 wt.%, db), high total moisture content (17–39 wt.%), low calorific value (980–6860 Btu/lb, m,mmf), and have poor agglomerating properties (FSI = 0), consistent with fuels utilized in fluidized bed combustors. However, delineation of the extent of the deposit through field investigation will be necessary to make a quantified resource estimate for mine planning.

Kabul Province↗
USGS2012

Anatomy of a metamorphic core complex: seismic refraction/wide-angle reflection profiling in southeastern California and western Arizona

The metamorphic core complex belt in southeastern California and western Arizona is a NW-SE trending zone of unusually large Tertiary extension and uplift. Midcrustal rocks exposed in this belt raise questions about the crustal thickness, crustal structure, and the tectonic evolution of the region. Three seismic refraction/wide-angle reflection profiles, acquired and analyzed as a part of the U.S. Geological Survey's Pacific to Arizona Crustal Experiment, were collected to address these issues. The results presented here, which focus on the Whipple and Buckskin-Rawhide mountains, yield a consistent three-dimensional image of this part of the metamorphic core complex belt. The seismic refraction/wide-angle reflection data are of excellent quality and are characterized by six principal phases that can be observed on all three profiles. These phases include refractions from the near-surface and crystalline basement, reflections from boundaries in the middle and lower crust, and reflections and refractions from the upper mantle. The final model consists of a thin veneer (<2 km) of upper plate and fractured lower plate rocks (1.5–5.5 km s−1 ) overlying a fairly homogeneous basement (∼6.0 km s −1 ) and a localized high-velocity (6.4 km s −1 ) body situated beneath the western Whipple Mountains. A prominent midcrustal reflection is identified beneath the Whipple and Buckskin-Rawhide mountains between 10 and 20 km depth. This reflector has an arch-like shape and is centered beneath, or just west of, the metamorphic core complex belt. This event is underlain by a weaker, approximately subhorizontal reflection at 24 km depth. Together, these two discontinuities define a lens-shaped midcrustal layer with a velocity of 6.35–6.5 km s −1 . The apex of this midcrustal layer corresponds roughly to a region of major tectonic denudation and uplift (∼10 km) defined by surface geologic mapping and petrologic barometry studies. The layer thins to the northeast and is absent in the Transition Zone. The 6.35–6.5 km s −1 velocities are compatible with a diorite composition or a mixture of mafic and silicic rocks. This midcrustal layer is underlain by a higher-velocity lower crustal layer that is modeled as only 3–6 km thick beneath the metamorphic core complex belt and regions to the southwest. To the northeast, however, this layer thickens to 8–10 km as the midcrustal layer pinches out above it. The velocity of the lower crust is constrained by traveltime modeling and is 6.6±0.15 kms −1 beneath the western Transition Zone and the metamorphic core complex belt; higher velocities may be present farther to the southwest where the layer is thin. The velocity of the lower crust is too low to accommodate significant amount of mafic underplating at the base of the crust. Instead, we interpret the velocities to indicate that the lower crust is passively thinned beneath these regions without significant addition of mafic mantle-derived intrusions. The crust-mantle boundary does not dome up beneath the core complexes but remains approximately subhorizontal at a depth of 26–28 km or, in the case of the Whipple Mountains, actually deepens; a 3-km crustal root is modeled. This lack of upward doming of the Moho, together with the vertical alignment of the metamorphic core complex belt over what are believed to be extension-related structures in the middle and lower crust, suggest that there is no lateral offset of upper crustal deformation from deeper zones of extension, as one would expect if extension occurred along crust-penetrating shear zones (Wernicke, 1981; Wernicke et al., 1985). Instead, domed and inflated middle crust and thinned lower crust directly underlie the region of greatest thinning of the upper crust.

Journal of Geophysical Research↗
USGS2004

Petrographic and geochemical contrasts and environmentally significant trace elements in marine-influenced coal seams, Yanzhou mining area, China

The Yanzhou mining area in west Shandong Province, China contains coals of Permian and Carboniferous age. The 31 and 32 seams of the Permian Shanxi Formation and seams 6, 15-17 of the Carboniferous Taiyuan Formation were analyzed for coal petrology, mineralogy and geochemical parameters. The parameters indicate that the coal is high volatile bituminous in rank. The coal is characterized by high vitrinite and low to medium inertinite and liptinite contents. These properties may be related to evolution of the coal forming environment from more reducing conditions in a marine influenced lower delta plain environment for the early Taiyuan coals to more oxidizing paleoenvironments in an upper delta plain for the upper Shanxi coal seams. The major mineral phases present in the coal are quartz, kaolinite, pyrite and calcite. Sulfur is one of the hazardous elements in coal. The major forms of sulfur in coal are pyritic, organic and sulfate sulfur. Pyritic and organic sulfur generally account for the bulk of the sulfur in coal. Elemental sulfur also occurs in coal, but only in trace to minor amounts. In this paper, the distribution and concentration of sulfur in the Yanzhou mining district are analyzed, and the forms of sulfur are studied. The sulfur content of the Taiyuan coal seams is considerably higher than that of the Shanxi coals. Organic sulfur content is positively correlated to total and pyritic sulfur. The vertical variation of Cu, Zn, Pb, As, Th, U and sulfur contents in coal seam 3 of the Shanxi Formation in the Xinglongzhuang mine show that all these trace elements, with the exception of Th, are enriched in the top and bottom plies of the seam, and that their concentrations are also relatively high in the dirt bands within the seam. The pyritic sulfur is positively correlated with total sulfur, and both are enriched in the top, bottom and parting plies of the seam. The concentrations of the trace elements are closely related to sulfur and ash contents. Most of the trace elements are correlated with the ash content, and may be associated with the mineral matter in the coal. ?? 2004 Elsevier Ltd. All rights reserved.

Journal of Asian Earth Sciences↗
USGS2004

Record of late Pleistocene glaciation and deglaciation in the southern Cascade Range. I. Petrological evidence from lacustrine sediment in Upper Klamath Lake, southern Oregon

Petrological and textural properties of lacustrine sediments from Upper Klamath Lake, Oregon, reflect changing input volumes of glacial flour and thus reveal a detailed glacial history for the southern Cascade Range between about 37 and 15 ka. Magnetic properties vary as a result of mixing different amounts of the highly magnetic, glacially generated detritus with less magnetic, more weathered detritus derived from unglaciated parts of the large catchment. Evidence that the magnetic properties record glacial flour input is based mainly on the strong correlation between bulk sediment particle size and parameters that measure the magnetite content and magnetic mineral freshness. High magnetization corresponds to relatively fine particle size and lower magnetization to coarser particle size. This relation is not found in the Buck Lake core in a nearby, unglaciated catchment. Angular silt-sized volcanic rock fragments containing unaltered magnetite dominate the magnetic fraction in the late Pleistocene sediments but are absent in younger, low magnetization sediments. The finer grained, highly magnetic sediments contain high proportions of planktic diatoms indicative of cold, oligotrophic limnic conditions. Sediment with lower magnetite content contains populations of diatoms indicative of warmer, eutrophic limnic conditions. During the latter part of oxygen isotope stage 3 (about 37-25 ka), the magnetic properties record millennial-scale variations in glacial-flour content. The input of glacial flour was uniformly high during the Last Glacial Maximum, between about 21 and 16 ka. At about 16 ka, magnetite input, both absolute and relative to hematite, decreased abruptly, reflecting a rapid decline in glacially derived detritus. The decrease in magnetite transport into the lake preceded declines in pollen from both grass and sagebrush. A more gradual decrease in heavy mineral content over this interval records sediment starvation with the growth of marshes at the margins of the lake and dilution of detrital material by biogenic silica and other organic matter.

Oregon↗
USGS1996

Thermal and mass implications of magmatic evolution in the Lassen volcanic region, California, and minimum constraints on basalt influx to the lower crust

We have analyzed the heat and mass demands of a petrologic model of basalt-driven magmatic evolution in which variously fractionated mafic magmas mix with silicic partial melts of the lower crust. We have formulated steady state heat budgets for two volcanically distinct areas in the Lassen region: the large, late Quaternary, intermediate to silicic Lassen volcanic center and the nearby, coeval, less evolved Caribou volcanic field. At Caribou volcanic field, heat provided by cooling and fractional crystallization of 52 km 3 of basalt is more than sufficient to produce 10 km of rhyolitic melt by partial melting of lower crust. Net heat added by basalt intrusion at Caribou volcanic field is equivalent to an increase in lower crustal heat flow of ∼7 mW m −2 , indicating that the field is not a major crustal thermal anomaly. Addition of cumulates from fractionation is offset by removal of erupted partial melts. A minimum basalt influx of 0.3 km 3 (km 2 Ma) −1 is needed to supply Caribou volcanic field. Our methodology does not fully account for an influx of basalt that remains in the crust as derivative intrusives. On the basis of comparison to deep heat flow, the input of basalt could be ∼3 to 7 times the amount we calculate. At Lassen volcanic center, at least 203 km 3 of mantle-derived basalt is needed to produce 141 km 3 of partial melt and drive the volcanic system. Partial melting mobilizes lower crustal material, augmenting the magmatic volume available for eruption at Lassen volcanic center; thus the erupted volume of 215 km 3 exceeds the calculated basalt input of 203 km 3 . The minimum basalt input of 1.6 km 3 (km 2 Ma) −1 is >5 times the minimum influx to the Caribou volcanic field. Basalt influx high enough to sustain considerable partial melting, coupled with locally high extension rate, is a crucial factor in development of Lassen volcanic center; in contrast, Caribou volcanic field has failed to develop into a large silicic center primarily because basalt supply there has been insufficient.

Journal of Geophysical Research B: Solid Earth↗
USGS1996

Petrology and U-PB geochronology of the Robertson River Igneous Suite, Blue Ridge province, Virginia - Evidence for multistage magmatism associated witn an early episode of Laurentian rifting

The Late Neoproterozoic (735-702 Ma) Robertson River Igneous Suite includes at least eight plutons ranging in composition from syenogranite to alkali feldspar granite to alkali feldspar syenite. These plutons intruded Mesoproterozoic (1.2-1.0 Ga) gneissic basement of the Blue Ridge anticlinorium in northern and central Virginia during an early episode of Laurentian rifting. Robertson River plutons range in composition from metaluminous to peralkaline and, relative to other granite types, exhibit compositional characteristics of A-type granitoids including (1) marked enrichment in Nb, Zr, Y, REE (except Eu), and Ga, (2) high Ga/Al and FeO (total) /MgO, and (3) depletion of Ba and Sr. High Ga/Al ratios are particularly diagnostic of the suite and serve as an effective discriminant between originally metaluminous and peralkaline bulk compositions, providing a useful proxy for widely used indicators based on major elements that are prone to remobilization. U-Pb isotopic analyses of zircons indicate that the suite was emplaced in two pulses, occurring at 735 to 722 and 706 to 702 Ma. Metaluminous magmas were emplaced during both pulses, formed most of the main batholith, and fractionated as independent, time-correlative groups. Peralkaline magmas were emplaced only during the final pulse, formed a volcanic center that erupted unknown quantities of rhyolite, and experienced a style of fractionation similar to the metaluminous types. Differences in Ce/Nb, Y/Nb, and Yb/Ta ratios suggest that the metaluminous and peralkaline magmas were derived from different sources. The Robertson River Igneous Suite is part of a regional group of Late Neoproterozoic (760-700 Ma) plutons including at least 20 other A-type granitoid bodies exposed throughout the Laurentian terrane of Virginia and northwestern North Carolina. Like the Robertson River, most of the other granitoids are metaluminous in composition, typically form multi-intrusive, elongate plutons, and are not geographically constrained to the vicinity of major Neoproterozoic volcanic centers. The Late Neoproterozoic plutons of the Laurentian Appalachians are similar in lithology, composition, and style of emplacement to Miocene granitoids that occur on the southern flanks of the present Red Sea rift and that are considered a younger analog of the Appalachian plutons. However, the Red Sea granitoids were emplaced within a few million years of the initial development of oceanic crust whereas the Appalachian plutons appear largely to have pre-dated development of the Iapetus Ocean by about 130 my.

Virginia↗
USGS2006

Analysis of gravity and topography in the GLIMPSE study region: Isostatic compensation and uplift of the Sojourn and Hotu Matua Ridge systems

The Gravity Lieations Intraplate Melting Petrologic and Seismic Expedition (GLIMPSE) Experiment investigated the formation of a series of non-hot spot, intraplate volcanic ridges in the South Pacific and their relationship to cross-grain gravity lineaments detected by satellite altimetry. Using shipboard gravity measurements and a simple model of surface loading of a thin elastic plate, we estimate effective elastic thicknesses ranging from ???2 km beneath the Sojourn Ridge to a maximum of 10 km beneath the Southern Cross Seamount. These elastic thicknesses are lower than predicted for the 3-9 Ma seafloor on which the volcanoes lie, perhaps due to reheating and thinning of the plate during emplacement. Anomalously low apparent densities estimated for the Matua and Southern Cross seamounts 2050 and 2250 kg m-3, respectively, probably are artifacts caused by the assumption of only surface loading, ignoring the presence of subsurface loading in the form of underplated crust and/or low-density mantle. Using satellite free-air gravity and shipboard bathymetry, we calculate the age-detrended, residual mantle Bouguer anomaly (rMBA). The rMBA corrects the free-air anomaly for the direct effects of topography, including the thickening of the crust beneath the seamounts and volcanic ridges due to surface loading of the volcanic edifices. There are broad, negative rMBA anomalies along the Sojourn and Brown ridges and the Hotu Matua seamount chain that extend nearly to the East Pacific Rise. These negative rMBA anomalies connect to negative free-air anomalies in the western part of the study area that have been recognized previously as the beginnings of the cross-grain gravity lineaments. Subtracting the topographic effects of surface loading by the ridges and seamounts from the observed topography reveals that the ridges are built on broad bands of anomalously elevated seafloor. This swell topography and the negative rMBA anomalies contradict the predictions of lithospheric cracking models for the origin of gravity lineaments and associated volcanic ridges, favoring models with a dynamic mantle component such as small-scale convection or channelized asthenospheric return flow. Copyright 2006 by the American Geophysical Union.

Journal of Geophysical Research B: Solid Earth↗
USGS1993

2.8-Ma ash-flow caldera at Chegem River in the northern Caucasus Mountains (Russia), contemporaneous granites, and associated ore deposits

Diverse latest Pliocene volcanic and plutonic rocks in the north-central Caucasus Mountains of southern Russia are newly interpreted as components of a large caldera system that erupted a compositionally zoned rhyolite-dacite ash-flow sheet at 2.83 ?? 0.02 Ma (sanidine and biotite 40Ar/39Ar). Despite its location within a cratonic collision zone, the Chegem system is structurally and petrologically similar to typical calderas of continental-margin volcanic arcs. Erosional remnants of the outflow Chegem Tuff sheet extend at least 50 km north from the source caldera in the upper Chegem River. These outflow remnants were previously interpreted by others as erupted from several local vents, but petrologic similarities indicate a common origin and correlation with thick intracaldera Chegem Tuff. The 11 ?? 15 km caldera and associated intrusions are superbly exposed over a vertical range of 2,300 m in deep canyons above treeline (elev. to 3,800 m). Densely welded intracaldera Chegem Tuff, previously described by others as a rhyolite lava plateau, forms a single cooling unit, is > 2 km thick, and contains large slide blocks from the caldera walls. Caldera subsidence was accommodated along several concentric ring fractures. No prevolcanic floor is exposed within the central core of the caldera. The caldera-filling tuff is overlain by andesitic lavas and cut by a 2.84 ?? 0.03-Ma porphyritic granodiorite intrusion that has a cooling age analytically indistinguishable from that of the tuffs. The Eldjurta Granite, a pluton exposed low in the next large canyon (Baksan River) 10 km to the northwest of the caldera, yields variable K-feldspar and biotite ages (2.8 to 1.0 Ma) through a 5-km vertical range in surface and drill-hole samples. These variable dates appear to record a prolonged complex cooling history within upper parts of another caldera-related pluton. Major W-Mo ore deposits at the Tirniauz mine are hosted in skarns and hornfels along the roof of the Eldjurta Granite, and associated aplitic phases have textural features of Climax-type molybdenite porphyries in the western USA. Similar 40Ar/39Ar ages, mineral chemistry, and bulk-rock compositions indicate that the Chegem Tuff, intracaldera intrusion, and Eldjurta Granite are all parts of a large magmatic system that broadly resembles the middle Tertiary Questa caldera system and associated Mo deposits in northern New Mexico, USA. Because of their young age and superb three-dimensional exposures, rocks of the Chegem-Tirniauz region offer exceptional opportunities for detailed study of caldera structures, compositional gradients in volcanic rocks relative to cogenetic granites, and the thermal and fluid-flow history of a large young upper-crustal magmatic system. ?? 1993.

Journal of Volcanology and Geothermal Research↗
USGS2026

Petrologic and geochemical characterization of the first year of the 2024–ongoing episodic Halemaumau eruption of Kilauea (Episodes 1–39)

Kīlauea has been erupting episodically since December 23, 2024 (and is ongoing at the time of this writing in 2026) with two consistently active vents in Halema‘uma‘u producing lava fountains ranging in height from 40 to 540 m. In the first year of the eruption (through December 24, 2025, episode 39), the U.S. Geological Survey's Hawaiian Volcano Observatory collected 178 samples for eruption monitoring purposes and used a subset of 80 for near-real-time geochemical analyses. Tephra, lava, and recycled lava lake ooze-out samples have been studied on inter-episode timescales using diverse microanalytical techniques, where research-scale investigations have proven to be advantageous pseudo-near-real-time techniques. Here we present a geochemical and petrologic overview of episodes 1–39 to better understand eruption dynamics and identify changes at Kīlauea following the 2018 summit caldera collapse. There are no significant intra-episode geochemical changes that might be related to variable fountain heights or episode durations, suggesting that eruption dynamics are instead primarily controlled by viscosity and conduit geometry changes throughout a single episode and between episodes. There is variable but clear influence of the still-molten lava lake interior on compositions of this eruption, including in tephra samples from lava fountains, indicating that the vent conduits are connected in some way at depth with the still molten passive lava lake core. Tephra glasses (7.0–7.8 wt.% MgO) show cyclic changes in MgO that were decoupled from lava fountain heights and behavior in episodes 1–28 but positively correlated after episode 29. Additionally, whole-rock and glass compositions are enriched in minor elements such as K 2 O and TiO 2 compared to 2008–2023 summit eruptions, tracking the arrival of a new magma composition that may be related to the prolonged episodic eruptive behavior. Olivine-hosted melt inclusions from five episodes have ~0.35–0.43 wt.% H2O, < 300 ppm CO 2 and < 1500 ppm S, with no significant variations between episodes. Melt and fluid inclusion barometry show that magmas driving these episodes are stored and sourced from the shallow 1–2 km Halemaʻumaʻu reservoir, as were olivine from the 2023 summit eruption. The ongoing episodic eruption also has higher bulk-rock MgO compared to the five previous summit eruptions (2020−2023) and the forsterite (Fo) content of olivine has varied systematically from 2015 to 2025 with the equilibrium olivine composition of the Halema‘uma‘u reservoir increasing from Fo 80.7 in 2015 to Fo 82.7 by 2025. We argue that the Halemaʻumaʻu reservoir is heating up because the rate of magma supply is outpacing effusion and cooling following caldera collapse in 2018.

Hawaii↗
USGS2005

Petrology, mineralogy and geochemistry of mined coals, western Venezuela

Upper Paleocene to middle Miocene coal samples collected from active mines in the western Venezuelan States of Táchira, Mérida and Zulia have been characterized through an integrated geochemical, mineralogical and petrographic investigation. Proximate, ultimate, calorific and forms of sulfur values, major and trace element, vitrinite reflectance, maceral concentrations and mineral matter content have been determined for 16 channel samples from 14 mines. Ash yield generally is low, ranging from < 1 to 17 wt.% (mean = 5 wt.%) on a dry basis (db). Total sulfur content is low to moderate, ranging from 1 to 6 wt.%, db (average = 1.7 wt.%). Calorific value ranges from 25.21 to 37.21 MJ/kg (10,840–16,000 Btu/lb) on a moist, mineral-matter-free basis (average = 33.25 MJ/kg, 14,300 Btu/lb), placing most of the coal samples in the apparent rank classification of high-volatile bituminous. Most of the coal samples exhibit favorable characteristics on the various indices developed to predict combustion and coking behavior and concentrations of possible environmentally sensitive elements (As, Be, Cd, Cr, Co, Hg, Mn, Ni, Pb, Sb, Se, Th and U) generally are similar to the concentrations of these elements in most coals of the world, with one or two exceptions. Concentrations of the liptinite maceral group range from < 1% to 70 vol.%. Five samples contain > 20 vol.% liptinite, dominated by the macerals bituminite and sporinite. Collotelinite dominates the vitrinite group; telinite was observed in quantities of ≤ 1 vol.% despite efforts to better quantify this maceral by etching the sample pellets in potassium permanganate and also by exposure in an oxygen plasma chamber. Inertinite group macerals typically represent < 10 vol.% of the coal samples and the highest concentrations of inertinite macerals are found in distantly spaced (> 400 km) upper Paleocene coal samples from opposite sides of Lago de Maracaibo, possibly indicating tectonic controls on subsidence related to construction of the Andean orogen. Values of maximum reflectance of vitrinite in oil ( R o max ) range between 0.42% and 0.85% and generally are consistent with the high-volatile bituminous rank classification obtained through ASTM methods. X-ray diffraction analyses of low-temperature ash residues indicate that kaolinite, quartz, illite and pyrite dominate the inorganic fraction of most samples; plagioclase, potassium feldspar, calcite, siderite, ankerite, marcasite, rutile, anatase and apatite are present in minor or trace concentrations. Semiquantitative values of volume percent pyrite content show a strong correlation with pyritic sulfur and some sulfide-hosted trace element concentrations (As and Hg). This work provides a modern quality dataset for the western Venezuela coal deposits currently being exploited and will serve as the foundation for an ongoing coal quality research program in Venezuela.

International Journal of Coal Geology↗
USGS2020

Sample mounting for organic petrology: No thermal effects from transient exposure to elevated temperatures

For sample mounting, organic petrology laboratories typically use cold-setting epoxy-resin (e.g., 40 °C, used by Oklahoma Geological Survey, OGS) or heat-setting thermoplastic (e.g., 180 °C, used by U.S. Geological Survey, USGS). Previous workers have suggested a systematic huminite/vitrinite reflectance (VR o ) increase was associated with the thermoplastic preparation process, relative to epoxy mounting, which was possibly attributed to moisture loss from organic matter due to the transient high temperatures of plastic mounting. In this study, we evaluated thermal effects to low thermal maturity organic matter from transient exposure to elevated temperatures. A subbituminous coal sample was subjected to long-term (4 to 38 weeks) exposure to temperatures of 85 to 120 °C and afterward evaluated by multiple approaches to test thermal advance [elemental analyses, Rock-Eval pyrolysis, Fourier transform infrared spectroscopy (FTIR), nuclear magnetic resonance (NMR), pyrolysis gas chromatography, and petrographic analyses, including huminite/vitrinite reflectance and spectral fluorescence], all of which showed no detectable systematic (statistically insignificant) changes between the original sample and its heat-treated products. We also compared huminite/vitrinite reflectance of six low thermal maturity samples (those most likely to react to transient heating) mounted via both cold-setting epoxy-resin and heat-setting thermoplastic. Results indicate measured VR o of a sample prepared by one mounting process was within the standard deviation of reflectance for the same sample prepared via the other process. Moreover, VR o results were not systematically higher in thermoplastic mounts. Contrary to previous work, these results suggest thermoplastic mounting or other transient exposure to elevated temperatures does not impact thermal maturity estimates from reflectance measurement for low thermal maturity organic samples. Furthermore, the average interlaboratory difference in measured VR o (between OGS and USGS) for the same sample prepared by either epoxy-resin or thermoplastic mounting was 0.038%, about double the average difference between VR o for the same sample prepared via epoxy-resin versus thermoplastic in a single laboratory (0.024%). This result indicates interlaboratory variability impacts VR o measurement reproducibility to the extent that systematic differences could not be observed between thermoplastic and cold-setting sample preparation approaches, even if such differences were present.

International Journal of Coal Geology↗
USGS2000

Sedimentary petrology of a declining reef ecosystem, Florida reef tract (U.S.A.)

Petrologic evaluation of biogenic sediments collected shelf-wide along the Florida reef tract in 1989 revealed three principal components: coral, the calcareous green alga Halimeda, and mollusc. The dominant grain was dependent in part upon local morphology that controlled composition and vitality of the biota. Either Halimeda or mollusc grains prevailed in sands off the upper Keys. In the middle and lower Keys, Halimeda grains prevailed nearshore and coral grains offshore. Comparison with similar analyses of samples collected in 1952 and 1963 indicates that, over 37 years, the relative abundance of molluscan grains more than doubled in the upper Keys and that of particulate coral tripled in the middle Keys. These changes can be interpreted in the context of physical and biological events that affected Florida Keys reefs over that period of time. In the 1970s, outbreaks of extremely cold water killed even representatives of the hardiest coral species. In the 1980s, black-band and white-band diseases decimated the major reef-building acroporid corals, and the pivotal herbivore, Diadema antillarum, disappeared. Although Diadema is a major coral bioeroder, the sea urchin is also essential to healthy reef growth. The increase in coral debris in the middle Keys may be related to Hurricane Donna in 1960, but it is also consistent with the prediction of accelerated bioerosion by boring organisms in response to increased plankton productivity. Plankton productivity is stimulated by nutrients from Florida Bay and by well-documented eutrophication of nearshore environments. In the upper Keys, where reefs are somewhat removed from bay and nearshore influence, a relative decrease in coral debris over the 37 years may reflect proliferation of algae and algae-grazing molluscs as well as suppressed rates of bioerosion in the absence of Diadema. Human activities have substantially increased the natural flux of fixed nitrogen to coastal systems worldwide. Waters in the Florida Keys are no exception. Spatial and temporal trends in sediment constituents are compared to a previously published model that predicts the response of benthic biota to changes in nutrient supply. As adapted to interpret changes observed in reef-tract sediments, the model provides insights into the natural nutrient gradient along the Florida reef tract.

Journal of Coastal Research↗
USGS2019

Reflectance increase from broad beam ion milling of coals and organic-rich shales due to increased surface flatness

Broad ion beam (BIB) milling is useful in organic petrology because it can yield flat sample surfaces and avert the ‘smearing’ of organic matter (OM) that results from traditional mechanical polishing. This potentially makes BIB especially useful in the study of nano-porosity, where even minor mechanical disruption of the sample surface distorts the sample characteristic of interest—the pore structure. However, several studies have observed an OM reflectance increase after BIB milling, concluding that ion milling may cause thermal alteration to OM surfaces. To better understand ion milling effects on organic matter, coal (subbituminous, high volatile bituminous, medium volatile bituminous, anthracite) and shale [Bakken Formation, Ohio Shale-Huron Member (5), Kimmeridge Clay Formation, Alum Shale, New Albany Shale] samples were prepared using traditional mechanical polishing methods. Reflectance measurements (% Ro) were gathered on all maceral types present before BIB milling, followed by re-measurement of OM reflectance at the same locations after milling. Most OM increased in reflectance after BIB milling, with some exceptions in high maturity samples. Liptinite macerals in both coal and shale samples showed the greatest percent reflectance increase on average (+133%; n=338), followed by solid bitumen (+49%; n=313), vitrinite (+26%; n=413), and inertinite (+9%; n=220). Despite the increases to OM reflectance caused by BIB milling, no evidence was found for kerogen conversion (e.g., change in maceral abundances), or for migration of newly generated petroleum (e.g., pseudomorphic replacement of kerogen by solid bitumen). Such changes occur when samples are thermally altered from immature conditions into the oil window (e.g., by hydrous pyrolysis), and, if the increases in OM reflectance were thermally driven (by BIB milling), they should have been observed in the above experiments. Herein, we also used atomic force microscopy to document a decrease in surface roughness of correlative locations of OM on pre- and post-ion milled samples. This improved surface polish caused by BIB milling appears to be the root cause of increased OM reflectance, as no other supporting evidence of thermal alteration could be found. That is, the fraction of light formerly lost to oblique scatter in diffuse reflectance from a mechanically polished surface is converted to specular reflectance after BIB ion milling. Thus the light leaves the surface at a near normal angle and returns to the detector, resulting in increased OM reflectance.

International Journal of Coal Geology↗