SEARCH · USGS Science

Results for “IEEE Transactions on Geoscience and Remote Sensing”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

1,665 records · Page 17Linked to original sources

USGS2026

From collision to subduction: Thermal-kinematic inversions constrain plate boundary structure and dip-slip activity in southwestern New Zealand

Constraints on three-dimensional fault system geometry and kinematics are required to understand both long-term tectonics and contemporary seismic hazard. In many cases, these parameters must be inferred from a combination of different data or analyses. Here, we invert low-temperature thermochronological data to quantitatively parameterize both the crustal-scale geometry and late Cenozoic dip-slip activity of the plate boundary system in southwest New Zealand. We find that the modern transpressive plate boundary system has accommodated the bulk of Australian-Pacific Plate convergence since establishment in the middle Miocene-early Pliocene. Shortening has occurred via (a) dextral-reverse slip on the moderate angle, listric central Alpine Fault décollement, and (b) reverse-slip on either the sharply curved, anti-listric northern Puysegur subduction interface or low-angle offshore thrust fault system that splays from the high-angle southern Alpine Fault at depth. We resolve late Cenozoic shortening rates on these structures that are indistinguishable, and interpret these to reflect the transfer of convergent deformation outboard of the predominantly strike-slip southern Alpine Fault. Our work helps elucidate the transition from strain localized oblique continental collision to strain partitioned subduction. We also provide an estimate of the across-strike width of the central-southern Alpine Fault section boundary at seismogenic depths. This is the first quantitative constraint on the geometry of a structural feature inferred to have arrested several major prehistoric earthquakes. This study furthers understanding of fault structure and dip-slip kinematics along the greatest sources of seismic hazard in and offshore of southwest New Zealand.

South Island↗

USGS2025

Status of water-level altitudes and long-term and short-term water-level changes in the Chicot and Evangeline (undifferentiated) and Jasper aquifers, greater Houston area, Texas, 2024

Since the early 1900s, groundwater withdrawn from the primary aquifers that compose the Gulf Coast aquifer system—the Chicot, Evangeline, and Jasper aquifers—has been an important source of water in the greater Houston area, Texas. This report, prepared by the U.S. Geological Survey in cooperation with the Harris-Galveston Subsidence District, City of Houston, Fort Bend Subsidence District, Lone Star Groundwater Conservation District, and Brazoria County Groundwater Conservation District, is one in an annual series of reports depicting the status of water-level altitudes and water-level changes in these aquifers in the greater Houston area. In this report, the Chicot and Evangeline aquifers are treated as a single aquifer for the purposes of providing annual assessments of regional-scale water-level altitudes and water-level changes over time. In 2024, shaded depictions of estimated water-level altitudes for the Chicot and Evangeline aquifers (undifferentiated) ranged from about 301 feet (ft) below the North American Vertical Datum of 1988 (NAVD 88) to about 184 ft above NAVD 88. The largest decline in water-level altitudes depicted by the 1977–2024 long-term water-level-change map was in south-central Montgomery County. In comparison, the 1990–2024 long-term water-level-change map depicts the largest declines in water-level altitudes in an area northwest of The Woodlands and in an area of northern Waller County. The largest rise in water-level altitudes for 1977–2024 is depicted in an area of east-central Harris County, whereas the largest rise in water-level altitudes for 1990–2024 is depicted in an area of central Harris County. The 5-year short-term water-level-change map depicts the largest declines in several parts of the study area, but these declines are concentrated primarily in northern Fort Bend County, southwestern Harris County, and south-central Montgomery County. The largest rise for 2019–24 is depicted at a well in northern Fort Bend County. The 1-year short-term water-level-change map depicts the largest declines at a well in northern Fort Bend County and a well in west-central Harris County. The largest rise for 2023–24 is depicted at a well in east-central Fort Bend County. In 2024, shaded depictions of estimated water-level altitudes for the Jasper aquifer ranged from about 255 ft below NAVD 88 to about 321 ft above NAVD 88. The 2000–24 long-term water-level-change map depicts the largest water-level decline in an area of central San Jacinto County; the largest rise is depicted in an area of central Grimes County. The 5-year short-term water-level-change map depicts the largest declines across parts of central and southern Montgomery County and at one well in north-central Harris County. The largest rise for 2019–24 is depicted at a well centered on the Montgomery-Grimes County line. The 1-year short-term water-level-change map depicts the largest declines at two wells in south-central Montgomery County and one well in northwestern Montgomery County on the west side of Lake Conroe. The largest rises during 2023–24 are depicted at one well in northwestern Montgomery County and one well in south-central Montgomery County.

Texas↗

USGS2026

Velocity-independent dry friction on mica: A realization of ideal Amontons-Coulomb friction

The Amontons-Coulomb friction law assumes that the frictional force between materials is independent of sliding velocity. However, as Coulomb noted, this is a rough approximation, and a second-order dependence of friction on the logarithm of sliding velocity is incorporated in a commonly used ‘rate- and state-dependent’ friction representation. Here we conduct shear experiments on mica, a layer-structured mineral, at temperatures ranging from 25 to 200ºC and under normal stress of 100 MPa. The friction coefficient clearly depends on the logarithmic sliding velocity at 25ºC, but rate sensitivity decreases with increasing temperature until at 200ºC, the friction coefficient is independent of sliding velocity. Our findings could initiate the development of velocity-independent frictional materials, realizing the ideal Amontons-Coulomb friction.

Physical Review Letters↗

USGS2026

A diatom-based quantitative sea-ice proxy for the Bering and Chukchi seas

Sea ice affects Earth's climate system on both regional and global scales. Its incorporation into climate can be used to achieve more accurate predictions of future climate. However, instrumental records of sea-ice concentration do not extend earlier than 1978. In an effort to extend this record, we constructed a proxy using the generalized additive model based on relative abundances of five easy-to-identify diatom species found in sediment samples across the Bering and Chukchi seas. Here we present the first quantitative diatom-based sea-ice proxy developed for Beringia. The developed proxy has been applied to two sediment cores in the Bering Sea ranging from 0 to 25.7 ka (HLY0204 51JPC) and 369 to 430 ka (IODP Exp 323 Site U1345) and one in the Chukchi Sea ranging from 2.7 to 10 ka (HLY0204 24JPC). The obtained reconstructions of sea-ice concentrations are similar, but not identical to previously published qualitative and nearby records based on other proxies. Because our results are quantitative, they can be incorporated into regional climate models. The proxy is publicly available as an R Shiny application (app) and can be applied to any diatom count from marine sediments in the region.

Bering Sea, Chukchi Sea↗

USGS2026

Coastal barrier resilience and resistance: Analysis and metrics for characterizing coastal state

Barrier islands are shaped by a variety of short- and long-term environmental processes such as storms and relative sea-level rise. These islands, found along the estuarine-marine interface, provide ecosystem services including storm surge and wave attenuation, erosion protection to inland marshes, habitat for fish and wildlife, and recreation. Natural resource managers require actionable information on how barrier island resilience and resistance changes over time to understand how an island’s current state relates to past conditions and to inform restoration prioritization and implementation. The U.S. Geological Survey and The Water Institute collaborated on a study to develop indicators of resilience and resistance for barrier islands in Louisiana. Here, resilience captures island persistence on yearly to decadal time scales, and resistance captures persistence on event time scales of days to weeks. The indicators fall in two categories: Tier 1 Screening Metrics, that can be readily calculated from available data, are easily interpretable as an evaluation of barrier condition, and provide a high-level snapshot of overall barrier resilience and resistance; and Tier 2 Analysis Metrics, which are detailed metrics that required specialized analysis and interpretation and are more applicable to answering specific questions managers may have about barrier state. The research team derived Tier 1 resilience indicators from subaerial land and vegetation cover calculated from publicly available maps and products based on satellite imagery. By benchmarking the total land and vegetation extent against their respective historical maxima, this metric provides a snapshot of an island’s current state in the context of its long-term trajectory. The research team developed Tier 1 resistance indicators based on subaerial island configuration and water level recurrence as a proxy for evaluating island resistance to storms, which are the primary driver of short-term change. These Tier 1 metrics can be analyzed over time to provide a high-level assessment of how an island’s resistance decreases because of elevation loss or sea-level rise or increases due to restoration or natural recovery. The research team developed Tier 2 resilience and resistance indicators and associated analyses to provide detailed information for specific time periods or applications (e.g., wildlife management). These metrics include habitat coverage from high-resolution maps, which show composition changes over time to capture the evolving resilience of specific habitat types; high tide flooding analysis, which evaluate island area relative to specified flooding thresholds to characterize resistance in the short-term or, if analyzed over time, indicate changes in resilience; and hypsometric curve analysis, which allows managers to evaluate island area changes above their own elevation benchmarks of interest and similarly characterize resistance in the short-term or indicate changes in resilience if assessed over time. The research team calculated Tier 1 metrics of the barrier islands and headlands along the coast of Louisiana for the period of 1984 through 2021 and Tier 2 metrics for select times during that period depending on data available and quality. The results were captured in a report card for each barrier, which also includes an overview of the metrics and their interpretation; a restoration and storm history; and Tier 1 and Tier 2 metric analysis, including benchmarking against coastwide and regional values as well as to an island’s pre-restoration trajectory. These report cards provide a readily digestible synthesis of barrier condition and trajectory that coastal managers can use to support restoration prioritization and other decisions.

Louisiana↗

USGS2024

The geometry of fault reactivation and uplift along the central part of the Maacama fault zone, northern California Coast Ranges (USA)

Fault reactivation of bedrock structures in active fault zones influences stress state and earthquake rupture phenomena through the introduction of weak slip surfaces that impact fault zone geometry and width. Yet, geometric relationships between modern faults and older reactivated faults are difficult to quantify in rocks that have experienced multiple deformation episodes. We used new geologic mapping, geomorphic tools, and structural modeling to quantify rock uplift and subsurface fault geometry of the central part of the Maacama Fault Zone near Ukiah, California, USA, and the surrounding area. Results suggest that the northern Mayacamas Mountains are in a tectonically driven disequilibrium, with differential rock uplift focused on the western side of the range. Steeply east-dipping fault surfaces and splays characterize the geometry of the Maacama Fault Zone. We mapped two newly identified faults to the east of the main Maacama Fault, the Cow Mountain–Mill Creek Fault, and Willow Creek Fault, which align with a moderately east-dipping cluster of microseismicity between 4–10 km depth beneath the Mayacamas Mountains. Static stress modeling on the Maacama Fault Zone and newly identified faults to the east quantify slip tendency values of 0.5–0.4, which suggests that the faults are moderately to poorly suited for slip in the modern stress field and may be weak. We infer that modern uplift is driven by oblique reverse, up-to-the-east, dip-slip motion on the reactivated Cenozoic Cow Mountain–Mill Creek and Willow Creek Faults as material is advected through a restraining bend on the Maacama Fault. This study shows that reactivated bedrock faults increase the fault zone width and introduce fault surfaces that contribute a component of vertical deformation and uplift in major strike-slip fault zones. Deformation is accommodated on an interconnected network of new and reactivated faults that delineate a complex seismic hazard.

California↗

USGS2025

Modeling byproduct and coproduct mine production and mineral substitution using multidimensional supply curves: Application to the Cu-Co-Ni system and beyond

Rapid demand growth is expected for many metals used in the energy transition. Many of these metals are byproducts of other commodities. Byproduct production’s price response is tied to host mineral economics, complicating its supply dynamics. Moreover, many of these metals are used in applications where the material properties desired are difficult to substitute; effectively, limiting how quickly demand can adapt to changes in commodity price. Previous work has demonstrated the interconnectivity of jointly produced mineral commodities from the supply side, where the copper–cobalt–nickel system was used and demand was assumed independent across commodities. Studies to understand byproduct-coproduct market interconnectivity on the demand side are limited, while studies on the interconnectivity of supply and demand simultaneously are even more so. We propose a modification to the multicommodity supply curve method to enable inter-commodity effects on demand simultaneous with supply. In batteries, high cobaltprices may push consumers to transition to high-nickel chemistries, causing the nickel demand surface to decrease with nickel price but increase with cobaltprice, creating a two-dimensional demand surface. Below cross-price elasticities of 0.05, inter-commodity effects were found to be negligible, potentially permitting exclusion of these effects for many commodities. This additional demand curve complexity introduces potential computation challenges alongside the capacity to model many interrelated commodity systems such as rare earth elements, ferroalloys, country-oriented subsidies or restrictions, and bifurcated sustainable metals markets. By presenting the work done on multicommodity supply surfaces to date and potential new directions, this work aims to catalyze the next round of innovative approaches to modeling jointly produced commodities.

Conference Paper↗

USGS2026

Assessment of groundwater quantity and quality contributions to Lake Huron

Lake Huron, one of the five Great Lakes, borders the United States and Canada, with Michigan as the only U.S. State on its shoreline. Like other freshwater lakes, it faces water-quality challenges from nutrients and chemicals applied across its drainage basin. Although past studies focused on surface-water sources, groundwater contributions remain less understood. To address this gap, the U.S. Geological Survey, as part of the Cooperative Science and Monitoring Initiative, classified drainage basins to Lake Huron into eight hydrogeologic zones based on bedrock rock type and glacial sediment transmissivity. Utilizing existing data and empirical field data, we quantified groundwater discharge and identified areas of concern for loading of chloride and nitrate to Lake Huron. Groundwater contributions, including indirect and shoreline discharge, ranged from 5.8 to 11.5 inches annually, totaling 1.9 cubic miles and 0.09 cubic mile, respectively. Hydrogeologic zones with higher glacial sediment transmissivity yielded greater indirect groundwater discharge. Chloride levels above the U.S. Environmental Protection Agency’s 250-mg/L recommendation were mainly in the Saginaw lowlands, whereas nitrate above the 10-mg/L standard was rare—found in only 11 wells. Together, the analysis of where groundwater discharge is occurring in the Lake Huron Basin and the identification of areas with potential groundwater-quality concerns can help prioritize areas that are critical to protecting the long-term health of Lake Huron.

Michigan↗

USGS2025

Hydrogeology, water budget, and simulated groundwater availability in the Salt Fork Arkansas River and Chikaskia River alluvial aquifers, northern Oklahoma, 1980–2020

The 1973 Oklahoma Groundwater Law (Oklahoma Statute §82–1020.5) requires that the Oklahoma Water Resources Board conduct hydrologic investigations of the State’s aquifers to determine the maximum annual yield for each groundwater basin. The U.S. Geological Survey, in cooperation with the Oklahoma Water Resources Board, conducted an updated hydrologic investigation of the Salt Fork Arkansas River and Chikaskia River alluvial aquifers in northern Oklahoma for the study period spanning 1980–2020 and evaluated the simulated effects of potential groundwater withdrawals on groundwater flow and availability in the Salt Fork Arkansas River alluvial aquifer. A hydrogeologic framework and conceptual model were developed to guide the development of a numerical model. Three groundwater-availability scenarios were evaluated by using the calibrated numerical model, which was focused on the Salt Fork Arkansas River alluvial aquifer. These scenarios were used to (1) estimate equal-proportionate-share groundwater withdrawal rates, (2) quantify the potential effects of projected well withdrawals on groundwater storage over a 50-year period, and (3) simulate the potential effects of a hypothetical 10-year drought. The 20-, 40-, and 50-year equal-proportionate-share groundwater withdrawal rates for the Salt Fork Arkansas River alluvial aquifer under normal recharge conditions were about 0.63, 0.58, and 0.57 acre-foot per acre per year, respectively. Projected 50-year groundwater withdrawal scenarios were used to simulate the effects of modified well withdrawal rates. Because well withdrawals were less than 2 percent of the calibrated numerical-model water budget, changes to the well groundwater withdrawal rates had little effect on simulated Salt Fork Arkansas River base flows and groundwater storage in the Salt Fork Arkansas River alluvial aquifer. A hypothetical 10-year drought scenario was used to simulate the potential effects of a prolonged period of reduced recharge on groundwater storage. Groundwater storage at the end of the hypothetical drought period was 14.5 percent less than the groundwater storage of the calibrated numerical model without the simulated drought.

Oklahoma↗

USGS2024

Simulated mean monthly groundwater-transported nitrogen loads in watersheds on the north shore of Long Island Sound, 1993–2022

Elevated nitrogen loads are pervasive in the Long Island Sound, an estuary that receives freshwater and nutrients from both surface-water and groundwater discharge. Surface-water nitrogen loads to the Long Island Sound are relatively well characterized, but less is known about groundwater-transported nitrogen loads. Prior work on the northern shore of Long Island Sound (Connecticut and areas of New York and Rhode Island) suggested that groundwater travel times are relatively short (median less than 2 years) and that decade-long nutrient legacies are not widespread. Because the travel times are short, groundwater flow and nutrient loads likely vary substantially between months. In the current study, the U.S. Geological Survey, in cooperation with the U.S. Environmental Protection Agency’s Long Island Sound Study and the Connecticut Department of Energy and Environmental Protection, developed a set of models to better characterize spatial and temporal patterns of groundwater-transported nitrogen loading from atmospheric deposition, septic systems, and fertilizers within the study area. The models provide an estimate, with uncertainty, of groundwater-transported nitrogen loads in the study area, filling a key gap in the nitrogen budget for Long Island Sound. The models also highlight the spatial and temporal variation in nitrogen loading throughout the study area. The modeling workflow involved four models. (1) A soil-water-balance model was developed by using the Soil-Water-Balance software to simulate groundwater recharge across the study area for water years 2005 through 2022. The simulated mean monthly recharge from the soil-water-balance model was used as input into a groundwater-flow model. (2) The groundwater-flow model was developed by using the MODFLOW 6 software and data for water years 1993 through 2022 and simulates average monthly hydrologic conditions. The groundwater-flow model was calibrated by using the Iterative Ensemble Smoother method within the PEST++ software. The Iterative Ensemble Smoother method generates an ensemble of sets of parameter values, with each set producing reasonable simulated hydrologic parameter values. (3) An ensemble of MODPATH particle-tracking simulations were run to generate particle flow paths and travel times, with each simulation using a different set of the flow model parameters. (4) A nitrogen load model uses the MODPATH simulation outputs to track nitrogen from the land surface through multiple attenuation zones until it discharges into fresh or saline surface water. As with the groundwater-flow model, the nitrogen model simulated average monthly groundwater-transported nitrogen loads for water years 1993 through 2022. One novel aspect of the nitrogen load model is that the nitrogen attenuation parameters were calibrated to observed nitrogen loads. Across the ensemble of simulated nitrogen loads, the median study-area-wide monthly simulated nitrogen loads from the aquifer to Long Island Sound throughout the year ranged from 900 to 18,600 kilograms of nitrogen per day, with a median load of 5,100 kilograms of nitrogen per day. The simulated loads were based on average monthly conditions for water years 1993 through 2022. Loads were highest during the winter and early spring and lowest during the late summer. However, simulated travel times for groundwater and nitrogen loads discharged to Long Island Sound during summer were longer than travel times for groundwater and loads discharged during the winter, indicating that, on average, groundwater discharged during summer traveled along different, and longer, flow paths, than groundwater discharged during winter. This indicates that summer loads would respond more slowly to changes in nitrogen inputs at the water table than winter loads. Over the entire study area, approximately 15 percent of the simulated load is from atmospheric deposition sources, 30 to 40 percent is from fertilizer, and 50 to 60 percent is from septic systems. The final analysis of the study involved simulating the change in groundwater-transported nitrogen load in response to upgrading septic systems or reducing fertilizing inputs to areas of turf grass. Both management interventions reduced the groundwater-transported nitrogen load, and reductions were greater in areas with greater loads from septic systems or turf-grass fertilizers. The delay between management actions and substantial reductions in groundwater-transported nitrogen loads varied seasonally; loads during the late summer months remained elevated longer than the winter loads.

Connecticut, Rhode Island↗

USGS2025

Ordovician stratigraphy, structure, and karst of the Falling Spring Valley, Alleghany County, Virginia, USA

This one-day trip highlights new findings on a preliminary bedrock geologic map that shows results from ongoing geologic mapping in the Falling Spring Valley of Alleghany County, Virginia, USA, which is the southern end of the larger Warm Springs Valley, an elongated anticlinal valley rimmed by Ordovician and Silurian siliciclastic rocks, and which is famous for its thermal springs. This mapping includes stratigraphic, structural, and karst field and lab research focused on the Ordovician strata exposed in the area, the oldest of which is the dolomitic upper part of the Beekmantown Formation (Lower Ordovician, Darriwilian), and the youngest of which is the Juniata Formation (Upper Ordovician, Katian), a sequence of siliciclastic redbeds. Warm Springs Valley is the location of the only known caves in the eastern United States—three at present—with thermal waters flowing in some of their passages. Stops on the trip will highlight key details from mapping efforts, primarily within the structurally deformed Ordovician carbonate sequence that is exposed in the core and limbs of the anticline, as well as the associated karst features that are developed in those carbonate rocks, including results of recent dye traces and water temperature monitoring that have improved our understanding of the karst hydrogeologic systems developed in these strata.

Virginia↗

USGS1999

Reconfigured-Channel Monitoring and Assessment Program

A U.S. Geological Survey program to monitor and assess channel reconfiguration activity is described. A data base available on the world wide web will enable land-management agencies and other interested parties to evaluate the long-term success of various channel reconfiguration projects. A demonstration project on the Lake Fork of the Gunnison River, Colorado, illustrates the program objectives and approach.

Colorado↗

USGS2025

A spatiotemporal deep learning approach for predicting daily air-water temperature signal coupling and identification of key watershed physical parameters in a montane watershed

Seasonal shifts from runoff to groundwater dominance influence daily headwater stream temperatures, especially where local groundwater input is strong. This input buffers temperature during hot periods, supporting cold-water habitats. Recent studies use air–water temperature signal metrics to identify zones of strong stream–groundwater connectivity. While Previous studies used air–water signal ratios as proxies for groundwater influence but were limited to specific sites and periods, without dynamic forecasting. This study is the first to forecast daily A r as a spatiotemporal signal using a Graph Convolutional Network–Long Short-Term Memory (GCN-LSTM) model. The model was trained using hydroclimate data (air temperature, precipitation, shortwave radiation, streamflow) and watershed physical features (e.g., sand content, slope). Results showed high predictive skill, achieving R 2 (NSE, RMSE) of 0.86 (0.73, 0.0004) for one-day-ahead to 0.52 (0.50, 0.0009) for seven-days ahead forecasts. Prior studies often have not explicitly incorporated spatial hydrogeologic drivers, but this model explicitly incorporates them to assess their impact on A r forecasting and stream-groundwater connectivity. Feature analysis identified mean sand, elevation, slope, clay, and TWI as key predictors of A r . Stronger groundwater signals appeared in hillslopes, elevations, and tributaries, highlighting watershed influence on streamflow. However, limitations include reliance on historical air–water temperature patterns for training and limited representation of extreme climate conditions. Despite these limitations, unlike previous studies relying on measured in-situ stream and air temperature, this study forecasts A r directly from climate and physiographic features after training, avoiding in-situ data requirements. Findings aiding predictions of stream ecosystem resilience.

New York↗

USGS2023

Stream sediment geochemistry in mineral exploration: A review of fine-fraction, clay-fraction, bulk leach gold, heavy mineral concentrate and indicator mineral chemistry

Stream sediment surveys support early-stage reconnaissance mineral exploration and regional assessment programmes, enhanced by recent improvements in analytical method detection limits, continuously improving mineral chemistry, and new approaches to the interpretation of geochemical data. Sediment surveys may be used to predict catchment basin lithology, mineralization type based on pathfinder geochemistry, and geological features based on indicator mineral chemistry. Sediment surveys that target a finer-fraction sediment sample led to the discovery of the La Colosa gold deposit, Colombia. The Batu Hijau porphyry Cu–Au deposit in Indonesia was discovered based on an anomalous clay-sized fraction sample 12 km downstream. In an arid region with poorly developed drainages and minor topographic relief, the Ag-base-metal Navidad District in Argentina was discovered with clay-fraction sediment geochemistry. Heavy mineral concentrate (HMC) sediment surveys that include mineral chemistry determinations have led to global diamond discoveries. HMC surveys contributed to discovery of the Ring of Fire Ni–Cu–PGE and chromite district, Ontario, Canada. Discoveries and geochemical mapping can assist advancement of the application of stream sediment geochemistry in those global areas for which lithologies and deposits are exposed. Stream sediment surveys continue to be one of the most cost-effective geochemical methods for covering large areas for mineral exploration.

Geochemistry: Exploration, Environment, Analysis↗

USGS2025

Controls on water quality below a reclaimed surface coal mine, southeastern Montana

Coal mining and reclamation can have a profound influence on hydrogeologic systems, with clear consequences for groundwater quality, yet their long-term influence on downgradient water quality over time following reclamation is less well documented. Geochemical trends were evaluated in water quality downgradient of a fully reclaimed landscape at the former Big Sky Mine in the Rosebud Creek watershed (southeastern Montana, USA), over a 3-year period (2020–2022), including bond release in 2022. Within 6 km downgradient from the reclaimed area, sulfate concentrations decreased from approximately 3500 to 1800 mg l −1 within the Miller Coulee alluvial aquifer. Major ions, δ 34 S SO4 values, and residence time tracers suggest that the observed decreases in sulfate concentration result from a combination of dilution by mixed-age inflows and incomplete transit of the high salinity plume from the mine boundary. Both bedrock and alluvial aquifers of the Rosebud Creek corridor contained contributions of millennia-old regional groundwater, which may serve to mitigate mine-derived high salinity waters. Rosebud Creek, which traverses the outflow zone of Miller Coulee in the study area, exhibited high sulfate concentrations during low flows and consistent downgradient increases in sulfate concentration. The possibility of plume dynamics in Miller Coulee suggests that the greatest water quality impacts may not yet have reached Rosebud Creek.

Montana↗

USGS2025

Combining multisite tsunami and deformation modeling to constrain slip distributions for the 1700 C.E. Cascadia earthquake

A major earthquake ruptured the Cascadia subduction zone (CSZ) on 26 January 1700. Key paleoseismic evidence associated with this event include tsunami deposits, stratigraphic evidence of coastal coseismic subsidence, written Japanese records of a tsunami unaccompanied by earthquake shaking, and margin‐wide turbidites found offshore and in lacustrine environments. Despite this wealth of independent clues, important details about this event remain unresolved. Dating uncertainties do not conclusively establish whether the proxies are from one earthquake or a sequence of them, and we have limited knowledge of the likely slip distributions of the event or events. Here, we use a catalog of 37,500 candidate synthetic ruptures between M w 7.8 and 9.2 and simulate their resulting coseismic deformation and tsunami inundation. Each model is then compared against estimated Japan tsunami arrivals, regional coastal subsidence records, and local paleotsunami deposits mapped at six different coastal marshes and one coastal lake along the CSZ. We find that seven full‐margin ruptures with a median magnitude of M w 9.1 satisfy all three constraints. We favor one M w 9.11 model that best matches all site paleoseismic observations and suggests that the Cascadia megathrust slipped up to ∼30 m and must have shallow geodetic coupling. We also find that some sequences composed of three or four ruptures can still satisfy the observations, yet no sequences of two ruptures can. Sequences are differentiated into three groups based on whether they contain a mainshock rupture located in the south (>44° N) or further north. All sequences contain unruptured portions of the megathrust and most contain mainshocks with peak slip above 40 m. The fit of the geologic evidence from sequences is poor in comparison to single‐event models. Therefore, sequences are generally less favored compared to full‐margin events.

British Columbia, California, Oregon, Washington↗

USGS2024

Methods for quantifying interactions between groundwater and surface water

Driven by the need for integrated management of groundwater (GW) and surface water (SW), quantification of GW–SW interactions and associated contaminant transport has become increasingly important. This is due to their substantial impact on water quantity and quality. In this review, we provide an overview of the methods developed over the past several decades to investigate GW–SW interactions. These methods include geophysical, hydrometric, and tracer techniques, as well as various modeling approaches. Different methods reveal valuable information on GW–SW interactions at different scales with their respective advantages and limitations. Interpreting data from these techniques can be challenging due to factors like scale effects, heterogeneous hydrogeological conditions, sediment variability, and complex spatiotemporal connections between GW and SW. To facilitate the selection of appropriate methods for specific sites, we discuss the strengths, weaknesses, and challenges of each technique, and we offer perspectives on knowledge gaps in the current science.

Annual Review of Environment and Resources↗

USGS1976

Medicine Lodge thrust system, east-central Idaho and southwest Montana

The Medicine Lodge thrust system, exposed in east-central Idaho and southwest Montana, is a major segment of the North America Cordilleran fold and thrust belt on which Precambrian and Paleozoic rocks have been telescoped and transported far east of their depositional area. The fault has overlapped rocks that initially were deposited in differing sedimentary environments on opposite sides of the northwest-trending geanticlinal Lemhi arch. The nature of the arch itself has been obscured by later thrusting, but it can be roughly reconstructed as a major landmass recurrently uplifted from Precambrian Y time at least through the Mesozoic. Although sections of the large landmass have been identified in the past as small islands, it was instead a southern extension of Belt island, and exerted a major influence on sedimentation patterns. The thrust has obscured recognition of correlative sedimentary rock units. It also appears to have controlled the distribution of volcanic rocks in satellite centers of the main field of Challis Volcanics. The thrust system has exerted a major influence on the emplacement of granodiorite-quartz monzonite stocks and related mineral deposits in east-central Idaho. Recognition of the fault as a major influence in intrusive activity and deposition of metallic mineral deposits suggests new possibilities for mineral resource exploration in this region. And consideration of the stratigraphic, paleogeographic, and structural framework of sedimentary rocks beneath the thrust suggests the possibility of petroleum and natural gas resources in the region north of the Snake River Plain.

Idaho, Montana↗