USGS Science⌕ Search

SEARCH · USGS Science

Results for “Journal of Earthquake Engineering (JEE)”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

1,705 records · Page 14Linked to original sources
USGS2025

Reaction kinetics and accelerant effects of sulfides in early mature hydrocarbon generation using hydrous pyrolysis

Hydrocarbon generation in organic-rich sediments is influenced by the molecular organic composition and relative abundance of associated minerals. Certain mineral-derived elements act as catalysts and reaction intermediaries, facilitating early-stage hydrocarbon formation in potential source rocks. This study investigated the role of sulfur contributed from pyrite as an accelerant in thermal reaction, focusing on its effects on early maturation and consequent hydrocarbon generation from gilsonite (low-sulfur solid petroleum). Hydrous pyrolysis (HP) experiments were conducted on mixtures of gilsonite and pyrite in varying ratios (1:0.1, 1:0.5, 1:1, 1:2, and 1:10 w/w gilsonite:pyrite) at 320, 350, and 370 °C for 72 h. Untreated and thermally altered residues were analyzed using solid bitumen reflectance (BR o , %), total organic carbon (TOC) content, programmed temperature pyrolysis, scanning electron microscopy with energy-dispersive spectroscopy (SEM-EDS), and X-ray diffraction (XRD) to evaluate the potential accelerant role of pyritic sulfur in hydrocarbon formation. The results show HP residues at 320 and 350 °C with greater pyrite concentrations had higher BR o , while reflectance values were similar in the 370 °C residues, regardless of pyrite concentration, suggesting enhanced reaction at lower thermal conditions. Increasing pyrite content systematically decreased hydrogen index (HI) values while increasing the transformation ratio (TR) and production index (PI), indicating enhanced conversion of organic matter to hydrocarbons with increasing pyrite concentrations. Gas yields increased with pyrite addition, particularly at 350 °C, confirming secondary cracking effects. However, gas production stabilized or declined at higher pyrite loadings (1:10), suggesting alternative reaction pathways such as coke formation. Our data indicate the presence of pyrite lowers the activation energy for thermal cracking, shifting peak experimental hydrocarbon generation temperatures downward by 20–30 °C, with the most pronounced accelerant effects observed at moderate pyrite concentrations (1:0.5 and 1:1). The thermodynamic framework reveals that pyrite stability is influenced by experimental conditions, with pyrrhotite formation favored in the presence of gilsonite due to reduced oxygen fugacity. Pyrite transformation to pyrrhotite, as observed through XRD, SEM-EDS, and predicted by thermodynamic data, further supports the accelerant role of S, as pyrrhotite exhibits a higher hydrogen transfer potential, promoting early oil generation. These findings highlight the importance of pyrite in modulating hydrocarbon generation pathways in organic-rich systems.

Journal of Analytical and Applied Pyrolysis↗
USGS2025

Widespread occurrence of former anhydrite phenocrysts in Laramide-age magmas related to porphyry-skarn Cu mineralization at Santa Rita and Hanover-Fierro, New Mexico, USA

Reports of magmatic anhydrite are relatively rare, with only ~30 occurrences documented worldwide so far. However, magmatic anhydrite saturation is difficult to recognize because anhydrite decomposes rapidly in near-surface environments. In most cases, only anhydrite inclusions shielded within other phenocryst phases were able to survive. Alternatively, since anhydrite phenocrysts preserved in fresh volcanic rocks are characteristically intergrown with apatite phenocrysts, the former presence of anhydrite phenocrysts can be recognized based on the occurrence of lath-shaped cavities that show a strong spatial association with apatite phenocrysts. These cavities can be either empty or filled with low-temperature, secondary minerals such as zeolites, carbonates, or microcrystalline silica. A systematic search for the occurrence of such cavities, combined with optical and Raman-spectroscopic identification of anhydrite inclusions preserved within apatite, hornblende and quartz phenocrysts, demonstrates that most of the Laramide-age magmas associated with the Santa Rita and Hanover-Fierro porphyry-skarn Cu (Zn, Mo, Au, Pb) deposits were saturated in magmatic anhydrite. The anhydrite typically coexisted with monosulfide solid solution (MSS), suggesting oxygen fugacities of ~2.0±0.5 log units above the fayalite-magnetite-quartz buffer. The magmas range from andesitic to rhyodacitic in composition, and from shortly pre-mineralization (~61 Ma) to shortly post-mineralization (~57 Ma) in age. In three samples with particularly well-recognizable former anhydrite phenocrysts, their modal abundance could be quantified based on high-resolution scans of polished hand specimens. The observed modal anhydrite abundances of 0.63–1.8 vol% translate into minimum magma sulfur contents of 0.20–0.56 wt% S. The highest sulfur content of 0.56 wt% S is difficult to reconcile with available anhydrite solubility models, but it could be reproduced in an anhydrite solubility experiment performed at 950 °C and 1.15 GPa on a natural latite containing 13.1 wt% dissolved H2O. The sample with the second-highest sulfur content of 0.26 wt% S requires ~10 wt% H2O in the silicate melt, and, consequently, a minimum pressure of ~0.5 GPa. Taken together, the results suggest that the magmas of the Central Mining District were extremely hydrous and thus originated from great depth. Indeed, their major element compositions and reconstructed H2O and S contents agree well with experimentally observed and numerically predicted compositions of residual silicate melts after 50–70 wt% crystallization of ordinary arc basalts at high pressure and high oxygen fugacities.

New Mexico↗
USGS2025

Component identification of solid biomass fuels using reflected light microscopy: Interlaboratory study 2

As nations transition toward sustainable energy systems , biomass has become a vital component of global energy portfolios. Derived from organic materials such as wood, agricultural residues, forestry byproducts, and organic waste, biomass is a renewable energy source with significant environmental and economic benefits. Responsible biomass energy production can improve waste management, reduce emissions of greenhouse gases, and mitigate environmental pollution. However, as the diversity of biomass-derived fuels increases, robust quality assessment methods are essential to ensure their efficiency, safety, and minimal environmental impact. Reflected light microscopy (RLM) is one such technique with the potential to complement conventional physico-chemical analyses by enabling a rapid identification of material constituents and impurities. To refine this methodology and evaluate the reproducibility of solid biomass component identification using RLM, an interlaboratory study (ILS) was conducted. The study involved the recognition of 58 components across 45 photomicrographs, with the participation of 65 scientists and students from 25 countries. The participants faced high difficulty identifying some of the marked components, and as a result, the percentage of correct answers ranged from 19.0 % to 98.3 %, with an average correct identification rate of 62.7 %. The most challenging aspects of the identification process included distinguishing between woody and non-woody (agro) biomass, accurately identifying petroleum-derived materials, and differentiating agro biomass from inorganic matter. The results suggest that while RLM is an important tool for characterizing solid biomass, further development of methodology guidelines and training are necessary to enhance its effectiveness. Future research should prioritize preparing detailed, image-rich, microscopic morphological descriptions of biomass fuel components, which could improve the accuracy and reliability of using RLM in biomass fuel characterization.

International Journal of Coal Geology↗
USGS2026

Small-volume tephra deposits of the May 1924 explosions from Halemaʻumaʻu, Kīlauea volcano, and their origin

More than 50 explosive eruptions occurred from Halemaʻumaʻu at Kīlauea volcano over 17 days from May 11 to 27, 1924. Ballistics weighing as much as 14,000 kg were ejected and most landed within 2 km of the vent. Fine ash made up a major component of the tephra and was dispersed tens of kilometers downwind. Draining of the Halemaʻumaʻu lava lake occurred in late February 1924, with the crater floor eventually subsiding by a further ∼70 m (to ∼180 m below the crater rim) by the time the first explosions took place during the night of May 10–11. The largest explosions occurred on May 17–18 and smaller explosions continued until May 27, at which point Halemaʻumaʻu had more than doubled in width and depth. The explosions generated plumes reaching up to ∼10 km high with ballistics ejected up to 2 km from the crater. Almost 100 years later, we investigate and characterize the preserved tephra deposits within ∼3 km of the 1924 crater rim. Grain size and shape analyses were performed on 202 samples collected from 34 tephra profiles using dynamic image analysis, with a subset of layers from nine tephra profiles used for componentry (200 grains per layer in the 0.5–1 mm size fraction). Additionally, we characterize the average diameters (using the five largest clasts) at 216 locations and measure the average diameters of 2291 ballistics (largest per ∼100 m 2 area). Physical descriptions from fieldwork and grain size distributions were used to subdivide the tephra layers into five lithofacies: coarse homogeneous, fine homogenous, red ash, accretionary lapilli-bearing, and finely laminated. Grain size versus shape data show a range of values that demonstrate most grains are dense, smooth, and equant, in alignment with lithic clasts dominating the tephra componentry. The fine grained and accretionary lapilli-bearing nature of some of these lithofacies confirms that water influenced the style of the explosions. However, we also note juvenile clasts within many of the tephra layers, indicating that many of the layers were formed during phreatomagmatic explosions (sensu stricto), despite the eruptive mechanism being dominantly phreatic. Juvenile clasts are more abundant higher in the tephra profiles, suggesting that juvenile magma was more involved later in the explosive sequence. Thermal and hydrologic modeling indicate that groundwater inflow into a short-lived, small-diameter volcanic conduit (10-m to 120-m-diameter used for modeling) during the 78–85 days preceding the first explosion provides a physically plausible mechanism for this eruptive sequence.

Hawaii↗
USGS2026

Effects of a low-lipid diet on the gut microbiome and head kidney transcriptome of juvenile Chinook Salmon

Objective Pacific salmon Oncorhynchus spp. reared in production hatcheries are typically fed high-lipid, energy-dense diets to achieve large size and high body condition prior to release. In contrast, juveniles in natural environments tend to consume low-lipid, high-protein diets, and fish reared for research or conservation purposes are sometimes fed diets that are formulated to mimic natural diets and promote wild-like phenotypes. Understanding how these alternative diets affect fish health beyond growth and body condition could ultimately contribute to improving hatchery fish fitness. Methods In this work, we evaluated changes in the fecal microbiome and gene expression of juvenile Chinook Salmon O. tshawytscha on a standard high-lipid hatchery diet versus a low-lipid diet formulated to mimic the nutrition profile of natural-origin fish. To evaluate the time scale at which diet alters the fecal microbiome, we collected longitudinal samples over a 12-week period and switched the diets of a subset of fish twice during the experiment. We used 16S ribosomal RNA gene amplicon sequencing to characterize fecal microbiome differences between fish on the two diets as well as hatchery-reared fish at a production hatchery, hatchery fish that had been captured after release into a stream, and natural-origin, stream-reared fish of similar ages. Additionally, we conducted RNA sequencing on head kidney samples from laboratory-reared fish to evaluate changes in gene expression in this important immune organ. Results We found that the low-lipid diet and the hatchery diet resulted in microbiomes that differed from the microbiome of natural-origin fish and from each other and that diet-driven changes to the microbiome could occur in under 14 d. The low-lipid diet did not result in a microbiome that resembled the microbiome of naturally produced fish. Instead, the low-lipid diet resulted in a microbiome community that was distinct from those of fish reared on the hatchery diet and fish sampled from the wild. The RNA sequencing results indicated differential enrichment of pathways related to immunity, metabolism, and hormone synthesis between fish that were fed the two experimental diets. Conclusions The results suggest that additional environmental factors influence the microbiome more strongly than diet formulation or that the low-lipid diet has a smaller effect on the microbiome than a natural, ­invertebrate-based diet. Given that the gut microbiome and systemic immune function contribute significantly to disease resistance, our findings highlight the importance of understanding how diets fed to fish in captivity may affect fish health beyond growth and body condition metrics.

Journal of Aquatic Animal Health↗
USGS2024

Hyperspectral (VNIR-SWIR) analysis of roll front uranium host rocks and industrial minerals from Karnes and Live Oak Counties, Texas Coastal Plain

VNIR-SWIR (400–2500 nm) reflectance measurements were made on the surfaces of various cores, cuttings and sample splits of sedimentary rocks from the Tertiary Jackson Group, and Catahoula, Oakville and Goliad Formations. These rocks vary in composition and texture from mudstone and claystone to sandstone and are known host rocks for roll front uranium occurrences in Karnes and Live Oak Counties, Texas. Spectral reflectance profiles, 569 in total, were reduced to 125 representative spectral signatures, which were analyzed using the U.S. Geological Survey's (USGS) Material Identification and Characterization Algorithm (MICA). MICA uses an automated continuum-removal procedure together with a least-squares linear regression to determine the fit of observed sample spectral absorption features to those of reference mineral standards in a spectral library. The reference minerals include various clay, mica, carbonate, ferric and ferrous iron minerals and their mixtures. In addition, absorption feature band-depth analysis was done to identify rock surfaces exhibiting absorption features related to uranium and zeolite minerals, which were not included in the command files used to execute MICA. Rocks from each of the four geologic units produced broadly similar spectral signatures as a result of comparable mineral compositions, but there were some notable differences. For example, Ca- and Na-montmorillonite was matched most frequently to the spectral absorption features in 2-μm (∼2000–2500 nm) wavelengths, while goethite occurred often at 1-μm (∼400–1000 nm) wavelengths. The latter is related to limonitic iron-staining in and around oxidized zones of the uranium roll front as described in previous papers. Rocks of the Jackson Group differed from those of the Catahoula, Oakville and Goliad units in that the former exhibited spectral features we interpret as being due to the presence of lignite-bearing mudstone layers. Goliad rocks exhibit spectral features related to dolomite, gypsum, anhydrite, and an unidentified green clay mineral that is possibly glauconite . Jackson Group rocks also exhibit weak but well-resolved absorption features at 964 and 1157 nm related to either or both zeolite minerals clinoptilolite and heulandite. These zeolite minerals and a few spectra exhibiting hydrous silica absorption features are indicative of alteration of volcanic glass in tuffaceous mudstone and claystone layers. A few sample spectra exhibited strong absorption features at around 1135 nm related to the uranium mineral coffinite. Both the 1135 nm coffinite and 1157 nm zeolite absorption features overlap somewhat, potentially making them difficult to distinguish without additional hyperspectral field, laboratory or remote sensing data. The results of this study were compared to mixtures of minerals described for ore, gangue and alteration minerals in deposit models for sandstone-hosted uranium, sedimentary bentonite and sedimentary zeolite. Use of these spectra can help facilitate mapping of both waste materials from the legacy mining of the above commodities, as well as future exploration and resource assessment activities.

Texas↗
USGS2025

Rapid emplacement of the Keaiwa Lava Flow of 1823 from the Great Crack in the Southwest Rift Zone of Kilauea volcano

The Keaīwa Lava Flow of 1823 in the Southwest Rift Zone of Kīlauea volcano is unusual for its expansive pāhoehoe sheet flow morphology and lack of constructive vent topography, despite having a similar tholeiitic basalt composition to other lavas erupted from Kīlauea. This lava flow issued from a ∼10-km-long continuous fissure now known as the Great Crack, and has an unusually thin sheet flow morphology with margin thicknesses of ∼15–110 cm (average of 42 cm). Based on field observations of the lava flow at its fissure vent (e.g., drain-back features), we propose that the Great Crack formed, or at least significantly widened, just prior to and syn-eruptively with this 1823 eruption. The absence of pyroclastic cones or spatter ramparts indicates that the eruption consisted of a rapid outpouring of relatively degassed lava as the fissure unzipped. The rapidly moving lava flow overtopped pre-existing tumuli and scoria cones (e.g., Lava Plastered Cones) up to ∼10 m tall. Glass and whole-rock chemistry yield homogeneous compositions for the lavas erupted from the Great Crack, with glass compositions of 6.40 ± 0.10 wt% MgO and whole-rock compositions of 7.39 ± 0.07 wt% MgO. Lava pads erupted from a short western fissure system are richer in mafic minerals (e.g., olivine and clinopyroxene), and show slightly more MgO-rich whole-rock compositions (7.79 ± 0.05 wt%). MgO-in-glass thermometry on juvenile spatter yield eruption temperatures of 1153 ± 13°C that are typical of Kīlauea lavas. Thus, the extensive sheet-like lava flow morphology is not a direct consequence of unusual magmatic or rheological conditions (i.e., low viscosity). Instead, the flow morphology is associated with high effusion rates caused by sudden drainage of uprift magma as it erupted from the Great Crack. Lava flow modeling on a 2-m-resolution digital elevation model indicates that a minimum bulk effusion rate of ∼5800 m 3 /s (∼3500 m 3 /s dense rock equivalent) and a minimum flow velocity of ∼11 m/s are required for the lava flow to overcome the topography of the Lava Plastered Cones. This effusion rate is among the highest inferred for eruptions in Hawaiʻi and around the world. This study highlights a less frequent eruption style at Hawaiian volcanoes characterized by a sudden outpouring of lava from an unusual fissure system. Local eyewitness accounts indicate that the 1823 eruption was preceded by seismicity. Given the complex magmatic-volcanic-tectonic relations across Kīlauea, we speculate that the south flank could have slipped over one or more events that ultimately triggered unzipping of the Great Crack and passive release of briefly stored uprift magma. An eruption similar to 1823 at Kīlauea or Mauna Loa, with an eruptive timeframe that could be as short as an hour, with high effusion rates and rapid flow front velocities, would not easily allow for a timely response.

Hawaii↗
USGS2024

Diel temperature signals track seasonal shifts in localized groundwater contributions to headwater streamflow generation at network scale

Groundwater contributions to streamflow sustain aquatic ecosystem resilience; streams without significant groundwater inputs often have well-coupled air and water temperatures that degrade cold-water habitat during warm low flow periods. Widespread uncertainty in stream-groundwater connectivity across space and time has created disparate predictions of energy and nutrient fluxes across headwater networks, hindering predictions of cold-water habitat resilience under climate change scenarios. Recently, annual paired air and water temperature signals have been harnessed to indicate stream water thermal sensitivity and the dominance of deep versus shallow groundwater influence, although the utility of diel air–water temperature signal metrics for hydrologic inference has remained unexplored. Here we analyzed two consecutive years of locally paired, air–water temperature data from 47 headwater stream sites in the Catskill Mountains, New York, USA, and discovered characteristic seasonal patterns in diel temperature signal sinusoid metrics (amplitude ratio, phase lag, and mean ratio) driven by shifts in streamflow generation mechanisms and stream network position. Hydrologic interpretations of observed patterns were supported by stream heat budget model scenarios and additional analysis of paired air–water temperature data from two streams in Shenandoah National Park, Virginia, USA, with well characterized stream-groundwater connectivity. We found that within smaller tributaries, streamflow generation transitions from runoff to groundwater dominance were driven by hillslope drying during seasonal periods of lower precipitation. This was evidenced by significant correlations (p < 0.01) between daily water:air temperature signal amplitudes (non-linear decreases of ∼ 50 %) and derived base-flow index at 22 of the 28 sites, indicating enhanced local groundwater influence on streamflow promotes decoupling of diel air–water temperature signals. Additionally, ratios between daily water:air temperature signal means were lower in tributaries (∼0.68) when compared to main-stem (∼0.8) sites, increasing linearly throughout the observational period. In conceptual stream heat budget models, groundwater inflow had minimal effects on daily phase lags (∼0.2 hr), but increases in fractional groundwater discharge (0–50 %) depressed daily amplitude (∼20 % to 50 %) and mean ratios (∼15 %), supporting the sensitivity of daily metrics to interpreted changes in seasonal groundwater contributions to streamflow. During observational periods (i.e., April through October 2021 and 2022), significant differences (p < 0.01) between tributary and main-stem air–water metrics occurred when base-flow contributions were highest (∼0.93 vs. ∼ 0.68), as sites lower in the network had daily temperature metrics dominated by stream channel thermal inertia, rather than local groundwater connectivity, showing enhanced air–water diel signal coupling during warmer, drier periods. Divergent air temperature coupling across the network was interpreted as being driven by distance from local groundwater source zones, additional lateral groundwater inflows do not contribute a meaningful fraction to channel discharge lower in the network. Given the growing footprint of stream temperature observations, diel air–water temperature signals can provide distributed metrics sensitive to upstream groundwater discharge. Consequently, these metrics can support ongoing efforts by resource managers and researchers seeking to forecast the resilience of cold-water habitat to climate warming and changing precipitation regimes in mountain headwater streams.

New York, Virginia↗
USGS2026

Uncertainty quantification of geologic energy storage in depleted gas reservoirs using material balance equations embedded in a hierarchical errors-in-variables model

The storage potential for gas in geologic settings, such as depleted hydrocarbon reservoirs and solution-mined salt caverns, is becoming salient to future energy infrastructure planning. Technologies such as carbon capture, utilization, and storage, carbon dioxide-enhanced oil recovery, and natural gas and hydrogen storage help meet growing energy demands, reduce carbon emissions to meet climate goals, and provide energy security amid geopolitical uncertainties. Therefore, estimates of underground gas storage capacity could be useful for efficiently navigating the energy transitions. Material balance is a fundamental method in reservoir engineering for estimating original gas in place and potential storage capacity at the scale necessary for national assessments of subsurface pore space resources. However, the deterministic method cannot accommodate multiple data sources or quantify uncertainty in predictions. In this study, a method that embeds material balance equations within a hierarchical errors-in-variables model is proposed which allows the estimation of the distributions of reservoir properties needed for assessments. Uncertainties associated with these reservoir properties have traditionally been expert-elicited, whereas the uncertainty estimates from the proposed models are data-driven. Capacity and uncertainty estimates can be used in a probabilistic resource assessment, supplementing information traditionally used by assessors or even replacing this expert elicitation step when data are unavailable. Various regression models are compared in a case study of the Michigan Basin, a large contributor to the United States’ current natural gas storage capacity. In particular, errors-in-variables models help ameliorate regression dilution and can quantify uncertainty in predictions of pressure in addition to storage capacity. Overfitting is addressed by quantifying generalization error and model averaging in simple and stratified cross-validation against reported working gas capacity, representing the varying quality and quantity of available data. Incorporating a statistical framework into existing numerical methods in reservoir engineering can improve the quality of estimation, and in particular, this method brings rigor to uncertainty quantification as part of a larger effort by the U.S. Geological Survey to assess domestic energy gas storage resources in depleted hydrocarbon reservoirs.

Mathematical Geosciences↗
USGS2025

Melt generation sources and conditions in the wake of a migrating slab window: Geochemistry and petrology of the million-year history of primitive volcanism at Clear Lake volcanic field, California

Clear Lake volcanic field (CLVF) is the northernmost and youngest (~2.2 Ma to 8 ka) of the volcanic centers distributed along the San Andreas transform fault in western California. The initial phase of CLVF volcanism (interval one) occurred between ~2.2 and 1.3 Ma and extends ~35 km southeast of Clear Lake, forming a semi-continuous upland plateau capped by lava flows, with isolated volcanic remnants on the periphery. This volcanism is broadly characterized by geochemically primitive compositions that reflect three source compositions and conditions of melt generation. (1) Partial melting of upwelling asthenospheric mantle lherzolite at moderate pressures (1.2–1.4 GPa) and temperatures (1297–1329 °C) produced high-CaO (9.8–11.3 wt %) basalts with high Al 2 O 3 (16.8–17.6 wt %), Mg#s (66–70), MgO (8–10 wt %), Ni (103–262 μg/g), and Cr (284–609 μg/g). These high-CaO basalts contain olivine (Fo 87–91 ) phenocrysts with Cr-spinel inclusions ± subordinate plagioclase and crop out only in the southern part of the CLVF. (2) Partial melting of depleted sub-continental lithospheric mantle harzburgite at variable pressures (0.7–1.5 GPa) and temperatures (1097–1299 °C) produced a compositional continuum of med-K 2 O, calc-alkaline, high-MgO basalts through high-MgO andesites with high Mg#s (67–77), MgO (8–14 wt %) and high Ni and Cr abundances (154–439 and 340–1124 μg/g, respectively). Mineral assemblages are olivine (Fo 88–93 ) with Cr-spinel inclusions ± subordinate clinopyroxene, orthopyroxene and plagioclase. Small (<2.5 cm) mantle harzburgite xenoliths and mantle olivine xenocrysts are also found in several of these samples. These high-MgO basalts through andesites represent the largest volume of primitive compositions and have erupted predominantly along the main, fault-controlled northwest-southeast trending axis of volcanism with peripheral outcrops to the north, west, and east. (3) Partial melting of the Gorda eclogite slab edge produced adakitic silicic slab melts with strong depletion in the heavy rare earth elements (Yb = 0.6 μg/g). Subsequent reaction of those melts with depleted ultramafic rocks during ascent imprinted the adakitic dacites with high Mg#s (65–78) and elevated Ni (117–210 μg/g) and Cr (191–283 μg/g). Phenocrysts of orthopyroxene (En 87–94 ) with spinel inclusions (Cr# = 80–88) and extremely Ni-rich (9483 μg/g) olivine cores (Fo 84–93 ) record those reactions. Small-volume outcrops of the adakites on the eastern periphery of the CLVF track the passing slab edge. The trio of melting sources recorded by early CLVF magmatism reflect the tectonically complex environment and the hot (1097–1329 °C), shallow (0.7–1.5 GPa) melting conditions for these primitive compositions and provide estimates of the heat delivered to the crust. Over time, this flux led to maturation of the CLVF magmatic system toward the more voluminous and silicic volcanism that characterizes the balance of its subsequent volcanic history and maintains the present-day anomalously high heat flow in the region. The current interval (interval four) of volcanic activity at CLVF is characterized by low-volume, fault-controlled eruptions of basaltic andesite and andesite suggestive of mantle magma and heat delivery to the crust, similar to interval one. This analogous activity provides motivation for the current study and begs the question of whether the system is undergoing thermal priming for renewed silicic volcanism.

California↗
USGS2026

Bathymetric maps, surface areas, and storage capacities of Council Grove Lake and Marion Reservoir, Kansas, and Pine Creek Lake, Oklahoma, 2024

The U.S. Geological Survey, in cooperation with the U.S. Army Corps of Engineers, completed high-resolution multibeam bathymetric surveys to compute new elevation-area-capacity tables for Council Grove Lake and Marion Reservoir, Kansas, and Pine Creek Lake, Oklahoma. Elevation-area-capacity tables identify the relation between the water-surface elevation, surface area, and storage capacity of the lake. The surface areas and storage capacities of each lake were computed from bathymetric surfaces combining multibeam echo sounder data collected in 2024 and light detection and ranging point-cloud data collected in 2016 and 2018.

Kansas, Oklahoma↗
USGS2024

Land-use interactions, Oil-Field infrastructure, and natural processes control hydrocarbon and arsenic concentrations in groundwater, Poso Creek Oil Field, California, USA

Like many hydrocarbon production areas in the U.S., the Poso Creek Oil Field in California includes and is adjacent to other land uses (agricultural and other developed lands) that affect the hydrology and geochemistry of the aquifer overlying and adjacent to oil development. We hypothesize that the distributions of hydrocarbons and arsenic in groundwater in such areas will be controlled by complex interactions between mixed land uses, oil-field infrastructure, and natural processes. In 2020–2021, samples of groundwater and surface water were collected and analyzed for a large suite of inorganic and organic chemicals and isotope and gas tracers to test this hypothesis. Those data are supplemented with ancillary data on historical geochemistry, hydrology, geology, and oil-field infrastructure. Hydrocarbons in groundwater (e.g., methane through pentane gases and benzene) are associated with natural processes (e.g., fault offsets or transition in sediment depositional environment) and oil-field infrastructure (e.g., fluid-migration pathways associated with uncemented annulus in oil wells or unlined pits). Arsenic concentrations >10 μg per liter (μg/L; maximum concentration 12.9 μg/L) are associated with natural processes in old, high-pH groundwater, and more recent recharge of water from natural and/or engineered recharge processes. Along the southwest margin of the oil field, pumping for drinking-water and irrigation supplies in combination with engineered groundwater recharge produce a depression in groundwater elevations where groundwater with elevated sulfate concentrations from agricultural areas and groundwater with hydrocarbons from the oil field mix to produce a zone of sulfate reduction that removes hydrocarbons and arsenic from groundwater but produces elevated sulfide (S 2- ) concentrations (maximum concentration 29 mg per liter, mg/L). In this study, multiple approaches were required to resolve the overlapping effects of land uses, oil-field infrastructure, and natural processes on the distributions of hydrocarbons and arsenic in groundwater. The combined use of geographic, historical, physical, chemical, isotopic, and other information to constrain processes could be a useful approach for studies in other hydrocarbon-production areas. This is particularly important where land uses affect aquifer hydrology to an extent that causes mixing of groundwaters with different chemical compositions.

California↗
USGS2024

The 3D Elevation Program—Supporting Ohio's economy

Introduction High-quality elevation data are proving to be a resource of great economic value in dealing with many important issues in Ohio. Current and accurate high-resolution elevation data support flood risk management, water quantity and quality assessment, precision farming, conservation planning, impervious-surface modeling, forest and other natural resources management, abandoned mine and geologic hazard assessment, karst mapping, and siting of wellhead pads for horizontal drilling. These data also support coastal zone management, traffic safety and preliminary engineering site-selection studies for transportation infrastructure, solar potential and other renewable energy planning, aviation safety, and identification of features of interest or concern such as archaeological sites and orphan oil and gas wells. Critical applications that meet the State’s management needs depend on light detection and ranging (lidar) data that provide a highly detailed three-dimensional (3D) model of the Earth’s surface and aboveground features.

Ohio↗
USGS2024

A robust quantitative method to distinguish runoff-generated debris flows from floods

Debris flows and floods generated by rainfall runoff occur in rocky mountainous landscapes and burned steeplands. Flow type is commonly identified post-event through interpretation of depositional structures, but these may be poorly preserved or misinterpreted. Prior research indicates that discharge magnitude is commonly amplified in debris flows relative to floods due to volumetric bulking and increased frictional resistance. Here, we use this flow amplification to develop a metric ( Q* ) to separate debris flows from floods based on the ratio of observed peak discharge to the theoretical maximum water discharge from rainfall runoff. We compile 642 observations of floods and debris flows and demonstrate that Q* distinguishes flow type to ∼92% accuracy. Q* allows for accurate identification of debris flows through simple channel cross-section surveys rather than through qualitative interpretation of deposits, and therefore should increase the performance of models and engineered structures that require accurate flow-type observations.

Geophysical Research Letters↗
USGS2024

Effective site coefficients for the 2024 International Building Code (IBC)

The U.S. National Seismic Hazard Models (NSHMs), developed by the U.S. Geological Survey (USGS), have long been the scientific foundation of seismic design guidelines and have been used to compute design ground motions for construction of new buildings and retrofit of existing buildings in the United States and its territories. The 2018 NSHM is adopted by the 2024 International Building Code (IBC). Prior to the 2018 NSHM update, hazard calculations were required only at one reference site condition defined by V S30 =760 m/s (where V S30 is the time-averaged shear wave velocity from the surface to a depth of 30 m) and three periods (peak ground acceleration, PGA, and pseudo spectral accelerations at periods of 0.2 and 1 s, S s and S 1 ). Site coefficients, F PGA , F a , and F v , were then defined by the Building Seismic Safety Council (BSSC) Provisions Update Committee (PUC) in the site-specific procedures of National Earthquake Hazard Reduction Program (NEHRP) Recommended Seismic Provisions to calculate ground motions for other site classes with different V S30 values at the given periods. The design ground motions at other periods were then estimated using a generic spectral shape that was also defined by the BSSC PUC in NEHRP provisions. In recent years, the engineering community has realized there were deficiencies with the F a and F v site coefficients and the generic spectral shape. To avoid potentially dangerous underestimations of design ground motions for long period structures on soft site conditions in high seismicity regions, the BSSC PUC recommended the use of multi-period response spectra (MPRS) in 2017. As a result, the USGS produced multi-period and multi-V S30 response spectral values in the 2018 NSHM for calculations of design ground motions and the site coefficients F a and F v were eliminated from the 2020 NEHRP Provisions. As these site coefficients were widely used inside and outside of the United States, in this study we back-calculate the “effective” site coefficients F a,eff , and F v,eff by comparing MPRS for various site classes with the MPRS for the reference site condition, and discuss the changes that are observed in the 2024 IBC compared to its previous version in 2021. The effective site coefficients are presented for test site locations and their dependence on various factors including period, ground motion intensity, and regional models are discussed. Ratio maps between the new effective site coefficients and the old ones are then presented for soft site classes and for short and long periods. For soft site classes at short periods, the new effective site coefficients are lower than the old site coefficients for high seismicity regions and higher for low seismicity regions. As it was expected, for soft site classes at long periods and high seismicity regions, the new effective site coefficients are much larger than the old site coefficients without imposing the 50% increase as a penalty that was suggested in the 2021 IBC, whereas they could be much smaller if the 50% increase would have been imposed particularly around New Madrid and Charleston high seismicity regions. For low seismicity regions, the long period effective site coefficients can be smaller or larger by 20% compared to the 2021 IBC coefficients.

Conference Paper↗
USGS2024

Constraining the earthquake recording threshold of intraslab earthquakes with turbidites in southcentral Alaska’s lakes and fjords

Strong ground motion from intraslab earthquakes, which do not produce primary paleoseismic evidence, may initiate gravity-driven turbidity flows in subaqueous basins. The resulting deposits (turbidites) can provide a paleoseismic proxy if the conditions that initiate these flows are known. To better constrain the initiating conditions, we use two recent intraslab earthquakes in southcentral Alaska, the M w 7.1 30 November 2018 Anchorage earthquake and the M w 7.1 24 January 2016 Iniskin earthquake, as calibration events. Through a multilake investigation, we document the occurrence, or the absence, of earthquake-generated turbidity flows from these two events. Both earthquakes are recorded by centimeter-scale turbidites that can be differentiated from climatically generated deposits, as well as other seismic sources based on deposit thickness, sedimentological properties, and deposit age. We show that a Modified Mercalli Intensity (MMI) of ∼V–V1/2 is the minimum shaking intensity required to generate localized sediment remobilization from deltaic slopes, and an MMI of ∼V1/2 is required to produce a deposit of sufficient thickness that a seismic origin can be confidently assigned. The documentation of seismically generated deposits in quick succession (∼2 years) with diagnostic features highlights the utility of using recent earthquakes as calibration events to investigate the subaqueous response to strong ground motion.

Alaska↗
USGS2026

Stress states on the eve of past earthquakes inform earthquake rupture through fault complexity along the San Andreas and San Jacinto faults

Estimating the evolving state of stress along active fault systems can provide insight into the conditions that generated past ground‐rupturing earthquakes and influenced their ability to propagate through areas of geometric complexity, such as fault branches and stepovers. We use quasi‐static forward numerical models that incorporate the 3D complex configuration of active faults in southern California to estimate shear tractions on the geometrically complex southern San Andreas and San Jacinto faults from 1000 to 1900 C.E. These tractions include interseismic accumulation of traction due to tectonic loading, viscoelastic relaxation of shear stress within the upper crust between earthquakes, and effects of other earthquakes on the fault network. We simulate ground‐rupturing earthquakes based on the along‐strike earthquake extents modeled by Scharer and Yule (2020) , assuming that stress drop is complete in each earthquake. We use Monte Carlo simulations to estimate uncertainty in evolving shear tractions due to uncertainties in earthquake timing and in upper‐crustal viscosity. Pre‐earthquake shear tractions typically do not exceed ∼2 MPa. Although ruptures with length <200 km have pre‐earthquake shear tractions that range from near zero to ∼1.75 MPa, these tractions are not less than ∼0.4 MPa for earthquakes with rupture length >200 km. Earthquakes with long (>200 km) ruptures occur only in the single‐stranded part of the system, whereas those with short (<125 km) rupture length and high pre‐earthquake shear traction occur near fault stepovers and branches. This suggests that high accumulated shear traction encourages longer rupture propagation, but may not be sufficient to overcome geometric complexities. This modeling approach informs our understanding of rupture propagation and provides estimates of fault shear tractions that are unavailable from direct measurements.

Callifornia↗