USGS Science⌕ Search

SEARCH · USGS Science

Results for “Conference Paper”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16Linked to original sources
USGS2008

Updated radiometric calibration for the Landsat-5 thematic mapper reflective bands

The Landsat-5 Thematic Mapper (TM) has been the workhorse of the Landsat system. Launched in 1984, it continues collecting data through the time frame of this paper. Thus, it provides an invaluable link to the past history of the land features of the Earth's surface, and it becomes imperative to provide an accurate radiometric calibration of the reflective bands to the user community. Previous calibration has been based on information obtained from prelaunch, the onboard calibrator, vicarious calibration attempts, and cross-calibration with Landsat-7. Currently, additional data sources are available to improve this calibration. Specifically, improvements in vicarious calibration methods and development of the use of pseudoinvariant sites for trending provide two additional independent calibration sources. The use of these additional estimates has resulted in a consistent calibration approach that ties together all of the available calibration data sources. Results from this analysis indicate a simple exponential, or a constant model may be used for all bands throughout the lifetime of Landsat-5 TM. Where previously time constants for the exponential models were approximately one year, the updated model has significantly longer time constants in bands 1-3. In contrast, bands 4, 5, and 7 are shown to be best modeled by a constant. The models proposed in this paper indicate calibration knowledge of 5% or better early in life, decreasing to nearly 2% later in life. These models have been implemented at the U.S. Geological Survey Earth Resources Observation and Science (EROS) and are the default calibration used for all Landsat TM data now distributed through EROS. ?? 2008 IEEE.

Conference Paper↗
USGS1987

DISTRIBUTED GROUND-WATER DATA BASE OF THE U. S. G. S.

During the past 20 years, the ground-water data base of the U. S. Geological Survey has evolved from paper files in local offices, to a national data base on a central mainframe computer, to a distributed data base on a network of 49 minicomputers throughout the United States. Users in local offices have easy, inexpensive access to the distributed data base. The distributed data base has caused some problems in data management but has increased the overall quality of the data base.

Conference Paper↗
USGS2019

Implications of aggregating daily production data on estimates of ultimate recovery from horizontal hydraulically fractured Bakken oil wells

The level to which data are aggregated can impact analytical and predictive modeling results. In this short paper we discuss some of our findings regarding the impacts of data aggregation on estimating change points in the production profiles of horizontal hydraulically fractured Bakken oil wells. Change points occur when production transitions from one flow regime to another. Change point determination is important because it governs calculation of ultimate recovery from these and similar wells drilled in shale plays.

Montana, North Dakota↗
USGS2020

Development of a new open-source tool to map burned area and burn severity

Accurate and complete geospatial fire occurrence records are important in determining postfire effects, emissions, hazards, and fuel loading inventories. Currently, the Monitoring Trends in Burn Severity (MTBS) project maps the fire perimeter and burn severity of all large fires on public lands. Although the MTBS project maps a large proportion of the fire acreage, it maps a smaller proportion of the actual number of fires in the United States, thereby creating a data gap. To fill this data gap, fire scientists at the U.S. Geological Survey (USGS) Earth Resources Observation and Science Center (EROS; Sioux Falls, South Dakota) proposed creating an open-source Fire Mapping Tool (FMT; available at https://mtbs.gov/qgis-fire-mapping-tool) as part of a two-phase National Aeronautics and Space Administration (NASA) Applied Fire Science Program grant. Phase II developed the FMT to map burn perimeters and severity not included in the MTBS database. This paper will focus on Phase II and will explain the algorithms that enhance the FMT’s functionality, demonstrate fire mapping procedures, and provide an example comparison between MTBS analyst fire products and those mapped using the FMT. The overall goal in the production of the FMT was to provide a freely available tool that can be used to map fires anywhere in the world.

Washington↗
USGS2026

Open-source gravity reduction workflows for geothermal resource assessment

Potential-field geophysical data such as gravity can enhance understanding of geothermal resources at all stages of the resource life cycle, including assessment, exploration, development, and monitoring, and at multiple scales, from the reservoir scale to regional scale. However, to make gravity data useful for geothermal resource characterization, several processing steps are required to isolate the effects of density variations in the Earth’s crust to enable the identification of structural features associated with geothermal resources. Although this process is well-established, standard computational implementations for processing gravity data that are FAIR (Findable, Accessible, Interoperable, and Reproduceable) are still lacking. This paper details ongoing efforts at the U.S. Geological Survey (USGS) to develop a standard set of open-source Python tools for gravity data reduction that align with the FAIR principles. This workflow makes use of existing open-source tools for geophysical data processing with the goal of maximizing opportunities for rapid improvements, interoperability, and adaptability to other types of geophysical data.

Conference Paper↗
USGS1996

Natural hazard zonation

This paper presents the basic scientific principles underpinning the professional practice of zonation for natural hazards such as floods, severe storms, earthquakes, volcanic eruptions, landslides, wildfires, tsunamis, and droughts. Zonation is the scientific process of identifying those parts of a geographic area which are best and least suited for community development in terms of their exposure to the physical effects of recurring, rapid onset, natural hazards.

Conference Paper↗
USGS1998

On sediment and habitat in the Upper Animas River watershed, Colorado

The Upper Animas River watershed in southwestern Colorado is located in the San Juan mountains and has been intensively mined. Active mining has essentially ceased but the impact of past mining on the aquatic ecosystem continues. This paper presents initial results from a study to determine the characteristics of the physical habitat for aquatic animals and the sediment characteristics as related to the habitat. The habitat for trout is limited by high streamflows and by winter conditions. Only the winter habitat limits are considered. The characteristics of the sediment in the river limit the winter habitat along with metals within the substrate.

Conference Paper↗
USGS2009

Adaptive management of watersheds and related resources

The concept of learning about natural resources through the practice of management has been around for several decades and by now is associated with the term adaptive management. The objectives of this paper are to offer a framework for adaptive management that includes an operational definition, a description of conditions in which it can be usefully applied, and a systematic approach to its application. Adaptive decisionmaking is described as iterative, learning-based management in two phases, each with its own mechanisms for feedback and adaptation. The linkages between traditional experimental science and adaptive management are discussed.

Conference Paper↗
USGS2009

Adaptive management of watersheds and related resources

The concept of learning about natural resources through the practice of management has been around for several decades and by now is associated with the term adaptive management. The objectives of this paper are to offer a framework for adaptive management that includes an operational definition, a description of conditions in which it can be usefully applied, and a systematic approach to its application. Adaptive decisionmaking is described as iterative, learning-based management in two phases, each with its own mechanisms for feedback and adaptation. The linkages between traditional experimental science and adaptive management are discussed.

Conference Paper↗
USGS2007

The HRSC DTM test

The High Resolution Stereo Camera (HRSC, [1]) is part of the orbiter payload on the Mars Express (MEX) mission of the European Space Agency (ESA), orbiting the Red Planet in a highly elliptical orbit since January 2004. For the first time in planetary exploration, a camera system has especially been designed to meet the requirements of photogrammetry and cartography for mapping the complete surface of a planet [2]. For this purpose HRSC operates as a push broom scanning instrument with 9 CCD line detectors mounted in parallel in the focal plane of the camera. Data acquisition is achieved by five panchromatic channels under different observation angles and four colour channels. At periapsis the ground resolution of the nadir channel amounts to 12.5 m, the stereo channels are typically operated at a 2x coarser resolution with the two photometry and the four colour channels at 4x or 8x coarser resolution. The data provided by HRSC are well suited for the automatic generation of Digital Terrain Models (DTMs) and other 3D data products. Such products are of vital interest to planetary sciences. As the Mars Express mission has recently been extended the prospects for a complete topographic mapping of Mars by HRSC at very high resolution are very good, indeed. Image matching is well researched and has been documented in the literature. In general, it is agreed that in simple terrain and with adequate image acquisition geometry very good results can be achieved by totally automated approaches. Things start to be much more complicated if more complex situations are faced, such as steep terrain, height discontinuities, occlusions, poor texture, shadows, atmospheric dust, clouds, increased image noise, compression artefacts etc., some of which are commonplace in HRSC images. Nevertheless, automatic DTM generation from HRSC images by means of image matching has reached a very high level over the years. The systematic processing chain at DLR for producing preliminary DTMs with 200 m resolution [3] runs well and stable. In addition, several groups are able to produce DTMs using different approaches, or have developed alternative modules for parts of the DTM generation process [2]. Also, a few groups have been developing shape-from-shading techniques which have reached pre-operational efficiency. It is against this background that the desire was expressed to compare the individual approaches for deriving DTMs from HRSC images in order to assess their advantages and disadvantages. Based on carefully chosen test sites the test participants have produced DTMs which have been subsequently analysed in a quantitative and a qualitative manner. This paper reports on the results obtained in this test, more details can be found in [4].

Conference Paper↗
USGS2022

It’s time for focused in situ studies of planetary surface-atmosphere interactions

A critical gap in planetary observations has been in situ characterization of extra-terrestrial, present-day atmospheric and surface environments and activity. While some surface activity has been observed and some in situ meteorological measurements have been collected by auxiliary instruments on Mars, existing information is insufficient to conclusively characterize the natural processes via concurrent and high-resolution measurement of environmental drivers and activity. Thus, many atmospheric, aeolian, and other surface processes models – which are used to generate key constraints on science and exploration in many areas of planetary investigation—such as surface exposure/erosion estimates, landscape interpretation, and modeling dust storm development—remain untested under non-Earth conditions. Analogous terrestrial processes are often studied intensively via numerical modeling that integrates empirical results from laboratory and/or field studies of process-response interactions between the atmosphere and relevant surface landforms. Incorporation of such in situ measurements into model development has significantly advanced our understanding of atmosphere-surface interactions and related geomorphic processes on Earth, and is poised to do so on other planets. However, to date, such testing and refinement have not been possible in other planetary environments, partially because investigations of this sort require new technologies, mission architectures, and operations designs (e.g., different from large rovers focused on geochemical investigations) to fully address the key gaps in our understanding while keeping cost and risk low. Fortunately, technological developments in the areas of surface access, instrumentation, and onboard processing/memory now enable small spacecraft to accommodate meteorological and aeolian instrumentation that could collect the needed measurements to fill this critical gap while remaining within typical small spacecraft resource budgets. Furthermore, maturity of our understanding of the broader geologic and atmospheric context on Mars provides a ready framework for ingestion of discrete ground truth measurements into our understanding of the broader and multi-scale martian natural systems and processes. These advancements make addressing key science questions with novel mission concepts feasible, promising results that would significantly advance our understanding of extraterrestrial surface-atmosphere interactions. This summary follows from a community-generated white paper for the ongoing Planetary Science/Astrobiology Decadal Survey, small spacecraft concept development at JPL, and numerous JPL and community discussions.

Conference Paper↗
USGS1990

Computational open-channel hydraulics for movable-bed problems

As a major branch of computational hydraulics, notable advances have been made in numerical modeling of unsteady open-channel flow since the beginning of the computer age. According to the broader definition and scope of 'computational hydraulics,' the basic concepts and technology of modeling unsteady open-channel flow have been systematically studied previously. As a natural extension, computational open-channel hydraulics for movable-bed problems are addressed in this paper. The introduction of the multimode method of characteristics (MMOC) has made the modeling of this class of unsteady flows both practical and effective. New modeling techniques are developed, thereby shedding light on several aspects of computational hydraulics. Some special features of movable-bed channel-flow simulation are discussed here in the same order as given by the author in the fixed-bed case.

Conference Paper↗
USGS2015

Can treatment and disposal costs be reduced through metal recovery?

This paper describes a framework to conduct a “metal-recovery feasibility assessment” for mining influenced water (MIW) and associated treatment sludge. There are multiple considerations in such a determination, including the geologic/geochemical feasibility, market feasibility, technical feasibility, economic feasibility, and administrative feasibility. Each of these considerations needs to be evaluated to determine the practicality of metal recovery from a particular MIW.

Conference Paper↗
USGS2006

Applications of geophysical methods to volcano monitoring

The array of geophysical technologies used in volcano hazards studies - some developed originally only for volcano monitoring - ranges from satellite remote sensing including InSAR to leveling and EDM surveys, campaign and telemetered GPS networks, electronic tiltmeters and strainmeters, airborne magnetic and electromagnetic surveys, short-period and broadband seismic monitoring, even microphones tuned for infrasound. They include virtually every method used in resource exploration except large-scale seismic reflection. By “geophysical ” we include both active and passive methods as well as geodetic technologies. Volcano monitoring incorporates telemetry to handle high-bandwith cameras and broadband seismometers. Critical geophysical targets include the flux of magma in shallow reservoir and lava-tube systems, changes in active hydrothermal systems, volcanic edifice stability, and lahars. Since the eruption of Mount St. Helens in Washington State in 1980, and the eruption at Pu’u O’o in Hawai’i beginning in 1983 and still continuing, dramatic advances have occurred in monitoring technology such as “crisis GIS” and lahar modeling, InSAR interferograms, as well as gas emission geochemistry sampling, and hazards mapping and eruption predictions. The on-going eruption of Mount St. Helens has led to new monitoring technologies, including advances in broadband Wi-Fi and satellite telemetry as well as new instrumentation. Assessment of the gap between adequate monitoring and threat at the 169 potentially dangerous Holocene volcanoes shows where populations are dangerously exposed to volcanic catastrophes in the United States and its territories . This paper focuses primarily on Hawai’ian volcanoes and the northern Pacific and Cascades volcanoes. The US Geological Survey, the US National Park System, and the University of Utah cooperate in a program to monitor the huge Yellowstone volcanic system, and a separate observatory monitors the restive Long Valley caldera in collaboration with the US Forest Service.

Conference Paper↗
USGS1994

Conservation of North Pacific shorebirds

In his introduction to the 1979 Symposium proceedings entitled “Shorebirds in Marine Environments," Frank Pitelka stressed the need for studies and conservation programs that spanned the western hemisphere (Pitelka 1979). In the 15 years since Pitelka's call to arms, the locations of many important migratory and wintering sites for shorebirds have been identified in the Americas (Senner and Howe 1984, Morrison and Ross 1989, Morrison and Butler 1994) and in the East Asian-Australasian flyway (Lane and Parish 1991, Mundkur 1993, Watkins 1993). However, assessments for Central America, the Russian Far East and most of Oceania remain incomplete or lacking. The recognition that shorebird conservation required the protection of habitats throughout the birds' range (e.g., Morrison 1984, Davidson and Evans 1989 in Ens et al. 1990) prompted the establishment of the Western Hemisphere Shorebird Reserve Network (WHSRN) in the Americas in 1985 (Joyce 1986). This program complemented the 1971 Convention on Wetlands of International Importance Especially for Waterbirds (Ramsar Convention, Smart 1987), recognized by more that 50 countries world-wide. Our purpose for writing this paper is to: (1) describe the distribution of North Pacific shorebirds throughout their annual cycle; (2) review the locations of and threats to important sites used by North Pacific shorebirds during the breeding, migration, and wintering periods, and (3) outline a program for international conservation of Pacific shorebirds.

Transactions of the North American Wildlife and Na↗
USGS2007

Local search for optimal global map generation using mid-decadal landsat images

NASA and the US Geological Survey (USGS) are seeking to generate a map of the entire globe using Landsat 5 Thematic Mapper (TM) and Landsat 7 Enhanced Thematic Mapper Plus (ETM+) sensor data from the "mid-decadal" period of 2004 through 2006. The global map is comprised of thousands of scene locations and, for each location, tens of different images of varying quality to chose from. Furthermore, it is desirable for images of adjacent scenes be close together in time of acquisition, to avoid obvious discontinuities due to seasonal changes. These characteristics make it desirable to formulate an automated solution to the problem of generating the complete map. This paper formulates a Global Map Generator problem as a Constraint Optimization Problem (GMG-COP) and describes an approach to solving it using local search. Preliminary results of running the algorithm on image data sets are summarized. The results suggest a significant improvement in map quality using constraint-based solutions. Copyright ?? 2007, Association for the Advancement of Artificial Intelligence (www.aaai.org). All rights reserved.

Conference Paper↗
USGS1989

Some significant records from instrumented structures in California - USGS program

The main objective in seismic instrumentation of structures is to facilitate response studies that lead to improved understanding of the dynamic behavior and the potential for damage to structures under seismic loading. The purpose of this paper is: (1) to review the status of the programs for strong-motion instrumentation of structures in the United States and discuss various procedures and instrumentation schemes designed to best acquire response data from buildings and (2) to discuss preliminary results derived from recorded response data obtained from a well-instrumented structure during the recent Whittier Narrows earthquake of October 1, 1987 (M3 = 5.6).

Conference Paper↗
USGS1990

Origin of carbonate deposits in the vicinity of Yucca Mountain, Nevada. Preliminary results of strontium-isotope analyses

As part of the paleohydrology study of the Yucca Mountain Project, strontium-isotope analyses of carbonate deposits, ground water, and major rock reservoirs of strontium are in progress. This paper presents a summary of the strontium-isotope data obtained through 1989. Calcium carbonate is ubiquitous in the vicinity of Yucca Mountain, where it occurs as pedogenic horizons and rhizoliths, small veins and fracture fillings in Tertiary volcanic rocks, large veins and masses along faults, and freshwater and marine limestones. With the exception of marine limestones, which are Paleozoic, the calcium carbonate has been precipitated directly from water during the past 107 years. This paper reports strontium-isotope compositions of the following carbonate groups: 1) limestones of the Paleozoic basement, 2) calcite-silica veins, 3) small calcite veins, 4) pedogenic carbonate deposits, and 5) spring deposits (i.e., tufa). The authors have also analyzed the strontium from samples of Tertiary volcanic rocks and from ground water.

Conference Paper↗