USGS Science⌕ Search

SEARCH · USGS Science

Results for “International Journal of Water”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15Linked to original sources
USGS1999

Formation of natural gas hydrates in marine sediments 1. Conceptual model of gas hydrate growth conditioned by host sediment properties

The stability of submarine gas hydrates is largely dictated by pressure and temperature, gas composition, and pore water salinity. However, the physical properties and surface chemistry of deep marine sediments may also affect the thermodynamic state, growth kinetics, spatial distributions, and growth forms of clathrates. Our conceptual model presumes that gas hydrate behaves in a way analogous to ice in a freezing soil. Hydrate growth is inhibited within fine-grained sediments by a combination of reduced pore water activity in the vicinity of hydrophilic mineral surfaces, and the excess internal energy of small crystals confined in pores. The excess energy can be thought of as a "capillary pressure" in the hydrate crystal, related to the pore size distribution and the state of stress in the sediment framework. The base of gas hydrate stability in a sequence of fine sediments is predicted by our model to occur at a lower temperature (nearer to the seabed) than would be calculated from bulk thermodynamic equilibrium. Capillary effects or a build up of salt in the system can expand the phase boundary between hydrate and free gas into a divariant field extending over a finite depth range dictated by total methane content and pore-size distribution. Hysteresis between the temperatures of crystallization and dissociation of the clathrate is also predicted. Growth forms commonly observed in hydrate samples recovered from marine sediments (nodules, and lenses in muds; cements in sands) can largely be explained by capillary effects, but kinetics of nucleation and growth are also important. The formation of concentrated gas hydrates in a partially closed system with respect to material transport, or where gas can flush through the system, may lead to water depletion in the host sediment. This "freeze-drying" may be detectable through physical changes to the sediment (low water content and overconsolidation) and/or chemical anomalies in the pore waters and metastable presence of free gas within the normal zone of hydrate stability.

Journal of Geophysical Research B: Solid Earth↗
USGS2018

Identifying and eliminating sources of recreational water quality degradation along an urban coast

Restoration of highly degraded urban coastal waters often requires large-scale, complex projects, but in the interim, smaller-scale efforts can provide immediate improvements to water quality conditions for visitor use. We examined short-term efforts to improve recreational water quality near the Grand Calumet River (GC) in the Laurentian Great Lakes. Identified as an Area of Concern (AOC) by the International Joint Commission, the GC has experienced years of industrial and municipal waste discharges, and as a result, coastal beaches have some of the highest rates of beach closings (>70%) in the United States. Project objectives were to identify sources of microbial contamination and to evaluate a short-term management solution to decrease beach closings: during 2015 (partial) and 2016 (season-long), canines were used to deter gull presence. Water samples were analyzed for Escherichia coli in 2015 and 2016, and fecal sources were evaluated using microbial source tracking markers (2015): human ( Bacteroides HF183, Methanobrevibacter nifH ), gull (Gull2), and dog (DogBact). Hydrometeorological conditions were simultaneously measured. Results indicated that human, gull, and canine fecal sources were present, with gulls being the dominant source. Escherichia coli densities were highly correlated with number of gulls present, Gull2 marker, and turbidity. Gull deterrence decreased E. coli and Gull2 marker detection during 2015, but numbers rebounded after program completion. The full-season program in 2016 resulted in lower E. coli densities and fewer beach closings. Large-scale restoration efforts are underway at this location, but short-term, small-scale projects can be useful for reducing beach closings and restoring ecosystem services.

Indiana↗
USGS2001

Plant-uptake of uranium: Hydroponic and soil system studies

Limited information is available on screening and selection of terrestrial plants for uptake and translocation of uranium from soil. This article evaluates the removal of uranium from water and soil by selected plants, comparing plant performance in hydroponic systems with that in two soil systems (a sandy-loam soil and an organic-rich soil). Plants selected for this study were Sunflower ( Helianthus giganteus ), Spring Vetch ( Vicia sativa ), Hairy Vetch ( Vicia villosa ), Juniper ( Juniperus monosperma ), Indian Mustard ( Brassica juncea ), and Bush Bean ( Phaseolus nanus ). Plant performance was evaluated both in terms of the percent uranium extracted from the three systems, as well as the biological absorption coefficient (BAC) that normalized uranium uptake to plant biomass. Study results indicate that uranium extraction efficiency decreased sharply across hydroponic, sandy and organic soil systems, indicating that soil organic matter sequestered uranium, rendering it largely unavailable for plant uptake. These results indicate that site-specific soils must be used to screen plants for uranium extraction capability; plant behavior in hydroponic systems does not correlate well with that in soil systems. One plant species, Juniper, exhibited consistent uranium extraction efficiencies and BACs in both sandy and organic soils, suggesting unique uranium extraction capabilities.

International Journal of Phytoremediation↗
USGS2008

Mineral Commodity Summaries 2008

Each chapter of the 2008 edition of the U.S. Geological Survey (USGS) Mineral Commodity Summaries (MCS) includes information on events, trends, and issues for each mineral commodity as well as discussions and tabular presentations on domestic industry structure, Government programs, tariffs, 5-year salient statistics, and world production and resources. The MCS is the earliest comprehensive source of 2007 mineral production data for the world. More than 90 individual minerals and materials are covered by two-page synopses. National reserves and reserve base information for most mineral commodities found in this report, including those for the United States, are derived from a variety of sources. The ideal source of such information would be comprehensive evaluations that apply the same criteria to deposits in different geographic areas and report the results by country. In the absence of such evaluations, national reserves and reserve base estimates compiled by countries for selected mineral commodities are a primary source of national reserves and reserve base information. Lacking national assessment information by governments, sources such as academic articles, company reports, common business practice, presentations by company representatives, and trade journal articles, or a combination of these, serve as the basis for national reserves and reserve base information reported in the mineral commodity sections of this publication. A national estimate may be assembled from the following: historically reported reserves and reserve base information carried for years without alteration because no new information is available; historically reported reserves and reserve base reduced by the amount of historical production; and company reported reserves. International minerals availability studies conducted by the U.S. Bureau of Mines, before 1996, and estimates of identified resources by an international collaborative effort (the International Strategic Minerals Inventory) are the basis for some reserves and reserve base estimates. The USGS collects information about the quantity and quality of mineral resources but does not directly measure reserves, and companies or governments do not directly report reserves or reserve base to the USGS. Reassessment of reserves and reserve base is a continuing process and the intensity of this process differs for mineral commodities, countries, and time period. Abbreviations and units of measure, and definitions of selected terms used in the report, are in Appendix A and Appendix B, respectively. A resource/reserve classification for minerals, based on USGS Circular 831 (published with the U.S. Bureau of Mines) is Appendix C, and a directory of USGS minerals information country specialists and their responsibilities is Appendix D. The USGS continually strives to improve the value of its publications to users. Constructive comments and suggestions by readers of the MCS 2008 are welcomed.

Mineral Commodity Summaries↗
USGS2009

Mineral Commodity Summaries 2009

Each chapter of the 2009 edition of the U.S. Geological Survey (USGS) Mineral Commodity Summaries (MCS) includes information on events, trends, and issues for each mineral commodity as well as discussions and tabular presentations on domestic industry structure, Government programs, tariffs, 5-year salient statistics, and world production and resources. The MCS is the earliest comprehensive source of 2008 mineral production data for the world. More than 90 individual minerals and materials are covered by two-page synopses. For mineral commodities for which there is a Government stockpile, detailed information concerning the stockpile status is included in the two-page synopsis. Because specific information concerning committed inventory was no longer available from the Defense Logistics Agency, National Defense Stockpile Center, that information, which was included in earlier Mineral Commodity Summaries publications, has been deleted from Mineral Commodity Summaries 2009. National reserves and reserve base information for most mineral commodities found in this report, including those for the United States, are derived from a variety of sources. The ideal source of such information would be comprehensive evaluations that apply the same criteria to deposits in different geographic areas and report the results by country. In the absence of such evaluations, national reserves and reserve base estimates compiled by countries for selected mineral commodities are a primary source of national reserves and reserve base information. Lacking national assessment information by governments, sources such as academic articles, company reports, common business practice, presentations by company representatives, and trade journal articles, or a combination of these, serve as the basis for national reserves and reserve base information reported in the mineral commodity sections of this publication. A national estimate may be assembled from the following: historically reported reserves and reserve base information carried for years without alteration because no new information is available; historically reported reserves and reserve base reduced by the amount of historical production; and company reported reserves. International minerals availability studies conducted by the U.S. Bureau of Mines, before 1996, and estimates of identified resources by an international collaborative effort (the International Strategic Minerals Inventory) are the basis for some reserves and reserve base estimates. The USGS collects information about the quantity and quality of mineral resources but does not directly measure reserves, and companies or governments do not directly report reserves or reserve base to the USGS. Reassessment of reserves and reserve base is a continuing process, and the intensity of this process differs for mineral commodities, countries, and time period. Abbreviations and units of measure, and definitions of selected terms used in the report, are in Appendix A and Appendix B, respectively. A resource/reserve classification for minerals, based on USGS Circular 831 (published with the U.S. Bureau of Mines) is Appendix C, and a directory of USGS minerals information country specialists and their responsibilities is Appendix D. The USGS continually strives to improve the value of its publications to users. Constructive comments and suggestions by readers of the MCS 2009 are welcomed.

Mineral Commodity Summaries↗
USGS2025

Refined mapping of subsurface water ice on Mars to support future missions

Mars has an extensive yet poorly understood cryosphere. Nevertheless, both direct and indirect evidence indicates extensive buried ice across the midlatitudes, including locations where it is presently unstable. While much progress has been made in exploring the processes responsible for ice deposition and preservation during recent climatic fluctuations, a global assessment of the multiple ice reservoirs remains elusive. Motivated by science and the need to find suitable human landing sites, the Mars Subsurface Water Ice Mapping (SWIM) project has developed techniques to map out buried ice. Through integration of all appropriate orbital data sets, the SWIM project produces ∼3 km pixel −1 ice consistency maps over depth ranges of 0–1 m, 1–5 m, and >5 m. In concert with other studies, prior SWIM phases have recognized the uncertainty in our understanding of the geographic and vertical distribution of ice, especially between depths of 1 m and 10 m, creating a push for new ice-prospecting orbital missions, such as the International Mars Ice Mapper mission concept. Here we document the latest SWIM phase, which provides notional targeting maps of the lowest-latitude ice for future missions via a significant improvement in the geomorphic component of our work. The new mapping incorporates both an enhancement in our mapping of geomorphic features and surveys of thermal contraction crack polygons. Our results demonstrate the highly variable nature of the spatial distribution of the shallowest ground ice, with the most equatorward excursions occurring below 30° latitude N/S, locations thought to be out of equilibrium with the current climate.

The Planetary Science Journal↗
USGS2025

Review: The hydrogeology of critical mineral resources relevant to the energy transition

Attaining the goals of the international treaty on climate change (the Paris Agreement) will greatly increase the demand for the critical minerals required to implement clean-energy technologies. This poses both challenges and opportunities to the hydrogeologic community from several perspectives. Here, important insights that the hydrogeological sciences have to offer for mineral exploration, mineral production, and addressing environmental issues related to mining and mine decommissioning are summarized. This study focuses on copper, cobalt, lithium, and rare earths to represent the broad spectrum of critical minerals and illustrate their relevance by referring to projected demands and production rates. The current understanding of the hydrogeologic processes that form major deposits of these minerals are then summarized. Ore is defined as the naturally occurring material from which minerals of economic value can be extracted, where most ore deposits are the products of complex hydrogeologic couplings between fluid flow, heat transport, solute transport, chemical reactions, and mechanical deformation. Exploration models for the discovery of deeper, hidden deposits are potentially informed by hydrogeologic theory and hydrogeochemical processes. Hydrogeologic understanding and methods are also essential to production and recovery. Longstanding challenges are mine dewatering and (conversely) mine water supply, as well as mineral-extraction practices such as spoil heap leaching and in situ mining. New challenges arise from element extraction from subsurface brines. Finally, the quantity of water use and potential environmental impacts of mining on water quality are at the core of ‘social license’: the approval and acceptance of society to mining activities.

Hydrogeology Journal↗
USGS2014

Differential response of carbon fluxes to climate in three peatland ecosystems that vary in the presence and stability of permafrost

Changes in vegetation and soil properties following permafrost degradation and thermokarst development in peatlands may cause changes in net carbon storage. To better understand these dynamics, we established three sites in Alaska that vary in permafrost regime, including a black spruce peat plateau forest with stable permafrost, an internal collapse scar bog formed as a result of thermokarst, and a rich fen without permafrost. Measurements include year-round eddy covariance estimates of carbon dioxide (CO 2 ), water, and energy fluxes, associated environmental variables, and methane (CH 4 ) fluxes at the collapse scar bog. The ecosystems all acted as net sinks of CO 2 in 2011 and 2012, when air temperature and precipitation remained near long-term means. In 2013, under a late snowmelt and late leaf out followed by a hot, dry summer, the permafrost forest and collapse scar bog were sources of CO 2 . In this same year, CO 2 uptake in the fen increased, largely because summer inundation from groundwater inputs suppressed ecosystem respiration. CO 2 exchange in the permafrost forest and collapse scar bog was sensitive to warm air temperatures, with 0.5 g C m −2 lost each day when maximum air temperature was very warm (≥29°C). The bog lost 4981 ± 300 mg CH 4 m −2 between April and September 2013, indicating that this ecosystem acted as a significant source of both CO 2 and CH 4 to the atmosphere in 2013. These results suggest that boreal peatland responses to warming and drying, both of which are expected to occur in a changing climate, will depend on permafrost regime.

Alaska↗
USGS2022

Typology development of earthquake displays in free-choice learning environments, to inform earthquake early warning education in the United States

Free-choice learning environments, such as museums, national parks, interpretive trails, and visitor centers, are trusted sources of information in their communities and support lifelong learning. Earthquake education in these spaces creates awareness of earthquake hazards and risk in areas where people live or visit and, in turn, may increase engagement in preparedness behavior. The ShakeAlert® Earthquake Early Warning System helps publics prepare by warning in advance of shaking from significant earthquakes along the West Coast of the United States. ShakeAlert can minimize earthquake damage by prompting automated actions (e.g., slowing trains, shutting off water valves) and prompting personal protective actions like “Drop, Cover, and Hold On” to significantly reduce damage, injury, and loss of life. Individuals and communities must have a basic understanding of earthquake hazards, as well as an awareness of ShakeAlert technology, to know how to respond if they feel shaking or receive an alert. Currently, there is a lack of contemporary scholarship on how free-choice learning environments approach earthquake education through exhibits and displays. We analyzed a sample of existing earthquake exhibits and their themes in the United States and explored how different display types are uniquely engaging. We found that most displays did not include information about how to prepare for an earthquake or associated protective actions. From this and the development of the typology, our research posits a foundational framework for how best to incorporate place-based learning on earthquakes and early warning into centers of free-choice learning which may apply to a range of other natural hazards and will enhance public awareness and safety.

International Journal of Disaster Risk Reduction↗
USGS1991

Geochemistry of dissolved inorganic carbon in a Coastal Plain aquifer. 2. Modeling carbon sources, sinks, and δ13C evolution

Stable isotope data for dissolved inorganic carbon (DIC), carbonate shell material and cements, and microbial CO 2 were combined with organic and inorganic chemical data from aquifer and confining-bed pore waters to construct geochemical reaction models along a flowpath in the Black Creek aquifer of South Carolina. Carbon-isotope fractionation between DIC and precipitating cements was treated as a Rayleigh distillation process. Organic matter oxidation was coupled to microbial fermentation and sulfate reduction. All reaction models reproduced the observed chemical and isotopic compositions of final waters. However, model 1, in which all sources of carbon and electron-acceptors were assumed to be internal to the aquifer, was invalidated owing to the large ratio of fermentation CO 2 to respiration CO 2 predicted by the model (5–49) compared with measured ratios (two or less). In model 2, this ratio was reduced by assuming that confining beds adjacent to the aquifer act as sources of dissolved organic carbon and sulfate. This assumption was based on measured high concentrations of dissolved organic acids and sulfate in confining-bed pore waters (60–100 μM and 100–380 μM, respectively) relative to aquifer pore waters (from less than 30 μM and 2–80 μM, respectively). Sodium was chosen as the companion ion to organic-acid and sulfate transport from confining beds because it is the predominant cation in confining-bed pore waters. As a result, excessive amounts of Na-for-Ca ion exchange and calcite precipitation (three to four times more cement than observed in the aquifer) were required by model 2 to achieve mass and isotope balance of final water. For this reason, model 2 was invalidated. Agreement between model-predicted and measured amounts of carbonate cement and ratios of fermentation CO 2 to respiration CO 2 were obtained in a reaction model that assumed confining beds act as sources of DIC, as well as organic acids and sulfate. This assumption was supported by measured high concentrations of DIC in confining beds (2.6–2.7 mM). Results from this study show that geochemical models of confined aquifer systems must incorporate the effects of adjacent confining beds to reproduce observed groundwater chemistry accurately.

South Carolina↗
USGS2021

Single-well production history matching and geostatistical modeling as proxy to multi-well reservoir simulation for evaluating dynamic reservoir properties of coal seams

Reservoir properties of coal seams such as gas and water effective permeabilities and gas content, as well as spatial distributions thereof, affect the success of gas production and CO 2 -enhanced gas recovery (EGR) with simultaneous CO 2 sequestration. These properties change during production and injection operations due to variations in reservoir pressure, matrix shrinkage/swelling, and water saturation and are therefore referred to as dynamic properties. Predicting distribution of such important reservoir properties and how they evolve during production, or injection, at unsampled locations can be particularly important for field development and project economics. In this work, dynamic properties of Black Creek coal seam of Black Warrior Basin, Alabama were mapped using pointwise results from single-well production history matching of 45 wells and classical geostatistics . It is explored if this approach can be a proxy, with its limitations, to multi-well reservoir simulation. For this purpose, a reservoir model was built using available reservoir, well and production data to compare its results with those of the geostatistical maps for the same properties. Despite the expected local discrepancies due to differences between the two approaches, the results showed similar patterns and global distributions. Specific results showed that despite long-time operation of the wells in this area, there were still areas with high gas content and low gas effective permeability within the modeled time interval that might have benefited from further development using additional wells.

Alabama↗
USGS1999

An evaluation of six internal anchor tags for tagging juvenile striped bass

Six types of internal anchor tags were compared for retention, legibility, and durability in tagging juvenile (age-0) striped bass Morone saxatilis . Tank-reared striped bass (120–200 mm total length) were tagged with coded wire tags and one of six types of internal anchor tags (500 fish each tag type and two groups of controls). The types of internal anchor tags used were as follows: Floy streamer FM-84 (currently in use by the U. S. Fish and Wildlife Service); Floy streamer with protective sheath (modified FM-84), Floy streamer with a monofilament leader and sheath (FM-89SL), modified Hallprint T687, Hallprint monofilament IEX WAD, and Hallprint T-bar IEX NOR. The Hallprint T-bar IEX NOR and the Floy FM-84 tags caused significantly higher 2-week and 6-month mortality. Final fish total length was different among tag types and tagger groups; however, final fish size was not correlated with either variable after adjusting for initial fish size. Tags were also mounted on polyvinyl chloride pipes and exposed to freshwater, brackish-water, and saltwater environments for 1 year. The brackish-water environment was harsher than either freshwater or salt water and had a greater density of fouling organisms. Legibility was poor for the Floy streamer, and Floy tag sheaths sometimes moved and obscured the printing. Failure rates (printing loss or tag loss) for the Floy tags (36%) were about six times higher than the Hallprint tags (6%). An analysis of 369 anchor tags returned by striped bass fishers indicated that the tag was illegible when more than 43 printed characters were lost and that illegibility increased over time. None of the tags tested was considered appropriate for tagging juvenile striped bass, but changes in tag design, material, and insertion could improve tag retention and survival.

North American Journal of Fisheries Management↗
USGS2003

The role of microbial reductive dechlorination of TCE at a phytoremediation site

In April 1996, a phytoremediation field demonstration site at the Naval Air Station, Fort Worth, Texas, was developed to remediate shallow oxic ground water (<3.7 m deep) contaminated with chlorinated ethenes. Microbial populations were sampled in February and June 1998. The populations under the newly planted cottonwood trees had not yet matured to an anaerobic community that could dechlorinate trichloroethene (TCE) to cis -1,2-dichloroethene (DCE); however, the microbial population under a mature (∼22-year-old) cottonwood tree about 30 m southwest of the plantings had a mature anaerobic population capable of dechlorinating TCE to DCE, and DCE to vinyl chloride (VC). Oxygen-free sediment incubations with contaminated groundwater also demonstrated that resident microorganisms were capable of the dechlorination of TCE to DCE. This suggests that a sufficient amount of organic material is present for microbial dechlorination in aquifer microniches where dissolved O 2 concentrations are low. Phenol, benzoic acid, acetic acid, and a cyclic hydrocarbon, compounds consistent with the degradation of root exudates and complex aromatic compounds, were identified by gas chromatography/mass spectrometry (GC/MS) in sediment samples under the mature cottonwood tree. Elsewhere at the site, transpiration and degradation by the cottonwood trees appears to be responsible for loss of chlorinated ethenes.

Texas↗
USGS2007

Organic petrology of Paleocene Marcelina Formation coals, Paso Diablo mine, western Venezuela: Tectonic controls on coal type

About 7??Mt of high volatile bituminous coal are produced annually from the four coal zones of the Upper Paleocene Marcelina Formation at the Paso Diablo open-pit mine of western Venezuela. As part of an ongoing coal quality study, we have characterized twenty-two coal channel samples from the mine using organic petrology techniques. Samples also were analyzed for proximate-ultimate parameters, forms of sulfur, free swelling index, ash fusion temperatures, and calorific value. Six of the samples represent incremental benches across the 12-13??m thick No. 4 bed, the stratigraphically lowest mined coal, which is also mined at the 10??km distant Mina Norte open-pit. Organic content of the No. 4 bed indicates an upward increase of woody vegetation and/or greater preservation of organic material throughout the life of the original mire(s). An upward increase in telovitrinite and corresponding decrease in detrovitrinite and inertinite illustrate this trend. In contrast, stratigraphically higher coal groups generally exhibit a 'dulling upward' trend. The generally high inertinite content, and low ash yield and sulfur content, suggest that the Paso Diablo coals were deposited in rain-fed raised mires, protected from clastic input and subjected to frequent oxidation and/or moisture stress. However, the two thinnest coal beds (both 0.7??m thick) are each characterized by lower inertinite and higher telovitrinite content relative to the rest of Paso Diablo coal beds, indicative of less well-established raised mire environments prior to drowning. Foreland basin Paleocene coals of western Venezuela, including the Paso Diablo deposit and time-correlative coal deposits of the Ta??chira and Me??rida Andes, are characterized by high inertinite and consistently lower ash and sulfur relative to Eocene and younger coals of the area. We interpret these age-delimited coal quality characteristics to be due to water availability as a function of the tectonic control of subsidence rate. It is postulated that slower subsidence rates dominated during the Paleocene while greater foreland basin subsidence rates during the Eocene-Miocene resulted from the loading of nappe thrust sheets as part of the main construction phases of the Andean orogen. South-southeastward advance and emplacement of the Lara nappes during the oblique transpressive collision of the Caribbean and South American tectonic plates in the Paleocene was further removed from the sites of peat deposition, resulting in slower subsidence rates. Slower subsidence in the Paleocene may have favored the growth of raised mires, generating higher inertinite concentrations through more frequent moisture stress. Consistently low ash yield and sulfur content would be due to the protection from clastic input in raised mires, in addition to the leaching of mineral matter by rainfall and the development of acidic conditions preventing fixation of sulfur. In contrast, peat mires of Eocene-Miocene age encountered rapid subsidence due to the proximity of nappe emplacement, resulting in lower inertinite content, higher and more variable sulfur content, and higher ash yield.

International Journal of Coal Geology↗
USGS2005

Historical shoreline changes along the US Gulf of Mexico: A summary of recent shoreline comparisons and analyses

The US Geological Survey is systematically analyzing historical shoreline changes along open-ocean sandy shores of the United States. This National Assessment of Shoreline Change Project is developing standard repeatable methods for mapping and analyzing shoreline movement so that internally consistent updates can periodically be made to record coastal erosion and land loss along US shores. Recently, shoreline change maps and a report were published for states bordering the Gulf of Mexico. Long-term and short-term average rates of change were calculated by comparing three historical shorelines (1800s, 1930s, 1970s) with an operational mean high water shoreline derived from lidar (light detection and ranging) surveys (post-1998). The rates of change, statistical uncertainties, original shorelines, and complementary geographic information system layers, such as areas of beach nourishment, are available on an Internet Map Server (IMS). For the Gulf of Mexico region, rates of erosion are generally highest in Louisiana along barrier island and headland shores associated with the Mississippi delta. Erosion also is rapid along some barrier islands and headlands in Texas, whereas barrier islands in Mississippi are migrating laterally. Highest rates of erosion in Florida are generally localized around tidal inlets. The most stable Gulf beaches generally are along the west coast of Florida, where low wave energy and frequent beach nourishment minimize erosion. Some long beach segments in Texas have accreted as a result of net longshore drift convergence and around tidal inlets that have been stabilized by long jetties. Individuals and some communities have attempted to mitigate the effects of erosion by emplacement of coastal structures, but those efforts largely have been abandoned in favor of periodic beach nourishment.

Journal of Coastal Research↗
USGS2013

Using occupancy models to investigate the prevalence of ectoparasitic vectors on hosts: an example with fleas on prairie dogs

Ectoparasites are often difficult to detect in the field. We developed a method that can be used with occupancy models to estimate the prevalence of ectoparasites on hosts, and to investigate factors that influence rates of ectoparasite occupancy while accounting for imperfect detection. We describe the approach using a study of fleas (Siphonaptera) on black-tailed prairie dogs ( Cynomys ludovicianus ). During each primary occasion (monthly trapping events), we combed a prairie dog three consecutive times to detect fleas (15 s/combing). We used robust design occupancy modeling to evaluate hypotheses for factors that might correlate with the occurrence of fleas on prairie dogs, and factors that might influence the rate at which prairie dogs are colonized by fleas. Our combing method was highly effective; dislodged fleas fell into a tub of water and could not escape, and there was an estimated 99.3% probability of detecting a flea on an occupied host when using three combings. While overall detection was high, the probability of detection was always <1.00 during each primary combing occasion, highlighting the importance of considering imperfect detection. The combing method (removal of fleas) caused a decline in detection during primary occasions, and we accounted for that decline to avoid inflated estimates of occupancy. Regarding prairie dogs, flea occupancy was heightened in old/natural colonies of prairie dogs, and on hosts that were in poor condition. Occupancy was initially low in plots with high densities of prairie dogs, but, as the study progressed, the rate of flea colonization increased in plots with high densities of prairie dogs in particular. Our methodology can be used to improve studies of ectoparasites, especially when the probability of detection is low. Moreover, the method can be modified to investigate the co-occurrence of ectoparasite species, and community level factors such as species richness and interspecific interactions.

International Journal for Parasitology: Parasites ↗
USGS2002

Carboniferous Psammichnites: Systematic re-evaluation, taphonomy and autecology

The ichnogenus Psammichnites Torell 1870 includes a wide variety of predominantly horizontal, sinuous to looped, backfilled traces, characterized by a distinctive median dorsal structure. Though commonly preserved in full relief on upper bedding surfaces, some ichnospecies of Psammichnites may be preserved in negative hyporelief. Psammichnites records the feeding activities of a subsurface animal using a siphon-like device. Several ichnogenera reflect this general behavioral pattern, including Plagiogmus Roedel 1929 and the Carboniferous ichnogenera Olivellites Fenton and Fenton 1937a and Aulichnites Fenton and Fenton 1937b. Based on analysis of specimens from the United States, Spain, and the United Kingdom, three Carboniferous ichnospecies of Psammichnites are reviewed in this paper: P. plummeri (Fenton and Fenton, 1937a), P. grumula (Romano and Meléndez 1979), and P. implexus (Rindsberg 1994). Psammichnites plummeri is the most common Carboniferous ichnospecies and is characterized by a relatively straight, continuous dorsal ridge/groove, fine transverse ridges, larger size range, and non-looping geometric pattern. It represents a grazing trace of deposit feeders. Psammichnites grumula differs from the other ichnospecies of Psammichnites by having median dorsal holes or protruding mounds. The presence of mounds or holes in P. grumula suggests a siphon that was regularly connected to the sediment-water interface. This ichnospecies is interpreted as produced by a deposit feeder using the siphon for respiration or as a device for a chemosymbiotic strategy. Psammichnites implexus is characterized by its consistently smaller size range, subtle backfill structure, and tendency to scribble. Although displaying similarities with Dictyodora scotica , P. implexus is a very shallow-tier, grazing trace. Changes in behavioral pattern, preservational style, and bedform morphology suggest a complex interplay of ecological and taphonomic controls in Carboniferous tidal-flat Psammichnites . A first distributional pattern consists of guided meandering specimens preserved in ripple troughs, probably reflecting food-searching of buried organic matter concentrated in troughs. A second is recorded by concentration of Psammichnites on ripple crests and slopes. In some cases, the course is almost straight to slightly sinuous and closely follows topographic highs, suggesting a direct control of bedform morphology on trace pattern. Occurrences of Carboniferous Psammichnites most likely represent an opportunistic strategy in marginal-marine settings. Analysis of Carboniferous Psammichnites indicates the presence of a siphon-like device in the producer and reestablishes the possibility of a molluscan tracemaker.

Ichnos: An International Journal for Plant and Ani↗
USGS2008

Detection and attribution of temperature changes in the mountainous Western United States

Large changes in the hydrology of the western United States have been observed since the mid-twentieth century. These include a reduction in the amount of precipitation arriving as snow, a decline in snowpack at low and midelevations, and a shift toward earlier arrival of both snowmelt and the centroid (center of mass) of streamflows. To project future water supply reliability, it is crucial to obtain a better understanding of the underlying cause or causes for these changes. A regional warming is often posited as the cause of these changes without formal testing of different competitive explanations for the warming. In this study, a rigorous detection and attribution analysis is performed to determine the causes of the late winter/early spring changes in hydrologically relevant temperature variables over mountain ranges of the western United States. Natural internal climate variability, as estimated from two long control climate model simulations, is insufficient to explain the rapid increase in daily minimum and maximum temperatures, the sharp decline in frost days, and the rise in degree-days above 0??C (a simple proxy for temperature driven snowmelt). These observed changes are also inconsistent with the model-predicted responses to variability in solar irradiance and volcanic activity. The observations are consistent with climite simulations that include the combined effects of anthropogenic greenhouse gases and aerosols. It is found that, for each temperature variable considered, an anthropogenic signal is identifiable in observational fields. The results are robust to uncertainties in model-estimated fingerprints and natural variability noise, to the choice of statistical down-scaling method, and to various processing options in the detection and attribution method. ?? 2008 American Meteorological Society.

Journal of Climate↗