USGS Science⌕ Search

SEARCH · USGS Science

Results for “Seismological Research Letteres”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15Linked to original sources
USGS2025

High-pass corner frequency selection and review tool for use in ground-motion processing

Raw seismological waveform data contain noise from the instrument’s surroundings and the instrument itself that can dominate recordings at low and high frequencies. To use these data in ground‐motion modeling, the effects of noise on the signals must be reduced and the signals’ usable frequency range identified. We present automated procedures to efficiently reduce low‐frequency noise that are implemented in the software package gmprocess. These procedures check for, and as needed remove, low‐frequency artifacts in the displacement record using polynomial fits, which can be used in combination with existing signal‐to‐noise ratio (SNR)‐based corner‐frequency selection procedures. The automated selections are then efficiently verified and refined using a graphical user interface (GUI) that plots relevant ground‐motion time series and spectra and tracks modifications to signal processing parameters. We demonstrate these procedures using recordings from the 2020 M 5.1 Sparta, North Carolina, and the 2013 M 4.7 southern Ontario earthquakes. Data processed with the SNR‐only and polynomial criteria for these events contain displacement artifacts in 37% and 23% of processed traces, respectively. Records with remaining artifacts are corrected manually using the GUI. These processing steps illustrate the workflow for efficient data processing with quality control.

Seismological Research Letters↗
USGS2024

On algorithmically determined versus traditional macroseismic intensity assignments

The utility of macroseismic data, defined as the effects of earthquakes on humans and the built environment, has been increasingly recognized following the advent of online systems that now produce unprecedented volumes of macroseismic intensity information. Contributed reports from the U.S. Geological Survey “Did You Feel It?” (DYFI) system ( Wald et al ., 1999 ) are used to generate intensity values with an algorithm based on seminal work by Dengler and Dewey (1998) . The algorithm was developed initially to reproduce intensity values assigned by expert opinion using questionnaire results collected by telephone survey. In this article, I discuss reasons why intensity values from (self‐selected) DYFI responses can differ from values that would be assigned by expert opinion given more complete data from randomly selected participants. For example, with the data used by Dengler and Dewey (1998) , intensities near 4 could be determined from the percentage of people who felt shaking in each town. With less spatially rich data from self‐selected participants, this percentage often cannot be determined reliably. Audible noises are key additional diagnostic criteria for modified Mercalli intensity (MMI) 4, but, although the DYFI system includes a question about noise, following Dengler and Dewey (1998) , the DYFI algorithm does not include a noise indicator. At the upper end of the scale, as defined the DYFI algorithm yields a maximum intensity value of 9.05, nominally corresponding to peak ground acceleration of 75% g . These and other factors can result in DYFI values that are low compared to traditional MMI values assigned using expert opinion, even absent factors that can bias traditional MMI assignments. Modern ground‐motion intensity conversion equations determined using DYFI intensities are expected to be appropriate for DYFI intensities, but the results of this study suggest that biases may be introduced if DYFI and traditional intensities are assumed to be interchangeable.

Seismological Research Letters↗
USGS2024

Preface to the focus section on volcano monitoring in the Americas

From the Andes to the Aleutian Islands, the Americas are rich with volcanism that spans a diverse range of tectonic settings, eruptive styles, levels of activity, and hazards. Over the past 120 yr, the Americas have witnessed catastrophic volcanic eruptions that have significantly impacted nearby populations. Notable events include the 8 May 1902, pyroclastic density current from Mount Pelée in Martinique, which resulted in the loss of over 28,000 lives in Saint‐Pierre, with only one or two survivors (Lacroix, 1904), and the 1985 eruption of Nevado del Ruiz in Colombia, which triggered a lahar and left an estimated...

Seismological Research Letters↗
USGS2024

Are field observations of surface rupture useful? An example from the 2023 Mw 7.8 Pazarcık, Turkey (Türkiye), earthquake

Field investigations have long been an important component of the scientific response to surface‐faulting earthquakes. However, in light of advances in remote data and models, the question arises whether field‐based observations of surface rupture remain useful for understanding rupture processes and seismic hazards. We approach this question using a field‐based study of the central 2023 M w 7.8 Pazarcık, Turkey (Türkiye), earthquake rupture, at the intersection of the east Anatolian fault (EAF) and Narlı fault. Our field observations include the surface rupture expression and extent of the central EAF and northernmost Narlı fault in generally forested and steep terrain and 68 measurements of left‐lateral surface displacement. These data improve our understanding of the Pazarcık rupture complexity, resolve the surface geometry of the Narlı fault–EAF connection, and exhibit a clear (>2 m) change in surface displacement across this intersection zone that confirms remote‐based coseismic slip models. Our study shows that focusing field efforts in areas of obscured or low‐resolution remote data can yield essential data for refining rupture extent, documenting perishable on‐fault displacement, and improving postearthquake situational awareness. A comparison of similarly large‐magnitude continental surface‐rupturing earthquakes indicates that displacement uncertainties relate to a complex set of factors, including measurement methods, rupture complexity, and displacement magnitude. Our study validates the need for postearthquake field observations, which, when driven by clear motivating questions and knowledge of methodological strengths and limitations, provide high‐resolution rupture data that complement remote‐based models.

Pazarcık↗
USGS2024

Distinguishing natural sources from anthropogenic events in seismic data

As seismic data are increasingly used to investigate a diverse range of subsurface phenomena beyond regular fast-rupturing earthquakes (Peng and Gomberg, 2010; Beroza and Ide, 2011), it is important to acknowledge that human-generated ground vibrations may be mistaken for naturally generated subsurface processes (Larose et al., 2015; Li et al., 2018). Correct discrimination of natural processes from anthropogenic noise is especially pressing given the trend in seismic detection research toward automated algorithms and machine learning methods (Yoon et al., 2015; Kong et al., 2019;Mousavi and Beroza, 2022) and the growth in seismic data collection in new environments such as urban and industry settings (e.g., Díaz et al.,2017).

Seismological Research Letters↗
USGS2025

Seismic intensities, ground motions and basin amplification from the 2022 Mw 6.4 Ferndale, California intraslab earthquake

On December 20, 2022, a Mw 6.4 earthquake occurred at a depth of 18 km within the subducting Gorda plate in the Mendocino Triple Junction (MTJ), one of the most seismically active regions of the contiguous United States, causing widespread damage to local communities. Here we document the seismic intensities, ground motions, and basin amplification effects recorded by this earthquake across Humboldt County as part of an ongoing scientific effort to understand subduction zone earthquake hazards. Modified Mercalli Intensity (MMI) values from our post-earthquake field survey report shaking intensities as high as VIII (Severe). Strong ground motion data from 54 seismic stations were processed to calculate amplitude and frequency content parameters across Northern California. The maximum calculated geometric mean PGA and PGV are 1053 cm/s 2 and 52 cm/s (respectively), both recorded within the 3 km deep Eel River sedimentary basin. Comparisons with four published Ground Motion Prediction Equations indicate that PGA and PGV measurements align with expected attenuation-distance patterns for intraslab earthquakes of this nature. Within the Eel River Basin, ground motions for frequencies above 1 Hz are amplified, with respect to reference stations, by factors greater than 2. Our findings suggest that peak ground motions were mainly caused by sedimentary basin site-effects within the Eel River basin, although rupture directivity may have also increased ground motion amplitudes locally. While the Ferndale area is primarily impacted by shallow intraslab earthquakes, our results also raise questions about site-response and basin amplification hazards from a potential megathrust earthquake. The high seismicity rates of the southernmost Cascades call for stronger regional preparedness and improved strategies to mitigate the effects of such a large-scale disaster.

California↗
USGS2025

Estimating earthquake source depth using teleseismic broadband waveform modeling at the USGS National Earthquake Information Center

The U.S. Geologic Survey National Earthquake Information Center (NEIC) monitors global seismicity, producing a catalog of earthquake source parameters in near-real-time to provide information that can help mitigate the societal impact of earthquakes. The NEIC commonly relies on teleseismic observations to constrain earthquake source parameters (e.g., location, depth, magnitude, and mechanism) due to a lack of local and regional observations. For these ‘teleseismic’ events, depth phase (i.e., pP , sP ) arrival time observations provide the best estimate on source depth. However, depth phases are often difficult to accurately identify and/or pick. Therefore, NEIC relies on waveform modeling, such as those determined from W-phase ( M ww ), body wave ( M wb ), and regional ( M wr ) moment tensor estimations, to provide constraints on source depth. While depth estimates from these approaches are informative, higher frequency observations provide more precise estimates because depth phases are more prominently observed at higher frequencies. Here, we present NEIC’s relatively high-frequency (~0.04 to 1 Hz) teleseismic waveform modeling approach, termed Synthetic Depth Phase Modeling (SynDepth), for determining source depth. SynDepth was developed to provide NEIC with a tool that enables rapid, accurate, and quantifiable estimates of earthquake source depth in cases where locator depths are not reliable. This relatively simple and fast procedure searches over 1 km-incremented source depths and an expanding triangular source-time function to find the best-fitting solution. We compare automatic SynDepth solutions for a dataset of 1,216 earthquakes (M5.5-M7.6) between 2017 and 2021 to NEIC-derived depth estimates from other methods. Our approach provides a robust depth estimate for earthquakes lacking local arrival time data, and it minimizes the need for analyst review of depth-phase picks ( pP , sP ) or using predefined ‘fixed’ depths.

Seismological Research Letters↗
USGS2025

REDPy: A Python tool for automated repeating earthquake detection and visualization

Detecting and cataloging seismic events are among the most fundamental tasks in seismology. Many standardized tools for these tasks exist, including the open‐source package repeating earthquake detector in Python (REDPy). REDPy generates an organized catalog of seismic events from continuous waveform data, in which events are automatically separated into groups (“families”) by their waveform similarity through cross‐correlation. REDPy also automatically generates various outputs that allow a user to visualize important trends in the catalog, which may be used in real time or in retrospective analyses to allow rapid identification of interesting features. The code was designed for near‐real‐time volcano monitoring but is applicable across a broad range of use cases in seismology and seismoacoustics. In this article, the utility and performance of REDPy are demonstrated on two highly seismogenic volcanic eruption sequences: the onset of the dome‐building eruption of Mount St. Helens, Washington, from 2004 to 2005, and the entirety of the summit caldera collapse sequence of Kīlauea, Hawai‘i, in 2018. This article is meant to be a companion to the documentation of the code; in addition to detailing the basic required inputs, script functionality, and resulting outputs, the reasonings behind several important design decisions are also discussed.

Seismological Research Letters↗
USGS2025

What 25+ years of "Did You Feel It" intensities tell us about shaking in California

“When will the Big One happen?” is a question that people often have for earthquake scientists. But while waiting for the “Big One” to occur, people will usually experience frightening or damaging shaking from multiple relatively smaller‐magnitude earthquakes. Given this context, it raises the question: “Where does most of the damage come from?” Could smaller, yet more frequent, earthquakes account for the majority of reported impactful shaking? To explore this question, we consider reports of earthquake damage and felt shaking experiences from a catalog of community‐collected intensity values from the U.S. Geological Survey’s “Did You Feel It?” system. Comparing these intensities to expectations from a ground‐motion model, we find that earthquakes of magnitudes smaller than expected are responsible for most reported intensities of community decimal intensities (CDI) 4.5 and above (moderate and higher shaking intensity levels). (Here “expected value” is meant in its mathematical sense of the mean or equivalently median shaking intensity.) We also present a regional analysis of observed earthquake shaking for specific areas, detailing the maximum intensity experienced within a predetermined area. We identify several instances of M < 4.5 events that generated maximum intensities of CDI > 5 in regions in California surrounding the cities of Eureka, San Francisco, Los Angeles, and San Diego. Our results motivate the need to include smaller‐magnitude earthquakes in communications about earthquake hazard and risk reduction.

California↗
USGS2025

The GorDAS Distributed Acoustic Sensing experiment above the Cascadia locked zone and subducted Gorda Slab

The southernmost portion of the Cascadia Subduction zone in Northern California produces high rates of moderate and large earthquakes owing to subduction of the Gorda slab and deformation associated with the Mendocino Triple Junction. Distributed Acoustic Sensing (DAS) is rapidly advancing as a method for detecting earthquakes and imaging crustal structure. We have begun a long-term DAS monitoring experiment on buried telecom fiber in Arcata, California, with the goal of increasing the available recordings of moderate to large earthquakes as well as imaging seismogenic structures. We have recorded over a year's worth of data, including most aftershocks of the 2022 M w 6.4 Ferndale earthquake, though not the mainshock itself. The dataset includes numerous magnitude 3.5 and larger earthquakes including the 2023/01/01 M w 5.4 Rio Dell earthquake. Here we present initial results comparing an earthquake detection algorithm, run in real-time on the processing unit of the interrogator system, with both the ShakeAlert earthquake early warning system as well as a post-processed earthquake catalog developed with deep-learning phase-picker algorithms. The rapid onboard processing of the detector demonstrates the potential utility of DAS-based edge computing for earthquake early warning. We also verify the quality of the strain waveforms both in terms of peak amplitudes and waveform similarity using about five months of nodal seismometer data. These instruments were deployed roughly every 300 m along the ~15km long cable and validate large variations in peak strain over short distances that are seen in the DAS data. All data from time windows surrounding both the local and teleseismic earthquakes are publicly available, which will improve our understanding of both the performance of DAS systems in moderate earthquakes and earthquake hazards associated with the Gorda subduction zone.

California↗
USGS2025

Haunted Summerville: Ghostly lights or earthquake lights?

Among the colorful local lore in the Charleston, South Carolina, area, are a number of ghost stories, shared not only over campfires but also in published books. Among the most well-known of the stories is the tale of the Summerville Light. Local lore holds that a strange light sometimes seen in a remote area is a lantern carried by the ghost of a local woman who once waited hours for her husband, who turned out to have been decapitated earlier that day in a train accident (DePoppe, 2023). Extant sources suggest the ghost stories began to circulate in the 1950s to 1960s. So pervasive was the lore that (Old) Sheep Island Road became known among local residents as Light Road, with a local stretch of road known today as Old Light Road. Reviewing the location where the lights appear as well as the nature of accounts, I suggest that many if not all of the anecdotal observations can be most readily attributed to natural phenomena, including earthquake lights from earthquakes that were too small to be felt. Accounts of lights near Summerville cluster in proximity to the generally accepted epicenter of the 1886 Charleston, South Carolina, earthquake, where foreshocks to the 1886 mainshock were apparently concentrated, and within a few kilometers of three M3.5 – 4.4 earthquakes in 1959 and 1960.

South Carolina↗
USGS2025

A newly identified creeping strand of the Concord fault, San Francisco Bay Area

The Concord fault constitutes a major branch of the Pacific–North America transform plate boundary in Northern California, bridging the strike‐slip Bartlett Springs ‐ Green Valley Fault system to the north with the Greenville and Calaveras Faults to the south. Like many faults in the San Francisco Bay Area its long‐term slip is partially accommodated by aseismic slip (creep). Although creep has been recognized and monitored on the northern half of the fault for decades, the precise location of the southern half of the fault and its slip rate—whether accommodated seismically or aseismically—has remained enigmatic. How slip transfers between the Concord and Greenville or Calaveras faults to the south remains an outstanding question. New field observations presented here indicate that the active trace of the fault south of downtown Concord is not where previously interpreted and is indeed actively creeping. We report observations of shallow creep continuing >7 km farther south along the Concord fault than previously reported, along a fault strand not previously recognized for most of its length. This is evident as right‐laterally deflected concrete curbs and sidewalk slabs on both sides of every street that crosses the fault at a high angle in southeast Concord and northeast Walnut Creek. We document the magnitude and location of these deflections to estimate accumulated right‐lateral aseismic slip expressed in engineered structures. Offsets of these piercing lines range from 8 to 18 cm, over widths varying from narrow breaks along centimeter‐scale concrete joints to 10‐m‐wide zones of deflection. Significantly, this active trace is ∼400 m west of where the Quaternary active trace has previously been inferred, placing it within—rather than bounding—the built area of suburban Concord. Slip along the fault has already caused infrastructure damage. These results revise our understanding of the southern Concord fault and help constrain its seismic potential.

California↗
USGS2025

Using gridded seismicity to forecast the long-term spatial distribution of earthquakes for the 2025 Puerto Rico and U.S. Virgin Islands National Seismic Hazard Model

Gridded (or background) seismicity models are a critical component of probabilistic seismic hazard assessments, accounting for off‐fault and smaller‐magnitude earthquakes. They are typically developed by declustering and spatially smoothing an earthquake catalog to estimate a long‐term seismicity rate that can be used to forecast future earthquakes. Here, we present new gridded seismicity models for use in the 2025 National Seismic Hazard Model (NSHM) for Puerto Rico and the U.S. Virgin Islands (PRVI). The previous PRVI NSHM was released in 2003, and our new models incorporate updates to both data and methodology. We utilize an updated earthquake catalog based on improved Puerto Rico Seismic Network data with newly characterized completeness epochs. The catalog is divided into crustal, subduction interface, and intraslab seismicity using new methods and Slab2 subduction zone geometries. To forecast the long‐term spatial distribution of earthquakes, we use an updated methodology developed for the 2023 U.S. 50‐state NSHM, considering three declustering methods and two spatial smoothing methods based on 2D Gaussian kernels. To adapt it for the complex seismotectonics of the region, we also adopt probabilistic methods to account for events with unknown depths and uncertainties in tectonic classification, and develop a new method for spatial scaling to counteract the effects of spatial variability in network coverage while maintaining the use of smaller events. Finally, we test the performance of these spatial models in forecasting the location of M w ≥ 5earthquakes in the region. Our updated methodology improves the representation of epistemic uncertainty relative to the 2003 model, and our results demonstrate the effectiveness of the new measures we have introduced to address heterogeneities in network detection and systematically evaluate forecast performance.

Puerto Rico, U.S. Virgin Islands↗
USGS2026

Wavelet Inversion for SliP (WISP): Open-source earthquake slip modeling software

Models of the spatiotemporal evolution of earthquake slip, termed finite-fault models, are a critical component of rapid earthquake and tsunami response, earthquake forecasting, seismic ground-motion estimates, and studies of earthquake kinematics. Here, we detail a newly released finite-fault modeling software, Wavelet Inversion for SliP (WISP), in use at the U.S. Geological Survey’s National Earthquake Information Center (NEIC) and available to the public. WISP version 1.1.0 allows inversion of teleseismic body and surface waves, as well as local strong-motion, static and dynamic Global Navigation Satellite System, and satellite imagery (e.g., Interferometric Synthetic Aperture Radar) observations on single or multiple planar fault segments. The software is used in NEIC rapid response of earthquakes M w ≥ 7, generally resulting in a published model within the first few hours after the event origin time. The rupture location and dimensions are then used as inputs to downstream products to estimate earthquake shaking, predict loss, and model the likelihood of secondary hazards, namely landslides and liquefaction. WISP is also used in research studies to evaluate the characteristics of complex ruptures including multifault ruptures and earthquake doublets, among others. The WISP version 1.1.0 software release is composed of Python-wrapped FORTRAN code to accomplish the inversion procedure. A simple command line interface facilitates ease of use even for those with only a cursory knowledge of Python scripting. WISP version 1.1.0 includes a Jupyter Notebook tutorial demonstrating use of the software for modeling the 2015 M w 8.3 Illapel, Chile, earthquake. In parallel with the tutorial, we demonstrate the typical usage of the WISP software using the M w 8.3 Illapel earthquake example here.

Seismological Research Letters↗
USGS2025

Fiber-optic sensing for earthquake hazards research, monitoring and early warning

The use of fiber‐optic sensing systems in seismology has exploded in the past decade. Despite an ever‐growing library of ground‐breaking studies, questions remain about the potential of fiber‐optic sensing technologies as tools for advancing if not revolutionizing earthquake‐hazards‐related research, monitoring, and early warning systems. A working group convened to explore these topics; we comprehensively examined the application of fiber optics in various aspects of earthquake hazards, encompassing earthquake source processes, crustal imaging, data archiving, and technological challenges. There is great potential for fiber‐optic systems to advance earthquake monitoring and understanding, but to fully unlock their capabilities requires continued progress in key areas of research and development, including instrument testing and validation, increased dynamic range for applications focused on larger earthquakes, and continued improvement in subsurface and source imaging methods. A key current stumbling block results from the lack of clear data archiving requirements, and we propose an initial strategy that balances data volume requirements with preserving key data for a broad range of future studies. In addition, we demonstrate the potential for fiber‐optic sensing to impact monitoring efforts by documenting the data completeness in a number of long‐term experiments. Finally, we outline the features of a instrument testing facility that would enable progress toward reliable and standardized distributed acoustic sensing data. Overcoming these current obstacles would facilitate progress in fiber‐optic sensing and unlock its potential application to a broad range of earthquake hazard problems.

California, Oregon, Washington↗
USGS2025

Revisiting seismological discoveries of the inner core

Seismology has been used as a tool for understanding the current physical properties of the interior of the Earth and its dynamic evolution with remarkable success over the last century. Much of this progress is due to the ever‐expanding set of high‐quality quantitative observations of teleseismic waveforms recorded at seismographic stations worldwide. In this work, we revisit historical seismological studies that helped first identify a core distinct in physical properties from the overlying mantle, followed by the detection of an inner core that was eventually verified to be solid based on normal‐mode eigenperiods. Along with a brief overview of past studies of the Earth’s inner core, we examine the reproducibility of these results and discuss how historical data compare against modern observations. After accounting for past normal‐mode misidentifications, we confirm that introducing a solid inner core is required to afford significant improvements in fits to both radial modes and core‐sensitive spheroidal overtones. Strong shear dissipation in the inner core of the radial reference Earth model, REM1D ( ⁠⁠ Q u = 89.54 ), fits the reference datasets of both normal‐mode eigenperiods and quality factors accounting for physical dispersion. Because a liquid region would only have bulk dissipation, a narrow range of low Q u values that are preferred by the reference datasets affords additional evidence of a solid inner core. In addition, we find that there is little systematic bias in the timing accuracy of historical data, although large variances exist. Investigations into the temperature, composition, and evolution of the inner core, as well as the reproducibility of past studies, can benefit from the reconciliation of historical and modern seismological datasets.

Seismological Research Letters↗
USGS2025

Subduction zone earthquake catalog separation tool: Implementation in the USGS 2025 Puerto Rico and U.S. Virgin Islands National Seismic Hazard Model

The U.S. Geological Survey (USGS) periodically releases updates to National Seismic Hazard Model (NSHM) for the United States and its territories leveraging current scientific knowledge and methodologies to guide public policy, building codes, and risk assessments regarding potential ground shaking due to earthquakes that may result in infrastructure damage. In subduction zones, there is a need to separate the earthquake catalog into tectonic regimes to create specific seismicity models for which the most appropriate ground‐motion models are then applied. Here, we describe newly developed methods and software, called CatSep, that classifies subduction zone events into three primary tectonic regimes: crustal, interface, and intraslab. This method incorporates information about the location of the earthquake relative to the subducting slab, the depth of the Mohorovičić discontinuity, and the earthquake’s moment tensor. Applying this method is a first step in the NSHM workflow for regions covering U.S. subduction zones. Results using this subduction zone earthquake catalog separation tool for the 2025 Puerto Rico and U.S. Virgin Islands NSHM earthquake catalog are presented and analyzed.

Puerto Rico, U.S. Virgin Islands↗
USGS2026

Making many out of one: Synthetic geologic deformation model distributions for use in USGS NSHM25‐PRVI Puerto Rico-U.S. Virgin Island update

A key use‐case of geologic slip rates is within deformation models used in probabilistic seismic hazard analyses. Field‐derived geologic slip rates have formed the cornerstone of deformation models in such applications for decades. Recent advancements in seismic hazard analyses have expanded the use of faults for which geologic slip rates are not well constrained using categorical slip rate estimates. Because of these advancements, application of a geologic deformation model for use in 2025 U.S. Geological Survey National Seismic Hazard Model Puerto Rico‐U.S. Virgin Islands (NSHM25‐PRVI) proved challenging due to: (1) a lack of field‐based geologic slip rates, and (2) a lack of epistemic uncertainty distributions within a broad range of estimated slip rates. Preliminary versions of the NSHM25‐PRVI model sampled these slip rate bins in a coincident manner along preferred and extreme value branches, which yielded untenable correlations in mean hazard results. To minimize the influence of correlated uncertainties amid these challenges, we develop a synthetic epistemic uncertainty distribution for deformation rate on each crustal fault. Each fault has a weighting schema across four possible distribution shapes: uniform, normal, triangular favoring local minima, and triangular favoring local maxima. The synthetic distributions are then sampled several times for each logic tree branch. The results provide a more realistic distribution of rates across the study region as compared with using correlated extrema sampling. This exploration of our method in a small region like PRVI can pave the way for larger‐scale, more complicated applications (e.g., western United States).

Puerto Rico, US Virgin Islands↗