SEARCH · USGS Science

Results for “Water Well Journal”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16Linked to original sources

USGS1982

A new instrument for sampling flocculent material at the water/sediment interface

We have designed an instrument to collect fine-grained and flocculent material from the water/sediment interface for chemical and mineralogical analysis. The sampler can be used from a manned research submersible or by a diver in shallow water. In areas of active deposition, the material collected represents the most recently deposited sediment. This material is of interest for determining the concentration of anthropogenic contaminants at the sea floor and may be a much more sensitive indicator of early contamination than are bulk samples collected by means of conventional grab samplers or corers. The instrument also may be well suited for sampling freshly flocculated or precipitated material from the sea floor, for example in estuaries or around thermal vents on mid ocean ridges.

Journal of Sedimentary Research↗

USGS1984

Ecological distribution and crude density of breeding birds on prairie wetlands

Breeding populations of 28 species of wetland-dwelling birds other than waterfowl (Anatidae) were censused on 1,321 wetlands lying within the prairie pothole region of North Dakota. Ecological distribution and two crude measures of relative density were calculated for the 22 commonest species using eight wetland classes. Semipermanent wetlands supported nearly two-thirds of the population and were used by all 22 species, whereas seasonal wetlands contained about one-third of the population and were used by 20 species Semipermanent, fen, and temporary wetlands contained highest bird densities on the basis of wetland area; on the basis of wetland unit, densities were highest on semipermanent, permanent, alkali, and fen wetlands. The highest ranking of semipermanent wetlands by all three measures of use was probably because these wetlands, as well as being relatively numerous and large, were vegetatively diverse. The fairly large proportion of the bird population supported by seasonal wetlands was a result of wetland abundance and moderate vegetative diversity. Increased vegetative diversity results from the development of characteristic zones of hydrophytes at sites where water persists longer during the growing season. Frequent cultivation of prairie wetlands results in the replacement of tall, robust perennials by bare soil or stands of short, weak-stemmed annuals that likely are unattractive to nesting birds.

North Dakota↗

USGS2012

Heterogeneous redox conditions, arsenic mobility, and groundwater flow in a fractured-rock aquifer near a waste repository site in New Hampshire, USA

Anthropogenic sources of carbon from landfill or waste leachate can promote reductive dissolution of in situ arsenic (As) and enhance the mobility of As in groundwater. Groundwater from residential-supply wells in a fractured crystalline-rock aquifer adjacent to a Superfund site in Raymond, New Hampshire, USA, showed evidence of locally enhanced As mobilization in relatively reducing (mixed oxic-anoxic to anoxic) conditions as determined by redox classification and other lines of evidence. Redox classification was determined from geochemical indicators based on threshold concentrations of dissolved oxygen (DO), nitrate (NO 3- ), iron (Fe 2+ ), manganese (Mn 2+ ), and sulfate (SO 4 2- ). Redox conditions were evaluated also based on methane (CH 4 ), excess nitrogen gas (N 2 ) from denitrification, the oxidation state of dissolved As speciation (As(III) and As(V)), and several stable isotope ratios. Samples from the residential-supply wells primarily exhibit mixed redox conditions, as most have long open boreholes (typically 50–100 m) that receive water from multiple discrete fractures with contrasting groundwater chemistry and redox conditions. The methods employed in this study can be used at other sites to gauge redox conditions and the potential for As mobilization in complex fractured crystalline-rock aquifers where multiple lines of evidence are likely needed to understand As occurrence, mobility, and transport.

New Hampshire↗

USGS2024

Reexamining the Honolulu Volcanics: Hawai‘i's classic case of rejuvenation volcanism

Rejuvenated volcanism is a worldwide phenomenon occurring on many oceanic islands in all of the major ocean basins. This plume-related volcanism follows the main edifice-building stage after a hiatus of variable duration (e.g. 0.6–2 Myrs in Hawai'i). The Honolulu Volcanics (HV), the classic case of rejuvenated volcanism, involved monogenetic eruptions from at least 48 vent areas. Previous studies inferred these vents were aligned along 3 to 11 rifts oriented orthogonal to the propagation direction of the Hawaiian plume. HV basalts are known for having high MgO contents (greater than 10 wt %) and upper mantle xenoliths. Thus, HV magmas are assumed to be relatively primitive and to have ascended rapidly (less than 1 day) through the crust. However, new analyses of olivine cores in basalts from 24 HV vents are mostly too low in forsterite content (74–86 mol %) to be in equilibrium with mantle melts. Olivine and clinopyroxene in HV basalts commonly show reverse zoning indicating magma mixing prior to eruption. These results are inconsistent with the rapid ascent of HV magmas directly from their mantle source. Many of the HV magmas underwent storage (probably in the lower crust or uppermost mantle), crystal fractionation and magma mixing prior to eruption. New 40 Ar/ 39 Ar dates were determined for 11 HV lavas to evaluate their eruptive history. These ages, 80 to 685 ka, combined with our previous and other 40 Ar/ 39 Ar ages for HV lavas reveal long gaps (greater than 50 kyr) between some eruptions. Our comprehensive, whole-rock major and trace element database (63 XRF analyses, 57 ICPMS analyses) of basalts from 37 vents show remarkable compositional diversity with no obvious spatial pattern or temporal trends. The two most recent eruptive sequences have the greatest diversity (basanite and melilitite compositions). HV basanites show systematic trace element trends that may reflect mixing of multiple source components. The nephelinites and melilitites require a complex source history that may have involved residual accessory minerals during mantle melting and a metasomatic component that was not carbonatitic. The new ages and geochemical data show eruptions along most of the previously proposed rift systems were unrelated (except for the Koko Rift). Therefore, geodynamic models that relate HV volcanism to these rift systems are invalid. Lava volumes for two HV eruptions were estimated at 0.11 and 0.23 km 3 using surface mapping and water well data. Similar size, recent monogenetic eruptions in Auckland, New Zealand, were inferred to have lasted several months. Thus, if another HV eruption were to occur, which is possible given the long hiatus between eruptions, it would be extremely disruptive for the nearly 1 million residents of Honolulu. None of the existing geodynamic models fully explain the age duration, volumes and the locations of Hawai'i's rejuvenated volcanism. Thus, the cause of this secondary volcanism remains enigmatic.

Hawaii↗

USGS1997

Detecting changes in the spatial distribution of nitrate contamination in ground water

Many studies of ground water pollution in general and nitrate contamination in particular have often relied on a one-time investigation, tracking of individual wells, or aggregate summaries. Studies of changes in spatial distribution of contaminants over time are lacking. This paper presents a method to compare spatial distributions for possible changes over time. The large-scale spatial distribution at a given time can be considered as a surface over the area (a trend surface). The changes in spatial distribution from period to period can be revealed by the differences in the shape and/or height of surfaces. If such a surface is described by a polynomial function, changes in surfaces can be detected by testing statistically for differences in their corresponding polynomial functions. This method was applied to nitrate concentration in a population of wells in an agricultural drainage basin in Iowa, sampled in three different years. For the period of 1981-1992, the large-scale spatial distribution of nitrate concentration did not show significant change in the shape of spatial surfaces; while the magnitude of nitrate concentration in the basin, or height of the computed surfaces showed significant fluctuations. The change in magnitude of nitrate concentration is closely related to climatic variations, especially in precipitation. The lack of change in the shape of spatial surfaces means that either the influence of land use/nitrogen management was overshadowed by climatic influence, or the changes in land use/management occurred in a random fashion.

Journal of the American Water Resources Associatio↗

USGS2024

Vortex trapping of suspended sand grains over ripples

Coastal hydrodynamics and morphodynamics integrate the effects of small-scale fluid-sediment interactions; yet, these small-scale processes are not well understood. To investigate sediment trapping by turbulent coherent structures or vortices, the transport of coarse sand over ripples was analyzed in a small-oscillatory flow tunnel with phase-separated Particle Image and Tracking Velocimetry. Results from one of the first direct measurements of vortex-trapped sand grains under oscillatory flows are presented. The vortices mobilized sand grains along the ripple slopes just prior to flow reversal and transported the suspended sediment grains. During several flow cycles, some sand grains were temporarily trapped in the vortex, prescribing semi-circular trajectories off-center from the vortex core in quadrants of the vortex that were closest to the ripple slope, as illustrated by Nielsen (1992, https://doi.org/10.1142/1269 ). Comparisons of the horizontal sediment grain velocity with the horizontal fluid velocity yielded a linear relationship with a slope of 0.87. The vertical grain velocities also varied linearly with the vertical fluid velocity with a slope of approximately 1 and an offset of −0.08 m s −1 . The offset is close to the still water settling velocity for coarse sand grains, as hypothesized during vortex trapping. Additionally, estimates of the off-center distance, between the centers of the semi-circular sediment paths and vortex cores, compared well with the ratio of the settling velocity to the radian frequency of the vortex yielding a linear regression slope of 0.99. Improved understanding of vortex trapping effects on sediment dynamics may decrease uncertainty in model predictions of large-scale coastal hydrodynamics and sediment transport.

Journal of Geophysical Research: Earth Surface↗

USGS2016

Emerging tools for continuous nutrient monitoring networks: Sensors advancing science and water resources protection

Sensors and enabling technologies are becoming increasingly important tools for water quality monitoring and associated water resource management decisions. In particular, nutrient sensors are of interest because of the well-known adverse effects of nutrient enrichment on coastal hypoxia, harmful algal blooms, and impacts to human health. Accurate and timely information on nutrient concentrations and loads is integral to strategies designed to minimize risk to humans and manage the underlying drivers of water quality impairment. Using nitrate sensors as an example, we highlight the types of applications in freshwater and coastal environments that are likely to benefit from continuous, real-time nutrient data. The concurrent emergence of new tools to integrate, manage and share large data sets is critical to the successful use of nutrient sensors and has made it possible for the field of continuous nutrient monitoring to rapidly move forward. We highlight several near-term opportunities for Federal agencies, as well as the broader scientific and management community, that will help accelerate sensor development, build and leverage sites within a national network, and develop open data standards and data management protocols that are key to realizing the benefits of a large-scale, integrated monitoring network. Investing in these opportunities will provide new information to guide management and policies designed to protect and restore our nation’s water resources.

Journal of the American Water Resources Associatio↗

USGS2013

Updated methodology for nuclear magnetic resonance characterization of shales

Unconventional petroleum resources, particularly in shales, are expected to play an increasingly important role in the world’s energy portfolio in the coming years. Nuclear magnetic resonance (NMR), particularly at low-field, provides important information in the evaluation of shale resources. Most of the low-field NMR analyses performed on shale samples rely heavily on standard T 1 and T 2 measurements. We present a new approach using solid echoes in the measurement of T 1 and T 1 –T 2 correlations that addresses some of the challenges encountered when making NMR measurements on shale samples compared to conventional reservoir rocks. Combining these techniques with standard T 1 and T 2 measurements provides a more complete assessment of the hydrogen-bearing constituents (e.g., bitumen, kerogen, clay-bound water) in shale samples. These methods are applied to immature and pyrolyzed oil shale samples to examine the solid and highly viscous organic phases present during the petroleum generation process. The solid echo measurements produce additional signal in the oil shale samples compared to the standard methodologies, indicating the presence of components undergoing homonuclear dipolar coupling. The results presented here include the first low-field NMR measurements performed on kerogen as well as detailed NMR analysis of highly viscous thermally generated bitumen present in pyrolyzed oil shale.

Journal of Magnetic Resonance↗

USGS2019

A fuzzy logic approach for estimating recovery factors of miscible CO2-EOR projects in the United States

"Recovery factor (RF) is one of the most fundamental parameters that define engineering and economical success of any operational phase in oil and gas production. The effectiveness of the operation, e.g. CO2-EOR (enhanced oil recovery with carbon dioxide injection), is usually defined by multiplying the resultant recovery factor by the original oil in place. Moreover, investment decisions for such engineering projects are also performed based on predicted recovery factors. Despite its importance, though, it is not easy to predict recovery factors as they are affected by many factors including the type of the recovery process, reservoir type, fluid properties, reservoir heterogeneity, depth, thickness, to name a few. The usual method of estimating recovery factors is laboratory experiments or numerical modeling, each of which has their own limitations due to data requirements, boundary conditions and scale effects. In this work, a fuzzy inference system approach has been adopted to predict miscible CO2-EOR recovery factors of the major field applications in the United States with the premise that it can be used as a guidance tool for making decisions based on different inputs. The fuzzy system was build using a Mamdani-type fuzzy logic inference engine, and by using reservoir data compiled from different sources as inputs and recovery factors gathered from a literature survey. Due to the limited number of field cases that could be used for this purpose, 24 sets of applications were included in the study. Selected input variables were water saturation after waterflood (Sorw), well spacing, porosity, permeability, depth, net pay thickness, initial pressure, API gravity of oil, hydrocarbon pore volume CO2 injected, and reservoir lithology. The type of membership functions were decided based on the system’s predictive performance. The model showed reasonable predictive capability for the field observations of recovery factor despite the complexity of this parameter. In addition, since the fuzzy solution was multi-dimensional due to multiple inputs, system behavior was used to demonstrate response of miscible CO2-EOR recovery factor to different inputs. "

Journal of Petroleum Science and Engineering↗

USGS2024

Will there be water? Climate change, housing needs, and future water demand in California

Climate change in California is expected to alter future water availability, impacting water supplies needed to support future housing growth and agriculture demand. In groundwater-dependent regions like California's Central Coast, new land-use related water demand and decreasing recharge is already stressing depleted groundwater basins. We developed a spatially explicit state-and-transition simulation model that integrates climate, land-use change, water demand, and groundwater gain-loss to examine the impact of future climate and land use change on groundwater balance and water demand in five counties along the Central Coast from 2010 to 2060. The model incorporated downscaled groundwater recharge projections based on a Warm/Wet and a Hot/Dry climate future from a spatially explicit hydrological process-based model. Two urbanization projections from a parcel-based, regional urban growth model representing 1) recent historical and 2) state-mandated housing growth projections were used as alternative spatial targets for future urban growth. Agricultural projections were based on recent historical trends from remote sensing data. Annual projected changes in groundwater balance were calculated as the difference between land-use related water demand, based on historical estimates, and climate-driven recharge plus agriculture return flows. Results indicate that future changes in climate-driven groundwater recharge, coupled with cumulative increases in agricultural water demand, result in overall declines in future groundwater balance, with a Hot/Dry future resulting in cumulative groundwater decline in all but Santa Cruz County. Cumulative declines by 2060 are especially prominent in San Luis Obispo (−2.9 to −5.1 Bm 3 ) and Monterey counties (−6.5 to −8.7 Bm 3 ), despite limited changes in agricultural water demand over the model period. These two counties show declining groundwater reserves in a Warm/Wet future as well, while San Benito and Santa Barbara County barely reach equilibrium. These results suggest future groundwater supplies may not be able to keep pace with regional demand and declining climate-driven recharge, resulting in a potential reduction in water security in the region. However, our county-scale projections showed new housing and associated water demand does not conflict with California's groundwater sustainability goals. Rather, future climate coupled with increasing agricultural groundwater demand may reduce water security in some counties, potentially limiting available groundwater supplies for new housing.

California↗

USGS2006

Determination of bromine, chlorine and iodine in environmental aqueous samples by epithermal neutron activation analysis and Compton suppression

Halides, particularly Br- and Cl-, have been used as indicators of potential sources of Na+ and Cl- in surface water and groundwater with limited success. Contamination of groundwater and surface water by Na+ and Cl- is a common occurrence in growing urban areas and adversely affects municipal and private water supplies in Illinois and other states, as well as vegetation in environmentally sensitive areas. Neutron activation analysis (NAA) can be effectively used to determine these halogens, but often the elevated concentrations of sodium and chlorine in water samples can give rise to very high detection limits for bromine and iodine due to elevated backgrounds from the activation process. We present a detailed analytical scheme to determine Cl, Br and I in aqueous samples with widely varying Na and Cl concentrations using epithermal NAA in conjunction with Compton suppression. ?? 2006 Akade??miai Kiado??.

Journal of Radioanalytical and Nuclear Chemistry↗

USGS2015

Changes in depth occupied by Great Lakes lake whitefish populations and the influence of survey design

Understanding fish habitat use is important in determining conditions that ultimately affect fish energetics, growth and reproduction. Great Lakes lake whitefish ( Coregonus clupeaformis ) have demonstrated dramatic changes in growth and life history traits since the appearance of dreissenid mussels in the Great Lakes, but the role of habitat occupancy in driving these changes is poorly understood. To better understand temporal changes in lake whitefish depth of capture ( D w ), we compiled a database of fishery-independent surveys representing multiple populations across all five Laurentian Great Lakes. By demonstrating the importance of survey design in estimating D w , we describe a novel method for detecting survey-based bias in D w and removing potentially biased data. Using unbiased D w estimates, we show clear differences in the pattern and timing of changes in lake whitefish D w between our reference sites (Lake Superior) and those that have experienced significant benthic food web changes (lakes Michigan, Huron, Erie and Ontario). Lake whitefish D w in Lake Superior tended to gradually shift to shallower waters, but changed rapidly in other locations coincident with dreissenid establishment and declines in Diporeia densities. Almost all lake whitefish populations that were exposed to dreissenids demonstrated deeper D w following benthic food web change, though a subset of these populations subsequently shifted to more shallow depths. In some cases in lakes Huron and Ontario, shifts towards more shallow D w are occurring well after documented Diporeia collapse, suggesting the role of other drivers such as habitat availability or reliance on alternative prey sources.

Lake Erie, Lake Huron, Lake Michigan, Lake Ontario↗

USGS2012

Geochemistry of thermal waters in Long Valley, Mono County, California

Thermal springs and wells in Long Valley, California, issue sodium bicarbonate‐chloride waters containing 1000–1420 mg/l of dissolved solids. Thermal waters of sodium bicarbonate‐chloride composition are usually associated with hot‐water reservoirs. Chloride concentrations and stable isotope data indicate that the thermal waters have had varied histories. All of the thermal springs issue a mixture of fluid from the thermal reservoir and less saline, cooler water from one or more shallow aquifers. The composition of springs in Hot Creek Gorge may have been further altered by minor subsurface boiling. Thermal springs between Hot Creek and Lake Crowley issue mixtures of fresh and thermal waters which have lost heat by conductive cooling and changed composition by reaction with rock in the shallow aquifer. The silica content of water from Magma Richie 5 and mixing calculations based on the concentrations of silica in thermal waters collected from springs in Hot Creek Gorge and along Little Hot Creek indicate a temperature of at least 200°C in the thermal reservoir. The sodium‐potassium‐calcium geothermometer yields a reservoir temperature estimate near 200°C for most of the thermal springs. If geothermal energy is developed in Long Valley, the high concentrations of arsenic (up to 2.2 mg/l), boron (up to 15 mg/l), and total dissolved solids in the thermal fluids will make it necessary to isolate the effluent of production wells from the freshwater system.

California↗

USGS1985

Hydraulic gradient control for groundwater contaminant removal

The Rocky Mountain Arsenal near Denver, Colorado, U.S.A., is used as a realistic setting for a hypothetical test of a procedure that plans the hydraulic stabilization and removal of a groundwater contaminant plume. A two-stage planning procedure successfully selects the best wells and their optimal pumping/recharge schedules to contain the plume while a well or system of wells within the plume removes the contaminated water. In stage I, a combined groundwater flow and solute transport model is used to simulate contaminant removal under an assumed velocity field. The result is the approximated plume boundary location as a function of time. In stage II, a linear program, which includes a groundwater flow model as part of the set of constraints, determines the optimal well selection and their optimal pumping/recharge schedules by minimizing total pumping and recharge. The simulation—management model eliminates wells far from the plume perimeter and activates wells near the perimeter as the plume decreases in size. This successfully stablizes the hydraulic gradient during aquifer cleanup.

Colorado↗

USGS2020

Lava–water interaction and hydrothermal activity within the 2014–2015 Holuhraun Lava Flow Field, Iceland

Lava that erupted during the 2014–2015 Holuhraun eruption in Iceland flowed into a proglacial river system, resulting in aqueous cooling of the lava and an ephemeral hydrothermal system. We carried out a monitoring study of this system from 2015 to 2018 to document the cooling of the lava over this time, using thermocouple measurements and data-logging sensors. The heat loss rate from advection through this hydrothermal system in August 2015 was ~5.5 × 10 8 W; since eruption, aqueous cooling likely accounted for ~1% of the total heat loss from the lava. This estimate excludes steam losses from fumaroles as well as any groundwater that was not released to the surface, and thus is a lower bound. Near the terminus of the flow, advection of heat by flowing water may have locally accounted for tens of percent of the total cooling of that part of the flow. Our data quantify the importance of water cooling for this lava flow and can be compared with models to better understand lava–water interactions more generally. We also provide detailed methods for simple, low-cost monitoring of similar instances in the future.

Holuhraun Lava Flow Field↗

USGS2008

Mapping the information landscape: Discerning peaks and valleys for ecological monitoring

We investigate previously unreported phenomena that have a potentially significant impact on the design of surveillance monitoring programs for ecological systems. Ecological monitoring practitioners have long recognized that different species are differentially informative of a system's dynamics, as codified in the well-known concepts of indicator or keystone species. Using a novel combination of analysis techniques from nonlinear dynamics, we describe marked variation among spatial sites in information content with respect to system dynamics in the entire region. We first observed these phenomena in a spatially extended predator-prey model, but we observed strikingly similar features in verified water-level data from a NOAA/NOS Great Lakes monitoring program. We suggest that these features may be widespread and the design of surveillance monitoring programs should reflect knowledge of their existence.

Journal of Biological Physics↗

USGS1998

Developmental geology of coalbed methane from shallow to deep in Rocky Mountain basins and in Cook Inlet-Matanuska Basin, Alaska, USA and Canada

The Rocky Mountain basins of western North America contain vast deposits of coal of Cretaceous through early Tertiary age. Coalbed methane is produced in Rocky Mountain basins at depths ranging from 45 m (150 ft) to 1981 m (6500 ft) from coal of lignite to low-volatile bituminous rank. Although some production has been established in almost all Rocky Mountain basins, commercial production occurs in only a few. despite more than two decades of exploration for coalbed methane in the Rocky Mountain region, it is still difficult to predict production characteristics of coalbed methane wells prior to drilling. Commonly cited problems include low permeabilities, high water production, and coals that are significantly undersaturated with respect to methane. Sources of coalbed gases can be early biogenic, formed during the early stages of coalification, thermogenic, formed during the main stages of coalification, or late stage biogenic, formed as a result of the reintroduction of methane-gnerating bacteria by groundwater after uplift and erosion. Examples of all three types of coalbed gases, and combinations of more than one type, can be found in the Rocky Mountain region. Coals in the Rocky Mountain region achieved their present ranks largely as a result of burial beneath sediments that accumulated during the Laramide orogeny (Late Cretaceous through the end of the eocene) or shortly after. Thermal events since the end of the orogeny have also locally elevated coal ranks. Coal beds in the upper part of high-volatile A bituminous rank or greater commonly occur within much more extensive basin-centered gas deposits which cover large areas of the deeper parts of most Rocky Mountain basins. Within these basin-centered deposits all lithologies, including coals, sandstones, and shales, are gas saturated, and very little water is produced. The interbedded coals and carbonaceous shales are probably the source of much of this gas. Basin-centered gas deposits become overpressured from hydrocarbon generation as they form, and this overpressuring is probably responsible for driving out most of the water. Sandstone permeabilities are low, in part because of diagenesis caused by highly reactive water given off during the early stages of coalification. Coals within these basin-centered deposits commonly have high gas contents and produce little water, but they generally occur at depths greater than 5000 ft and have low permeabilities. Significant uplift and removal of overburden has occurred throughout the Rocky Mountain region since the end of the Eocene, and much of this erosion occurred after regional uplift began about 10 Ma. The removal of overburden generally causes methane saturation levels in coals to decrease, and thus a significant drop in pressure is required to initiate methane production. The most successful coalbed methane production in the Rocky Mountain region occurs in areas where gas contents were increased by post-Eocene thermal events and/or the generation of late-stage biogenic gas. Methane-generating bacteria were apparently reintroduced into the coals in some areas after uplift and erosion, and subsequent changes in pressure and temperature, allowed surface waters to rewater the coals. Groundwater may also help open up cleat systems making coals more permeable to methane. If water production is excessive, however, the economics of producing methane are impacted by the cost of water disposal.The Rocky Mountain basins of western North America contain vast deposits of coal of Cretaceous through early Tertiary age. Coalbed methane is produced in Rocky Mountain basins at depths ranging from 45 to 1981 m from coal of lignite to low volatile bituminous rank. Despite more than two decades of exploration for coalbed methane in Rocky Mountain region, it is still difficult to predict production characteristics of coalbed methane wells prior to drilling. Sources of coalbed gases can be early biogenic, formed during the main stages of coa

International Journal of Coal Geology↗

USGS2023

Satellite remote sensing of river discharge: A framework for assessing the accuracy of discharge estimates made from satellite remote sensing observations

This research presents an evaluation of the accuracy and uncertainty of estimates of river discharge made using satellite observed data sources as input to a modified form of Manning’s equation. Conventional U.S. Geological Survey (USGS) streamflow gaging station data and in-situ measurements of width, depth, height, slope, discharge, and velocity from 30 USGS gage sites were used as ground-truth to assess accuracy. This study explores accuracy in relation to the amount of ground truth information available, the number of calibration points available, and the accuracy of the input data. This research indicates that remotely sensed discharge estimates associated with the modified Manning equation may be expected to have an uncertainty in range of 10% overall given a sufficient number of calibration points. The uncertainty associated with the modified Manning algorithm increased markedly for depths <3 meters (m) and for discharges <1000 cubic meters per second (m 3 / s) for many rivers after calibration. Rivers that exhibit (1) a wide range of flow conditions, (2) a significant number of dams in the watershed and along the channel, and (3) a high baseflow index are more likely to have relatively large errors overall and particularly at the low end of the streamflow range. Uncertainty in remotely sensed measurements of water-surface elevation (WSE) and width in the expected range (WSE, + / − 10 cm; Width, + / − 15 m) introduces uncertainty in the discharge estimates on the order of 10% and is greatest at the low end of discharge as rivers get shallower and narrower. As WSE and width measurement uncertainty increases, discharge uncertainty increases accordingly. In general, the observation errors are greater than the errors associated with the algorithm for a well-calibrated model (e.g., 20 calibration points).

Journal of Applied Remote Sensing↗