USGS Science⌕ Search

SEARCH · USGS Science

Results for “California Geology”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16Linked to original sources
USGS2008

California Cenozoic Biostratigraphy -- Paleogene: Chapter 4 in Petroleum systems and geologic assessment of oil and gas in the San Joaquin Basin Province, California

The time transgressive nature of the California benthic foraminiferal stages is in most cases the result of poor taxonomy, use of local species ranges, and a lack of understanding about the type sections. Correcting these problems allows the stages to be consistently applied and enhances their ability to identify coeval strata. Each stage is identified by the first and last appearances of selected cosmopolitan benthic foraminiferal species and of reliable local species. Although further study is needed, the stages correlate with the international time scale. The revised age interpretation of the stages suggests that the Cheneyian Stage is coeval with planktic zone P1 through P3, the Ynezian Stage is coeval with planktic zone P4, the Bulitian Stage is missing in most section but when present is coeval with zones P5 and P6a, the Penutian Stage is coeval with planktic zones P6b through early P9 (no younger than the overlap between P9 and CP11), the Ulatisian Stage is coeval with P9 (younger than CP11) through P11, the Narizian Stage is coeval with zones P12 through P15, and the Refugian Stage is coeval with zones P16 and P17.

California↗
USGS2010

Three-dimensional geologic modeling of the Santa Rosa Plain, California

New three-dimensional (3D) lithologic and stratigraphic models of the Santa Rosa Plain (California, USA) delineate the thickness, extent, and distribution of subsurface geologic units and allow integration of diverse data sets to produce a lithologic, stratigraphic, and structural architecture for the region. This framework can be used to predict pathways of groundwater flow beneath the Santa Rosa Plain and potential areas of enhanced or focused seismic shaking. Lithologic descriptions from 2683 wells were simplified to 19 internally consistent lithologic classes. These distinctive lithologic classes were used to construct a 3D model of lithologic variations within the basin by extrapolating data away from drill holes using a nearest-neighbor approach. Subsurface stratigraphy was defined through the identification of distinctive lithologic packages tied, where possible, to high-quality well control and to surface exposures. The 3D stratigraphic model consists of three bounding components: fault surfaces, stratigraphic surfaces, and a surface representing the top of pre-Cenozoic basement, derived from inversion of regional gravity data. The 3D lithologic model displays a west to east transition from dominantly marine sands to heterogeneous continental sediments. In contrast to previous stratigraphic studies, the new models emphasize the prevalence of the clay-rich Petaluma Formation and its heterogeneous nature. Isopach maps of the Glen Ellen Formation and the 3D stratigraphic model show the influence of the Trenton Ridge, a concealed basement ridge that bisects the plain, on sedimentation; the thickest deposits of the Glen Ellen Formation are confined to north of the Trenton Ridge.

California↗
USGS2012

Seafloor geology and benthic habitats, San Pedro Shelf, southern California

Seafloor samples, videography, still photography, and real-time descriptions of geologic and biologic constituents at or near the seafloor of the San Pedro Shelf, southern California, advance the study of natural and man-made processes on this coastal area off the metropolitan Los Angeles area. Multibeam echo-sounder data collected by the U.S. Geological Survey in 1998 and 1999 guided sampling and camera work in 2004 resulting in a new seafloor character map that shows possible benthic habitats in much higher resolution (4- and 16-m pixels) than previously available. The seafloor is characterized by primarily muddy sand and sand with outcrops of Miocene and Pliocene bedrock along the Palos Verdes Fault Zone. Observed benthic populations indicate low abiotic complexity, low biotic complexity, and low biotic coverage. The data are provided for use in geographic information systems (GIS).

California↗
USGS2013

Tsunami mitigation and preparedness activities in California

Scenario planning and final results associated with the U.S. Geological Survey Science Application for Risk Reduction (SAFRR) tsunami project are providing great benefits to the ongoing tsunami risk-reduction efforts of the California Tsunami Preparedness and Hazard Mitigation Program. This program, led by the California Governor’s Office of Emergency Services and the California Geological Survey, works with coastal communities to improve tsunami preparedness and mitigation at the local level through various efforts, such as improving tsunami hazard analysis, establishing consistent evacuation communications and planning, and leveraging national risk-reduction efforts associated with the National Tsunami Hazard Mitigation Program. The recent 2010 Chilean and 2011 Tohoku tsunamis did not cause notable inundation of dry land in California, but dozens of harbors sustained damages totaling nearly $100 million (Wilson and others, 2012a). Estimates associated with the SAFRR distant tsunami scenario suggest socioeconomic and environmental losses could be even larger. Information gathered from these events and the SAFRR scenario is guiding the development and implementation of new strategies for emergency response, maritime planning, and land-use planning, including a reassessment of the tsunami threat along the California coast; scenario-specific, tsunami evacuation “playbook” maps and guidance in-harbor hazard maps and offshore safety zones for potential boat evacuation during future distant source events; “probability-based” products for land-use planning under the California Seismic Hazard Mapping Act; and an expansion of real-time and post-tsunami field reconnaissance teams and information sharing through a state-wide clearinghouse. The state tsunami program has benefitted greatly from participation in the SAFRR tsunami scenario process, and hopes to continue this relationship with the U.S. Geological Survey to help improve tsunami preparedness in California.

California↗
USGS2014

Scenario earthquake hazards for the Long Valley Caldera-Mono Lake area, east-central California (ver. 2.0, January 2018)

As part of the U.S. Geological Survey’s (USGS) multi-hazards project in the Long Valley Caldera-Mono Lake area, the California Geological Survey (CGS) developed several earthquake scenarios and evaluated potential seismic hazards, including ground shaking, surface fault rupture, liquefaction, and landslide hazards associated with these earthquake scenarios. The results of these analyses can be useful in estimating the extent of potential damage and economic losses because of potential earthquakes and also for preparing emergency response plans. The Long Valley Caldera-Mono Lake area has numerous active faults. Five of these faults or fault zones are considered capable of producing magnitude ≥6.7 earthquakes according to the Uniform California Earthquake Rupture Forecast, Version 2 (UCERF 2) developed by the 2007 Working Group on California Earthquake Probabilities (WGCEP) and the USGS National Seismic Hazard Mapping Program. These five faults are the Fish Slough, Hartley Springs, Hilton Creek, Mono Lake, and Round Valley Faults. CGS developed earthquake scenarios for these five faults in the study area and for the White Mountains Fault Zone to the east of the study area. In this report, an earthquake scenario is intended to depict the potential consequences of significant earthquakes. A scenario earthquake is not necessarily the largest or most damaging earthquake possible on a recognized fault. Rather it is both large enough and likely enough that emergency planners should consider it in regional emergency response plans. In particular, the ground motion predicted for a given scenario earthquake does not represent a full probabilistic hazard assessment, and thus it does not provide the basis for hazard zoning and earthquake-resistant building design. Earthquake scenarios presented here are based on fault geometry and activity data developed by the WGCEP, and are consistent with the 2008 Update of the United States National Seismic Hazard Maps (NSHM). Alternatives to the NSHM scenario were developed for the Hilton Creek and Hartley Springs Faults to account for different opinions in how far these two faults extend into Long Valley Caldera. For each scenario, ground motions were calculated using the current standard practice: the deterministic seismic hazard analysis program developed by Art Frankel of USGS and three Next Generation Ground Motion Attenuation (NGA) models. Ground motion calculations incorporated the potential amplification of seismic shaking by near-surface soils defined by a map of the average shear wave velocity in the uppermost 30 m ( V S30 ) developed by CGS. In addition to ground shaking and shaking-related ground failure such as liquefaction and earthquake induced landslides, earthquakes cause surface rupture displacement, which can lead to severe damage of buildings and lifelines. For each earthquake scenario, potential surface fault displacements are estimated using deterministic and probabilistic approaches. Liquefaction occurs when saturated sediments lose their strength because of ground shaking. Zones of potential liquefaction are mapped by incorporating areas where loose sandy sediments, shallow groundwater, and strong earthquake shaking coincide in the earthquake scenario. The process for defining zones of potential landslide and rockfall incorporates rock strength, surface slope, and existing landslides, with ground motions caused by the scenario earthquake. Each scenario is illustrated with maps of seismic shaking potential and fault displacement, liquefaction, and landslide potential. Seismic shaking is depicted by the distribution of shaking intensity, peak ground acceleration, and 1.0-second spectral acceleration. One-second spectral acceleration correlates well with structural damage to surface facilities. Acceleration greater than 0.2 g is often associated with strong ground shaking and may cause moderate to heavy damage. The extent of strong shaking is influenced by subsurface fault dip and near surface materials. Strong shaking is more widespread in the hanging wall regions of a normal fault. Larger ground motions also occur where young alluvial sediments amplify the shaking. Both of these effects can lead to strong shaking that extends farther from the fault on the valley side than on the hill side. The effect of fault rupture displacements may be localized along the surface trace of the mapped earthquake fault if fault geometry is simple and the fault traces are accurately located. However, surface displacement hazards can spread over a few hundred meters to a few kilometers if the earthquake fault has numerous splays or branches, such as the Hilton Creek Fault. Faulting displacements are estimated to be about 1 meter along normal faults in the study area and close to 2 meters along the White Mountains Fault Zone. All scenarios show the possibility of widespread ground failure. Liquefaction damage would likely occur in the areas of higher ground shaking near the faults where there are sandy/silty sediments and the depth to groundwater is 6.1 meters (20 feet) or less. Generally, this means damage is most common near lakes and streams in the areas of strongest shaking. Landslide potential exists throughout the study region. All steep slopes (>30 degrees) present a potential hazard at any level of shaking. Lesser slopes may have landslides within the areas of the higher ground shaking. The landslide hazard zones also are likely sources for snow avalanches during winter months and for large boulders that can be shaken loose and roll hundreds of feet down hill, which happened during the 1980 Mammoth Lakes earthquakes. Whereas methodologies used in estimating ground shaking, liquefaction, and landslides are well developed and have been applied in published hazard maps; methodologies used in estimating surface fault displacement are still being developed. Therefore, this report provides a more in-depth and detailed discussion of methodologies used for deterministic and probabilistic fault displacement hazard analyses for this project.

California↗
USGS2007

Preliminary Surficial Geology of the Dove Spring Off-Highway Vehicle Open Area, Mojave Desert, California

Introduction As part of a U.S. Geological Survey (USGS) monitoring plan to evaluate the environmental impact of off-highway vehicle (OHV) use on Bureau of Land Management (BLM) land in California, this report presents results of geologic studies in the Dove Spring OHV Open Area. This study produced baseline data, which when combined with historic and current patterns of land use, forms the basis for vegetation and wildlife monitoring designed to address the following questions: 1. Is the density and length of OHV routes increasing? 2. Are there cumulative effects of past and current OHV use associated with changes in the environmental integrity of soils, plants, and wildlife? 3. Is the spread of invasive species associated with levels of OHV use? 4. Is there a threshold of OHV impact that might be translated to management action by the BLM? The monitoring studies will be used to collect baseline environmental information to determine levels of environmental impact of OHV use. This approach will use a low-impact area as a proxy for pre-impact conditions (substituting space for time) to determine thresholds of OHV impacts beyond which environmental integrity is affected. Indicators of environmental integrity will emphasize factors that are fundamental to ecosystem structure and function and likely to be sensitive to OHV impacts. Surficial geology is studied because material properties such as texture and chemistry strongly control soil moisture and nutrient availability and therefore affect plant growth and distribution. An understanding of surficial geology can be used to predict and extrapolate soil properties and improve understanding of vegetation assemblages and their distribution. In the present study, vegetation associations may be examined as a function of surficial geology as well as other environmental variables such as slope, aspect, NRCS (National Resources Conservation Service) soil classification, elevation, and land-use history. Ground measurements of vegetation, biological soil crusts, compaction, and other information may be correlated with land use to identify possible ecological thresholds in OHV use that require monitoring. Surficial geology is relevant for several other studies of OHV impact, such as soil compaction, dust emissions, and acceleration of erosion. Compaction, reduced infiltration, and accelerated erosion have been documented in Dove Spring Canyon because of OHV use (Snyder and others, 1976) and elsewhere in the Mojave Desert (e.g., Webb, 1983; Langdon, 2000). A surficial geologic map enables the use of geomorphic process models, which when combined with measured soil properties, such as texture, nutrient chemistry, and bulk density, allows spatial extrapolation of the properties. Maps can be produced that predict compaction susceptibility, moisture conditions, dust emissions, flood hazards, and erodibility, among other applications.

Open-File Report↗
USGS2006

Geophysical Investigations of the Smoke Creek Desert and their Geologic Implications, Northwest Nevada and Northeast California

The Smoke Creek Desert is a large basin about 100 km (60 mi) north of Reno near the California-Nevada border, situated along the northernmost parts of the Walker Lane Belt, a physiographic region defined by diverse topographic expression consisting of northweststriking topographic features and strike-slip faulting. Because geologic and geophysical framework studies play an important role in understanding the hydrogeology of the Smoke Creek Desert, a geophysical effort was undertaken to help determine basin geometry, infer structural features, and estimate depth to basement. In the northernmost parts of the Smoke Creek Desert basin, along Squaw Creek Valley, geophysical data indicate that the basin is shallow and that granitic rocks are buried at shallow depths throughout the valley. These granitic rocks are faulted and fractured and presumably permeable, and thus may influence ground-water resources in this area. The Smoke Creek Desert basin itself is composed of three large oval sub-basins, all of which reach depths to basement of up to about 2 km (1.2 mi). In the central and southern parts of the Smoke Creek Desert basin, magnetic anomalies form three separate and narrow EW-striking features. These features consist of high-amplitude short-wavelength magnetic anomalies and probably reflect Tertiary basalt buried at shallow depth. In the central part of the Smoke Creek Desert basin a prominent EW-striking gravity and magnetic prominence extends from the western margin of the basin to the central part of the basin. Along this ridge, probably composed of Tertiary basalt, overlying unconsolidated basin-fill deposits are relatively thin (< 400 m). The central part of the Smoke Creek Desert basin is also characterized by the Mid-valley fault, a continuous geologic and geophysical feature striking NS and at least 18-km long, possibly connecting with faults mapped in the Terraced Hills and continuing southward to Pyramid Lake. The Mid-valley fault may represent a lateral (east-west) barrier to ground-water flow. In addition, the Mid-valley fault may also be a conduit for along-strike (north-south) ground-water flow, channeling flow to the southernmost parts of the basin and the discharge areas north of Sand Pass.

Open-File Report↗
USGS2001

Geologic map of the Devore 7.5' quadrangle, San Bernardino County, California

This Open-File Report contains a digital geologic map database of the Devore 7.5' quadrangle, San Bernardino County, California, that includes: 1. ARC/INFO (Environmental Systems Research Institute) version 7.2.1 coverages of the various components of the geologic map 2. A PostScript (.ps) file to plot the geologic map on a topographic base, containing a Correlation of Map Units diagram, a Description of Map Units, an index map, and a regional structure map 3. Portable Document Format (.pdf) files of: a. This Readme; includes an Appendix, containing metadata details found in devre_met.txt b. The same graphic as plotted in 2 above. (Test plots from this .pdf do not produce 1:24,000-scale maps. Adobe Acrobat page-size settings control map scale.) The Correlation of Map Units and Description of Map Units are in the editorial format of USGS Miscellaneous Investigations Series maps (I-maps) but have not been edited to comply with I-map standards. Within the geologic-map data package, map units are identified by such standard geologic-map criteria as formation name, age, and lithology. Even though this is an author-prepared report, every attempt has been made to closely adhere to the stratigraphic nomenclature of the U.S. Geological Survey. Descriptions of units can be obtained by viewing or plotting the .pdf file (3b above) or plotting the postscript file (2 above). If roads in some areas, especially forest roads that parallel topographic contours, do not show well on plots of the geologic map, we recommend use of the USGS Devore 7.5’ topographic quadrangle in conjunction with the geologic map.

California↗
USGS2022

Preliminary bedrock geologic map of the Blythe 30' x 60' quadrangle, California and Arizona

The Blythe 30' x 60' quadrangle in southeastern California and southwestern Arizona displays complex geology that includes Mesozoic contractional deformation, metamorphism, and magmatism in addition to Cenozoic extensional deformation and magmatism. Previous geologic map compilations predate recent geologic mapping efforts that have contributed new insights into the stratigraphy and structure of this quadrangle. This new map, compiled in collaboration with the Arizona Geological Survey, incorporates these recent mapping efforts to provide an updated depiction of the quadrangle’s geologic framework. The scope of this map is limited to bedrock units of Miocene and older age because younger deposits have not been mapped in enough detail across the quadrangle to support a systematic compilation.

Arizona, California↗
USGS2009

Science for Stewardship of California's Water Resources

The U.S. Geological Survey (USGS) is the primary Federal agency responsible for scientific evaluation of the natural resources of the United States, including its water. To meet the demands of a growing California, the U.S. Geological Survey's California Water Science Center provides essential science to help Federal, State, and local water agencies evaluate and manage California's critical water resources; adapt to a changing climate; assess, predict, and mitigate natural hazards, such as mudslides and debris flows; and protect the health of rivers, forests, wetlands, and other habitats. The following are some of the ways the USGS is working with other agencies to protect California's water resources and assure that Californians have safe and reliable water supplies for now and in the future.

Fact Sheet↗
USGS1979

Pollen counts from core 7, Clear Lake, Lake County, California

The U. S. Geological Survey recovered eight sediment cores from beneath Clear Lake, Lake County, California, in 1973. The locations of the core sites are shown in fig. 1; lithologic descriptions of the cores, as well as radiographs, have been given by Sims and Rymer (1975a-g, 1976). A list of the procedures followed in sampling the cores and a list of the samples taken may be found in Beaver and others (1975); fish remains from two of the cores have been studied by Casteel and others (1975, 1977a,1977b). This report gives raw count data for 72 pollen samples from core 7, a 27.4-m long core from the southern or Highlands Arm of the lake (fig. 1). Pollen counts for core 4, a 115-m core from the main basin of the lake, are given in Adam (1979); that core spans the time interval between the end of the penultimate glacial period, about 130,000 years ago, and the present.

California↗
USGS2011

Reported historic asbestos mines, historic asbestos prospects, and other natural occurrences of asbestos in California

The map (Plate.pdf), pamphlet (Pamphlet.pdf), and the accompanying datasets in this report provide information for 290 sites in California where asbestos occurs in natural settings, using descriptions found in the geologic literature. Data on location, mineralogy, geology, and relevant literature for each asbestos site are provided. Using the map and digital data in this report, the user can examine the distribution of previously reported asbestos and their geological characteristics in California. This report is part of an ongoing study by the U.S. Geological Survey to identify and map sites where asbestos mineralization occurs in the United States, which includes similar maps and datasets of natural asbestos localities within the Eastern United States (http://pubs.usgs.gov/of/2005/1189/), the Central United States (http://pubs.usgs.gov/of/2006/1211/), the Rocky Mountain States (http://pubs.usgs.gov/of/2007/1182/), the Southwestern United States (http://pubs.usgs.gov/of/2008/1095/), and the Northwestern United States (Oregon and Washington) (http://pubs.usgs.gov/of/2010/1041/). These reports are intended to provide State and local government agencies and other stakeholders with geologic information on reported asbestos mineralization in the United States.

California↗