SEARCH · USGS Science

Results for “Applied Economics”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17Linked to original sources

USGS2025

Update of the 2008 provisional Enhanced Geothermal Systems (EGS) assessment for the Great Basin, USA

In response to the Energy Act of 2020, the U.S. Geological Survey (USGS) is updating the Enhanced Geothermal Systems (EGS) resource assessment for the Great Basin, USA. The previous 2008 provisional assessment estimated how much electricity could be generated from EGS resources of the western United States using models of electric-grade heat, models of heat extraction over time, and estimates of how much rock might be stimulated to produce viable amounts of heat. Herein, a similar conceptual strategy is applied, using updated models of heat extraction as a function of fracture spacing and well distance. Previously used reservoir heat delivery models are updated to have a dependence on fracture and well spacing, potentially improving future estimates of EGS resources as ongoing research provides a better understanding about the success of reservoir stimulation as a function of geology and location. For a range of well distances (250-1000 m) and fracture spacings (1-50 m), heat extraction efficiency ranges from 25-62%, demonstrating the importance of accounting for the most likely results of proven viable fracturing technologies. Although fracturing is important, the biggest uncertainty by far in estimating the EGS resource for the Great Basin is estimating which geologic units at what depths can be stimulated sufficiently to produce geothermal energy economically and efficiently. Uncertainties in these factors yield estimates that range over two orders of magnitude with an upper limit of ~174 terawatts-thermal (TWth) produced for 30 years from the upper 7 km of the crust. This upper limit would require significant technological advances to access most of the electric-grade resource across the Great Basin. Assuming that 1% of this estimate will be accessible in the next few decades gives a resource estimate similar to that made in the 2008 provisional assessment. These estimated EGS heat extraction rates far exceed ( greater than 100x) the natural geothermal heat production rate, thus geothermal electricity production at these rates might not be sustainable unless heat is also recharged from other sources (e.g., excess solar energy when supply exceeds demand). In addition to assessment maps and cumulative estimates, the new models of fractured reservoirs developed herein can be used to estimate steady power production given a set of fractures and well spacing, and estimates can be made for setback distances to ensure no thermal interference with nearby powerplants.

Arizona, California, Idaho, Nevada, Oregon, Utah↗

USGS2026

Sustainability trade-offs at the nexus of solar energy, agriculture, and biodiversity

A rapid transition to renewable energy is necessary for achieving global decarbonization targets, but siting conflicts, particularly beyond the built environment, remain a key barrier to sustainable development. At the same time, climate-induced pressures on biodiversity intensify the socio-ecological trade-offs within the energy-agriculture-biodiversity nexus. Using New York State as a case study, we assess the geographic implications of utility-scale solar energy development under competing land-use priorities. We apply a mixed-integer linear programming (MILP) optimization model to evaluate solar buildout across three distinct scenarios: minimizing cost, prioritizing agricultural preservation, and conserving biodiversity, employing a lexicographic hierarchy to enforce a strict ordering of stakeholder priorities. Results indicate that New York can meet its mid-century decarbonization goals by deploying 46,216 MW dc of solar energy, however, achieving this goal involves considerable land-use trade-offs. A cost-minimizing scenario disproportionately targets pasture and hay lands (>40,000 ha), nearly half of which overlap with grassland bird habitat and broader biodiversity areas. Prioritizing agriculture spares ∼80 % of farmland but creates potential for deforestation of over 41,000 ha. Biodiversity-conscious siting avoids ecologically sensitive areas and increases the annualized total costs by 0.17 %, indicating economic feasibility. Our findings highlight the need for spatially informed, integrative land-use strategies that reconcile climate goals with ecological and agricultural values. By linking geospatial optimization with socio-ecological criteria, this work contributes a transferable framework to inform just and ecologically responsible energy transitions in multifunctional landscapes, offering new insights into how geography can advance sustainable development.

New York↗

USGS2022

Peak-flow and low-flow magnitude estimates at defined frequencies and durations for nontidal streams in Delaware

Reliable estimates of the magnitude of peak flows in streams are required for the economical and safe design of transportation and water conveyance structures. In addition, reliable estimates of the magnitude of low flows at defined frequencies and durations are needed for meeting regulatory requirements, quantifying base flows in streams and rivers, and evaluating time of travel and dilution of toxic spills. This report, in cooperation with the Delaware Department of Transportation and the Delaware Geological Survey, presents methods for estimating the magnitude of peak flows and low flows at defined frequencies and durations on nontidal streams in Delaware, at locations both monitored by streamflow-gage sites and ungaged. Methods are presented for estimating (1) the magnitude of peak flows for return periods ranging from 2 to 500 years (50-percent to 0.2-percent annual-exceedance probability), and (2) the magnitude of low flows as applied to 7-, 14-, and 30-consecutive day low-flow periods with recurrence intervals of 2, 10, and 20 years (50-, 10-, and 5-percent annual non-exceedance probabilities). These methods are applicable to watersheds that exhibit a full range of development conditions in Delaware. The report also describes StreamStats, a web application that allows users to easily obtain peak-flow and low-flow magnitude estimates for user-selected locations in Delaware. Peak-flow and low-flow magnitude estimates for ungaged sites are obtained using statistical regression analysis through a process known as regionalization, where information from a group of streamflow-gage sites within a region forms the basis for estimates for ungaged sites within the same region. Ninety-four streamflow-gage sites in and near Delaware with at least 10 years of nonregulated annual peak-flow data were used for the peak-flow regression analysis, a subset of the 121 sites for which peak-flow estimates were computed. These sites included both continuous-record streamflow-gage sites as well as partial record sites. Forty-five streamflow-gage sites with at least 10 years of nonregulated low-flow data available were used for the low-flow regression analyses, a subset of the 68 sites for which low-flow estimates were computed. Estimates for gaged sites are obtained by combining (1) the station peak-flow statistics (mean, standard deviation, and skew) and peak-flow estimates using the recent Bulletin 17C guidelines that incorporate the Expected Moments Algorithm with (2) regional estimates of peak-flow magnitude derived from regional regression equations and regional skew derived from sites with records greater than or equal to 35 years. Example peak-flow estimate calculations using the methods presented in the report are given for (1) ungaged sites, (2) gaged sites, (3) sites upstream or downstream from a gaged location, and (4) sites between gaged locations. Estimates for low-flow gaged sites are obtained by combining (1) the station low-flow statistics (mean, standard deviation, and skew) and low-flow estimates with (2) regional estimates of low-flow magnitude derived from regional regression equations. Example low-flow estimate calculations using the methods presented in the report are given for (1) ungaged sites, (2) gaged sites, (3) sites upstream or downstream from a gaged location, and (4) sites between gaged locations. A total of 54 sites in the Coastal Plain region were used to develop peak-flow regressions for the region and 40 sites were used for the Piedmont region. Similarly, 24 sites were used for low-flow regression equation development in the Coastal Plain, with 21 in the Piedmont. Peak and low-flow site inclusion in the Coastal Plain tended to be more restricted with tidal influence and ranges of basin characteristics, including drainage area, limiting regression equation development and application. Regional regression equations for peak flows and low flows, as applicable to ungaged sites in the Piedmont and Coastal Plain Physiographic Provinces in Delaware, are presented. Peak-flow regression equations used variables that quantified drainage area, basin slope, percent area with well-drained soils, percent area with poorly drained soils, impervious area, and percent area of surface water storage in estimating peak-flow estimates, whereas low-flow regression equations used only drainage area and percent poorly drained soils in the estimation of low flows. Average standard errors for peak-flow regressions tended to be lower than those for low- flow regressions, with lower errors in the Piedmont region for both peak- and low-flow regressions. For peak-flow estimates, a sensitivity analysis of Piedmont regression equation estimates to changes in impervious area is also presented. Additional topics associated with the analyses performed during the study are discussed, including (1) the availability and description of 32 basin and climatic characteristics considered during the development of the regional regression equations; (2) the treatment of increasing trends in the annual peak-flow series identified at 18 gaged sites and inclusion in or exclusion from the regional analysis; (3) regional skew analysis and determination of regression regions; (4) sample adjustments and removal of sites owing to regulation and redundancy; and (5) a brief comparison of peak- and low-flow estimates at gages used in previous studies.

Delaware↗

USGS2014

USGS ecosystem research for the next decade: advancing discovery and application in parks and protected areas through collaboration

Ecosystems within parks and protected areas in the United States and throughout the world are being transformed at an unprecedented rate. Changes associated with natural hazards, greenhouse gas emissions, and increasing demands for water, food, land, energy and mineral resources are placing urgency on sound decision making that will help sustain our Nation’s economic and environmental well-being (Millennium Ecosystem Assessment, 2005). In recognition of the importance of science in making these decisions, the U.S. Geological Survey (USGS) in 2007 identified ecosystem science as one of six science directions included in a comprehensive decadal strategy (USGS 2007). The Ecosystems Mission Area was identified as essential for integrating activity within the USGS and as a key to enhanced integration with other Federal and private sector research and management organizations (Myers at al., 2007). This paper focuses on benefits to parks and protected areas from the USGS Ecosystems Mission Area plan that expanded the scope of the original 2007 science strategy, to identify the Bureau’s work in ecosystem science over the next decade (Williams et al., 2013). The plan describes a framework that encompasses both basic and applied science and allows the USGS to continue to contribute meaningfully to conservation and management issues related to the Nation’s parks and ecological resources. This framework relies on maintaining long-standing, collaborative relationships with partners in both conducting science and applying scientific results. Here we summarize the major components of the USGS Ecosystems Science Strategy, articulating the vision, goals and strategic approaches, then outlining some of the proposed actions that will ultimately prove useful to those managing parks and protected areas. We end with a discussion on the future of ecosystem science for the USGS and how it can be used to evaluate ecosystem change and the associated consequences to management of our Nation’s natural resources.

The George Wright Forum↗

USGS2005

Decision making with environmental indices

Since Ott's seminal book on environmental indices (1978), the use of indices has expanded into several natural resource disciplines, including ecological studies, environmental policymaking, and agricultural economics. However, despite their increasing use in natural resource disciplines, researchers and public decision makers continue to express concern about validity of these instruments to capture and communicate multidimensional, and sometimes disparate, characteristics of research data and stakeholder interests. Our purpose is to demonstrate how useful indices can be for communicating environmental information to decision makers. We discuss how environmental indices have evolved over four stages: 1) simple; 2) compound multicriteria; 3) the impact matrix and 4) disparate stakeholder management. We provide examples of simple and compound indices that were used by policy decision makers. We then build a framework, called an Impact Matrix (IM), that comprehensively accounts for multiple indices but lets the user decide how to integrate them. The IM was shaped from the concept of a financial risk payoff matrix and applied to ecosystem risk. While the IM offers flexibility, it does not address stakeholder preferences about which index to use. Therefore, the last phase in our evolutionary ladder includes stakeholder indices to specifically address disparate stakeholder preferences. Finally, we assert that an environmental index has the potential to increase resource efficiency, since the number of decision making resources may be reduced, and hence improve upon resource productivity

Book chapter↗

USGS2022

Modeling protected species distributions and habitats to inform siting and management of pioneering ocean industries: A case study for Gulf of Mexico aquaculture

Marine Spatial Planning (MSP) provides a process that uses spatial data and models to evaluate environmental, social, economic, cultural, and management trade-offs when siting (i.e., strategically locating) ocean industries. Aquaculture is the fastest-growing food sector in the world. The United States (U.S.) has substantial opportunity for offshore aquaculture development given the size of its exclusive economic zone, habitat diversity, and variety of candidate species for cultivation. However, promising aquaculture areas overlap many protected species habitats. Aquaculture siting surveys, construction, operations, and decommissioning can alter protected species habitat and behavior. Additionally, aquaculture-associated vessel activity, underwater noise, and physical interactions between protected species and farms can increase the risk of injury and mortality. In 2020, the U.S. Gulf of Mexico was identified as one of the first regions to be evaluated for offshore aquaculture opportunities as directed by a Presidential Executive Order. We developed a transparent and repeatable method to identify aquaculture opportunity areas (AOAs) with the least conflict with protected species. First, we developed a generalized scoring approach for protected species that captures their vulnerability to adverse effects from anthropogenic activities using conservation status and demographic information. Next, we applied this approach to data layers for eight species listed under the Endangered Species Act, including five species of sea turtles, Rice’s whale, smalltooth sawfish, and giant manta ray. Next, we evaluated four methods for mathematically combining scores (i.e., Arithmetic mean, Geometric mean, Product, Lowest Scoring layer) to generate a combined protected species data layer. The Product approach provided the most logical ordering of, and the greatest contrast in, site suitability scores. Finally, we integrated the combined protected species data layer into a multi-criteria decision-making modeling framework for MSP. This process identified AOAs with reduced potential for protected species conflict. These modeling methods are transferable to other regions, to other sensitive or protected species, and for spatial planning for other ocean-uses.

PLoS ONE↗

USGS2019

Modelling development of riparian ranchlands using ecosystem services at the Aravaipa Watershed, SE Arizona

This paper describes how subdivision and development of rangelands within a remote and celebrated semiarid watershed near the US-Mexico border might affect multiple ecohydrological services provided, such as recharge of the aquifer, water and sediment yield, water quality, flow rates and downstream cultural and natural resources. Specifically, we apply an uncalibrated watershed model and land-change forecasting scenario to consider the potential effects of converting rangelands to housing developments and document potential changes in hydrological ecosystem services. A new method to incorporate weather data in watershed modelling is introduced. Results of introducing residential development in this fragile arid environment portray changes in the water budget, including increases in surface-water runoff, water yield, and total sediment loading. Our findings also predict slight reductions in lateral soil water, a component of the water budget that is increasingly becoming recognized as critical to maintaining water availability in arid regions. We discuss how the proposed development on shrub/scrub rangelands could threaten to sever imperative ecohydrological interactions and impact multiple ecosystem services. This research highlights rangeland management issues important for the protection of open-space, economic valuation of rangeland ecosystem services, conservation easements, and incentives to develop markets for these.

Arizona↗

USGS2011

Consequences of increasing bioenergy demand on wood and forests: An application of the Global Forest Products Model

The Global Forest Products Model (GFPM) was applied to project the consequences for the global forest sector of doubling the rate of growth of bioenergy demand relative to a base scenario, other drivers being maintained constant. The results showed that this would lead to the convergence of the price of fuelwood and industrial roundwood, raising the price of industrial roundwood by nearly 30% in 2030. The price of sawnwood and panels would be 15% higher. The price of paper would be 3% higher. Concurrently, the demand for all manufactured wood products would be lower in all countries, but the production would rise in countries with competitive advantage. The global value added in wood processing industries would be 1% lower in 2030. The forest stock would be 2% lower for the world and 4% lower for Asia. These effects varied substantially by country. ?? 2011 Department of Forest Economics, SLU Ume??, Sweden.

Journal of Forest Economics↗

USGS1963

Studies of fluid inclusions; [Part] 2, Freezing data and their interpretation

Aqueous and non-aqueous inclusions in 84 samples of various minerals from a wide range of geologic environments were studied with the freezing stage in order to gain an insight into the range of concentrations and compositions of fluid inclusions . Inclusions in most Mississippi Valley-type ore minerals contain highly concentrated saline solutions, showing freezing temperatures between -23.4° and -10.5° C; minerals from ore deposits of more typically hydrothermal affiliations mainly show temperatures of -9.4° to nearly 0° C; and inclusions in quartz crystals from sedimentary, metamorphic, and igneous rock environments show a wide range of freezing temperatures. Inclusions in pegmatite minerals in particular vary over a wide range, from the most concentrated solutions found in any inclusion (> 40% salts) to fairly dilute solutions (< 5% salts). Most inclusions in quartz from Swiss Alpine-type veins, and from Brazilian quartz veins and pegmatites, show freezing temperatures in the range -8.5° to - 2 .5°, and considerable free C02. Other geologic environments sampled include Colombian emerald, pegmatitic topaz and fluorite, the Triassic traprock zeolite assemblage, and sedimentary halite beds. Not all the phenomena exhibited by inclusions at low temperature are completely understood at present but several crystalline hydrate phases, such as NaCl-2H,0 and CO,-5%H,0 (structural formula 8C02-46H20), are shown to be stable in inclusions of appropriate composition even at temperatures above 0° C, and probably exist in the inclusions in natural rocks in polar regions. More significantly, the formation and recognition of such phases aid in establishing the gross composition of individual inclusions far too small for chemical analysis. The data obtained are useful in a variety of ways, such as: discriminating among gas, liquid, and supercritical fluid , and among liquid water, liquid oil, and liquid C02 in inclusions ; improving precision of the pressure corrections applied to inclusion filling temperature determinations; proving the general lack of leakage into or out of inclusions ; estimating the minimum pressure at the time of deposition of certain samples; verifying the lack of extraneous solid crystallization nuclei in the inclusions and hence their formation from exceedingly quiet, clean solutions; determining the total equivalent NaCl concentrations and some information concerning the composition of the fluids from which ores have formed; and determining changes in the composition of the fluids bathing a single crystal during its growth, and at certain times throughout its history.

Economic Geology↗

USGS2015

Invasive Species Science Branch: research and management tools for controlling invasive species

Invasive, nonnative species of plants, animals, and disease organisms adversely affect the ecosystems they enter. Like “biological wildfires,” they can quickly spread and affect nearly all terrestrial and aquatic ecosystems. Invasive species have become one of the greatest environmental challenges of the 21st century in economic, environmental, and human health costs, with an estimated effect in the United States of more than $120 billion per year. Managers of the Department of the Interior and other public and private lands often rank invasive species as their top resource management problem. The Invasive Species Science Branch of the Fort Collins Science Center provides research and technical assistance relating to management concerns for invasive species, including understanding how these species are introduced, identifying areas vulnerable to invasion, forecasting invasions, and developing control methods. To disseminate this information, branch scientists are developing platforms to share invasive species information with DOI cooperators, other agency partners, and the public. From these and other data, branch scientists are constructing models to understand and predict invasive species distributions for more effective management. The branch also has extensive herpetological and population biology expertise that is applied to harmful reptile invaders such as the Brown Treesnake on Guam and Burmese Python in Florida.

Fact Sheet↗

USGS2021

Terrestrial ecological risk analysis via dietary exposure at uranium mine sites in the Grand Canyon watershed (Arizona, USA)

The U.S. Department of the Interior recently included uranium (U) on a list of mineral commodities that are considered critical to economic and national security. The uses of U for commercial and residential energy production, defense applications, medical device technologies, and energy generation for space vehicles and satellites are known, but the environmental impacts of uranium extraction are not always well quantified. We conducted a screening-level ecological risk analysis based on exposure to mining-related elements via diets and incidental soil ingestion for terrestrial biota to provide context to chemical characterization and exposures at breccia pipe U mines in northern Arizona. Relative risks, calculated as hazard quotients (HQs), were generally low for all biological receptor models. Our models screened for risk to omnivores and insectivores (HQs>1) but not herbivores and carnivores. Uranium was not the driver of ecological risk; arsenic, cadmium, copper, and zinc were of concern for biota consuming ground-dwelling invertebrates. Invertebrate species composition should be considered when applying these models to other mining locations or future sampling at the breccia pipe mine sites. Dietary concentration thresholds (DCTs) were also calculated to understand food concentrations that may lead to ecological risk. The DCTs indicated that critical concentrations were not approached in our model scenarios, as evident in the very low HQs for most models. The DCTs may be used by natural resource and land managers as well as mine operators to screen or monitor for potential risk to terrestrial receptors as mine sites are developed and remediated in the future.

Arizona↗

USGS2011

Derived crop management data for the LandCarbon Project

The LandCarbon project is assessing potential carbon pools and greenhouse gas fluxes under various scenarios and land management regimes to provide information to support the formulation of policies governing climate change mitigation, adaptation and land management strategies. The project is unique in that spatially explicit maps of annual land cover and land-use change are created at the 250-meter pixel resolution. The project uses vast amounts of data as input to the models, including satellite, climate, land cover, soil, and land management data. Management data have been obtained from the U.S. Department of Agriculture (USDA) National Agricultural Statistics Service (NASS) and USDA Economic Research Service (ERS) that provides information regarding crop type, crop harvesting, manure, fertilizer, tillage, and cover crop (U.S. Department of Agriculture, 2011a, b, c). The LandCarbon team queried the USDA databases to pull historic crop-related management data relative to the needs of the project. The data obtained was in table form with the County or State Federal Information Processing Standard (FIPS) and the year as the primary and secondary keys. Future projections were generated for the A1B, A2, B1, and B2 Intergovernmental Panel on Climate Change (IPCC) Special Report on Emissions Scenarios (SRES) scenarios using the historic data values along with coefficients generated by the project. The PBL Netherlands Environmental Assessment Agency (PBL) Integrated Model to Assess the Global Environment (IMAGE) modeling framework (Integrated Model to Assess the Global Environment, 2006) was used to develop coefficients for each IPCC SRES scenario, which were applied to the historic management data to produce future land management practice projections. The LandCarbon project developed algorithms for deriving gridded data, using these tabular management data products as input. The derived gridded crop type, crop harvesting, manure, fertilizer, tillage, and cover crop products are used as input to the LandCarbon models to represent the historic and the future scenario management data. The overall algorithm to generate each of the gridded management products is based on the land cover and the derived crop type. For each year in the land cover dataset, the algorithm loops through each 250-meter pixel in the ecoregion. If the current pixel in the land cover dataset is an agriculture pixel, then the crop type is determined. Once the crop type is derived, then the crop harvest, manure, fertilizer, tillage, and cover crop values are derived independently for that crop type. The following is the overall algorithm used for the set of derived grids. The specific algorithm to generate each management dataset is discussed in the respective section for that dataset, along with special data handling and a description of the output product.

Open-File Report↗

USGS2025

Co-location of sheep grazing and solar energy production yields agrotechnological synergies

CONTEXT Agrivoltaics—the co-location of solar energy and agricultural production—may reduce land-use competition and boost revenues for landowners. Sheep grazing in solar facilities (i.e., solar grazing/agrivoltaic grazing systems) is increasingly common in agricultural areas. Solar grazing can provide land access to flock owners and support agricultural viability via payments for vegetation management. However, there is a need for more data on how co-location of sheep grazing and solar energy production affects flock health, stocking rates, and feedback loops for maintenance of vegetation in solar facilities across regions. OBJECTIVE Our objective was to better understand synergies and tradeoffs associated with agrivoltaic grazing systems by investigating applied grazing management questions as well as questions regarding agrotechnological co-benefits related to simultaneous flock health and vegetation management in solar facilities. METHODS We tested effects of sheep stocking rates (0 to 10 sheep per ha–1), site preparation (fallow vs. legume seed-mix planting), and microclimate (panel-shaded areas vs. panel interspaces) on herbage yield and nutritional quality, flock health and condition, and a vegetation management success index. We collected these data across two grazing seasons in an operational, 21.85-ha photovoltaic solar facility (18 MW) established on a previous old field in New York State, USA. RESULTS AND CONCLUSIONS Shade from solar panels negatively affected herbage yield. We detected no significant differences in herbage yield or vegetation management outcomes between fallow and planted legume plots, suggesting that regrowth from native seed banks in solar facilities on previous old fields may be an economical alternative to seeding for sheep forage relative. Sheep stocking rates affected flock health and condition; we identified an optimal stocking rate of 8 sheep per ha–1 for achieving sufficient herbage yield and quality, maintaining flock health, and preventing vegetation overgrowth from shading solar panels at our study site. Solar grazing can yield an agrotechnological synergy supporting healthy forage, healthy sheep, and vegetation management in community-scale (i.e., <25 MW) solar facilities without mowing. In a well-managed solar grazing system, high herbage yield and quality promote high flock health and condition, and the healthy flock suppresses vegetation enough to prevent panel shading. SIGNIFICANCE Our study highlights the potential for sheep grazing in solar facilities to simultaneously benefit sheep and solar energy production systems. Solar grazing can present a “win-win” scenario for solar developers and sheep producers in the northeastern U.S.

New York↗

USGS2007

United States‐Mexican border watershed assessment: Modeling nonpoint source pollution in Ambos Nogales

Ecological considerations need to be interwoven with economic policy and planning along the United States‐Mexican border. Non‐point source pollution can have significant implications for the availability of potable water and the continued health of borderland ecosystems in arid lands. However, environmental assessments in this region present a host of unique issues and problems. A common obstacle to the solution of these problems is the integration of data with different resolutions, naming conventions, and quality to create a consistent database across the binational study area. This report presents a simple modeling approach to predict nonpoint source pollution that can be used for border watersheds. The modeling approach links a hillslopescale erosion‐prediction model and a spatially derived sediment‐delivery model within a geographic information system to estimate erosion, sediment yield, and sediment deposition across the Ambos Nogales watershed in Sonora, Mexico, and Arizona. This paper discusses the procedures used for creating a watershed database to apply the models and presents an example of the modeling approach applied to a conservation‐planning problem.

Arizona, Sonoma↗

USGS2013

The SAFRR tsunami scenario-physical damage in California: Chapter E in The SAFRR (Science Application for Risk Reduction) Tsunami Scenario

his chapter attempts to depict a single realistic outcome of the SAFRR (Science Application for Risk Reduction) tsunami scenario in terms of physical damage to and recovery of various aspects of the built environment in California. As described elsewhere in this report, the tsunami is generated by a hypothetical magnitude 9.1 earthquake seaward of the Alaska Peninsula on the Semidi Sector of the Alaska–Aleutian Subduction Zone, 495 miles southwest of Anchorage, at 11:50 a.m. Pacific Daylight Time (PDT) on Thursday March 27, 2014, and arriving at the California coast between 4:00 and 5:40 p.m. (depending on location) the same day. Although other tsunamis could have locally greater impact, this source represents a substantial threat to the state as a whole. One purpose of this chapter is to help operators and users of coastal assets throughout California to develop emergency plans to respond to a real tsunami. Another is to identify ways that operators or owners of these assets can think through options for reducing damage before a future tsunami. A third is to inform the economic analyses for the SAFRR tsunami scenario. And a fourth is to identify research needs to better understand the possible consequences of a tsunami on these assets. The asset classes considered here include the following: Piers, cargo, buildings, and other assets at the Ports of Los Angeles and Long Beach Large vessels in the Ports of Los Angeles and Long Beach Marinas and small craft Coastal buildings Roads and roadway bridges Rail, railway bridges, and rolling stock Agriculture Fire following tsunami Each asset class is examined in a subsection of this chapter. In each subsection, we generally attempt to offer a historical review of damage. We characterize and quantify the assets exposed to loss and describe the modes of damage that have been observed in past tsunamis or are otherwise deemed likely to occur in the SAFRR tsunami scenario. Where practical, we offer a mathematical model of the damageability of assets exposed to loss. Then, applying the damageability model and the velocity, wave amplitude, and inundation models discussed in other SAFRR chapters we offer a single realistic depiction of damage. Other outcomes are of course possible for this hypothetical event. Where practical we estimate repair costs and estimate the duration required to restore the assets to their pre-tsunami condition. We identify opportunities to enhance the resiliency of the assets, either through making them less vulnerable to damage or able to recover more quickly in spite of the damage. Finally, we identify uncertainties in the modeling where research would improve our understanding of the underlying mechanisms of damage and loss or otherwise improve our ability to estimate the future impacts of tsunamis and inform risk-management decisions for tsunamis. However, it is certain that the kinds of damages discussed here have occurred in past tsunamis, even in developed nations, and in a sufficiently large event, will occur in California. Our uncertainties can operate in either direction, either leading to an overestimate of damage or an underestimate. Therefore, losses in an actual future tsunami could be greater than depicted here. Furthermore this evaluation is not intended to be an exhaustive depiction of what could happen in this or similar tsunamis. Other impacts could occur that are not presented here.

California↗

USGS1999

Examining risk in mineral exploration

Successful mineral exploration strategy requires identification of some of the risk sources and considering them in the decision-making process so that controllable risk can be reduced. Risk is defined as chance of failure or loss. Exploration is an economic activity involving risk and uncertainty, so risk also must be defined in an economic context. Risk reduction can be addressed in three fundamental ways: (1) increasing the number of examinations; (2) increasing success probabilities; and (3) changing success probabilities per test by learning. These provide the framework for examining exploration risk. First, the number of prospects examined is increased, such as by joint venturing, thereby reducing chance of gambler's ruin . Second, success probability is increased by exploring for deposit types more likely to be economic, such as those with a high proportion of world-class deposits. For example, in looking for 100+ ton (>3 million oz) Au deposits, porphyry Cu-Au, or epithermal quartz alunite Au types require examining fewer deposits than Comstock epithermal vein and most other deposit types. For porphyry copper exploration, a strong positive relationship between area of sulfide minerals and deposits' contained Cu can be used to reduce exploration risk by only examining large sulfide systems. In some situations, success probabilities can be increased by examining certain geologic environments. Only 8% of kuroko massive sulfide deposits are world class, but success chances can be increased to about 15% by looking in settings containing sediments and rhyolitic rocks. It is possible to reduce risk of loss during mining by sequentially developing and expanding a mine—thus reducing capital exposed at early stages and reducing present value of risked capital. Because this strategy is easier to apply in some deposit types than in others, the strategy can affect deposit types sought. Third, risk is reduced by using prior information and by changing the independence of trials assumption, that is, by learning. Bayes' formula is used to change the probability of existence of the deposit sought on the basis of successive exploration stages. Perhaps the most important way to reduce exploration risk is to employ personnel with the appropriate experience and yet who are learning.

Natural Resources Research↗

USGS1951

Geochemical techniques as applied in recent investigations in the Tintic District, Utah

Field techniques for the rapid extraction and estimation of copper, lead, and zinc from altered rock are described, together with their application in the Tintic district , Utah . Either sulfuric acid or an acetic acid-ammonium acetate reagent is feasible as an extractant; but of these two, sulfuric acid is preferred. Data obtained by partial extraction methods show that zinc and lead are concentrated in altered extrusive rocks 350 to 500 feet above a horizontal, pipelike ore body in limestone, where the extrusive rocks are cut by a fracture zone related to a strong premineral cross fault. Such concentrations are absent in altered but unbrecciated igneous rocks above the continuation of the same ore body in an unfaulted area.

Utah↗

USGS2023

Stochastic simulation of earthquake ground motions for the seismic assessment of monumental masonry structures: Source-based vs site-based approaches

Earthquakes are among the most destructive natural disasters and have resulted in a massive number of fatalities and economic losses all over the world. Simulated ground motion records are valuable, particularly for regions lacking seismic stations or with a limited history of large-magnitude earthquakes. Notably, a significant percentage of monumental masonry buildings are located in regions with limited access to real records; hence, simulated records play a paramount role in their seismic protection. However, few studies have investigated the structural response of heritage buildings via response history analyses to assess the performance of simulated earthquakes against real ones. To accomplish this, this study simulates the recorded time-series of the 9th of July 1998 Faial earthquake in the Azores (M w = 6.2) at four available stations, using two different simulation approaches, that is, a source-based stochastic finite-fault method and a site-based broadband stochastic method. First, two masonry facades with sidewalls characterized by different slenderness levels are adopted to conduct this research. Moreover, the proposed approach is also applied to an existing monumental structure, that is, São Francisco Church, located at Horta, which was affected by damage during the Faial earthquake. Results demonstrate that both simulation approaches provide similar results in terms of structural response prediction. The proposed framework also demonstrates that a small mismatch in terms of predicted damage patterns can result in a significant relative error in terms of displacement predictions.

Earthquake Engineering and Structural Dynamics↗