SEARCH · USGS Science

Results for “Letter Report”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15Linked to original sources

USGS1918

Topographic instructions of the United States Geological Survey

This book is intended to replace the instructions relating to the topographic work of the United States Geological Survey, issued as a part of the general Survey, instructions of 1903, which are now in many respects obsolete, although revised portions of them have, from time to time, been issued as circular letters or printed leaflets. The several portions of this book were prepared by the members of the topographic branch best qualified for the task and were assembled and revised by the division chiefs and finally reviewed by the chief geographer. It is desired to make the instructions complete so far as the technical work of map making is concerned and to reduce to a minimum the necessity for personal instructions.

Monograph↗

USGS1999

Avian botulism

Avian botulism is a paralytic, often fatal, disease of birds that results when they ingest toxin produced by the bacterium, Clostridium botulinum . Seven distinct types of toxin designated by the letters A to G have been identified (Table 38.1). Waterfowl die-offs due to botulism are usually caused by type C toxin; sporadic die-offs among fish-eating birds, such as common loons and gulls, have been caused by type E toxin. Type A botulinum toxin has also caused disease in birds, most frequently in domestic chickens. Types B, D, F, and G are not known to cause avian botulism in North America.

Information and Technology Report↗

USGS2008

Seawater osmium isotope evidence for a middle Miocene flood basalt event in ferromanganese crust records

Three ferromanganese crusts from the northeast, northwest and central Atlantic were re-dated using osmium (Os) isotope stratigraphy and yield ages from middle Miocene to the present. The three Os isotope records do not show evidence for growth hiatuses. The reconstructed Os isotope-based growth rates for the sections older than 10??Ma are higher than those determined previously by the combined beryllium isotope (10Be/9Be) and cobalt (Co) constant-flux methods, which results in a decrease in the maximum age of each crust. This re-dating does not lead to significant changes to the interpretation of previously determined radiogenic isotope neodymium, lead (Nd, Pb) time series because the variability of these isotopes was very small in the records of the three crusts prior to 10??Ma. The Os isotope record of the central Atlantic crust shows a pronounced minimum during the middle Miocene between 15 and 12??Ma, similar to a minimum previously observed in two ferromanganese crusts from the central Pacific. For the other two Atlantic crusts, the Os isotope records and their calibration to the global seawater curve for the middle Miocene are either more uncertain or too short and thus do not allow for a reliable identification of an isotopic minimum. Similar to pronounced minima reported previously for the Cretaceous/Tertiary and Eocene/Oligocene boundaries, possible interpretations for the newly identified middle Miocene Os isotope minimum include changes in weathering intensity and/or a meteorite impact coinciding with the formation of the No??rdlinger Ries Crater. It is suggested that the eruption and weathering of the Columbia River flood basalts provided a significant amount of the unradiogenic Os required to produce the middle Miocene minimum. ?? 2008 Elsevier B.V.

Earth and Planetary Science Letters↗

USGS2016

The potential uses of operational earthquake forecasting

This article reports on a workshop held to explore the potential uses of operational earthquake forecasting (OEF). We discuss the current status of OEF in the United States and elsewhere, the types of products that could be generated, the various potential users and uses of OEF, and the need for carefully crafted communication protocols. Although operationalization challenges remain, there was clear consensus among the stakeholders at the workshop that OEF could be useful.

Seismological Research Letters↗

USGS1996

Earthquakes and the southeastern boundary of the intact Iapetan margin in eastern North America

Earthquakes at three localities in eastern North America have been attributed on geological and seismological grounds to compressional reactivation of some of the late Proterozoic or early Paleozoic normal faults in the northeast-trending Iapetan passive margin. Assessment of seismic hazard can be aided by identifying the boundaries of the area of Iapetan faulting. A previous paper located the northwestern boundary. This report interprets deep seismic-reflection profiles as showing that the margin comprises a seismically active northwestern part, where Precambrian crust contains some Iapetan faults but remains mostly as it was formed, and a southeastern part, where later deformations likely destroyed or modified the Precambrian crust and Iapetan faults. Accordingly, the boundary between the northwestern and southeastern parts of the margin, which coincides approximately with the Appalachian gravity gradient, can be taken as the southeastern limit of potentially seismogenic Iapetan faults.

eastern North America↗

USGS1989

Summary geochemical maps of the Harrison 1° x 2° quadrangle, Arkansas and Missouri

This map is the first in a folio of maps of the Harrison 1° x 2° quadrangle, Arkansas and Missouri, prepared under the Conterminous United States Mineral Assessment Program. Additional maps showing various other geologic aspects of the Harrison quadrangle will be published as U.S. Geological Survey Miscellaneous Field Studies Maps bearing the same serial number with different letter suffixes (MF-1994-B, -C, and so on). Geochemical studies of the Harrison lo x 2° quadrangle, Arkansas and Missouri, are part of a joint multidisciplinary study by the U.S. Geological Survey; the Division of Geology and Land Survey, Missouri Department of Natural Resources; and the Arkansas Geological Commission. The objective of the joint study is to assess the mineral-resource potential of the area by integrated geologic, geochemical, and geophysical investigations.

Arkansas, Missouri↗

USGS2023

Perfluorooctanesulfonate adversely affects a mayfly (Neocloeon triangulifer) at environmentally realistic concentrations

Of the emerging contaminant types thought to threaten freshwater biota, per- and polyfluoroalkyl substances appear to be particularly widespread, and limited studies conducted with these compounds thus far indicate insects may be particularly sensitive to them. This study investigated the short- and long-term effects of two commonly detected compounds on the laboratory-reared mayfly Neocloeon triangulifer in water only exposures. In acute tests, the mayfly was approximately 85-fold more sensitive to perfluorooctanesulfonate (PFOS) and 7-fold more sensitive to perfluorooctanoic acid (PFOA) than the next most sensitive species reported in the literature. In 14 day and full-life chronic PFOS toxicity tests, the lowest 10% effect concentration was 0.272 μg of PFOS/L, which is lower than any previous reports to the best of our knowledge, but consistent in demonstrating the sensitivity of insects to this compound. Conversely, N. triangulifer was not particularly chronically sensitive to PFOA. This study demonstrates the risks of environmentally relevant concentrations of PFOS to a freshwater insect and suggests that investigation of the toxicity of more compounds with different carbon-chain lengths and functional groups to freshwater insects is needed.

Environmental Science & Technology Letters↗

USGS2020

Direct evidence for fluid pressure, dilatancy, and compaction affecting slip in isolated faults

Earthquake instability occurs as a result of strength loss during sliding on a fault. It has been known for over 50 years that fault compaction or dilatancy may cause significant weakening or strengthening by dramatically changing the fluid pressure trapped in faults. Despite this fundamental importance, we have no real understanding of the exact conditions that lead to compaction or dilation during nucleation or rupture. To date, no direct measurements of pore pressure changes during slip in hydraulically isolated faults have been reported. We show direct examples of fluid pressure variations during nucleation and rupture using a miniature pressure transducer embedded in an experimental fault. We demonstrate that fluids are not only significant in controlling fault behavior, but can provide the dominant mechanism controlling fault stability. The effect of fluid pressure changes can exceed frictional variations predicted by rate- and state-dependent friction laws, exerting fundamental controls on earthquake rupture initiation.

Geophysical Research Letters↗

USGS2009

Archive of digital boomer and CHIRP seismic reflection data collected during USGS field activity 08LCA03 in Lake Panasoffkee, Florida, May 2008

In May of 2008, the U.S. Geological Survey (USGS) conducted geophysical surveys in Lake Panasoffkee, located in central Florida, as part of the USGS Lakes and Coastal Aquifers (LCA) study. This report serves as an archive of unprocessed digital boomer and Compressed High Intensity Radar Pulse (CHIRP)* seismic reflection data, trackline maps, navigation files, Field Activity Collection System (FACS) logs, Geographic Information System (GIS) files, and formal Federal Geographic Data Committee (FGDC) metadata. Filtered and gained (a relative increase in signal amplitude) digital images of the seismic profiles and geospatially corrected interactive profiles are also provided. Refer to the Acronyms page for expansions of acronyms and abbreviations used in this report. *Due to poor data acquisition conditions associated with the lake bottom sediments, only two CHIRP tracklines were collected during this field activity. The archived trace data are in standard Society of Exploration Geophysicists (SEG) SEG-Y format (Barry and others, 1975) and may be downloaded and processed with commercial or public domain software such as Seismic Unix (SU). Example SU processing scripts and USGS software for viewing the SEG-Y files (Zihlman, 1992) are provided. The USGS Florida Integrated Science Center (FISC) - St. Petersburg assigns a unique identifier to each cruise or field activity. For example, 08LCA03 tells us the data were collected in 2008 for the Lakes and Coastal Aquifers (LCA) study and the data were collected during the third field activity for that study in that calendar year. Refer to http://walrus.wr.usgs.gov/infobank/programs/html/definition/activity.html for a detailed description of the method used to assign the field activity ID. The naming convention used for each seismic line is as follows: yye##a, where 'yy' are the last two digits of the year in which the data were collected, 'e' is a 1-letter abbreviation for the equipment type (for example, b for boomer and c for CHIRP), '##' is a 2-digit number representing a specific track, and 'a' is a letter representing the section of a line if recording was prematurely terminated or rerun for quality or acquisition problems. The boomer plate is an acoustic energy source that consists of capacitors charged to a high voltage and discharged through a transducer in the water. The transducer is towed on a sled floating on the water surface and, when discharged, emits a short acoustic pulse, or shot, which propagates through the water, sediment column, or rock beneath. The acoustic energy is reflected at density boundaries (such as the seafloor, sediment, or rock layers beneath the seafloor), detected by the receiver, and recorded by a PC-based seismic acquisition system. This process is repeated at timed intervals (for example, 0.5 s) and recorded for specific intervals of time (for example, 100 ms). In this way, a two-dimensional (2-D) vertical profile of the shallow geologic structure beneath the ship track is produced. Figure 1 displays the boomer acquisition geometry. The EdgeTech SB-424 CHIRP system used for this survey has a vertical resolution of 4 - 8 cm, a penetration depth that is usually less than 2 m beneath the seafloor, and uses a signal of continuously varying frequency. The towfish is a sound source and receiver, which is typically towed 2 - 5 m above the seafloor. The acoustic energy is reflected at density boundaries (such as the seafloor or sediment layers beneath the seafloor), detected by a receiver, and recorded by a PC-based seismic acquisition system. This process is repeated at timed intervals (for example, 0.125 s) and recorded for specific intervals of time (for example, 50 ms); the resulting profile is a two-dimensional vertical image of the shallow geologic structure beneath the ship track. Figure 2 displays the acquisition geometry for the CHIRP system. Refer to table 1 for a summary of acquisition parameters and table 2 for trackline statistics.

Florida↗

USGS2019

Calibration analysis and noise estimates of WWSSN Station ALQ (Albuquerque, New Mexico)

World‐Wide Standardized Seismograph Network (WWSSN) records contain daily calibration pulses that can be used to retrieve the magnification as well as the response of the instrument for a given day record. We analyze a select number of long‐period vertical (LPZ) records from WWSSN station ALQ (Albuquerque, New Mexico). Although we find that the response of this instrument varies widely throughout time, we show that in most cases, we are able to estimate a pole‐zero response that has a root mean square error of < 10 % "> <10% ⁠ . The variability of responses in historical networks has been reported elsewhere because a large number of adjustments of the galvanometer and seismometer were necessary. Using our derived responses, we estimate noise levels for a number of 1 hr digitized traces. We find that noise levels for the LPZ ALQ records are lower than previously reported, suggesting that these records can resolve smaller amplitude signals than previously suggested. We also find that although care must be taken in the digitization and calibration analysis, we are not limited by noise introduced in the digitization process. Finally, we see that to retrieve the full secondary microseism amplitude, we must use both the LPZ and short‐period components because the LPZ component is limited by system noise at periods less than ∼ 5    s "> ∼5 s ⁠ .

New Mexico↗

USGS1999

Turbidite pathways in Cascadia Basin and Tufts abyssal plain, Part A, Astoria Channel, Blanco Valley, and Gorda Basin

This open-file report was prepared in support of the USGS Earthquake Hazards of Cascadia Project. The primary objective of this phase of the project is to determine recurrence intervals of turbidites in Cascadia basin-floor channel systems and evaluate implications of this event record for the paleoseismic history of the Cascadia subduction zone. The purpose of this study is to determine whether the canyon/channel systems themselves are blocked or deformed in such a way that the downstream turbidite stratigraphy might be biased. To accomplish this investigation approximately 7500 kilometers of pre-existing 3.5 KHz seismic data were evaluated to determine the direction and extent of the Astoria Channel/pathway system, which originates at the base of the Astoria Fan. Additionally, distribution and thickness of turbidite sediment sequences were determined along each identified pathway. Bathymetery and distance were used to determine gradients along the main pathway axis and for each of the secondary pathways that feed into it. Channel pathways were identified on the basis of channel phyisiography, where visible at the seafloor, subbottom channel configuration, and acoustic packets of sediments that might represent turbidite deposits. A principal result of this study is that the Astoria Channel/pathway extends continuously from the base of the Astoria Fan southward along the base of the continental slope through the Blanco Valley, then heads southwestward through the Gorda Basin and into the region of the Escanaba Trough. Additionally it was determined that the Astoria Channel is filled and basically buried for it's full length south of 44 degrees latitude. The 44 North Slump, as defined by Goldfinger (1999, see Map 3 ref.), may have been instrumental in blocking the pathway and thus contributed to the filling of the channel/pathway. Sheets 1 and 2 show the Astoria and secondary turbidite pathways highlighted in blue. Ship survey tracklines are shown for the area studied; they are time and date coded, and color keyed to each ship ID data base listed at the bottom of each sheet. The first letter in the cruise ID is an abbreviation letter for the ship name, the following numbers represent the consecutive cruise number of that year, followed by the year number. The letters at the end of the ID represent the survey area, ie. NC- northern California, NP- north Pacific. Locations of selected sample seismic sections illustrated on sheets 3-5 also are shown. Scales for each of the sheets are the same as for sheets 3-5, which allows for overlaying of track data onto the interpretations shown on Maps A-C. Sheets 3 (MAP A), 4 (MAP B), and 5 (MAP C) show channel pathway location, bathymetric depth based on the USGS COW data base (Ca/Or/Wa), pathway morphology, and thickness of turbidite sediment fill at various locations. The interpreted turbidite sediments are color highlighted on the selected seismic sections to differentiate them from the typical deep sea sediments below and to the side of the turbidite pathways. Thickness of sediment fill, in meters, is shown along major pathways in white circular highlights. The data and interpretations rest on a background of USGS GLORIA side scan sonar imagery (1984) to illustrate the relationship of pathway position to sub sea features. Channel distance points are plotted along channel centerlines at 20,000 m intervals. These points begin at the start of each interpreted channel pathway. A bathymetric depth was assigned to each distance point. These data points were then used to construct channel gradient curves for the Astoria, Eel, Bear Valley, and Mendocino channel pathways. These gradients are plotted on sheet 6 of this report and illustrate the similarities and differences between each of the pathways. Sheet 7 shows various views of the Mendocino/Mattole Canyon heads as an example of useful derivative information of the Seabeam bathymetric data. These views illustrate that the Mendocino pathway probably was directed from it's canyon mouth, to the northwest at an earlier time, but was diverted to the west along the base of the Mendocino Ridge by a major fault event in the recent past. Offset of the southwest channel wall is readily evident in views B and D. This apparent disruption complicates the turbidite history of the Mendocino pathway.

California;Oregon↗

USGS2017

Continuously amplified warming in the Alaskan Arctic: Implications for estimating global warming hiatus

Historically, in situ measurements have been notoriously sparse over the Arctic. As a consequence, the existing gridded data of surface air temperature (SAT) may have large biases in estimating the warming trend in this region. Using data from an expanded monitoring network with 31 stations in the Alaskan Arctic, we demonstrate that the SAT has increased by 2.19°C in this region, or at a rate of 0.23°C/decade during 1921–2015. Meanwhile, we found that the SAT warmed at 0.71°C/decade over 1998–2015, which is 2 to 3 times faster than the rate established from the gridded data sets. Focusing on the “hiatus” period 1998–2012 as identified by the Intergovernmental Panel on Climate Change (IPCC) report, the SAT has increased at 0.45°C/decade, which captures more than 90% of the regional trend for 1951–2012. We suggest that sparse in situ measurements are responsible for underestimation of the SAT change in the gridded data sets. It is likely that enhanced climate warming may also have happened in the other regions of the Arctic since the late 1990s but left undetected because of incomplete observational coverage.

Alaska↗

USGS2009

Extension of Gutenberg‐Richter distribution to MW −1.3, no lower limit in sight

With twelve years of seismic data from TauTona Gold Mine, South Africa, we show that mining‐induced earthquakes follow the Gutenberg‐Richter relation with no scale break down to the completeness level of the catalog, at moment magnitude M W −1.3. Events recorded during relatively quiet hours in 2006 indicate that catalog detection limitations, not earthquake source physics, controlled the previously reported minimum magnitude in this mine. Within the Natural Earthquake Laboratory in South African Mines (NELSAM) experiment's dense seismic array, earthquakes that exhibit shear failure at magnitudes as small as M W −3.9 are observed, but we find no evidence that M W −3.9 represents the minimum magnitude. In contrast to previous work, our results imply small nucleation zones and that earthquake processes in the mine can readily be scaled to those in either laboratory experiments or natural faults.

TauTona Mine↗

USGS1989

Methods for collection and analysis of aquatic biological and microbiological samples

The series of chapters on techniques describes methods used by the U.S. Geological Survey for planning and conducting water-resources investigations. The material is arranged under major subject headings called books and is further subdivided into sections and chapters. Book 5 is on laboratory analysis. Section A is on water. The unit of publication, the chapter, is limited to a narrow field of subject matter. "Methods for Collection and Analysis of Aquatic Biological and Microbiological Samples" is the fourth chapter to be published under Section A of Book 5. The chapter number includes the letter of the section. This chapter was prepared by several aquatic biologists and microbiologists of the U.S. Geological Survey to provide accurate and precise methods for the collection and analysis of aquatic biological and microbiological samples. Use of brand, firm, and trade names in this chapter is for identification purposes only and does not constitute endorsement by the U.S. Geological Survey. This chapter supersedes "Methods for Collection and Analysis of Aquatic Biological and Microbiological Samples" edited by P.E. Greeson, T.A. Ehlke, G.A. Irwin, B.W. Lium, and K.V. Slack (U.S. Geological Survey Techniques of Water-Resources Investigations, Book 5, Chapter A4, 1977) and also supersedes "A Supplement to-Methods for Collection and Analysis of Aquatic Biological and Microbiological Samples" by P.E. Greeson (U.S. Geological Survey Techniques of Water-Resources Investigations, Book 5, Chapter A4), Open-File Report 79-1279, 1979.

Techniques of Water-Resources Investigations↗

USGS1974

Hydrologic Unit Map -- 1974, State of Michigan

This map and accompanying table show Hydrologic Units that are basically hydrographic in nature. The Cataloging Units shown will supplant the Cataloging Units previously used by the U.S. Geological Survey in its Catalog of Information on Water Data (1966-72). The previous U.S. Geological Survey Catalog-Indexing System was by map number and letter, such as 49 M. The boundaries shown have been adapted from "The Catalog of Information on Water Data" (1972), "Water Resources Regions and Subregions for the National Assessment of Water and Related Land Resources" by the U.S. Water Resources Council (1970), " River Basins of the United States" by the U.S. Soil Conservation Service (1963, 1970), "River Basin Maps Showing Hydrologic Stations" by the Inter-Agency Committee on Water Resources, Subcommittee on Hydrology (1961), and States planning maps.

Michigan↗

USGS1976

Hydrologic Unit Map - 1974, state of Montana

This map and accompanying table show Hydrologic Units that are basically hydrographic in nature. The Cataloging Units shown will supplant the Cataloging Units previously used by the U.S. Geological Survey in its Catalog of Informaiton on Water Data (1966-72). The previous U.S. Geological Survey Catalog-Indexing System was by map number and letter, such as 49M. The boundaries as shown have been adapted from "The Catalog of Information on Water Data" (1972), "Water Resources Regions and Subregions for the National Assessment of Water and Related Land Resources" by the U.S. Water Reseources Council (1970), "River Basins of the United States" by the U.S. Soil Conservation Service ((1963, 1970), "River Basin Maps Showing Hydrologic Stations" by the Inter-Agency Committee on Water Resources, Subcommittee on Hydrology (1961), and State planning maps.

Montana↗

USGS1974

Hydrologic unit map:1974, State of Utah

This map and accompanying table show Hydrologic Units that are basically hydrographic in nature. The Cataloging Units shown will supplant the Cataloging Units previously used by the U.S. Geological Survey in its Catalog of Information on Water Data (1966-72). The previous U.S. Geological Survey Catalog-Indexing System was by map number and letter, such as 49M. the boundaries as shown have been adapted from “the Catalog of Information on Water Data” (1972), “Water Resources Regions and Subregions for the National Assessment of Water and Related Land Resources” by the U.S. Water Resources Council (1970), “River Basins of the United States” by the U.S. Soil Conservation Service (1963, 1970), “River Basin Maps Showing Hydrologic Stations” by the Inter-Agency Committee on Water Resourres, Subcommittee on hydrology (1961), and State planning maps.

Utah↗

USGS2018

Injection-induced moment release can also be aseismic

The cumulative seismic moment is a robust measure of the earthquake response to fluid injection for injection volumes ranging from 3100 to about 12 million m3. Over this range, the moment release is limited to twice the product of the shear modulus and the volume of injected fluid. This relation also applies at the much smaller injection volumes of the field experiment in France reported by Guglielmi, et al. (2015) and laboratory experiments to simulate hydraulic fracturing described by Goodfellow, et al. (2015). In both of these studies, the relevant moment release for comparison with the fluid injection was aseismic and consistent with the scaling that applies to the much larger volumes associated with injection-induced earthquakes with magnitudes extending up to 5.8. Neither the micro-earthquakes, at the site in France, nor the acoustic emission in the laboratory samples contributed significantly to the deformation due to fluid injection.

Geophysical Research Letters↗