SEARCH · USGS Science

Results for “Near Surface Geophysics”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16Linked to original sources

USGS1999

An example of neotectonism in a continental interior - Thebes Gap, Midcontinent, United States

Some of the most intense neotectonic activity known in the continental interior of North America has been recently discovered on a fault zone in the Thebes Gap area, Missouri and Illinois. This faulting almost assuredly was accompanied by large earthquakes. The zone is located approximately 30 km north of the New Madrid seismic zone and consists of complex north-northeast- to northeast-striking, steeply dipping faults that have had a long-lived history of reactivation throughout most of the Phanerozoic. Geophysical studies by others suggest that the faults are rooted in the deeply buried Late Proterozoic and Early Cambrian Reelfoot rift system. Quaternary deposits are cut by at least four episodes of faulting, two of which occurred during the Holocene. The overall style of neotectonic deformation is interpreted as right-lateral strike-slip faulting. At many locations, however, near-surface displacements have stepped from one fault strand to another and produced normal and oblique-slip faults in areas of transtension and high-angle reverse faults, thrust faults, and folds in areas of transpression. There is evidence of reactivation of some near-surface fault segments during the great 1811-1812 New Madrid earthquakes. Quaternary faulting at Thebes Gap demonstrates that there are additional seismic-source zones in the Midcontinent, U.S., other than New Madrid, and that even in the absence of plate-margin orogenesis, intense neotectonic activity does occur over long time periods along crustal weakenesses in continental interiors.

Tectonophysics↗

USGS2014

Radiotracer experiments in the Mohawk River, New York, to study sewage path and dilution

Sewage from the Knolls Atomic Power Laboratory near Schenectady, N. Y., was dosed with 4.53 curies of P prior to discharge into the Mohawk River. Its pattern of diffusion was measured in the river with immersible GM‐tubes and by sampling. The initial path of sewage was strongly influenced by differences in density between sewage and river due to temperature. During warm months relatively cold sewage moved on the river bottom perpendicularly to river current. For at least the first 800 ft of travel the maximum sewage concentration decreased logarithmically with distance from outfall. The term ‘half‐distance’ (here about 110 ft) is proposed to describe the concentration change. During cold months sewage rose to the river surface and at times was moved upstream by wind. However, when the river temperature was near freezing, the sewage first rose and then sank as the temperature of the sewage‐river mixture approached 39° F.

New York↗

USGS2008

Effect of 3-D viscoelastic structure on post-seismic relaxation from the 2004 M = 9.2 Sumatra earthquake

The 2004 M=9.2 Sumatra-Andaman earthquake profoundly altered the state of stress in a large volume surrounding the ???1400 km long rupture. Induced mantle flow fields and coupled surface deformation are sensitive to the 3-D rheology structure. To predict the post-seismic motions from this earthquake, relaxation of a 3-D spherical viscoelastic earth model is simulated using the theory of coupled normal modes. The quasi-static deformation basis set and solution on the 3-D model is constructed using: a spherically stratified viscoelastic earth model with a linear stress-strain relation; an aspherical perturbation in viscoelastic structure; a 'static'mode basis set consisting of Earth's spheroidal and toroidal free oscillations; a "viscoelastic" mode basis set; and interaction kernels that describe the coupling among viscoelastic and static modes. Application to the 2004 Sumatra-Andaman earthquake illustrates the profound modification of the post-seismic flow field at depth by a slab structure and similarly large effects on the near-field post-seismic deformation field at Earth's surface. Comparison with post-seismic GPS observations illustrates the extent to which viscoelastic relaxation contributes to the regional post-seismic deformation. ?? Journal compilation ?? 2008 RAS.

Geophysical Journal International↗

USGS2024

Earth’s free surface complicates inference of absolute stress from earthquake-Induced stress rotations

The stress redistribution from an earthquake can produce localized measurable rotations of the principal stress axes if the absolute level of differential stress in the crust in on the order of the earthquake stress drop. Two simple analytic solutions have been developed to estimate the differential stress from an observed stress rotation. However, each has assumptions that may not be accurate near Earth’s free surface. I model synthetic earthquakes in an elastic half-space, and show that the assumptions of the methods are accurate for strike-slip earthquakes, and for deep dip-slip earthquakes. However, they are incorrect for shallow dip-slip earthquakes. I introduce a free surface correction for one of the methods for dip-slip earthquakes. I revise an analysis of stress rotations due to great subduction zone earthquakes, including this correction. The results support the original conclusion of near complete stress drop for many shallow subduction zone earthquakes.

Geophysical Research Letters↗

USGS2012

The Galapagos Spreading Centre at 86° W: A detailed geothermal field study

We report here measurements of the heat flow field of the Galapagos Spreading Center on crust of age less than 1.0 m.y. The 443 measurements in an area of about 570 km 2 reveal the general planform of the geothermal flux and permit the first truly areal estimate of the near-axis conductive heat flux. The intrusion process and associated hydrothermal circulation dominate the surface heat flow pattern, with circulation apparently continuing beyond the limits of our survey. The areal average of the conductive heat flux is 7.1 ± 0.8 HFU (295 ± 33 mW/m 2 ), about one-third the heat flux predicted by plate models. The remaining heat is apparently removed by venting of hydrothermal waters at the spreading axis and through basalt outcrops and hydrothermal mounds off axis. The pattern of surface heat flux is lineated parallel to the axis and the strongly lineated topography. Sharp lateral gradients in the heat flow, greater than 10 HFU/km near escarpments and commonly expressed as high heat flow at the tops of the scarps and lower heat flow in the valleys, may indicate a local concentration of the circulation by surface fault systems and/or variable sediment thickness.

Journal of Geophysical Research Solid Earth↗

USGS2007

Chemical Characteristics, Water Sources and Pathways, and Age Distribution of Ground Water in the Contributing Recharge Area of a Public-Supply Well near Tampa, Florida, 2002-05

In 2001, the National Water-Quality Assessment (NAWQA) Program of the U.S. Geological Survey began a series of studies on the transport of anthropogenic and natural contaminants (TANC) to public-supply wells. The main goal of the TANC program was to better understand the source, transport, and receptor factors that control contaminant movement to public-supply wells in representative aquifers of the United States. Studies were first conducted at regional scales at four of the eight TANC study areas during 2002-03 and at small (local) scales during 2003-05 in California, Nebraska, Connecticut, and Florida. In the Temple Terrace study area near Tampa, Florida, multiple chemical indicators and geochemical and ground-water flow modeling techniques were used to assess the vulnerability of a public-supply well in the karstic Upper Floridan aquifer to contamination from anthropogenic and naturally occurring contaminants. During 2003-05, water samples were collected from the public-supply well and 13 surrounding monitoring wells that all tap the Upper Floridan aquifer, and from 15 monitoring wells in the overlying surficial aquifer system and the intermediate confining unit that are located within the modeled ground-water contributing recharge area of the public-supply well. Six volatile organic compounds and four pesticides were detected in trace concentrations (well below drinking-water standards) in water from the public-supply well, which had an open interval from 36 to 53 meters below land surface. These contaminants were detected more frequently in water samples from monitoring wells in the overlying clastic surficial aquifer system than in water from monitoring wells in the Upper Floridan aquifer in the study area. Likewise, nitrate-N concentrations in the public-supply well (0.72-1.4 milligrams per liter) were more similar to median concentrations in the oxic surficial aquifer system (2.1 milligrams per liter) than to median nitrate-N concentrations in the anoxic Upper Floridan aquifer (0.06 milligram per liter) under sulfate-reducing conditions. High concentrations of radon-222 and uranium in the public-supply well compared to those in monitoring wells in the Upper Floridan aquifer appear to originate from water moving downward through sands and discontinuous clay lenses that overlie the aquifer. Water samples also were collected from three overlapping depth intervals (38-53, 43-53, and 49-53 meters below land surface) in the public-supply well. The 49- to 53-meter interval was identified as a high-flow zone during geophysical logging of the wellbore. Water samples were collected from these depth intervals at a low pumping rate by placing a low-capacity submersible pump (less than 0.02 cubic meter per minute) at the top of each interval. To represent higher pumping conditions, a large-capacity portable submersible pump (1.6 cubic meters per minute) was placed near the top of the open interval; water-chemistry samples were collected using the low-capacity submersible pump. The 49- to 53-meter depth interval had distinctly different chemistry than the other two sampled intervals. Higher concentrations of nitrate-N, atrazine, radon, trichloromethane (chloroform), and arsenic (and high arsenic (V)/arsenic (III) ratios); lower concentrations of dissolved solids, strontium, iron, manganese, and lower nitrogen and sulfur isotope ratios were found in this highly transmissive zone in the limestone than in water from the two other depth intervals. Movement of water likely occurs from the overlying sands and clays of the oxic surficial aquifer system and intermediate confining unit (that contains high radon-222 and nitrate-N concentrations) into the anoxic Upper Floridan aquifer (that contains low radon-222 and nitrate-N concentrations). Differences in arsenic concentrations in water from the various depth intervals in the public-supply well (3.2-19.0 micrograms per liter) were related to pumping conditions. The high arsenic

Scientific Investigations Report↗

USGS1993

Geophysical investigations of buried volcanic centers near Yucca Mountain, Southwest Nevada

Several aeromagnetic dipolar anomalies occur over flat, alluvial areas near Yucca Mountain that resemble anomalies typically associated with subaerial basaltic volcanic centers. Detailed gravity and ground magnetic data were collected along a surveyed traverse across an aeromagnetic anomaly in Amargosa Valley, south of Yucca Mountain, Nevada. Modeling of the ground magnetic data collected over the largest of these anomalies, the Lathrop Wells aeromagnetic anomaly, indicates that the top of the causative body, most likely basalt, is less than 250 m below the surface. Gravity data indicate an apparent lack of an associated gravity anomaly and suggest that either the causative body may be tuff rather than basalt, or the volume of the body is small. Both drilling and collection of more magnetic and gravity data are necessary because ages and volumes of buried volcanic centers are important constraints for estimating the probability of potential volcanism near the proposed nuclear waste repository at Yucca Mountain.

Conference Paper↗

USGS1998

The Holocene sea-level highstand in the equatorial Pacific: Analysis of the insular paleosea-level database

A review of the literature provides 92 estimates of the middle to late Holocene sea-level highstand on Pacific Islands. These data generally support geophysical model calculations that predict a +1 to 3 m relative sea-level highstand on oceanic islands due to the Earth’s rheological response to the melting of the last continental ice sheets and subsequent redistribution of meltwater. Both predictions and observations indicate sea level was higher than present in the equatorial Pacific between 5000 and 1500 y B.P. A non-linear relationship exists between the age and elevation of the highstand peak, suggesting that different rates of isostatic adjustment may occur in the Pacific, with the highest rates of sea-level fall following the highstand near the equator. It is important to resolve detailed sea-level histories from insular sites to test and refine models of climatic, oceanographic, and geophysical processes including hydroisostasy, equatorial ocean siphoning, and lithospheric flexure that are invoked as mechanisms affecting relative sea-level position. We use a select subset of the available database meeting specific criteria to examine model relationships of paleosea-surface topography. This new evaluated database of paleosea-level positions is also validated for testing and constraining geophysical model predictions of past and present sea-level variations.

Coral Reefs↗

USGS2012

Deep volcanic tremor and magma ascent mechanism under Kilauea, Hawaii

Deep harmonic tremor originating at depths around 40 km under Kilauea was studied using records accumulated since 1962 at the Hawaii Volcano Observatory of the U.S. Geological Survey. The deep source of the tremor was determined by onset times and confirmed by the relative amplitude across the island-wide network of seismometers. The period of tremor was conclusively shown to be determined by the source effect and not by the path or station site effect because the period would change considerably in time but maintained uniformity across the seismic net during the tremor episode. The tremor appeared to be primarily composed of P waves. We interpret the observed period and amplitude in terms of the stationary crack model of Aki et al. (1977) and find that the seismic moment rates for deep tremors are considerably larger than those for shallow-tremors suggesting more vigorous transport for the former. We propose a kinematic source model which may be more appropriate for deep tremor. According to this model, a measurable quantity called ‘reduced displacement’ is directly proportional to the rate of magma flow. A systematic search for deep tremor episodes was made for the period from 1962 through 1979, and the amplitude, period, and duration of the tremor were tabulated. We then constructed a cumulative reduced-displacement plot over the 18-year period. The result shows a generally steady process which does not seem to be significantly affected by major eruptions and large earthquakes near the surface. The total magma flow estimated from the reduced displacement is however, one order of magnitude smaller than that estimated by Swanson (1972). It may be that most channels transport magma aseismically, and only those with strong barriers generate tremor.

Hawaii↗

USGS1976

Geohydrology of the Albin and La Grange areas, aoutheastern Wyoming

The Albin and La Grange areas in southeastern Wyoming are two adjoining different hydrologic areas. Since ground water is the only source of water for irrigation in the Albin area, 34 irrigation wells have been drilled since 1968 and developed in conjunction mostly with center-pivot sprinkler systems that in 1974 irrigated about 6,980 acres. Most irrigation wells are developed in channel deposits of the Ogallala Formation of late Miocene. Water levels in parts of these channel deposits have declined about 4 to 7 feet since pumping began in 1968. In the La Grange area, lands are irrigated by surface water, ground water or a combination of both. The best producing wells are those completed in both the Brule Formation of Oligocene age and the alluvium. Secondary porosity was located and elevated in the Brule using caliper logs, an Acoustic Borehole Televiewer and geophysical logs. From the spring of 1970 to the spring of 1974, hydrographs of wells in parts of the La Grange area show water-level rises of about 5 feet resulting from the net effect of surface-water recharge and groundwater pumpage. Throughout the La Grange area no significant annual water-table declines have occurred. It is unlikely that irrigation wells pumping near Horse Creek have caused significant direct streamflow depletion.

Wyoming↗

USGS1996

Hydrogeology of the area near the J4 test cell, Arnold Air Force Base, Tennessee

The U.S. Air Force operates a major aerospace systems testing facility at Arnold Engineering Development Center (AEDC) in Coffee County, Tennessee. Dewatering operations at one of the test facilities, the J4 test cell, has affected the local ground-water hydrology. The J4 test cell is approximately 100 feet in diameter, extends approximately 250 feet below land surface, and penetrates several aquifers. Ground water is pumped continuously from around the test cell to keep the cell structurally intact. Because of the test cell's depth, dewatering has depressed water levels in the aquifers surrounding the site. The depressions that have developed exhibit anisotropy that is controlled by zones of high permeability in the aquifers. Additionally, contaminants - predominately volatile organic compounds - are present in the ground-water discharge from the test cell and in ground water at several other Installation Restoration Program (IRP) sites within the AEDC facility. The dewatering activities at J4 are drawing these contaminants from the nearby sites. The effects of dewatering at the J4 test cell were investigated by studying the lithologic and hydraulic characteristics of the aquifers, investigating the anisotropy and zones of secondary permeability using geophysical techniques, mapping the potentiometric surfaces of the underlying aquifers, and developing a conceptual model of the ground-water-flow system local to the test cell. Contour maps of the potentiometric surfaces in the shallow, Manchester, and Fort Payne aquifers (collectively, part of the Highland Rim aquifer system) show anisotropic water-level depressions centered on the J4 test cell. This anisotropy is the result of features of high permeability such as chert-gravel zones in the regolith and fractures, joints, and bedding planes in the bedrock. The presence of these features of high permeability in the Manchester aquifer results in complex flow patterns in the Highland Rim aquifers near the J4 test cell. The occurrence, distribution, and orientation of these features has a great effect on ground-water flow to the J4 test cell. The depression caused by dewatering extends out horizontally through the aquifers along the most permeable pathways. Since the aquifers above the Chattanooga Shale are not separated by distinct confining units, areas in adjacent aquifers above and below these zones of high permeability in the Manchester aquifer are also dewatered. Conditions in all Highland Rim aquifers approximate steady-state equilibrium because ground-water withdrawal at the test cell has been continuous since the late 1960's. The average ground-water discharge from the dewatering system at the J4 test cell was 105 gallons per minute, for 1992-95. The ground-water capture areas in each aquifer extend into all or parts of landfill #2 and leaching pit #2 (IRP site 1), the main testing area (IRP site 7), and the old fire training area (IRP site 10). IRP sites 8 and 12 are outside the ground-water capture areas. Of the 35 sampled wells in the J4 area, 10 produced water samples containing chlorinated organic compounds such as 1,2-dichloroethane (1,2-DCA), 1,1-dichloroethylene (1,1-DCE), and trichloroethylene (TCE) in concentrations which exceeded the Tennessee Department of Environment and Conservation Maximum Contaminant Levels (MCL's) for public water-supply systems. The highest concentrations were detected in samples from well AEDC-274 with 45 micrograms per liter (mg/L) 1,2-DCA, 320 mg/L 1,1-DCE, and 1,200 mg/L TCE. These compounds are synthetic and do not occur naturally in the environment. A sample of the ground-water discharge from the J4 test cell also contained concentrations of these compounds that exceed MCL's. Chlorinated organic compounds, including 1,2-DCA; 1,1-DCE; and TCE also have been detected at IRP sites 1, 7, 8, nd 10. The six dewatering wells surrounding the J4 test cell penetrate the Chattanooga Shale and are open to the Highland Rim aquifer system, there

Water-Resources Investigations Report↗

USGS2003

Searching for an electrical-grade geothermal resource in Northern Arizona to help geopower the west

The U.S Department of Energy s "Geopowering the West" initiative seeks to double the number of states (currently 4) that generate geothermal electric power over the next few years. Some states, like New Mexico and Oregon, have plentiful and conspicuous geothermal manifestations, and are thus likely to further DOE's goal relatively easily. Other states, including Arizona, demonstrate less geothermal potential, but nevertheless have sites worthy of additional investigation. The Arizona site with greatest potential is near Sunset Crater, a basaltic volcano less than 1,000 years old several kilometers northeast of Flagstaff. Several silicic volcanoes nearby are young enough to have still-hot intrusive roots. Moreover, there is geophysical evidence for magma or hot rock in middle to lower crust beneath the area. A high level of interest in this area by the geothermal industry during the 1970s waned because surface thermal indicators, such as high heat flow, hot springs, and fumaroles are absent. The absence of these features is probably the result of a well-documented deep and pervasive regional aquifer, which likely creates a thermal barrier to the rise of hydrothermal activity from depth, Surface based geological and geophysical studies are under way to evaluate further the geothermal potential of the area and to locate a site for a drill hole to explore for a hydrothermal system beneath the ground-water barrier.

California, Nevada↗

USGS1961

An aeromagnetic profile from anchorage to Nome, Alaska

A total-intensity profile was obtained on a 500-mile flight by a U. S. Geological Survey airplane from Anchorage to Nome , Alaska , on May 4, 1954. The average flight altitude was 6,000 ft above sea level except over the Alaska Range where the flight altitude was 9,000 ft. This profile crossed eight of the major tectonic elements of Alaska at right angles to their trend and gives valuable regional information in an area where other geophysical and geological information is scarce or lacking. The profile has a net gradient downward to the northwest, most of which is ascribed to the component of the earth's main magnetic field along the flight traverse. The great variety of magnetic anomalies which are superimposed on this gradient originate from variations in lithology along the traverse. All the magnetic anomalies, except a large one over the Yukon River, are caused by magnetic rocks at or near the surface. The magnetic profile may be divided into four major segments and nine subsegments, each having a characteristic magnetic pattern. Most of these can be related to a tectonic unit. The large plutons of the Talkeetna geanticline are clearly defined by a group of anomalies having the highest amplitudes of any on the profile . The Matanuska geosyncline to the east is represented by a 25-mile section of sloping profile consistent with a thick sedimentary section but indicating that the geosyncline is comparatively narrow near Anchorage . The 200-mile central magnetic segment is relatively free from all but very minor anomalies. This segment includes the Alaska Range geosyncline, the Tanana geanticline, and the Kuskokwim geosyncline; showing only slight magnetic contrasts between each of these elements. The two geosynclines either have thick Mesozoic sedimentary sections or have underlying crystalline rocks which are low in magnetic susceptibility at shallow depths. The rocks of the geanticline have a low but not negligible magnetic susceptibility and are predominantly Paleozoic sedimentary rocks. A single 300-gamma anomaly on the west edge of the central segment is caused by a small, mafic intrusive body in the Paleozoic metamorphic rocks of Mt. Hurst. West of this anomaly the profile consists of a series of small sharp anomalies which are probably caused by Paleozoic metavolcanic rocks of the Ruby geanticline. The second largest anomaly on the profile is in the Koyukuk geosyncline over the Yukon River. The source is calculated to be more than a mile deep and may be an intrusive body at least 15 miles wide. This anomaly is flanked by 20-mile sections of flat or sloping profile which indicate areas of thick sedimentary rocks, particularly in the region west of the Yukon River. The 150-mile Norton Sound magnetic segment on the western end of the profile consists of many closely spaced anomalies produced by rocks which are either volcanic or similar to the Seward complex. Of the four Cenozoic basins or lowlands crossed by the profile , three are underlain by rocks of moderate to high magnetic susceptibility at shallow depths. These are the Cook Inlet basin, part of which overlaps rocks of the Talkeetna geanticline, the Innoko basin of central Alaska which overlies the rocks of the Ruby geanticline, and the Norton basin, in which sedimentary deposits are thin or absent. The fourth, the Minchumina basin, is underlain by the low-susceptibility rocks at the Tanana geanticline, which are also probably close to the surface.

Alaska↗

USGS2016

Using smooth sheets to describe groundfish habitat in Alaskan waters, with specific application to two flatfishes

In this analysis we demonstrate how preferred fish habitat can be predicted and mapped for juveniles of two Alaskan groundfish species – Pacific halibut ( Hippoglossus stenolepis ) and flathead sole ( Hippoglossoides elassodon ) – at five sites (Kiliuda Bay, Izhut Bay, Port Dick, Aialik Bay, and the Barren Islands) in the central Gulf of Alaska. The method involves using geographic information system (GIS) software to extract appropriate information from National Ocean Service (NOS) smooth sheets that are available from NGDC (the National Geophysical Data Center). These smooth sheets are highly detailed charts that include more soundings, substrates, shoreline and feature information than the more commonly-known navigational charts. By bringing the information from smooth sheets into a GIS, a variety of surfaces, such as depth, slope, rugosity and mean grain size were interpolated into raster surfaces. Other measurements such as site openness, shoreline length, proportion of bay that is near shore, areas of rocky reefs and kelp beds, water volumes, surface areas and vertical cross-sections were also made in order to quantify differences between the study sites. Proper GIS processing also allows linking the smooth sheets to other data sets, such as orthographic satellite photographs, topographic maps and precipitation estimates from which watersheds and runoff can be derived. This same methodology can be applied to larger areas, taking advantage of these free data sets to describe predicted groundfish essential fish habitat (EFH) in Alaskan waters.

Alaska↗

USGS2019

Depth determination of the 2010 El Mayor‐Cucapah earthquake sequence (M ≥ 4.0)

The 2010 M W 7.2 El Mayor‐Cucapah earthquake ruptured a zone of ~120 km in length in northern Baja California. The geographic distribution of this earthquake sequence was well constrained by waveform relocation. The depth distribution, however, was poorly determined as it is near the edge of, or outside, the Southern California Seismic Network. Here we use two complementary methods to constrain the focal depths of moderate‐sized events ( M ≥ 4.0) in this sequence. We first determine the absolute earthquake depth by modeling the regional depth phases at high frequencies (~1 Hz). We mainly focus on Pn and its depth phases pPn and sPn , which arrive early at regional distance and are less contaminated by crustal multiples. To facilitate depth phase identification and to improve signal‐to‐noise ratio, we take advantage of the dense Southern California Seismic Network and use array analysis to align and stack Pn waveforms. For events without clear depth phases, we further determine their relative depths with respect to those with known depths using differential travel times of the Pn , direct P , and direct S phases recorded for event pairs. Focal depths of 93 out of 122 M ≥ 4.0 events are tightly constrained with absolute uncertainty of about 1 km. Aftershocks are clustered in the depth range of 3–10 km, suggesting a relatively shallow seismogenic zone, consistent with high surface heat flow in this region. Most aftershocks are located outside or near the lower terminus of coseismic high‐slip patches of the main shock, which may be governed by residual strains, local stress concentration, or postseismic slip.

Baja California↗

USGS1957

The application, technique, and theory of Gish-Rooney instruments, methods, and interpretation in electrical resistivity measurements

The foundations of electrical prospecting were laid by Fox (1830) and Barus (1882). The former discovered that electrical currents and potentials were developed by certain ore deposits in Cornwall, England. Fox made measurements of these potentials and determined the resistivities of the minerals and surrounding rocks also. The latter, invented the non-polarizing electrode with which he overcame the polarizing effects of direct current, and was able to trace and extend the Comstock lode. According to Slichter (1934, p.234), F. Neumann proposed as early as 1884 determining the resistivity of the earth by a four-electrode method nearly like our present technique, and carefully developed the mathematical theory of the method. Wells (1914) followed the work of Barus with studies of the electric activity in ore deposits. Ambronn (1926) gives an extensive bibliography of the early work in geophysics. The classical work of Wenner (1917) and, almost at the same time and independently, that of Schlumberger (1920) laid the foundations for resistivity measurements on the surface of the earth. While Schlumberger was actually making measurements of earth resistivity related to structural studies as early as 1912 in France, work in this country was slow in developing from the work of Wenner, but it was gaining adherents following the pioneering work of Kelley (1922) and Gish (1923). Probably the work of Gish and Rooney (1925) Who redesigned the apparatus of McCollum (1925) was the largest contributing cause in this country for the sudden interest and expansion of electrical methods. Their work was followed by many others in the late 1920's, some of which are: Gish (1926); Rooney and Gish (1927); Rooney (1927); Gish and Rooney (1927); Lee (1928); Hotchkiss, Rooney, and Fisher (1929); Weaver (1929); Lundberg (1929); Leonardon and. Kelley (1929); Crosby and Leonardon (1929); Carretta and Kelly (1929); Koenigsberger (1929}; Runkel (1928, 1929); Heiland (1929); and many others.

Open-File Report↗

USGS2011

Investigation of the potential for concealed base-metal mineralization at the Drenchwater Creek Zn-Pb-Ag occurrence, northern Alaska, using geology, reconnaissance geochemistry, and airborne electromagnetic geophysics

In 2005, the U.S. Geological Survey, Bureau of Land Management, and State of Alaska cooperated on an investigation of the mineral potential of a southern part of the National Petroleum Reserve in Alaska, Howard Pass quadrangle, to provide background information for future land-use decisions. The investigation incorporated an airborne electromagnetic (EM) survey covering 1,500 mi 2 (~3,900 km 2 ), including flight lines directly over the Drenchwater Creek sediment-hosted Zn-Pb-Ag occurrence, the largest known base-metal occurrence in the survey area. Samples from the mineralized outcrop and rubblecrop contain metal concentrations that can exceed 11 percent Zn+Pb, with appreciable amounts of Ag. Soil samples with anomalous Pb concentrations are distributed near the sulfide-bearing outcrops and along a >2.5 km zone comprising mudstone, shale, and volcanic rocks of the Kuna Formation. No drilling has taken place at the Drenchwater occurrence, so alternative data sources (for example, geophysics) are especially important in assessing possible indicators of mineralization. Data from the 2005 electromagnetic survey define the geophysical character of the rocks at Drenchwater and, in combination with geological and surface-geochemical data, can aid in assessing the possible shallow (up to about 50 m), subsurface lateral extent of base-metal sulfide accumulations at Drenchwater. A distinct >3-km-long electromagnetic conductive zone (observed in apparent resistivity maps) coincides with, and extends further westward than, mineralized shale outcrops and soils anomalously high in Pb concentrations within the Kuna Formation; this conductive zone may indicate sulfide-rich rock. Models of electrical resistivity with depth, generated from inversion of electromagnetic data, which provide alongflight-line conductivity-depth profiles to between 25 and 50 m below ground surface, show that the shallow subsurface conductive zone occurs in areas of known mineralized outcrops and thins to the east. Broader, more conductive rock along the western ~1 km of the geophysical anomaly does not reach ground surface. These data suggest that the Drenchwater deposit is more extensive than previously thought. The application of inversion modeling also was applied to another smaller geochemical anomaly in the Twistem Creek area. The results are inconclusive, but they suggest that there may be a local conductive zone, possibly due to sulfides.

Professional Paper↗

USGS2018

Airborne electromagnetic imaging of permafrost for hydrologic and infrastructure studies

Permafrost is found throughout northern latitudes, and has far reaching implications for natural and man - made environments including hydrologic processes, landscape dynamics, ecosystems, and infrastructure. While maps of near - surface permafrost characteristics are available, relatively little is known about permafrost distributions at depth over large areas. Her e, we summarize several frequency domain airborne electromagnetic (AEM) surveys acquired within interior Alaska from 2006 – 2016 that were collected to improve understand ing of permafrost and geological controls on hydrologic processes and infrastructure. Results of the AEM surveys are supported by both hydrogeophysical numerical models and ground - based geophysical observations.

Alaska↗