USGS Science⌕ Search

SEARCH · USGS Science

Results for “Journal of Geophysical Research, Earth Surface”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16Linked to original sources

Assessment of Mars Pathfinder landing site predictions

Remote sensing data at scales of kilometers and an Earth analog were used to accurately predict the characteristics of the Mars Pathfinder landing site at a scale of meters. The surface surrounding the Mars Pathfinder lander in Ares Vallis appears consistent with orbital interpretations, namely, that it would be a rocky plain composed of materials deposited by catastrophic floods. The surface and observed maximum clast size appears similar to predictions based on an analogous surface of the Ephrata Fan in the Channeled Scabland of Washington state. The elevation of the site measured by relatively small footprint delay-Doppler radar is within 100 m of that determined by two-way ranging and Doppler tracking of the spacecraft. The nearly equal elevations of the Mars Pathfinder and Viking Lander 1 sites allowed a prediction of the atmospheric conditions with altitude (pressure, temperature, and winds) that were well within the entry, descent, and landing design margins. High-resolution (~38 m/pixel) Viking Orbiter 1 images showed a sparsely cratered surface with small knobs with relatively low slopes, consistent with observations of these features from the lander. Measured rock abundance is within 10% of that expected from Viking orbiter thermal observations and models. The fractional area covered by large, potentially hazardous rocks observed is similar to that estimated from model rock distributions based on data from the Viking landing sites, Earth analog sites, and total rock abundance. The bulk and fine-component thermal inertias measured from orbit are similar to those calculated from the observed rock size-frequency distribution. A simple radar echo model based on the reflectivity of the soil (estimated from its bulk density), and the measured fraction of area covered by rocks was used to approximate the quasi-specular and diffuse components of the Earth-based radar echos. Color and albedo orbiter data were used to predict the relatively dust free or unweathered surface around the Pathfinder lander compared to the Viking landing sites. Comparisons with the experiences of selecting the Viking landing sites demonstrate the enormous benefit the Viking data and its analyses and models had on the successful predictions of the Pathfinder site. The Pathfinder experience demonstrates that, in certain locations, geologic processes observed in orbiter data can be used to infer surface characteristics where those processes dominate over other processes affecting the Martian surface layer. Copyright 1999 by the American Geophysical Union.

Journal of Geophysical Research E: Planets↗

The roles of time and displacement in velocity-dependent volumetric strain of fault zones

The relationship between measured friction μ A and volumetric strain during frictional sliding was determined using a rate and state variable dependent friction constitutive equation, a common work balance relating friction and volume change, and two types of experimental faults: initially bare surfaces of Westerly granite and rock surfaces separated by a 1 mm layer of less than 90 μm Westerly granite gouge. The constitutive equation is the sum of a constant term representing the nominal resistance to sliding and two smaller terms: a rate dependent term representing the shear viscosity of the fault surface (direct effect), and a term which represents variations in the area of contact (evolution effect). The work balance relationship requires that μ A differs from the frictional resistance that leads to shear heating by the derivative of fault normal displacement with respect shear displacement, d δ n / d δ s . An implication of this relationship is that the rate dependence of d δ n / d δ s contributes to the rate dependence of μ A . Experiments show changes in sliding velocity lead to changes in both fault strength and volume. Analysis of data with the rate and state equations combined with the work balance relationship preclude the conventional interpretation of the direct effect in the rate and state variable constitutive equations. Consideration of a model bare surface fault consisting of an undeformable indentor sliding on a deformable surface reveals a serious flaw in the work balance relationship if volume change is time-dependent. For the model, at zero slip rate indentation creep under the normal load leads to time-dependent strengthening of the fault surface but, according to the work balance relationship, no work is done because compaction or dilatancy can only be induced by shearing. Additional tests on initially bare surfaces and gouges show that fault normal strain in experiments is time-dependent, consistent with the model. This time-dependent fault normal strain, which is not accounted for in the work balance relationship, explains the inconsistency between the constitutive equations and the work balance. For initially bare surface faults, all rate dependence of volume change is due to time dependence. Similar results are found for gouge. We conclude that μ A reflects the frictional resistance that results in shear heating, and no correction needs to be made for the volume changes. The result that time-dependent volume changes do not contribute to μ A is a general result and extends beyond these experiments, the simple indentor model and particular constitutive equations used to illustrate the principle.

Journal of Geophysical Research B: Solid Earth↗

Geology of the Mount St. Helens area: Record of discontinuous volcanic and plutonic activity in the Cascade Arc of southern Washington

The Quaternary edifice of Mount St. Helens volcano was built upon a deeply eroded terrane of gently folded and altered volcanic and plutonic rocks that represent the core of the Tertiary Cascade magmatic arc. These rocks constitute an east dipping homoclinal sequence, several kilometers thick, of subaerially erupted mafic to silicic flows and volcaniclastic strata; K‐Ar ages from this section range from about 28 to 23 Ma (late Oligocene and earliest Miocene), which corresponds to an apparent lull in Cascade volcanism to the north of Mount Rainier. Volcanism was essentially continuous during this period of time, and neither a well‐defined base nor top of the section is exposed within the mapped area. Basalt and basaltic andesite dominate the lower part of the mid‐Tertiary section, whereas andesitic and dacitic rocks comprise most of the upper part. This section was intruded by numerous mafic to silicic dikes, sills, and irregular plutonic bodies, most no more than a few million years younger than their host rocks, and subjected to pervasive burial metamorphism and widespread hydrothermal alteration. Large areas of hornfelsed rock surrounding even relatively small intrusions indicate that the proportion of plutonic rock becomes significantly greater at shallow depth beneath the existing erosion surface. A large granitic pluton intruded the mid‐Tertiary section north of Spirit Lake at about 21 Ma. The Earl porphyry copper deposit occurs within the pluton but appears too young (17 Ma) to be genetically related to it. In contrast to the rather continuous and voluminous Oligocene to early Miocene activity, volcanism since then in the Mount St. Helens area has been localized and Volumetrically minor. Products of three younger eruptive periods have been recognized: a sequence of 15 m.y. old pyroxene andesite flows resting unconformably on mid‐Tertiary strata south of Mount St. Helens, widespread shallow dikes and sills of pyroxene andesite between 10 and 8 m.y. old, and compositionally diverse rocks erupted during the past 3 m.y. The Quaternary lavas are more potassic than the Tertiary lavas and typically contain phenocrysts of hornblende and biotite, which are absent from the older rocks. A number of Tertiary structures define a broad NNE trending zone that may reflect a deep‐seated lithospheric flaw that has controlled the locus of Cascade magmatism in southern Washington for the past 25 m.y. Mount St. Helens lies within this zone at the intersection of the NNW striking St. Helens seismic zone (SHZ) and an ENE trending alignment of Pleistocene silicic plug‐domes. No surface breakage has been detected along the SHZ, which is apparently very young. The linear zone of silicic vents is probably controlled by a fault that has been interpreted from seismic records to occur directly beneath the volcano. This zone parallels the directions of regional maximum horizontal compressive stress and North America/Juan de Fuca plate convergence. Mount St. Helens is an example of a low‐volume tectonically controlled magmatic system in an early stage of development.

Washington↗

Quantifying uncertainty in cumulative surface slip along the Cucamonga Fault, a crustal thrust fault in southern California

Studies of historic earthquake ground surface ruptures show that displacements along strike are spatially variable. As a result, latest Quaternary slip rates developed from a spatially restricted set of cumulative displacement measurements may not accurately represent fault velocity. Here we examine the uncertainties associated with slip on the Cucamonga Fault, which is part of a network of faults that have generated damaging historical earthquakes in and around Los Angeles, California. Numerous scarps along its ~25‐km length are well expressed on alluvial fans. We make 310 measurements of vertical separation across the scarps using lidar data. We show that the dispersion of the vertical separations cannot be explained by our best estimates of analytical uncertainties alone. Additional epistemic uncertainties are required. We find that the magnitude of the required epistemic uncertainty is typically larger than analytical uncertainty by a factor of 3 and typically about 22% of the maximum vertical separation. These relationships appear to hold at several spatial scales. We examine three potential sources of epistemic uncertainty and find that none among surface age uncertainty, fault dip, and anthropogenic landscape alteration is likely sufficient to explain the overdispersion of the data, which suggests differences in cumulative strain along the strike of the fault. We calculate a range of dip‐slip rates between 0.4 and 2.6 mm/year. In light of our results, we suggest that future thrust‐fault slip‐rate studies adopt an epistemic uncertainty of 22% of the maximum value for vertical separation measurements, unless there are sufficient data to demonstrate otherwise.

California↗

Experimental deformation of topaz crystals: Possible embrittlement by intracrystalline water

Crystallographically oriented single‐crystal prisms of gem quality topaz (composition AlSiO (OH− F) where x = 0.04 ± 0.01) were deformed at a confining pressure of 1.50 GPa, a temperature of 800°C, and a strain rate of 2×10 s. Under nearly identical conditions, all crystals of anhydrous rock‐forming minerals that have been tested to date, such as olivine, quartz, feldspars, pyroxenes, and refractory oxides, deform plastically; in contrast, our topaz crystals failed by brittle fracture regardless of the orientation of the compression direction. No optical evidence for plastic deformation was detected. Another suite of experiments with compression perpendicular to the (001) cleavage at = 100°–950°C and a strain rate of 2×10 s displayed two regimes of behavior: (1) at >400°C, fracture strength was independent of temperature, and fracture occurred on one or two surfaces parallel to {103}; (2) at <400°C, the fracture strength increased rapidly with decreasing temperature, no macroscopic stress drop was observed, and many closely spaced conjugate fractures formed on (103) and (103). The anomalous brittleness of topaz compared to anhydrous silicate and oxide crystals indicates that intracrystalline “water” plays a role in the embrittlement. We suggest that water within the topaz crystals promotes fracture in ways similar to the mechanisms of slow crack growth aided by environmental moisture.

Journal of Geophysical Research B: Solid Earth↗

Observations of periglacial landforms in Utopia Planitia with the High Resolution Imaging Science Experiment (HiRISE)

The region of western Utopia Planitia (80-105 degreesE, 40-55 degrees N) displays several types of landforms similar to Earth periglacial features, including scallop-shaped depressions and networks of polygonal terrains. The scalloped depressions have been proposed to originate from thermokarstic processes such as sublimation and/or melting of near-surface ground ice. Using HiRISE imagery, we characterize these depressions and several associated, distinct polygon networks in unprecedented morphologic and topographic detail and investigate support for an ice-based degradation process. The scalloped depressions and interior polygons and ridges are found to evolve together, mainly influenced by sublimation, local proximity of ground ice to the surface, and obliquity variations.

Journal of Geophysical Research↗

Tracking magma volume recovery at Okmok Volcano using GPS and an unscented kalman filter

Changes beneath a volcano can be observed through position changes in a GPS network, but distinguishing the source of site motion is not always straightforward. The records of continuous GPS sites provide a favorable data set for tracking magma migration. Dense campaign observations usually provide a better spatial picture of the overall deformation field, at the expense of an episodic temporal record. Combining these observations provides the best of both worlds. A Kalman filter provides a means for integrating discrete and continuous measurements and for interpreting subtle signals. The unscented Kalman filter (UKF) is a nonlinear method for time‐dependent observations. We demonstrate the application of this technique to deformation data by applying it to GPS data collected at Okmok volcano. Seven years of GPS observations at Okmok are analyzed using a Mogi source model and the UKF. The deformation source at Okmok is relatively stable at 2.5 km depth below sea level, located beneath the center of the caldera, which means the surface deformation is caused by changes in the strength of the source. During the 7 years of GPS observations more than 0.5 m of uplift has occurred, a majority of that during the time period January 2003 to July 2004. The total volume recovery at Okmok since the last eruption in 1997 is ∼60–80%. The UKF allows us to solve simultaneously for the time‐dependence of the source strength and for the location without a priori information about the source. 2009 by the American Geophysical Union.

Alaska↗

Changes in seismic velocity during the first 14 months of the 2004–2008 eruption of Mount St. Helens, Washington

Mount St. Helens began erupting in late 2004 following an 18&thinsp;year quiescence. Swarms of repeating earthquakes accompanied the extrusion of a mostly solid dacite dome over the next 4&thinsp;years. In some cases the waveforms from these earthquakes evolved slowly, likely reflecting changes in the properties of the volcano that affect seismic wave propagation. We use coda-wave interferometry to quantify small changes in seismic velocity structure (usually <1%) between two similar earthquakes and employed waveforms from several hundred families of repeating earthquakes together to create a continuous function of velocity change observed at permanent stations operated within 20&thinsp;km of the volcano. The high rate of earthquakes allowed tracking of velocity changes on an hourly time scale. Changes in velocity were largest near the newly extruding dome and likely related to shallow deformation as magma first worked its way to the surface. We found strong correlation between velocity changes and the inverse of real-time seismic amplitude measurements during the first 3&thinsp;weeks of activity, suggesting that fluctuations of pressure in the shallow subsurface may have driven both seismicity and velocity changes. Velocity changes during the remainder of the eruption likely result from a complex interplay of multiple effects and are not well explained by any single factor alone, highlighting the need for complementary geophysical data when interpreting velocity changes.

Journal of Geophysical Research B: Solid Earth↗

The U-tube: A novel system for acquiring borehole fluid samples from a deep geologic CO2 sequestration experiment

A novel system has been deployed to obtain geochemical samples of water and gas, at in situ pressure, during a geologic CO 2 sequestration experiment conducted in the Frio brine aquifer in Liberty County, Texas. Project goals required high-frequency recovery of representative and uncontaminated aliquots of a rapidly changing two-phase fluid (supercritical CO 2 and brine) fluid from 1.5 km depth. The data sets collected, using both the liquid and gas portions of the downhole samples, provide insights into the coupled hydrogeochemical issues affecting CO 2 sequestration in brine-filled formations. While the basic premise underlying the U-tube sampler is not new, the system is unique because careful consideration was given to the processing of the recovered two-phase fluids. In particular, strain gauges mounted beneath the high-pressure surface sample cylinders measured the ratio of recovered brine to supercritical CO 2 . A quadrupole mass spectrometer provided real-time gas analysis for perfluorocarbon and noble gas tracers that were injected along with the CO 2 . The U-tube successfully acquired frequent samples, facilitating accurate delineation of the arrival of the CO 2 plume, and on-site analysis revealed rapid changes in geochemical conditions.

Journal of Geophysical Research Solid Earth↗

Analysis of fractures intersecting Kahi Puka Well 1 and its relation to the growth of the island of Hawaii

As part of the Hawaii Scientific Drilling Project, Kahi Puka Well 1 penetrated about 275 m of Mauna Loa basalts overlying a sequence of Mauna Kea flow units as it was drilled and cored to a total depth of 1053 m below land surface. A borehole televiewer (BHTV) was run in most of the well in successive stages prior to casing in order to obtain magnetically oriented acoustic images of the borehole wall. A total of 283 individual fractures were identified from this log and characterized in terms of strike and dip. These data are divided into three vertical sections based upon age and volcanic source, and lower hemisphere stereographic plots identify two predominant, subparallel fracture subsets common to each section. Assuming that most of the steeply dipping fractures observed in the BHTV log are tensile features generated within basalt flows during deposition and cooling, this fracture information can be combined with models of the evolution of the island of Hawaii to investigate the depositional history of these Mauna Loa and Mauna Kea basalts over the past 400 kyr. The directions of high-angle fractures appear to be generally parallel to topography or to the coastline at the time of deposition, as is supported by surface mapping of modern flows. Consequently, an overall counterclockwise rotation of about 75?? in the strike of these fractures from the bottom to the top of the well represents a systematic change in depositional slope direction over time. We attribute the observed rotation in the orientations of the two predominant fracture subsets over the past 400 kyr to changes in the configurations of volcanic sources during shield building and to the structural interference of adjacent volcanoes that produces shifts in topographic patterns.

Journal of Geophysical Research B: Solid Earth↗

Combining multiphase groundwater flow and slope stability models to assess stratovolcano flank collapse in the Cascade Range

Hydrothermal alteration can create low‐permeability zones, potentially resulting in elevated pore‐fluid pressures, within a volcanic edifice. Strength reduction by rock alteration and high pore‐fluid pressures have been suggested as a mechanism for edifice flank instability. Here we combine numerical models of multiphase heat transport and groundwater flow with a slope‐stability code that incorporates three‐dimensional distributions of strength and pore‐water pressure to address the following questions: (1) What permeability distributions and contrasts produce elevated pore‐fluid pressures in a stratovolcano? (2) What are the effects of these elevated pressures on flank stability? (3) Finally, what are the effects of magma intrusion on potential flank failure in an edifice? Simulation results show that under a range of plausible parameters, water tables in a stratovolcano can be elevated or perched. These elevated water tables result in universally lower stability (lower factor of safety) compared with equivalent dry edifices, indicating a higher likelihood of flank collapse. Low‐permeability (<1 × 10 −17 m 2 ) layers such as altered pyroclastic deposits or breccias can result in locally saturated regions (perched water) and lower factors of safety near the ground surface but may actually reduce liquid water saturation and pore pressures in the core of the edifice and thus may favor small, shallow collapses over larger, deeper collapses. Magma intrusion into the base of the edifice increases pore‐fluid pressures and decreases the factor of safety. However, the shear strength of edifice rocks also exerts a significant control on stability, so both mechanical properties and pore‐fluid pressures are important for stability assessments.

Washington↗

Viscoelastic shear zone model of a strike-slip earthquake cycle

I examine the behavior of a two-dimensional (2-D) strike-slip fault system embedded in a 1-D elastic layer (schizosphere) overlying a uniform viscoelastic half-space (plastosphere) and within the boundaries of a finite width shear zone. The viscoelastic coupling model of Savage and Prescott [1978] considers the viscoelastic response of this system, in the absence of the shear zone boundaries, to an earthquake occurring within the upper elastic layer, steady slip beneath a prescribed depth, and the superposition of the responses of multiple earthquakes with characteristic slip occurring at regular intervals. So formulated, the viscoelastic coupling model predicts that sufficiently long after initiation of the system, (1) average fault-parallel velocity at any point is the average slip rate of that side of the fault and (2) far-field velocities equal the same constant rate. Because of the sensitivity to the mechanical properties of the schizosphere-plastosphere system (i.e., elastic layer thickness, plastosphere viscosity), this model has been used to infer such properties from measurements of interseismic velocity. Such inferences exploit the predicted behavior at a known time within the earthquake cycle. By modifying the viscoelastic coupling model to satisfy the additional constraint that the absolute velocity at prescribed shear zone boundaries is constant, I find that even though the time-averaged behavior remains the same, the spatiotemporal pattern of surface deformation (particularly its temporal variation within an earthquake cycle) is markedly different from that predicted by the conventional viscoelastic coupling model. These differences are magnified as plastosphere viscosity is reduced or as the recurrence interval of periodic earthquakes is lengthened. Application to the interseismic velocity field along the Mojave section of the San Andreas fault suggests that the region behaves mechanically like a ???600-km-wide shear zone accommodating 50 mm/yr fault-parallel motion distributed between the San Andreas fault system and Eastern California Shear Zone. Copyright 2001 by the American Geophysical Union.

California↗

Interseismic ground deformation and fault slip rates in the greater San Francisco Bay Area from two decades of space geodetic data

The detailed spatial variations of strain accumulation and creep on major faults in the northern San Francisco Bay Area (North Bay), which are important for seismic potential and evaluation of natural hazards, remain poorly understood. Here we combine interferometric synthetic aperture radar data from the ERS‐1/2 and Envisat satellites between 1992 and 2010 with continuous and campaign GPS data to obtain a high spatial and temporal coverage of ground deformation of the North Bay. The SAR data from both ascending and descending orbits are combined to separate horizontal and vertical components of the deformation. We jointly invert the horizontal component of the mean velocities derived from these data to infer the deep strike‐slip rates on major locked faults. We use the estimated deep rates to simulate the long‐wavelength deformation due to interseismic elastic strain accumulation along these locked faults. After removing the long‐wavelength signal from the InSAR horizontal mean velocity field, we estimate fault‐parallel surface creep rates of up to 2 mm/year along the central section of the Rodgers Creek fault and surface creep rates ranging between 2 and 4 mm/year along the Concord fault. No surface creep is geodetically resolved along the West Napa and Green Valley fault zones. We identified characteristically repeating earthquakes on the Rodgers Creek fault, the West Napa fault, the Green Valley fault, and the Concord fault. Nontectonic deformation in the Geysers geothermal field and in Late Cenozoic basins (Rohnert Park and Sonoma basins) are also observed, likely due to hydrological and sediment‐compaction processes, respectively.

Journal of Geophysical Research B: Solid Earth↗

The 1979 Homestead Valley earthquake sequence, California: Control of aftershocks and postseismic deformation

The coseismic slip and geometry of the March 15, 1979, Homestead Valley, California, earthquake sequence are well constrained by precise horizontal and vertical geodetic observations and by data from a dense local seismic network. These observations indicate 0.52±0.10 m of right-lateral slip and 0.17±0.04 m of reverse slip on a buried vertical 6-km-long and 5-km-deep fault and yield a mean static stress drop of 7.2±1.3 MPa. The largest shock had M S = 5.6. Observations of the ground rupture revealed up to 0.1 m of right-lateral slip on two mapped faults that are subparallel to the modeled seismic slip plane. In the 1.9 years since the earthquakes, geodetic network displacements indicate that an additional 60±10 mm of postseismic creep took place. The rate of postseismic shear strain (0.53±0.13 μrad/yr) measured within a 30×30-km network centered on the principal events was anomalously high compared to its preearthquake value and the postseismic rate in the adjacent network. This transient cannot be explained by postseismic slip on the seismic fault but rather indicates that broadscale release of strain followed the earthquake sequence. We have calculated the postearthquake stress field caused by the modeled coseismic slip. We assume that failure is promoted when the sum of the shear stress plus 0.75 times the faultopening stress increases. Most aftershocks concentrate at points where the stresses are enhanced by 0.3 MPa (3 bars) or more; aftershocks are nearly absent where postearthquake stresses decrease by 0.3–0.5 MPa. Isolated off-fault clusters of aftershocks that locate at one fault length from the rupture plane are explainable by this hypothesis. We find that ground rupture and postseismic creep take place where near-surface stresses are calculated to increase within the preexisting fault zones. Two patches that extend 4 km from both ends of the seismic fault exhibited neither aftershocks nor measurable postseismic creep. The sensitivity of aftershocks and ground rupture to changes in stress that are less than 5% of the earthquake stress drop demonstrates that the region around the earthquakes was within a few percent of its failure threshold before the main shocks. The preearthquake stress field and the stress required for failure must also have been nearly uniform.

Journal of Geophysical Research Solid Earth↗

Earthquake-by-earthquake fold growth above the Puente Hills blind thrust fault, Los Angeles, California: Implications for fold kinematics and seismic hazard

Boreholes and high-resolution seismic reflection data collected across the forelimb growth triangle above the central segment of the Puente Hills thrust fault (PHT) beneath Los Angeles, California, provide a detailed record of incremental fold growth during large earthquakes on this major blind thrust fault. These data document fold growth within a discrete kink band that narrows upward from ???460 m at the base of the Quaternary section (200-250 m depth) to <150 m at 2.5 m depth, with most growth during the most recent folding event occurring within a zone only ???60 m wide. These observations, coupled with evidence from petroleum industry seismic reflection data, demonstrate that most (>82% at 250 m depth) folding and uplift occur within discrete kink bands, thereby enabling us to develop a paleoseismic history of the underlying blind thrust fault. The borehole data reveal that the youngest part of the growth triangle in the uppermost 20 m comprises three stratigraphically discrete growth intervals marked by southward thickening sedimentary strata that are separated by intervals in which sediments do not change thickness across the site. We interpret the intervals of growth as occurring after the formation of now-buried paleofold scarps during three large PHT earthquakes in the past 8 kyr. The intervening intervals of no growth record periods of structural quiescence and deposition at the regional, near-horizontal stream gradient at the study site. Minimum uplift in each of the scarp-forming events, which occurred at 0.2-2.2 ka (event Y), 3.0-6.3 ka (event X), and 6.6-8.1 ka (event W), ranged from ???1.1 to ???1.6 m, indicating minimum thrust displacements of ???2.5 to 4.5 m. Such large displacements are consistent with the occurrence of large-magnitude earthquakes (Mw > 7). Cumulative, minimum uplift in the past three events was 3.3 to 4.7 m, suggesting cumulative thrust displacement of ???7 to 10.5 m. These values yield a minimum Holocene slip rate for the PHT of ???0.9 to 1.6 mm/yr. The borehole and seismic reflection data demonstrate that dip within the kink band is acquired incrementally, such that older strata that have been deformed by more earthquakes dip more steeply than younger strata. Specifically, strata dip 0.4?? at 4 m depth, 0.7?? at 20 m depth, 8?? at 90 m, 16?? at 110 m, and 17?? at 200 m. Moreover, structural restorations of the borehole data show that the locus of active folding (the anticlinal active axial surface) does not extend to the surface in exactly the same location from earthquake to earthquake. Rather, that the axial surfaces migrate from earthquake to earthquake, reflecting a component of fold growth by kink band migration. The incremental acquisition of bed dip in the growth triangle may reflect some combination of fold growth by limb rotation in addition to kink band migration, possibly through a component of trishear or shear fault bend folding. Alternatively, the component of limb rotation may result from curved hinge fault bend folding, and/or the mechanical response of loosely consolidated granular sediments in the shallow subsurface to folding at depth. Copyright 2007 by the American Geophysical Union.

Journal of Geophysical Research B: Solid Earth↗

Analysis of time series of glacier speed: Columbia Glacier, Alaska

During the summers of 1984 and 1985, laser measurements were made of the distance from a reference location to markers on the surface of the lower reach of Columbia Glacier, Alaska. The data have numerous gaps, mostly because of inclement weather. The laser measurements were corrected for variations in atmospheric temperature and pressure and for the trajectory of the marker. The marker speed was calculated by using a combination of cubic splines and digital filters to arrive at a data set with 1-hour time intervals. The speed varies from 7 to 15 m/d and has three noteworthy components: (1) a low-frequency perturbation in speed with a time scale of days related to increased precipitation, (2) semidiurnal and diurnal variations related to sea tides, and (3) diurnal variations related to glacier surface melt. The low frequency and tidal period variations are separated by low-pass filtering and subtracting the filtered data from the original data. The variations from melt runoff and tides have the same frequency range and are examined using harmonic analysis and multiple regression with the various forcing functions. The high-frequency portion of the ice speed signal is dominated by tidal influences and to a lesser extent by meltwater influences. The low-frequency portion of the signal is dominated by the effects of precipitation.

Journal of Geophysical Research Solid Earth↗

Venus cartography

The entire surface of the planet Venus is being mapped at global and regional scales (1:50,000,000 through 1:1,500,000) with synthetic aperture radar (SAR), radar altimeter, and radiometer measurements of physical properties from the Magellan spacecraft. The mapping includes SAR image mosaics, shaded relief maps, and topographic contour overlays made from altimetry data and by radargrammetric methods. Methods used include new techniques of radar image processing that became operational as a result of the Magellan mission. The area being mapped (at a resolution of 75 m/pixel) is roughly equivalent to that of Earth, including seafloors. The mapping is designed to support geologic and geophysical investigations.

Journal of Geophysical Research E: Planets↗

Integrating puffing and explosions in a general scheme for Strombolian-style activity

Strombolian eruptions are among the most common subaerial styles of explosive volcanism worldwide. Distinctive features of each volcano lead to a correspondingly wide range of variations of magnitude and erupted products, but most papers focus on a single type of event at a single volcano. Here, in order to emphasize the common features underlying this diversity of styles, we scrutinize a database from 35 different erupting vents, including 21 thermal infrared videos from Stromboli (Italy), Etna (Italy), Yasur (Vanuatu), and Batu Tara (Indonesia), from puffing, through rapid explosions to normal explosions, with variable ejection parameters and relative abundance of gas, ash, and bombs. Using field observations and high-speed thermal infrared videos processed by a new algorithm, we identify the distinguishing characteristics of each type of activity and how they may relate and interact. In particular, we record that ash-poor normal explosions may be preceded and followed by the onset or the increase of the puffing activity, while ash-rich explosions are emergent, i.e., with inflation of the free surface followed directly by emission of increasingly large gas pockets. Overall, we see that all Strombolian activities form a continuum arising from a common mechanism and are modulated by the combination of two well-established controls: (1) the length of the bursting gas pocket with respect to the vent diameter and (2) the presence and thickness of a high-viscosity layer in the uppermost part of the volcanic conduit.

Journal of Geophysical Research B: Solid Earth↗