USGS Science⌕ Search

SEARCH · USGS Science

Results for “Marine and Petroleum Geology”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

267 records · Page 15Linked to original sources
USGS2007

Upper cretaceous microbial petroleum systems in north-central Montana

Cenomanian to Campanian rocks of north-central Montana contain shallow economic accumulations of dry natural gas derived from microbial methanogenesis. The methanogens utilized carbon dioxide derived from organic matter in the marginal marine sediments and hydrogen from in situ pore water to generate methane. The most recent USGS assessment of the shallow gas resources of eastern Montana used a petroleum systems approach, identifying the critical components of a petroleum system (source rock, reservoir rock, seal rock, and trap) and their temporal relationships. As a part of this effort, geochemical data from natural gas wells and associated formation waters were used to identify two microbial gas systems and the timing of methanogenesis. Two microbial gas families are identified in north-central Montana based on stable carbon isotope and gas composition. The Montana Group gas family has heavier δ 13 C methane values, slightly lighter δD methane values, and a lower carbon dioxide and nitrogen content than the Colorado Group gas family. The two gas families may reflect, in part, the source rock depositional environments, with the Colorado Group rocks representing a more offshore marine depositional environment and the Montana Group rocks representing proximal marine, deltaic and nonmarine depositional environments. Assuming the gas families reflect only source rock characteristics, two microbial petroleum systems can be defined. The first petroleum system, called the Colorado Group microbial gas system, consists of Colorado Group rocks with the shales in the Belle Fourche Formation, Greenhorn Formation, and the Carlile Shale as the presumed source rocks and the interbedded Phillips and Bowdoin sandstones and the Greenhorn Formation limestones as reservoirs. The second petroleum system, called the Montana Group microbial gas system, consists of the Montana Group rocks that include the Gammon Shale and possibly the Claggett Shale as source rocks and the Eagle Sandstone and the Judith River Formation as reservoirs. The Niobrara Formation is tentatively placed in the former system. The geographic extent of the two microbial systems is much larger than the study area and includes an area at least from the Alberta basin to the northwest to the Powder River basin to the southeast. Upper Cretaceous microbial gas accumulations have been recognized along these basin margins at burial depths less than 3000 ft, but have not been recognized within the deeper parts of the basins because subsequent charge of thermogenic oil and gas masks the preexisting microbial gas accumulations. Methanogenesis began soon after the deposition (early-stage methanogenesis) of the Cenomanian to Campanian source sediments, and was either sustained or rejuvenated by episodic meteoric water influx until sometime in the Paleogene. Methanogenesis probably continued until CO 2 and hydrogen were depleted or the pore size was compacted to below tolerance levels of the methanogens. The composition of the Montana and Colorado Group gases and coproduced formation water precludes a scenario of late-stage methanogenesis like the Antrim gas system in the Michigan basin. Some portion of the methane charge was originally dissolved in the pore waters, and subsequent reduction in hydrostatic pressure caused the methane to exsolve and migrate into local stratigraphic and structural traps. The critical moment of the microbial gas systems is this timing of exsolution rather than the time of generation (methanogenesis). Other studies suggest that the reduction in hydrostatic pressure may have been caused by multiple geologic events including the lowering of sea level in the Late Cretaceous, and subsequent uplift and erosion events, the youngest of which began about 5 Ma.

Montana↗
USGS1951

Preliminary report on the stratigraphy and structure of the Shaviovik and upper Sagavanirktok Rivers area, Alaska

During the 1951 field season, U. S. Geological Survey Navy Oil Unit party 1 conducted stratigraphic and structural studies of the rocks in the area between the westernmost fork of the Shaviovik River and the East Kuparuk River. This area is drained by the Sagavanirktok River and its major tributaries; the Echooka River, the Ivishak River, and Lupine River. Owing to the nature of the investigation, the studies were confined to a relatively narrow geographic strip, rarely exceeding a distance of 20 miles north of the northernmost occurrence of the Lisburne limestone of the Brooks Range province. The work was thus conducted in an area of approximately 2,000 square miles, which lies wholly within the Brooks and Arctic Foothill provinces; within this area approximately 1,000 square miles was mapped geologically. The party consisted of six men: A. S. Keller and R. L. Detterman, geologists; I. W. Marine and D. E. Reed, field assistants; L. G. Barbin, cook-field assistant; and T. F. Derrington, weasel mechanic. The party utilized 3 weasels for transportation of equipment and personnel during the season, during which time 15 camps ware established. Work was initiated on the Shaviovik River on May 24, 1951, and the party concluded its investigations on the Kuparuk River drainage on August 24, 1951. In 1947, G. Gryc and E. H. Lathram conducted reconnaissance studies of the rocks in the vicinity of camps 12-15 (pl. 1); and during the same year, G. Gryn visited outcrops on the Ivishak River in the vicinity of camps 6-7 (pl. 1). These studies were made by the Navy Oil Unit of the U. S. Geological Survey in conjunction with the investigations of NPR-4. No other work of a geologic nature had been done in the area in the past. The primary objective of the 1951 party was the correlation of the Mesozoic and upper Paleozoic strata of the foothills province west of the Itkillik River, with that of the Shaviovik and Canning Rivers region. A secondary objective was to determine the cause of the pronounced northeasterly swing in the trend of the Brooks Range front in the Sagavanirktok drainage and to determine the structural implications of this swing. The area was mapped at a scale of 1:20,000 on vertical photographs and transferred to trimetrogon drainage maps at a scale of 1:48,000 and 1:96, 00. An altimeter traverse was carried concurrently with the geologic mapping.

Alaska↗
USGS1982

Assessment of the petroleum, coal, and geothermal resources of the Economic Community of West African States (ECOWAS) region

Approximately 85 percent of the land area of the ECOWAS (Economic Community of West African States) region is covered by basement rocks (igneous and highly metamorphosed rocks) or relatively thin layers of Paleozoic, Upper Precambrian, and 'Continental Intercalaire? sedimentary rocks. These areas have little or no petroleum potential. Areas of the ECOWAS region that have potential for petroleum production or potential for increased petroleum production include the narrow belt of sedimentary rocks that stretches along the continental margin from Mauritania to Nigeria and the Niger Delta and the Benue depression. The Senegal Basin, located on the continental margin of Mauritania, Senegal, Gambia, Guinea Bissau, and Guinea, has been intensely explored by the oil industry and most of the larger structures onshore and on the shelf probably have been tested by drilling with little or no resulting commercial production. Unless basic ideas pertaining to the petroleum geology of the Senegal Basin are revised, future discoveries are expected to be limited to small fields overlooked by industry at a time when petroleum prices were low. On the continental shelf of Sierra Leone and the continental shelf of northeast and central Liberia, the sedimentary rocks are relatively thin, and industry has shown little interest in the area. On the continental rise of these countries, however, the sedimentary section, deposited in a complex fault-block system, increases in thickness. A renewal of industry interest in this deep-water area will probably follow further development of deep-water production technology. A recent oil discovery on the continental slope off the Ivory Coast is expected to spur further exploration offshore of southeastern Liberia, Ivory Coast, Ghana, Togo, and Benin. This relatively unexplored area in the Gulf of Guinea has good possibilities .for the discovery of giant oil fields. Nigeria's oil development from the Niger Delta may have peaked, as 13 of 14 giant oil fields were discovered prior to 1969 and the greatest number of fields were discovered in the period 1965 through 1967. Like delta regions in other parts of the world, individual oil fields of the Niger Delta are small to medium by world standards and future discoveries, therefore, are likely to reflect this reality. The natural gas resources of the Niger Delta, unlike its oil resources, are comparatively underdeveloped. Parts of the Benue depression in Nigeria and Niger could contain significant deposits of petroleum. The lower Benue depression, immediately north of the Niger Delta, has been extensively explored by drilling. Except for noncommercial discoveries of oil and gas and traces of oil and gas on the ground surface, the results of exploration in the lower Benue depression were negative. However, in the Lake Chad area of Chad and in southern Chad near the Central African Republic boundary, oil and gas discoveries were made just prior to the cessation of all drilling and exploration activity in early 1979. It is rumored that these discoveries may be large although little information is available. The relation between the two areas in Chad and their overall relation to the Benue depression is poorly understood; however, the possibility of thick sedimentary sections containing Cretaceous marine source rock and Tertiary reservoir beds-all contained within grabens in a highly faulted failed-arm system subjected to high heat flow--is attractive. Of the ECOWAS countries, only Nigeria and Niger produce coal commercially. Nigeria produces subbituminous coal from Paleocene-Maestrichtian and Maestrichtian (Late Cretaceous) age rocks of the Niger Delta region; reserves are estimated, on the basis of extensive drilling, to be 350 million tons (standard coal equivalent). In addition, lignite deposits of the Niger Delta appear to be large but have not been developed. Niger produces small amounts of coal used locally by uranium mine and mill operations from C

Open-File Report↗
USGS2023

Methane pore accessibility, densification, and accommodation by organic matter in the Niobrara Formation at wet-gas thermal maturity conditions

Petroleum within unconventional source-rock reservoirs is hosted in organic matter and mineral pore space as well as in voids and microfractures. Recent work has shown that for source-rock reservoirs in the dry gas window, significant portions of methane (CH 4 ), the main component of petroleum at elevated maturities, can be stored within fine (<5 nm) organic matter porosity. However, within reservoirs at lower thermal maturities (e.g., peak oil or wet-gas conditions), the distribution and behavior of CH 4 and the higher alkanes that comprise gas condensates across pore sizes is unclear, especially for pores with diameters <50 nm. Understanding CH 4 distribution within these settings provides insight for petroleum generation, movement, and recoverability, ultimately enabling increased accuracy of estimated ultimate recovery. Here wide Q-range total neutron scattering was used to evaluate perdeuterated methane (CD 4 ) behavior at reservoir pressures (200–750 bar) and temperature (60 °C) in a sample at the late oil/wet gas thermal maturity stage from the Late Cretaceous Niobrara Formation, an active petroleum producing formation within the Denver-Julesburg Basin, U.S. Neutron scattering data show that mesopores within the Niobrara Formation sample exhibit mass fractal scattering, similar to previously measured U.S. marine shale samples. In the presence of CD 4 , scattering intensities between Q = 0.02–0.1 Å −1 (corresponding to nominal pore diameters from 25 to 5 nm, respectively) decrease with increased pressure up to 750 bar where at least 80% of all pores with ~25 nm diameters are CD 4 accessible. In contrast, between Q = 0.1–1 Å −1 (corresponding to nominal pore diameters from 5 to 0.5 nm, respectively), scattering intensity initially increased at the lowest CD 4 pressure tested (200 bar) before decreasing with increasing pressure. These signal fluctuations with CD 4 pressure are interpreted to arise from the creation of pores with diameters <5 nm, likely through deformation of solid bitumen by supercritical CD 4 , and/or the incorporation of CD 4 within sample organic matter. This new porosity represents an increase of at least ~8% in available pore volume within the sample, although the majority of these pores do not persist following removal of CD 4 . Additionally, there is strong evidence for densification of CD 4 within the sample indicated by a shift in the CD 4 intermolecular scattering peak to higher Q-values compared to bulk CD 4 . These results provide insight into fluid properties within source-rock reservoirs at late oil/wet gas thermal maturities, especially as they relate to organic porosity interconnectivity, and are discussed with perspective toward pressure management of gas condensate wells.

Colorado, Kansas, Nebraska, Wyoming↗
USGS1981

Northwest margin of California continental borderland: Marine geology and tectonic evolution

The northwest margin of the California continental borderland consists mainly of two northwest-trending pre-Neogene lithologic belts blanketed by Miocene and younger strata. These belts, which are lithologically and structurally correlated with the Franciscan Complex and Great Valley sequence of northern California, are interpreted to represent facies corresponding to the subduction complex and forearc-basin deposits of a late Mesozoic and Paleogene continental-margin arc-trench system. The outer belt, which forms the acoustic basement underlying the continental slope and Patton Ridge, is characterized by: (1) moderately high compressional velocities (5.1 to 6.2 km/sec), (2) discordant and discontinuous seismic reflectors, and (3) nonfossiliferous and diverse rock types t at range in metamorphic grade from zeolite-bearing arkosic sandstone to blueschist. Landward, the inner Great Valley sequence belt underlies Santa Rosa-Cortes Ridge and Santa Cruz and San Nicolas Basins; in contrast to the outer belt, this belt is characterized by: (1) intermediate compressional velocities (4.5 to 4.6 km/sec), (2) concordant and relatively continuous reflectors, and (3) a thick turbidite sequence of relatively undeformed and unmetamorphosed fossiliferous Cretaceous and Paleogene strata. The inner belt overlies a 6.6-km/sec layer that is probably oceanic crust, a relation consistent with the hypothesis that trapped old oceanic crust underlies the forearc basins along parts of some convergent margins. Well-developed wrench-fault structures in overlying Miocene strata record a transition from Paleogene subduction to Neogene transform faulting. Related events include widespread andesitic to dacitic volcanism and concurrent uplift and erosion of Miocene and older rocks. The proximity of these Miocene silicic volcanic rocks to the paleotrench (< 20 km) is best explained as resulting from passage of the southward-migrating Rivera ridge-fault-trench triple junction along the margin. On the basis of the age of the adjacent sea floor, passage of this triple junction occurred about 17 m.y. ago, a date that corresponds closely to the inception of volcanism and uplift in the northwest margin of the borderland. A widespread unconformity that separates highly deformed lower and lower middle iocene strata from relatively undeformed younger strata is assumed to mark the subsequent onset of wrench faulting. The timing of volcanism and uplift, and of the slightly younger wrenching event, closely matches the plate-tectonic model of Atwater and Molnar if the northwest margin of the borderland is restored to an earlier tectonic setting off Baja California, approximately 260 km southeast of its present position.

California↗
USGS2005

Mudstone sedimentation at high latitudes: Ice as a transport medium for mud and supplier of nutrients

Controls on mudstone deposition at high latitudes are poorly known relative to low latitudes. In recent sediments deposited in these environments, ice significantly influences sediment transport and primary productivity. The products of ice transport are relatively well known in glacimarine settings, but are less well known from below melting sea ice. This latter setting is significant as today it is associated with high primary organic productivity. The aim of this study is to assess how sea ice might have controlled lithofacies variability and organic-matter distribution and preservation in an ancient marine, siliciclastic mudstone-dominated succession deposited at high latitudes. Combined sedimentary logging, optical and electron optical (back-scatte red electron imagery), geochemical, and isotopic methods were used to determine sample variability in forty-five samples collected from the Lower Cretaceous succession in the Mikkelsen Bay State #1 borehole (North Slope, Alaska). The succession overall fines upward and contains muddy sandstones and sand- and silt-bearing, clay-rich mudstones towards its base in contrast to clay-rich and clay-dominated mudstones towards its top. Some of the mudstone units exhibit thin (< 5 mm), relic-beds that fine upward weakly. In some units small (0.5 mm), bed-parallel silt-filled microburrows disrupt depositional laminae whereas in others pervasive burrowing completely obliterates original depositional textures. Many of the units are pelleted. These mudstones are unusual in that they contain minor but very striking outsize grains, composed of subrounded to rounded sand and granule-size material. In addition, they are good petroleum source rocks, with between 2.8 and 5.9 wt % total organic carbon, of predominantly Type II kerogen. The organic matter has an isotopic signature ranging from -25.4??? ??13C to -28.1??? ??13C. Thin tuffs (< 20 mm) and carbonate-cemented units are also present. Given the absence of significant polar ice in the Early Cretaceous the outsized grains are interpreted to have been deposited from a combination of melting, dirty anchor, and fast ice. The mud fraction, which forms the bulk of the sediment, is interpreted to have been deposited from melting, sediment-laden frazil ice, and fast ice. After deposition sediments were partially reworked by bottom currents generated by brine rejection during sea ice formation. Sympagic organisms, grazing on algae and bacteria both within and below the ice, pelleted the sediment. Bioturbation, which varies through the succession, indicates that sedimentation probably occurred beneath a predominantly oxic or dysoxic water column. In this setting productivity was fueled by nutrients released from melting sea ice in the marginal ice zone. The good petroleum source potential of these mudstones is attributed to high organic productivity coupled to episodic and rapid sedimentation rather than existence of bottom-water anoxia linked to upwelling. Because sea-ice rafting was probably the dominant sediment transport mechanism it is not appropriate to use sequence stratigraphic methodology to predict lithofacies variability in this environment. Copyright ?? 2005, SEPM (Society for Sedimentary Geology).

Journal of Sedimentary Research↗
USGS2018

Analysis of groundwater response to tidal fluctuations, Operable Unit 2, Area 8, Naval Base Kitsap, Keyport, Washington

Operable Unit 2, Area 8, at Naval Base Kitsap, Keyport is the site of a former chrome-plating facility that released metals (primarily chromium and cadmium), chlorinated volatile organic compounds, and petroleum compounds into the local environment. To ensure long-term protectiveness, as stipulated in the Fourth Five-Year Review for the site, Naval Facilities Engineering Command Northwest collaborated with the U.S. Environmental Protection Agency, the Washington State Department of Ecology, and the Suquamish Tribe, to collect data to monitor the contamination left in place and to ensure the site does not pose a risk to human health or the environment. To support these efforts, refined information was needed on the interaction of fresh groundwater with seawater in response to the up-to 13-ft tidal fluctuations at this nearshore site adjacent to Port Orchard Bay. The information was analyzed to meet the primary objective of this investigation, which was to determine the optimal time during the semi-diurnal and the neap-spring tidal cycles to sample groundwater for freshwater contaminants in Area 8 monitoring wells. Groundwater levels and specific conductance in five monitoring wells, along with marine water-levels (tidal levels) in Port Orchard Bay, were monitored every 15 minutes during a 3-week duration to determine how nearshore groundwater responds to tidal forcing. Time series data were collected from October 24, 2017, to November 16, 2017, a period that included neap and spring tides. Vertical profiles of specific conductance were also measured once in the screened interval of each well prior to instrument deployment to determine if a freshwater/saltwater interface was present in the well during that particular time. The vertical profiles of specific conductance were measured only one time during an ebbing tide at approximately the top, middle, and bottom of the saturated thickness within the screened interval of each well. The landward-most well, MW8-8, was completely freshwater, while one of the most seaward wells, MW8-9, was completely saline. A distinct saltwater interface was measured in the three other shallow wells (MW8-11, MW8-12, and MW8-14), with the topmost groundwater occurring fresh underlain by higher conductivity water. Lag times between minimum spring-tide level and minimum groundwater levels in wells ranged from about 2 to 4.5 hours in the less-than 20-ft deep wells screened across the water table, and was about 7 hours for the single 48-ft deep well screened below the water table. Those lag times were surprisingly long considering the wells are all located within 200-ft of the shoreline and the local geology is largely coarse-grained glacial outwash deposits. Various manmade subsurface features, such as slurry walls and backfilled excavations, likely influence and confuse the connectivity between seawater and groundwater. The specific-conductance time-series data showed clear evidence of substantial saltwater intrusion into the screened intervals of most shallow wells. Unexpectedly, the intrusion was associated with the neap part of the tidal cycle around November 13–16, when relatively low barometric pressure and high southerly winds led to the highest high and low tides measured during the monitoring period. The data consistently indicated that the groundwater had the lowest specific conductance (was least mixed with seawater) during the prior neap tides around October 30, the same period when the shallow groundwater levels were lowest. Although the specific conductance response is somewhat different between wells, the data do suggest that it is the heights of the actual high-high and low-low tides, regardless of whether or not they occur during the neap or spring part of the cycle, that allows seawater intrusion into the nearshore aquifer at Area 8. With all the data taken into consideration, the optimal time for sampling the shallow monitoring wells at Area 8 would be centered on a 2–5-hour period following the predicted low-low tide during neap tide, with due consideration of local atmospheric pressure and wind conditions that have the potential to generate tides that can be substantially higher than those predicted from lunar-solar tidal forces. The optimal time for sampling the deeper monitoring wells at Area 8 would be during the 6–8-hour period following a predicted low-low tide, also during the neap tide part of the tidal cycle. The specific time window to sample each well following a low tide can be found in table 5. Those periods are when groundwater in the wells is most fresh and least diluted by seawater intrusion. In addition to timing, consideration should be given to collecting undisturbed samples from the top of the screened interval (or top of the water table if below the top of the interval) to best characterize contaminant concentrations in freshwater. A downhole conductivity probe could be used to identify the saltwater interface, above which would be the ideal depth for sampling.

Washington↗
USGS1979

Geological studies of the COST GE-1 well, United States South Atlantic outer continental shelf area

The COST No. GE-1 well is the first deep stratigraphic test to be drilled in the southern part of the U.S. Atlantic Outer Continental Shelf (AOCS) area. The well was drilled within the Southeast Georgia Embayment to a total depth of 13,254 ft (4,040 m). It penetrated a section composed largely of chalky limestones to a depth of about 3,300 ft (1,000 m) below the drill platform. Limestones and calcareous shales with some dolomite predominate between 3,300 and 7,200 ft (1,000 and 2,200 m), whereas interbedded sandstones and shales are dominant from 7,200 to 11,000 ft (2,200 to 3,350 m). From 11,000 ft (3,350 m) to the bottom, the section consists of highly indurated to weakly metamorphosed pelitic sedimentary rocks and meta-igneous flows or intrusives. Biostratigraphic examination has shown that the section down to approximately 3,500 ft (1,060 m) is Tertiary, the interval from 3,500 to 5,900 ft (1,060 to 1,800 m) is Upper Cretaceous, and the section from 5,900 to 11,000 ft (1,800 to 3,350 m) is apparently Lower Cretaceous. The indurated to weakly metamorphosed section below 11,000 ft (3,350 m) is barren of fauna or flora but is presumed to be Paleozoic based on radiometric age determinations. Rocks deposited at upper-slope water depths were encountered in the Upper Cretaceous, Oligocene, and Miocene parts of the section. All other units were deposited in outer-shelf to terrestrial environments. Examination of cores, well cuttings, and electric logs shows that potential hydrocarbon-reservoir units are present within the chalks in the uppermost part of the section as well as in sandstone beds to a depth of at least 10,000 ft (3,000 m). Sandstones below that depth, and the metamorphic section between 11,000 and 13.250 ft (3,350 and 4,040 m) have extremely low permeabilities and are unlikely to contain potential reservoir rock. Studies of organic geochemistry, vitrinite reflectance, and color alteration of visible organic matter indicate that the chalk section down to approximately 3,600 ft (1,100 m) contains low concentrations of indigenous hydrocarbons, is thermally immature, and has a very poor source-rock potential. The interval from 3,600 to 5,900 ft (1,100 to 1,800 m) has a high content of marine organic matter but appears to be thermally immature. Where buried more deeply, this interval may have significant potential as an oil source. The section from 5,900 to 8,850 ft (1,800 to 2,700 m) has geochemical characteristics indicative of a poor oil source rock and is thermally immature. Rocks below this depth, although they may be marginally to fully mature, are virtually barren of organic matter and thus have little or no source-rock potential. Therefore, despite the thermal immaturity of the overall section, the uppor half of the sedimentary section penetrated in the well shows the greatest petroleum source potential.

Circular↗
USGS1980

Sedimentary and structural patterns on the northern Santa Rosa-Cortes Ridge, southern California

The Santa Rosa-Cortes Ridge is an 1800 m high, 180 km long feature lying approximately 90 km off the coast of southern California and directly south of the northern group of Channel Islands. Geophysical profiling and sampling cruises to the northern part of the ridge, an area of recent and future lease sales for petroleum development, provide a strong data base for interpretation of structural and sedimentary patterns and their relation to potential geologic hazards. The northern part of the ridge is a complexly folded and faulted northwest-trending anticlinorium composed mostly of lower and middle Miocene shale and mudstone. Erosional remnants of upper Miocene and Pliocene rocks unconformably overlie highly folded pre-upper Miocene strata. The major structure of the ridge developed almost continuously from Oligocene or early Miocene time to the end of the Tertiary; many small folds formed between post-late Miocene and pre-late Pleistocene time. Numerous small faults cut the rocks on the ridge top. Faults cut basement rocks on the west side of the ridge along the Ferrelo fault zone. Published data on historical epicenters and evidence of offsets on the seafloor from seismic reflection and side-scan profiles, including limited evidence of possible strike-slip movement along fault traces, indicate that the northern Santa Rosa-Cortes Ridge is tectonically active. The crest of the ridge was truncated as the result of repeated sea-level fluctuations in the Quaternary. A thin veneer of unconsolidated medium to fine sand, less than 3 m thick, mantles most of the ridge; locally in topographically low areas and on the upper flanks of the ridge, thickness exceeds 20 m. The meager sediment cover, coupled with available evidence of relatively strong currents flowing across the ridge top, indicate that the ridge is an area of nondeposition or winnowing of fine sediments. Modern sediments become thicker and finer-grained from the ridge top to the ridge flanks, suggesting active accretion in those areas. Slumps are present at various depths on the flanks, and it seems probable that the thicker deposits (> 20 m) of modern sediments on the upper flanks will be sites of future slumping.

California↗
USGS2025

Confocal laser-scanning microscopy (CLSM)-based thermal maturity of Tasmanites and progress in standardization of fluorescence microspectrometry

Evaluation of thermal maturity in vitrinite-free or vitrinite-deficient sediments via fluorescence microspectrometry can provide relevant information related to petroleum exploration and thermal history assessment. However, variation in spectral fluorescence properties of alginite macerals with increasing thermal maturity is largely underexplored. Here, authors of this study have applied confocal laser-scanning microscopy (CLSM) in conjunction with fluorescence microspectrometry to a maturity series of marine Upper Devonian Tasmanites algae from the Ohio Shale (Huron Member) and a single sample from the Marcellus Formation of the Appalachian Basin. Spectral fluorescence properties of Tasmanites were evaluated in relation to orientation, measurement location, and the number of measurements per sample, and were compared to published literature. Emission spectra of Tasmanites from continuous wave laser excitation (405 nm) were acquired from sections perpendicular and parallel to bedding and at different positions within individual Tasmanites bodies. The results showed a progressive red-shift in emission maxima (λ max ) in a large sample sized maturity series ( N = 19), e.g., 493 to 578 nm for the perpendicular section at middle position. Further, blue-shifted apex and mineral-adjacent positions within sections perpendicular to bedding were observed, with the latter being reported here for the first time. While blue-shift at apex positions can be attributed to mechanical deformation-induced reorientation of photoselected fluorophores, the blue-shifted mineral-adjacent positions could result from strain loading and development of a plastic deformation region at the mineral contact zone with Tasmanites . A decrease in standard deviation with increasing number of measured emission maxima is well-observed, and 15 to 20 individual measurements per sample appears sufficient for low standard deviation and coefficient of variance. CLSM-derived thermal maturity parameters indicated that a moderate positive correlation of red/green quotient (Q 650/500 ; R 2 = 0.67) with solid bitumen reflectance (BR o in %) exists. For reproducible results, the determination of λ max and Q 650/500 should be conducted exclusively in the middle position at perpendicular and parallel sections of the polished whole-rock pellets, where the lowest standard deviation in measurement was observed. These results strengthen the suitability and relevance of the CLSM technique in thermal maturity studies of dispersed organic matter (DOM) and contribute to the standardization of fluorescence microspectrometry methods in organic petrology investigation.

Kentucky, Ohio, Virginia, West Virginia↗
USGS2002

Unconventional shallow biogenic gas systems

Unconventional shallow biogenic gas falls into two distinct systems that have different attributes. Early-generation systems have blanketlike geometries, and gas generation begins soon after deposition of reservoir and source rocks. Late-generation systems have ringlike geometries, and long time intervals separate deposition of reservoir and source rocks from gas generation. For both types of systems, the gas is dominantly methane and is associated with source rocks that are not thermally mature. Early-generation biogenic gas systems are typified by production from low-permeability Cretaceous rocks in the northern Great Plains of Alberta, Saskatchewan, and Montana. The main area of production is on the southeastern margin of the Alberta basin and the northwestern margin of the Williston basin. The huge volume of Cretaceous rocks has a generalized regional pattern of thick, non-marine, coarse clastics to the west and thinner, finer grained marine lithologies to the east. Reservoir rocks in the lower part tend to be finer grained and have lower porosity and permeability than those in the upper part. Similarly, source beds in the units have higher values of total organic carbon. Patterns of erosion, deposition, deformation, and production in both the upper and lower units are related to the geometry of lineament-bounded basement blocks. Geochemical studies show that gas and coproduced water are in equilibrium and that the fluids are relatively old, namely, as much as 66 Ma. Other examples of early-generation systems include Cretaceous clastic reservoirs on the southwestern margin of Williston basin and chalks on the eastern margin of the Denver basin. Late-generation biogenic gas systems have as an archetype the Devonian Antrim Shale on the northern margin of the Michigan basin. Reservoir rocks are fractured, organic-rich black shales that also serve as source rocks. Although fractures are important for production, the relationships to specific geologic structures are not clear. Large quantities of water are coproduced with the gas, and geochemical data indicate that the water is fairly fresh and relatively young. Current thinking holds that biogenic gas was generated, and perhaps continues to be, when glacial meltwater descended into the plumbing system provided by fractures. Other examples of late-generation systems include the Devonian New Albany Shale on the eastern margin of the Illinois basin and the Tertiary coalbed methane production on the northwestern margin of the Powder River basin. Both types of biogenic gas systems have a similar resource development history. Initially, little technology is used, and gas is consumed locally; eventually, sweet spots are exploited, widespread unconventional reservoirs are developed, and transport of gas is interstate or international. However, drilling and completion techniques are very different between the two types of systems. Early-generation systems have water-sensitive reservoir rocks, and consequently water is avoided or minimized in drilling and completion. In contrast, water is an important constituent of late-generation systems; gas production is closely tied to dewatering the system during production. Existing production and resource estimates generally range from 10 to 100 tcf for both types of biogenic gas systems. Although both system types are examples of relatively continuous accumulations, the geologic frameworks constrain most-economic production to large geologic structures on the margins of basins. Shallow biogenic gas systems hold important resources to meet the increased domestic and international demands for natural gas.

American Association of Petroleum Geologists Bulle↗
USGS1989

Geologic framework of the offshore region adjacent to Delaware

Several multichannel, common depth point (CDP) seismic reflection profiles concentrated in the area of the entrance to Delaware Bay provide a tie between the known onshore geology of the Coastal Plain of Delaware and the offshore geology of the Baltimore Canyon Trough. The data provide a basis for understanding the geologic framework and petroleum resource potential of the area immediately offshore Delaware. Our research has focused on buried early Mesozoic rift basins and their geologic history. Assuming that the buried basins are analogous to the exposed Newark Supergroup basins of Late Triassic-Early Jurassic age, the most likely possibility for occurrence of hydrocarbon source beds in the area of the landward margin of the Baltimore Canyon Trough is presumed to be lacustrine, organic-rich shales probably present in the basins. Although buried basins mapped offshore Delaware are within reach of drilling, no holes have been drilled to date; therefore, direct knowledge of source, reservoir, and sealing beds is absent. Buried rift basins offshore Delaware show axial trends ranging from NW-SE to NNE-SSW. Seismic reflection profiles are too widely spaced to delineate basin boundaries accurately. Isopleths of two-way travel time representing basin fill suggest that, structurally, the basins are grabens and half-grabens. As shown on seismic reflection profiles, bounding faults of the basins intersect or merge with low-angle fault surfaces that cut the pre-Mesozoic basement. The rift basins appear to have formed by Mesozoic extension that resulted in reverse motion on reactivated basement thrust faults that originated from compressional tectonics during the Paleozoic. Computer-plotted structure contour maps derived from analysis of seismic reflection profiles provide information on the burial history of the rift basins. The postrift unconformity bevels the rift basins and, in the offshore area mapped, ranges from 2000 to 12,000 m below present sea level. The oldest postrift sediments that cover the more deeply buried rift basins are estimated to be of Middle Jurassic age (Bajocian-Bathonian), the probable time of opening of the Atlantic Ocean basin and onset of continental drift about 175–180 m.y. ago. By late Oxfordian-early Kimmeridgian time, the less deeply buried basins nearshore Delaware had been covered. A time-temperature index of maturity plot of one of the basins indicates that only dry gas would be present in reservoirs in synrift rocks buried by more than 6000 m of postrift sediments and in the oldest (Bathonian?-Callovian?) postrift rocks. Less deeply buried synrift rocks landward of the basin modeled might still be within the oil generation window.

Marine Geology↗
USGS1975

Sediments, structural framework, petroleum potential, environmental conditions, and operational considerations of the United States South Atlantic Outer Continental Shelf

The area designated for possible oil and gas lease sale in Bureau of Land Management memorandum 3310 #43 (722) and referred to therein as part of the United States South Atlantic Outer Continental Shelf (OCS) contains about 98,000 square kilometres of the continental margin seaward of the 3 mile offshore limit and within the 600 metre isobath. The designated area, offshore of North Carolina, South Carolina, Georgia, and Florida, encompasses parts of three physiographic provinces: the Continental Shelf, the Florida-Hatteras Slope, and the Blake Plateau. The structural framework of the U.3. South Atlantic region is dominated by the Southeast Georgia Embayment --an east-plunging depression recessed into the Atlantic Coastal Plain and shelf between Cape Fear, North Carolina and Jacksonville, Florida. The embayment is bounded to the north by the Cape Fear Arch and to southeast by the Peninsular Arch. Refraction data indicate a minor basement(?) ridge beneath the outer shelf between 30° and 32°N at 80°W. Drill hole data also suggest a gentle fold or accretionary structure (reef?) off the east coast of Florida. Several other structural features have been identified by refraction and reflection techniques and drilling. These are the Yamacraw Uplift, Burton High, Stone Arch, and the Suwannee Channel. Gravity and magnetic anomalies within the area probably result from emplacement of magma bodies along linear features representing fundamental crustal boundaries. Of these anomalies, the most prominent, is a segment of the East Coast Magnetic Anomaly which crosses the coast at Brunswick, Georgia. This anomaly has been interpreted as representing an ancient continental boundary where two formerly separate continental plates collided and were welded together. There may be as much as 5,000 m of sedimentary rocks in the Southeast Georgia Embayment out to the 600 m isobath. Basement rocks beneath the Southeast Georgia Embayment are expected to be similar to those exposed in the Appalachian Piedmont province. Triassic deposits are likely to exist beneath the inner Continental Shelf, and probably consist of nonmarine arkosic sandstones, shales, basalt flows, and diabase intrusions deposited in relatively narrow northeast-trending grabens. Jurassic marine carbonates in the Bahamas grade northward to carbonates, shales, sand, and arkose in North Carolina. Salt may be present in the basal Jurassic section in the Southeast Georgia Embayment. Up to 4,000 m of Jurassic-Lower Cretaceous rocks are expected out to the 600 m water depth. Lower Cretaceous rocks in southern Florida are shallow-water marine limestone and dolomites with beds of anhydrite. In coastal North Carolina the Lower Cretaceous is a marine section made up of shales, sand, and sandy limestone. The Upper Cretaceous is composed almost entirely of marine carbonates in southern Florida grading northward to nonmarine to marginal marine, sandstones and shales with minor amounts of carbonates. In general, Upper Cretaceous rocks will probably maintain a fairly constant thickness (600 m) on the Continental Shelf and grade downdip from terrigeneous sands and shales to more marine chalks, limestones, and dolomites. The Cenozoic rocks are predominantly shallow-water marine carbonates in Florida grading northward into a marginal marine to marine clastic facies composed of sands, marls, and limestones. The offshore Cenozoic section is expected to range in thickness from 600 to 1100 m.

Florida, Georgia, South Carolina↗
USGS1992

Impact origin of the Avak Structure, Arctic Alaska, and genesis of the Barrow gas fields

Geophysical and subsurface geologic data suggest that the Avak structure, which underlies the Arctic Coastal Plain 12 km southeast of Barrow, Alaska, is a hypervelocity meteorite or comet impact structure. The structure is a roughly circular area of uplifted, chaotically deformed Upper Triassic to Lower Cretaceous sedimentary rocks 8 km in diameter that is bounded by a ring of anastomosing, inwardly dipping, listric normal faults 12 km in diameter. A zone of gently outward-dipping sedimentary country rocks forms a discontinuous ring of "rim anticlines" within the peripheral ring of normal faults. Beyond these anticlines, the sedimentary rocks are almost flat-lying. Basement consists of strongly deformed Ordovician and Silurian argillite. Density and acoustic impedance con rasts between the argillite and the overlying strata produce gravity and seismic-reflection signatures that define a ring of anticlines around the disturbed zone and a structural high surrounded by an annular structural low at its center. In the adjacent Barrow gas fields, the tops of the informally named Neocomian "pebble shale" unit and the gas-producing Lower Jurassic Barrow sand (local usage) lie at average subsea depths of 488 m and 670 m, respectively. In the Avak 1 well, drilled on the central high, the pebble shale and the Barrow sand lie near the surface, documenting more than 500 m of relative uplift at the high. The cores in this well have steep dips (30-90 degrees), mixed breccia with Franklinian argillite clasts 10 and 90 m above basement, quartz grains with shock mosaicism and multiple sets of shock lamellae, oriented concussion fractures in sand-size quartz grains, and shatter cones resembling those found in the peripheral zones of well-documented impact structures. In addition, above-background levels o fractured quartz grains in Barrow sand were found as far as 19 km beyond the rim of the Avak structure. Data concerning the age of the Avak structure are not definitive. If submarine landslide deposits in the upper part of the Aptian and Albian Torok Formation, in the subsurface 200 km to the east, were triggered by the Avak event, then the Avak meteorite struck a submerged marine shelf about 100 + or - 5 Ma. However, the impact features found at Avak (shatter cones, concussion fractures, shock lamellae and shock mosaicism in quartz grains, and widespread cataclasis) characterize the distal zones of meteorite impact structures. Fused rocks, plastic deformation, and shock-metamorphic minerals found in more proximal zones of impact structures are apparently missing. These observations, and the lack of Avak ejecta in cuttings and cores from the Torok Formation and Nanushuk Group (Albian to middle Cenomanian) in surrounding test wells, indicate that the impact event postdated these beds. In this case, the Avak meteorite struck a Late Cretaceous or Tertiary marine shelf or coastal plain between the Cenomanian (ca. 95 Ma), and deposition of the basal beds of the overlying late Pliocene and Quaternary Gubik Formation (ca. 3 Ma).

Alaska↗
USGS1995

Geologic framework of a transect of the central Brooks Range: Regional relations and an alternative to the Endicott Mountains allochthon

This paper evaluates the geologic framework and tectonic development of the central Brooks Range based on a transect through the range and Arctic foothills. A geologic cross section constructed through the transect is confirmed by comparing the retrodeformed section with the regional distribution of lithofacies in the central Brooks Range. Stratigraphic relations in the retrodeformed section are further explained by comparing them to similar stratigraphic relations in the Ikpikpuk-Umiat basin under the Arctic coastal plain. The structural framework of the central Brooks Range and Arctic foothills consists of fold nappes, thrust faults, and detached folds that sole in decollements and late-stage high-angle faults. In the central Brooks Range, shortening is by north-directed thrust faulting and folding of mostly Paleozoic rocks, and transport of any individual thrust sheet relative to underlying rocks is less than 30 km. In the middle of the range, imbricate blocks of lower Paleozoic basement are exposed in the core of the Doonerak anticline, and thrust sheets of stratigraphically higher Paleozoic rocks that overlie basement are exposed in the limbs of the anticline. In the northeast part of the anticline, the Amawk thrust emplaces Silurian and Upper Devonian rocks on a succession of Lower Mississippian an stratigraphically higher rocks that have been detached from the underlying basement along the Blarney Creek thrust. The Slatepile fault system, a system of high-angle faults in the north limb of the Doonerak anticline, drops the core and part of the north limb of the anticline down, giving the impression that the succession of Lower Mississippian and stratigraphically higher rocks that lie on basement south of the system high-angle faults extends under the Upper Devonian rocks that extensively crop out north of the high-angle faults. In the Arctic foothills, the mostly Paleozoic rocks of the north-central Brooks Range extend under Lower Cretaceous rocks of the North Slope foreland basin, and blind thrusts that sole in the Paleozoic rocks ramp up into the Lower Cretaceous and stratigraph cally higher rocks. Also in the Arctic foothills, a thrust sheet that contains the Arctic foothills assemblage overlies rocks of the north-central Brooks Range and Lower Cretaceous rocks of the North Slope foreland basin. Thrust transport of the Arctic foothills assemblage more than 40 km from south of the Doonerak anticline took place during the Early Cretaceous, but thrusting that deformed rocks of the North Slope foreland basin took place during the early Tertiary, with the vertical uplift of the Doonerak anticline being a late-formed feature. Conclusions based on the retrodeformed cross section contrast significantly with previous work in which the Upper Devonian and stratigraphically higher rocks north of the Doonerak anticline are considered part of the Endicott Mountains allochthon, a regional allochthon that extends the breadth of the Brooks Range. In these models, Upper Devonian and younger rocks in the north-central Brooks Range have been thrust-transported 90 or 200 km from south of the Doonerak anticline, and emplacement of the allochthon could reflect as much as 885 km of tectonic shortening. The Lower Mississippian and stratigraphically higher rocks together with the underlying basement in the northeast part of the anticline are considered to be in a window in the Endicott Mountains allochthon and to extend northward beneath allochthonous Upper Devonian and stratigraphically higher rocks in the north-central Brooks Range. Lithofacies patterns in rocks in the central Brooks Range are consistent with the retrodeformed cross section and imply plausible Upper Devonian and Carboniferous depositional systems. Thick Upper Devonian and Lower Mississippian(?) clastic prisms were deposited in basins north of the Doonerak anticline. Mississippian carbonate rocks that overlie these clastic prisms were deposited in differentially subsiding shelf environments that included rocks in the Doonerak anticline. Restored across the Blarney Creek thrust, the Mississippian shelf carbonate rocks that presently lie north of the Doonerak anticline are those that were deposited on basement in the anticline. A carbonate ramp at the south edge of these shelf deposits extends east-southeast across the central Brooks Range and in th retrodeformed section lies south of the Doonerak anticline where Upper and Middle(?) Devonian shaly rocks thicken to the south. Unrestored, the ramp would extend across the Doonerak anticline. Restored Late Devonian and Carboniferous lithofacies patterns in the central Brooks Range also are plausible from a regional perspective and have implications for exploration of basins under the Arctic coastal plain. The Late Devonian to Early Mississippian(?) basins in the north-central Brooks Range are part of a system of Early(?) Devonian to Early Mississippian(?) clastic basins that extend the length of the Brooks Range and include basins under the Arctic coastal plain. These basins are a template for depositional patterns in overlying rocks. Marine shelves between these basins where Mississippian strata unconformably lie on basement, such as in the northeastern Brooks Range and the Doonerak anticline, have depositional histories that are in contrast to areas that overlie the basi s. The resulting stratigraphic framework, together with the structural framework in the basement rocks that controlled the basins, has had a profound effect on the structural style of the fold belt, the salient effect being folds and thrust faults that are not orthogonal to the direction of structural transport. Stratigraphic relations exposed in the fold belt, especially the distribution of potential source rocks, likely model little-explored basins that underlie the North Slope foreland basin.

Alaska↗