SEARCH · USGS Science

Results for “Remote Sensing of Environment”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15Linked to original sources

USGS2000

Classification methods for monitoring Arctic sea ice using OKEAN passive/active two-channel microwave data

This paper presents methods for classifying Arctic sea ice using both passive and active (2-channel) microwave imagery acquired by the Russian OKEAN 01 polar-orbiting satellite series. Methods and results are compared to sea ice classifications derived from nearly coincident Special Sensor Microwave Imager (SSM/I) and Advanced Very High Resolution Radiometer (AVHRR) image data of the Barents, Kara, and Laptev Seas. The Russian OKEAN 01 satellite data were collected over weekly intervals during October 1995 through December 1997. Methods are presented for calibrating, georeferencing and classifying the raw active radar and passive microwave OKEAN 01 data, and for correcting the OKEAN 01 microwave radiometer calibration wedge based on concurrent 37 GHz horizontal polarization SSM/I brightness temperature data. Sea ice type and ice concentration algorithms utilized OKEAN's two-channel radar and passive microwave data in a linear mixture model based on the measured values of brightness temperature and radar backscatter, together with a priori knowledge about the scattering parameters and natural emissivities of basic sea ice types. OKEAN 01 data and algorithms tended to classify lower concentrations of young or first-year sea ice when concentrations were less than 60%, and to produce higher concentrations of multi-year sea ice when concentrations were greater than 40%, when compared to estimates produced from SSM/I data. Overall, total sea ice concentration maps derived independently from OKEAN 01, SSM/I, and AVHRR satellite imagery were all highly correlated, with uniform biases, and mean differences in total ice concentration of less than four percent (sd<15%).

Remote Sensing of Environment↗

USGS2001

Investigating a physical basis for spectroscopic estimates of leaf nitrogen concentration

The reflectance spectra of dried and ground plant foliage are examined for changes directly due to increasing nitrogen concentration. A broadening of the 2.1-??m absorption feature is observed as nitrogen concentration increases. The broadening is shown to arise from two absorptions at 2.054 ??m and 2.172 ??m. The wavelength positions of these absorptions coincide with the absorption characteristics of the nitrogen-containing amide bonds in proteins. The observed presence of these absorption features in the reflectance spectra of dried foliage is suggested to form a physical basis for high correlations established by stepwise multiple linear regression techniques between the reflectance of dry plant samples and their nitrogen concentration. The consistent change in the 2.1-??m absorption feature as nitrogen increases and the offset position of protein absorptions compared to those of other plant components together indicate that a generally applicable algorithm may be developed for spectroscopic estimates of nitrogen concentration from the reflectance spectra of dried plant foliage samples. ?? 2001 Published by Elsevier Science Ireland Ltd.

Remote Sensing of Environment↗

USGS2001

Thematic accuracy of MRLC land cover for the eastern United States

One objective of the MultiResolution Land Characteristics (MRLC) consortium is to map general land-cover categories for the conterminous United States using Landsat Thematic Mapper (TM) data. Land-cover mapping and classification accuracy assessment are complete for the eastern United States. The accuracy assessment was based on photo-interpreted reference data obtained from a stratified probability sample of pixels. Agreement was defined as a match between primary or alternate reference land-cover labels assigned to each sample pixel and the mode (most common class) of the map's land-cover labels within a 3×3-pixel neighborhood surrounding the sampled point. At 30-m resolution, overall accuracy was 59.7% at an Anderson Level II thematic detail, and 80.5% at Anderson Level I.

Remote Sensing of Environment↗

USGS2001

Forest impact estimated with NOAA AVHRR and landsat TM data related to an empirical hurricane wind-field distribution

An empirical model was used to relate forest type and hurricane-impact distribution with wind speed and duration to explain the variation of hurricane damage among forest types along the Atchafalaya River basin of coastal Louisiana. Forest-type distribution was derived from Landsat Thematic Mapper image data, hurricane-impact distribution from a suite of transformed advanced very high resolution radiometer images, and wind speed and duration from a wind-field model. The empirical model explained 73%, 84%, and 87% of the impact variances for open, hardwood, and cypress-tupelo forests, respectively. These results showed that the estimated impact for each forest type was highly related to the duration and speed of extreme winds associated with Hurricane Andrew in 1992. The wind-field model projected that the highest wind speeds were in the southern basin, dominated by cypress-tupelo and open forests, while lower wind speeds were in the northern basin, dominated by hardwood forests. This evidence could explain why, on average, the impact to cypress-tupelos was more severe than to hardwoods, even though cypress-tupelos are less susceptible to wind damage. Further, examination of the relative importance of wind speed in explaining the impact severity to each forest type showed that the impact to hardwood forests was mainly related to tropical-depression to tropical-storm force wind speeds. Impacts to cypress-tupelo and open forests (a mixture of willows and cypress-tupelo) were broadly related to tropical-storm force wind speeds and by wind speeds near and somewhat in excess of hurricane force. Decoupling the importance of duration from speed in explaining the impact severity to the forests could not be fully realized. Most evidence, however, hinted that impact severity was positively related to higher durations at critical wind speeds. Wind-speed intervals, which were important in explaining the impact severity on hardwoods, showed that higher durations, but not the highest wind speeds, were concentrated in the northern basin, dominated by hardwoods. The extreme impacts associated with the cypress-tupelo forests in the southeast corner of the basin intersected the highest durations as well as the highest wind speeds. ?? 2001 Published by Elsevier Science Inc.

Remote Sensing of Environment↗

USGS2001

Effects of Landsat 5 Thematic Mapper and Landsat 7 Enhanced Thematic Mapper plus radiometric and geometric calibrations and corrections on landscape characterization

The Thematic Mapper (TM) instruments onboard Landsats 4 and 5 provide high-quality imagery appropriate for many different applications, including land cover mapping, landscape ecology, and change detection. Precise calibration was considered to be critical to the success of the Landsat 7 mission and, thus, issues of calibration were given high priority during the development of the Enhanced Thematic Mapper Plus (ETM+). Data sets from the Landsat 5 TM are not routinely corrected for a number of radiometric and geometric artifacts, including memory effect, gain/bias, and interfocal plane misalignment. In the current investigation, the effects of correcting vs. not correcting these factors were investigated for several applications. Gain/bias calibrations were found to have a greater impact on most applications than did memory effect calibrations. Correcting interfocal plane offsets was found to have a moderate effect on applications. On June 2, 1999, Landsats 5 and 7 data were acquired nearly simultaneously over a study site in the Niobrara, NE area. Field radiometer data acquired at that site were used to facilitate crosscalibrations of Landsats 5 and 7 data. Current findings and results from previous investigations indicate that the internal calibrator of Landsat 5 TM tracked instrument gain well until 1988. After this, the internal calibrator diverged from the data derived from vicarious calibrations. Results from this study also indicate very good agreement between prelaunch measurements and vicarious calibration data for all Landsat 7 reflective bands except Band 4. Values are within about 3.5% of each other, except for Band 4, which differs by 10%. Coefficient of variation (CV) values derived from selected targets in the imagery were also analyzed. The Niobrara Landsat 7 imagery was found to have lower CV values than Landsat 5 data, implying that lower levels of noise characterize Landsat 7 data than current Landsat 5 data. It was also found that following radiometric normalization, the Normalized Difference Vegetation Index (NDVI) imagery and classification products of Landsats 5 and 7 were very similar. This implies that data from the two sensors can be used to measure and monitor the same landscape phenomena and that Landsats 5 and 7 data can be used interchangeably with proper caution. In addition, it was found that difference imagery produced using Landsat 7 ETM+ data are of excellent quality.

Remote Sensing of Environment↗

USGS2001

Cloud characterization and clear-sky correction from Landsat-7

Landsat, with its wide swath and high resolution, fills an important mesoscale gap between atmospheric variations seen on a few kilometer scale by local surface instrumentation and the global view of coarser resolution satellites such as MODIS. In this important scale range, Landsat reveals radiative effects on the few hundred-meter scale of common photon mean-free-paths, typical of scattering in clouds at conservative (visible) wavelengths, and even shorter mean-free-paths of absorptive (near-infrared) wavelengths. Landsat also reveals shadowing effects caused by both cloud and vegetation that impact both cloudy and clear-sky radiances. As a result, Landsat has been useful in development of new cloud retrieval methods and new aerosol and surface retrievals that account for photon diffusion and shadowing effects. This paper discusses two new cloud retrieval methods: the nonlocal independent pixel approximation (NIPA) and the normalized difference nadir radiance method (NDNR). We illustrate the improvements in cloud property retrieval enabled by the new low gain settings of Landsat-7 and difficulties found at high gains. Then, we review the recently developed “path radiance” method of aerosol retrieval and clear-sky correction using data from the Department of Energy Atmospheric Radiation Measurement (ARM) site in Oklahoma. Nearby clouds change the solar radiation incident on the surface and atmosphere due to indirect illumination from cloud sides. As a result, if clouds are nearby, this extra side-illumination causes clear pixels to appear brighter, which can be mistaken for extra aerosol or higher surface albedo. Thus, cloud properties must be known in order to derive accurate aerosol and surface properties. A three-dimensional (3D) Monte Carlo (MC) radiative transfer simulation illustrates this point and suggests a method to subtract the cloud effect from aerosol and surface retrievals. The main conclusion is that cloud, aerosol, and surface retrievals are linked and must be treated as a combined system. Landsat provides the range of scales necessary to observe the 3D cloud radiative effects that influence joint surface-atmospheric retrievals.

Remote Sensing of Environment↗

USGS2001

The Landsat 7 mission: terrestrial research and applications for the 21st century

The Landsat Earth observation approach introduced in 1972 created a new way of monitoring land cover and land use globally. The Landsat 7 mission, successfully launched on April 15, 1999, continues those observations and demonstrates significant progress in precise numerical radiometry, spectral differentiation, and seasonally repetitive monitoring. Substantial improvements in calibration procedures, both prior to launch and during normal operations, have also been made to ensure long-term stability in the acquired spectral radiometry. Landsat 7 data acquisitions are being driven by a long-term data acquisition plan that was designed to ensure that substantially cloud-free, seasonal coverage would be recorded and archived in the US for all land areas of the globe. NASA competitively selected a Landsat Science Team, consisting of representatives from US universities and government agencies, to exploit the Landsat 7 record for global change research. This team is addressing the technical and analytical means to process and analyze the core of this observation record, and for the first time in the history of the Landsat mission, the technical and operational aspects of the mission are being driven by the goals of the US science community. The expected outcome of these efforts is a rapid improvement in understanding the Earth system, as well as conceptual knowledge that will underpin significant advancements in the application of this technology for commercial, operational, educational, and research purposes. Pathways to achieve effective Landsat continuity in the early decades of the 21st century are also being given careful attention, and there is no question that the lessons learned from the Landsat 7 mission will strongly influence these next-generation sensor systems.

Remote Sensing of Environment↗

USGS2002

Satellite mapping of surface biophysical parameters at the biome scale over the North American grasslands: A case study

Quantification of biophysical parameters is needed by terrestrial process modeling and other applications. A study testing the role of multispectral data for monitoring biophysical parameters was conducted over a network of grassland field sites in the Great Plains of North America. Grassland biophysical parameters [leaf area index (LAI), fraction of absorbed photosynthetically active radiation (fPAR), and biomass] and their relationships with ground radiometer normalized difference vegetation index (NDVI) were established in this study ( r 2 =.66–.85) from data collected across the central and northern Great Plains in 1995. These spectral/biophysical relationships were compared to 1996 field data from the Tallgrass Prairie Preserve in northeastern Oklahoma and showed no consistent biases, with most regression estimates falling within the respective 95% confidence intervals. Biophysical parameters were estimated for 21 “ground pixels” (grids) at the Tallgrass Prairie Preserve in 1996, representing three grazing/burning treatments. Each grid was 30×30 m in size and was systematically sampled with ground radiometer readings. The radiometric measurements were then converted to biophysical parameters and spatially interpolated using geostatistical kriging. Grid-based biophysical parameters were monitored through the growing season and regressed against Landsat Thematic Mapper (TM) NDVI ( r 2 =.92–.94). These regression equations were used to estimate biophysical parameters for grassland TM pixels over the Tallgrass Prairie Preserve in 1996. This method maintained consistent regression development and prediction scales and attempted to minimize scaling problems associated with mixed land cover pixels. A method for scaling Landsat biophysical parameters to coarser resolution satellite data sets (1 km 2 ) was also investigated.

Remote Sensing of Environment↗

USGS2002

Impact of sensor's point spread function on land cover characterization: Assessment and deconvolution

Measured and modeled point spread functions (PSF) of sensor systems indicate that a significant portion of the recorded signal of each pixel of a satellite image originates from outside the area represented by that pixel. This hinders the ability to derive surface information from satellite images on a per-pixel basis. In this study, the impact of the PSF of the Moderate Resolution Imaging Spectroradiometer (MODIS) 250 m bands was assessed using four images representing different landscapes. Experimental results showed that though differences between pixels derived with and without PSF effects were small on the average, the PSF generally brightened dark objects and darkened bright objects. This impact of the PSF lowered the performance of a support vector machine (SVM) classifier by 5.4% in overall accuracy and increased the overall root mean square error (RMSE) by 2.4% in estimating subpixel percent land cover. An inversion method based on the known PSF model reduced the signals originating from surrounding areas by as much as 53%. This method differs from traditional PSF inversion deconvolution methods in that the PSF was adjusted with lower weighting factors for signals originating from neighboring pixels than those specified by the PSF model. By using this deconvolution method, the lost classification accuracy due to residual impact of PSF effects was reduced to only 1.66% in overall accuracy. The increase in the RMSE of estimated subpixel land cover proportions due to the residual impact of PSF effects was reduced to 0.64%. Spatial aggregation also effectively reduced the errors in estimated land cover proportion images. About 50% of the estimation errors were removed after applying the deconvolution method and aggregating derived proportion images to twice their dimensional pixel size. ?? 2002 Elsevier Science Inc. All rights reserved.

Remote Sensing of Environment↗

USGS2002

Seasonal comparisons of sea ice concentration estimates derived from SSM/I, OKEAN, and RADARSAT data

The Special Sensor Microwave Imager (SSM/I) microwave satellite radiometer and its predecessor SMMR are primary sources of information for global sea ice and climate studies. However, comparisons of SSM/I, Landsat, AVHRR, and ERS-1 synthetic aperture radar (SAR) have shown substantial seasonal and regional differences in their estimates of sea ice concentration. To evaluate these differences, we compared SSM/I estimates of sea ice coverage derived with the NASA Team and Bootstrap algorithms to estimates made using RADARSAT, and OKEAN-01 satellite sensor data. The study area included the Barents Sea, Kara Sea, Laptev Sea, and adjacent parts of the Arctic Ocean, during October 1995 through October 1999. Ice concentration estimates from spatially and temporally near-coincident imagery were calculated using independent algorithms for each sensor type. The OKEAN algorithm implemented the satellite's two-channel active (radar) and passive microwave data in a linear mixture model based on the measured values of brightness temperature and radar backscatter. The RADARSAT algorithm utilized a segmentation approach of the measured radar backscatter, and the SSM/I ice concentrations were derived at National Snow and Ice Data Center (NSIDC) using the NASA Team and Bootstrap algorithms. Seasonal and monthly differences between SSM/I, OKEAN, and RADARSAT ice concentrations were calculated and compared. Overall, total sea ice concentration estimates derived independently from near-coincident RADARSAT, OKEAN-01, and SSM/I satellite imagery demonstrated mean differences of less than 5.5% (S.D.<9.5%) during the winter period. Differences between the SSM/I NASA Team and the SSM/I Bootstrap concentrations were no more than 3.1% (S.D.<5.4%) during this period. RADARSAT and OKEAN-01 data both yielded higher total ice concentrations than the NASA Team and the Bootstrap algorithms. The Bootstrap algorithm yielded higher total ice concentrations than the NASA Team algorithm. Total ice concentrations derived from OKEAN-01 and SSM/I satellite imagery were highly correlated during winter, spring, and fall, with mean differences of less than 8.1% (S.D.<15%) for the NASA Team algorithm, and less than 2.8% (S.D.<13.8%) for the Bootstrap algorithm. Respective differences between SSM/I NASA Team and SSM/I Bootstrap total concentrations were less than 5.3% (S.D.<6.9%). Monthly mean differences between SSM/I and OKEAN differed annually by less than 6%, with smaller differences primarily in winter. The NASA Team and Bootstrap algorithms underestimated the total sea ice concentrations relative to the RADARSAT ScanSAR no more than 3.0% (S.D.<9%) and 1.2% (S.D.<7.5%) during cold months, and no more than 12% and 7% during summer, respectively. ScanSAR tended to estimate higher ice concentrations for ice concentrations greater than 50%, when compared to SSM/I during all months. ScanSAR underestimated total sea ice concentration by 2% compared to the OKEAN-01 algorithm during cold months, and gave an overestimation by 2% during spring and summer months. Total NASA Team and Bootstrap sea ice concentration estimates derived from coincident SSM/I and OKEAN-01 data demonstrated mean differences of no more than 5.3% (S.D.<7%), 3.1% (S.D.<5.5%), 2.0% (S.D.<5.5%), and 7.3% (S.D.<10%) for fall, winter, spring, and summer periods, respectively. Large disagreements were observed between the OKEAN and NASA Team results in spring and summer for estimates of the first-year (FY) and multiyear (MY) age classes. The OKEAN-01 algorithm and data tended to estimate, on average, lower concentrations of young or FY ice and higher concentrations of total and MY ice for all months and seasons. Our results contribute to the growing body of documentation about the levels of disparity obtained when seasonal sea ice concentrations are estimated using various types of satellite data and algorithms.

Remote Sensing of Environment↗

USGS2002

Statewide land cover derived from multiseasonal Landsat TM data: A retrospective of the WISCLAND project

Landsat Thematic Mapper (TM) data were the basis in production of a statewide land cover data set for Wisconsin, undertaken in partnership with U.S. Geological Survey's (USGS) Gap Analysis Program (GAP). The data set contained seven classes comparable to Anderson Level I and 24 classes comparable to Anderson Level II/III. Twelve scenes of dual-date TM data were processed with methods that included principal components analysis, stratification into spectrally consistent units, separate classification of upland, wetland, and urban areas, and a hybrid supervised/unsupervised classification called "guided clustering." The final data had overall accuracies of 94% for Anderson Level I upland classes, 77% for Level II/III upland classes, and 84% for Level II/III wetland classes. Classification accuracies for deciduous and coniferous forest were 95% and 93%, respectively, and forest species' overall accuracies ranged from 70% to 84%. Limited availability of acceptable imagery necessitated use of an early May date in a majority of scene pairs, perhaps contributing to lower accuracy for upland deciduous forest species. The mixed deciduous/coniferous forest class had the lowest accuracy, most likely due to distinctly classifying a purely mixed class. Mixed forest signatures containing oak were often confused with pure oak. Guided clustering was seen as an efficient classification method, especially at the tree species level, although its success relied in part on image dates, accurate ground troth, and some analyst intervention. ?? 2002 Elsevier Science Inc. All rights reserved.

Remote Sensing of Environment↗

USGS2002

Achieving sub-pixel geolocation accuracy in support of MODIS land science

The Moderate Resolution Imaging Spectroradiometer (MODIS) was launched in December 1999 on the polar orbiting Terra spacecraft and since February 2000 has been acquiring daily global data in 36 spectral bands—29 with 1 km, five with 500 m, and two with 250 m nadir pixel dimensions. The Terra satellite has on-board exterior orientation (position and attitude) measurement systems designed to enable geolocation of MODIS data to approximately 150 m (1 σ ) at nadir. A global network of ground control points is being used to determine biases and trends in the sensor orientation. Biases have been removed by updating models of the spacecraft and instrument orientation in the MODIS geolocation software several times since launch and have improved the MODIS geolocation to approximately 50 m (1 σ ) at nadir. This paper overviews the geolocation approach, summarizes the first year of geolocation analysis, and overviews future work. The approach allows an operational characterization of the MODIS geolocation errors and enables individual MODIS observations to be geolocated to the sub-pixel accuracies required for terrestrial global change applications.

Remote Sensing of Environment↗

USGS2003

Effects of landscape characteristics on land-cover class accuracy

The effects of patch size and land-cover heterogeneity on classification accuracy were evaluated using reference data collected for the National Land-Cover Data (NLCD) set accuracy assessment. Logistic regression models quantified the relationship between classification accuracy and these landscape variables for each land-cover class at both the Anderson Levels I and II classification schemes employed in the NLCD. The general relationships were consistent, with the odds of correctly classifying a pixel increasing as patch size increased and decreasing as heterogeneity increased. Specific characteristics of these relationships, however, showed considerable diversity among the various classes. Odds ratios are reported to document these relationships. Interaction between the two landscape variables was not a significant influence on classification accuracy, indicating that the effect of heterogeneity was not impacted by the sample being in a small or large patch. Landscape variables remained significant predictors of class-specific accuracy even when adjusted for regional differences in the mapping and assessment processes or landscape characteristics. The land-cover class-specific analyses provide insight into sources of classification error and a capacity for predicting error based on a pixel's mapped land-cover class, patch size and surrounding land-cover heterogeneity.

Remote Sensing of Environment↗

USGS2003

Lithologic mapping in the Mountain Pass, California area using Advanced Spaceborne Thermal Emission and Reflection Radiometer (ASTER) data

Evaluation of an Advanced Spaceborne Thermal Emission and Reflection Radiometer (ASTER) image of the Mountain Pass, California area indicates that several important lithologic groups can be mapped in areas with good exposure by using spectral-matching techniques. The three visible and six near-infrared bands, which have 15-m and 30-m resolution, respectively, were calibrated by using in situ measurements of spectral reflectance. Calcitic rocks were distinguished from dolomitic rocks by using matched-filter processing in which image spectra were used as references for selected spectral categories. Skarn deposits and associated bright coarse marble were mapped in contact metamorphic zones related to intrusion of Mesozoic and Tertiary granodioritic rocks. Fe-muscovite, which is common in these intrusive rocks, was distinguished from Al-muscovite present in granitic gneisses and Mesozoic granite. Quartzose rocks were readily discriminated, and carbonate rocks were mapped as a single broad unit through analysis of the 90-m resolution, five-band surface emissivity data, which is produced as a standard product at the EROS Data Center. Three additional classes resulting from spectral-angle mapper processing ranged from (1) a broad granitic rock class (2) to predominately granodioritic rocks and (3) a more mafic class consisting mainly of mafic gneiss, amphibolite and variable mixtures of carbonate rocks and silicate rocks. ?? 2002 Elsevier Science Inc. All rights reserved.

Remote Sensing of Environment↗

USGS2003

Mapping mine wastes and analyzing areas affected by selenium-rich water runoff in southeast Idaho using AVIRIS imagery and digital elevation data

Remotely sensed hyperspectral and digital elevation data from southeastern Idaho are combined in a new method to assess mine waste contamination. Waste rock from phosphorite mining in the area contains selenium, cadmium, vanadium, and other metals. Toxic concentrations of selenium have been found in plants and soils near some mine waste dumps. Eighteen mine waste dumps and five vegetation cover types in the southeast Idaho phosphate district were mapped by using Airborne Visible-Infrared Imaging Spectrometer (AVIRIS) imagery and field data. The interaction of surface water runoff with mine waste was assessed by registering the AVIRIS results to digital elevation data, enabling determinations of (1) mine dump morphologies, (2) catchment watershed areas above each mine dump, (3) flow directions from the dumps, (4) stream gradients, and (5) the extent of downstream wetlands available for selenium absorption. Watersheds with the most severe selenium contamination, such as the South Maybe Canyon watershed, are associated with mine dumps that have large catchment watershed areas, high stream gradients, a paucity of downstream wetlands, and dump forms that tend to obstruct stream flow. Watersheds associated with low concentrations of dissolved selenium, such as Angus Creek, have mine dumps with small catchment watershed areas, low stream gradients, abundant wetlands vegetation, and less obstructing dump morphologies. ?? 2002 Elsevier Science Inc. All rights reserved.

Remote Sensing of Environment↗

USGS2003

Mapping vegetation in Yellowstone National Park using spectral feature analysis of AVIRIS data

Knowledge of the distribution of vegetation on the landscape can be used to investigate ecosystem functioning. The sizes and movements of animal populations can be linked to resources provided by different plant species. This paper demonstrates the application of imaging spectroscopy to the study of vegetation in Yellowstone National Park (Yellowstone) using spectral feature analysis of data from the Airborne Visible/Infrared Imaging Spectrometer (AVIRIS). AVIRIS data, acquired on August 7, 1996, were calibrated to surface reflectance using a radiative transfer model and field reflectance measurements of a ground calibration site. A spectral library of canopy reflectance signatures was created by averaging pixels of the calibrated AVIRIS data over areas of known forest and nonforest vegetation cover types in Yellowstone. Using continuum removal and least squares fitting algorithms in the US Geological Survey's Tetracorder expert system, the distributions of these vegetation types were determined by comparing the absorption features of vegetation in the spectral library with the spectra from the AVIRIS data. The 0.68 μm chlorophyll absorption feature and leaf water absorption features, centered near 0.98 and 1.20 μm, were analyzed. Nonforest cover types of sagebrush, grasslands, willows, sedges, and other wetland vegetation were mapped in the Lamar Valley of Yellowstone. Conifer cover types of lodgepole pine, whitebark pine, Douglas fir, and mixed Engelmann spruce/subalpine fir forests were spectrally discriminated and their distributions mapped in the AVIRIS images. In the Mount Washburn area of Yellowstone, a comparison of the AVIRIS map of forest cover types to a map derived from air photos resulted in an overall agreement of 74.1% (kappa statistic=0.62).

Wyoming↗

USGS2003

Monitoring vegetation phenology using MODIS

Accurate measurements of regional to global scale vegetation dynamics (phenology) are required to improve models and understanding of inter-annual variability in terrestrial ecosystem carbon exchange and climate–biosphere interactions. Since the mid-1980s, satellite data have been used to study these processes. In this paper, a new methodology to monitor global vegetation phenology from time series of satellite data is presented. The method uses series of piecewise logistic functions, which are fit to remotely sensed vegetation index (VI) data, to represent intra-annual vegetation dynamics. Using this approach, transition dates for vegetation activity within annual time series of VI data can be determined from satellite data. The method allows vegetation dynamics to be monitored at large scales in a fashion that it is ecologically meaningful and does not require pre-smoothing of data or the use of user-defined thresholds. Preliminary results based on an annual time series of Moderate Resolution Imaging Spectroradiometer (MODIS) data for the northeastern United States demonstrate that the method is able to monitor vegetation phenology with good success.

Remote Sensing of Environment↗

USGS2003

Calibration of remotely sensed, coarse resolution NDVI to CO2 fluxes in a sagebrush–steppe ecosystem

The net ecosystem exchange (NEE) of carbon flux can be partitioned into gross primary productivity (GPP) and respiration ( R ). The contribution of remote sensing and modeling holds the potential to predict these components and map them spatially and temporally. This has obvious utility to quantify carbon sink and source relationships and to identify improved land management strategies for optimizing carbon sequestration. The objective of our study was to evaluate prediction of 14-day average daytime CO 2 fluxes ( F day ) and nighttime CO 2 fluxes ( R n ) using remote sensing and other data. F day and R n were measured with a Bowen ratio–energy balance (BREB) technique in a sagebrush ( Artemisia spp.)–steppe ecosystem in northeast Idaho, USA, during 1996–1999. Micrometeorological variables aggregated across 14-day periods and time-integrated Advanced Very High Resolution Radiometer (AVHRR) Normalized Difference Vegetation Index (iNDVI) were determined during four growing seasons (1996–1999) and used to predict F day and R n . We found that iNDVI was a strong predictor of F day ( R 2 =0.79, n =66, P <0.0001). Inclusion of evapotranspiration in the predictive equation led to improved predictions of F day ( R 2 =0.82, n =66, P <0.0001). Crossvalidation indicated that regression tree predictions of F day were prone to overfitting and that linear regression models were more robust. Multiple regression and regression tree models predicted R n quite well ( R 2 =0.75–0.77, n =66) with the regression tree model being slightly more robust in crossvalidation. Temporal mapping of F day and R n is possible with these techniques and would allow the assessment of NEE in sagebrush–steppe ecosystems. Simulations of periodic F day measurements, as might be provided by a mobile flux tower, indicated that such measurements could be used in combination with iNDVI to accurately predict F day . These periodic measurements could maximize the utility of expensive flux towers for evaluating various carbon management strategies, carbon certification, and validation and calibration of carbon flux models.

Idaho↗