USGS Science⌕ Search

SEARCH · USGS Science

Results for “The Leading Edge”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14Linked to original sources
USGS2009

Constraining earthquake source inversions with GPS data: 1. Resolution-based removal of artifacts

We present a resolution analysis of an inversion of GPS data from the 2004 M w 6.0 Parkfield earthquake. This earthquake was recorded at thirteen 1-Hz GPS receivers, which provides for a truly coseismic data set that can be used to infer the static slip field. We find that the resolution of our inverted slip model is poor at depth and near the edges of the modeled fault plane that are far from GPS receivers. The spatial heterogeneity of the model resolution in the static field inversion leads to artifacts in poorly resolved areas of the fault plane. These artifacts look qualitatively similar to asperities commonly seen in the final slip models of earthquake source inversions, but in this inversion they are caused by a surplus of free parameters. The location of the artifacts depends on the station geometry and the assumed velocity structure. We demonstrate that a nonuniform gridding of model parameters on the fault can remove these artifacts from the inversion. We generate a nonuniform grid with a grid spacing that matches the local resolution length on the fault and show that it outperforms uniform grids, which either generate spurious structure in poorly resolved regions or lose recoverable information in well-resolved areas of the fault. In a synthetic test, the nonuniform grid correctly averages slip in poorly resolved areas of the fault while recovering small-scale structure near the surface. Finally, we present an inversion of the Parkfield GPS data set on the nonuniform grid and analyze the errors in the final model. Copyright 2009 by the American Geophysical Union.

Journal of Geophysical Research B: Solid Earth↗
USGS1979

Seismic refraction profile, Kingdom of Saudi Arabia: field operations, instrumentation, and initial results

In February 1978 a seismic deep-refraction profile was recorded by the USGS along a 1000-km line across the Arabian Shield in western Saudi Arabia. The line begins in Paleozoic and Mesozoic cover rocks near Riyadh on the Arabian Platform, leads southwesterly across three major Precambrian tectonic provinces, traverses Cenozoic rocks of the coastal plain near Jizan (Tihamat Asir), and terminates at the outer edge of the Farasan Bank in the southern Red Sea. More than 500 surveyed recording sites were occupied, including 19 in the Farasan Islands. Six shot points were used--five on land, with charges placed mostly below water table in drill holes, and one at sea, with charges placed on the sea floor and fired from a ship. The total charge consumed was slightly in excess of 61 metric tons in 21 discrete firings. Seismic energy was recorded by means of a set of 100 newly developed portable seismic stations. Each station consists of a standard 2-Hz vertical geophone coupled to a self-contained analog recording instrument equipped with a magnetic-tape cassette. The stations were deployed in groups of 20 by five observer teams, each generally consisting of two scientist-technicians and a surveyor-guide. On the day prior to deployment, the instruments were calibrated and programmed for automatic operation by means of a specially designed device called a hand-held tester. At each of ten pre-selected recording time windows on a designated firing day, the instruments were programmed to turn on, stabilize, record internal calibration signals, record the seismic signals at three levels of amplification, and then deactivate. After the final window in the firing sequence, all instruments were retrieved and their data tapes removed for processing. A specially designed, field tape- dubbing system was utilized at shot point camps to organize and edit data recorded on the cassette tapes. The main functions of this system are to concatenate all data from each shot on any given day onto a single shot tape, and to provide hard copy for monitoring recorder performance so that any problems can be corrected prior to the next deployment. Composite digital record sections were produced from the dubbed tapes for each shot point by a portable processing and plotting system. The heart of this system is a DEC PDP 11VO3 computer, which controls a cassette playback unit identical to those used in the recorders and dubbers, a set of discriminators, a time-code translator, a digitizer, and a digital plotter. The system was used to maintain various informational data sets and to produce tabulations and listings of various sorts during the field operations, in addition to its main task of producing digital record sections. Two master clocks, both set to time signals broadcast by the British Broadcasting Corporation, provided absolute time for the recording operations. One was located on the ship and the other was stationed at a base camp on the mainland. The land-based master clock was used to set three additional master clocks located at the other active shot points a few days in advance of each firing, and these clocks were then used to set the internal clocks in the portable seismic stations via the hand-held tester. A master clock signal was also linked to the firing system at each shot point for determination of the absolute shot instant. It is possible to construct a generalized crustal model from examination of the six shot point composite record sections obtained in the field. Such a model rests upon a number of simplifying assumptions and will almost certainly be modified at a later stage of interpretation. The main assumptions are that the crust consists of two homogeneous isotropic layers having no velocity inversion,, that the Mohorovicic discontinuity is sharp, and that effects of surface inhomogeneities and elevation changes can be ignored. The main characteristics of the tentative model are the following: (1) The thickness of th

Open-File Report↗
USGS1983

Saudi Arabian seismic deep-refraction profiles; final project report

In February 1978 a seismic deep-refraction profile was recorded by the U.S. Geological Survey along a 1000-km line across the Arabian Shield in western Saudi Arabia. The line begins in Mesozoic cover rocks near Riyadh on the Arabian Platform, leads southwesterly across three major Precambrian tectonic provinces, traverses Cenozoic rocks of the coastal plain near Jizan (Tihamat-Asir), and terminates at the outer edge of the Farasan Bank in the southern Red Sea. More than 500 surveyed recording sites were occupied, including 19 in the Farasan Islands. Six shot points were used: five on land, with most charges placed below the water table in drill holes, and one at sea, with charges placed on the sea floor and detonated from a ship. Slightly more than 61 metric tons of explosives were used in 19 discrete firings. Seismic energy was recorded by 100 newly-developed portable seismic stations deployed in approximately 200 km-long arrays for each firing. Each station consisted of a standard 2-Hz vertical component geophone coupled to a self-contained analog recording instrument equipped with a magnetic-tape cassette. In this final report, we fully document the field and data-processing procedures and present the final seismogram data set as both a digital magnetic tape and as record sections for each shot point. Record sections include a normalized set of seismograms, reduced at 6 km/s, and a true-amplitude set, reduced at 8 km/s, which have been adjusted for amplifier gain, individual shot size, and distance from the shot point. Appendices give recorder station and shot information, digital data set descriptions, computer program listings, arrival times used in the interpretation, and a bibliography of reports published as a result of this project. We used two-dimensional ray-tracing techniques in the data analysis, and our interpretation is based primarily on horizontally layered models. The Arabian Shield is composed, to first-order, of two layers, each about 20 km thick, with average velocities of 6.3 km/s and 7.0 km/s, respectively. At the western shield margin the crust thins to less than 20 km total thickness, beyond which the Red Sea shelf and coastal plain are interpreted to be underlain by oceanic crust. A major crustal lateral velocity inhomogeneity northeast of Sabhah in the Shammar Tectonic Province is interpreted as the suture zone of two crustal blocks of different composition. Several high-velocity anomalies in the upper crust correlate with mapped gneissic dome structures. Two intra-crustal reflectors at13 km depth are interpreted as the tops of mafic intrusives. The Mohorovicic discontinuity beneath the shield varies from 43 km depth in the northeast with 8.2 km/s mantle velocity to 38 km depth in the southwest with 8.0 km/s mantle velocity. Two velocity discontinuities are identified in the upper mantle, at 59 and 70 km depth. We suggest further work, including refined analyses of the data employing filtering and synthetic seismogram techniques, as well as consideration of attenuation properties. Extension of the seismic refraction profile to the Arabian Gulf and some short profiles perpendicular to the existing profile would be fruitful areas for future field work.

Open-File Report↗
USGS2011

Nesting success and resource selection of greater sage grouse in South Dakota: Chapter 8

Declines of Greater Sage-Grouse ( Centrocercus urophasianus ) in South Dakota are a concern because further population declines may lead to isolation from populations in Wyoming and Montana. Furthermore, little information exists about reproductive ecology and resource selection of sage grouse on the eastern edge of their distribution. We investigated Greater Sage-Grouse nesting success and resource selection in South Dakota during 2006-2007. Radiomarked females were tracked to estimate nesting rates, nest success, and habitat resources selected for nesting. Nest initiation was 98.0%, with a maximum likelihood estimate of nest success of 45.6 ± 5.3%. Females selected nest sites that had greater sagebrush canopy cover and visual obstruction of the nest bowl compared to random sites. Nest survival models indicated that taller grass surrounding nests increased nest survival. Tall grass may supplement the low sagebrush cover in this area in providing suitable nest sites for Greater Sage-Grouse. Land managers on the eastern edge of Greater Sage-Grouse range could focus on increasing sagebrush density while maintaining tall grass by developing range management practices that accomplish this goal. To achieve nest survival rates similar to other populations, predictions from our models suggest 26 cm grass height would result in approximately 50% nest survival. Optimal conditions could be accomplished by adjusting livestock grazing systems and stocking rates.

South Dakota↗
USGS2018

Pleistocene glaciation of the Jackson Hole area, Wyoming

Pleistocene glaciations and late Cenozoic offset on the Teton fault have played central roles in shaping the scenic landscapes of the Teton Range and Jackson Hole area in Wyoming. The Teton Range harbored a system of mountain-valley glaciers that produced the striking geomorphic features in these mountains. However, the comparatively much larger southern sector of the Greater Yellowstone glacial system (GYGS) is responsible for creating the more expansive glacial landforms and deposits that dominate Jackson Hole. The glacial history is also inextricably associated with the Yellowstone hotspot, which caused two conditions that have fostered extensive glaciation: (1) uplift and consequent cold temperatures in greater Yellowstone; and (2) the lowland track of the hotspot (eastern Snake River Plain) that funneled moisture to the Yellowstone Plateau and the Yellowstone Crescent of High Terrain (YCHT). The penultimate (Bull Lake) glaciation filled all of Jackson Hole with glacial ice. Granitic boulders on moraines beyond the south end of Jackson Hole have cosmogenic 10Be exposure ages of ~150 thousand years ago (ka) and correlate with Marine Isotope Stage 6. A thick loess mantle subdues the topography of Bull Lake moraines and caps Bull Lake outwash terraces with a reddish buried soil near the base of the loess having a Bk horizon that extends down into the outwash gravel. The Bull Lake glaciation of Jackson Hole extended 48 kilometers (km) farther south than the Pinedale, representing the largest separation of these two glacial positions in the Western United States. The Bull Lake is also more extensive than the Pinedale on the west (22 km) and southwest (23 km) margins of the GYGS but not on the north and east. This pattern is explained by uplift and subsidence on the leading and trailing “bow-wave” of the YCHT, respectively. During the last (Pinedale) glaciation, mountain-valley glaciers of the Teton Range extended to the western edge of Jackson Hole and built bouldery moraines that commonly enclose lakes. On the southern margin of the GYGS, prominent glacial outwash terraces define three phases of the Pinedale glaciation in Jackson Hole: Pinedale-1 (Pd-1) by Antelope Flats with subdued channel patterns on the east side of Jackson Hole; Pinedale-2 (Pd-2) by a large outwash fan that includes Baseline Flat on the west side of Jackson Hole with well-defined channel patterns; and Pinedale-3 (Pd-3) by The Potholes and other outwash fans farther up the Snake River in central Jackson Hole. During Pinedale glaciation, three glacial lobes of the GYGS fed into Jackson Hole, and the relative importance of these lobes changed dramatically through time. During the Pd-1 glaciation, the eastern Buffalo Fork lobe dominated whereas in Pd-2 and Pd-3 time the northern Snake River lobe dominated. This is consistent with migration of the GYGS center of ice mass westward and southward as glaciers built up towards the moisture source provided by storms moving northeastward up the eastern Snake River Plain. The recession of the eastern Buffalo Fork lobe in Pd-2 and Pd-3 times is consistent with an enlarged ice mass on the Yellowstone Plateau that placed the eastern part of the GYGS in a precipitation or snow shadow. In Pd-1 time, the Buffalo Fork lobe reached its maximum extent and was joined by the Pacific Creek lobe. This culmination may correlate with the ~21–18 ka ages of moraines in the Teton Range and nearby ranges. Three subdivisions of Pd-1 glaciation built moraines that are nearly or entirely covered by outwash almost 100 meters thick. In Pd-2 time, the Snake River lobe joined with the Pacific Creek lobe and built a large outwash fan south of the present-day Jackson Lake. Boulders on a moraine at the head of this fan are dated to 15.5 ± 0.5 ka. The relation between Teton glaciers and those of the GYGS is indicated by outwash from these Pd-2 moraines that partly buries outer Jenny Lake moraines dated to 15.2 ± 0.7 ka. East of the large outwash fan, Pd-2 ice advanced across the glacial-age Triangle X-2 lake sediments, perhaps in a surge. The Buffalo Fork lobe retreated more than 20 km up valley from its Pd-1 position and Pd-2 ice of the Snake River and Pacific Creek lobes advanced into the area previously occupied by the Buffalo Fork lobe. The Pd-3 position flanks the margin of Jackson Lake and represents a retreat to a stable position after the Pd-2 7-km advance that may have been a surge across the Triangle X-2 lake sediments. The Potholes and South Landing outwash fans were built in the area deglaciated by the retreat from Pd-2 to Pd-3 time. The Spalding Bay outwash fan continued to incise and a meltwater stream flowed just outside the Teton glacier that filled the present Jenny Lake and deposited the 14.4 ± 0.8 ka inner Jenny Lake moraines. Glacial outwash terraces increase in slope toward their respective moraines of the GYGS and are complex in both north-south and east-west directions. The Pd-1 terrace slopes to the west where it is buried by the Pd-2 outwash. The post-depositional tilting of the Pd-1 outwash terrace is an order of magnitude smaller than the original westward depositional slope. The Pd-1, 2, and 3 terraces have a shingle-like geometry such that the highest terrace decreases in age down valley, and in southern Jackson Hole, the Pd-3 terrace is only 3–5 m above the Snake River. In Pd-1 time the combined Buffalo Fork and Pacific Creek lobes scoured out four basins: (1) Emma Matilda Lake; (2) Two Ocean Lake; (3) a deep basin from lower Pacific Creek to beneath the Oxbows and Jackson Lake Dam; and (4) the largest basin from the lower Buffalo Fork to Deadmans Bar of the Snake River. These basins are largely filled with fine-grained sediment and are now marked by moist lowlands or lakes. In Pd-2 and Pd-3 time the Snake River lobe scoured the present 120-m deep Jackson Lake and possibly the 120-m deeper sediment-filled basin. Subglacial erosion of the Jackson Lake basin by confined water jets is supported by eskers that climb up to the head of the South Landing outwash fan.

Wyoming↗
USGS1969

Metalliferous deposits near Granite Mountain, eastern Seward Peninsula, Alaska

New deposits of lead, zinc, and silver were found in a large altered zone 18 miles long and 2 to 5 miles wide near Quartz Creek west of Granite Mountain in the eastern Seward Peninsula, Alaska. New deposits of molybdenum, bismuth, and silver were found associated with a previously reported occurrence of uranium, copper, lead, and zinc minerals in the upper Peace River drainage northeast of Granite Mountain. Both groups of deposits are associated spatially with felsic plutonic rocks and occur near the western edge of a late Mesozoic province of volcanic plutonic rocks. Both groups of deposits warrant further investigation as possible exploration target areas.

Circular↗
USGS1978

Ore deposits of the Gilman District, Eagle County, Colorado

The Gilman mining district, known also in the past as the Red Cliff district, is in the mountains of southeastern Eagle County, west-central Colorado. The district is the leading source of zinc in Colorado and one of the major base-metal mining districts in the State. As valued at the time of production, total output of zinc, silver, copper, lead, and gold through 1972 was about $328 million. About 90 percent of this total was produced after 1930. The productive part of the district is an area of about 3 square miles (7.8 square kilometers) on the northeast side of the deep canyon of the Eagle River between the small towns of Gilman and Red Cliff. The ore deposits are principally replacement deposits in dolomites of Mississippian and Devonian age and in quartzite of Cambrian age. A few productive veins occur in Precambrian rocks. The replacement deposits crop out in the cliffs of the canyon wall and extend northeastward downdip beneath Battle Mountain, which is composed of a thick sequence of Pennsylvanian clastic rocks. The deposits were originally worked through several separate mines along the canyon wall, but since 1918, all deposits in dolomite rocks, except some small ones near Red Cliff, have been worked through the Eagle mine of the New Jersey Zinc Company at Gilman. The Gilman district lies on the eastern flank of the huge anticline of the Sawatch Range, near the steeply plunging north end of the anticline. Sedimentary rocks on the flank of this part of the anticline dip homoclinally northeastward to a synclinal axis about 8 mi (miles) (13 km (kilometers> northeast of Gilman and then rise more steeply to the Gore fault at the edge of the Gore Range. The homocline is broken by only a few faults most of which have displacements of less than 100 ft (feet) (30 m (meters>. In contrast, the underlying Precambrian rocks are broken by numerous faults and shear zones related to the Homestake shear zone, a northeast-trending master shear zone several miles wide. Fractures and shear zones along the northwest side of the master zone extend beneath the Gilman district. The Gilman district is at the northwestern edge of the northeast-trending Colorado mineral belt as defined by mineralized areas and bodies of intrusive porphyries. Neighboring mining districts in the mineral belt to the southeast of Gilman are the Kokomo lead-zinc district, 13 mi (21 km) distant; the Climax molybdenum district, 16 mi (26 km) distant; and the Leadville district, 20 mi (32 km) distant. These districts, as well as others farther away, are characterized by abundant intrusive rocks of Laramide and middle Tertiary ages and by complex faults systems. The Gilman district, in contrast, contains only a single sill of porphyry and has very simple geologic structure. This probably reflects a position either at the side of or high above a batholith that is inferred from geologic and geophysical data to underlie the mineral belt at shallow depth. The rock column preserved in the district consists, in succession downward, of (1) grit, conglomerate, sandstone, and shale of the Pennsylvanian Minturn Formation, as much as 6,300 ft (1,920 m) thick; (2) shale, limestone, and. sandstone of the Pennsylvanian Belden Formation, 200 ft (61 m) thick; (3) a sill of quartz latite porphyry of the Cretaceous Pando Porphyry about 80 ft (24 m) thick intruded in the basal shale of the Belden Formation; (4) dolomitized limestone of the Mississippian Leadville Dolomite, 110-140 ft (34-43 m) thick; (5) sandstone and sandy and cherty dolomite of the Mississippian or Devonian Gilman Sandstone, 15-50 ft (4.5-15 m) thick; (6) thin-bedded primary or diagenetic dolomite of the Mississippian(?) and Devonian Dyer Dolomite, 50-80 ft (15-24 m) thick; (7) quartzite, conglomerate, and green shale of the Devonian Parting Formation, 35-50 ft (11-15 m) thick; (8) sandstone and shale of the Ordovician Harding Sandstone, 14-80 ft (4.2-24 m) thick; (9) shaly and sandy dolomite and dolom

Professional Paper↗
USGS2002

Geologic and geophysical evidence for the influence of deep crustal structures on Paleozoic tectonics and the alignment of world-class gold deposits, north-central Nevada, USA

Geologic data concur with geophysical and isotopic data that suggest the presence of deep crustal fault zones along the Battle Mountain-Eureka (BME) trend and elsewhere in Nevada. The fault zones may have originated during Proterozoic rifting of the continent and were likely substantially reactivated and modified during Paleozoic tectonism. Five distinct Paleozoic structural and stratigraphic domains are defined that demonstrate the complexity of Paleozoic tectonic events and also lead to hypotheses about ways in which the margin could have been modified. The current locations of these domains adjacent to the geophysically and isotopically defined indicators of the buried continent edge corroborate their interactions with the continental margin. During the Tertiary, preexisting crustal fault zones were intersected and reopened during episodes of extension and served as the conduits for deep-sourced, gold-rich fluids, which were disseminated into Paleozoic slope facies sedimentary rocks, forming sediment-hosted Carlin-type and other deposits. Multiple factors including the locations of these deep-seated structures, the original configuration of the lower Paleozoic continental margin of Nevada, and its subsequent reactivation during the Paleozoic all were fundamental controls on the location of younger mineral deposits. A clearer understanding of the original configuration of the margin and of the effects of subsequent Paleozoic and Mesozoic tectonic events on the margin would provide insight into the locations of these and other prospective mineral belts. ?? 2002 Elsevier Science B.V. All rights reserved.

Ore Geology Reviews↗
USGS2003

Genotype and elevation influence Spartina alterniflora colonization and growth in a created salt marsh

Colonization, growth, and clonal morphology differ with genotype and are influenced by elevation. Local adaptation of Spartina alterniflora to environmental conditions may lead to dominance by different suites of genotypes in different locations within a marsh. In a constructed marsh, we found reduced colonization in terms of density of clones with increasing distance from edge in a 200‐ha mudflat created in 1996; however, growth in diameter was not different among three 100‐m‐long zones that differed in distance from site edge. Distance from edge was confounded by elevation in this comparison of natural colonization. The rate of clonal expansion in diameter was 3.1 m/yr, and clonal growth was linear over the 28 mo of the study. The area dominated by S. alterniflora in the three distance zones increased concomitantly with clonal growth. However, the lower initial clonal densities and colonization by other plant species resulted in reduced overall dominance by S. alterniflora in the two more‐interior locations. Seedling recruitment was an important component of S. alterniflora colonization at all elevations and distances from edge two years after site creation. Seedlings were spatially very patchy and tended to occur near clones that probably produced them. A field experiment revealed that S. alterniflora height and total stem length varied with genotype, while stem density and flowering stem density did not. Differences between edge and center of clonal patches also occurred for some response variables, and there were also significant interactions with genotype. Differences between edge and center are interpreted as differences in clone morphology. Elevation differences over distances of a few meters influenced total stem length and flowering stem density but not other response variables. Clones that were larger in diameter also tended to have greater stem heights and total stem lengths. A number of plant morphological measures were found to vary significantly among the five genotypes and had broad‐sense heritabilities ranging up to 0.71. These results indicate that S. alterniflora populations developing on new substrata colonize broadly, but growth and reproduction vary with genotype and are influenced by changes in elevation (range: 11.8 cm), and probably other environmental factors, over relatively small distances. Differences in growth and clone morphology of different genets, and the frequent occurrence of seedlings throughout the site, underscore the importance of genetic variability in natural and created populations.

Louisiana↗
USGS2001

Spectroscopic evidence for ternary surface complexes in the lead(II)-malonic acid-hematite system

Using extended X-ray absorption fine structure (EXAFS) and attenuated total reflectance Fourier-transform infrared (ATR-FTIR) measurements, we examined the sorption of Pb(II) to hematite in the presence of malonic acid. Pb L III -edge EXAFS measurements performed in the presence of malonate indicate the presence of both Fe and C neighbors, suggesting that a major fraction of surface-bound malonate is bonded to adsorbed Pb(II). In the absence of Pb(II), ATR-FTIR measurements of sorbed malonate suggest the formation of more than one malonate surface complex. The dissimilarity of the IR spectrum of malonate sorbed on hematite to those for aqueous malonate suggest at least one of the sorbed malonate species is directly coordinated to surface Fe atoms in an inner-sphere mode. In the presence of Pb, little change is seen in the IR spectrum for sorbed malonate, indicating that geometry of malonate as it coordinates to sorbed Pb(II) adions is similar to the geometry of malonate as it coordinates to Fe in the hematite surface. Fits of the raw EXAFS spectra collected from pH 4 to pH 8 result in average Pb–C distances of 2.98 to 3.14 Å, suggesting the presence of both four- and six-membered Pb–malonate rings. The IR results are consistent with this interpretation. Thus, our results suggest that malonate binds to sorbed Pb(II) adions, forming ternary metal-bridging surface complexes.

Journal of Colloid and Interface Science↗
USGS2000

A study of porewater in water saturated sediments of levee banks and marshes in the lower Coeur d'Alene River valley, Idaho: Sampling, analytical methods, and results

This report contains information about the composition of interstitial porewater and solids from water saturated, metal contaminated levee banks at the river's edge and marshes in the lower Coeur d'Alene River valley. Data include pH, alkalinity, and concentrations of sulfate and metals (arsenic [As], cadmium [Cd], copper [Cu], iron [Fe], mercury [Hg], manganese [Mn], lead [Pb], antimony [Sb], and zinc [Zn]) in porewater and sulfur (S), carbon (C), and metal contents of associated solids. The results indicate that the pH of the porewater in all of the sediments is less than the pH of the Coeur d'Alene River. Dissolved concentrations of Mn and Fe are elevated in all of the porewater and levels of sulfate in porewater are below detection limits in almost all marsh sediments and in levee banks at the 2 sites furthest downstream. These observations suggest that levee bank and marsh sediments are suboxic or anoxic below the surface. Concentrations of dissolved Cd are greater in the Coeur d'Alene River than in porewater, while concentrations of As are greater in the porewater relative to the Coeur d'Alene River. Some concentrations of Cu, Pb, Sb, and Zn in porewater are lower, while others are higher, than dissolved concentrations in the Coeur d'Alene River. In addition, leaching experiments (i.e., Standard Elutriate Tests [SET]) were done in the laboratory to evaluate potential water quality impacts resulting from the addition of oxygen and water to these sediments. The intent of the experiments was to simulate how metal concentrations in water may be affected during dredging of contaminated sediments in the lower Coeur d'Alene River valley. The results indicate that there are releases of protons, sulfate, As, Mn, Pb, Sb, and Zn from the majority of levee bank and marsh sediments during leaching by Coeur d'Alene River water. At a water to sediment ratio of 4 to 1, most values of pH and dissolved concentrations of Cd, Fe, Pb, and Zn in the leaching solutions exceed the freshwater aquatic life standards for water of a hardness of 100 mg CaCOa/L. This work was funded by the U.S. EPA and was done to support their Remedial Investigation/Feasibility Study of the Coeur d'Alene and Spokane River basins.

Idaho↗
USGS2008

Stress changes from the 2008 Wenchuan earthquake and increased hazard in the Sichuan basin

On 12 May 2008, the devastating magnitude 7.9 (Wenchuan) earthquake struck the eastern edge of the Tibetan plateau, collapsing buildings and killing thousands in major cities aligned along the western Sichuan basin in China. After such a large-magnitude earthquake, rearrangement of stresses in the crust commonly leads to subsequent damaging earthquakes. The mainshock of the 12 May earthquake ruptured with as much as 9 m of slip along the boundary between the Longmen Shan and Sichuan basin, and demonstrated the complex strike-slip and thrust motion that characterizes the region. The Sichuan basin and surroundings are also crossed by other active strike-slip and thrust faults. Here we present calculations of the coseismic stress changes that resulted from the 12 May event using models of those faults, and show that many indicate significant stress increases. Rapid mapping of such stress changes can help to locate fault sections with relatively higher odds of producing large aftershocks. ??2008 Macmillan Publishers Limited. All rights reserved.

Nature↗
USGS2016

Cyanobacterial harmful algal blooms and U.S. Geological Survey science capabilities

Cyanobacterial harmful algal blooms (CyanoHABs) are increasingly a global concern because CyanoHABs pose a threat to human and aquatic ecosystem health and cause economic damages. Despite advances in scientific understanding of cyanobacteria and associated compounds, many unanswered questions remain about occurrence, environmental triggers for toxicity, and the ability to predict the timing, duration, and toxicity of CyanoHABs. U.S. Geological Survey (USGS) scientists are leading a diverse range of studies to address CyanoHAB issues in water bodies throughout the United States, using a combination of traditional methods and emerging technologies, and in collaboration with numerous partners. By providing practical applications of cutting edge CyanoHAB research, USGS studies have advanced scientific understanding, enabling the development of approaches to help protect ecological and human health.

Open-File Report↗
USGS1995

Geologic map of the Littlefield Quadrangle, northern Mohave County, Arizona

The Littlefield 7.5' quadrangle lies in the extreme northwestern corner of Mohave County, Arizona (fig. 1). Elevations range from about 536.5 m (1,760 ft) at the Virgin River (south-central edge of quadrangle) to 975 m (3,200 ft) in the Beaver Dam Mountains (northeastern corner of quadrangle). Interstate Arizona Highway 15 and U.S. Highway 91 provides a general access to the quadrangle while several unimproved dirt roads lead to remote areas of the quadrangle. The community of Littlefield, Arizona is just southeast of Interstate 15 along the west bank of the Virgin River, and the community of Beaver Dam, Arizona is just northwest of Interstate 15 in the valley of Beaver Dam Wash (fig. 1). Population of both communities is about 300 people. The environment, topography, and geography is typical of the Mohave Desert of Nevada and California. There are about 9 sections of private land in the quadrangle and 5 sections belonging to the state of Arizona. The balance is public land administrated by the U.S. Bureau of Land Management, Arizona Strip District in St. George, Utah. The area supports sparse growth of desert shrubs, mainly creosote bush and cactus. Dense growths of tamerisk (Salt Cedar), cottonwood, and willow trees thrive along the alluvial terraces and banks of the Virgin River. A variety of water loving plants thrive in warm spring waters on the east side of the Virgin River near the Interstate 15 bridge, and in Beaver Dam Wash, northwest corner of the quadrangle.

Arizona↗
USGS1975

An occurrence of disseminated uraninite in Wheeler Basin, Grand County, Colorado

Disseminated uraninite occurs in Wheeler Basin, Grand County, Colo., about 5 mi (8 km) southeast of Monarch Lake, in Precambrian metamorphic rocks consisting of migmatized gneiss and mixed gneiss and pegmatite. An intrusion of Precambrian Y Silver Plume Granite lies within 400 ft (122 m) of the occurrence. The disseminated uraninite is confined to parts of the host rock that are rich in biotite; highest grade found was 0.73 percent uranium. The disseminated uraninite occurs as cubes and grains, generally from 0.1 to 0.3 mm across. Unit cell edge of the uraninite, ≈ 5.48 A, suggests its pegmatitic origin. The origin of the uraninite disseminations is attributed by us to remobilization and concentration of elements during metamorphism caused by the intrusion of Silver Plume Granite. Uranium and lead isotopic analyses by K. R. Ludwig of uraninite and monazite from biotite concentrations confirm an apparent age of 1,450±20 m.y. for these minerals. This age is equivalent to that reported for the Silver Plume Granite. Although the Wheeler Basin occurrence is small in size, it has many similarities to the Rossing uranium deposit in South-West Africa.

Colorado↗
USGS2013

Understanding processes controlling sediment transports at the mouth of a highly energetic inlet system (San Francisco Bay, CA)

San Francisco Bay is one of the largest estuaries along the U.S. West Coast and is linked to the Pacific Ocean through the Golden Gate, a 100 m deep bedrock inlet. A coupled wave, flow and sediment transport model is used to quantify the sediment linkages between San Francisco Bay, the Golden Gate, and the adjacent open coast. Flow and sediment transport processes are investigated using an ensemble average of 24 climatologically derived wave cases and a 24.8 h representative tidal cycle. The model simulations show that within the inlet, flow and sediment transport is tidally dominated and driven by asymmetry of the ebb and flood tides. Peak ebb velocities exceed the peak flood velocities in the narrow Golden Gate channel as a result of flow convergence and acceleration. Persistent flow and sediment gyres at the headland tips are formed that limit sediment transfer from the ebb-tidal delta to the inlet and into the bay. The residual transport pattern in the inlet is dominated by a lateral segregation with a large ebb-dominant sediment transport (and flow) prevailing along the deeper north side of the Golden Gate channel, and smaller flood dominant transports along the shallow southern margin. The seaward edge of the ebb-tidal delta largely corresponds to the seaward extent of strong tidal flows. On the ebb-tidal delta, both waves and tidal forcing govern flow and sediment transport. Wave focusing by the ebb-tidal delta leads to strong patterns of sediment convergence and divergence along the adjacent Ocean Beach.

California↗
USGS2003

Gravity and magnetic expression of the San Leandro gabbro with implications for the geometry and evolution of the Hayward Fault zone, northern California

The Hayward Fault, one of the most hazardous faults in northern California, trends north-northwest and extends for about 90 km along the eastern San Francisco Bay region. At numerous locations along its length, distinct and elongate gravity and magnetic anomalies correlate with mapped mafic and ultramafic rocks. The most prominent of these anomalies reflects the 16-km-long San Leandro gabbroic block. Inversion of magnetic and gravity data constrained with physical property measurements is used to define the subsurface extent of the San Leandro gabbro body and to speculate on its origin and relationship to the Hayward Fault Zone. Modeling indicates that the San Leandro gabbro body is about 3 km wide, dips about 75??-80?? northeast, and extends to a depth of at least 6 km. One of the most striking results of the modeling, which was performed independently of seismicity data, is that accurately relocated seismicity is concentrated along the western edge or stratigraphically lower bounding surface of the San Leandro gabbro. The western boundary of the San Leandro gabbro block is the base of an incomplete ophiolite sequence and represented at one time, a low-angle roof thrust related to the tectonic wedging of the Franciscan Complex. After repeated episodes of extension and attenuation, the roof thrust of this tectonic wedge was rotated to near vertical, and in places, the strike-slip Hayward Fault probably reactivated or preferentially followed this pre-existing feature. Because earthquakes concentrate near the edge of the San Leandro gabbro but tend to avoid its interior, we qualitatively explore mechanical models to explain how this massive igneous block may influence the distribution of stress. The microseismicity cluster along the western flank of the San Leandro gabbro leads us to suggest that this stressed volume may be the site of future moderate to large earthquakes. Improved understanding of the three-dimensional geometry and physical properties along the Hayward Fault will provide additional constraints on seismic hazard probability, earthquake modeling, and fault interactions that are applicable to other major strike-slip faults around the world.

California↗
USGS2000

Evolution of the Creede Caldera and its relation to mineralization in the Creede mining district, Colorado

At 25 Ma a major epithermal silver and base metal deposit formed in rhyolitic welded tuff near Creede, Colorado. Nearly 24000 metric tons of silver, appreciable lead, and small amounts of zinc, copper, and gold, have been produced from large, crustified veins under Bachelor and Bulldog Mountains north and northwest of Creede. Prior geologic, hydrologic, and stable-isotope studies showed that ore deposition was associated with the mixing and boiling of waters from diverse sources and suggester that a critical part of the ore-forming fluid may have originated within the ancient lake and sediments of the lacustrine Creede Formation that filled the Creede caldera. Two drill holes that sampled the heretofore hidden lower half of the Creede Formation are the focus of this book. The Creede caldera formed at 26.9 Ma within a high constructional plateau of silicic ashflows that covered and were sporadically interlayed with, intermediate lavas and lahars from large stratovolcanoes. The Creede caldera lake had an inflow evaporation balance that did not permit rapid filling to create a brim-full deep lake. Thus salts were evaporatively concentrated; but, with the exception of possible gypsum, no evaporite minerals preserved. Cool springs deposited travertine as mounds and contributed to limestone interlaminations within the sediment. The lake bottom was anoxic, and bacterial reduction of sulfate led to extreme sulfur isotopic fractionation in diagenetic pyrite. The caldera gradually resurged, converting the initial equant lake into an arcuate moat. Resurgent doming, alluvial fans, lacustrine sediments, ashfalls, and lava domes displaced water, lifted the lake so that it overlapped what later became the southern edge of the mineralized are, and eventually filled the basin. At 25.1 Ma an unseen pluton intruded beneath the northen part of the Creede district and created a convecting olume that drew in brine from the Creede caldera fill, meteotic water from highlands to the north, and possibly a fluid carrying radiogenic lead. These waters mixed and boiled as they approached the surface and moved southward, deposited a zoned epithermal deposit a few hundred meters below the paleosurface, and finally discharged into the top of the Creede Formation. The sulfide in the ores was the igneous derivation, but the sulfate was a mixture of biogenic sulfur from the Creede Formation, oxidized igneous sulfide, and thermochemically reduced and partially oxygen exchanged sulfate. The studies of the Creede caldera provide key observational and conceptual elements for the generalized model of the Creede ore deposit. The relation of the Creed ore deposit to a brine reservoir has broad significance because other brine accumulations (as in the Great Basin, the Green River Basin, or the playas of the Altiplano offer similar setting and exploration opportunities.

Colorado↗