USGS Science⌕ Search

SEARCH · USGS Science

Results for “Remote Sensing Information”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16Linked to original sources
USGS1990

Lava flow surface textures: SIR-B radar image texture, field observations, and terrain measurements

Space Shuttle Imaging Radar (SIR-8) images, field observations, and small-scale (cm) terrain measurements are used to study lava flow surface textures related to emplacement processes of a single hawaiian lava flow. Although smooth pahoehoe textures are poorly characterized on the SIR-B data, rougher pahoehoe types and the a'a flow portion show image textures attributed to spatial variations in surface roughness. Field observations of six distinct lava flow textural units are described and used to interpret modes of emplacement. Terrain measurements of these units show that surface roughness differs across and along the flow, apparently due to shear during flow emplacement. The radar smooth/rough boundary between pahoehoe and a'a occurs at a vertical relief of -10 cm on this lava flow. While direct observation and measurement most readily yield information related to lava eruption and emplacement processes, analyses of remote sensing data such as those acquired by imaging radars and altimeters can provide a means of quantifying surface texture, identifying the size and distribution of flow components, and delineating textural unit boundaries.

Hawaii↗
USGS2023

System characterization report on the BlackSky Global multispectral sensor

Executive Summary This report addresses system characterization of the BlackSky Global satellites and is part of a series of system characterization reports produced and delivered by the U.S. Geological Survey Earth Resources Observation and Science Cal/Val Center of Excellence. These reports present and detail the methodology and procedures for characterization; present technical and operational information about the specific sensing system being evaluated; and provide a summary of test measurements, data retention practices, data analysis results, and conclusions. The BlackSky Global satellites are three-band multispectral imagers (red, green, and blue multispectral bands plus a panchromatic band) with a 0.8- to 0.9-meter (m) pixel ground sample distance for the assessed satellites. BlackSky Global satellites 9 and 12–17 were launched in March and December 2021, respectively, into a Sun-synchronous orbit of 430–450 kilometers with an inclination of 42–53 degrees and a swath width of 6 kilometers at nadir. Each Global satellite has an expected lifetime of about 3 years. More information on the BlackSky Global satellites is available in the “Land Remote Sensing Satellites Online Compendium” ( https://calval.cr.usgs.gov/apps/compendium ) and from BlackSky at Real-Time Space-Based Intelligence (blacksky.com) The Earth Resources Observation and Science Cal/Val Center of Excellence system characterization team completed data analyses to characterize the geometric (interior and exterior) and spatial performances. Results of these analyses indicate that the assessed BlackSky Global satellites have an interior geometric performance in the range of −0.011 m (−0.012 pixel) to 0.007 m (0.008 pixel) in easting and −0.018 m (−0.020 pixel) to 0.012 m (0.013 pixel) in northing in band-to-band registration; an exterior geometric performance using ground control points of 8.0-m circular error (95-percent certainty) for orthorectified products and 10.7- to 17.4-m circular error (95-percent certainty) for nonorthorectified products, depending on the geolocation metadata used; and a spatial performance in the range of 1.70 to 2.43 pixels for full width at half maximum, with a modulation transfer function at a Nyquist frequency in the range of 0.032 to 0.084.

Open-File Report↗
USGS1981

Objectives, accomplishments, and future plans of IGCP project 143, remote sensing and mineral exploration

The International Geological Correlation Programme (IGCP) is a worldwide cooperative research programme that began in 1974 under the auspices of the International Union of Geological Sciences. Because of the global availability of Earth resources data collected by satellites and the great interest among geologists in taking advantage of these new sources of information, a project was begun in 1976 to improve the rate of technology transfer in the field of remote-sensing exploration for energy and mineral resources. Conducting joint workshops in cooperation with COSPAR has been an important part of this project. It is to be hoped the project will improve our capability to explore, identify, and develop new resources to meet the burgeoning demands of society. ?? 1981.

Advances in Space Research↗
USGS2021

System characterization report on the China-Brazil Earth Resources Satellite-4A (CBERS–4A)

Executive Summary This report addresses system characterization of the China-Brazil Earth Resources Satellite-4A (CBERS–4A) multispectral remote sensing satellite and is part of a series of system characterization reports produced and delivered by the U.S. Geological Survey Earth Resources Observation and Science Cal/Val Center of Excellence in 2021. These reports present and detail the methodology and procedures for characterization; present technical and operational information about the specific sensing system being evaluated; and provide a summary of test measurements, data retention practices, data analysis results, and conclusions. CBERS–4A is a joint Chinese-Brazilian medium-resolution satellite launched in December 2019 by the China National Space Agency/National Institute for Space Research (Brazil) on a Chang Zheng 4B rocket from the Taiyuan Satellite Launch Center for Earth resources monitoring. The CBERS–4A mission continues the CBERS mission that has been in continual operation since the launch of CBERS–1 in 1999. The CBERS–4A satellite was designed and built by Academia Chinesa de Tecnologia Espacial/National Institute for Space Research and uses the Phoenix-Eye bus. CBERS–4A carries the multispectral camera and wide field imager sensors for medium-resolution land imaging and the wide swath panchromatic and multispectral camera sensor for high-resolution land imaging. This assessment focused on the multispectral camera sensor only. More information on CBERS sensors is available in the “ 2020 Joint Agency Commercial Imagery Evaluation—Remote Sensing Satellite Compendium ” and at https://www.gov.br/pt-br/servicos/obter-imagens-de-sensoriamento-remoto-da-terra-geradas-pelo-satelite-cbers-04a . The Earth Resources Observation and Science Cal/Val Center of Excellence system characterization team completed data analyses to characterize the geometric (interior and exterior), radiometric, and spatial performances. Results of these analyses indicate that CBERS–4A provides an interior (band-to-band) geometric performance in the range of −0.02 to −0.16 pixel; an exterior geometric accuracy performance of −22.02 (−1.47 pixels) to −16.06 meters (−1.07 pixels); a radiometric accuracy performance of –0.006 to 0.925 (offset and slope); and a spatial performance for relative edge response in the range of 0.39 to 0.44, for full width at half maximum in the range of 2.38 to 2.56 pixels, and for a modulation transfer function at a Nyquist frequency in the range of 0.001 to 0.013.

Open-File Report↗
USGS1983

Trends in Engineering Geologic and Related Mapping 1972–1983

Progress is reviewed that has been made during the period 1972-1982 in producing medium- and small-scale engineering geologic maps with a variety of content. Improved methods to obtain and present information are evolving. Standards concerning text and map content, soil and rock classification, and map symbols have been proposed. Application of geomorphological techniques in terrain evaluation has increased, as has the use of aerial photography and other remote sensing. Computers are being used to store, analyze, retrieve, and print both text and map information. Development of offshore resources, especially petroleum, has led to marked improvement and growth in marine engineering geology and geotechnology. Coordinated planning for societal needs has required broader scope and increased complexity of both engineering geologic and environmental geologic studies. Refs.

Bulletin of the Association of Engineering Geologi↗
USGS2010

U.S. Geological Survey (USGS) Earth Resources Observation and Science (EROS) Center-Fiscal Year 2009 Annual Report

The Earth Resources Observation and Science (EROS) Center is a U.S. Geological Survey (USGS) facility focused on providing science and imagery to better understand our Earth. As part of the USGS Geography Discipline, EROS contributes to the Land Remote Sensing (LRS) Program, the Geographic Analysis and Monitoring (GAM) Program, and the National Geospatial Program (NGP), as well as our Federal partners and cooperators. The work of the Center is shaped by the Earth sciences, the missions of our stakeholders, and implemented through strong program and project management and application of state-of-the-art information technologies. Fundamentally, EROS contributes to the understanding of a changing Earth through 'research to operations' activities that include developing, implementing, and operating remote sensing based terrestrial monitoring capabilities needed to address interdisciplinary science and applications objectives at all levels-both nationally and internationally. The Center's programs and projects continually strive to meet and/or exceed the changing needs of the USGS, the Department of the Interior, our Nation, and international constituents. The Center's multidisciplinary staff uses their unique expertise in remote sensing science and technologies to conduct basic and applied research, data acquisition, systems engineering, information access and management, and archive preservation to address the Nation's most critical needs. Of particular note is the role of EROS as the primary provider of Landsat data, the longest comprehensive global land Earth observation record ever collected. This report is intended to provide an overview of the scientific and engineering achievements and illustrate the range and scope of the activities and accomplishments at EROS throughout fiscal year (FY) 2009. Additional information concerning the scientific, engineering, and operational achievements can be obtained from the scientific papers and other documents published by EROS staff. We welcome comments and follow-up questions on any aspect of this Annual Report and invite any of our customers or partners to contact us at their convenience. To communicate with us, or for more information about EROS, contact: Communications and Outreach, USGS EROS Center, 47914 252nd Street, Sioux Falls, South Dakota 57198, jsnelson@usgs.gov, http://eros.usgs.gov/.

Open-File Report↗
USGS2024

Remote sensing-based 3D assessment of landslides: A review of the data, methods, and applications

Remote sensing (RS) techniques are essential for studying hazardous landslide events because they capture information and monitor sites at scale. They enable analyzing causes and impacts of ongoing events for disaster management. There has been a plethora of work in the literature mostly discussing (1) applications to detect, monitor, and predict landslides using various instruments and image analysis techniques, (2) methodological mechanics in using optical and microwave sensing, and (3) quantification of surface geological and geotechnical changes using 2D images. Recently, studies have shown that the degree of hazard is mostly influenced by speed, type, and volume of surface deformation. Despite available techniques to process lidar and image/radar-derived 3D geometry, prior works mostly focus on using 2D images, which generally lack details on the 3D aspects of assessment. Thus, assessing the 3D geometry of terrain using elevation/depth information is crucial to determine its cover, geometry, and 3D displacements. In this review, we focus on 3D landslide analysis using RS data. We include (1) a discussion on sources, types, benefits, and limitations of 3D data, (2) the recent processing methods, including conventional, fusion-based, and artificial intelligence (AI)-based methods, and (3) the latest applications.

Remote Sensing↗
USGS1997

Estimating millet production for famine early warning: An application of crop simulation modelling using satellite and ground-based data in Burkina Faso

Early warning of impending poor crop harvests in highly variable environments can allow policy makers the time they need to take appropriate action to ameliorate the effects of regional food shortages on vulnerable rural and urban populations. Crop production estimates for the current season can be obtained using crop simulation models and remotely sensed estimates of rainfall in real time, embedded in a geographic information system that allows simple analysis of simulation results. A prototype yield estimation system was developed for the thirty provinces of Burkina Faso. It is based on CERES-Millet, a crop simulation model of the growth and development of millet ( Pennisetum spp.). The prototype was used to estimate millet production in contrasting seasons and to derive production anomaly estimates for the 1986 season. Provincial yields simulated halfway through the growing season were generally within 15% of their final (end-of-season) values. Although more work is required to produce an operational early warning system of reasonable credibility, the methodology has considerable potential for providing timely estimates of regional production of the major food crops in countries of sub-Saharan Africa.

Agricultural and Forest Meteorology↗
USGS2024

Investigation of land cover within wetland complexes at Dixie Meadows, Churchill County, Nevada, from October 2015 to January 2022

The U.S. Geological Survey investigated land cover at subannual time steps within six wetland areas in Dixie Valley, Churchill County, Nevada, from October 2015 to January 2022. As requested by the U.S. Fish and Wildlife Service, we used aerial photography and satellite remote sensing data to map surface water and other land cover types within the wetland complexes. We identified five land cover classes using the green normalized difference vegetation index (gNDVI) and its inverse relationship to the normalized difference water index (NDWI) within three U.S. Department of Agriculture National Agriculture Imagery Program aerial images (acquired in 2015, 2017, and 2019) and 110 European Space Agency Sentinel-2 satellite images (acquired 2015–2022). The relative wetness of soil conditions within each land cover class is estimated by comparison to previously published observations of relative conductivity measured by 79 field-based sensors within the wetlands from 2019 to 2021. We mapped the areal coverage of the five land cover classes for approximately 385 acres (1,559,000 square meters [m²]) comprising six individual wetland complexes as well as a larger 1,298- acre (5,254,000-m 2 ) area of interest inclusive of the wetland complexes and adjacent landscape. Land cover of open water (Class 5) primarily within ponds at one of the wetland complexes comprised 8,333 m 2 , on average, of the wetland complexes. Land cover of mixed shallow surface water, saturated soil, and vegetation (Class 4) comprised 111,723 m 2 on average of the wetland complexes. Land cover of dense green vegetation canopy cover (Class 3) that often (46 percent of observations) had underlying surface water or saturated soil conditions comprised 592,522 m 2 on average of the wetland complexes. The remaining areas of the wetland complexes not mapped as these three land cover types (Classes 2 and 1) had sparse vegetation or bare soil cover and commonly (greater than or equal to 67 percent of observations) had dry soil conditions. The investigation of land cover detailed in this report could inform future efforts to map land cover more precisely via higher resolution remote sensing or ground-based surveying or could be incorporated with other environmental monitoring data to characterize habitat and hydrology of the wetland complexes at Dixie Meadows.

Nevada↗
USGS2023

System characterization report on the Pléiades Neo Imager

Executive Summary This report addresses system characterization of the Pléiades Neo satellite and is part of a series of system characterization reports produced and delivered by the U.S. Geological Survey Earth Resources Observation and Science Cal/Val Center of Excellence. These reports present and detail the methodology and procedures for characterization; present technical and operational information about the specific sensing system being evaluated; and provide a summary of test measurements, data retention practices, data analysis results, and conclusions. Pléiades Neo is a constellation of four identical very-high-resolution optical satellites operated by Airbus Defence and Space. The first two satellites, Pléiades Neo-3 and -4, were launched in April and August 2021, respectively. The next two satellites, launched in December 2022, did not reach orbit because of Vega-C launch vehicle failure. Pléiades Neo provides several technical improvements to previous Pléiades-HR satellites, including the addition of coastal aerosol (deep blue) and red edge spectral bands, with improved ground sample distance and swath. The Pléiades Neo satellites were designed and built by Airbus Defence and Space with the high-resolution, multispectral imager for Earth imaging and use the S950 optical satellite bus. The high-resolution sensor on Pléiades Neo collects Earth data in the visible and near-infrared region with six bands and a panchromatic band. The satellites can operate off nadir to achieve a revisit of less than 1 day. More information on Pléiades Neo satellites and sensors is available in the “Land Remote Sensing Satellites Online Compendium” ( https://calval.cr.usgs.gov/apps/compendium# ) and from the manufacturer ( https://www.intelligence-airbusds.com/imagery/constellation/pleiades-Neo/ ). The Earth Resources Observation and Science Cal/Val Center of Excellence system characterization team completed data analyses to characterize the geometric (interior and exterior), radiometric, and spatial performances. Results of these analyses indicate that Pléiades Neo has an interior geometric performance in the range of 0.01 meter (m; 0.008 pixel) to −0.017 m (−0.014 pixel) in band-to-band registration; an exterior geometric performance in the range of −7.015 m (−0.702 pixel) to 3.846 m (0.385 pixel) offset in comparison to Sentinel-2 using ground control points of 2.2 to 7.2 m (95-percent circular error); a radiometric performance in the range of −0.070 (minimum) to −0.053 (maximum) in offset and 1.107 (minimum) to 1.202 (maximum) in slope; and a spatial performance in the range of 1.002 to 1.226 pixels at full width at half maximum with a modulation transfer function at a Nyquist frequency in the range of 0.22 to 0.34 (bands 2–7).

Open-File Report↗
USGS2023

Satellite remote sensing of river discharge: A framework for assessing the accuracy of discharge estimates made from satellite remote sensing observations

This research presents an evaluation of the accuracy and uncertainty of estimates of river discharge made using satellite observed data sources as input to a modified form of Manning’s equation. Conventional U.S. Geological Survey (USGS) streamflow gaging station data and in-situ measurements of width, depth, height, slope, discharge, and velocity from 30 USGS gage sites were used as ground-truth to assess accuracy. This study explores accuracy in relation to the amount of ground truth information available, the number of calibration points available, and the accuracy of the input data. This research indicates that remotely sensed discharge estimates associated with the modified Manning equation may be expected to have an uncertainty in range of 10% overall given a sufficient number of calibration points. The uncertainty associated with the modified Manning algorithm increased markedly for depths <3 meters (m) and for discharges <1000 cubic meters per second (m 3 / s) for many rivers after calibration. Rivers that exhibit (1) a wide range of flow conditions, (2) a significant number of dams in the watershed and along the channel, and (3) a high baseflow index are more likely to have relatively large errors overall and particularly at the low end of the streamflow range. Uncertainty in remotely sensed measurements of water-surface elevation (WSE) and width in the expected range (WSE, + / − 10 cm; Width, + / − 15 m) introduces uncertainty in the discharge estimates on the order of 10% and is greatest at the low end of discharge as rivers get shallower and narrower. As WSE and width measurement uncertainty increases, discharge uncertainty increases accordingly. In general, the observation errors are greater than the errors associated with the algorithm for a well-calibrated model (e.g., 20 calibration points).

Journal of Applied Remote Sensing↗
USGS1971

Application of remote sensing techniques for appraising changes in wildlife habitat

An attempt was made to investigate the potential of airborne, multispectral, line scanner data acquisition and computer-implemented automatic recognition techniques for providing useful information about waterfowl breeding habitat in North Dakota. The spectral characteristics of the components of a landscape containing waterfowl habitat can be detected with airborne scanners. By analyzing these spectral characteristics it is possible to identify and map the landscape components through analog and digital processing methods. At the present stage of development multispectral remote sensing techniques are not ready for operational application to surveys of migratory bird habitat and other such resources. Further developments are needed to: (1) increase accuracy; (2) decrease retrieval and processing time; and (3) reduce costs.

North Dakota↗
USGS2007

Identification, prediction, and mitigation of sinkhole hazards in evaporite karst areas

Sinkholes usually have a higher probability of occurrence and a greater genetic diversity in evaporite terrains than in carbonate karst areas. This is because evaporites have a higher solubility and, commonly, a lower mechanical strength. Subsidence damage resulting from evaporite dissolution generates substantial losses throughout the world, but the causes are only well understood in a few areas. To deal with these hazards, a phased approach is needed for sinkhole identification, investigation, prediction, and mitigation. Identification techniques include field surveys and geomorphological mapping combined with accounts from local people and historical sources. Detailed sinkhole maps can be constructed from sequential historical maps, recent topographical maps, and digital elevation models (DEMs) complemented with building-damage surveying, remote sensing, and high-resolution geodetic surveys. On a more detailed level, information from exposed paleosubsidence features (paleokarst), speleological explorations, geophysical investigations, trenching, dating techniques, and boreholes may help in investigating dissolution and subsidence features. Information on the hydrogeological pathways including caves, springs, and swallow holes are particularly important especially when corroborated by tracer tests. These diverse data sources make a valuable database-the karst inventory. From this dataset, sinkhole susceptibility zonations (relative probability) may be produced based on the spatial distribution of the features and good knowledge of the local geology. Sinkhole distribution can be investigated by spatial distribution analysis techniques including studies of preferential elongation, alignment, and nearest neighbor analysis. More objective susceptibility models may be obtained by analyzing the statistical relationships between the known sinkholes and the conditioning factors. Chronological information on sinkhole formation is required to estimate the probability of occurrence of sinkholes (number of sinkholes/km2 year). Such spatial and temporal predictions, frequently derived from limited records and based on the assumption that past sinkhole activity may be extrapolated to the future, are non-corroborated hypotheses. Validation methods allow us to assess the predictive capability of the susceptibility maps and to transform them into probability maps. Avoiding the most hazardous areas by preventive planning is the safest strategy for development in sinkhole-prone areas. Corrective measures could be applied to reduce the dissolution activity and subsidence processes. A more practical solution for safe development is to reduce the vulnerability of the structures by using subsidence-proof designs. ?? 2007 Springer-Verlag.

Conference Paper↗
USGS2023

Synergistic soil, land use, and climate influences on wind erosion on the Colorado Plateau: Implications for management

Two decades of drought in the southwestern USA are spurring concerns about increases in wind erosion, dust emissions, and associated impacts on ecosystems, agriculture, human health, and water supply. Different avenues of investigation into primary drivers of wind erosion and dust have yielded mixed results depending on the spatial and temporal sensitivity of the evidence. We monitored passive aeolian sediment traps from 2017 to 2020 across eighty-one sites near Moab UT to understand patterns of sediment flux. At measurement sites we collated climate, soil, topography and vegetation spatial layers to better understand the context of wind erosion and then combine these data with field observations of land use in models to characterize the influence of cattle grazing, oil and gas well pads, and vehicle/heavy equipment disturbance that potentially drive both exposure of bare soil and increases in erodible sediment supply that increase vulnerability to erosion. Disturbed areas with low soil calcium carbonate content yielded high sediment transport in dry years, but notably areas with little disturbance and low bare soil exposure had much less activity. Cattle grazing had the largest land use association with erosional activity with analyses suggesting that both herbivory and trampling from cattle could be drivers. The amount and distribution of bare soil exposure from new sub-annual fractional cover remote sensing products proved very helpful in mapping erosion, and new predictive maps informed by field data are presented to help depict spatial patterns of wind erosion activity. Our results suggest that despite the magnitude of current droughts, minimizing surface disturbance in vulnerable soils can mitigate a large portion of dust emissions. Results can help managers identify eroding areas where disturbance reduction and soil surface protection measures can be prioritized.

Science of the Total Environment↗
USGS2018

Characteristics of tropical tree species in hyperspectral and multispectral data

Remote sensing has been hailed as a promising technology to provide spatially explicit information on tree species distribution. Such information is of high value for ecologists and forest managers, particularly in tropical environments in which it is acquired by costly field inventories performed at the plot level (∼1 ha). Over the last decade, hyperspectral sensors, usually on board airborne platforms, have been successfully employed for tropical tree species classification. Most of the studies focused on the improvement of the classification accuracy, without examining the sources of variability in canopy reflectance that contribute to discriminate among species. Trees of different species usually feature distinct crown structural and chemical characteristics defined by size, shape, leaf density, branching, pigment and nonpigment biochemical constituents, among others. Understanding the role of these characteristics on tree species discrimination is important to improve and optimize the use of hyperspectral data. Here, we show how spectral characteristics of tree species, from highly diverse tropical forests, are related to their chemical and structural properties. These spectral characteristics were retrieved by spectral mixture and feature analysis, using narrow-band data acquired in the optical domain (450–2400 nm). Finally, we assessed how the spectral resolution affects the classification accuracy and spectral separability.

Book chapter↗
USGS2017

Comparing automated classification and digitization approaches to detect change in eelgrass bed extent during restoration of a large river delta

Native eelgrass ( Zostera marina ) is an important contributor to ecosystem services that supplies cover for juvenile fish, supports a variety of invertebrate prey resources for fish and waterbirds, provides substrate for herring roe consumed by numerous fish and birds, helps stabilize sediment, and sequesters organic carbon. Seagrasses are in decline globally, and monitoring changes in their growth and extent is increasingly valuable to determine impacts from large-scale estuarine restoration and inform blue carbon mapping initiatives. Thus, we examined the efficacy of two remote sensing mapping methods with high-resolution (0.5 m pixel size) color near infrared imagery with ground validation to assess change following major tidal marsh restoration. Automated classification of false color aerial imagery and digitized polygons documented a slight decline in eelgrass area directly after restoration followed by an increase two years later. Classification of sparse and low to medium density eelgrass was confounded in areas with algal cover, however large dense patches of eelgrass were well delineated. Automated classification of aerial imagery from unsupervised and supervised methods provided reasonable accuracies of 73% and hand-digitizing polygons from the same imagery yielded similar results. Visual clues for hand digitizing from the high-resolution imagery provided as reliable a map of dense eelgrass extent as automated image classification. We found that automated classification had no advantages over manual digitization particularly because of the limitations of detecting eelgrass with only three bands of imagery and near infrared.

Washington↗
USGS2007

Integrating observation and statistical forecasts over sub-Saharan Africa to support Famine Early Warning

Famine early warning in Africa presents unique challenges and rewards. Hydrologic extremes must be tracked and anticipated over complex and changing climate regimes. The successful anticipation and interpretation of hydrologic shocks can initiate effective government response, saving lives and softening the impacts of droughts and floods. While both monitoring and forecast technologies continue to advance, discontinuities between monitoring and forecast systems inhibit effective decision making. Monitoring systems typically rely on high resolution satellite remote-sensed normalized difference vegetation index (NDVI) and rainfall imagery. Forecast systems provide information on a variety of scales and formats. Non-meteorologists are often unable or unwilling to connect the dots between these disparate sources of information. To mitigate these problem researchers at UCSB's Climate Hazard Group, NASA GIMMS and USGS/EROS are implementing a NASA-funded integrated decision support system that combines the monitoring of precipitation and NDVI with statistical one-to-three month forecasts. We present the monitoring/forecast system, assess its accuracy, and demonstrate its application in food insecure sub-Saharan Africa.

Conference Paper↗
USGS2003

A strategy for mapping mid-scale existing vegetation in support of national fire fuel assessment

Geospatial distribution of natural vegetation is among the very important environmental parameters required for applications ranging from global climate change to monitoring of natural hazards, monitoring of ecosystem vitality, and fire management practices. Increasingly sophisticated applications require vegetation datasets to cover large areas at a suitable scale and provide sufficiently detailed information. In this paper, we describe a research effort to develop a remote sensing methodology capable of producing 30-meter resolution, wall-to-wall coverage of existing vegetation types and structure variables in support of a multi-agency fire fuels and fire risks assessment project. Success of this remote sensing research effort is dependent on improved sensor and data qualities, a thorough understanding of regional and local vegetation ecology, successful integration of remote sensing with a large amount of field plot data, and flexible mapping algorithms. Preliminary results produced in the Wasatch Range and Uinta Mountains of central Utah include 28 vegetation types with an overall accuracy of 60% (average by life forms), percent canopy density (sub-pixel density) of forest, shrub, and herbaceous cover (correlation coefficient of 89, 60, and 55% respectively), and average top canopy height of forest, shrub, and herbaceous cover (correlation coefficient of 73, 50, 20% respectively). Techniques to improve the first-round results are discussed, including refinements of mapping models and use of relevant environmental gradients and potential vegetation classification associated with actual vegetation types.

Conference Paper↗