USGS Science⌕ Search

SEARCH · USGS Science

Results for “Preliminary Interpretive Reports”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14Linked to original sources

Preliminary description and interpretation of cores and radiographs from Clear Lake, Lake County, California: Core 3

Clear Lake, California is located in the California Coast Ranges about 120 km north of San Francisco and is the largest freshwater lake wholly within California. The lake basin is tectonically controlled (Anderson, 1936; Brice, 1953; Sims and Rymer, 1974) and the area seismically active (Coffman and von Hake, 1973). Interest in this lake was stimulated by hypotheses developed from a study of sediments in Van Norman Reservoir after the 1971 San Fernando earthquake (Sims, 1973). During this study three zones of deformational structures were found in the 1 m-thick sequence of sediments exposed over about 2 km2 of the reservoir bottom. These zones were correlated with moderate earthquakes that shook the San Fernando area in 1930, 1952, and 1971. Results of this study, coupled with the experimental formation of deformational structures similar to those from Van Norman Reservoir, led to a search for similar structures in Pleistocene and Holocene lakes and lake sediments in other seismically active areas. Clear Lake, California was chosen specifically because of its location near the San Andreas fault and the San Francisco-Oakland urban complex, and the probability of obtaining an uninterrupted sediment record from the present into Pleistocene time. Eight 12 to 15 cm diameter continuous cores were taken from the lake sediments (fig. 1) as part of a study of earthquake induced structures in sediments and the tectonic framework of the Clear Lake basin. The eight cores range in length from 13.87 m to 115.21 m (Table 1).

California↗

Preliminary description and interpretation of cores and radiographs from Clear Lake, Lake County, California: Core 7

Clear Lake, California is located in the California Coast Ranges about 120 km north of San Francisco and is the largest freshwater lake wholly within California. The lake basin is tectonically controlled (Anderson, 1936; Brice, 1953, Sims and Rymer, 1974) and the area seismically active (Coffman and von Hake, 1973). Interest in this lake was stimulated by hypotheses developed from a study of sediments in Van Norman Reservoir after the 1971 San Fernando earthquake (Sims, 1973). During this study three zones of deformational structures were found in the 1 m-thick sequence of sediments exposed over about 2 km 2 of the reservoir bottom. These zones were correlated with moderate earthquakes that shook the San Fernando area in 1930, 1952, and 1971. Results of this study, coupled with the experimental formation of deformational structures similar to those from Van Norman Reservoir, led to a search for similar structures in Pleistocene and Holocene lakes and lake sediments in other seismically active areas. Clear Lake, California was chosen specifically because of .:s location near the San Andreas fault and the San Francisco-Oakland urban complex, and the probability of obtaining an uninterrupted sediment record from the present into Pleistocene time. Eight 12 to 15 cm diameter continuous cores were taken from the lake sediments (fig. 1) as part of a study of earthquake induced structures in sediments and the tectonic framework of the Clear Lake basin. The eight cores range in length from 13.87 m to 133.09 m (Table 1).

California↗

A statistical summary and listing of the spectrographic analyses of heavy mineral concentrate and conventional, sieved stream-sediment samples, Silver City area, New Mexico

Geochemical sampling of a tier of eight 7 1/2-minute quadrangles bordered by latitudes 32° 45'and 33° 00' N. and longitudes 108° 00' and 108° 30' W. was begun in the fall of 1974 and continued seasonally until completion in the fall of 1976. These quadrangles are in southwest New Mexico and include the well-known mineral deposits of the Silver City area. The sampling was designed to gain semidetailed information on the metal-anomaly characteristics of the strongly mineralized area surrounding Silver City, New Mexico, and to seek geochemical clues for the continuation of these mineral deposits beneath overlying Tertiary volcanic rocks to the north. The data obtained within areas of known mineral deposits provide information on the metallogenic processes and metal suites that both relate and distinguish metal systems. Evaluation of this information relative to the regional geologic framework and the distribution of known mineral deposits will result in the identification of additional target areas for exploration, as well as further our understanding of the geochemical characteristics of mineralized areas. Extrapolation of models developed from the study of areas of known, exposed mineralization to areas covered by Tertiary volcanic rocks, such as the northern part of this tier of quadrangles, is a promising procedure for continuing research into geochemical-anomaly characteristics of covered mineral deposits. Preliminary interpretation of the data indicates that the southern part of the area in which Paleozoic-Mesozoic rocks and mineral deposits are exposed, should be reassessed to the classification and genesis of some of the deposits and to the types of mineral commodities that may be present. Some wholly new exploration targets within these areas are also indicated by some of the data. In addition, geochemical clues to buried mineral deposits, possibly representing continuation northward of some features of the Silver City mining district, have been observed in data from the northern, Tertiary volcanic areas. The meanings of these clues are still speculative. For this study, 917 stream-sediment and 921 stream-sediment concentrate samples were collected. The stream-sediment-concentrate samples, which consist of heavy minerals, were split into magnetic and nonmagnetic fractions, each of which was analyzed. This resulted in the analysis of 1,842 heavy-mineral and 917 sieved stream-sediment samples. Analytical results for all of the sample types are summarized statistically on table 1 and tabulated in their entirety on table 2.

New Mexico↗

Water-quality assessment of the South Platte River basin, Colorado, Nebraska, and Wyoming: Analysis of available nutrient, suspended-sediment, and pesticide data, water years 1980-92

Nutrient, suspended-sediment, and pesticide data from surface- and ground-water sites in the South Platte River Basin for water years 1980-92 were compiled, screened, and interpreted. This activity is part of the U.S. Geological Survey's National Water Quality Assessment (NAWQA) program. The analysis of existing water-quality data provides a perspective on recent water-quality conditions in the South Platte River Basin, evaluations of the strengths and weaknesses of available data, and implications for water-quality issues and future study priorities and design. Most data analyzed were collected by the U.S. Geological Survey. Additionally, data from three local agencies were used in the analysis. A total of 3,484 samples from 54 surface-water sites and 107 wells were used in the analysis. The areal distribution of nutrient samples collected from surface-water and ground-water sites were sufficient in number and areal distribution to describe current water- quality conditions throughout the basin, but data were not sufficient to analyze factors and processes affecting water quality. However, suspended- sediment and pesticide data were sparse in their distribution with respect to time, space, and flow regime, and were sufficient only to provide a preliminary description of conditions in the basin.

Colorado, Nebraska, Wyoming↗

Preliminary assessment of in-situ geomechanical characteristics in drill hole USW G-1, Yucca Mountain, Nevada

Observations made during drilling and subsequent testing of the USW G-1 drill hole, Yucca Mountain, Nevada, provide qualitative insights into the in- situ geomechanical characteristics of the layered tuff units penetrated by the hole. Substantial drilling-fluid losses, and the occurrence of drilling-induced fracturing, are understandable in terms of the low, minimum horizontal stress magnitudes interpreted from six hydraulic-fracturing stress measurements conducted between hole depths of 640 and 1,300 meters. Although not confirmed directly by the hydraulic-fracturing data, other observations suggest that the minimum stress magnitudes in the more densely welded and brittle tuff layers may be even smaller than in the less welded and more ductile rocks. Stress-induced borehole ellipticity observed along most of the length of USW G-1 indicates that the horizontal stress components are not equal, and that the concentration of these stresses around the hole is sufficient to locally exceed the yield strength of the rock. The low, minimum horizontal stress magnitudes, perhaps variable with lithology, and the indications from borehole ellipticity of a high in-situ stress/strength ratio, indicate the need for further studies to characterize the structural and geomechanical properties of the rocks at depth in Yucca Mountain.

Open-File Report↗

Gravity and seismic exploration in Yucca Valley, Nevada test site, January-April, 1959

The thickness of the alluvial and tuffaceous deposits that overlie bedrock in Yucca Valley has been inferred from gravity and seismic measurements. Preliminary interpretations indicate that these deposits are thickest in a narrow north-trending trough in the eastern part of the valley. The gravity data delineate a buried north-trending ridge of bedrock that extends from Mine Mountain almost to Quartzite Ridge. Seismic refraction measurements confirm the existence of the bedrock ridge and indicate that the bedrock is as close as 100 feet to the surface. The buried bedrock high is important because it may alter concepts of the movement of groundwater within the valley. A single seismic-refraction profile was located near the area of thickest alluvium and tuff to determine the feasibility of using refraction techniques for determining the depth to bedrock where it is covered with several thousand feet of alluvium and tuff. The results are encouraging but not enough data were acquired to give a reliable depth estimate. Seismic-refraction measurements were used successfully to determine the thickness of alluvium in narrow valleys partly filled with alluvium. This work was in the northwestern part of Yucca Valley and was done to choose drilling sites for studies of ground-water movement.

Nevada↗

Description and preliminary interpretation of core CL-80-1, Clear Lake, Lake County, California

Coring operations were conducted in the west basin of Clear Lake during July and August 1980 to produce a regional Quaternary reference section. A 177-m-long core (CL-80-1) was taken, which also augments and extends a previous study of eight shorter cores collected from Clear Lake in 1973. Core CL-80-1 was continuously cored in 7.5 m of water, and 66.5 percent recovery was achieved. The sediments are composed primarily of clayey and silty sapropelic mud similar to those presently being deposited in the lake, and are interbedded with local coarse sand and gravel deposits and thin volcanic ash beds. Coring was terminated when coarse rounded gravel and cobbles of Franciscan assemblage lithology were encountered. The location of core CL-80-1 is between two other core sites of the 1973 series of cores, one of which (CL-73-4) is 115 m long and contains a well-defined, uninterrupted pollen and physical stratigraphic record from the present to about 130,000 years ago. Paleomagnetic and preliminary pollen analyses of core CL-80-1 are complete and comparison of these results with those of core CL-73-4 suggest that the new core represents a record from the present to about 175,000 years ago.

California↗

Source water identification and chemical typing for nitrogen at the Kissimmee River, Pool C, Florida — Preliminary assessment

As part of the South Florida Water Management District's Ground Water-Surface Water Interactions Study, a project was undertaken to identify the ages and sources of water in the area of Pool C, Kissimmee River, Florida. Twenty-two water samples were collected along two transects: at a remnant river oxbows (Site D) and in the dredged part of the channel (Site C). The samples were analyzed for concentrations of fluoride and strontium, and for isotopes of oxygen, hydrogen, and nitrogen. Selected samples were analyzed for one or more additional isotopes (carbon-14, the ratio of strontium-87 to strontium-86, tritium, and tritium-helium-3). Delta nitrogen-15 values for nitrate at Site C can be explained by soil nitrogen and fertilizer sources; at Site D soil nitrogen accounts for most values, although animal wastes may explain higher values. Some of the isotopic data seem to be contradictory: carbon-14 data apparently indicate that shallow ground water is younger at Site D than at Site C, whereas strontium-87/86 ratios lead to the opposite conclusion. More detailed analysis of major ions and nutrients for all sampling points, along with flow measurements, could allow more definitive interpretation of isotope data and provide additional insight into mixing of ground water and surface water at the sites.

Florida↗

Hawaiian Volcano Observatory summary 100; Part 1, seismic data, January to December 2000

The Hawaiian Volcano Observatory (HVO) summary presents seismic data gathered during the year and a chronological narrative describing the volcanic events. The seismic summary is offered without interpretation as a source of preliminary data. It is complete in the sense that all data for events of M≥1.5 routinely gathered by the Observatory are included. The emphasis in collection of tilt and deformation data has shifted from quarterly measurements at a few water-tube tilt stations (“wet” tilt) to a larger number of continuously recording borehole tiltmeters, repeated measurements at numerous spirit-level tilt stations (“dry” tilt), and surveying of level and trilateration networks. Because of the large quantity of deformation data now gathered and differing schedules of data reduction, the seismic and deformation summaries are published separately. The HVO summaries have been published in various forms since 1956. Summaries prior to 1974 were issued quarterly, but cost, convenience of preparation and distribution, and the large quantities of data dictated an annual publication beginning with Summary 74 for the year 1974. Summary 86 (the introduction of CUSP at HVO) includes a description of the seismic instrumentation, calibration, and processing used in recent years. The present summary includes enough background information on the seismic network and processing to allow use of the data and to provide an understanding of how they were gathered.

Hawai'i↗

Preliminary Aeromagnetic Map of Joshua Tree National Park and Vicinity, Southern California

This aeromagnetic map of Joshua Tree National Park and vicinity is intended to promote further understanding of the geology and structure in the region by serving as a basis for geophysical interpretations and by supporting geological mapping, water-resource investigations, and various topical studies. Local spatial variations in the Earth's magnetic field (evident as anomalies on aeromagnetic maps) reflect the distribution of magnetic minerals, primarily magnetite, in the underlying rocks. In many cases the volume content of magnetic minerals can be related to rock type, and abrupt spatial changes in the amount of magnetic minerals commonly mark lithologic or structural boundaries. Bodies of mafic and ultramafic rocks tend to produce the most intense magnetic anomalies, but such generalizations must be applied with caution because rocks with more felsic compositions, or even some sedimentary units, also can cause measurable magnetic anomalies. The database includes two ASCII files containing new aeromagnetic data and two ASCII files with point locations of the local maximum horizontal gradient derived from the aeromagnetic data. This metadata file describes the horizontal gradient locations derived from new and existing aeromagnetic data. This aeromagnetic map identifies magnetic features as a basis for geophysical interpretations; the gradients help define the edges of magnetic sources. This database updates geophysical information originally presented in smaller-scale formats and includes detailed aeromagnetic data collected by EON Geosciences, Inc.

Open-File Report↗

Mineralogy and diagenesis of low-permeability sandstones of Late Cretaceous age, Piceance Creek Basin, northwestern Colorado

This report presents preliminary results of a mineralogic and diagenetic study of some low-permeability sandstones from measured surface sections and cores obtained from drill holes in the Piceance Creek Basin of northwestern Colorado. A documentation of the mineralogy and diagenetic history will aid in the exploration for natural gas and in the development of recovery technology in these low-permability sandstones. These sandstones are in the nonmarine upper part of the Mesaverde Formation (or Group) of Late Cretaceous age and are separated from overlying lower Tertiary rocks by a major regional unconformity. Attention is focused on the sandstone units of the Ohio Creek Member, which directly underlies the unconformity; however, comparisons between the mineralogy of the Ohio Creek strata and that of the underlying sandstone units are made whenever possible. The Ohio Creek is a member of the Hunter Canyon Formation (Mesaverde Group) in the southwestern part of the basin, and the Mesaverde Formation in the southern and central parts of the basin. The detrital mineralogy is fairly constant throughout all of these nonrnarine Cretaceous sandstone units; however, in the southeastern part of the basin, there is an increase in percentage of feldspar, quartzite, and igneous rock fragments in sandstones of the Ohio Creek Member directly underlying the unconformity. In the southwestern part of the basin, sandstones of the Ohio Creek Member are very weathered and are almost-entirely comprised of quartz, chert, and kaolinite. A complex diagenetic history, partly related to the overlying unconformity, appears to be responsible for transforming these sandstones into potential gas reservoirs. The general diagenetic sequence for the entire Upper Cretaceous interval studied is interpreted to be (early to late): early(?) calcite cement, chlorite, quartz overgrowths, calcite cement, secondary porosity, analcime (surface only), kaolinite and illite, and late carbonate cements. Authigenic high-iron chlorite, which occurs on grain rims and in pore throats, is primarily responsible for the low-permeability of the subsurface sandstones of the Ohio Creek Member in the center of the basin. Kaolinite is the most abundant pore-filling authigenic clay in these sandstones, from the southwestern part of the basin and is responsible for their distinctive white-weathering color in outcrop. In the sandstones below the Ohio Creek Member, however, chlorite and kaolinite occur locally, and authigenic calcite and illite are more abundant. The occurrence and distribution of secondary porosity is one of the most important aspects of the diagenetic history of these sandstones. It is present as moldic intra- and intergranular porosity, as well as microporosity among authigenic clay pariicles. Although present locally in most sandstone units, secondary porosity is particularly common in the uppermost sandstone units and is interpreted to have formed primarily asa result ofweathering during the time represented by the Cretaceous-Tertiary unconformity.

Colorado↗

Hawaiian Volcano Observatory summary 101: Part 1, seismic data, January to December 2001

The Hawaiian Volcano Observatory (HVO) summary presents seismic data gathered during the year and a chronological narrative describing the volcanic events. The seismic summary is offered without interpretation as a source of preliminary data. It is complete in the sense that all data for events of M>1.5 routinely gathered by the Observatory are included. The emphasis in collection of tilt and deformation data has shifted from quarterly measurements at a few water-tube tilt stations ("wet" tilt) to a larger number of continuously recording borehole tiltmeters, repeated measurements at numerous spirit-level tilt stations ("dry" tilt), and surveying of level and trilateration networks. Because of the large quantity of deformation data now gathered and differing schedules of data reduction, the seismic and deformation summaries are published separately. The HVO summaries have been published in various forms since 1956. Summaries prior to 1974 were issued quarterly, but cost, convenience of preparation and distribution, and the large quantities of data dictated an annual publication beginning with Summary 74 for the year 1974. Summary 86 (the introduction of CUSP at HVO) includes a description of the seismic instrumentation, calibration, and processing used in recent years. The present summary includes enough background information on the seismic network and processing to allow use of the data and to provide an understanding of how they were gathered.

Hawai'i↗

A ground-based magnetic survey of Frenchman Flat, Nevada National Security Site and Nevada Test and Training Range, Nevada: data release and preliminary interpretation

The Nevada National Security Site (NNSS, formerly the Nevada Test Site) is located in southern Nevada approximately 105 kilometers (km) (65 miles) northwest of Las Vegas. Frenchman Flat is a sedimentary basin located on the eastern edge of NNSS and extending eastward into the adjacent Nevada Test and Training Range (NTTR). In late September 2010, the U.S. Geological Survey (USGS) conducted a ground-based magnetic survey of the northeast portion of Frenchman Flat within the NNSS and within the adjacent NTTR. The survey was designed to address two questions of importance to the siting of new monitoring wells near (down-gradient of) or within groundwater-contaminant plumes resulting from the Milk Shake and Pin Stripe underground nuclear tests: Question 1—What is the horizontal extent of the basalt flow (the Basalt lava flow aquifer or BLFA) encountered in three wells (UE5k, UE5i, and ER-5-3) within the alluvial section at depths ranging from 268 to 290 meters (m) (880 to 950 feet [ft]), and having a thickness between 9 and 21 m (30 and 70 ft)? Exploratory Hole UE5k is located near Emplacement Hole U5k, site of the Milk Shake underground nuclear test (U.S. Department of Energy, 2000). Characterization well ER-5-3 is located approximately 670 m (2,200 ft) west-northwest of the Milk Shake test. Question 2—Does basin and range normal faulting observed in the hills north of Frenchman Flat continue southward under alluvium and possibly disrupt the Topopah Spring Tuff of the Paintbrush Group (the Topopah Spring welded tuff aquifer or TSA) east of the Pin Stripe underground nuclear test, which was conducted in Emplacement hole U11b?

Nevada↗

Basement domain map of the conterminous United States and Alaska

The basement-domain map is a compilation of basement domains in the conterminous United States and Alaska designed to be used at 1:5,000,000-scale, particularly as a base layer for national-scale mineral resource assessments. Seventy-seven basement domains are represented as eighty-three polygons on the map. The domains are based on interpretations of basement composition, origin, and architecture and developed from a variety of sources. Analysis of previously published basement, lithotectonic, and terrane maps as well as models of planetary development were used to formulate the concept of basement and the methodology of defining domains that spanned the ages of Archean to present but formed through different processes. The preliminary compilations for the study areas utilized these maps, national-scale gravity and aeromagnetic data, published and limited new age and isotopic data, limited new field investigations, and conventional geologic maps. Citation of the relevant source data for compilations and the source and types of original interpretation, as derived from different types of data, are provided in supporting descriptive text and tables. The tectonic settings for crustal types represented in the basement domains are subdivided into constituent geologic environments and the types of primary metals endowments and deposits in them are documented. The compositions, architecture, and original metals endowments are potentially important to assessments of primary mineral deposits and to the residence and recycling of metals in the crust of the United States portion of the North American continent. The databases can be configured to demonstrate the construction of the United States through time, to identify specific types of crust, or to identify domains potentially containing metal endowments of specific genetic types or endowed with specific metals. The databases can also be configured to illustrate other purposes chosen by users.

Data Series↗

Hawaiian volcano observatory summary 103; Part I, seismic data, January to December 2003

The Hawaiian Volcano Observatory (HVO) summary presents seismic data gathered during the year and a chronological narrative describing the volcanic events. The seismic summary is offered without interpretation as a source of preliminary data. It is complete in the sense that most data for events of M= 1.5 routinely gathered by the Observatory are included. The emphasis in collection of tilt and deformation data has shifted from quarterly measurements at a few water-tube tilt stations ('wet' tilt) to a larger number of continuously recording borehole tiltmeters, repeated measurements at numerous spirit-level tilt stations ('dry' tilt), and surveying of level and trilateration networks. Because of the large quantity of deformation data now gathered and differing schedules of data reduction, the seismic and deformation summaries are published separately. The HVO summaries have been published in various forms since 1956. Summaries prior to 1974 were issued quarterly, but cost, convenience of preparation and distribution, and the large quantities of data dictated an annual publication beginning with Summary 74 for the year 1974. Summary 86 (the introduction of CUSP at HVO) includes a description of the seismic instrumentation, calibration, and processing used in recent years. The present summary includes background information on the seismic network and processing to allow use of the data and to provide an understanding of how they were gathered.

Open-File Report↗

Effects of two contrasting agricultural land uses on shallow groundwater quality in the San Joaquin Valley, California; design and preliminary interpretation

From 1992 through 1994, the San Joaquin-Tulare Basins Study team of the USGS National Water Quality Assessment program investigated the occurrence and distribution of water quality constituents in shallow groundwater underlying two areas of different agricultural land uses: almond orchards and vineyards. The study was restricted to the alluvial fans of the eastern San Joaquin Valley, the area of most groundwater use in the valley. A geographic information system (GIS) was used to delineate the distribution of the two target land uses, to evaluate ancillary data, and to select candidate wells that fit prescribed criteria. Twenty domestic water supply wells were sampled in each of the two areas. In addition, pairs of observation wells were installed and sampled at five of the sites in each area to evaluate whether the water quality in the domestic wells reflects that of the shallow groundwater underlying the target land use. A preliminary evaluation of the results shows that nitrate concentrations in the shallow groundwater are significantly higher in the almond orchard areas than in the vineyard area (p=0.005). In contrast, concentrations of 1,2-dibromo-3-chloropropane (DBCP) were higher in the vineyard area than in the almond orchard area (p=0.032). The most frequently detected pesticides in groundwater underlying both areas were simazine, atrazine, and desethylatrazine (an atrazine degradation product). These observations are explained, in part, by differences in chemical application and hydrogeologic factors.

California↗

Dissolved oxygen analysis, TMDL model comparison, and particulate matter shunting—Preliminary results from three model scenarios for the Klamath River upstream of Keno Dam, Oregon

Efforts are underway to identify actions that would improve water quality in the Link River to Keno Dam reach of the Upper Klamath River in south-central Oregon. To provide further insight into water-quality improvement options, three scenarios were developed, run, and analyzed using previously calibrated CE-QUAL-W2 hydrodynamic and water-quality models. Additional scenarios are under development as part of this ongoing study. Most of these scenarios evaluate changes relative to a "current conditions" model, but in some cases a "natural conditions" model was used that simulated the reach without the effect of point and nonpoint sources and set Upper Klamath Lake at its Total Maximum Daily Load (TMDL) targets. These scenarios were simulated using a model developed by the U.S. Geological Survey (USGS) and Watercourse Engineering, Inc. for the years 2006–09, referred to here as the "USGS model." Another model of the reach was developed by Tetra Tech, Inc. for years 2000 and 2002 to support the Klamath River TMDL process; that model is referred to here as the "TMDL model." The three scenarios described in this report included (1) an analysis of whether this reach of the Upper Klamath River would be in compliance with dissolved oxygen standards if sources met TMDL allocations, (2) an application of more recent datasets to the TMDL model with comparison to results from the USGS model, and (3) an examination of the effect on dissolved oxygen in the Klamath River if particulate material were stopped from entering Klamath Project diversion canals. Updates and modifications to the USGS model are in progress, so in the future these scenarios will be reanalyzed with the updated model and the interim results presented here will be superseded. Significant findings from this phase of the investigation include: * The TMDL analysis used depth-averaged dissolved oxygen concentrations from model output for comparison with dissolved oxygen standards. The Oregon dissolved oxygen standards do not specify whether the numeric criteria are based on depth-averaged dissolved oxygen concentration; this was an interpretation of the standards rule by the Oregon Department of Environmental Quality (ODEQ). In this study, both depth-averaged and volume-averaged dissolved oxygen concentrations were calculated from model output. Results showed that modeled depth-averaged concentrations typically were lower than volume-averaged dissolved oxygen concentrations because depth-averaging gives a higher weight to small volume areas near the channel bottom that often have lower dissolved oxygen concentrations. Results from model scenarios in this study are reported using volume-averaged dissolved oxygen concentrations. * Under all scenarios analyzed, violations of the dissolved oxygen standard occurred most often in summer. Of the three dissolved oxygen criteria that must be met, the 30-day standard was violated most frequently. Under the base case (current conditions), fewer violations occurred in the upstream part of the reach. More violations occurred in the down-stream direction, due in part to oxygen demand from the decay of algae and organic matter from Link River and other inflows. * A condition in which Upper Klamath Lake and its Link River outflow achieved Upper Klamath Lake TMDL water-quality targets was most effective in reducing the number of violations of the dissolved oxygen standard in the Link River to Keno Dam reach of the Klamath River. The condition in which point and nonpoint sources within the Link River to Keno Dam reach met Klamath River TMDL allocations had no effect on dissolved oxygen compliance in some locations and a small effect in others under current conditions. On the other hand, meeting TMDL allocations for nonpoint and point sources was predicted to be important in meeting dissolved oxygen criteria when Upper Klamath Lake and Link River also met Upper Klamath TMDL water-quality targets. * The location of greatest dissolved oxygen improvement from nutrient and organic matter reductions was downstream from point and nonpoint source inflows because time and distance are required for decay to occur and for oxygen demand to be exerted. * After assessing compliance with dissolved oxygen standards at all 102 model segments in the Link River to Keno Dam reach, it was determined that the seven locations used by ODEQ appear to be a representative subset of the reach for dissolved oxygen analysis. * The USGS and TMDL models were qualitatively compared by running both models for the 2006–09 period but preserving the essential characteristics of each, such as organic matter partitioning, bathymetric representation, and parameter rates. The analysis revealed that some constituents were not greatly affected by the differing algorithms, rates, and assumptions in the two models. Conversely, other constituents, especially organic matter, were simulated differently by the two models. Organic matter in this river system is best represented by a mixture of relatively labile particulate material and a substantial concentration of refractory dissolved material. In addition, the use of a first-order sediment oxygen demand, as in the USGS model, helps to capture the seasonal and dynamic effect of settled organic and algal material. * Simulation of shunting (diverting) particulate material away from the intake of four Klamath Project diversion canals, so that the material stayed in the river and out of the Project area, caused higher concentrations of particulate material to occur in the river. In all cases modeled, the increase in in-river particulate material also produced decreased dissolved oxygen concentrations and an increase in the number of days when dissolved oxygen standards were violated. * If particulate material were shunted back into the river at the Klamath Project diversion canals, less organic matter and nutrients would be taken into the Klamath Project area and the Lost River basin, resulting in return flows to the Klamath River via Lost River Diversion Channel that may have reduced nutrient concentrations. Model scenarios bracketing potential end-member nutrient concentrations showed that the composition of the return flows had little to no effect on dissolved oxygen compliance under simulated conditions.

Oregon↗

A summary of petroleum potential, environmental geology, and the technology, time frame, and infrastructure for exploration and development of the western Gulf of Alaska

This summary of the regional geology, petroleum potential, geologic hazards and time frame for exploration of the western Gulf of Alaska has been written to aid the Bureau of Land Management in preparing the Draft Environmental Impact Statement. A preliminary version was written in Sept., 1975.(von Huene and others, 1975) in support of the Call for Nominations, Proposed OCS Oil and Gas Lease Sale #46. Since that time, there has been a substantial increase in information as the result of a two-month examination of recent studies of the adjacent Gulf of Alaska Tertiary Province and a preliminary interpretation of some publicly available common depth point (CDP) seismic reflection data recently acquired by the U.S. Geological Survey. The main source of geologic and geophysical data used in the preparation of this summary is published and unpublished information of the U.S. Geological Survey (Plafker and others, 1975,Bruns and Plafker, 1975; Carlson, Bruns and Molnia, 1975; Carlson and Molnia, 1975; Core, Mattick, and Bayer, 1975; Molnia and Carlson, 1975 a & b; von Huene and others, 1975). Prior to 1975, data were gathered mainly for purposes other than for assessment of oil and gas resources and of the environmental consequences of exploration and development. A systematic survey for such an assessment is planned for the summer of 1976 and, therefore, this summary is tentative. Although the major problems and regional setting are discussed in this paper, a great deal more specific data and interpretations will begin to become available in about one year. In this summary we consider the geology of a broad region on the continental shelf off the Kodiak group of islands and the Kenai Peninsula. We will concentrate on the area proposed for leasing in Sale #46. The area lies between about 56°N latitude and 60°N latitude (Fig. 1), and it measures approximately 660 km x 100 km. Water depths are generally less than 200 m.

Alaska↗