SEARCH · USGS Science

Results for “Earth and Space Science”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16Linked to original sources

USGS2013

EAARL coastal topography and imagery–Western Louisiana, post-Hurricane Rita, 2005: First surface

These remotely sensed, geographically referenced color-infrared (CIR) imagery and elevation measurements of lidar-derived first-surface (FS) topography datasets were produced by the U.S. Geological Survey (USGS), St. Petersburg Coastal and Marine Science Center, St. Petersburg, Florida, and the National Aeronautics and Space Administration (NASA), Wallops Flight Facility, Virginia. This project provides highly detailed and accurate datasets of a portion of the Louisiana coastline beachface, acquired post-Hurricane Rita on September 27-28 and October 2, 2005. The datasets are made available for use as a management tool to research scientists and natural-resource managers. An innovative airborne lidar instrument originally developed at the National Aeronautics and Space Administration (NASA) Wallops Flight Facility, and known as the Experimental Advanced Airborne Research Lidar (EAARL), was used during data acquisition. The EAARL system is a raster-scanning, waveform-resolving, green-wavelength (532-nanometer) lidar designed to map near-shore bathymetry, topography, and vegetation structure simultaneously. The EAARL sensor suite includes the raster-scanning, water-penetrating full-waveform adaptive lidar, a down-looking red-green-blue (RGB) digital camera, a high-resolution multispectral color-infrared (CIR) camera, two precision dual-frequency kinematic carrier-phase GPS receivers, and an integrated miniature digital inertial measurement unit, which provide for sub-meter georeferencing of each laser sample. The nominal EAARL platform is a twin-engine Cessna 310 aircraft, but the instrument may be deployed on a range of light aircraft. A single pilot, a lidar operator, and a data analyst constitute the crew for most survey operations. This sensor has the potential to make significant contributions in measuring sub-aerial and submarine coastal topography within cross-environmental surveys. Elevation measurements were collected over the survey area using the EAARL system, and the resulting data were then processed using the Airborne Lidar Processing System (ALPS), a custom-built processing system developed in a NASA-USGS collaboration. ALPS supports the exploration and processing of lidar data in an interactive or batch mode. Modules for presurvey flight-line definition, flight-path plotting, lidar raster and waveform investigation, and digital camera image playback have been developed. Processing algorithms have been developed to extract the range to the first and last significant return within each waveform. ALPS is used routinely to create maps that represent submerged or sub-aerial topography. Specialized filtering algorithms have been implemented to determine the "bare earth" under vegetation from a point cloud of last return elevations. For more information about similar projects, please visit the Lidar for Science and Resource Management Website.

Louisiana↗

USGS2025

Unlocking ecological insights from sub-seasonal visible-to-shortwave infrared imaging spectroscopy: The SHIFT campaign

We stand at the threshold of a transformative era in Earth observation, marked by space-borne visible-to-shortwave infrared (VSWIR) imaging spectrometers that promise consistent global observations of ecosystem function, phenology, and inter- and intra-annual change. However, the full value of repeat spectroscopy, the information embedded within different temporal scales, and the reliability of existing algorithms across diverse ecosystem types and vegetation phenophases have remained elusive due to the absence of suitable sub-seasonal spectroscopy data. In response, the Surface Biology and Geology (SBG) High-Frequency Time Series (SHIFT) campaign was initiated during late February 2022 in Santa Barbara County, California. SHIFT, designed to support NASA's SBG mission, addressed mission scoping, scientific advancement, applications development, and community building. This ambitious endeavor included weekly Airborne Visible InfraRed Imaging Spectrometer-Next Generation (AVIRIS-NG) imagery acquisitions for 13 weeks (spanning February 24 to May 29, 2022), accompanied by coordinated terrestrial vegetation and coastal aquatic data collection. We describe the rich datasets collected and illustrate how the complex sub-seasonal patterns of change can be linked to biological science and applications, surpassing insights from multispectral observations. Leveraging open-source processing methods and cloud-based analysis tools, the SHIFT campaign showcases the readiness of the scientific community to harness ecological insights from remotely sensed hyperspectral time series. We provide an overview of SHIFT's goals, data collections, preliminary results, and the collaborative efforts of early career scientists committed to unlocking the transformative potential of high-frequency time series data from space-borne VSWIR imaging spectrometers.

Ecosphere↗

USGS2023

ECCOE Landsat quarterly Calibration and Validation report—Quarter 2, 2023

Executive Summary The U.S. Geological Survey Earth Resources Observation and Science Calibration and Validation (Cal/Val) Center of Excellence (ECCOE) focuses on improving the accuracy, precision, calibration, and product quality of remote-sensing data, leveraging years of multiscale optical system geometric and radiometric calibration and characterization experience. The ECCOE Landsat Cal/Val Team continually monitors the geometric and radiometric performance of active Landsat missions and makes calibration adjustments, as needed, to maintain data quality at the highest level. This report provides observed geometric and radiometric analysis results for Landsats 7–8 for quarter 2 (April–June) of 2023. All data used to compile the Cal/Val analysis results presented in this report are freely available from the U.S. Geological Survey EarthExplorer website: https://earthexplorer.usgs.gov . One specific activity that the ECCOE Landsat Cal/Val Team closely monitored was a Landsat 8 Thermal Infrared Sensor (TIRS) Scene Select Mechanism (SSM) excursion anomaly. On April 21, 2023, a TIRS SSM excursion error flag was indicated in telemetry during a calibration activity when the SSM encoder was powered on and the mirror was between the nadir position and the deep space position. An initial recovery plan indicated the SSM was moving erratically, so the instrument was put into a safe state for additional troubleshooting. A second recovery plan was developed and successfully executed on April 23, 2023. Additional information about the Landsat 8 TIRS SSM excursion anomaly is available at https://www.usgs.gov/landsat-missions/news/landsat-8-level-1-product-processing-resumes .

Open-File Report↗

USGS2020

Forecasting, detecting, and tracking volcanic eruptions from space

Satellite monitoring of volcanic activity typically includes four primary observations: (1) deformation and surface change, (2) gas emissions, (3) thermal anomalies, and (4) ash plumes. These phenomena are imaged by remote sensing data that span the electromagnetic spectrum, from microwave to ultraviolet energy and including visible and infrared wavelengths. The primary uses of satellite data in volcanology are forecasting, detecting, and tracking eruptive activity. Eruptions are often preceded by a number of indicators that are detectable from space, including surface deformation, subtle increases in surface temperature, and elevated gas emissions. The first indications of eruption, especially at remote volcanoes, are often identified in satellite data by strong thermal anomalies and/or the presence of ash and gas in the atmosphere, the recognition of which can be automated for rapid eruption detection. Once an eruption is in progress, space-based imagery of all types can track activity over time, providing information on the emplacement of volcanic deposits, the presence and character of ash plumes, and potential changes in the character of the eruption, all of which aid hazards assessment. Activity at Agung volcano, Indonesia, during 2017–2019, offers an excellent example of the importance of remote sensing datasets for forecasting, detecting, and tracking eruptions. Challenges to exploiting current and future satellite data include ensuring regular acquisitions over active volcanoes and developing tools for automated analysis of the massive volume of imagery for volcano-related signals.

Remote Sensing in Earth Systems Sciences↗

USGS2007

Dominant factors in controlling marine gas pools in South China

In marine strata from Sinian to Middle Triassic in South China, there develop four sets of regional and six sets of local source rocks, and ten sets of reservoir rocks. The occurrence of four main formation periods in association with five main reconstruction periods, results in a secondary origin for the most marine gas pools in South China. To improve the understanding of marine gas pools in South China with severely deformed geological background, the dominant control factors are discussed in this paper. The fluid sources, including the gas cracked from crude oil, the gas dissolved in water, the gas of inorganic origin, hydrocarbons generated during the second phase, and the mixed pool fluid source, were the most significant control factors of the types and the development stage of pools. The period of the pool formation and the reconstruction controlled the pool evolution and the distribution on a regional scale. Owing to the multiple periods of the pool formation and the reconstruction, the distribution of marine gas pools was complex both in space and in time, and the gas in the pools is heterogeneous. Pool elements, such as preservation conditions, traps and migration paths, and reservoir rocks and facies, also served as important control factors to marine gas pools in South China. Especially, the preservation conditions played a key role in maintaining marine oil and gas accumulations on a regional or local scale. According to several dominant control factors of a pool, the pool-controlling model can be constructed. As an example, the pool-controlling model of Sinian gas pool in Weiyuan gas field in Sichuan basin was summed up. ?? Higher Education Press and Springer-Verlag 2007.

Frontiers of Earth Science in China↗

USGS1993

Elemental abundance anomalies in the late Cenomanian extinction interval: A search for the source(s)

Elemental abundances have been measured by neutron activation methods across the Cenomanian-Turonian (late Cretaceous) extinction interval in samples collected from sixteen sites in the Western Interior Basin of North America and from twelve widely separated locations around the globe, including six ODP/DSDP sites. In most Western Interior Basin sites, in Colombia, and in western Europe (weaker), two closely spaced elemental abundance peaks occur in the upper Cenomanian (∼ 92 m.y.), spanning the ammonite zones of Sciponoceras gracile through Neocardioceras juddii . Elements with anomalously high concentrations include Sc, Ti, V, Cr, Mn, Co, Ni, Ir, Pt and Au. The lower peak coincides with the disappearance (extinction) of the foraminifer Rotalipora cushmani . In North American sections R. greenhornensis also disappears at or just below this horizon, but in Europe it disappears considerably earlier than R. cushmani . A series of molluscan extinction and speciation or migration events also begins near the stratigraphic level of the lower elemental abundance peak.

Earth and Planetary Science Letters↗

USGS2021

Water–rock interaction and the concentrations of major, trace, and rare earth elements in hydrocarbon-associated produced waters of the United States

Studies of co-produced waters from hydrocarbon extraction across multiple energy-producing basins have generally focused on major ions or a few select tracers, and studies that examine trace elements and involve laboratory experiments have generally been basin specific. Here, new perspective is sought through a broad analysis of concentration data for 26 elements from three hydrocarbon well types using the U.S. Geological Survey National Produced Waters Geochemical Database (v2.3). Those data are compared to leachates (water, hydrochloric acid, and artificial brine) from 12 energy-resource related shales from across the United States. Both lower pH and higher ionic strength were associated with greater concentrations of many trace elements in produced waters. However, individual effects were difficult to distinguish because higher ionic strengths drive decreases in pH. Water–rock interactions in the leaching experiments generally replicated produced water concentrations for trace elements including Al, As, Cd, Co, Cu, Mo, Ni, Pb, Sb, Si, and Zn. Enhanced middle rare earth element (REE) mobilization relative to shale REE content occurred with low pH leachates. Produced water concentrations of Li, Sr, and Ba were not replicated by the leaching experiments. Patterns of high Li, Sr, and Ba concentrations and ratios relative to other elements across produced waters types indicate controls on these elements in many settings related to pore space pools of salts, brines, and ion-exchange sites affected by diagenetic processes. The size of those pools is diluted and masked by other water–rock interaction processes at the water–rock ratios necessitated by laboratory experiments. The results broadly link water–rock interaction processes and environmental patterns across a wide variety of produced waters and host formations and thus provide context for trace element data from other environmental and laboratory studies of such waters.

Environmental Science: Processes & Impacts↗

USGS2010

EAARL Coastal Topography-Eastern Florida, Post-Hurricane Jeanne, 2004: First Surface

These remotely sensed, geographically referenced elevation measurements of lidar-derived first-surface (FS) topography datasets were produced collaboratively by the U.S. Geological Survey (USGS), St. Petersburg Coastal and Marine Science Center, St. Petersburg, FL, and the National Aeronautics and Space Administration (NASA), Wallops Flight Facility, VA. This project provides highly detailed and accurate datasets of a portion of the eastern Florida coastline beachface, acquired post-Hurricane Jeanne (September 2004 hurricane) on October 1, 2004. The datasets are made available for use as a management tool to research scientists and natural-resource managers. An innovative airborne lidar instrument originally developed at the NASA Wallops Flight Facility, and known as the Experimental Advanced Airborne Research Lidar (EAARL), was used during data acquisition. The EAARL system is a raster-scanning, waveform-resolving, green-wavelength (532-nanometer) lidar designed to map near-shore bathymetry, topography, and vegetation structure simultaneously. The EAARL sensor suite includes the raster-scanning, water-penetrating full-waveform adaptive lidar, a down-looking red-green-blue (RGB) digital camera, a high-resolution multispectral color-infrared (CIR) camera, two precision dual-frequency kinematic carrier-phase GPS receivers, and an integrated miniature digital inertial measurement unit, which provide for sub-meter georeferencing of each laser sample. The nominal EAARL platform is a twin-engine Cessna 310 aircraft, but the instrument may be deployed on a range of light aircraft. A single pilot, a lidar operator, and a data analyst constitute the crew for most survey operations. This sensor has the potential to make significant contributions in measuring sub-aerial and submarine coastal topography within cross-environmental surveys. Elevation measurements were collected over the survey area using the EAARL system, and the resulting data were then processed using the Airborne Lidar Processing System (ALPS), a custom-built processing system developed in a NASA-USGS collaboration. ALPS supports the exploration and processing of lidar data in an interactive or batch mode. Modules for presurvey flight-line definition, flight-path plotting, lidar raster and waveform investigation, and digital camera image playback have been developed. Processing algorithms have been developed to extract the range to the first and last significant return within each waveform. ALPS is used routinely to create maps that represent submerged or sub-aerial topography. Specialized filtering algorithms have been implemented to determine the 'bare earth' under vegetation from a point cloud of last return elevations. For more information about similar projects, please visit the Decision Support for Coastal Science and Management website.

Data Series↗

USGS2010

EAARL Coastal Topography-Eastern Louisiana Barrier Islands, Post-Hurricane Gustav, 2008: First Surface

These remotely sensed, geographically referenced elevation measurements of lidar-derived first-surface (FS) topography datasets were produced collaboratively by the U.S. Geological Survey (USGS), St. Petersburg Coastal and Marine Science Center, St. Petersburg, FL, and the National Aeronautics and Space Administration (NASA), Wallops Flight Facility, VA. This project provides highly detailed and accurate datasets of a portion of the eastern Louisiana barrier islands, acquired post-Hurricane Gustav (September 2008 hurricane) on September 6 and 7, 2008. The datasets are made available for use as a management tool to research scientists and natural-resource managers. An innovative airborne lidar instrument originally developed at the NASA Wallops Flight Facility, and known as the Experimental Advanced Airborne Research Lidar (EAARL), was used during data acquisition. The EAARL system is a raster-scanning, waveform-resolving, green-wavelength (532-nanometer) lidar designed to map near-shore bathymetry, topography, and vegetation structure simultaneously. The EAARL sensor suite includes the raster-scanning, water-penetrating full-waveform adaptive lidar, a down-looking red-green-blue (RGB) digital camera, a high-resolution multispectral color infrared (CIR) camera, two precision dual-frequency kinematic carrier-phase GPS receivers, and an integrated miniature digital inertial measurement unit, which provide for sub-meter georeferencing of each laser sample. The nominal EAARL platform is a twin-engine Cessna 310 aircraft, but the instrument may be deployed on a range of light aircraft. A single pilot, a lidar operator, and a data analyst constitute the crew for most survey operations. This sensor has the potential to make significant contributions in measuring sub-aerial and submarine coastal topography within cross-environmental surveys. Elevation measurements were collected over the survey area using the EAARL system, and the resulting data were then processed using the Airborne Lidar Processing System (ALPS), a custom-built processing system developed in a NASA-USGS collaboration. ALPS supports the exploration and processing of lidar data in an interactive or batch mode. Modules for presurvey flight-line definition, flight-path plotting, lidar raster and waveform investigation, and digital camera image playback have been developed. Processing algorithms have been developed to extract the range to the first and last significant return within each waveform. ALPS is used routinely to create maps that represent submerged or sub-aerial topography. Specialized filtering algorithms have been implemented to determine the 'bare earth' under vegetation from a point cloud of last return elevations. For more information about similar projects, please visit the Decision Support for Coastal Science and Management website.

Data Series↗

USGS2007

Petrology and tectonics of Phanerozoic continent formation: From island arcs to accretion and continental arc magmatism

Mesozoic continental arcs in the North American Cordillera were examined here to establish a baseline model for Phanerozoic continent formation. We combine new trace-element data on lower crustal xenoliths from the Mesozoic Sierra Nevada Batholith with an extensive grid-based geochemical map of the Peninsular Ranges Batholith, the southern equivalent of the Sierras. Collectively, these observations give a three-dimensional view of the crust, which permits the petrogenesis and tectonics of Phanerozoic crust formation to be linked in space and time. Subduction of the Farallon plate beneath North America during the Triassic to early Cretaceous was characterized by trench retreat and slab rollback because old and cold oceanic lithosphere was being subducted. This generated an extensional subduction zone, which created fringing island arcs just off the Paleozoic continental margin. However, as the age of the Farallon plate at the time of subduction decreased, the extensional environment waned, allowing the fringing island arc to accrete onto the continental margin. With continued subduction, a continental arc was born and a progressively more compressional environment developed as the age of subducting slab continued to young. Refinement into a felsic crust occurred after accretion, that is, during the continental arc stage, wherein a thickened crustal and lithospheric column permitted a longer differentiation column. New basaltic arc magmas underplate and intrude the accreted terrane, suture, and former continental margin. Interaction of these basaltic magmas with pre-existing crust and lithospheric mantle created garnet pyroxenitic mafic cumulates by fractional crystallization at depth as well as gabbroic and garnet pyroxenitic restites at shallower levels by melting of pre-existing lower crust. The complementary felsic plutons formed by these deep-seated differentiation processes rose into the upper crust, stitching together the accreted terrane, suture and former continental margin. The mafic cumulates and restites, owing to their high densities, eventually foundered into the mantle, leaving behind a more felsic crust. Our grid-based sampling allows us to estimate an unbiased average upper crustal composition for the Peninsular Ranges Batholith. Major and trace-element compositions are very similar to global continental crust averaged over space and time, but in detail, the Peninsular Ranges are slightly lower in compatible to mildly incompatible elements, MgO, Mg#, V, Sc, Co, and Cr. The compositional similarities suggest a strong arc component in global continental crust, but the slight discrepancies suggest that additional crust formation processes are also important in continent formation as a whole. Finally, the delaminated Sierran garnet pyroxenites have some of the lowest U/Pb ratios ever measured for silicate rocks. Such material, if recycled and stored in the deep mantle, would generate a reservoir with very unradiogenic Pb, providing one solution to the global Pb isotope paradox.

Earth and Planetary Science Letters↗

USGS2021

Modes of climate variability bridge proximate and evolutionary mechanisms of masting

There is evidence that variable and synchronous reproduction in seed plants (masting) correlates to modes of climate variability, e.g. El Niño Southern Oscillation and North Atlantic Oscillation. In this perspective, we explore the breadth of knowledge on how climate modes control reproduction in major masting species throughout Earth's biomes. We posit that intrinsic properties of climate modes (periodicity, persistence and trends) drive interannual and decadal variability of plant reproduction, as well as the spatial extent of its synchrony, aligning multiple proximate causes of masting through space and time. Moreover, climate modes force lagged but in-phase ecological processes that interact synergistically with multiple stages of plant reproductive cycles. This sets up adaptive benefits by increasing offspring fitness through either economies of scale or environmental prediction. Community-wide links between climate modes and masting across plant taxa suggest an evolutionary role of climate variability. We argue that climate modes may ‘bridge’ proximate and ultimate causes of masting selecting for variable and synchronous reproduction. The future of such interaction is uncertain: processes that improve reproductive fitness may remain coupled with climate modes even under changing climates, but chances are that abrupt global warming will affect Earth's climate modes so rapidly as to alter ecological and evolutionary links.

Philosophical Transactions of the Royal Society B:↗

USGS2011

Mantle to surface degassing of alkalic magmas at Erebus volcano, Antarctica

Continental intraplate volcanoes, such as Erebus volcano, Antarctica, are associated with extensional tectonics, mantle upwelling and high heat flow. Typically, erupted magmas are alkaline and rich in volatiles (especially CO 2 ), inherited from low degrees of partial melting of mantle sources. We examine the degassing of the magmatic system at Erebus volcano using melt inclusion data and high temporal resolution open-path Fourier transform infrared (FTIR) spectroscopic measurements of gas emissions from the active lava lake. Remarkably different gas signatures are associated with passive and explosive gas emissions, representative of volatile contents and redox conditions that reveal contrasting shallow and deep degassing sources. We show that this unexpected degassing signature provides a unique probe for magma differentiation and transfer of CO 2 -rich oxidised fluids from the mantle to the surface, and evaluate how these processes operate in time and space. Extensive crystallisation driven by CO 2 fluxing is responsible for isobaric fractionation of parental basanite magmas close to their source depth. Magma deeper than 4 kbar equilibrates under vapour-buffered conditions. At shallower depths, CO 2 -rich fluids accumulate and are then released either via convection-driven, open-system gas loss or as closed-system slugs that ascend and result in Strombolian eruptions in the lava lake. The open-system gases have a reduced state (below the QFM buffer) whereas the closed-system gases preserve their deep oxidised signatures (close to the NNO buffer).

Earth and Planetary Science Letters↗

USGS1972

Differentiation and volcanism in the lunar highlands: Photogeologic evidence and Apollo 16 implications

Materials of possible volcanic origin in the lunar highlands include (1) highland plains materials, (2) materials forming closely spaced hills in which summit furrows and chains of craters are common and (3) materials forming closely spaced hills (some of which parallel the lunar grid) on which summit furrows and chain craters are rare. The highland plains materials probably are basaltic lavas with less Fe and Ti than the mare plains materials. The two hilly units appear to consist of materials that, if volcanic, were more viscous in the molten state than any of the lunar plains units; thus these materials may be significantly enriched in felsic components. Most of the highland materials of possible volcanic origin formed after the Imbrium multi-ring basin but before mare material completed flooding parts of the moon; they therefore postdate accretion of the moon and may represent several episodes of premare volcanism.

Earth and Planetary Science Letters↗

USGS2004

Three-dimensional distribution of gas hydrate beneath southern Hydrate Ridge: Constraints from ODP Leg 204

Large uncertainties about the energy resource potential and role in global climate change of gas hydrates result from uncertainty about how much hydrate is contained in marine sediments. During Leg 204 of the Ocean Drilling Program (ODP) to the accretionary complex of the Cascadia subduction zone, we sampled the gas hydrate stability zone (GHSZ) from the seafloor to its base in contrasting geological settings defined by a 3D seismic survey. By integrating results from different methods, including several new techniques developed for Leg 204, we overcome the problem of spatial under-sampling inherent in robust methods traditionally used for estimating the hydrate content of cores and obtain a high-resolution, quantitative estimate of the total amount and spatial variability of gas hydrate in this structural system. We conclude that high gas hydrate content (30-40% of pore space or 20-26% of total volume) is restricted to the upper tens of meters below the seafloor near the summit of the structure, where vigorous fluid venting occurs. Elsewhere, the average gas hydrate content of the sediments in the gas hydrate stability zone is generally <2% of the pore space, although this estimate may increase by a factor of 2 when patchy zones of locally higher gas hydrate content are included in the calculation. These patchy zones are structurally and stratigraphically controlled, contain up to 20% hydrate in the pore space when averaged over zones ???10 m thick, and may occur in up to ???20% of the region imaged by 3D seismic data. This heterogeneous gas hydrate distribution is an important constraint on models of gas hydrate formation in marine sediments and the response of the sediments to tectonic and environmental change. ?? 2004 Published by Elsevier B.V.

Earth and Planetary Science Letters↗

USGS2001

Acidic deposition in the northeastern United States: Sources and inputs, ecosystem effects, and management strategies: The effects of acidic deposition in the northeastern United States include the acidification of soil and water, which stresses terrestrial and aquatic biota

Acidic deposition is the transfer of strong acids and acid-forming substances from the atmosphere to the surface of the Earth. The composition of acidic deposition includes ions, gases, and particles derived from the following: gaseous emissions of sulfur dioxide (SO 2 ), nitrogen oxides (NO x ), ammonia (NH 3 ), and particulate emissions of acidifying and neutralizing compounds. Over the past quarter century of study, acidic deposition has emerged as a critical environmental stress that affects forested landscapes and aquatic ecosystems in North America, Europe, and Asia. This complex problem is an example of a new class of environmental issues that are multiregional in scale and are not amenable to simple resolution by policymakers. Acidic deposition can originate from transboundary air pollution and can affect large geographic areas. It is highly variable across space and time, links air pollution to diverse terrestrial and aquatic ecosystems, and alters the interactions of many elements (e.g., sulfur [S], nitrogen [N], hydrogen ion [H + ], calcium [Ca 2+ ], magnesium [Mg 2+ ], and aluminum [Al]). It also contributes directly and indirectly to biological stress and to the degradation of ecosystems. Despite the complexity of the effects of acidic deposition, North American and European management actions directed toward the recovery of damaged natural resources have resulted in recent decreases in both emissions and deposition of acidic S compounds. Accordingly, acidic deposition presents an instructive case study for coordinating science and policy efforts aimed at resolving large-scale environmental problems.

northeastern United States↗

USGS2011

New strategy needed in earthquake, volcano monitoring

Recent advances in space geodesy provide unprecedented opportunities for measuring and understanding processes related to earthquake occurrence and volcanic eruptions in the United States and elsewhere. The Global Positioning System (GPS) uses Earth-orbiting satellites to obtain relative movements of ground points accurate to a few millimeters, either through periodically repeated surveys or by continuous measurements at permanent sites [ Segall and Davis , 1997]. Satellite interferometric synthetic aperture radar (InSAR) uses repeat-pass radar backscatter images of Earth's surface to obtain complete spatial mappings of surface deformation over 100 km × 100 km scenes to centimeter precision [ Massonnet and Feigl , 1998]. During the past 5 years GPS and InSAR increasingly have been applied to local studies of active fault zones and volcanic systems, imaging the sources of deformation buried in Earth's crust and quantifying the hazards they pose to society. The potential now exists to deploy these tools to map and monitor all of the actively deforming western United States, and a new scientific initiative with these goals is under active discussion [ Silver et al , 1998].

Eos Science News↗

USGS2022

The future of coastal monitoring through satellite remote sensing

Satellite remote sensing is transforming coastal science from a “data-poor” field into a “data-rich” field. Sandy beaches are dynamic landscapes that change in response to long-term pressures, short-term pulses, and anthropogenic interventions. Until recently, the rate and breadth of beach change have outpaced our ability to monitor those changes, due to the spatiotemporal limitations of our observational capacity. Over the past several decades, only a handful of beaches worldwide have been regularly monitored with accurate yet expensive in situ surveys. The long-term coastal-change data of these few well-monitored beaches have led to in-depth understanding of many site-specific coastal processes. However, because the best-monitored beaches are not representative of all beaches, much remains unknown about the processes and fate of the other >99% of unmonitored beaches worldwide. The fleet of Earth-observing satellites has enabled multiscale monitoring of beaches, for the very first time, by providing imagery with global coverage and up to daily frequency. The long-standing and ever-expanding archive of satellite imagery will enable coastal scientists to investigate coastal change at sites vulnerable to future sea-level rise, that is, (almost) everywhere. In the past decade, our capability to observe coastal change from space has grown substantially with computing and algorithmic power. Yet, further advances are needed in automating monitoring using machine learning, deep learning, and computer vision to fully leverage this massive treasure trove of data. Extensive monitoring and investigation of the causes and effects of coastal change at the requisite spatiotemporal scales will provide coastal managers with additional, valuable information to evaluate problems and solutions, addressing the potential for widespread beach loss due to accelerated sea-level rise, development, and reduced sediment supply. Monitoring from Earth-observing satellites is currently the only means of providing seamless data with high spatiotemporal resolution at the global scale of the impending impacts of climate change on coastal systems.

Cambridge Prisms: Coastal Futures↗

USGS2005

Structure and regional significance of the Late Permian(?) Sierra Nevada - Death Valley thrust system, east-central California

An imbricate system of north-trending, east-directed thrust faults of late Early Permian to middle Early Triassic (most likely Late Permian) age forms a belt in east-central California extending from the Mount Morrison roof pendant in the eastern Sierra Nevada to Death Valley. Six major thrust faults typically with a spacing of 15-20 km, original dips probably of 25-35??, and stratigraphic throws of 2-5 km compose this structural belt, which we call the Sierra Nevada-Death Valley thrust system. These thrusts presumably merge into a de??collement at depth, perhaps at the contact with crystalline basement, the position of which is unknown. We interpret the deformation that produced these thrusts to have been related to the initiation of convergent plate motion along a southeast-trending continental margin segment probably formed by Pennsylvanian transform truncation. This deformation apparently represents a period of tectonic transition to full-scale convergence and arc magmatism along the continental margin beginning in the Late Triassic in central California. ?? 2005 Elsevier B.V. All rights reserved.

Earth-Science Reviews↗