USGS Science⌕ Search

SEARCH · USGS Science

Results for “Journal of Applied Volcanology”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

1,659 records · Page 15Linked to original sources
USGS2026

From landslide susceptibility to risk assessment in the conterminous U.S.

Understanding the spatial distribution of landslide prone-areas and what consequences they may have is important for risk management and land-use planning. In the United States, although landslides occur in every state, a comprehensive landslide risk assessment is still missing. Existing efforts, such as the Federal Emergency Management Agency (FEMA)’s National Risk Index, rely on aggregated products and coarse cartographic units, limiting their geomorphological and practical accuracy. In this study, we present a methodological advance for landslide risk assessment across large areas with incomplete and sparse data. We apply our procedures to the conterminous United States by integrating geomorphologically meaningful partitions and spatial and temporal probability data-driven models. Landslide susceptibility is estimated using a Generalized Additive Mixed Model incorporating a bias capture/correction scheme to account for inventory inaccuracies (reference Area Under the Curve = 0.75). The exceedance probabilities of landslide occurrence are defined for three temporal scenarios (2, 5, and 10 year). Then, we explore the associated potential economic consequences for human settlements and agricultural areas. The findings indicate that the spatial variability of risk is primarily controlled by exposure rather than by susceptibility/hazard alone. The mean risk increases by ∼170% from the 2-year to the 10-year scenario. Beyond its quantitative outcomes, this study offers a blueprint for continental or sub-continental scale landslide risk assessments, demonstrating both the opportunities and current limitations.

Engineering Geology↗
USGS2025

Global patterns of coseismic landslide runout mobility differ from aseismic landslide trends

Coseismic landslides significantly contribute to human and economic losses during and immediately following earthquakes, yet very little data on the runout of such landslides exist. While well-established behavior of aseismic (e.g., hydrologically triggered) landslide runout mobility suggests strong correlation between landslide size and mobility, limited studies of coseismic landslide runout find conflicting mobility trends. We present a global dataset of runout lengths produced from a new automated method for estimating landslide runout, developed and validated using 1726 manually mapped landslides from five unique earthquakes. We then apply the automated runout tool to 23 global earthquake-induced landslide inventories, producing a compiled database of 73,665 measured and estimated runout lengths of coseismic landslides to assess mobility trends. We find a significant divergence between well-established aseismic mobility trends and that of coseismic landslides, with far greater scatter and more complex mobility patterns in earthquake-triggered landslides. As a function of landslide size, we observe global coseismic landslide mobility patterns are bilinear, becoming increasingly less mobile with increasing size above some threshold. This discordance between aseismic and coseismic landslide mobility may be a function of landslide type, kinematics, hydrology, and or setting that systematically differ between triggering mechanisms and should be explored in more depth to develop predictive models of these unique runout patterns. These results suggest hazard and risk models for coseismic landslides may significantly under-predict or over-predict impacts, depending on the size of triggered landslides.

Engineering Geology↗
USGS2025

Estimated ultimate recovery (EUR) Prediction for Eagle Ford Shale using integrated datasets and artificial neural networks

The estimated ultimate recovery (EUR) is an important parameter for forecasting oil and gas production and informing decisions regarding field development strategies. In this study, we combined site-specific geologic, completion, and operational parameters with the predictive capabilities of machine learning (ML) models to predict EURs of the wells for the Eagle Ford Marl Continuous Oil Assessment Unit. We developed an extensive dataset of wells that have produced from the lower and upper Eagle Ford Shale intervals and reduced the model complexity using principal component analysis. We tested the ML models and estimated the sensitivities of ML-predicted EURs to changes in the values of different input variables. The results of applying the optimized ML model to the Eagle Ford suggest that the approach developed in this study could be promising. The ML estimates of the EURs fit the DCA-based values with an R 2 ~ 0.9 and a mean absolute error of ~36 × 10 3 bbl. In the lower Eagle Ford Shale, the EUR estimates were found to be most sensitive to changes in porosity, net thickness of the interval, clay volume, and the API gravity of the oil; and that in the upper Eagle Ford Shale they were most sensitive to changes in the total organic carbon and water saturation, which suggests that it could be important to consider these parameters in assessing these intervals or close analogs.

Louisiana, Mississippi, Texas↗
USGS2025

Review and synthesis of the applications of machine learning to coalbed methane recovery

Over the last 30 years, a substantial literature has evolved on the use of machine learning (ML) to assess, predict, and improve the efficiency of coalbed methane (CBM) recovery. In the United States, the production of CBM declined as shale gas production matured, but CBM continues to be an important energy resource in other parts of the world. ML applications that have the potential to improve CBM reservoir management and production forecasts, and to increase exploration and operational efficiency, are still of significant interest. The integration of geostatistical techniques into the CBM ML applications has been largely absent but represents an opportunity for improvement. The literature demonstrates the widespread interest in, and applicability of, ML algorithms applied to CBM problems, and that they continue to result in improvements in predictive performance. However, (1) much of the research is more academic than operational, (2) many results are based on simulations, or small or proprietary datasets, (3) ML performance information can be inconsistent and sometimes entirely omitted, (4) most methodologies are unique to the specific CBM situation and likely not generalizable, (5) no standard data repositories are available to directly compare the performance of competing algorithms, and (6) the spatial component is often omitted. Finally, relatively new ML protocols involving causality analysis and reinforced learning, as well as hybrid workflows combining both supervised and unsupervised learning, are anticipated to dominate the future investigations. Integration of geostatistical and geospatial analysis with ML should enhance performance.

Book chapter↗
USGS2026

3D semantic mapping of surface geological features

Semantic mapping in 3D is fundamental to a wide range of geoscientific studies and applications, including geomorphology, hazard assessment, and environmental monitoring. However, automatically segmenting geological features from large-scale photogrammetric datasets remains a significant challenge. We present a methodology to address this gap. Using overlapping images collected over environments of interest, Structure-from-Motion (SfM) produces georeferenced point clouds and estimates camera poses. Existing large vision models, such as Segment Anything Model, segment objects in the images, generating pixel-segmentation associations. To produce pixel-point associations, we project the points back onto the camera image planes. As objects are independently segmented across multiple images with different perspectives, we develop a segmentation mosaicking algorithm to build probabilistic point-segmentation associations that combines the pixel-segmentation associations and pixel-point associations. Our methodology is validated using both synthetic data generated by Kubric and real-world UAV-SfM data. The implementation is designed to be compatible with existing SfM software, including Agisoft and OpenDroneMap, for photogrammetry mapping in geoscience studies. As a case study, we apply our method to the semantic mapping of precariously balanced rocks (PBRs), which provide upper-bound constraints on historical ground motion shaking intensity. To support object-level identification of PBRs, we additionally integrated Grounding DINO, enabling text-prompted segmentation of features of interest within UAV imagery. This case study demonstrates the effectiveness of our method in generating a 3D semantic map of PBRs, enabling spatial distribution of PBR fragility for earthquake hazard analysis.

Computers & Geosciences↗
USGS2026

The United States Magnetotelluric Array and the National Impedance Map

The United States Magnetotelluric Array (USMTArray) data set, collected in the years 2006–2024, consists of more than 1,700 long-period magnetotelluric stations covering the entirety of the contiguous United States on a quasi-regular 70 km grid. Funding across multiple federal agencies was critical to sustaining this effort to its completion. Important components of the project included active guidance and participation from the MT community, the open and timely availability of all data, and the application of consistent instrumentation and robust data processing. Together with parallel advancement in the development of publicly available three-dimensional (3D) inversion codes, the USMTArray has revitalized the US magnetotelluric community and increased the visibility of magnetotellurics within the Earth-science community. Taken as a whole, these data are visualized as the National Impedance Map, which, together with a 3D synthesis conductivity model of the nation, reveals the electrical architecture of the contiguous US. USMTArray data are used by researchers worldwide for fundamental and applied studies, including investigations of continental architecture and evolution, estimation of hazards to critical infrastructure due to geomagnetic storms, and assessment of the nation's undiscovered geothermal and mineral resources. We here review the history and development of the project, discuss the challenges and successes in its execution, present the National Impedance Map and synthesis conductivity model, and highlight the breadth of research stemming from this rich data set.

conterminous United States↗
USGS2026

An improved empirical model for predicting postfire debris-flow volume in the western United States

Reliable estimates of debris-flow volume can be used to help predict the magnitude of debris-flow hazards following wildfire in the western United States. In this study, we compiled and used a database of 227 postfire debris-flow volumes that were collected across the western United States to develop a multiple linear regression model for predicting postfire debris-flow volume. We explored 36 predictor variables related to rainfall, terrain, and fire characteristics, and selected the model with the combination of variables that yielded the most accurate predictions of debris-flow volume. We evaluated model performance against the entire volume database, as well as against four subsets of volume data from southern California, the Intermountain West, the Southwest, and regions with limited volume data, such as northern California and Washington. We also compared model performance against 3 existing postfire debris-flow volume models that were developed for use in southern California, the Intermountain West, and the Southwest. We demonstrate that the new volume model performs as well as the regional models in the regions for which they were developed and outperforms existing models when applied to volumes from data-limited regions in the western United States. These results indicate that the debris-flow volume model introduced in this study can be used to improve postfire hazard assessments across the western United States, especially outside of southern California.

Arizona, California, Colorado, New Mexico, Utah, W↗
USGS2025

An exploration of the relative influence of physical models for Omori’s law

Omori’s law states that the rate of aftershocks decays as a function of inverse time. There are multiple physical explanations that we reduce into a nonlinear mixed effects relation of three terms: (1) a Rate/State expression that can account for static/dynamic and viscoelastic triggering caused directly by the mainshock, (2) a fluid diffusion triggering term, and (3) a randomized secondary triggering (cascade) term. We fit free physical-model parameters to an observed aftershock sequence through two nonlinear regression methods to find the relative contributions of physics-based models in an observed aftershock sequence. Results from both methods show that Rate/State models overpredict aftershock rates by ∼0–30%. Secondary aftershocks cause a net negative contribution (seismicity rate reduction that corrects overprediction by other terms) ranging between ∼0 and 30%. All regression solutions yield negative secondary triggering contributions without being guided to do so. A physical explanation for this is that aftershock occurrence relieves stress from the crust, ultimately causing the sequence to extinguish itself. Fluid diffusion triggering contributions range from ∼0 to 20%. Diffusion processes are observed to be shorter in time than the full duration of an aftershock sequence and they are also spatially limited, diminishing their influence. Our results apply to an aftershock decay curve from the 2016 Central Apennines earthquake sequence, meaning that our specific results may not be general. Our primary conclusion is that any one physical model cannot alone fit the observed sequence as well as the combination of three we investigated.

Frontiers in Earth Science↗
USGS2024

Characteristics of the fault damage zone From high-resolution seismic imaging along the Palos Verdes Fault, California

The distribution and intensity of fault damage zones provides insight into fault activity and its relationship to fluid flow in the crust. Presently, measures of the in-situ distribution of fault damage remain limited and along-strike studies are rare. This study focuses on an offshore section Palos Verdes Fault damage zone that spans 28 km, near Los Angeles, California. To investigate the previously unresolved shallow (∼400 m below the seafloor) fault damage zone we use densely spaced (∼500 m line separation) newly collected sparker multichannel seismic lines and sub-bottom profiles. The combination of high-resolution acquisition methods and specialized seismic processing workflows provide improved imaging of shallow faulting. We apply a multi-trace similarity technique to identify discontinuities in the seismic data that may be attributed to faults and fractures. This fault detection approach reveals diverse fault damage patterns on adjacent seismic profiles. However, a discernible damage zone pattern emerges by stacking multiple damage detection profiles along strike. We find that peak damage identified in this way corresponds to the active main fault strand, confirmed in this study, and thus the technique may be useful for identifying active fault strands elsewhere. Additionally, we observe that the variable width of the damage zone along strike is controlled by fault obliquity. Furthermore, our observations reveal a correlation between fault damage and seafloor fluid seeps visible in the water column, suggesting that damage plays a role in controlling fluid flow around the fault.

California↗
USGS2025

Remote single-station seismic monitoring of the July–October 2022 earthquake swarm at Tau volcano, American Samoa

From July to October 2022, a non-eruptive volcanic earthquake swarm occurred within ~15 km of Taʻū Island, located in eastern American Samoa. Felt reports from local residents were the only available information about the swarm when it started, as American Samoa lacked a seismic monitoring network. We developed a consistent single-station catalog for the entire swarm, using seismic data from the nearest station IU.AFI, ~250 km away. We applied the EQTransformer deep-learning model (Mousavi et al., 2020), automatically picking Pn and Sn arrivals on IU.AFI continuous data. We retained only events with Sn-Pn times of 22.5–25 seconds, consistent with the expected locations based on felt reports, then detected smaller swarm events with subsequent template-matching. This single-station catalog characterized the swarm’s onset and escalation to peak activity before a multi-agency field response team installed a local seismic network in mid-August 2022. This permanent seismic network captured the swarm’s decline. EQTransformer identified short S-P times on the first two locally deployed seismometers, both Raspberry Shake sensors, to constrain the swarm’s distance from Taʻū Island. Modern seismological processing methods, combined with basic observations such as felt reports, can quickly contribute useful information during an earthquake response in a poorly monitored region.

American Somoa↗
USGS2025

Earthquake stress drop, source spectra from laboratory experiments, and the apparent unsteadiness of frictional slip

Over a range of co-seismic total energy release, high sample rate slip, stress, and slip velocity measurements were made during frictional failure to determine seismic source properties. The near-field measurements were used to estimate stress drops using spectral approaches that are analogous to the standard seismological moment-corner determined Δσ and acceleration amplitude Δσ arms stress drops. Rapid frictional sliding produces slip velocity amplitude spectra that vary with frequency -1 so long as the energy dissipated by friction approaches the total energy release. Under these conditions Δσ and Δσ arms are similar in size. Since these are nearly direct measurements of fault slip velocity and because they produce flat acceleration spectra between the corner and an apparent fmax, friction in these experiments seems to produce dynamic acceleration and deceleration at all resolved frequencies. The physical origin of this unsteady motion is not known exactly but likely reflects rapid dynamic variations in fault strength or applied stress. On the other hand, when the total energy stored prior to failure is artificially made somewhat larger relative to that which can be dissipated by friction the velocity spectra vary with frequency -2 immediately below the corner. At these conditions Δσ and Δσ arms diverge. The excess stored energy is preferentially partitioned into radiated energy upon failure. Collectively the experiments imply that to produce unsteady, white noise accelerations that are observed for natural earthquakes, requires that at least 95% of the energy released does not escape the source region to be radiated to the far-field.

Bulletin of the Seismological Society of America↗
USGS2024

Testing rate‐and‐state predictions of aftershock decay with distance

We analyze aftershocks of the 2019 M 7.1 Ridgecrest mainshock and isolated M 5–6 mainshocks in southern California to test predictions made by the rate‐and‐state friction model of Dieterich (1994) . Rate‐and‐state friction predicts that the seismicity rate after a stress step follows Omori decay, where the Omori c ‐value, which is the saturation in aftershock rate observed at small times, is larger for smaller stress steps. Put in the context of an aftershock sequence, this predicts that the Omori c ‐value will be systematically larger at greater distances from the mainshock. To our knowledge, this predicted effect has not been observed. In part this may be because the Omori c ‐value is difficult to measure because it often reflects short‐term catalog incompleteness rather than a true saturation in aftershock rate. We explore the dependence of the Omori c ‐value on the distance to the mainshock by applying the “ a ‐positive” method ( van der Elst and Page, 2023 ). This method is insensitive to short‐term aftershock incompleteness and allows resolution of the true aftershock rate deep into the mainshock coda. For aftershocks of the Ridgecrest mainshock and stacked M 5–6 mainshocks, we observe systematic differences in early aftershock rates, relative to mainshock distance, consistent with the predictions of rate‐and‐state friction. Furthermore, for the larger Ridgecrest dataset, we observe that aftershocks nearer to the mainshock start earlier, and we resolve a flattening of the Omori curve consistent with a larger Omori c ‐value for the farthest aftershocks, as predicted by Dieterich (1994) .

Seismological Research Letters↗
USGS2025

Characterizing the scale of regional landslide triggering from storm hydrometeorology

Rainfall strongly affects landslide triggering; however, understanding how storm characteristics relate to the severity of landslides at the regional scale has thus far remained unclear, despite the societal benefits that would result from defining this relationship. As mapped landslide inventories typically cover a small region relative to a storm system, here we develop a dimensionless index for landslide-inducing rainfall, A * , based on extremes of modeled soil water relative to its local climatology. We calibrate A * using four landslide inventories, comprising over 11 000 individual landslides over four unique storm events, and find that a common threshold can be applied to estimate regional shallow-landslide-triggering potential across diverse climatic regimes in California (USA). We then use the spatial distribution of A * , along with topography, to calculate the landslide potential area (LPA) for nine landslide-inducing storm events over the past 20 years, and we test whether atmospheric metrics describing the strength of landfalling storms, such as integrated water vapor transport, correlate with the magnitude of hazardous landslide-inducing rainfall. We find that although the events with the largest LPA do occur during exceptional atmospheric river (AR) storms, the strength of landfalling atmospheric rivers does not scale neatly with landslide potential area, and even exceptionally strong ARs may yield minimal landslide impacts. Other factors, such as antecedent soil moisture driven by storm frequency and mesoscale precipitation features within storms, are instead more likely to dictate the patterns of landslide-generating rainfall throughout the state.

California↗
USGS2026

Small earthquake moment magnitude and implications for frequency–magnitude scaling of injection induced earthquakes of the Raton Basin

Accurate estimation of earthquake source parameters—such as moment magnitudes, corner frequencies, and stress drops—is essential for improving seismic hazard assessments and understanding earthquake physics. In this study, moment magnitudes ( M W ) are calculated for 31,581 earthquakes associated with wastewater injection in the Raton Basin (located along the border between northern New Mexico and southern Colorado) between 2016 and 2024 using radiative transfer theory to fit coda decay envelopes. Our results show that it is feasible to estimate moment magnitudes down to M W ~1 with coda envelopes from a small local monitoring network. Significant differences were found between M W and local magnitudes ( M L ) for small earthquakes ( M < 3.0). A linear relationship was optimized to convert M L to M W : M W = 0.7 M L + 0.96 and M W = 0.73 M L + 0.99 (for the events reported by the U.S. Geological Survey), which can be applied in future studies of Raton Basin seismicity. We find that b -values calculated employing different methods and using M L are approximately 1.0, while those using M W range from 1.2 to 1.4. A larger estimate of the b -value could influence interpretations of the statistical behavior of earthquakes associated with injection and consequently seismic hazard assessments based on a magnitude–frequency distribution. The potential differences between local versus moment magnitude-based earthquake statistics should be considered in other seismically active regions.

Colorado, New Mexico↗
USGS2026

Software to support remote sensing of river discharge based on critical flow theory

Water resource management requires accurate observations of streamflow but standard field methods for measuring river discharge ( Q ) are costly and can be hazardous for equipment and personnel. Remote sensing has become a viable alternative, but many image-based techniques require field data for calibration and depth and velocity can seldom be mapped with a single sensor. A new approach based on critical flow theory, in contrast, allows both of these attributes to be inferred from readily available image data. This technique only pertains to sites with standing waves, called undular hydraulic jumps (UHJs), but a recent investigation demonstrated its potential to provide accurate discharge estimates. This paper introduces software designed to facilitate Inferring Q from UHJs Identified in River Images (InQUIRI). The package includes modules for retrieving data from image servers, making the measurements of wavelength and width required to calculate discharge, inferring a representative wavelength from a profile digitized along a wave train, combining multiple estimates to obtain an ensemble median discharge, and assessing accuracy via comparison to gage records from the U.S. Geological Survey. By making these steps easier to implement, InQUIRI enables users to apply the workflow to a variety of UHJ-containing images. Accumulating more case studies, some successful and others less so, would help constrain the range of applicability of the critical flow approach and foster development of refined guidelines for selecting and measuring waves. The software described herein could play an important role in promoting informed use of this new technique for non-contact streamflow measurement.

Arizona, Colorado, New Mexico, Utah↗
USGS2026

Revisiting the utility of regional-scale, high-quality geophysical data in mineral exploration - A case study featuring the Mammoth Magnetic Anomaly, Pinal County, Arizona

Regional aeromagnetic surveys passively measure the total magnetic intensity (TMI) and are a foundational tool used in mineral exploration (Airo, 2015). With the increased global demand and the number of critical mineral resources required for manufacturing high-tech devices, developing high-quality, regional-scale geophysical surveys could aid critical mineral exploration efforts and geologic mapping. In 2019, the U. S. Geological Survey launched the Earth Mapping Resources Initiative (Earth MRI) to modernize the geologic and geophysical mapping of regions that have the potential to contain critical mineral resources within the United States. In support of planning Earth MRI geophysical surveys, Drenth and Grauch (2019) defined five aeromagnetic data quality rankings (rank 1 through rank 5) applying them to the airborne geophysical survey inventory of the United States (Johnson et al., 2021). Rank 1 aeromagnetic surveys are of the highest quality, meeting modern standards and allowing best practices for qualitative and quantitative interpretation; whereas rank 5 aeromagnetic surveys are of the lowest quality, being useful only for qualitative interpretation of broad features. Through the Earth MRI effort, 48 high-quality, regional-scale rank 1 and 2 airborne magnetic and radiometric geophysical surveys have been planned, collected, or publicly release through May 2025 (U. S. Geological Survey, 2025). Here, a portion of a rank 1 Earth MRI aeromagnetic survey in southeast Arizona is presented and compared to a legacy rank 5 aeromagnetic survey over the Mammoth Magnetic Anomaly (MMA), demonstrating how modern, high-quality aeromagnetic data improves our view of crustal geology, aiding mineral exploration.

Arizona↗
USGS2025

Updating regional‐scale geospatial liquefaction models with locally available geotechnical data

We present a method to update the geospatial liquefaction model used by the U.S. Geological Survey’s near‐real‐time ground failure product with subsurface geotechnical data. The geospatial model estimates liquefaction probability from peak ground velocity (via ShakeMap) and geospatial susceptibility proxies. In many regions, additional information relevant to constraining liquefaction likelihood is also available, including surface geology maps and subsurface geotechnical measurements. There is currently no mechanism to use these data in the ground failure product liquefaction model, even though these data could provide more precise constraints on spatial variations in the lithologic character of the soil (surface geology) and direct measurements of the subsurface mechanical properties that affect liquefaction occurrence and severity (geotechnical measurements). In this study, we develop a method to integrate these data with the geospatial model and assess how these data can improve regional‐scale predictions. We develop a Bayesian updating framework and apply it to the 1989 magnitude 6.9 Loma Prieta, California, earthquake, for which mapped observations are available to evaluate performance. We constrain the Bayesian framework with 373 Northern California cone penetration tests and liquefaction susceptibility classes based on the mapped surface geology. This Bayesian model incorporates geotechnical information into the geospatial model and more accurately predicts liquefaction occurrences than the geospatial model, while sacrificing less accuracy in terms of predicting the absence of liquefaction than the geotechnical model. In future applications, this approach could be adapted to update other geospatial models using locally available subsurface data.

California↗
USGS2026

Continuous monitoring and temporal variability of fluorescence of dissolved organic matter in karst groundwater of the Edwards aquifer, south-central Texas, 2019–24

Widespread urbanization on the Edwards aquifer recharge zone in south-central Texas has prompted the development of new approaches and tools for evaluating the current and future status of water quality in the San Antonio and Barton Springs segments of the Edwards aquifer. The U.S. Geological Survey, in cooperation with the San Antonio Water System and the City of Austin, applied continuous monitoring of fluorescence of dissolved organic matter (fDOM) to characterize the sources and transport of dissolved organic matter and associated constituents in the Edwards aquifer. Continuous fDOM time-series data were adjusted using empirically derived temperature, turbidity, and inner-filter-effect correction factors prior to analysis and interpretation. Fully corrected fDOM time-series data from the study sites were evaluated for short- and long-term temporal variability in fDOM in the context of the hydrologic and climatic conditions that occurred during the 5-year study period to understand vulnerability of the aquifer to potential contaminants in recharge. Study results indicate that fDOM is an effective proxy for dissolved organic carbon that, in turn, is indicative of the influx of recent surface water and associated contaminants, and thus, aquifer vulnerability to those contaminants. Although other continuously monitored water-quality parameters provide insights into changes in water quality in response to varying hydrologic conditions, the quantitative relation between fDOM and dissolved organic carbon directly indicates the timing and magnitude of pulses of organic constituents derived from the land surface, whereas other water-quality parameters do not.

Texas↗