SEARCH · USGS Science

Results for “Journal of Geophysical Research Earth Surface”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15Linked to original sources

USGS2016

Fault segmentation: New concepts from the Wasatch Fault Zone, Utah, USA

The question of whether structural segment boundaries along multisegment normal faults such as the Wasatch fault zone (WFZ) act as persistent barriers to rupture is critical to seismic hazard analyses. We synthesized late Holocene paleoseismic data from 20 trench sites along the central WFZ to evaluate earthquake rupture length and fault segmentation. For the youngest (<3 ka) and best-constrained earthquakes, differences in earthquake timing across prominent primary segment boundaries, especially for the most recent earthquakes on the north-central WFZ, are consistent with segment-controlled ruptures. However, broadly constrained earthquake times, dissimilar event times along the segments, the presence of smaller-scale (subsegment) boundaries, and areas of complex faulting permit partial-segment and multisegment (e.g., spillover) ruptures that are shorter (~20–40 km) or longer (~60–100 km) than the primary segment lengths (35–59 km). We report a segmented WFZ model that includes 24 earthquakes since ~7 ka and yields mean estimates of recurrence (1.1–1.3 kyr) and vertical slip rate (1.3–2.0 mm/yr) for the segments. However, additional rupture scenarios that include segment boundary spatial uncertainties, floating earthquakes, and multisegment ruptures are necessary to fully address epistemic uncertainties in rupture length. We compare the central WFZ to paleoseismic and historical surface ruptures in the Basin and Range Province and central Italian Apennines and conclude that displacement profiles have limited value for assessing the persistence of segment boundaries but can aid in interpreting prehistoric spillover ruptures. Our comparison also suggests that the probabilities of shorter and longer ruptures on the WFZ need to be investigated.

Utah↗

USGS2003

Late Pleistocene to Holocene slip rates for the Gurvan Bulag thrust fault (Gobi-Altay, Mongolia) estimated with 10Be dates

We surveyed morphotectonic markers along the central part of the Gurvan Bulag thrust, a fault that ruptured with the Bogd fault during the Gobi-Altay earthquake (1957, M 8.3), to document climatic and tectonic processes along the fault for the late Pleistocene- Holocene period. The markers were dated using 10Be produced in situ. Two major periods of alluviation ended at 131 ?? 20 and 16 ?? 4.8 ka. These appear to be contemporaneous with global climatic changes at the terminations of marine isotope stages (MIS) 6 and 2. The vertical slip rates, determined from offset measurements and surfaces ages, are 0.14 ?? 0.03 mm/yr over the late Pleistocene-Holocene and between 0.44 ?? 0.11 and 1.05 ?? 0.25 mm/yr since the end of the late Pleistocene. The higher of these slip rates for the last ???16 kyr is consistent with paleoseismic investigations along the fault [Prentice et al., 2002], and suggests that, at the end of late Pleistocene, the fault evolved from quiescence to having recurrence intervals of 4.0 ?? 1.2 kyr for surface ruptures with ???4 m vertical offset (similar to that of 1957). The inferred recurrence interval is comparable to that of the Bogd fault (3.7 ?? 1.3 kyr) suggesting that the two faults may have ruptured together also earlier during the last ???16 kyr.

Journal of Geophysical Research B: Solid Earth↗

USGS2012

A magmatic model of Medicine Lake Volcano, California

Medicine Lake volcano is a Pleistocene and Holocene shield volcano of the southern Cascade Range. It is located behind the main Cascade arc in an extensional tectonic setting where high-alumina basalt is the most commonly erupted lava. This basalt is parental to the higher-silica calc-alkaline and tholeiitic lavas that make up the bulk of the shield. The presence of late Holocene, chemically identical rhyolites on opposite sides of the volcano led to hypotheses of a large shallow silicic magma chamber and of a small, deep chamber that fed rhyolites to the surface via cone sheets. Subsequent geophysical work has been unable to identify a large silicic magma body, and instead a small one has apparently been recognized. Some geologic data support the geophysical results. Tectonic control of vent alignments and the dominance of mafic eruptions both in number of events and volume throughout the history of the volcano indicate that no large silicic magma reservoir exists. Instead, a model is proposed that includes numerous dikes, sills, and small magma bodies, most of which are too small to be recognized by present geophysical methods.

Journal of Geophysical Research Solid Earth↗

USGS2012

Tidal triggering of low frequency earthquakes near Parkfield, California: Implications for fault mechanics within the brittle-ductile transition

Studies of nonvolcanic tremor (NVT) have established the significant impact of small stress perturbations on NVT generation. Here we analyze the influence of the solid earth and ocean tides on a catalog of ∼550,000 low frequency earthquakes (LFEs) distributed along a 150 km section of the San Andreas Fault centered at Parkfield. LFE families are identified in the NVT data on the basis of waveform similarity and are thought to represent small, effectively co-located earthquakes occurring on brittle asperities on an otherwise aseismic fault at depths of 16 to 30 km. We calculate the sensitivity of each of these 88 LFE families to the tidally induced right-lateral shear stress (RLSS), fault-normal stress (FNS), and their time derivatives and use the hypocentral locations of each family to map the spatial variability of this sensitivity. LFE occurrence is most strongly modulated by fluctuations in shear stress, with the majority of families demonstrating a correlation with RLSS at the 99% confidence level or above. Producing the observed LFE rate modulation in response to shear stress perturbations requires low effective stress in the LFE source region. There are substantial lateral and vertical variations in tidal shear stress sensitivity, which we interpret to reflect spatial variation in source region properties, such as friction and pore fluid pressure. Additionally, we find that highly episodic, shallow LFE families are generally less correlated with tidal stresses than their deeper, continuously active counterparts. The majority of families have weaker or insignificant correlation with positive (tensile) FNS. Two groups of families demonstrate a stronger correlation with fault-normal tension to the north and with compression to the south of Parkfield. The families that correlate with fault-normal clamping coincide with a releasing right bend in the surface fault trace and the LFE locations, suggesting that the San Andreas remains localized and contiguous down to near the base of the crust. The deep families that have high sensitivity to both shear and tensile normal stress perturbations may be indicative of an increase in effective fault contact area with depth. Synthesizing our observations with those of other LFE-hosting localities will help to develop a comprehensive understanding of transient fault slip below the “seismogenic zone” by providing constraints on parameters in physical models of slow slip and LFEs.

California↗

USGS2003

Evidence for a Battle Mountain-Eureka crustal fault zone, north-central Nevada, and its relation to Neoproterozoic-Early Paleozoic continental breakup

Combined evidence from gravity, radiogenic isotope, and magnetotelluric (MT) data indicates a crustal fault zone that coincides with the northwest-trending Battle Mountain-Eureka (BME) mineral trend in north-central Nevada, USA. The BME crustal fault zone likely originated during Neoproterozoic-Early Paleozoic rifting of the continent and had a large influence on subsequent tectonic events, such as emplacement of allochthons and episodic deformation, magmatism, and mineralization throughout the Phanerozoic. MT models show the fault zone is about 10 km wide, 130-km long, and extends from 1 to 5 km below the surface to deep crustal levels. Isotope data and gravity models imply the fault zone separates crust of fundamentally different character. Geophysical evidence for such a long-lived structure, likely inherited from continental breakup, defies conventional wisdom that structures this old have been destroyed by Cenozoic extensional processes. Moreover, the coincidence with the alignment of mineral deposits supports the assertion by many economic geologists that these alignments are indicators of buried regional structures.

Journal of Geophysical Research B: Solid Earth↗

USGS2016

Tomographic image of a seismically active volcano: Mammoth Mountain, California

High-resolution tomographic P wave, S wave, and V P / V S velocity structure models are derived for Mammoth Mountain, California, using phase data from the Northern California Seismic Network and a temporary deployment of broadband seismometers. An anomalous volume (5.1 × 10 9 to 5.9 × 10 10 m 3 ) of low P and low S wave velocities is imaged beneath Mammoth Mountain, extending from near the surface to a depth of &sim;2 km below sea level. We infer that the reduction in seismic wave velocities is due to the presence of CO 2 distributed in oblate spheroid pores with mean aspect ratio α = 1.6 × 10 −3 to 7.9 × 10 −3 (crack-like pores) and mean gas volume fraction ϕ = 8.1 × 10 −4 to 3.4 × 10 −3 . The pore density parameter κ = 3 ϕ /(4π α ) = na 3 =0.11, where n is the number of pores per cubic meter and a is the mean pore equatorial radius. The total mass of CO 2 is estimated to be 4.6 × 10 9 to 1.9 × 10 11 kg. The local geological structure indicates that the CO 2 contained in the pores is delivered to the surface through fractures controlled by faults and remnant foliation of the bedrock beneath Mammoth Mountain. The total volume of CO 2 contained in the reservoir suggests that given an emission rate of 500 tons day −1 , the reservoir could supply the emission of CO 2 for &sim;25–1040 years before depletion. Continued supply of CO 2 from an underlying magmatic system would significantly prolong the existence of the reservoir.

California↗

USGS2023

Identification of seismo-volcanic regimes at Whakaari/White Island (New Zealand) via systematic tuning of an unsupervised classifier

We present an algorithm based on Self-Organizing Maps (SOM) and k-means clustering to recognize patterns in a continuous 12.5-year tremor time series recorded at Whakaari/White Island volcano, New Zealand (hereafter referred to as Whakaari). The approach is extendable to a variety of volcanic settings through systematic tuning of the classifier. Hyperparameters are evaluated by statistical means, yielding a combination of “ideal” SOM parameters for the given data set. Extending from this, we applied a Kernel Density Estimation approach to automatically detect changes within the observed seismicity. We categorize the Whakaari seismic time series into regimes representing distinct volcano-seismic states during recent unrest episodes at Whakaari (2012/2013, 2016, and 2019). There is a clear separation in classification results between background regimes and those representing elevated levels of unrest. Onset of unrest is detected by the classifier 6 weeks before the August 2012 eruption, and ca. 3.5 months before the December 2019 eruption, respectively. Regime changes are corroborated by changes in commonly monitored tremor proxies as well as with reported volcanic activity. The regimes are hypothesized to represent diverse mechanisms including: system pressurization and depressurization, degassing, and elevated surface activity. Labeling these regimes improves visualization of the 2012/2013 and 2019 unrest and eruptive episodes. The pre-eruptive 2016 unrest showed a contrasting shape and nature of seismic regimes, suggesting differing onset and driving processes. The 2016 episode is proposed to result from rapid destabilization of the shallow hydrothermal system, while rising magmatic gases from new injections of magma better explain the 2012/2013 and 2019 episodes.

Whakaari, White Island↗

USGS2009

On near-source earthquake triggering

[1] When one earthquake triggers others nearby, what connects them? Two processes are observed: static stress change from fault offset and dynamic stress changes from passing seismic waves. In the near-source region ( r ≤ 50 km for M ∼ 5 sources) both processes may be operating, and since both mechanisms are expected to raise earthquake rates, it is difficult to isolate them. We thus compare explosions with earthquakes because only earthquakes cause significant static stress changes. We find that large explosions at the Nevada Test Site do not trigger earthquakes at rates comparable to similar magnitude earthquakes. Surface waves are associated with regional and long-range dynamic triggering, but we note that surface waves with low enough frequency to penetrate to depths where most aftershocks of the 1992 M = 5.7 Little Skull Mountain main shock occurred (∼12 km) would not have developed significant amplitude within a 50-km radius. We therefore focus on the best candidate phases to cause local dynamic triggering, direct waves that pass through observed near-source aftershock clusters. We examine these phases, which arrived at the nearest (200–270 km) broadband station before the surface wave train and could thus be isolated for study. Direct comparison of spectral amplitudes of presurface wave arrivals shows that M ∼ 5 explosions and earthquakes deliver the same peak dynamic stresses into the near-source crust. We conclude that a static stress change model can readily explain observed aftershock patterns, whereas it is difficult to attribute near-source triggering to a dynamic process because of the dearth of aftershocks near large explosions.

Journal of Geophysical Research B: Solid Earth↗

USGS2011

Frictional strengths of talc-serpentine and talc-quartz mixtures

Talc is a constituent of faults in a variety of settings, and it may be an effective weakening agent depending on its abundance and distribution within a fault. We conducted frictional strength experiments under hydrothermal conditions to determine the effect of talc on the strengths of synthetic gouges of lizardite and antigorite serpentinites and of quartz. Small amounts of talc weaken serpentinite gouges substantially more than predicted by simple weight averaging. In comparison, mixtures of quartz and talc show a linear trend of strength reduction at talc concentrations 15 wt % and enhanced weakening at higher concentrations. All of the strength data are fit by a modified version of the Reuss mixing law that allows for the dominance of one mineral over the other. The difference in the behavior of serpentinite-talc and quartz-talc mixtures at low talc concentrations is a reflection of their different textures. Lizardite, antigorite, and talc all have platy habits, and displacement within gouges composed of these minerals is localized to narrow shears along which the platy grains have rotated into alignment with the shear surfaces. The shears in the mixed phyllosilicate gouges maximize the proportion of the weaker mineral within them. When mixed with a strong, rounded mineral such as quartz, some minimum concentration of talc is needed to form connected pathways that enhance strength reductions. The typical development of talc by the reaction of Si-rich fluids with serpentinite or dolomite would tend to localize its occurrence in a natural fault and result in enhanced weakening.

Journal of Geophysical Research B: Solid Earth↗

USGS2012

Global map of eolian features on Mars

Ten basic categories of eolian features on Mars were identified from a survey of Mariner 9 and Viking orbiter images. The ten features mapped are (1) light streaks (including frost streaks), (2) dark streaks, (3) sand sheets or splotches, (4) barchari dunes, (5) transverse dunes, (6) crescentic dunes, (7) anomalous dunes, (8) yardangs, (9) wind grooves, and (10) deflation pits. The features were mapped in groups, not as individual landforms, and recorded according to their geographic positions and orientations on maps of 1:12.5 million or 1:25 million scale. In the north polar region, light and dark streaks indicate winds from the west and northwest. Frost streaks show northeast and northwest winds. Barchan dunes show southwest and west winds. Transverse dunes show east and west winds. Local erosional features show winds from the northwest or southeast and northeast or southwest. In the middle and low northern latitudes, streaks show northeast winds; yardangs and deflation pits show mostly easterly and northeasterly winds. In the low southern latitudes, light streaks and dunes record northwest and northeast winds; dark streaks record southeast winds. In high southern latitudes, most streaks and dunes record southeast and east winds. In the south polar region, light and frost streaks record southwest and northwest winds, whereas dark streaks and transverse dunes show southeast winds. The patterns recorded for ephemeral features conform to global conditions of strong southern spring and summer (northern fall and winter) wind circulation. Erosional features in bedrock indicate long-term and perhaps ancient wind trends, whereas depositional features may record relatively more recent winds. Wind directions indicated by yardangs, pits, and other erosional features seldom correspond to those shown by streaks. These erosional features indicating winds of different directions than those that formed the streaks may have been carved when the effective regional winds on Mars were different due to relative hemisphere insolation differences, which are related to obliquity variations. Alternatively, many yardangs and pits may be largely controlled by structure and carved along surface structural patterns or features that channeled both ancient and present-day winds. Deflation pits in the mantled terrain may contain the best record of ancient wind trends. These pits seem to have stratigraphically related orientations. Different stratigraphic units composing the mantle contain wind erosion pits that possibly record large-scale wind direction changes because of long-term changes in the obliquity of the Mars.

Journal of Geophysical Research Solid Earth↗

USGS1997

Three-dimensional upper crustal velocity structure beneath San Francisco Peninsula, California

This paper presents new seismic data from, and crustal models of the San Francisco Peninsula. In much of central California the San Andreas fault juxtaposes the Cretaceous granitic Salinian terrane on its west and the Late Mesozoic/Early Tertiary Franciscan Complex on its east. On San Francisco Peninsula, however, the present-day San Andreas fault is completely within a Franciscan terrane, and the Pilarcitos fault, located southwest of the San Andreas, marks the Salinian-Franciscan boundary. This circumstance has evoked two different explanations: either the Pilarcitos is a thrust fault that has pushed Franciscan rocks over Salinian rocks or the Pilarcitos is a transform fault that has accommodated significant right-lateral slip. In an effort to better resolve the subsurface structure of the peninsula faults, we established a temporary network of 31 seismographs arrayed across the San Andreas fault and the subparallel Pilarcitos fault at ∼1–2 km spacings. These instruments were deployed during the first 6 months of 1995 and recorded local earthquakes, air gun sources set off in San Francisco Bay, and explosive sources. Travel times from these sources were used to augment earthquake arrival times recorded by the Northern California Seismic Network and were inverted for three-dimensional velocity structure. Results show lateral velocity changes at depth (∼0.5–7 km) that correlate with downward vertical projections of the surface traces of the San Andreas and Pilarcitos faults. We thus interpret the faults as high-angle to vertical features (constrained to a 70°–110° dip range). From this we conclude that the Pilarcitos fault is probably an important strike-slip fault that accommodated much of the right-lateral plate boundary strain on the peninsula prior to the initiation of the modern-day San Andreas fault in this region sometime after about 3.0 m.y. ago.

Journal of Geophysical Research B: Solid Earth↗

USGS1999

Assessment of Mars Pathfinder landing site predictions

Remote sensing data at scales of kilometers and an Earth analog were used to accurately predict the characteristics of the Mars Pathfinder landing site at a scale of meters. The surface surrounding the Mars Pathfinder lander in Ares Vallis appears consistent with orbital interpretations, namely, that it would be a rocky plain composed of materials deposited by catastrophic floods. The surface and observed maximum clast size appears similar to predictions based on an analogous surface of the Ephrata Fan in the Channeled Scabland of Washington state. The elevation of the site measured by relatively small footprint delay-Doppler radar is within 100 m of that determined by two-way ranging and Doppler tracking of the spacecraft. The nearly equal elevations of the Mars Pathfinder and Viking Lander 1 sites allowed a prediction of the atmospheric conditions with altitude (pressure, temperature, and winds) that were well within the entry, descent, and landing design margins. High-resolution (~38 m/pixel) Viking Orbiter 1 images showed a sparsely cratered surface with small knobs with relatively low slopes, consistent with observations of these features from the lander. Measured rock abundance is within 10% of that expected from Viking orbiter thermal observations and models. The fractional area covered by large, potentially hazardous rocks observed is similar to that estimated from model rock distributions based on data from the Viking landing sites, Earth analog sites, and total rock abundance. The bulk and fine-component thermal inertias measured from orbit are similar to those calculated from the observed rock size-frequency distribution. A simple radar echo model based on the reflectivity of the soil (estimated from its bulk density), and the measured fraction of area covered by rocks was used to approximate the quasi-specular and diffuse components of the Earth-based radar echos. Color and albedo orbiter data were used to predict the relatively dust free or unweathered surface around the Pathfinder lander compared to the Viking landing sites. Comparisons with the experiences of selecting the Viking landing sites demonstrate the enormous benefit the Viking data and its analyses and models had on the successful predictions of the Pathfinder site. The Pathfinder experience demonstrates that, in certain locations, geologic processes observed in orbiter data can be used to infer surface characteristics where those processes dominate over other processes affecting the Martian surface layer. Copyright 1999 by the American Geophysical Union.

Journal of Geophysical Research E: Planets↗

USGS1997

The roles of time and displacement in velocity-dependent volumetric strain of fault zones

The relationship between measured friction μ A and volumetric strain during frictional sliding was determined using a rate and state variable dependent friction constitutive equation, a common work balance relating friction and volume change, and two types of experimental faults: initially bare surfaces of Westerly granite and rock surfaces separated by a 1 mm layer of less than 90 μm Westerly granite gouge. The constitutive equation is the sum of a constant term representing the nominal resistance to sliding and two smaller terms: a rate dependent term representing the shear viscosity of the fault surface (direct effect), and a term which represents variations in the area of contact (evolution effect). The work balance relationship requires that μ A differs from the frictional resistance that leads to shear heating by the derivative of fault normal displacement with respect shear displacement, d δ n / d δ s . An implication of this relationship is that the rate dependence of d δ n / d δ s contributes to the rate dependence of μ A . Experiments show changes in sliding velocity lead to changes in both fault strength and volume. Analysis of data with the rate and state equations combined with the work balance relationship preclude the conventional interpretation of the direct effect in the rate and state variable constitutive equations. Consideration of a model bare surface fault consisting of an undeformable indentor sliding on a deformable surface reveals a serious flaw in the work balance relationship if volume change is time-dependent. For the model, at zero slip rate indentation creep under the normal load leads to time-dependent strengthening of the fault surface but, according to the work balance relationship, no work is done because compaction or dilatancy can only be induced by shearing. Additional tests on initially bare surfaces and gouges show that fault normal strain in experiments is time-dependent, consistent with the model. This time-dependent fault normal strain, which is not accounted for in the work balance relationship, explains the inconsistency between the constitutive equations and the work balance. For initially bare surface faults, all rate dependence of volume change is due to time dependence. Similar results are found for gouge. We conclude that μ A reflects the frictional resistance that results in shear heating, and no correction needs to be made for the volume changes. The result that time-dependent volume changes do not contribute to μ A is a general result and extends beyond these experiments, the simple indentor model and particular constitutive equations used to illustrate the principle.

Journal of Geophysical Research B: Solid Earth↗

USGS2012

Geology of the Mount St. Helens area: Record of discontinuous volcanic and plutonic activity in the Cascade Arc of southern Washington

The Quaternary edifice of Mount St. Helens volcano was built upon a deeply eroded terrane of gently folded and altered volcanic and plutonic rocks that represent the core of the Tertiary Cascade magmatic arc. These rocks constitute an east dipping homoclinal sequence, several kilometers thick, of subaerially erupted mafic to silicic flows and volcaniclastic strata; K‐Ar ages from this section range from about 28 to 23 Ma (late Oligocene and earliest Miocene), which corresponds to an apparent lull in Cascade volcanism to the north of Mount Rainier. Volcanism was essentially continuous during this period of time, and neither a well‐defined base nor top of the section is exposed within the mapped area. Basalt and basaltic andesite dominate the lower part of the mid‐Tertiary section, whereas andesitic and dacitic rocks comprise most of the upper part. This section was intruded by numerous mafic to silicic dikes, sills, and irregular plutonic bodies, most no more than a few million years younger than their host rocks, and subjected to pervasive burial metamorphism and widespread hydrothermal alteration. Large areas of hornfelsed rock surrounding even relatively small intrusions indicate that the proportion of plutonic rock becomes significantly greater at shallow depth beneath the existing erosion surface. A large granitic pluton intruded the mid‐Tertiary section north of Spirit Lake at about 21 Ma. The Earl porphyry copper deposit occurs within the pluton but appears too young (17 Ma) to be genetically related to it. In contrast to the rather continuous and voluminous Oligocene to early Miocene activity, volcanism since then in the Mount St. Helens area has been localized and Volumetrically minor. Products of three younger eruptive periods have been recognized: a sequence of 15 m.y. old pyroxene andesite flows resting unconformably on mid‐Tertiary strata south of Mount St. Helens, widespread shallow dikes and sills of pyroxene andesite between 10 and 8 m.y. old, and compositionally diverse rocks erupted during the past 3 m.y. The Quaternary lavas are more potassic than the Tertiary lavas and typically contain phenocrysts of hornblende and biotite, which are absent from the older rocks. A number of Tertiary structures define a broad NNE trending zone that may reflect a deep‐seated lithospheric flaw that has controlled the locus of Cascade magmatism in southern Washington for the past 25 m.y. Mount St. Helens lies within this zone at the intersection of the NNW striking St. Helens seismic zone (SHZ) and an ENE trending alignment of Pleistocene silicic plug‐domes. No surface breakage has been detected along the SHZ, which is apparently very young. The linear zone of silicic vents is probably controlled by a fault that has been interpreted from seismic records to occur directly beneath the volcano. This zone parallels the directions of regional maximum horizontal compressive stress and North America/Juan de Fuca plate convergence. Mount St. Helens is an example of a low‐volume tectonically controlled magmatic system in an early stage of development.

Washington↗

USGS2018

Quantifying uncertainty in cumulative surface slip along the Cucamonga Fault, a crustal thrust fault in southern California

Studies of historic earthquake ground surface ruptures show that displacements along strike are spatially variable. As a result, latest Quaternary slip rates developed from a spatially restricted set of cumulative displacement measurements may not accurately represent fault velocity. Here we examine the uncertainties associated with slip on the Cucamonga Fault, which is part of a network of faults that have generated damaging historical earthquakes in and around Los Angeles, California. Numerous scarps along its ~25‐km length are well expressed on alluvial fans. We make 310 measurements of vertical separation across the scarps using lidar data. We show that the dispersion of the vertical separations cannot be explained by our best estimates of analytical uncertainties alone. Additional epistemic uncertainties are required. We find that the magnitude of the required epistemic uncertainty is typically larger than analytical uncertainty by a factor of 3 and typically about 22% of the maximum vertical separation. These relationships appear to hold at several spatial scales. We examine three potential sources of epistemic uncertainty and find that none among surface age uncertainty, fault dip, and anthropogenic landscape alteration is likely sufficient to explain the overdispersion of the data, which suggests differences in cumulative strain along the strike of the fault. We calculate a range of dip‐slip rates between 0.4 and 2.6 mm/year. In light of our results, we suggest that future thrust‐fault slip‐rate studies adopt an epistemic uncertainty of 22% of the maximum value for vertical separation measurements, unless there are sufficient data to demonstrate otherwise.

California↗

USGS2012

Experimental deformation of topaz crystals: Possible embrittlement by intracrystalline water

Crystallographically oriented single‐crystal prisms of gem quality topaz (composition AlSiO (OH− F) where x = 0.04 ± 0.01) were deformed at a confining pressure of 1.50 GPa, a temperature of 800°C, and a strain rate of 2×10 s. Under nearly identical conditions, all crystals of anhydrous rock‐forming minerals that have been tested to date, such as olivine, quartz, feldspars, pyroxenes, and refractory oxides, deform plastically; in contrast, our topaz crystals failed by brittle fracture regardless of the orientation of the compression direction. No optical evidence for plastic deformation was detected. Another suite of experiments with compression perpendicular to the (001) cleavage at = 100°–950°C and a strain rate of 2×10 s displayed two regimes of behavior: (1) at >400°C, fracture strength was independent of temperature, and fracture occurred on one or two surfaces parallel to {103}; (2) at <400°C, the fracture strength increased rapidly with decreasing temperature, no macroscopic stress drop was observed, and many closely spaced conjugate fractures formed on (103) and (103). The anomalous brittleness of topaz compared to anhydrous silicate and oxide crystals indicates that intracrystalline “water” plays a role in the embrittlement. We suggest that water within the topaz crystals promotes fracture in ways similar to the mechanisms of slow crack growth aided by environmental moisture.

Journal of Geophysical Research B: Solid Earth↗

USGS2009

Observations of periglacial landforms in Utopia Planitia with the High Resolution Imaging Science Experiment (HiRISE)

The region of western Utopia Planitia (80-105 degreesE, 40-55 degrees N) displays several types of landforms similar to Earth periglacial features, including scallop-shaped depressions and networks of polygonal terrains. The scalloped depressions have been proposed to originate from thermokarstic processes such as sublimation and/or melting of near-surface ground ice. Using HiRISE imagery, we characterize these depressions and several associated, distinct polygon networks in unprecedented morphologic and topographic detail and investigate support for an ice-based degradation process. The scalloped depressions and interior polygons and ridges are found to evolve together, mainly influenced by sublimation, local proximity of ground ice to the surface, and obliquity variations.

Journal of Geophysical Research↗

USGS2009

Tracking magma volume recovery at Okmok Volcano using GPS and an unscented kalman filter

Changes beneath a volcano can be observed through position changes in a GPS network, but distinguishing the source of site motion is not always straightforward. The records of continuous GPS sites provide a favorable data set for tracking magma migration. Dense campaign observations usually provide a better spatial picture of the overall deformation field, at the expense of an episodic temporal record. Combining these observations provides the best of both worlds. A Kalman filter provides a means for integrating discrete and continuous measurements and for interpreting subtle signals. The unscented Kalman filter (UKF) is a nonlinear method for time‐dependent observations. We demonstrate the application of this technique to deformation data by applying it to GPS data collected at Okmok volcano. Seven years of GPS observations at Okmok are analyzed using a Mogi source model and the UKF. The deformation source at Okmok is relatively stable at 2.5 km depth below sea level, located beneath the center of the caldera, which means the surface deformation is caused by changes in the strength of the source. During the 7 years of GPS observations more than 0.5 m of uplift has occurred, a majority of that during the time period January 2003 to July 2004. The total volume recovery at Okmok since the last eruption in 1997 is ∼60–80%. The UKF allows us to solve simultaneously for the time‐dependence of the source strength and for the location without a priori information about the source. 2009 by the American Geophysical Union.

Alaska↗