USGS Science⌕ Search

SEARCH · USGS Science

Results for “Geological Society of America Bulletin”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17Linked to original sources
USGS1987

The case for tectonic denudation by the Heart Mountain fault - A response

T wo basic concepts pertaining to the history of the Heart Mountain fault of northwestern Wyoming have recently been challenged; one, that there was tectonic denudation, and two, that volcanic rock of the Wapiti Formation was deposited on the exposed fault surface. Tectonic denudation is believed to have occurred as a consequence of the upper plate having broken into numerous blocks that separated as movement progressed along a nearly horizontal fault surface, thus leaving the fault surface exposed between blocks. Volcanic rocks of the Wapiti Formation were then deposited both on the exposed fault surface and against and over the upper-plate blocks. Two formations of Eocene volcanic rocks are involved. The older volcanic unit, the Cathedral Cliffs Formation, and the Paleozoic carbonate rocks are part of the upper plate of the Heart Mountain fault and moved with it, whereas the younger Wapiti Formation was deposited on the fault surface after movement had ceased. In an alternate interpretation recently advanced by T. A. Hauge, subdivisions of the Absaroka Volcanic Supergroup, of which the Cathedral Cliffs and Wapiti Formations are units, are not recognized. The upper plate of the Heart Mountain detachment is interpreted as having been a single, continuous allochthon composed largely of volcanic rocks with small amounts of Paleozoic rocks. During Heart Mountain faulting, extension of the once-continuous slab of Paleozoic sedimentary rock is alleged to have been accompanied by the formation of ten or more grabens, now filled predominantly by Absaroka volcanic rocks. This interpretation further proposes that the volcanic rocks were emplaced while the separating blocks of Paleozoic strata were still moving and that the basal part of the volcanic rock between these blocks is in fault contact rather than depositional contact with the strata beneath the Heart Mountain fault. Many lines of geologic field evidence indicate that the Wapiti Formation is younger than the Heart Mountain fault and was deposited on the technically denuded fault surface. (1) Wapiti rocks bury the break-away fault. (2) Fault breccia at the base of the upper-plate carbonate blocks is composed entirely of carbonate fault breccia and has no volcanic component. (3) Small blocks of upper-plate rocks have been displaced by gravity from the upper part of the allochthon to the detachment fault surface. (4) Eocene stream-channel deposits locally cut into the surface of tectonic denudation and also have been displaced on the Heart Mountain fault. (5) The volume of Wapiti Formation filling the spaces between allochthonous blocks in proportion to the volume of those blocks is much too great for the Wapiti to have been allochthonous. (6) Clastic dikes of carbonate fault breccia penetrate Wapiti volcanic rocks. (7) Some of these clastic dikes of fault breccia contain Precambrian xenoliths and wood phenoclasts requiring surface exposures of the fault breccia before injection as dikes. (8) Wapiti volcanic rocks having chilled borders are in tightly bonded contact with upper-plate Paleozoic rocks. (9) Faults present in the upper-plate blocks do not penetrate the overlying Wapiti Formation. (10) Volcanic fault breccia is absent where volcanic rocks overlie carbonate fault breccia. (11) A mound of carbonate fault breccia is not mixed with overlying Wapiti Formation. The continuous allochthon interpretation is based on several erroneous assumptions that cannot be supported by field observations. (1) Faults to transport and emplace the Wapiti Formation onto and along the Heart Mountain fault do not exist. (2) The contact between volcanic rocks and the allochthon west of Corral Creek at the west end of Cathedral Cliffs, cited by Hauge as a fault in an extending allochthon, is a depositional contact. (3) The volcanic rock adjoining allochthonous Paleozoic rocks north of Pilot Creek cannot be part of an extending allochthon because (a) it is Cathedral Cliffs Formation, which is pre–Heart Mountain fault, and (b) its direction of movement is horizontal rather than down dip, as required in an extending allochthon. (4) Most of the igneous dikes were intruded after the Heart Mountain fault movement ceased, and so they could not accommodate significant extension of the upper plate. (5) Striae reported as indicating fault emplacement of volcanic rock (Wapiti Formation) on the Heart Mountain fault actually lire flow features, formed as the Wapiti Formation was deposited on the exposed fault surface. Tectonic denudation is the only model that is consistent with evidence observable in the field. Although the process by which tectonic denudation was accomplished remains enigmatic, tectonic denudation remains a constraining fact in any model for the origin of the Heart Mountain fault.

Wyoming↗
USGS1987

A detailed chronology of the most recent eruption period at Mount Hood, Oregon

The most recent eruptive period of Mount Hood volcano, the Old Maid eruptive period, was characterized by volcano-hydrologic events (hydrologic events initiated by volcanic activity) which resulted in extensive lahar inundation in the White, Sandy, and Zigzag River drainages and produced a lithic pyroclastic flow which traveled at least 9 km down the White River from the vent area at Crater Rock. Interpretations of downstream textural changes in deposits indicate that one lahar reached as far as Tygh Valley (65 km from the vent) before transforming into a lahar runout (hyperconcentrated flow). The runout inundated Tygh Valley and flowed into the Deschutes River, 75 km (flow path) from the volcano. A single lahar traveled more than 30 km down the Sandy River before transforming to a runout. Correlative sands and gravels are found as far as the apex of the Sandy River delta, more than 80 km from the volcano; these suggest that the flow underwent minimal attenuation of stage height throughout the length of Sandy River. Approximate dates ranging from 1760 A.D. to 1810 A.D. for various Old Maid-age events are inferred from dendrochronologic studies of old growth trees. There have been no apparent major topographic changes in the vent area since the end of Old Maid-age activity, enabling the events of the Old Maid eruptive period to be used as a model for future eruptive activity.

Oregon↗
USGS1988

U.S. Geological Survey deep seismic reflection profile across the Gulf of Maine

Deep seismic reflection and magnetic data suggest that the Gulf of Maine is underlain by four crustal blocks of differing reflection and magnetic character. Two of these blocks, the Gulf of Maine fault zone and adjacent central plutonic zone, can be correlated with Avalonian rocks in southern New England and New Brunswick. The boundary between them, the Fundy fault, projects onshore near the Ponkapoag fault in southeastern Massachusetts in a region where no major crustal boundary has (yet) been identified. A third block, called the southern plutonic zone, is interpreted as Avalonian, although the reflection and magnetic data are ambiguous. The fourth block, along the rifted continental margin, is correlated with Meguma rocks of Nova Scotia. The late Paleozoic Variscan front crosses the Gulf of Maine within the Gulf of Maine fault zone and indicates significant compressional movement rather than strike-slip. The Moho surface throughout the region is essentially flat and may have been produced by Mesozoic crustal extension. Associated modification of the lower crust was minimal in the northern Gulf and may have been moderate in the central and southern Gulf. The Franklin rift basin formed by reactivation of the inferred Avalon-Meguma boundary beneath Georges Bank as a low-angle detachment.

Gulf of Maine↗
USGS1988

The formation and failure of natural dams

Of the numerous kinds of dams that form by natural processes, dams formed from landslides, glacial ice, and late-neoglacial moraines present the greatest threat to people and property. Landslide dams form in a wide range of physiographic settings. The most common types of mass movements that form landslide dams are rock and debris avalanches; rock and soil slumps and slides; and mud, debris, and earth flows. The most common initiation mechanisms for dam-forming landslides are excessive rainfall and snowmelt and earthquakes. Landslide dams can be classified into six categories based on their relation with the valley floor. Type I dams (11% of 184 landslide dams from around the world that we were able to classify) do not reach from one valley side to the other. Type II dams (44%) span the entire valley floor, in some cases depositing material high on opposite valley sides. Type III dams (41%) move considerable distances both upstream and downstream from the landslide failure. Type IV dams (<1%) are rare and involve the contemporaneous failure of material from both sides of a valley. Type V dams (<1%) also are rare and are created when a single landslide sends multiple tongues of debris into a valley and forms two or more landslide dams in the same reach of river. Type VI dams (3%) involve one or more failure surfaces that extend under the stream or valley and emerge on the opposite valley side. Many landslide dams fail shortly after formation. In our sample of 73 documented landslide-dam failures, 27% of the landslide dams failed less than 1 day after formation, and about 50% failed within 10 days. Over-topping is by far the most common cause of failure. The timing of failure and the magnitude of the resulting floods are controlled by dam size and geometry; material characteristics of the blockage; rate of inflow to the impoundment; size and depth of the impoundment; bedrock control of flow; and engineering controls such as artificial spill-ways, diversions, tunnels, and planned breaching by blasting or conventional excavation. Glacial-ice dams can produce at least nine kinds of ice-dammed lakes. The most dangerous are lakes formed in main valleys dammed by tributary glaciers. Failure can occur by erosion of a drainage tunnel under or through the ice dam or by a channel over the ice dam. Cold polar-ice dams generally drain supraglacially or marginally by downmelting of an outlet channel. Warmer, temperate-ice dams tend to fail by sudden englacial or subglacial breaching and drainage. Late-neoglacial moraine-dammed lakes are located in steep mountain areas affected by the advances and retreats of valley glaciers in the last several centuries. These late-neoglacial dams pose hazards because (1) they are sufficiently young that vegetation has not stabilized their slopes, (2) many dam faces are steeper than the angle of repose, (3) these dams and lakes are immediately downslope from steep crevassed glaciers and near-vertical rock slopes, and (4) downstream from these dams are steep canyons with easily erodible materials that can be incorporated in the flow and increase flood peaks. The most common reported failure mechanism is overtopping and breaching by a wave or series of waves in the lake generated by icefalls, rockfalls, or snow or rock avalanches. Melting of ice cores or frozen ground and piping and seepage are other possible failure mechanisms. Natural dams may cause upstream flooding as the lake rises and downstream flooding as a result of failure of the dam. Although data are few, for the same potential energy at the dam site, ownstream flood peaks from the failure of glacier-ice dams are smaller than those from landslide, moraine, and structed earth-fill and rock-fill dam failures. Moraine-dam failures appear to produce some of the largest downstream flood peaks for potential energy at the dam site greater than 10 11 -10 12 joules. Differences in flood peaks natural-dam failures appear to be controlled by dam characteristics and failure mechanisms.

Geological Society of America Bulletin↗
USGS1988

Three decades of geochronologic studies in the New England Appalachians

Over the past 30 years, both isotope geochronology and plate tectonics grew from infancy into authoritative disciplines in the geological sciences. Previously, mountain systems like the Appalachians had been viewed almost entirely in the context of the classical geosyncline, implying a gradualism in stratigraphic and structural change throughout the orogen. Age control, determined largely from distant fossiliferous strata, was unabashedly carried to high-grade metamorphic rocks based only on lithological correlations. With the new concepts in tectonics came the realization that abrupt breaks in stratigraphy and structure occur in many cases at the boundaries of lithotectonic zones. Fortunately, the new techniques of isotope geochronology could be brought to bear directly on the rocks of the immediate study area. This paper chronicles some of the major contributions to the geology of the New England Appalachians that resulted from these efforts during the past three decades. In tracing the history of geochronologic research, one encounters an increasingly sophisticated approach to the analytical and interpretive aspects of the discipline. Today, the geochronologist can, under optimum conditions, constrain the age of stratigraphic units, igneous activity, deformation, and metamorphism with accuracy that is capable of resolving fine structure within individual orogenic pulses. He participates in full partnership with other colleagues of the science in unravelling the mysteries of mountain building. Several of the topical problems of New England geology in which geochronology played a key role include (1) the recognition and delineation of Avalonia as a Late Proterozoic eastern basement distinct from more western terranes, (2) the dating of the White Mountain Plutonic-Volcanic Suite, a Mesozoic igneous event spanning 100 m.y., and (3) the temporal and spatial separation of structural and metamorphic features imprinted by the Taconic and Acadian orogenies. The existing geochronology is summarized into a map and table emphasizing the temporal construction of the New England Appalachians. By using lithotectonic zones as the building blocks of the orogen, seven such zones are defined in terms of pre-, syn-, and post-assembly geologic history. From west to east, these lithotectonic zones are (1) Berkshire-Green Mountain, (2) Rowe-Hawley, (3) Connecticut Valley, (4) Bronson Hill, (5) Kearsarge-Central Maine, (6) Tatnic Hill-Nashoba, and (7) Avalonia. Avalonia is further divided into three subzones, Hope Valley, Esmond-Dedham, and Penobscot Bay, which themselves may have had distinct origins and assembly histories. The boundaries between these zones are faults in most cases, some of which may have had recurring movement to further complicate any plate-tectonic scenario. A delineation of underlying Grenvillian, Chain Lakes, and Avalonian basement is also attempted, which now can make use of isotopes in igneous rocks as petrogenetic indicators to supplement the rare occurrences of basement outcrop within mobile zones of the orogen. The belt of Permian thermal disturbance within the Kearsarge-Central Maine zone is hypothesized to reflect rapid rebound following compressional thickening of underlying Avalonian basement during the Alleghanian orogeny.

Geological Society of America Bulletin↗
USGS1988

Limestone and chert in tectonic blocks from the Esk Head subterrane, South Island, New Zealand

The Esk Head subterrane is a continuous belt, generally 10-20 km wide, of tectonic mélange and broken formation on the South Island of New Zealand. This subterrane separates older and younger parts of the Torlesse terrane which is an extensive accretionary prism composed mostly of quartzo-feldspathic, submarine-fan deposits ranging from Permian to Early Cretaceous in age. The Torlesse is the most Pacific-ward of several Permian and Mesozoic accreted terranes in New Zealand that record tectonic amalgamation and ultimate accretion against the Pacific-facing Gondwana margin. The Esk Head subterrane of the Torlesse is especially informative because it includes within it conspicuous tectonic blocks of submarine basalt and a variety of basalt-associated seamount and sea-floor limestones and cherty rocks thought to be representative of the subducted plate. Limestones in tectonic blocks are of Late Triassic and probably Jurassic ages and include (1) submarine-cemented, pelagic-bivalve, geopetal packstone-grainstone; (2) brachiopod-bryozoan encrinite; and (3) radiolarian, pelagic lime mudstone. Most of the Triassic blocks have been dated using conodonts which have remarkably low color alteration index (CAI) values (<1.5). An incomplete sampling of cherts in tectonic blocks and from Holocene gravels derived from the Esk Head subterrane yields radiolarian-based ages of Late Triassic, Early Jurassic, Middle Jurassic, and Late Jurassic. Paleogeographic inferences drawn from megafossils, bioclasts, and radiolarians, as well as from carbonate cements, indicate deposition of the oceanic sedimentary rocks at paleolatitudes somewhat lower than that of the New Zealand part of the Gondwana margin, but higher than paleoequatorial latitudes. These oceanic sediments and their basaltic substrates were evidently emplaced in the Torlesse accretionary prism following off-scraping from an extensive subducting oceanic plate, probably the Phoenix plate, which was obliquely convergent with the northwest-trending Gondwana margin during Late Jurassic and/or Early Cretaceous time.

Geological Society of America Bulletin↗
USGS1988

Seismic imaging of extended crust with emphasis on the western United States

Understanding of the crust has improved dramatically following the application of seismic reflection and refraction techniques to studies of the deep crust. This is particularly true in areas where the last tectonic event was extensional, such as the Basin and Range province of the western United States and much of western Europe. In these regions, a characteristic reflective pattern has emerged, whereby the lower crust is highly reflective and the upper crust and upper mantle are either poorly reflective or strikingly nonreflective. In the metamorphic-core-complex belt in the western United States, where extension can be as much as an order of magnitude greater than in the more classic continental rift zones, the lower crustal reflectivity thickens and rises, yielding a picture of a crust that is reflective throughout. Synthetic seismic studies have documented that the reflectivity in these regions can be modeled by numerous laminae tens of meters thick and hundreds of meters across, characterized by inter-layered high and low velocities. Two geologic factors are interpreted as contributing to this layered character: ductile strain, responding to stress in the thermally weakened middle and lower crust, and intrusive layering, corresponding to injection of subhorizontal sheets of mantle-derived magmas. These two processes yield a variety of geologic structures, including transposed compositional layering, mylonitic ductile shear zones, and intrusive mafic sheets, all of which occur at the proper scales to cause the prominent reflectivity observed. If metamorphic core complexes are representative of extended continental crust world-wide, then these results suggest that magmatism and ductile flow have also contributed to the evolution of the middle and lower crust in many other areas around the world.

Geological Society of America Bulletin↗
USGS1988

Relic magma chamber structures preserved within the Mesozoic North Atlantic crust?

The North Atlantic Transect seismic reflection data, collected southwest of Bermuda, have been reinterpreted following post-stack migration and reveal two major intracrustal reflections. The shallower of these two events, located ∼1 s below the igneous basement, is a subhorizontal, undulating surface that in some places is continuous for as much as 10 km. On the basis of its position within the section and its laterally discontinuous nature, we believe that this upper crustal reflection corresponds to the intermittently sharp contact between the sheeted dikes and the underlying isotropic gabbro. A second set of lower crustal reflections, dipping ∼20°-40° eastward, is also prominent on the migrated profile and terminates downdip against the subhorizontal reflection Moho. Several lines of evidence argue against these features being either artifacts or out-of-the-plane events. Instead, their presence may be ascribed either to crustal-penetrating fault zones or to mafic-ultramafic cumulate layers frozen into the oceanic crust at the time of formation at the paleo-spreading center. Because of the laminated character of these events and their typical occurrence within 1.0 to 1.5 s of the reflection Moho, we prefer a compositional versus a structural interpretation for their origin. The gradual thinning in the crust approaching the fracture zones is shown to be more complex than was originally inferred; although the interpretation that the crust gradually thins toward fracture zones may still apply in a few localities, significant departures are recognized elsewhere. Similarly, the improved image on the migrated profile documents an increase in complexity across the localized region directly surrounding the Blake Spur fracture zone. An interpretation advocating crustal thickening in this narrow zone is proposed as an alternative to the crustal-thinning model of Mutter and others.

Geological Society of America Bulletin↗
USGS1989

The structural geometry and evolution of foreland thrust systems, northern Virginia

Seismic reflection data reveal that the structural geometry of the central Appalachians of northern Virginia consists of three distinct thrust systems. Each thrust system is characterized by a unique internal geometry.The Blue Ridge thrust sheet is a composite thrust sheet composed primarily of imbricated Precambrian crystalline rocks. It over-rode Cambrian-Ordovician carbonates and formed a sheared, basement-cored fault-bend fold. Thrusts within the sheet may be Taconic and earliest Alleghanian, whereas final thrusting and emplacement of the sheet were probably slightly younger but still early Alleghanian. The North Mountain thrust sheet is characterized by imbricated Cambrian-Ordovician carbonates that are deformed into large-amplitude mode II fault-bend folds and fault-propagation folds. Rocks of this sheet were transported more than 60 km across a similar section of carbonates. The leading edge of the North Mountain thrust sheet was deformed into a fold with a mode II fault-bend fold geometry and was juxtaposed against middle Paleozoic rocks. The middle Paleozoic rocks occur in a ramp across which displacement along the North Mountain thrust was transferred to a higher detachment. More than 60 km of cover rocks displaced during the emplacement of the North Mountain thrust sheet either were transported across this ramp and thrust over a similar section in the western Valley and Ridge province or were backthrust above the sheet. The timing for imbrication and emplacement of the North Mountain thrust sheet is probably Main Phase Alleghanian. The Lower Carbonate duplex extends from beneath the Blue Ridge and North Mountain thrust sheets, westward across the western Valley and Ridge province. The Lower Carbonate duplex is characterized by imbricated Cambrian-Ordovician carbonates that form low-amplitude fault-bend folds. This thrust system also probably formed during Main Phase Alleghanian deformation.

Virginia↗
USGS1989

Significance of new potassium-argon ages from the Goldens Ranch and Moroni Formations, Sanpete-Sevier Valley area, central Utah

Exposures of volcanic-sedimentary strata are widely distributed within central Utah. We believe that these volcanic and stratified sedimentary rocks, known by different formational names in different parts of this region, are, in fact, segments of one and the same suite of rocks that formed during the early and middle Tertiary. The volcanic-sedimentary complex is exposed on both sides of a north-trending lowland formed by the collinear Juab and Sevier Valleys. West of the lowland, the complex has been named the "Goldens Ranch Formation" east of the lowland, it has been called the "Moroni Formation."; Both formations are stratigraphically alike in that each consists of a lower unit composed predominantly of water-laid, variably cemented sediments and sedimentary rocks with some tuff beds near the base, and an upper unit of intermediate-composition volcanic rocks, chiefly ash-flow tuffs, and volcanic breccias. Both formations contain abundant exotic clasts of andesite, tan and purple quartzite, and dark blue limestone and dolomite. Both formations are folded and faulted along with the underlying sedimentary units. Potassium-argon ages indicate that both the Goldens Ranch and Moroni Formations formed during the late Eocene to middle Oligocene. The geochronology and stratigraphic relations are strong evidence that the Goldens Ranch and Moroni Formations are correlative, and that they are one and the same depositional unit. During the latest Oligocene-earliest Miocene, minor monzonitic bodies intruded sedimentary units in the area. The new K-Ar data bear on the matter of the origin of the complex structural deformation in central Utah. Different workers have attributed the singular deformation either to recurrent episodes of compression stemming from the Sevier orogeny, or to repeated episodes of salt diapirism. We recognize two sequences of repeated deformation: one that occurred prior to deposition and consolidation of the Goldens Ranch and Moroni Formations, and a second that occurred after these formations were emplaced, in essence, after early Oligocene time. The Sevier orogeny ended in Paleocene time; thus, the compression and thrusting stemming from the Sevier orogeny could be responsible for the structural complexity that marks pre-Paleocene units. These same orogenic forces do not seem to be viable explanations for the broad flexures and monoclinal downwarps that mark the Goldens Ranch, Moroni, and younger formations. In our view, multiple episodes of salt diapirism more reasonably explain the structural complexity in central Utah.

Utah↗
USGS1989

Diapiric transfer of melt in Kilauea Iki lava lake, Hawaii: A quick, efficient process of igneous differentiation

Kilauea Iki lava lake, formed in 1959, is a large pond of picritic basalt (average MgO content = 15.34% by weight), which has cooled and crystallized as a small, self-roofed magma chamber. Repeated drilling of the upper crust of the lake, down to its molten core, and more recent (1981) drilling, through the thermal maximum and part way through the lower crust, have made it possible to monitor the differentiation processes in the lake in detail. Differentiation processes recognized as active in the lake include rather inefficient settling of the larger (2-10 mm) olivine phenocrysts, formation of segregation veins, and formation of diapir-like vertical olivine-rich bodies, all processes which occur in one or more of the other Kilauean lava lakes as well. In addition, most of the central part of Kilauea Iki has been affected by diapiric melt transfer. In this process, relatively low-density liquid, present at 1145-1160 °C, rose from within the loose crystal mush at the base of the lens of melt and intruded the equivalent thermal horizon at the top of the lens of melt, passing through the hotter but denser melt in the core of the lake without mixing. The source volume from which the low-density liquid was extracted is depleted in TiO 2 and other incompatible elements and enriched in FeO and CaO. The upper part of the lake shows the opposite effects. The crystalline assemblage present was olivine + augite + minor plagioclase. The crystallinity of both the source and receiving layers was low enough that no obvious textural imprint was left by the transfer process; the principal evidence for its occurrence is the chemical zonation of the lake seen in core from depths of 13 to 80 m. Diapiric melt transfer was active from 1960 to 1971 and has affected most of the central part of the lake from 13 m to at least 80 m. The process ran simultaneously with the other three main differentia tion processes but started and stopped independently of the others. Calculations suggest that between 21 and 42 wt % liquid has been extracted from the depleted zone at 56-78 m in the center of the lake, making this a very efficient process of chemical differentiation.

Hawaii↗
USGS1989

Geohydrology of the Laura fresh-water lens, Majuro atoll: A hydrogeochemical approach

In small limestone islands, the depositional history and subsequent chemical interactions between ground water and the aquifer host rock play critical roles in the occurrence, movement, and chemical quality of ground water. The hydrogeochemistry of the Laura fresh-water lens, Majuro atoll, Marshall Islands, is an example of these relations. Laura is underlain by two principal hydrologic units. The upper unit is a back-reef-marginal-lagoonal deposit which formed during the Holocene interglacial stage. It is composed of moderately permeable carbonate sediments. The lower hydrologic unit consists of highly permeable limestone that was subaerially exposed, most likely during a Pleistocene glacial lowstand. Similar stratification is found at Bikini and Enewetak atolls. The upper hydrologic unit contains a calcium bicarbonate-rich fresh-water lens, in which a potable fresh-water nucleus as much as 14 m thick occurs on the lagoon side of the island. Storage in the fresh-water nucleus ranged from 1.70 x 10 6 to 2.08 x 10 6 m 3 during 1984-1985. Ground-water occurrence and flow are governed by an asymmetric distribution of lithofacies about the longitudinal axis of the island and an abrupt increase in permeability at the contact between the upper and lower hydrologic units. The highly permeable lower hydrologic unit contains sea water and truncates the fresh-water-sea-water mixing zone. The fresh-water lens and associated fresh-water-sea-water mixing zone are the site of continuously occurring diagenetic reactions that significantly affect the porosity and permeability of the aquifer. Non-equilibrium dissolution-precipitation reactions, coupled with variations in CO 2 input, control the chemical evolution of Laura ground water. At the present rate of chemical weathering, 465 m 3 of sediment are being dissolved and transported to the sea by ground water each year. This dissolution results in an annual increase in porosity of 0.01%. The primary factors controlling the occurrence and flow of ground water in the leeward reef islet of Laura are (1) the depositional history of the upper hydrologic unit, which has resulted in a greater accumulation of low-permeability (fine-grained) sediments beneath the lagoon side of the island and a high- to low-permeability (coarse-to fine-grained sediment) gradation between the ocean and lagoon; and (2) the diagenetic history of the lower hydrologic unit, which has resulted in a highly permeable basement.

Geological Society of America Bulletin↗
USGS1989

Oligocene caldera complex and calc-alkaline tuffs and lavas of the Indian Peak volcanic field, Nevada and Utah

The Indian Peak volcanic field is representative of the more than 50,000 km 3 of ash-flow tuff and tens of calderas in the Great Basin that formed during the Oligocene-early Miocene "ignimbrite flareup" in southwestern North America. The field formed about 32 to 27 Ma in the southeastern Great Basin and consists of the centrally positioned Indian Peak caldera complex and a surrounding blanket of related ash-flow sheets distributed over an area of about 55,000 km 2 . The field has a volume on the order of 10,000 km 3 . A cluster of two obscure source areas and four calderas comprise the ∼80 x 120 km caldera complex. Only minor volumes of rhyolite and two pyroxene andesite lavas were extruded episodically throughout the lifetime of the magma system that formed the field, chiefly during its youth and old age. Six ash-flow sequences alternate between rhyolite and dacite in a volume ratio of about 1:8, and a culminating seventh is trachytic. The first, fourth, and sixth tuff units are of rhyolite that contains sparse to modest amounts of phenocrysts, chiefly plagioclase and biotite, and abundant lithic and pumice lapilli; these deposits are confined within the caldera complex and form multiple and compound cooling units that are normally zoned with respect to bulk chemical composition and crystal type, content, and size. The second, third, and fifth tuff sequences are of crystal-rich dacite that forms extensive simple cooling-unit outflow sheets and partial caldera fillings of compound cooling units. Each dacite unit contains similar amounts of plagioclase, biotite, hornblende, quartz, two pyroxenes, and Fe-Ti oxides; trace amounts of sanidine and titanite also occur in the youngest. Cognate inclusions in the dacites show only slight intra- and inter-unit differences in bulk chemical composition. The seventh eruptive sequence consists of several cooling units of trachydacite tuff containing small to modest amounts of plagioclase and two pyroxenes. These dominantly high-K calc-alkaline rocks are a record of the birth, maturation, and death of a large, open, continental magma system that was probably initiated and sustained by influx of mafic magma derived from a southward-migrating locus of magma production in the mantle. The small volumes of chemically diverse andesitic rocks were derived from separately evolving magma bodies but are modified representatives of the mantle power supply. Recurrent production of very large batches (some greater than 3,000 km 3 ) of quite uniform dacite magmas appears to have required combination of andesite magma and crustal silicic material in vigorously convecting chambers. Compositional data indicate that rhyolites are polygenetic. As the main locus of mantle magma production shifted southward, trachydacite magma could have been produced by fractionation of andesitic magma within the crust.

Nevada, Utah↗
USGS1989

Thrust faults and related structures in the crater floor of Mount St. Helens volcano, Washington

A lava dome was built in the crater of Mount St. Helens by intermittent intrusion and extrusion of dacite lava between 1980 and 1986. Spectacular ground deformation was associated with the dome building events and included the development of a system of radial cracks and tangential thrust faults in the surrounding crater floor. These cracks and thrusts, best developed and studied in 1981-1982, formed because the crater fill was displaced upward and radially outward from the feeder conduit, owing to rising magma. Radial cracks formed first and, as some evolved into strike-slip tear faults, influenced the subsequent geometry of thrusting. Once faulting began, deformation was localized near the thrust scarps and their bounding tear faults. The magnitude of displacements systematically increased before extrusions, whereas the azimuth and inclination of displacements remained relatively constant. The thrust-fault scarps were bulbous in profile, lobate in plan, and steepened during continued fault movement. The hanging walls of each thrust were increasingly disrupted as cumulative fault slip increased. The crater fill was unconsolidated to weakly consolidated near the surface and influenced the morphology of the thrust-fault scarps. Similar structures have been produced by active thrust faults in other areas with unconsolidated alluvium at the surface, and in laboratory sandbox experiments.

Washington↗
USGS1990

Integration of COCORP deep reflection and magnetic anomaly analysis in the southeastern United States: Implications for origin of the Brunswick and East Coast magnetic anomalies: Alternative interpretation and reply

Integration of magnetic anomaly analysis with COCORP deep reflection data from the southeastern United States provides three new constraints on the interpretation of the Brunswick and East Coast magnetic anomalies, as well as on the reflection data. These are as follows. (1) The source of the Brunswick anomaly lies within the deep crust. This anomaly is not caused by a Mesozoic rift basin, as proposed by some workers. (2) A simple, seaward-dipping, high- susceptibility slab model can explain both the Brunswick and East Coast magnetic anomalies. The along-strike change in character of the two anomalies results largely from a change in azimuth of the source body. (3) Beneath the southeastern United States, this source body dips south, lies immediately on the south flank of the prominent southward-dipping reflective zone revealed on COCORP surveys, and was previously associated with the Alleghanian suture between North America and Africa. These results imply that a dipping, highly magnetized zone in the upper plate of the Alleghanian suture is responsible for both the Brunswick and East Coast magnetic anomalies. The high- susceptibility material responsible for these anomalies might be mafic lower continental or oceanic crust thrust upward during Alleghanian continental collision, or mafic igneous material intruded into the upper plate of the suture zone during subsequent Mesozoic rifting, or both. The latter hypothesis implies that the Alleghanian suture acted, as a zone of weakness (a repository ?) which was reactivated to control the site of ultimate Atlantic rifting and possibly initial sea-floor spreading.

Geological Society of America Bulletin↗
USGS1990

Pore pressure response during failure in soils

Three experiments were performed on natural slopes to investigate variations of soil pore-water pressure during induced slope failure. Two sites in the Wasatch Range, Utah, and one site in the San Dimas Experimental Forest of southern California were forced to fail by artificial subsurface irrigation. The sites were instrumented with electronic piezometers and displacement meters to record induced pore pressures and movements of the slopes during failure. Piezometer records show a consistent trend of increasing pressure during the early stages of infiltration and abrupt decreases in pressure from 5 to 50 minutes before failure. Displacement meters failed to register the amount of movement, due to location and ineffectual coupling of meter pins to soil. Observations during the experiments indicate that fractures and macropores controlled the flow of water through the slope and that both water-flow paths and permeability within the slopes were not constant in space or time but changed continually during the course of the experiments.

California, Utah↗
USGS1990

Origin of Florida Canyon and the role of spring sapping on the formation of submarine box canyons

Florida Canyon, one of a series of major submarine canyons on the southwestern edge of the Florida Platform, was surveyed using GLORIA, SeaBeam, and Deep-Tow technologies, and it was directly observed during three DSRV Alvin dives. Florida Canyon exhibits two distinct morphologies: a broad V-shaped upper canyon and a deeply entrenched, flat-floored, U-shaped lower canyon. The flat- floored lower canyon extends 20 km into the Florida Platform from the abyssal Gulf. The lower canyon ends abruptly at an &sim;3 km in diameter semicircular headwall that rises 750 m with a >60&deg; slope angle to the foot of the upper canyon. The sides of the lower canyon are less steep than its headwall and are characterized by straight faces that occur along preferred orientations and indicate a strong joint control. The upper canyon is characterized by a gently sloping, straight V-shaped central valley cut into a broad terrace. The flat floor of the upper canyon continues as terraces along the upper walls of the lower canyon. On the flanks of the upper canyon, there are five >50-m-deep, >0.5-km-wide, closed sink-hole-like depressions which indicate subsurface dissolution within the platform. The origin of the lower canyon is difficult to explain with traditional models of submarine canyon formation by external physical processes. The movement of ground water, probably with high salinities and reduced compounds along regional joints, may have focused the corrosive force of submarine spring sapping at the head of the lower canyon to produce the canyon's present shape.

Florida Canyon↗
USGS1990

Tectonic erosion along the Japan and Peru convergent margins

The volume of material removed by subduction erosion can be estimated quantitatively if the position of the volcanic arc, the position of the paleotrench axis, and a paleo-depth reference surface are known. Estimates based on these parameters along the Japan and Peru Trenches indicate rates of erosion comparable to well-known rates of accretion. Proposed erosional mechanisms along the plate boundary, where horsts on the lower plate abrade the upper one, appear insufficient to handle the minimum volumes of eroded material. Some mechanisms of tectonic erosion at the base of the trench slope can be observed at colliding seamounts and ridges where structures are large enough to be seismically imaged. Local tectonic erosion of the lower slope of the Japan Trench resulted when seamounts entered the subduction zone, uplifted the slope, and oversteepened it. The oversteepened slope failed, debris slumped into the trench axis, and much of it was then subducted. Where a seamount was subducted, a large re-entrant was left in the slope, which filled rapidly by local accretion of abundant sediment. Subduction of the oblique-trending Nazca Ridge off Peru produced many similar structures. Erosion is dominated by uplift and breakup of the lower slope, with subduction of the debris rather than abrasion under high-stress conditions. Another form of tectonic erosion occurs along the base of the upper plate. Its magnitude is indicated by massive subsidence along the margin; however, because of deep burial, the structure resulting from basal erosion is rarely imaged in seismic records. The volume of material eroded along the base of the upper plate exceeds that eroded from the front of the lower slope.

Pacific Ocean↗