USGS ScienceSearch

SEARCH · USGS Science

Results for “Geoderma Regional”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

586 records · Page 15Linked to original sources

Heat-flow data from southeastern Oregon

With the exception of values from two holes drilled within 2 km of Mickey Hot Springs, 17 new heat-flow values in southeastern Oregon are within or somewhat below the range one would normally expect in non-anomalous parts of the North American Cordillera. This is not surprising for a region in which most igneous rocks on the surface are 5 m.y. old or more. There is a suggestion of a thermal anomaly associated with the very young (late Pleistocene or Holocene) Diamond Craters lava field, and the thermal regime on both sides of Steens Mountain seems to be controlled, to some degree, by lateral and vertical movement of water.

Oregon

Preliminary bedrock geologic map of the Port Henry quadrangle, Essex County, New York, and Addison County, Vermont

Introduction The bedrock geology of the 7.5-minute Port Henry quadrangle consists of deformed and metamorphosed Mesoproterozoic gneisses of the Adirondack Highlands unconformably overlain by weakly deformed lower Paleozoic sedimentary rocks of the Champlain Valley. The Mesoproterozoic rocks occur on the eastern edge of the Adirondack Highlands and represent an extension of the Grenville Province of Laurentia. Mesoproterozoic paragneiss, marble, and amphibolite hosted the emplacement of an anorthosite-mangerite-charnockite-granite (AMCG) suite, now exposed mostly as orthogneiss, at approximately 1.18–1.15 Ga (giga-annum). In the Port Henry quadrangle, the AMCG metaigneous rocks (Yhg, Ygb, Yanw) intruded older, mostly metasedimentary rocks of the Grenville Complex during the middle to late Shawinigan orogeny (~1,160–1,150 Ma [mega-annum]). All rocks were subsequently metamorphosed to upper amphibolite to granulite facies conditions during the 1,080–1,050 Ma Ottawan orogeny. New mapping reveals four periods of deformation: (1) D1 produced rarely preserved isoclinal folds in the paragneiss and marble and predates AMCG magmatism. (2) Subsequent D2 deformation produced the dominant gneissic fabric preserved in the rock, recumbent folding, and deformed all the Proterozoic units in the map area. Syn- to late-D2 felsic magmatism resulted in the regionally extensive Lyon Mountain Granite Gneiss, which hosts numerous magnetite ore bodies. (3) Mylonitic extensional shear zones and core complex formation marked the beginning of D3 deformation. Protracted D3 deformation resulted in F3 upright folding, dome and basin formation, pegmatite intrusion, reactivation of the S2 foliation, partial melting, metamorphism, metasomatism, iron-ore remobilization, and intrusion of magnetite-bearing pegmatite both as layer-parallel sills and crosscutting dikes. (4) D4 created northeast- and northwest-trending local high-grade ductile shear zones and boudinage, northwest-trending regional kilometer (km)-wide ductile shear zones, and crosscutting granitic pegmatite dikes. The development of the late-stage regional shear zones (D4) was likely due to the continuation of extensional doming and uplift from upper amphibolite facies conditions at the end of the Ottawan orogeny. The majority of iron-ore deposits in the Port Henry and adjacent Witherbee quadrangles are in the hanging wall of these extensional shear zones. In the Port Henry quadrangle, the km-wide Cheney Mountain shear zone is the result of D4 deformation. Kilometer-scale lineaments readily observed in lidar data are Ediacaran mafic dikes and Phanerozoic brittle faults. The Paleozoic rocks are part of the Early Cambrian to Late Ordovician carbonate bank on the ancient margin of Laurentia. The approximately 1-km-thick Cambrian to Ordovician stratigraphy records a transition from synrift clastics to passive-margin peritidal carbonate buildups to gradually deeper-water subtidal- to shelf-carbonates during foreland basin development associated with the Taconic orogeny. The Paleozoic rocks are weakly folded and block faulted. Large areas of the Champlain Valley are covered by undifferentiated glacial deposits, some of which contain mapped landslides. The map also shows waste rock piles and tailings from historical mining operations. This study was undertaken to improve our understanding of the bedrock geology in the Adirondack Highlands, establish a modern framework for 1:24,000-scale bedrock geologic mapping in the Adirondacks, provide a context for historical iron mines in the eastern Adirondacks, and update the stratigraphy of the Champlain Valley in New York and Vermont. This Open-File Report includes a bedrock geologic map; a description of map units; a correlation of map units; and a geographic information system database that includes bedrock geologic units, faults, outcrops, and structural geologic information.

New York, Vermont

Geology and geochemistry of Ni-Co laterite occurrences of northern California and southern Oregon

Ni-Co laterite occurrences in the Klamath Mountains of southern Oregon and northern California contain Ni, Co, and Sc values comparable to global deposits. However, they are thin and limited in extent, often occurring as landslides and slumps. Olivine in the parent material contains Ni and Co and enstatite contains Sc. Through pervasive weathering, these elements where concentrated in Fe- and Mn-oxides. Unlike the mined Nickel Mountian deposit near Riddle, Oregon, these occurrences have no hydrous-Mg silicate minerals. Although the region experienced pervasive weathering in the Eocene, preservation of the laterite profiles was limited in the Klamath Mountains due to accelerated uplift and erosion compared to the Coast Range Provence.

Conference Paper

Forecasting volcanic activity in Germany—A multi-criteria approach

Igneous activity, including shallow intrusions and volcanism, has the potential to disrupt underground critical infrastructure. Notably, future underground infrastructure projects like high-level radioactive waste repositories must be sited in areas of extremely low disruption probability by igneous activity. In Germany, according to the Repository Site Selection Act of 2017 (Standortauswahlgesetz, or StandAG), areas in which Quaternary volcanism is either present or future volcanic activity is expected within the next 1 million years (m.y.) must be excluded from the site selection process. Although the locations of regions with Quaternary volcanism are reasonably well known in Germany, forecasting potential igneous activity at intraplate volcanic fields is challenging, as many processes and their interactions control the spatial distribution of volcanic centers. Here, a semi-quantitative, multi-criteria approach is proposed for a regional evaluation of the relative potential of future igneous activity in Germany. A variety of geoscientific indicators are used, including seismic anomalies in Earth’s mantle, gravity data, tectonic activity, sutures, ground motion, earthquakes, mantle degassing centers, and geochronological data of volcanic rocks. The indicators describe the sequence of processes from potential melt generation in Earth’s mantle, through ascent and accumulation of melt within the lithosphere, to eruption at Earth’s surface. In total, 15 out of 30 proposed geoscientific indicators are selected and quantified using 20 total assigned parameters. Defined threshold values are used to spatially delimit relevant parameter properties to focus on areas with higher potential of future magmatic activity. To consider uncertainties of parameters and their underlying processes, which are usually more spatially extensive below ground, buffer zones are defined in which values of relevance decrease with increasing distance from the initial lateral shape of a parameter. Normalized parameters are combined into an index, whose spatial value distribution is used to differentiate the relative potential of future igneous activity (within the next 1 m.y.). The sensitivity of the results is shown by varying the weighting factors for the relevant parameters in country-wide index maps. Thereby, profiles illustrate the distribution of the resulting index values and respective index fractions of various parameters. Different index maps for the relative potential of future igneous activity are presented and can be used for hazard assessments.

Professional Paper

U.S. Geological Survey Earthquake Hazards Program decadal science strategy, 2024–33

Executive Summary Earthquakes represent one of our Nation’s most significant and costly natural hazards, with estimated annual loses from earthquakes close to $15 billion in 2023. Over the past two centuries, 37 U.S. States have experienced an earthquake exceeding a magnitude of 5, and 50 percent of States have a significant potential for future damaging shaking; these statistics speak to the need for nationwide interest and investment in earthquake hazard characterization and risk reduction. Authorized under the Earthquake Hazards Reduction Authorization Act, the U.S. Geological Survey (USGS) Earthquake Hazards Program (EHP) provides the scientific information, situational awareness, and knowledge necessary to reduce deaths, injuries, and economic losses from earthquakes and earthquake-induced tsunamis, landslides, and soil liquefaction. The EHP supports activities in three focused topical areas: (1) earthquake monitoring, (2) hazard assessment, and (3) applied research, using the results of each—and the coordination among them—to further support risk translation and communication in regions at risk nationwide. For earthquake monitoring, the Advanced National Seismic System (ANSS), a cooperative effort of USGS networks, university partner regional seismic networks, and real-time geodetic networks, collects and analyzes data on earthquakes; issues timely, reliable notifications of their occurrence and impacts; and provides data for earthquake research, hazard, and risk assessment as a foundation for building an earthquake-resilient Nation. The USGS-operated ShakeAlert Earthquake Early Warning system is a recent addition to EHP’s ANSS infrastructure. In the realm of earthquake hazard assessment, the EHP contributes to earthquake risk mitigation strategies by developing the National Seismic Hazard Model and maps, and other related products, that describe the likelihood and potential effects of earthquakes nationwide, especially in the urban areas of highest risk. The EHP also conducts research on the causes, characteristics, and effects of earthquakes and prioritizes work that directly increases the accuracy and precision of earthquake hazards assessments, earthquake forecasts, and earthquake monitoring and situational-awareness products and that supports the Nation’s earthquake mitigation practices. Bridging the EHP’s efforts across research, hazard assessments, and earthquake monitoring is a broad and comprehensive collection of earthquake information products, including the National Seismic Hazard Model, ShakeAlert, and other products describing impact, such as ShakeMap and PAGER (Prompt Assessment of Global Earthquakes for Response), which have been developed and integrated into EHP’s real-time monitoring systems. EHP funds external partners to carry out many important collaborative activities through an active external grants program—one of the largest in the USGS—and through cooperative agreements with other partners such as the university-operated regional seismic networks, funded as part of the ANSS. To continue its support of earthquake hazard characterization and risk reduction, the EHP aims to strengthen its foundational products and practices while positioning itself to respond to the evolving needs of the Nation and follow best practices of the scientific community. This document describes a strategy for the program to ensure it can meet these demands. The foundational priorities outlined in this strategy represent those activities that remain critical to the core functionality of the program and those that can be supported under current fiscal year 2024-level appropriations. Priorities described as aspirational are important for future growth, and to maintain the program’s position as a leading global resource in earthquake science, but would require increases in appropriated funding to be fully realized. Across the program’s portfolio of activities, several major themes have been identified as the most critical activities to advance EHP science over the coming decade. Together, these activities provide the framework necessary to integrate critical hazard characterization and risk reduction activities across the program. They provide the structure for research to advance the understanding of where, when, and why earthquakes occur and how we can use improved knowledge to drive short-term and actionable forecasts of seismic activity. They expand the usefulness of critical earthquake products and advance the sophistication of those products to keep pace with the rapidly evolving needs of an ever-expanding user base while maintaining the position of the USGS as a global leader in earthquake science. Focus on system-level science. Establish an automated earthquake-processing pipeline. Enhance the accuracy and reliability of the ShakeAlert Earthquake Early Warning system and plan for extension to other regions. Implement time-dependent earthquake forecasting. Develop physically realistic models. Expand computational capacity. This science strategy is organized into three primary sections. The first section provides an overview of the EHP and its budget, governance, and program council. Readers familiar with the program may wish to focus on the second section, which describes the core of the science strategy, including priorities across each of the EHP’s major program activities in monitoring, hazard assessment, and targeted research. The third section outlines science priorities that cut across program activities, including those involving collaborations external to the EHP.

American Samoa, Guam, Northern Marianas Islands, U

Ground-motion characterization for the 2025 U.S. National Seismic Hazard Model for Puerto Rico and the U.S. Virgin Islands

We develop the ground-motion characterization (GMC) for the 2025 U.S. National Seismic Hazard Model for Puerto Rico and the U.S. Virgin Islands (NSHM-PRVI) for earthquakes in active crustal, subduction interface, and subduction intraslab regimes. Using ground-motion models (GMMs) from the Next-Generation Attenuation (NGA)-West2 and NGA-Subduction projects, the GMC is parameterized by scaled-backbone models for median ground motions and by independent logic trees of aleatory variability. We introduce several novel GMC features into the U.S. NSHM: (1) use of regional ground-motion data for modeling median ground motions; (2) development of scaled-backbone models for median ground motions; and (3) development of independent logic trees of aleatory variability from variance components of GMMs and computed from multiple ground-motion datasets, and incorporating regional ground-motion data effects on variability. We compute probabilistic seismic hazard curves and maps to evaluate the contributions from the GMC components and for comparison with the 2003 GMC. Contributions of the GMC to epistemic uncertainty in seismic hazard are evaluated through spatial variations in epistemic uncertainty in hazard maps, comparisons between mean hazard curves and fractiles, as well as investigations of the contributions of logic-tree branches to hazard maps and curves. Comparisons between seismic hazard from the 2025 and 2003 GMCs allow examination of the changes in hazard curves and mapped values with 2% and 10% probabilities of exceedance in 50 years. The 2025 GMC exhibits modest changes in median predictions, relative to the 2003 GMC; overall, values of aleatory variability are higher, except at long periods ( ), resulting in changes to probabilistic ground motions at low probabilities of exceedance (<10% probability of exceedance in 50 years). Changes in hazard at 2% and 10% probabilities of exceedance in 50 years are also relatively modest (within 20%) at most sites, with the impacts from the 2025 GMC exhibiting minor reductions and increases at 0.2 and 1.0 s periods, respectively, relative to the 2003 GMC.

Puerto Rico, U.S. Virgin Islands

Exploration for blind geothermal systems in the eastern Great Basin of Utah: An update on the “Lund North” INGENIOUS detailed study site

Existing geothermal production in Utah is commonly collocated with surficial expressions of geothermal heat including active hot springs and hot spring deposits. However, geothermal potential across the Great Basin region is thought to be much higher for hidden or blind geothermal systems. Accordingly, exploration techniques that can locate geothermal resources that lack surface thermal features could support future development of these systems. The goal of the INGENIOUS project is to reduce exploration risk and discover new, economically viable hidden geothermal systems in the Great Basin region. This paper summarizes the efforts and preliminary results of blind geothermal resource prospecting in Utah as part of the larger INGENIOUS project. The Lund North site in the Basin and Range province of southwest Utah was designated as the fourth detailed study site for the project. The site was initially identified from the preliminary Play Fairway Analysis (PFA) geothermal favorability map, which is based on various data elements, and the identification of favorable structural settings across Utah. This site contains existing legacy data including a thermal gradient borehole with a heat-flow value exceeding 220 mW/m 2 . New data collected at this site include terrestrial gravity, magnetotellurics, transient electromagnetics, fluid geochemistry, geologic mapping, UAV-based lidar, paleomagnetism, aeromagnetic surveys, and a shallow temperature survey. Preliminary data and model interpretations corroborate the presence of a large, east-dipping, northeast-southwest-trending normal fault on the edge of a typical Basin and Range graben. Quaternary fault mapping refined by high-resolution lidar surveys suggests a complex step over fault geometry. Utilizing multi-disciplinary datasets for further site assessment at Lund North will facilitate the development of a local-scale PFA and geothermal conceptual model. This new data will be used to site successive thermal gradient drilling to verify heat flow with temperatures at depth at the Lund North site and further investigate the existence of a local geothermal system.

Utah

Bathymetric and acoustic-backscatter mapping of Lake Sammamish, Washington, during USGS field activity 2021-656-FA

In 2021, scientists from the U.S. Geological Survey (USGS) acquired bathymetric and acoustic-backscatter data within Lake Sammamish, Washington. Mapping was completed to find evidence of past earthquakes such as underwater landslides and is part of a larger USGS project to understand the overall geologic hazards history of the Cascadia Margin region. The survey was conducted using the USGS research vessel Parke Snavely outfitted with an interferometric sidescan-sonar system for swath mapping. Three estimates of bathymetric uncertainty were calculated from the post-processed bathymetric data. This report provides a summary of the mapping mission.

Washington

Reconstruction of Holocene and Last Interglacial vegetation dynamics and wildfire activity in Southern Siberia

Wildfires are a rapidly increasing threat to boreal forests. While our understanding of the drivers behind wildfires and their environmental impact is growing, it is mostly limited to the observational period. Here we focus on the boreal forests of southern Siberia and exploit a U–Th-dated stalagmite from Botovskaya Cave, located in the upper Lena region of southern Siberia, to document wildfire activity and vegetation dynamics during parts of two warm periods: the Last Interglacial (LIG; specifically part of the Last Interglacial maximum between 124.1 and 118.8 ka) and the Holocene (10–0 ka). Our record is based on levoglucosan (Lev), a biomarker sensitive to biomass burning, and on lignin oxidation products (LOPs) that discriminate between open and closed forest and hard- or softwood vegetation. In addition, we used carbonate carbon stable isotope ratios ( δ 13 C ), which reflect a dominant control of the host rock, to evaluate soil respiration and local infiltration changes. Our LOP data suggest that, during the Last Interglacial, the region around Botovskaya Cave was characterised by open forest, which by ca. 121.5 ka underwent a transition from fire-resistant hardwood to fire-prone softwood. The Lev record indicates that fire activity was high and increased towards the end of Last Interglacial just before 119 ka. In contrast, the Holocene was characterised by a closed-forest environment with mixed hard- and softwood vegetation. Holocene fire activity varied but at a much lower level than during the Last Interglacial. We attribute the changes in wildfire activity during the intervals of interest to the interplay between vegetation and climate. The open forests of the Last Interglacial were more likely to ignite than their closed Holocene equivalents, and their flammability was aided by warmer and drier summers and a stronger seasonal temperature contrast due to the increase in seasonal insolation difference compared to the Holocene. Our comparison of the last two interglacial intervals suggests that, with increasing global temperatures, the boreal forest of southern Siberia may become progressively more vulnerable to higher wildfire activity.

Botovskaya Cave, Siberia

What do we know without the catalog? Eliciting prior beliefs from experts for aftershock models

Fitting parametric seismological models to earthquake catalogs often comes with numerical challenges, especially when catalogs are small. An alternative way to quantify parameter values for a seismic region is by eliciting expert opinions on the seismological characteristics that each parameter corresponds to. For instance, expert beliefs on aftershock patterns can be formulated into prior distributions for aftershock parameters, for example, for the epidemic‐type aftershock sequence (ETAS) model. We illustrate such a method by not only eliciting priors for ETAS parameters for the Pacific Northwest (PNW), a subduction zone with a complex tectonic environment, but also a relatively small catalog. We compare these priors with those suggested by the ETAS literature for global subduction zones, discussing implications for aftershock forecasting for the PNW.

The Seismic Record

Large springs in the Valley and Ridge Province in Tennessee

Approximately 2,700 miscellaneous discharge measurements for 171 large springs in 28 counties of East Tennessee, predominantly within the Valley and Ridge physiographic province, were analyzed statistically and results tabulated to summarize data useful to the Appalachian Valleys-Piedmont Regional Aquifer System Analysis study. The number of measurements at each spring ranged from 1 to 65. Information from each spring includes station numbers, latitude, longitude, spring name and where data are sufficient, an estimate of the mean discharge and the discharge exceeded by 75%, 50%, and 25% of the miscellaneous measurements. Data are referenced to locations on a 1:1,000 ,000-scale map. The highest mean spring discharge was 32.2 cu ft/sec (14,5000 gallons/min).

Tennessee

Geologic map of MTM −15032 and −20032 quadrangles, western Ladon basin, Mars

Our mapping efforts focused on the geomorphic terrains and geologic units contained within Mars Transverse Mercator (MTM) −15032 and −20032 quadrangles. These two quadrangles are located along the west side of Ladon basin and span lat −12.5° N. to −22.5° N. and long 325° E. to 330° E. The western part of Ladon basin and its bounding basin ring structures to the west preserved features that help to understand the long history of drainage across the Margaritifer Terra region of Mars. Our geologic map provides new insight into the extent of aqueous activity across western Ladon basin and the adjoining highlands, which includes the northern part of Ladon Valles, Arda Valles, numerous small valleys in the western highlands, and light-toned layered deposits associated with these fluvial features. The Mars Odyssey Thermal Emission Imaging System (THEMIS) infrared (IR) daytime mosaic (100 meters per pixel) was used as the primary base map. We constructed the geologic map of western Ladon basin at 1:1,000,000 scale. We identified 20 geologic units in the map area, which we divided into the following groups: crater units; volcanic units; chaotic units; basin fill units; crater, valley, and channel units; and plateau and highlands units. We observed the following sequence of events: (1) formation of Ladon and Holden impact basins in the middle Noachian, producing a mountainous unit; (2) landscape degradation and infilling during the Late Noachian to Late Hesperian forming terra units; (3) formation of Ladon Valles in the Late Noachian to Early Hesperian by catastrophic flooding, producing channel units; (4) accumulation of sediments in the Late Noachian to Early Amazonian, forming basin fill units; (5) formation of a smooth crater fill unit during the Early to Late Hesperian; (6) deposition during the Late Hesperian to Early Amazonian, creating light-toned layered units within Ladon Valles, Ladon basin, and other smaller valley networks along the western uplands, as well as formation of a light-toned unit along some crater floors; (7) formation a of chaotic unit in the Early to Middle Amazonian, formation of alluvial fans in the Early Amazonian, and eruption of a volcanic unit in the Middle Amazonian; and (8) formation of craters throughout the geologic history of the map region.

Scientific Investigations Map

A geospatial analysis of water-quality threats from orphan wells in principal and secondary aquifers of the United States

Throughout the history of oil and gas production in the United States, millions of wells have been drilled for exploration and energy production. Hundreds of thousands of unplugged wells are no longer actively producing and are currently under orphan status, with no responsible party obligated for plugging. Orphan wells can pose threats to water resources by providing pathways for contaminants such as hydrocarbons and brines to migrate into water-supply aquifers. In this study, we investigate the potential threats to groundwater resources posed by orphan wells at the national scale. Water-quality data is extremely sparse in relation to orphan wells nationally and may not be suitable for identifying contamination from oil and gas development. We used geospatial and statistical methods to evaluate which principal and secondary aquifer systems may be most susceptible to contamination from orphan wells. Analysis involved three sets of susceptibility factors including: 1) factors related to the number and density of orphan wells; 2) factors that can threaten well integrity and contribute to transport of contaminants; and 3) factors related to groundwater withdrawal rates and the affected populations/communities in the event of water quality disturbances. From a dataset of 117,672 documented orphan wells, 64,203 fall within a principal aquifer system, while the remainder fall within a secondary aquifer system. By assessing the combination of well integrity and hydrogeologic factors within these aquifer systems, five groupings of principal aquifers were identified, where groups ranged from aquifer systems with high numbers of orphan wells, multiple well integrity threats and high withdrawals, to aquifers with a relatively low number of orphan wells, limited well integrity threats and minimal water use. Three regions of the country emerge containing aquifers with higher susceptibility to contamination from orphan oil and gas wells. These regions include 1) The Appalachian Basin (including the Pennsylvanian Aquifer System), 2) The Gulf Coast Aquifers (including the Coastal Lowlands Aquifer system) and 3) The California Aquifers (including the California Coastal Basin Aquifer system). This work is the first multivariate geospatial investigation of orphan wells and groundwater resources on a national scale, and sheds light on which aquifers are most susceptible to groundwater contamination from orphan wells.

Science of the Total Environment

Analysis of factors affecting plume remediation in a sole-source aquifer system, southeastern Nassau County, New York

Several plumes of dissolved, chlorinated solvents, including trichloroethylene, have been identified in a sole-source aquifer near the former Northrop Grumman Bethpage Facility and Naval Weapons Industrial Reserve Plant sites in southeastern Nassau County, New York. Past investigations have documented that the groundwater contamination originated from this industrial area and now extends to the south, in the direction of groundwater flow. The intermixed plumes are commonly referred to as the “Navy Grumman groundwater plume.” Detailed groundwater-flow modeling was needed for the New York State Department of Environmental Conservation (NYSDEC) to evaluate design options necessary for the construction, operation, optimization, maintenance, and monitoring of a groundwater extraction and treatment cleanup plan selected in a December 2019 Amended Record of Decision by the NYSDEC to comprehensively address these plumes. Consequently, the NYSDEC began a cooperative study with the U.S. Geological Survey in 2020 to better understand the local hydrogeologic framework using two independent approaches to characterize aquifer heterogeneity and update an existing regional groundwater-flow model to provide transient boundary conditions for new inset groundwater-flow models of the plume area. We developed these detailed inset models for the two independent aquifer characterizations using history-matching techniques coupled with a novel approach to risk-based management optimization of the remedial design. We also used the updated regional model to assess this optimized groundwater extraction and treatment design for potential saltwater intrusion. The ensembles of parameters resulting from history matching provided a platform with which to evaluate capture by water-supply and remedial wells using particle-tracking techniques. Using the ensemble to select a risk stance, we performed multiobjective optimization to identify various configurations of remedial pumping that are consistent with external constraints and that favor potentially competing objectives. Multiple solutions provide tradeoffs that NYSDEC can consider. In general, pumping redistribution may help to prevent further contamination migration downgradient. These and other study results are intended to support decisions for the remedial design focused on the local area encompassing the full extent of the Navy Grumman groundwater plume.

New York

Preface to the focus section on earthquake-induced ground deformation

Ground failure due to earthquake-induced liquefaction, surface fault rupture, and landsliding has caused substantial damage in the past and continues to pose risks to critical infrastructure in the future. The consideration of ground failure is central to engineering analysis and design, ranging from site-specific engineering assessments of ground failure potential to broader regional-scale ground failure assessments of near-real-time earthquake impacts or longer-term portfolio risk. Uncertainties in all aspects of the problem complicate the prediction of earthquake-induced ground failure, including the identification of hazard-susceptible geomaterials, characterizing their spatial extent and physical properties, spatio-temporal variability in groundwater conditions, characterization of earthquake ground motions, assessing ground failure severity, and linking ground failure severity to infrastructure damage and loss.

Seismological Research Letters

2023 Earthquake Ground-Motion Workshop for the Central and Eastern United States, with a focus on the Gulf and Atlantic Coastal Plains—Agenda and abstracts

The U.S. Geological Survey held a virtual workshop December 7–8, 2023, to share research and ideas about earthquake ground motions in the Central and Eastern United States, with a focus on the Atlantic and Gulf Coastal Plains. The workshop was organized to learn about potential regionalization of ground-motion characteristics (source, path, and site), consider new explanatory variables for site response, and hear and discuss updates on ground-motion research on the Atlantic and Gulf Coastal Plains. The workshop was organized into a series of contributed presentations and three panel discussions held during 2 days. This report documents the agenda, contributed abstracts, and panel summaries.

Scientific Investigations Report

Using stable oxygen isotope dual-inlet isotope-ratio mass spectrometry to elucidate uranium transport and mixed 230Th/U calcite formation ages at the seminal Devils Hole, Nevada, natural laboratory

Rationale Vein calcite in Devils Hole has been precipitating continuously in oxygen-isotope equilibrium at a constant temperature for over 500 000 years, providing an unmatched δ 18 O paleoclimate time series. A substantial issue is that coeval calcite (based on matching δ 18 O values) has uranium-series ages differing by 12 000 years. Methods An unparalleled high-accuracy δ 18 O chronology series from continuously submerged calcite was used to correct the published uranium-series ages of non-continuously formed calcite in two cores, cyclically exposed by water-table decline during glacial–interglacial transitions. This method relies on the premise that the δ 18 O values of coevally precipitated calcite are identical, allowing matching calcite δ 18 O values to establish formation ages. Results Exposed calcite can have apparent ages that are 12 000 years too young due to unrecognized uranium mobility and resulting mixed ages identified in over 50 mixed uranium-series ages from previous studies. Secondary uranium in fluids, sourced from the formation or dissolution of porous carbonate deposits (folia) with high uranium-238 ( 238 U) concentrations, has migrated up to 10 mm into vein calcite. Conclusions The continuously submerged Devils Hole δ 18 O chronology is not explained by orbital forcing. Rather, this chronology represents a regional climate record in the southern Great Basin of sea-surface-temperature (SST) variations off California, variations that preceded the last and penultimate deglaciations by 5000 to approximately 10 000 years. Temporal discrepancies between the continuously submerged Devils Hole chronology and other regional δ 18 O records (e.g., the Leviathan chronology) can be explained by unrecognized cryptic, pernicious uranium mobility, leading to model estimations that may be thousands of years younger than actual ages. Consequently, paleo-moisture availability, water-table, and groundwater recharge models based on these mixed uranium-series ages are too young by as much as 12 000 years. The potential for post-formation uranium addition in subaerial cores and speleothems underscores the need for caution in uranium-series dating, highlighting δ 18 O time-series comparisons as a method for identifying mixed ages.

Nevada

Cenozoic stratigraphy of Colorado

As a successor to previous Colorado stratigraphy charts (MS-53 Colorado Stratigraphic Chart and MS-54 Cretaceous Stratigraphy of Colorado), this Colorado Geological Survey (CGS) publication resulted from a collaboration between the CGS, USGS, and the Denver Museum of Nature and Science (DMNS). The chart was designed to illustrate Cenozoic stratigraphy spanning the state’s many sedimentary basins. It builds upon the work of dozens of colleagues and updates Richard Pearl’s seminal 1974 stratigraphy chart. The chart leverages the community’s stratigraphic work in both the subsurface and outcrop, and depicts new geochronologic constraints for many units. To facilitate comparison of strata to external forcing factors, the chart employs a linear timescale. Each unit’s dominant depositional environment is depicted, as are major mountain building events, erosional events, and regional unconformities.

Colorado