USGS Science⌕ Search

SEARCH · USGS Science

Results for “Island Arc”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15Linked to original sources
USGS2010

Extension in Mona Passage, Northeast Caribbean

As shown by the recent Mw 7.0 Haiti earthquake, intra-arc deformation, which accompanies the subduction process, can present seismic and tsunami hazards to nearby islands. Spatially-limited diffuse tectonic deformation within the Northeast Caribbean Plate Boundary Zone likely led to the development of the submerged Mona Passage between Puerto Rico and the Dominican Republic. GPS geodetic data and a moderate to high level of seismicity indicate that extension within the region is ongoing. Newly-collected high-resolution multibeam bathymetry and multi-channel seismic reflection profiles and previously-collected samples are used here to determine the tectonic evolution of the Mona Passage intra-arc region. The passage is floored almost completely by Oligocene-Pliocene carbonate platform strata, which have undergone submarine and subaerial erosion. Structurally, the passage is characterized by W- to NNW-trending normal faults that offset the entire thickness of the Oligo-Pliocene carbonate platform rocks. The orientation of these faults is compatible with the NE-oriented extension vector observed in GPS data. Fault geometry best fits an oblique extension model rather than previously proposed single-phase, poly-phase, bending-moment, or rotation extension models. The intersection of these generally NW-trending faults in Mona Passage with the N-S oriented faults of Mona Canyon may reflect differing responses of the brittle upper-crust, along an arc-forearc rheological boundary, to oblique subduction along the Puerto Rico trench. Several faults within the passage, if ruptured completely, are long enough to generate earthquakes with magnitudes on the order of Mw 6.5-7. ?? 2010.

Tectonophysics↗
USGS2007

High-resolution airborne gravity imaging over James Ross Island (West Antarctica)

James Ross Island (JRI) exposes a Miocene-Recent alkaline basaltic volcanic complex that developed in a back-arc, east of the northern Antarctic Peninsula. JRI has been the focus of several geological studies because it provides a window on Neogene magmatic processes and paleoenvironments. However, little is known about its internal structure. New airborne gravity data were collected as part of the first high-resolution aerogeophysical survey flown over the island and reveal a prominent negative Bouguer gravity anomaly over Mt Haddington. This is intriguing as basaltic volcanoes are typically associated with positive Bouguer anomalies, linked to underlying mafic intrusions. The negative Bouguer anomaly may be associated with a hitherto unrecognised low-density sub-surface body, such as a breccia-filled caldera, or a partially molten magma chamber.

Open-File Report↗
USGS2009

Petrogenesis of basaltic volcanic rocks from the Pribilof Islands, Alaska, by melting of metasomatically enriched depleted lithosphere, crystallization differentiation, and magma mixing

The Pribilof Islands, Alaska, are located in the Bering Sea in a continental intraplate setting. In this study we examine the petrology and geochemistry of volcanic rocks from St. Paul (0??54-0??003 Ma) and St. George (2??8-1??4 Ma) Islands, the two largest Pribilof Islands. Rocks from St. George can be divided into three groups: group 1 is a high-MgO, low-SiO. 2 suite composed primarily of basanites; group 2 is a high-MgO, high-SiO 2 suite consisting predominantly of alkali basalts; group 3 is an intermediate- to low-MgO suite that includes plagioclase-phyric subalkali basalts and hawaiites. Major and trace element geochemistry suggests that groups 1 and 2 formed by small-degree partial melting of amphibole-bearing to amphibole-free garnet peridotite. Group 1 rocks were the earliest melts produced from the most hydrous parts of the mantle, as they show the strongest geochemical signature of amphibole in their source. The suite of rocks from St. Paul ranges from 14??4 to 4??2 wt % MgO at relatively constant SiO 2 contents (43??1-47??3 wt %). The most primitive St. Paul rocks are modeled as mixtures between magmas with compositions similar to groups 1 and 2 from St. George Island, which subsequently fractionated olivine, clinopyroxene, and spinel to form more evolved rocks. Plagioclase-phyric group 3 rocks from St. George are modeled as mixtures between an evolved melt similar to the evolved magmas on St. Paul and a fractionated group 2 end-member from St. George. Mantle potential temperatures estimated for primitive basanites and alkali basalts are ???1400??C and are similar to those of mid-ocean ridge basalts (MORB). Similarly, 87 Sr/. 86 Sr and 143 Nd/. 144 Nd values for all rocks are MORB-like, in the range of 0??702704-0??703035 and 0??513026-0??513109, respectively. 208 Pb/. 204 Pb vs 206 Pb/. 204 Pb values lie near the MORB end-member but show a linear trend towards HIMU (high time-integrated 238 U/. 204 Pb). Despite isotopic similarities to MORB, many of the major and trace element characteristics are similar to those of ocean island basalts (OIB), including enrichment in alkalis and incompatible trace elements. These characteristics are interpreted to indicate that their mantle source experienced an ancient melt-removal event that is reflected in depleted radiogenic isotopic compositions and was then re-enriched by metasomatism that elevated incompatible trace element contents, but was too young to produce a time-integrated change in radiogenic isotopic ratios. Evidence suggests that the Pribilof Island basalts did not form in either a plume or a back-arc basin tectonic setting. Rather, they were produced by melting of metasomatically hydrated upper mantle peridotite at relatively low temperatures and were able to erupt at the surface through extensional or transtensional faults that served as conduits for the magmas. ?? The Author 2009. Published by Oxford University Press.

Journal of Petrology↗
USGS2014

Seismicity of the Earth 1900-2012 Java and vicinity

The Sunda convergent margin extends for 5,600 km from the Bay of Bengal and the Andaman Sea, both located northwest of the map area, towards the island of Sumba in the southeast, and then continues eastward as the Banda arc system. This tectonically active margin is a result of the India and Australia plates converging with and subducting beneath the Sunda plate at a rate of approximately 50 to 70 mm/yr. The main physiographic feature associated with this convergent margin is the Sunda-Java Trench, which stretches for 3,000 km parallel to the Java and Sumatra land masses and terminates at 120° E. The convergence of the Indo-Australia and Sunda plates produces two active volcanic arcs: Sunda, which extends from 105 to 122° E and Banda, which extends from 122 to 128° E. The Sunda arc results solely from relatively simple oceanic plate subduction, while the Banda arc represents the transition from oceanic subduction to continental collision, where a complex, broad deforming zone is found. Based on modern activity, the Banda arc can be divided into three distinct zones: an inactive section, the Wetar Zone, bound by two active segments, the Flores Zone in the west and the Damar Zone in the east. The lack of volcanism in the Wetar Zone is attributed to the collision of Australia with the Sunda plate. The absence of gap in volcanic activity is underlain by a gap in intermediate depth seismicity, which is in contrast to nearly continuous, deep seismicity below all three sections of the arc. The Flores Zone is characterized by down-dip compression in the subducted slab at intermediate depths and late Quaternary uplift of the forearc. These unusual features, along with GPS data interpretations indicate that the Flores Zone marks the transition between subduction of oceanic crust in the west and the collision of continental crust in the east. The Java section of the Sunda arc is considered relatively aseismic historically when compared to the highly seismically active Sumatra section, despite both areas being located along the same active subduction margin. Shallow (0–20 km) events have occurred historically in the overlying Sunda plate, causing damage to local and regional communities. A recent example was the May 26, 2006 M6.3 left-lateral strike-slip event that occurred at a depth of 10 km in central Java, and caused over 5,700 fatalities. Intermediate depth (70–300 km) earthquakes frequently occur beneath Java as a result of intraplate faulting within the Australia slab. Deep (300–650 km) earthquakes occur beneath the Java Sea and the back-arc region to the north of Java. Similar to other intermediate depth events, these earthquakes are also associated with intraslab faulting. However, this subduction zone exhibits a gap in seismicity from 250 to 400 km, interpreted as the transition between extensional and compressional slab stresses. Historical examples of large intraplate events include: the 1903 M8.1 event, 1921 M7.5 event, 1977 M8.3 event, and August 2007 M7.5 event. Large thrust earthquakes close to the Java trench are typically interplate faulting events along the slab interface between the Australia and Sunda plates. These earthquakes also generally have high tsunamigenic potential due to their shallow hypocentral depths. In some cases, these events have demonstrated slow moment-release and have been defined as ‘tsunami’ earthquakes, where rupture is large in the weak crustal layers very close to the seafloor. These events are categorized by tsunamis that are significantly larger than predicted by the earthquake’s magnitude. The most notable tsunami earthquakes in the Java region occurred on June 2, 1994 (M7.8) and July 17, 2006 (M7.7). The 1994 event produced a tsunami with wave runup heights of 13 m, killing over 200 people. The 2006 event produced a tsunami of up to 15 m, and killed 730 people. Although both of these tsunami earthquakes were characterized by rupture along thrust faults, they were followed by an abundance of normal faulting aftershocks. These aftershocks are interpreted to result from extension within the subducting Australia plate, whereas the mainshocks represented interplate faulting between the Australia and Sunda plates.

Open-File Report↗
USGS1955

Salt-water encroachment as induced by sea-level excavation on Angaur Island

Angaur, southwesternmost of the Palau Islands, 800 miles southwest of Guam, has an area of 3.2 square miles and consists of reef limestone of Pliocene through Recent age. In the northwestern part of the island a basin is formed by a ringlike ridge that has a maximum altitude of 150 feet. To the east and south a series of arc-shaped lower ridges and intervening depressions are concentric with the ring ridge. Beyond these, a low plain with shallow swales composes the remaining two-thirds of the island. The ridges are composed of indurated limestone, whereas the plain is underlain chiefly by unconsolidated coralline fragments. Phosphate has been mined from the three types of topographic depressions since 1908. When power equipment was introduced, excavations were extended below sea level. Lakes formed in these excavations and, despite an annual rainfall of 110 inches, contamination of fresh-water supplies and of agricultural land by salt water resulted from tidal pulsations through the fissured rock. As a result, stoppage of mining was imminent unless remedial measures could be devised. Angaur provides a model of the operations of a Ghyben-Herzberg fresh-water lens on an oceanic island. At numerous lakes, wells, and test holes, continuing observations were made on water levels; amplitude and lag of tidal fluctuations; and mineral content, pH, and temperature of the lens. These observations guided the selection of constantly adjusted remedial measures, which included partitioning of lakes, and bottom filling or back filling of compartments that failed to freshen because of fissures connecting them with the sea. © 1955 Society of Economic Geologists, Inc.

Angaur↗
USGS2013

Seismic evidence for a slab tear at the Puerto Rico Trench

The fore-arc region of the northeast Caribbean plate north of Puerto Rico and the Virgin Islands has been the site of numerous seismic swarms since at least 1976. A 6 month deployment of five ocean bottom seismographs recorded two such tightly clustered swarms, along with additional events. Joint analyses of the ocean bottom seismographs and land-based seismic data reveal that the swarms are located at depths of 50–150 km. Focal mechanism solutions, found by jointly fitting P wave first-motion polarities and S/P amplitude ratios, indicate that the broadly distributed events outside the swarm generally have strike- and dip-slip mechanisms at depths of 50–100 km, while events at depths of 100–150 km have oblique mechanisms. A stress inversion reveals two distinct stress regimes: The slab segment east of 65°W longitude is dominated by trench-normal tensile stresses at shallower depths (50–100 km) and by trench-parallel tensile stresses at deeper depths (100–150 km), whereas the slab segment west of 65°W longitude has tensile stresses that are consistently trench normal throughout the depth range at which events were observed (50–100 km). The simple stress pattern in the western segment implies relatively straightforward subduction of an unimpeded slab, while the stress pattern observed in the eastern segment, shallow trench-normal tension and deeper trench-normal compression, is consistent with flexure of the slab due to rollback. These results support the hypothesis that the subducting North American plate is tearing at or near these swarms. The 35 year record of seismic swarms at this location and the recent increase in seismicity suggest that the tear is still propagating.

Puerto Rico↗
USGS2016

Geologic map of the Sauvie Island quadrangle, Multnomah and Columbia Counties, Oregon, and Clark County, Washington

Introduction The Sauvie Island 7.5' quadrangle is situated in the Puget-Willamette Lowland northwest of downtown Portland, Oreg. This lowland, which extends from Puget Sound to west-central Oregon, is a complex structural and topographic trough between the Coast Range and the Cascade Range. Since late Eocene time, the Cascade Range has been the locus of a discontinuously active volcanic arc associated with underthrusting of oceanic lithosphere beneath the North American continent along the Cascadia Subduction Zone. The Coast Range, which occupies the fore-arc position within the Cascadia arc-trench system, consists of a complex assemblage of Eocene to Miocene volcanic and marine sedimentary rocks. The Sauvie Island quadrangle lies along the southwest margin of the Portland Basin, a 2,000-km 2 topographic and structural depression. The basin boundary is an abrupt topographic break at the base of the Tualatin Mountains, which separates the Portland and Tualatin Basins. The Tualatin Mountains are underlain by lava flows of the Miocene Columbia River Basalt Group that have been folded into an asymmetric anticline. Oligocene marine sedimentary rocks, not exposed at the surface, are inferred to underlie the basalt flows. The abrupt basin boundary marks the location of the northwest-striking Portland Hills Fault Zone, which is probably an active structure. The Columbia River flows west and north through the Portland Basin at nearly sea level. The Willamette River enters the Columbia near the southeast corner of the map area. Seismic-reflection profiles and lithologic logs of water wells show as much as 550 m of late Miocene and younger sediments in the deepest part of the basin east of the quadrangle. Deposits exposed at the surface consist chiefly of Holocene and late Pleistocene fluvial and eolian sediments and man-made fill. This map contributes to a U.S. Geological Survey program to improve the geologic database for the Portland region of the Pacific Northwest urban corridor. The map and ancillary data will support assessments of seismic risk, ground-failure hazards, and resource availability.

Oregon, Washington↗
USGS1994

Geologic framework of the Aleutian arc, Alaska

The Aleutian arc is the arcuate arrangement of mountain ranges and flanking submerged margins that forms the northern rim of the Pacific Basin from the Kamchatka Peninsula (Russia) eastward more than 3,000 km to Cooke Inlet (Fig. 1). It consists of two very different segments that meet near Unimak Pass: the Aleutian Ridge segment to the west and the Alaska Peninsula-the Kodiak Island segment to the east. The Aleutian Ridge segment is a massive, mostly submerged cordillera that includes both the islands and the submerged pedestal from which they protrude. The Alaska Peninsula-Kodiak Island segment is composed of the Alaska Peninsula, its adjacent islands, and their continental and insular margins. The Bering Sea margin north of the Alaska Peninsula consists mostly of a wide continental shelf, some of which is underlain by rocks correlative with those on the Alaska Peninsula. There is no pre-Eocene record in rocks of the Aleutian Ridge segment, whereas rare fragments of Paleozoic rocks and extensive outcrops of Mesozoic rocks occur on the Alaska Peninsula. Since the late Eocene, and possibly since the early Eocene, the two segments have evolved somewhat similarly. Major plutonic and volcanic episodes, however, are not synchronous. Furthermore, uplift of the Alaska Peninsula-Kodiak Island segment in late Cenozoic time was more extensive than uplift of the Aleutian Ridge segment. It is probable that tectonic regimes along the Aleutian arc varied during the Tertiary in response to such factors as the directions and rates of convergence, to bathymetry and age of the subducting Pacific Plate, and to the volume of sediment in the Aleutian Trench. The Pacific and North American lithospheric plates converge along the inner wall of the Aleutian trench at about 85 to 90 mm/yr. Convergence is nearly at right angles along the Alaska Peninsula, but because of the arcuate shape of the Aleutian Ridge relative to the location of the plates' poles of rotation, the angle of convergence lessens to the west (Minster and Jordan, 1978). Along the central Aleutian Ridge, underthrusting is about 30° from normal to the volcanic axis. Motion between plates is approximately parallel along the western Aleutian Ridge. In this paper we briefly describe and interpret the Cenozoic evolution of the Aleutian arc by focusing on the onshore and offshore geologic frameworks in four of its sectors, two sectors each from the Aleutian Ridge and Alaska Peninsula-Kodiak Island segments (Fig. 1). We compare the geologic evolution of the segments and comment on the implications of some new, previously unpublished data.

Alaska↗
USGS2005

Petrologic constraints on the thermal structure of the Cascades arc

Primitive late Cenozoic basaltic lavas from the Cascades volcanic arc near latitude 46°N comprise two distinct compositional groups. Group I includes samples with low Ba/Nb (<20) and other compositional similarities to oceanic island and MORB lavas from within-plate settings. In contrast, Group II exhibits enrichment of Ba and large-ion lithophile elements (LILE) and depletion of Nb and high-field strength elements (HFSE) as seen commonly in calcalkalic lavas from other volcanic arcs. Lavas of both groups are widely distributed across the transect, and Group I lavas are found as much as 30–40 km trenchward of stratovolcanoes that define the High Cascades ‘volcanic front (VF)’. The most primitive lavas are sparsely porphyritic, have elevated Ni, Cr, and Mg#, high calculated magmatic temperatures (1200–1300 °C), and lack evidence of shallow (crustal level) storage and crystallization. Compositions of parental liquids were calculated for each primitive sample on the premise of Fe–Mg equilibrium with mantle peridotite. Assuming that such magmas ascended rapidly from accumulation zones in the mantle, we estimate P and T of segregation. We infer that (a) Group I magmas ascended from systematically greater depths (∼50–70 km) than Group II (∼30–50 km), implying the possible existence of compositional stratification in the mantle wedge; (b) Group I basalts show the least evidence for slab-derived contributions in their sources despite their apparently greater segregation depths (approaching the locus of the Cascadia slab beneath the frontal arc region); (c) Group II lavas with the strongest slab compositional signature have temperatures far exceeding the wet peridotite solidus at high pressure; and (d) the inferred thermal structure of the mantle wedge is very warm, implying a significant component of mantle upwelling and convection. Group I lavas are interpreted as decompression melts from this mantle, and their compositions suggest that their source was little modified by slab-derived contributions. We speculate that melting to produce Group II magmas occurs in the shallow mantle, possibly in response to heating by hot ascending Group I magmas. If true, it seems unlikely that the slab-like signal in Group II lavas can be attributed to modern slab inputs; rather, we postulate that this signature may reflect melting of lithospheric mantle domains containing a ‘stored’ slab-derived component inherited from earlier stages of Cascadia subduction. This scenario differs from the standard paradigm for subduction zones (SZs), and stresses the importance of convecting asthenospheric mantle in driving arc magmatism, particularly in warm subduction zones where slab fluid contributions likely are minimal. In contrast, because tectonic conditions in more typical volcanic arcs favor subduction of cooler, less dehydrated oceanic lithosphere, slab-derived fluids may promote extensive flux-melting in the wedge. Such melts may dominate the magmatic output and mask wedge contributions. The Cascade arc thus provides rarely afforded insights into arc magma genesis.

British Columbia, California, Oregon, Washington↗
USGS2014

Relationship between the Cascadia fore-arc mantle wedge, nonvolcanic tremor, and the downdip limit of seismogenic rupture

Great earthquakes anticipated on the Cascadia subduction fault can potentially rupture beyond the geodetically and thermally inferred locked zone to the depths of episodic tremor and slip (ETS) or to the even deeper fore-arc mantle corner (FMC). To evaluate these extreme rupture limits, we map the FMC from southern Vancouver Island to central Oregon by combining published seismic velocity structures with a model of the Juan de Fuca plate. These data indicate that the FMC is somewhat shallower beneath Vancouver Island (36–38 km) and Oregon (35–40 km) and deeper beneath Washington (41–43 km). The updip edge of tremor follows the same general pattern, overlying a slightly shallower Juan de Fuca plate beneath Vancouver Island and Oregon (∼30 km) and a deeper plate beneath Washington (∼35 km). Similar to the Nankai subduction zone, the best constrained FMC depths correlate with the center of the tremor band suggesting that ETS is controlled by conditions near the FMC rather than directly by temperature or pressure. Unlike Nankai, a gap as wide as 70 km exists between the downdip limit of the inferred locked zone and the FMC. This gap also encompasses a ∼50 km wide gap between the inferred locked zones and the updip limit of tremor. The separation of these features offers a natural laboratory for determining the key controls on downdip rupture limits.

Cascadia fore-arc mantle wedge↗
USGS2017

Rapid exhumation of Cretaceous arc-rocks along the Blue Mountains restraining bend of the Enriquillo-Plantain Garden fault, Jamaica, using thermochronometry from multiple closure systems

The effect of rapid erosion on kinematic partitioning along transpressional plate margins is not well understood, particularly in highly erosive climates. The Blue Mountains restraining bend (BMRB) of eastern Jamaica, bound to the south by the left-lateral Enriquillo-Plantain Garden fault (EPGF), offers an opportunity to test the effects of highly erosive climatic conditions on a 30-km-wide restraining bend system. No previous thermochronometric data exists in Jamaica to describe the spatial or temporal pattern of rock uplift and how oblique (> 20°) plate motion is partitioned into vertical strain. To define the exhumation history, we measured apatite (n = 10) and zircon (n = 6) (U-Th)/He ages, 40Ar/39Ar (n = 2; amphibole and K-spar) ages, and U/Pb zircon (n = 2) crystallization ages. Late Cretaceous U/Pb and 40Ar/39Ar ages (74–68 Ma) indicate rapid cooling following shallow emplacement of plutons during north-south subduction along the Great Caribbean Arc. Early to middle Miocene zircon helium ages (19–14 Ma) along a vertical transect suggest exhumation and island emergence at ~ 0.2 mm/yr. Older zircon ages 10–15 km to the north (44–35 Ma) imply less rock uplift. Apatite helium ages are young (6–1 Ma) across the entire orogen, suggesting rapid exhumation of the BMRB since the late Miocene. These constraints are consistent with previous reports of restraining bend formation and early emergence of eastern Jamaica. An age-elevation relationship from a vertical transect implies an exhumation rate of 0.8 mm/yr, while calculated closure depths and thermal modeling suggests exhumation as rapid as 2 mm/yr. The rapid rock uplift rates in Jamaica are comparable to the most intense transpressive zones worldwide, despite the relatively slow (5–7 mm/yr) strike-slip rate. We hypothesize highly erosive conditions in Jamaica enable a higher fraction of plate motion to be accommodated by vertical deformation. Thus, strike-slip restraining bends may evolve differently depending on erosivity and local climate.

Tectonophysics↗
USGS2025

The Hardscrabble Creek complex: A newly discovered, mostly buried, Mesoproterozoic mafic-ultramafic pluton in the Wet Mountains, Colorado, USA

The origin of prolific ca. 1.4 Ga ferroan magmatism between the southwestern USA and eastern Canada is enigmatic and has been explained by various models, including extensional, mantle plume, and convergent plate-margin models. Rare mafic plutons are associated with the ferroan plutons, which may help constrain their mantle source and tectonic setting. In the southwestern USA, only two such mafic plutons are known to exist. We present the first evidence for a third, mostly buried, potentially layered, mafic-ultramafic Mesoproterozoic pluton, informally referred to as the Hardscrabble Creek complex, in the central Wet Mountains of Colorado, USA. Recent geophysical data show an elliptical magnetic and gravity high spatially coincident with local gabbroic outcrops. New field and petrographic analyses of these exposed rocks reveal that they consist of ultramafic to mafic cumulates, including orthopyroxenite, olivine norite, norite, and anorthosite. High-precision U-Pb dating of zircon from orthopyroxenite and norite yield weighted mean 206 Pb/ 238 U dates of 1352.36 ± 1.60 Ma and 1352.37 ± 1.71 Ma, respectively. These dates indicate that the complex formed over a narrow timeframe, after the adjacent 1362 ± 7 Ma ferroan San Isabel Granite, and during the waning stages of the regional ca. 1.4 Ga ferroan magmatism. Whole-rock geochemistry and Nd-Sr-Pb isotope compositions of samples from the Hardscrabble Creek complex are similar to those of the San Isabel Granite, suggesting that they were derived from the same or a similar mantle source. The mineral chemistry of the samples is comparable to Proterozoic massif-type anorthosites and related mafic intrusions, indicating that the Hardscrabble Creek complex and San Isabel Granite together represent a rare anorthosite-mangerite-charnockite-granite (AMCG) suite in the southwestern USA. The Hardscrabble Creek complex is unique because it formed ~80 m.y. after the other few mafic plutons in the southwestern USA, and it contains an ultramafic section that is absent from these plutons and rare to the AMCG suite in general. A combination of arc-like whole-rock geochemistry, chondrite uniform reservoir-like Nd-Sr-Pb isotopes, and ocean island basalt (OIB)-like zircon trace element chemistry suggests that the complex was derived from a partial melt of OIB-like mantle and interacted with metasomatically enriched lithospheric mantle. The enriched lithospheric mantle signature, combined with the long ~160 m.y. duration of magmatism in the region, is consistent with a period of protracted convergent tectonism.

Colorado↗
USGS1994

The Nd-, Sr- and Pb-isotopic character of lavas from Taal, Laguna de Bay and Arayat volcanoes, southwestern Luzon, Philippines: Implications for arc magma petrogenesis

Following the amalgamation of a collage of pre-Neogene terranes largely by strike-slip and convergence mechanisms to form the Philippine islands, volcanic chains, related to oppositely dipping subduction zones, developed along the eastern and western margins of the archipelago. There is ample field evidence that this volcanic activity, predominantly calc-alkaline in chemical character, had commenced by the Oligocene. Volcanoes resulting from subduction along the Manila-Negros trench in the west (e.g. Taal, Laguna de Bay and Arayat) form a high-angle linear array, trending away from the MORE field on Pb-isotopic covariation diagrams; have the highest Sr- and lowest Nd-isotopic compositions, of the two chains (but nevertheless plotting above bulk earth on the 87 Sr/ 86 Sr versus 143 Nd/ 144 Nd covariation diagram); and exhibit Sm/Nd and Rb/Sr values that are lower and higher, respectively, than the estimated values for bulk earth. While the Sm/Nd and Rb/Sr characteristics are common to both chains, volcanoes associated with the Philippine-East Luzon trench have Pb-isotopic compositions that fall in the Indian Ocean MORB field and that require time-integrated evolution in a high Th/U environment. They also have higher Nd- and lower Sr-isotopic ratios. The source materials of Philippine volcanoes, therefore, have undergone varied recent enrichments in LILE, as indicated by the decoupling of isotopic and elemental ratios. These enrichments, particularly for the western volcanoes, cannot be entirely due to small degrees of partial melting in the mantle wedge, considering that they were accompanied by elevations in radiogenic Pb. Elevated Pb ratios are best explained by the introduction of subducted, continentally derived sediments. The sedimentary component in the western volcanoes is probably the South China Sea sediments derived largely from Eurasia. That this component is not available in the Philippine-East Luzon trench is reflected by the fact that the eastern volcanoes have higher Nd- and lower Sr-isotopic ratios as well as less radiogenic common Pb.

southwestern Luzon↗
USGS1984

Paleogene geology and chronology of southwestern Umnak Island, Aleutian Islands, Alaska

The rocks of southwestern Umnak Island (Nikolski area) consist mainly of a slightly deformed marine sedimentary sequence intruded by hypabyssal quartz diorite sills and small plutons. Laminated and thin-bedded argillaceous and tuffaceous mudstone and siltstone reflect volcanic arc sedimentation from late Eocene to early Oligocene time. Zeolite facies minerals formed during diagenesis include heulandite, analcime, quartz, chlorite, and smectite. Radiometric dates from sill rock and plutons yield apparent ages of about 30 Ma, i.e, middle Oligocene. Chemical data from igneous rocks exhibit calc-alkaline and tholeiitic volcanic arc differentiation trends. Dikes of pyroxene basalt yield K/Ar apparent ages as old at 17 Ma, and a columnar-jointed plug of pyroxene basalt is as young as 1 Ma. The fossil ages and radiometric dates from southwestern Umnak Island are similar to those reported from other central and eastern Aleutian islands, and indicate uniformity in the chronology and tectonic development of the archipelago during the Paleogene. Paleomagnetic data suggest possible northward movement but remain equivocal and more work is indicated.

Alaska↗
USGS2014

Porphyry copper assessment of Central America and the Caribbean Basin

Mineral resource assessments provide a synthesis of available information about distributions of mineral deposits in the Earth&rsquo;s crust. The U.S. Geological Survey prepared a probabilistic mineral resource assessment of undiscovered resources in porphyry copper deposits in Central America and the Caribbean Basin in collaboration with geoscientists from academia and the minerals industry. The purpose of the study was to (1) delineate permissive areas (tracts) for undiscovered porphyry copper deposits within 1 kilometer of the surface at a scale of 1:1,000,000; (2) provide a database of known porphyry copper deposits and significant prospects; (3) estimate numbers of undiscovered deposits within the permissive tracts; and (4) provide probabilistic estimates of amounts of copper, molybdenum, gold, and silver that could be contained in undiscovered deposits. The assessment was done using a three-part mineral resource assessment based on established mineral deposit models. Permissive tracts were delineated based primarily on distributions of mapped igneous rocks related to magmatic arcs that formed in tectonic settings associated with convergent plate margins. Five permissive tracts were delineated: the Early Cretaceous through Eocene Santiago tract, the Late Cretaceous through Oligocene Chortis tract, the Paleocene through Oligocene Dari&eacute;n tract, the Miocene and Pliocene Cocos tract, and the Eocene to Holocene Lesser Antilles tract. These tracts range in size from about 3,000 to about 204,000 square kilometers. Probabilistic estimates of numbers of undiscovered deposits were made for all tracts. To estimate the number of undiscovered porphyry copper deposits, data on known mineral deposits, prospects, and occurrences were considered along with mapped alteration zones, local stream-sediment geochemistry, exploration history, descriptive deposit models, and grade and tonnage models. Most porphyry copper exploration in Central America and the Caribbean Basin has focused on Panama and on the exposed Cretaceous to Eocene central Cordilleran arc that extends from Cuba and Jamaica through Haiti and the Dominican Republic to Puerto Rico and the Virgin Islands. Interest in gold has prompted exploration of historical precious-metal prospects and small mines, some of which may represent high-sulfidation epithermal systems or skarns overlying, or adjacent to, porphyry copper systems. This assessment estimated a total mean of 37 undiscovered porphyry copper deposits within the assessed permissive tracts in Central America and the Caribbean Basin. This represents more than five times the seven known deposits. Predicted mean (arithmetic) resources that could be associated with these undiscovered deposits are about 130 million metric tons of copper and about 5,200 metric tons of gold, as well as byproduct molybdenum and silver. The reported identified resources for the seven known deposits total about 39 million metric tons of copper and about 930 metric tons of gold. The assessment area is estimated to contain nearly four times as much copper and six times as much gold in undiscovered porphyry copper deposits as has been identified to date.

Scientific Investigations Report↗
USGS2003

Early neogene history of the central American arc from Bocas del Toro, western Panama

A newly discovered sequence of lower to middle Miocene rocks from the eastern Bocas del Toro archipelago, western Panama, reveals the timing and environment of the earliest stages in the rise of the Isthmus of Panama in this region. Two new formations, the Punta Alegre Formation (lower Miocene, Aquitanian to Burdigalian) and the Valiente Formation (middle Miocene, Langhian to Serravallian), are here named and formally described. The Punta Alegre Formation contains a diagnostic microfauna of benthic and planktic foraminifera and calcareous nannofossils that indicate deposition in a 2000-m-deep pre-isthmian neotropical ocean from as old as 21.5–18.3 Ma. Its lithology varies from silty mudstone to muddy foraminiferal ooze with rare thin microturbidite layers near the top. The Valiente Formation, which ranges in age from 16.4 to ca. 12.0 Ma, lies with slight angular unconformity on the Punta Alegre Formation and consists of five lithofacies: (1) columnar basalt and flow breccia, (2) pyroclastic deposits, (3) coarse-grained volcaniclastic deposits, (4) coral-reef limestone with diverse large coral colonies, and (5) marine debris-flow deposits and microturbidites. These lithofacies are interpreted to indicate that after ca. 16 Ma a volcanic arc developed in the region of Bocas del Toro and that by ca. 12 Ma an extensively emergent archipelago of volcanic islands had formed. 39 Ar/ 40 Ar dating of basalt flows associated with the fossiliferous sedimentary rocks in the upper part of the Valiente Formation strongly confirms the ages derived from planktic foraminifera and nannofossils. Paleobathymetric analysis of the two new formations in the Valiente Peninsula and Popa Island, in the Bocas del Toro archipelago, shows a general shallowing from lower- through upper-bathyal to upper-neritic and emergent laharic and fluviatile deposits from ca. 19 to 12 Ma. The overlying nonconformable Bocas del Toro Group contains a lower transgressive sequence ranging from basal nearshore sandstone to upper-bathyal mudstone (ca. 8.1–5.3 Ma) and an upper regressive sequence (5.3–3.5 Ma). A similar paleobathymetric pattern is observed from the Gatun to Chagres Formations (12–6 Ma) in the Panama Canal Basin area and in the Uscari, Rio Banana, Quebrada Chocolate, and Moin Formations (8–1.7 Ma) in the southern Limón Basin of Costa Rica.

Geological Society of America Bulletin↗
USGS2023

Volcanic and tectonic sources of seismicity near the Tanaga Volcanic Cluster, Alaska

Tanaga Island in the Central Aleutian Islands includes four stratovolcanoes: Sajaka, Tanaga, and East Tanaga in the northwest, and Takawangha in the central part of the island. Of these volcanoes, only Tanaga has a confirmed record of historical eruptive activity. We use double-difference methods to relocate Tanaga Island earthquakes from the period 2003–2017 to gain insight into volcanic and tectonic activity in the region. High precision relative relocations show subsurface structures in the Tanaga region related to volcanism and crustal tectonics. In 2005, a swarm of ∼600 volcano-tectonic events located below the NW portion of the island culminated with an episode of volcanic tremor. Although there was no known eruption associated with this swarm, we suggest that this activity is associated with fluids beneath Takawangha volcano. Overall, relatively little seismicity appears to be associated with volcanism: of 5,680 earthquakes relocated in this study, only ∼700 took place within 10 km of the volcanoes themselves. Other regions appear to experience primarily, if not exclusively, tectonic seismicity. Two regions on Tanaga Island became seismically active following a M6.6 tectonic earthquake east of the island on 2 May 2008, suggesting the triggering of tectonic earthquakes by the M6.6. Seismic activity recorded offshore and below the southern part of the island is interpreted as due to the clockwise rotation of the Delarof Block in the forearc, and bookshelf faulting along the volcanic arc. This suggests a complex pattern of earthquake hypocenters governed by both volcanic and tectonic processes surrounding Tanaga and Takawangha volcanoes.

Alaska↗